diff options
Diffstat (limited to 'dts/src/arm/ste-href-stuib.dtsi')
| -rw-r--r-- | dts/src/arm/ste-href-stuib.dtsi | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/dts/src/arm/ste-href-stuib.dtsi b/dts/src/arm/ste-href-stuib.dtsi deleted file mode 100644 index e32d0c36fe..0000000000 --- a/dts/src/arm/ste-href-stuib.dtsi +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2012 ST-Ericsson AB - */ - -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>; - - button@139 { - /* Proximity sensor */ - gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; - linux,code = <11>; /* SW_FRONT_PROXIMITY */ - label = "SFH7741 Proximity Sensor"; - }; - button@145 { - /* Hall sensor */ - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; - linux,code = <0>; /* SW_LID */ - label = "HED54XXU11 Hall Effect Sensor"; - }; - }; - - soc { - i2c@80004000 { - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio6>; - interrupt-controller; - vcc-supply = <&db8500_vsmps2_reg>; - vio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&stmpe_stuib_mode>; - - wakeup-source; - st,autosleep-timeout = <1024>; - - stmpe_keypad { - compatible = "st,stmpe-keypad"; - - debounce-interval = <64>; - st,scan-count = <8>; - st,no-autorepeat; - - linux,keymap = <0x205006b - 0x4010074 - 0x3050072 - 0x1030004 - 0x502006a - 0x500000a - 0x5008b - 0x706001c - 0x405000b - 0x6070003 - 0x3040067 - 0x303006c - 0x60400e7 - 0x602009e - 0x4020073 - 0x5050002 - 0x4030069 - 0x3020008>; - }; - }; - }; - - /* Sensors mounted on this board variant */ - i2c@80128000 { - lis331dl@1c { - /* Accelerometer */ - compatible = "st,lis331dl-accel"; - st,drdy-int-pin = <1>; - reg = <0x1c>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&accel_stuib_mode>; - interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>, - <19 IRQ_TYPE_EDGE_RISING>; - }; - ak8974@f { - /* Magnetometer */ - compatible = "asahi-kasei,ak8974"; - reg = <0x0f>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&magneto_stuib_mode>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - }; - }; - - i2c@80110000 { - bu21013_tp@5c { - compatible = "rohm,bu21013_tp"; - reg = <0x5c>; - avdd-supply = <&ab8500_ldo_aux1_reg>; - - rohm,touch-max-x = <384>; - rohm,touch-max-y = <704>; - rohm,flip-y; - pinctrl-names = "default"; - pinctrl-0 = <&touch_rohm_mode>; - }; - - bu21013_tp@5d { - compatible = "rohm,bu21013_tp"; - reg = <0x5d>; - avdd-supply = <&ab8500_ldo_aux1_reg>; - - rohm,touch-max-x = <384>; - rohm,touch-max-y = <704>; - rohm,flip-y; - pinctrl-names = "default"; - pinctrl-0 = <&touch_rohm_mode>; - }; - }; - - pinctrl { - /* Pull up this GPIO pin */ - stmpe { - stmpe_stuib_mode: stmpe_stuib { - stuib_cfg { - ste,pins = "GPIO218_AH11"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - prox { - prox_stuib_mode: prox_stuib { - stuib_cfg { - pins = "GPIO217_AH12"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - hall { - hall_stuib_mode: stuib_tvk { - stuib_cfg { - pins = "GPIO145_C13"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - accelerometer { - accel_stuib_mode: accel_stuib { - /* Accelerometer interrupt lines 1 & 2 */ - stuib_cfg { - pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - magnetometer { - magneto_stuib_mode: magneto_stuib { - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ - stuib_cfg1 { - pins = "GPIO31_V3"; - ste,config = <&gpio_in_pu>; - }; - stuib_cfg2 { - pins = "GPIO32_V2"; - ste,config = <&gpio_in_pd>; - }; - }; - }; - touch { - touch_rohm_mode: touch_rohm { - /* - * ROHM touch screen uses GPIO 143 for - * RST1, GPIO 146 for RST2 and - * GPIO 67 for interrupts. Pull-up - * the IRQ line and drive both - * reset signals low. - */ - stuib_cfg1 { - pins = "GPIO143_D12", "GPIO146_D13"; - ste,config = <&gpio_out_lo>; - }; - stuib_cfg2 { - pins = "GPIO67_G2"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - }; - - mcde@a0350000 { - status = "okay"; - - dsi@a0351000 { - panel { - compatible = "samsung,s6d16d0"; - reg = <0>; - vdd1-supply = <&ab8500_ldo_aux1_reg>; - reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - }; - }; - }; -}; |