diff options
Diffstat (limited to 'dts/src/arm64/allwinner')
8 files changed, 268 insertions, 2 deletions
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts index 06a775c416..3e99a87e9c 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts @@ -9,3 +9,22 @@ model = "Pine64 PinePhone Braveheart (1.1)"; compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; }; + +&backlight { + power-supply = <®_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since + * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight + * being off is around 20%. Duty cycle for the lowest brightness level + * also varries quite a bit between individual boards, so the lowest + * value here was chosen as a safe default. + */ + brightness-levels = < + 774 793 814 842 + 882 935 1003 1088 + 1192 1316 1462 1633 + 1830 2054 2309 2596 + 2916 3271 3664 4096>; + num-interpolated-steps = <50>; + default-brightness-level = <400>; +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.2.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.2.dts new file mode 100644 index 0000000000..a9f5b670c9 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.2.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman <megous@megous.com> + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone (1.2)"; + compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; +}; + +&backlight { + power-supply = <®_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since 1.0, + * and the lowest PWM duty cycle that doesn't lead to backlight being off + * is around 10%. Duty cycle for the lowest brightness level also varries + * quite a bit between individual boards, so the lowest value here was + * chosen as a safe default. + */ + brightness-levels = < + 5000 5248 5506 5858 6345 + 6987 7805 8823 10062 11543 + 13287 15317 17654 20319 23336 + 26724 30505 34702 39335 44427 + 50000 + >; + num-interpolated-steps = <50>; + default-brightness-level = <500>; +}; + +&lis3mdl { + /* + * Board revision 1.2 fixed routing of the interrupt to DRDY pin, + * enable interrupts. + */ + interrupt-parent = <&pio>; + interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi index cefda145c3..25150aba74 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi @@ -16,6 +16,13 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + /* Backlight configuration differs per PinePhone revision. */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -84,6 +91,28 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; + status = "okay"; + + panel@0 { + compatible = "xingbangda,xbd599"; + reg = <0>; + reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */ + iovcc-supply = <®_dldo2>; + vcc-supply = <®_ldo_io0>; + backlight = <&backlight>; + }; +}; + &ehci0 { status = "okay"; }; @@ -92,11 +121,28 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt917s"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + AVDD28-supply = <®_ldo_io0>; + VDDIO-supply = <®_ldo_io0>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &i2c1 { status = "okay"; /* Magnetometer */ - lis3mdl@1e { + lis3mdl: lis3mdl@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; @@ -188,6 +234,10 @@ */ }; +&r_pwm { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -279,7 +329,7 @@ ®_dldo4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-name = "vcc-wifi-io"; }; diff --git a/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts index 2e2b14c0ae..8857a37915 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi> / { diff --git a/dts/src/arm64/allwinner/sun50i-h5-cpu-opp.dtsi b/dts/src/arm64/allwinner/sun50i-h5-cpu-opp.dtsi new file mode 100644 index 0000000000..b265720195 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h5-cpu-opp.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org> + +/ { + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <1000000 1000000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000 1040000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1080000 1080000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1120000 1120000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1160000 1160000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000 1200000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <1240000 1240000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1260000 1260000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-microvolt = <1300000 1300000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu_opp_table>; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts index 64d35daf20..d811df3328 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -4,6 +4,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include <arm/sunxi-libretech-all-h3-cc.dtsi> / { diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts index c95a685413..de19e68eb8 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -30,6 +30,21 @@ }; }; + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -48,6 +63,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -92,6 +111,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; @@ -103,3 +126,18 @@ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; + +&usb_otg { + /* + * According to schematics CN1 MicroUSB port can be used to take + * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB + * port cannot provide power externally even if the board is powered + * via GPIO pins. It thus makes sense to force peripheral mode. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi index 4462a68c06..6735e316a3 100644 --- a/dts/src/arm64/allwinner/sun50i-h5.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi @@ -3,6 +3,8 @@ #include <arm/sunxi-h3-h5.dtsi> +#include <dt-bindings/thermal/thermal.h> + / { cpus { #address-cells = <1>; @@ -13,6 +15,9 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -20,6 +25,9 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -27,6 +35,9 @@ device_type = "cpu"; reg = <2>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -34,6 +45,9 @@ device_type = "cpu"; reg = <3>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; }; @@ -165,6 +179,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal { |