diff options
Diffstat (limited to 'dts/src/arm/rk3288-rock2-square.dts')
| -rw-r--r-- | dts/src/arm/rk3288-rock2-square.dts | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/dts/src/arm/rk3288-rock2-square.dts b/dts/src/arm/rk3288-rock2-square.dts deleted file mode 100644 index cdcdc921ee..0000000000 --- a/dts/src/arm/rk3288-rock2-square.dts +++ /dev/null @@ -1,288 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; -#include <dt-bindings/input/input.h> -#include "rk3288-rock2-som.dtsi" - -/ { - model = "Radxa Rock 2 Square"; - compatible = "radxa,rock2-square", "rockchip,rk3288"; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-recovery { - label = "Recovery"; - linux,code = <KEY_VENDOR>; - press-threshold-microvolt = <0>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power { - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Power"; - linux,code = <KEY_POWER>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_key>; - wakeup-source; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - heartbeat { - gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; - label = "rock2:green:state1"; - linux,default-trigger = "heartbeat"; - }; - - mmc { - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; - label = "rock2:blue:state2"; - linux,default-trigger = "mmc0"; - }; - }; - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "SPDIF"; - simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ - cpu { sound-dai = <&spdif>; }; - codec { sound-dai = <&spdif_out>; }; - }; - }; - - sata_pwr: sata-prw-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&sata_pwr_en>; - /* Always turn on the 5V sata power connector */ - regulator-always-on; - regulator-name = "sata_pwr"; - }; - - spdif_out: spdif-out { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - sound-i2s { - compatible = "rockchip,rk3288-hdmi-analog"; - pinctrl-names = "default"; - pinctrl-0 = <&phone_ctl>, <&hp_det>; - rockchip,audio-codec = <&es8388>; - rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; - rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; - rockchip,i2s-controller = <&i2s>; - rockchip,model = "I2S"; - rockchip,routing = "Analog", "LOUT2", - "Analog", "ROUT2"; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&hym8563>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; - }; - - vcc_usb_host: vcc-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc_host"; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_io>; - }; -}; - -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vcc_18>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; /* wp not hooked up */ - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&gmac { - status = "ok"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - hym8563: hym8563@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - - }; -}; - -&i2c2 { - status = "okay"; - - es8388: es8388@10 { - compatible = "everest,es8388", "everest,es8328"; - reg = <0x10>; - AVDD-supply = <&vccio_codec>; - DVDD-supply = <&vccio_codec>; - HPVDD-supply = <&vccio_codec>; - PVDD-supply = <&vccio_codec>; - clocks = <&cru SCLK_I2S0_OUT>; - }; -}; - -&i2c5 { - status = "okay"; -}; - -&i2s { - status = "okay"; -}; - -&pinctrl { - ir { - ir_int: ir-int { - rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - keys { - pwr_key: pwr-key { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - headphone { - hp_det: hp-det { - rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - phone_ctl: phone-ctl { - rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sata { - sata_pwr_en: sata-pwr-en { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio { - wifi_enable: wifi-enable { - rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&saradc { - status = "okay"; -}; - -&spdif { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usbphy1 { - vbus-supply = <&vcc_usb_host>; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; |