diff options
Diffstat (limited to 'dts/src/arm64/marvell')
51 files changed, 4388 insertions, 1165 deletions
diff --git a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi new file mode 100644 index 0000000000..b5e042b8e9 --- /dev/null +++ b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For AC5. + * + * Copyright (C) 2021 Marvell + * Copyright (C) 2022 Allied Telesis Labs + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Marvell AC5 SoC"; + compatible = "marvell,ac5"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + internal-regs@7f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 16M internal register @ 0x7f00_0000 */ + ranges = <0x0 0x0 0x7f000000 0x1000000>; + dma-coherent; + + uart0: serial@12000 { + compatible = "snps,dw-apb-uart"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "okay"; + }; + + uart1: serial@12100 { + compatible = "snps,dw-apb-uart"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "snps,dw-apb-uart"; + reg = <0x12200 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "snps,dw-apb-uart"; + reg = <0x12300 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + mdio: mdio@22004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x22004 0x4>; + clocks = <&cnm_clock>; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cnm_clock>; + clock-names = "core"; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-1 = <&i2c0_gpio>; + scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "disabled"; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cnm_clock>; + clock-names = "core"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_gpio>; + scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "disabled"; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl0 0 0 32>; + marvell,pwm-offset = <0x1f0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio1: gpio@18140 { + reg = <0x18140 0x40>; + compatible = "marvell,orion-gpio"; + ngpios = <14>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl0 0 32 14>; + marvell,pwm-offset = <0x1f0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* + * Dedicated section for devices behind 32bit controllers so we + * can configure specific DMA mapping for them + */ + behind-32bit-controller@7f000000 { + compatible = "simple-bus"; + #address-cells = <0x2>; + #size-cells = <0x2>; + ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>; + /* Host phy ram starts at 0x200M */ + dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>; + dma-coherent; + + eth0: ethernet@20000 { + compatible = "marvell,armada-ac5-neta"; + reg = <0x0 0x20000 0x0 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cnm_clock>; + phy-mode = "sgmii"; + status = "disabled"; + }; + + eth1: ethernet@24000 { + compatible = "marvell,armada-ac5-neta"; + reg = <0x0 0x24000 0x0 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cnm_clock>; + phy-mode = "sgmii"; + status = "disabled"; + }; + + usb0: usb@80000 { + compatible = "marvell,orion-ehci"; + reg = <0x0 0x80000 0x0 0x500>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb1: usb@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0x0 0xa0000 0x0 0x500>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + pinctrl0: pinctrl@80020100 { + compatible = "marvell,ac5-pinctrl"; + reg = <0 0x80020100 0 0x20>; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c0"; + }; + + i2c0_gpio: i2c0-gpio-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "gpio"; + }; + + i2c1_pins: i2c1-pins { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "i2c1"; + }; + + i2c1_gpio: i2c1-gpio-pins { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "i2c1"; + }; + }; + + spi0: spi@805a0000 { + compatible = "marvell,armada-3700-spi"; + reg = <0x0 0x805a0000 0x0 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&spi_clock>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <1>; + status = "disabled"; + }; + + spi1: spi@805a8000 { + compatible = "marvell,armada-3700-spi"; + reg = <0x0 0x805a8000 0x0 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&spi_clock>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <1>; + status = "disabled"; + }; + + nand: nand-controller@805b0000 { + compatible = "marvell,ac5-nand-controller"; + reg = <0x0 0x805b0000 0x0 0x00000054>; + #address-cells = <0x1>; + #size-cells = <0x0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nand_clock>; + status = "disabled"; + }; + + gic: interrupt-controller@80600000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */ + <0x0 0x80660000 0x0 0x40000>; /* GICR */ + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + clocks { + cnm_clock: cnm-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <328000000>; + }; + + spi_clock: spi-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + nand_clock: nand-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; + }; +}; diff --git a/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts b/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts new file mode 100644 index 0000000000..f0ebdb84ee --- /dev/null +++ b/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For RD-AC5X. + * + * Copyright (C) 2021 Marvell + * Copyright (C) 2022 Allied Telesis Labs + */ +/* + * Device Tree file for Marvell Alleycat 5X development board + * This board file supports the B configuration of the board + */ + +/dts-v1/; + +#include "ac5-98dx35xx.dtsi" + +/ { + model = "Marvell RD-AC5X Board"; + compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5"; + + aliases { + serial0 = &uart0; + spiflash0 = &spiflash0; + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x2 0x00000000 0x0 0x40000000>; + }; + + usb1phy: usb-phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-handle = <&phy0>; +}; + +/* USB0 is a host USB */ +&usb0 { + status = "okay"; +}; + +/* USB1 is a peripheral USB */ +&usb1 { + status = "okay"; + phys = <&usb1phy>; + phy-names = "usb-phy"; + dr_mode = "peripheral"; +}; + +&spi0 { + status = "okay"; + + spiflash0: flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "spi_flash_part0"; + reg = <0x0 0x800000>; + }; + + parition@1 { + label = "spi_flash_part1"; + reg = <0x800000 0x700000>; + }; + + parition@2 { + label = "spi_flash_part2"; + reg = <0xF00000 0x100000>; + }; + }; +}; diff --git a/dts/src/arm64/marvell/ac5-98dx35xx.dtsi b/dts/src/arm64/marvell/ac5-98dx35xx.dtsi new file mode 100644 index 0000000000..2ab72f854b --- /dev/null +++ b/dts/src/arm64/marvell/ac5-98dx35xx.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For AC5X. + * + * Copyright (C) 2022 Allied Telesis Labs + */ + +#include "ac5-98dx25xx.dtsi" + +/ { + model = "Marvell AC5X SoC"; + compatible = "marvell,ac5x", "marvell,ac5"; +}; + +&cnm_clock { + clock-frequency = <325000000>; +}; diff --git a/dts/src/arm64/marvell/ac5x-rd-carrier-cn9131.dts b/dts/src/arm64/marvell/ac5x-rd-carrier-cn9131.dts new file mode 100644 index 0000000000..2a0b070000 --- /dev/null +++ b/dts/src/arm64/marvell/ac5x-rd-carrier-cn9131.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the AC5X RD Type 7 Com Express carrier board, + * Utilizing the CN913x COM Express CPU module board. + * This specific carrier board in this mode of operation (external) + * only maintains a PCIe link with the CPU module, + * which does not require any special DTS definitions. + * + * AC5X RD works here in external mode (switch selectable at the back of the + * board), and connect via an external cable a kit + * which would allow it to use an external CN9131 CPU COM Express module, + * mounted on top of an interposer kit. + * + * So in this case, once the switch is set to external mode as explained above, + * the AC5X RD becomes part of the carrier solution. + * + * When the board boots in the external CPU mode, the internal CPU is disabled, + * and only the switch portion of the SOC acts as a PCIe end-point, Hence there + * is no need to describe this internal (disabled CPU) in the device tree. + * + * There is no CPU booting in this mode on the carrier, only on the + * CN9131 COM Express CPU module. + * What runs the Linux is the CN9131 on the COM Express CPU module, + * And it accesses the switch end-point on the AC5X RD portion of the carrier + * via PCIe. + */ + +#include "cn9131-db-comexpress.dtsi" +#include "ac5x-rd-carrier.dtsi" + +/ { + model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module"; + compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier", + "marvell,cn9131-cpu-module", "marvell,cn9131", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x2 0x00000000>; + }; + +}; diff --git a/dts/src/arm64/marvell/ac5x-rd-carrier.dtsi b/dts/src/arm64/marvell/ac5x-rd-carrier.dtsi new file mode 100644 index 0000000000..f98629abb5 --- /dev/null +++ b/dts/src/arm64/marvell/ac5x-rd-carrier.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the AC5X RD Type 7 Com Express carrier board, + * This specific board in external mode (see below) only maintains + * a PCIe link with the COM Express CPU module, which does not + * require any special DTS definitions. + * + * AC5X RD can either work as you would expect, as a complete standalone + * box using the internal CPU, or you can move the switch on the back of + * the box to "external" mode, and connect via an external cable a kit + * which would allow it to use an external CPU COM Express module, + * mounted on top of an interposer kit. + * + * So in this case, once the switch is set to external mode as explained above, + * the AC5X RD becomes part of the carrier solution. + * This is a development/reference solution, not a full commercial solution, + * hence it was designed with the flexibility to be configured in different + * modes of operation. + * + * When the board boots in the external CPU mode, the internal CPU is disabled, + * and only the switch portion of the SOC acts as a PCIe end-point, Hence there + * is no need to describe this internal (disabled CPU) in the device tree. + * + * There is no CPU booting in this mode on the carrier, + * only on the COM Express CPU module. + */ + +/ { + model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board"; + compatible = "marvell,rd-ac5x-carrier"; + +}; diff --git a/dts/src/arm64/marvell/armada-3720-db.dts b/dts/src/arm64/marvell/armada-3720-db.dts index f2cc00594d..0cfb384920 100644 --- a/dts/src/arm64/marvell/armada-3720-db.dts +++ b/dts/src/arm64/marvell/armada-3720-db.dts @@ -18,7 +18,7 @@ / { model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3"; - compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700"; chosen { stdout-path = "serial0:115200n8"; @@ -128,6 +128,9 @@ /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */ &pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -161,7 +164,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>; diff --git a/dts/src/arm64/marvell/armada-3720-eDPU.dts b/dts/src/arm64/marvell/armada-3720-eDPU.dts new file mode 100644 index 0000000000..d6d37a1f6f --- /dev/null +++ b/dts/src/arm64/marvell/armada-3720-eDPU.