diff options
Diffstat (limited to 'dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts')
-rw-r--r-- | dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts | 35 |
1 files changed, 15 insertions, 20 deletions
diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts index 201596247f..c431986e6a 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -67,7 +67,7 @@ regulator-always-on; }; - hdmi_p5v0: regulator-hdmi_p5v0 { + hdmi_p5v0: regulator-hdmi-p5v0 { compatible = "regulator-fixed"; regulator-name = "HDMI_P5V0"; regulator-min-microvolt = <5000000>; @@ -76,7 +76,7 @@ vin-supply = <&p5v0>; }; - tflash_vdd: regulator-tflash_vdd { + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; @@ -92,7 +92,7 @@ vin-supply = <&vddio_ao3v3>; }; - tf_io: gpio-regulator-tf_io { + tf_io: gpio-regulator-tf-io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; @@ -148,7 +148,7 @@ vin-supply = <&p5v0>; }; - ddr3_1v5: regulator-ddr3_1v5 { + ddr3_1v5: regulator-ddr3-1v5 { compatible = "regulator-fixed"; regulator-name = "DDR3_1V5"; regulator-min-microvolt = <1500000>; @@ -184,7 +184,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; @@ -250,21 +249,6 @@ }; }; -&gpio_ao { - /* - * WARNING: The USB Hub on the Odroid-C2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - hog-0 { - gpio-hog; - gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -414,5 +398,16 @@ }; &usb1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + hub@1 { + /* Genesys Logic GL852G USB 2.0 hub */ + compatible = "usb5e3,610"; + reg = <1>; + vdd-supply = <&p5v0>; + reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + }; }; |