diff options
Diffstat (limited to 'dts/src/arm64/marvell/cn9130-crb.dtsi')
-rw-r--r-- | dts/src/arm64/marvell/cn9130-crb.dtsi | 55 |
1 files changed, 27 insertions, 28 deletions
diff --git a/dts/src/arm64/marvell/cn9130-crb.dtsi b/dts/src/arm64/marvell/cn9130-crb.dtsi index 1acd746284..6fcc34f7b4 100644 --- a/dts/src/arm64/marvell/cn9130-crb.dtsi +++ b/dts/src/arm64/marvell/cn9130-crb.dtsi @@ -78,9 +78,9 @@ compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>; - los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>; + los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; status = "okay"; }; @@ -120,7 +120,7 @@ "mpp59", "mpp60", "mpp61"; marvell,function = "sdio"; }; - cp0_spi0_pins: cp0-spi-pins-0 { + cp0_spi1_pins: cp0-spi-pins-1 { marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; }; @@ -170,7 +170,7 @@ &cp0_spi1 { pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; + pinctrl-0 = <&cp0_spi1_pins>; reg = <0x700680 0x50>, /* control */ <0x2000000 0x1000000>; /* CS0 */ status = "okay"; @@ -207,11 +207,9 @@ reg = <0>; }; - switch6: switch0@6 { + switch6: ethernet-switch@6 { /* Actual device is MV88E6393X */ compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; reg = <6>; interrupt-parent = <&cp0_gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; @@ -220,59 +218,59 @@ dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "p1"; phy-handle = <&switch0phy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "p2"; phy-handle = <&switch0phy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "p3"; phy-handle = <&switch0phy3>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "p4"; phy-handle = <&switch0phy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "p5"; phy-handle = <&switch0phy5>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "p6"; phy-handle = <&switch0phy6>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "p7"; phy-handle = <&switch0phy7>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "p8"; phy-handle = <&switch0phy8>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "p9"; phy-mode = "10gbase-r"; @@ -280,10 +278,11 @@ managed = "in-band-status"; }; - port@a { + ethernet-port@a { reg = <10>; - label = "cpu"; ethernet = <&cp0_eth0>; + phy-mode = "10gbase-r"; + managed = "in-band-status"; }; }; @@ -292,35 +291,35 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; |