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "armada-3720-uDPU.dtsi" + +/ { + model = "Methode eDPU Board"; + compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710"; +}; + +ð0 { + phy-mode = "2500base-x"; +}; + +/* + * External MV88E6361 switch is only available on v2 of the board. + * U-Boot will enable the MDIO bus and switch nodes. + */ +&mdio { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&smi_pins>; + + /* Actual device is MV88E6361 */ + switch: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + ethernet = <ð0>; + }; + + port@9 { + reg = <9>; + label = "downlink"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + + port@a { + reg = <10>; + label = "uplink"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; + }; + }; + }; +}; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin-emmc.dts b/dts/src/arm64/marvell/armada-3720-espressobin-emmc.dts index ec72a11ed8..6715a19c14 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin-emmc.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin-emmc.dts @@ -18,27 +18,9 @@ / { model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; + "marvell,armada3720", "marvell,armada3700"; }; -/* U11 */ &sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; }; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin-ultra.dts b/dts/src/arm64/marvell/armada-3720-espressobin-ultra.dts new file mode 100644 index 0000000000..870bb380a4 --- /dev/null +++ b/dts/src/arm64/marvell/armada-3720-espressobin-ultra.dts @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for ESPRESSObin-Ultra board. + * Copyright (C) 2019 Globalscale technologies, Inc. + * + * Jason Hung <jhung@globalscaletechnologies.com> + */ + +/dts-v1/; + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Ultra Board"; + compatible = "globalscale,espressobin-ultra", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3700"; + + aliases { + /* ethernet1 is WAN port */ + ethernet1 = &switch0port5; + ethernet2 = &switch0port1; + ethernet3 = &switch0port2; + ethernet4 = &switch0port3; + ethernet5 = &switch0port4; + }; + + /delete-node/ regulator; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + + gpio-leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + /* No assigned functions to the LEDs by default */ + led1 { + label = "ebin-ultra:blue:led1"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + led2 { + label = "ebin-ultra:green:led2"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + led3 { + label = "ebin-ultra:red:led3"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + led4 { + label = "ebin-ultra:yellow:led4"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&sdhci1 { + /delete-property/ vqmmc-supply; + status = "disabled"; +}; + +&spi0 { + flash@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3e0000>; + }; + partition@3e0000 { + label = "hw-info"; + reg = <0x3e0000 0x10000>; + read-only; + }; + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&usb3 { + usb-phy = <&usb3_phy>; +}; + +&mdio { + extphy: ethernet-phy@1 { + reg = <1>; + + reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; + }; +}; + +&switch0 { + reg = <3>; + + reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; + + ethernet-ports { + switch0port1: ethernet-port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&switch0phy0>; + }; + + switch0port2: ethernet-port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + switch0port3: ethernet-port@3 { + reg = <3>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + switch0port4: ethernet-port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + switch0port5: ethernet-port@5 { + reg = <5>; + label = "wan"; + phy-handle = <&extphy>; + phy-mode = "sgmii"; + }; + }; + + mdio { + switch0phy3: ethernet-phy@14 { + reg = <0x14>; + }; + }; +}; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin-v7-emmc.dts b/dts/src/arm64/marvell/armada-3720-espressobin-v7-emmc.dts index 03733fd927..2a8aa3901a 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin-v7-emmc.dts @@ -8,7 +8,7 @@ * */ /* - * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf */ /dts-v1/; @@ -19,43 +19,27 @@ model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", - "marvell,armada3710"; -}; + "marvell,armada3700"; -&switch0 { - ports { - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; - - port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; }; }; -/* U11 */ +&switch0port1 { + label = "lan1"; +}; + +&switch0port3 { + label = "wan"; +}; + &sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; status = "okay"; +}; - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; +&led2 { + status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin-v7.dts b/dts/src/arm64/marvell/armada-3720-espressobin-v7.dts index 8570c5f47d..b03af87611 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin-v7.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin-v7.dts @@ -8,7 +8,7 @@ * */ /* - * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf */ /dts-v1/; @@ -18,21 +18,23 @@ / { model = "Globalscale Marvell ESPRESSOBin Board V7"; compatible = "globalscale,espressobin-v7", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; + "marvell,armada3720", "marvell,armada3700"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; +}; + +&switch0port1 { + label = "lan1"; }; -&switch0 { - ports { - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; +&switch0port3 { + label = "wan"; +}; - port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; - }; +&led2 { + status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin.dts b/dts/src/arm64/marvell/armada-3720-espressobin.dts index 1542d836c0..c5a834b33b 