diff options
Diffstat (limited to 'dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts')
| -rw-r--r-- | dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts b/dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts new file mode 100644 index 0000000000..18b29c6b86 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) Jisheng Zhang <jszhang@kernel.org> + */ + +/dts-v1/; + +#include "sun50i-h618-longan-module-3h.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Sipeed Longan Pi 3H"; + compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618"; + + aliases { + ethernet0 = &emac0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */ + }; + + led-1 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */ + }; + }; + + reg_vcc5v: regulator-vcc5v { + /* board wide 5V supply directly from the USB-C socket */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; +}; + +&axp313 { + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +/* WiFi & BT combo module is connected to this Host */ +&ehci3 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + allwinner,rx-delay-ps = <3100>; + allwinner,tx-delay-ps = <700>; + phy-supply = <®_vcc3v3>; + status = "okay"; +}; + +&mdio0 { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usbotg { + /* + * PHY0 pins are connected to a USB-C socket, but a role switch + * is not implemented: both CC pins are pulled to GND. + * The VBUS pins power the device, so a fixed peripheral mode + * is the best choice. + * The board can be powered via GPIOs, in this case port0 *can* + * act as a host (with a cable/adapter ignoring CC), as VBUS is + * then provided by the GPIOs. Any user of this setup would + * need to adjust the DT accordingly: dr_mode set to "host", + * enabling OHCI0 and EHCI0. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + usb2_vbus-supply = <®_vcc5v>; + status = "okay"; +}; |