diff options
Diffstat (limited to 'dts/src/arm64/freescale/fsl-ls1046a.dtsi')
-rw-r--r-- | dts/src/arm64/freescale/fsl-ls1046a.dtsi | 226 |
1 files changed, 130 insertions, 96 deletions
diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index 687fea6d8a..754a64be73 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/gpio/gpio.h> / { compatible = "fsl,ls1046a"; @@ -78,6 +79,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -112,7 +115,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&dcfg>; offset = <0xb0>; mask = <0x02>; @@ -272,6 +275,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; @@ -280,8 +285,8 @@ big-endian; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -341,7 +346,7 @@ <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -354,13 +359,12 @@ ranges = <0x0 0x00 0x1700000 0x100000>; reg = <0x00 0x1700000 0x0 0x100000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; sec_jr0: jr@10000 { compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; @@ -368,7 +372,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; @@ -376,7 +380,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; @@ -384,7 +388,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -413,6 +417,14 @@ ranges = <0x0 0x5 0x08000000 0x8000000>; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x1000>; @@ -433,47 +445,46 @@ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000023 - 0x00000001 0x00000029 - 0x00000002 0x0000002f - 0x00000003 0x00000036 - 0x00000004 0x0000003c - 0x00000005 0x00000042 - 0x00000006 0x00000049 - 0x00000007 0x0000004f - 0x00000008 0x00000055 - 0x00000009 0x0000005c - 0x0000000a 0x00000062 - 0x0000000b 0x00000068 + <0x00000000 0x00000023>, + <0x00000001 0x00000029>, + <0x00000002 0x0000002f>, + <0x00000003 0x00000036>, + <0x00000004 0x0000003c>, + <0x00000005 0x00000042>, + <0x00000006 0x00000049>, + <0x00000007 0x0000004f>, + <0x00000008 0x00000055>, + <0x00000009 0x0000005c>, + <0x0000000a 0x00000062>, + <0x0000000b 0x00000068>, /* Calibration data group 2 */ - 0x00010000 0x00000022 - 0x00010001 0x0000002a - 0x00010002 0x00000032 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000052 - 0x00010007 0x0000005a - 0x00010008 0x00000062 - 0x00010009 0x0000006a + <0x00010000 0x00000022>, + <0x00010001 0x0000002a>, + <0x00010002 0x00000032>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000052>, + <0x00010007 0x0000005a>, + <0x00010008 0x00000062>, + <0x00010009 0x0000006a>, /* Calibration data group 3 */ - 0x00020000 0x00000021 - 0x00020001 0x0000002b - 0x00020002 0x00000035 - 0x00020003 0x0000003e - 0x00020004 0x00000048 - 0x00020005 0x00000052 - 0x00020006 0x0000005c + <0x00020000 0x00000021>, + <0x00020001 0x0000002b>, + <0x00020002 0x00000035>, + <0x00020003 0x0000003e>, + <0x00020004 0x00000048>, + <0x00020005 0x00000052>, + <0x00020006 0x0000005c>, /* Calibration data group 4 */ - 0x00030000 0x00000011 - 0x00030001 0x0000001a - 0x00030002 0x00000024 - 0x00030003 0x0000002e - 0x00030004 0x00000038 - 0x00030005 0x00000042 - 0x00030006 0x0000004c - 0x00030007 0x00000056>; - big-endian; + <0x00030000 0x00000011>, + <0x00030001 0x0000001a>, + <0x00030002 0x00000024>, + <0x00030003 0x0000002e>, + <0x00030004 0x00000038>, + <0x00030005 0x00000042>, + <0x00030006 0x0000004c>, + <0x00030007 0x00000056>; #thermal-sensor-cells = <1>; }; @@ -492,49 +503,52 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; - dmas = <&edma0 1 39>, - <&edma0 1 38>; - dma-names = "tx", "rx"; + dmas = <&edma0 1 38>, + <&edma0 1 39>; + dma-names = "rx", "tx"; status = "disabled"; }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c2: i2c@21a0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c3: i2c@21b0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -683,7 +697,7 @@ big-endian; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, @@ -701,44 +715,55 @@ QORIQ_CLK_PLL_DIV(2)>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - sata: sata@3200000 { - compatible = "fsl,ls1046a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(2)>; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + }; }; msi1: msi-controller@1580000 { @@ -782,7 +807,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -794,6 +818,7 @@ <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -802,8 +827,11 @@ reg = <0x00 0x03400000 0x0 0x00100000>, <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; @@ -818,7 +846,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -830,6 +857,7 @@ <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -838,8 +866,11 @@ reg = <0x00 0x03500000 0x0 0x00100000>, <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; @@ -854,7 +885,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -866,6 +896,7 @@ <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -874,8 +905,11 @@ reg = <0x00 0x03600000 0x0 0x00100000>, <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; |