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin.dts @@ -16,5 +16,5 @@ / { model = "Globalscale Marvell ESPRESSOBin Board"; - compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3700"; }; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin.dtsi b/dts/src/arm64/marvell/armada-3720-espressobin.dtsi index 42e992f9c8..fed2dcecb3 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin.dtsi +++ b/dts/src/arm64/marvell/armada-3720-espressobin.dtsi @@ -13,8 +13,10 @@ / { aliases { ethernet0 = ð0; - serial0 = &uart0; - serial1 = &uart1; + /* for DSA user port device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; }; chosen { @@ -39,21 +41,56 @@ 3300000 0x0>; enable-active-high; }; + + led2: gpio-led2 { + /* led2 is working only on v7 board */ + status = "disabled"; + + compatible = "gpio-leds"; + + led2 { + label = "led2"; + gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; /* J9 */ &pcie0 { status = "okay"; - phys = <&comphy1 0>; pinctrl-names = "default"; pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; }; /* J6 */ &sata { status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; +}; + +/* U11 */ +&sdhci0 { + /* Main DTS file for Espressobin is without eMMC */ + status = "disabled"; + + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; }; /* J1 */ @@ -108,19 +145,17 @@ }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + switch0port0: ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -131,19 +166,19 @@ }; }; - port@1 { + switch0port1: ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -155,13 +190,13 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/dts/src/arm64/marvell/armada-3720-gl-mv1000.dts b/dts/src/arm64/marvell/armada-3720-gl-mv1000.dts new file mode 100644 index 0000000000..63fbc83521 --- /dev/null +++ b/dts/src/arm64/marvell/armada-3720-gl-mv1000.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-372x.dtsi" + +/ { + model = "GL.iNet GL-MV1000"; + compatible = "glinet,gl-mv1000", "marvell,armada3720"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + switch { + label = "switch"; + linux,code = <BTN_0>; + gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + vpn { + label = "green:vpn"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0xf0000 0x8000>; + }; + + factory: partition@f8000 { + label = "factory"; + reg = <0xf8000 0x8000>; + read-only; + }; + + partition@100000 { + label = "dtb"; + reg = <0x100000 0x10000>; + read-only; + }; + + partition@110000 { + label = "rescue"; + reg = <0x110000 0x1000000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + switch0: ethernet-switch@1 { + compatible = "marvell,mv88e6085"; + reg = <1>; + + dsa,member = <0 0>; + + ports: ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + ethernet-port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: ethernet-phy@11 { + reg = <0x11>; + }; + switch0phy1: ethernet-phy@12 { + reg = <0x12>; + }; + switch0phy2: ethernet-phy@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + nvmem-cells = <&macaddr_factory_0>; + nvmem-cell-names = "mac-address"; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_factory_6: macaddr@6 { + reg = <0x6 0x6>; + }; +}; diff --git a/dts/src/arm64/marvell/armada-3720-turris-mox.dts b/dts/src/arm64/marvell/armada-3720-turris-mox.dts index bb42d1e6a4..f1a9f22343 100644 --- a/dts/src/arm64/marvell/armada-3720-turris-mox.dts +++ b/dts/src/arm64/marvell/armada-3720-turris-mox.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for CZ.NIC Turris Mox Board - * 2019 by Marek Behun <marek.behun@nic.cz> + * 2019 by Marek Behún <kabel@kernel.org> */ /dts-v1/; @@ -14,11 +14,14 @@ / { model = "CZ.NIC Turris Mox Board"; compatible = "cznic,turris-mox", "marvell,armada3720", - "marvell,armada3710"; + "marvell,armada3700"; aliases { spi0 = &spi0; + ethernet0 = ð0; ethernet1 = ð1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; }; chosen { @@ -32,7 +35,7 @@ leds { compatible = "gpio-leds"; - red { + led { label = "mox:red:activity"; gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; @@ -42,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; @@ -95,23 +98,22 @@ }; sfp: sfp { - compatible = "sff,sfp+"; + compatible = "sff,sfp"; i2c-bus = <&i2c0>; - los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; - rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; /* enabled by U-Boot if SFP module is present */ status = "disabled"; }; firmware { - turris-mox-rwtm { - compatible = "cznic,turris-mox-rwtm"; - mboxes = <&rwtm 0>; - status = "okay"; + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm"; }; }; }; @@ -120,25 +122,46 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <100000>; + /delete-property/ mrvl,i2c-fast-mode; status = "okay"; + /* MCP7940MT-I/MNY RTC */ rtc@6f { compatible = "microchip,mcp7940x"; reg = <0x6f>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */ }; }; -&pcie_reset_pins { - function = "gpio"; -}; - &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; status = "okay"; - max-link-speed = <2>; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; - phys = <&comphy1 0>; + slot-power-limit-milliwatt = <10000>; + /* + * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property + * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and + * 2 size cells and also expects that the second range starts at 16 MB offset. Also it + * expects that first range uses same address for PCI (child) and CPU (parent) cells (so + * no remapping) and that this address is the lowest from all specified ranges. If these + * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address + * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window + * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB. + * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in + * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): + * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 + * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf + * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 + * Bug related to requirement of same child and parent addresses for first range is fixed + * in U-Boot version 2022.04 by following commit: + * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17 + */ + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ + 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */ /* enabled by U-Boot if PCIe module is present */ status = "disabled"; @@ -152,7 +175,7 @@ pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; @@ -179,6 +202,8 @@ marvell,pad-type = "sd"; vqmmc-supply = <&vsdio_reg>; mmc-pwrseq = <&sdhci1_pwrseq>; + /* forbid SDR104 for FCC purposes */ + sdhci-caps-mask = <0x2 0x0>; status = "okay"; }; @@ -190,7 +215,7 @@ assigned-clock-parents = <&tbg 1>; assigned-clock-rates = <20000000>; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -208,7 +233,7 @@ }; partition@20000 { - label = "u-boot"; + label = "a53-firmware"; reg = <0x20000 0x160000>; }; @@ -279,10 +304,16 @@ reg = <1>; }; - /* switch nodes are enabled by U-Boot if modules are present */ + /* + * NOTE: switch nodes are enabled by U-Boot if modules are present + * DO NOT change this node name (switch0@10) even if it is not following + * conventions! Deployed U-Boot binaries are explicitly looking for + * this node in order to augment the device tree! + * Also do not touch the "ports" or "port@n" nodes. These are also ABI. + */ switch0@10 { - compatible = "marvell,mv88e6190"; - reg = <0x10 0>; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; + reg = <0x10>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; interrupts = <MOXTET_IRQ_PERIDOT(0)>; @@ -292,35 +323,35 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -405,9 +436,10 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch0@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2 0>; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; + reg = <0x2>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; interrupts = <MOXTET_IRQ_TOPAZ>; @@ -417,19 +449,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1_topaz: switch0phy1@11 { + switch0phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch0phy2_topaz: switch0phy2@12 { + switch0phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch0phy3_topaz: switch0phy3@13 { + switch0phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch0phy4_topaz: switch0phy4@14 { + switch0phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -472,9 +504,10 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@11 { - compatible = "marvell,mv88e6190"; - reg = <0x11 0>; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; + reg = <0x11>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; interrupts = <MOXTET_IRQ_PERIDOT(1)>; @@ -484,35 +517,35 @@ #address-cells = <1>; #size-cells = <0>; - switch1phy1: switch1phy1@1 { + switch1phy1: ethernet-phy@1 { reg = <0x1>; }; - switch1phy2: switch1phy2@2 { + switch1phy2: ethernet-phy@2 { reg = <0x2>; }; - switch1phy3: switch1phy3@3 { + switch1phy3: ethernet-phy@3 { reg = <0x3>; }; - switch1phy4: switch1phy4@4 { + switch1phy4: ethernet-phy@4 { reg = <0x4>; }; - switch1phy5: switch1phy5@5 { + switch1phy5: ethernet-phy@5 { reg = <0x5>; }; - switch1phy6: switch1phy6@6 { + switch1phy6: ethernet-phy@6 { reg = <0x6>; }; - switch1phy7: switch1phy7@7 { + switch1phy7: ethernet-phy@7 { reg = <0x7>; }; - switch1phy8: switch1phy8@8 { + switch1phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -597,9 +630,10 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2 0>; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; + reg = <0x2>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; interrupts = <MOXTET_IRQ_TOPAZ>; @@ -609,19 +643,19 @@ #address-cells = <1>; #size-cells = <0>; - switch1phy1_topaz: switch1phy1@11 { + switch1phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch1phy2_topaz: switch1phy2@12 { + switch1phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch1phy3_topaz: switch1phy3@13 { + switch1phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch1phy4_topaz: switch1phy4@14 { + switch1phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -664,9 +698,10 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@12 { - compatible = "marvell,mv88e6190"; - reg = <0x12 0>; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; + reg = <0x12>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; interrupts = <MOXTET_IRQ_PERIDOT(2)>; @@ -676,35 +711,35 @@ #address-cells = <1>; #size-cells = <0>; - switch2phy1: switch2phy1@1 { + switch2phy1: ethernet-phy@1 { reg = <0x1>; }; - switch2phy2: switch2phy2@2 { + switch2phy2: ethernet-phy@2 { reg = <0x2>; }; - switch2phy3: switch2phy3@3 { + switch2phy3: ethernet-phy@3 { reg = <0x3>; }; - switch2phy4: switch2phy4@4 { + switch2phy4: ethernet-phy@4 { reg = <0x4>; }; - switch2phy5: switch2phy5@5 { + switch2phy5: ethernet-phy@5 { reg = <0x5>; }; - switch2phy6: switch2phy6@6 { + switch2phy6: ethernet-phy@6 { reg = <0x6>; }; - switch2phy7: switch2phy7@7 { + switch2phy7: ethernet-phy@7 { reg = <0x7>; }; - switch2phy8: switch2phy8@8 { + switch2phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -780,9 +815,10 