diff options
Diffstat (limited to 'dts/src/arm/st/stm32mp135f-dk.dts')
| -rw-r--r-- | dts/src/arm/st/stm32mp135f-dk.dts | 68 |
1 files changed, 30 insertions, 38 deletions
diff --git a/dts/src/arm/st/stm32mp135f-dk.dts b/dts/src/arm/st/stm32mp135f-dk.dts index f0900ca672..eea740d097 100644 --- a/dts/src/arm/st/stm32mp135f-dk.dts +++ b/dts/src/arm/st/stm32mp135f-dk.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> #include "stm32mp135.dtsi" #include "stm32mp13xf.dtsi" #include "stm32mp13-pinctrl.dtsi" @@ -65,45 +66,13 @@ default-state = "off"; }; }; - - v3v3_sw: v3v3-sw { - compatible = "regulator-fixed"; - regulator-name = "v3v3_sw"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_adc: vdd-adc { - compatible = "regulator-fixed"; - regulator-name = "vdd_adc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sd: vdd-sd { - compatible = "regulator-fixed"; - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - - vdd_usb: vdd-usb { - compatible = "regulator-fixed"; - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; }; &adc_1 { pinctrl-names = "default"; pinctrl-0 = <&adc1_usb_cc_pins_a>; - vdda-supply = <&vdd_adc>; - vref-supply = <&vdd_adc>; + vdda-supply = <&scmi_vdd_adc>; + vref-supply = <&scmi_vdd_adc>; status = "okay"; adc1: adc@0 { status = "okay"; @@ -195,6 +164,29 @@ status = "okay"; }; +&scmi_regu { + scmi_vdd_adc: regulator@10 { + reg = <VOLTD_SCMI_STPMIC1_LDO1>; + regulator-name = "vdd_adc"; + }; + scmi_vdd_usb: regulator@13 { + reg = <VOLTD_SCMI_STPMIC1_LDO4>; + regulator-name = "vdd_usb"; + }; + scmi_vdd_sd: regulator@14 { + reg = <VOLTD_SCMI_STPMIC1_LDO5>; + regulator-name = "vdd_sd"; + }; + scmi_v1v8_periph: regulator@15 { + reg = <VOLTD_SCMI_STPMIC1_LDO6>; + regulator-name = "v1v8_periph"; + }; + scmi_v3v3_sw: regulator@19 { + reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>; + regulator-name = "v3v3_sw"; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; @@ -204,7 +196,7 @@ disable-wp; st,neg-edge; bus-width = <4>; - vmmc-supply = <&vdd_sd>; + vmmc-supply = <&scmi_vdd_sd>; status = "okay"; }; @@ -321,7 +313,7 @@ hub@1 { compatible = "usb424,2514"; reg = <1>; - vdd-supply = <&v3v3_sw>; + vdd-supply = <&scmi_v3v3_sw>; }; }; @@ -342,7 +334,7 @@ }; &usbphyc_port0 { - phy-supply = <&vdd_usb>; + phy-supply = <&scmi_vdd_usb>; st,current-boost-microamp = <1000>; st,decrease-hs-slew-rate; st,tune-hs-dc-level = <2>; @@ -356,7 +348,7 @@ }; &usbphyc_port1 { - phy-supply = <&vdd_usb>; + phy-supply = <&scmi_vdd_usb>; st,current-boost-microamp = <1000>; st,decrease-hs-slew-rate; st,tune-hs-dc-level = <2>; |