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2 0>; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; + reg = <0x2>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; interrupts = <MOXTET_IRQ_TOPAZ>; @@ -792,19 +828,19 @@ #address-cells = <1>; #size-cells = <0>; - switch2phy1_topaz: switch2phy1@11 { + switch2phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch2phy2_topaz: switch2phy2@12 { + switch2phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch2phy3_topaz: switch2phy3@13 { + switch2phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch2phy4_topaz: switch2phy4@14 { + switch2phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/dts/src/arm64/marvell/armada-3720-uDPU.dts b/dts/src/arm64/marvell/armada-3720-uDPU.dts index 7eb6c1796c..c76eceabd3 100644 --- a/dts/src/arm64/marvell/armada-3720-uDPU.dts +++ b/dts/src/arm64/marvell/armada-3720-uDPU.dts @@ -1,170 +1,42 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device tree for the uDPU board. - * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) - * Copyright (C) 2016 Marvell - * Copyright (C) 2019 Methode Electronics - * Copyright (C) 2019 Telus - * - * Vladimir Vid <vladimir.vid@sartura.hr> - */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" +#include "armada-3720-uDPU.dtsi" / { model = "Methode uDPU Board"; - compatible = "methode,udpu", "marvell,armada3720"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - - power1 { - label = "udpu:green:power"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - power2 { - label = "udpu:red:power"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - network1 { - label = "udpu:green:network"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - - network2 { - label = "udpu:red:network"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - alarm1 { - label = "udpu:green:alarm"; - gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; - }; - - alarm2 { - label = "udpu:red:alarm"; - gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; - }; - }; + compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; i2c-bus = <&i2c0>; - los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; - - sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + los-gpios = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; }; -&sdhci0 { - status = "okay"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; - non-removable; - no-sd; - no-sdio; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - /* only bootloader is located on the SPI */ - partition@0 { - label = "uboot"; - reg = <0 0x400000>; - }; - }; +&pinctrl_nb { + i2c1_recovery_pins: i2c1-recovery-pins { + groups = "i2c1"; + function = "gpio"; }; }; &i2c0 { status = "okay"; - pinctrl-names = "default"; + pinctrl-names = "default", "recovery"; pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_recovery_pins>; /delete-property/mrvl,i2c-fast-mode; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - /delete-property/mrvl,i2c-fast-mode; - - lm75@48 { - status = "okay"; - compatible = "lm75"; - reg = <0x48>; - }; - - lm75@49 { - status = "okay"; - compatible = "lm75"; - reg = <0x49>; - }; + scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; ð0 { phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; sfp = <&sfp_eth0>; }; - -ð1 { - phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; - sfp = <&sfp_eth1>; -}; - -&usb3 { - status = "okay"; - phys = <&usb2_utmi_otg_phy>; - phy-names = "usb2-utmi-otg-phy"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/dts/src/arm64/marvell/armada-3720-uDPU.dtsi b/dts/src/arm64/marvell/armada-3720-uDPU.dtsi new file mode 100644 index 0000000000..3a9b690718 --- /dev/null +++ b/dts/src/arm64/marvell/armada-3720-uDPU.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid <vladimir.vid@sartura.hr> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + led-power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led-network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + led-network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + led-alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + led-alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + +&pinctrl_nb { + i2c2_recovery_pins: i2c2-recovery-pins { + groups = "i2c2"; + function = "gpio"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + temp-sensor@48 { + compatible = "ti,tmp75c"; + reg = <0x48>; + }; + + temp-sensor@49 { + compatible = "ti,tmp75c"; + reg = <0x49>; + }; +}; + +ð0 { + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/armada-372x.dtsi b/dts/src/arm64/marvell/armada-372x.dtsi index 5ce55bdbb9..02ae1e1532 100644 --- a/dts/src/arm64/marvell/armada-372x.dtsi +++ b/dts/src/arm64/marvell/armada-372x.dtsi @@ -13,7 +13,7 @@ / { model = "Marvell Armada 3720 SoC"; - compatible = "marvell,armada3720", "marvell,armada3710"; + compatible = "marvell,armada3720", "marvell,armada3700"; cpus { cpu1: cpu@1 { diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi index 000c135e39..e300145ad1 100644 --- a/dts/src/arm64/marvell/armada-37xx.dtsi +++ b/dts/src/arm64/marvell/armada-37xx.dtsi @@ -35,6 +35,11 @@ reg = <0 0x4000000 0 0x200000>; no-map; }; + + tee@4400000 { + reg = <0 0x4400000 0 0x1000000>; + no-map; + }; }; cpus { @@ -132,10 +137,20 @@ reg = <0x11500 0x40>; }; + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", + "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x200>; - clocks = <&xtalclk>; + reg = <0x12000 0x18>; + clocks = <&uartclk 0>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, @@ -147,7 +162,7 @@ uart1: serial@12200 { compatible = "marvell,armada-3700-uart-ext"; reg = <0x12200 0x30>; - clocks = <&xtalclk>; + clocks = <&uartclk 1>; interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; @@ -156,7 +171,8 @@ }; nb_periph_clk: nb-periph-clk@13000 { - compatible = "marvell,armada-3700-periph-clock-nb"; + compatible = "marvell,armada-3700-periph-clock-nb", + "syscon"; reg = <0x13000 0x100>; clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>; @@ -264,6 +280,8 @@ "lane2_sata_usb3"; #address-cells = <1>; #size-cells = <0>; + clocks = <&xtalclk>; + clock-names = "xtal"; comphy0: phy@0 { reg = <0>; @@ -316,8 +334,8 @@ }; pcie_reset_pins: pcie-reset-pins { - groups = "pcie1"; - function = "pcie"; + groups = "pcie1"; /* this actually controls "pcie1_reset" */ + function = "gpio"; }; pcie_clkreq_pins: pcie-clkreq-pins { @@ -431,7 +449,7 @@ #mbox-cells = <1>; }; - sdhci1: sdhci@d0000 { + sdhci1: mmc@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd0000 0x300>, @@ -442,7 +460,7 @@ status = "disabled"; }; - sdhci0: sdhci@d8000 { + sdhci0: mmc@d8000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd8000 0x300>, @@ -458,6 +476,8 @@ reg = <0xe0000 0x178>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&nb_periph_clk 1>; + phys = <&comphy2 0>; + phy-names = "sata-phy"; status = "disabled"; }; @@ -484,19 +504,37 @@ bus-range = <0x00 0xff>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; + clocks = <&sb_periph_clk 13>; msi-parent = <&pcie0>; msi-controller; - ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ - 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ + /* + * The 128 MiB address range [0xe8000000-0xf0000000] is + * dedicated for PCIe and can be assigned to 8 windows + * with size a power of two. Use one 64 KiB window for + * IO at the end and the remaining seven windows + * (totaling 127 MiB) for MEM. + */ + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ + 0x81000000 0 0x00000000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; + max-link-speed = <2>; + phys = <&comphy1 0>; pcie_intc: interrupt-controller { interrupt-controller; #interrupt-cells = <1>; }; }; }; + + firmware { + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; }; diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts index a7eb4e7697..5e5baf6bee 100644 --- a/dts/src/arm64/marvell/armada-7040-db.dts +++ b/dts/src/arm64/marvell/armada-7040-db.dts @@ -83,7 +83,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -186,7 +186,7 @@ &cp0_spi1 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; @@ -218,6 +218,10 @@ }; }; +&cp0_utmi { + status = "okay"; +}; + &cp0_comphy1 { cp0_usbh0_con: connector { compatible = "usb-a-connector"; @@ -226,8 +230,9 @@ }; &cp0_usb3_0 { - phys = <&cp0_comphy1 0>; - phy-names = "cp0-usb3h0-comphy"; + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "cp0-usb3h0-comphy", "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -239,8 +244,9 @@ }; &cp0_usb3_1 { - phys = <&cp0_comphy4 1>; - phy-names = "cp0-usb3h1-comphy"; + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "cp0-usb3h1-comphy", "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -276,7 +282,7 @@ &cp0_eth0 { status = "okay"; /* Network PHY */ - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; diff --git a/dts/src/arm64/marvell/armada-7040-mochabin.dts b/dts/src/arm64/marvell/armada-7040-mochabin.dts new file mode 100644 index 0000000000..40b7ee7ead --- /dev/null +++ b/dts/src/arm64/marvell/armada-7040-mochabin.dts @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree file for Globalscale MOCHAbin + * Copyright (C) 2019 Globalscale technologies, Inc. + * Copyright (C) 2021 Sartura Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-7040.dtsi" + +/ { + model = "Globalscale MOCHAbin"; + compatible = "globalscale,mochabin", "marvell,armada7040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + ethernet3 = &swport1; + ethernet4 = &swport2; + ethernet5 = &swport3; + ethernet6 = &swport4; + }; + + /* SFP+ 10G */ + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; + }; + + /* SFP 1G */ + sfp_eth2: sfp-eth2 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c0>; + los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* microUSB UART console */ +&uart0 { + status = "okay"; + + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +/* eMMC */ +&ap_sdhci0 { + status = "okay"; + + bus-width = <4>; + non-removable; + /delete-property/ marvell,xenon-phy-slow-mode; + no-1-8-v; +}; + +&cp0_pinctrl { + cp0_uart0_pins: cp0-uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; + + cp0_spi0_pins: cp0-spi0-pins { + marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; + marvell,function = "spi0"; + }; + + cp0_spi1_pins: cp0-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp0_i2c0_pins: cp0-i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c1"; + }; + + pca9554_int_pins: pca9554-int-pins { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + cp0_rgmii1_pins: cp0-rgmii1-pins { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + + is31_sdb_pins: is31-sdb-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + + cp0_pcie_reset_pins: cp0-pcie-reset-pins { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + cp0_pcie_clkreq_pins: cp0-pcie-clkreq-pins { + marvell,pins = "mpp5"; + marvell,function = "pcie1"; + }; + + cp0_switch_pins: cp0-switch-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + cp0_phy_pins: cp0-phy-pins { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; +}; + +/* mikroBUS UART */ +&cp0_uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart0_pins>; +}; + +/* mikroBUS SPI */ +&cp0_spi0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; +}; + +/* SPI-NOR */ +&cp0_spi1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3e0000>; + read-only; + }; + + partition@3e0000 { + label = "hw-info"; + reg = <0x3e0000 0x10000>; + read-only; + }; + + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +/* mikroBUS, 1G SFP and GPIO expander */ +&cp0_i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + sfp_gpio: pca9554@39 { + compatible = "nxp,pca9554"; + pinctrl-names = "default"; + pinctrl-0 = <&pca9554_int_pins>; + reg = <0x39>; + + interrupt-parent = <&cp0_gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-controller; + #gpio-cells = <2>; + + /* + * IO0_0: SFP+_TX_FAULT + * IO0_1: SFP+_TX_DISABLE + * IO0_2: SFP+_PRSNT + * IO0_3: SFP+_LOSS + * IO0_4: SFP_TX_FAULT + * IO0_5: SFP_TX_DISABLE + * IO0_6: SFP_PRSNT + * IO0_7: SFP_LOSS + */ + }; +}; + +/* IS31FL3199, mini-PCIe and 10G SFP+ */ +&cp0_i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + clock-frequency = <100000>; + + leds@64 { + compatible = "issi,is31fl3199"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&is31_sdb_pins>; + shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>; + reg = <0x64>; + + led1_red: led@1 { + label = "red:led1"; + reg = <1>; + led-max-microamp = <20000>; + }; + + led1_green: led@2 { + label = "green:led1"; + reg = <2>; + }; + + led1_blue: led@3 { + label = "blue:led1"; + reg = <3>; + }; + + led2_red: led@4 { + label = "red:led2"; + reg = <4>; + }; + + led2_green: led@5 { + label = "green:led2"; + reg = <5>; + }; + + led2_blue: led@6 { + label = "blue:led2"; + reg = <6>; + }; + + led3_red: led@7 { + label = "red:led3"; + reg = <7>; + }; + + led3_green: led@8 { + label = "green:led3"; + reg = <8>; + }; + + led3_blue: led@9 { + label = "blue:led3"; + reg = <9>; + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + /* 88E1512 PHY */ + eth2phy: ethernet-phy@1 { + reg = <1>; + sfp = <&sfp_eth2>; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_phy_pins>; + reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>; + }; + + /* 88E6141 Topaz switch */ + switch: ethernet-switch@3 { + compatible = "marvell,mv88e6085"; + reg = <3>; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_switch_pins>; + reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&cp0_gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + swport1: ethernet-port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&swphy1>; + }; + + swport2: ethernet-port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&swphy2>; + }; + + swport3: ethernet-port@3 { + reg = <3>; + label = "lan2"; + phy-handle = <&swphy3>; + }; + + swport4: ethernet-port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&swphy4>; + }; + + ethernet-port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp0_eth1>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + swphy1: ethernet-phy@17 { + reg = <17>; + }; + + swphy2: ethernet-phy@18 { + reg = <18>; + }; + + swphy3: ethernet-phy@19 { + reg = <19>; + }; + + swphy4: ethernet-phy@20 { + reg = <20>; + }; + }; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* 10G SFP+ */ +&cp0_eth0 { + status = "okay"; + + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +/* Topaz switch uplink */ +&cp0_eth1 { + status = "okay"; + + phy-mode = "2500base-x"; + phys = <&cp0_comphy0 1>; + + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +/* 1G SFP or 1G RJ45 */ +&cp0_eth2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_rgmii1_pins>; + + phy = <ð2phy>; + phy-mode = "rgmii-id"; +}; + +&cp0_utmi { + status = "okay"; +}; + +/* SMSC USB5434B hub */ +&cp0_usb3_0 { + status = "okay"; + + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "cp0-usb3h0-comphy", "utmi"; +}; + +/* miniPCI-E USB */ +&cp0_usb3_1 { + status = "okay"; +}; + +&cp0_sata0 { + status = "okay"; + + /* 7 + 12 SATA connector (J24) */ + sata-port@0 { + phys = <&cp0_comphy2 0>; + phy-names = "cp0-sata0-0-phy"; + }; + + /* M.2-2250 B-key (J39) */ + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +/* miniPCI-E (J5) */ +&cp0_pcie2 { + status = "okay"; + + pinctrl-names = "default", "clkreq"; + pinctrl-0 = <&cp0_pcie_reset_pins>; + pinctrl-1 = <&cp0_pcie_clkreq_pins>; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; + reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; +}; diff --git a/dts/src/arm64/marvell/armada-7040.dtsi b/dts/src/arm64/marvell/armada-7040.dtsi index 4724721577..2f440711d2 100644 --- a/dts/src/arm64/marvell/armada-7040.dtsi +++ b/dts/src/arm64/marvell/armada-7040.dtsi @@ -14,3 +14,27 @@ compatible = "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; }; + +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts index b90d78a572..67892f0d28 100644 --- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -20,7 +20,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; @@ -31,6 +31,16 @@ ethernet2 = &cp1_eth2; }; + fan: pwm { + compatible = "pwm-fan"; + /* 20% steps */ + cooling-levels = <0 51 102 153 204 255>; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_fan_pwm_pins>; + pwms = <&cp0_gpio2 16 40000>; + }; + v_3_3: regulator-3-3v { compatible = "regulator-fixed"; regulator-name = "v_3_3"; @@ -54,8 +64,8 @@ sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; - mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; maximum-power-milliwatt = <2000>; @@ -84,7 +94,7 @@ pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear button */ label = "Rear Button"; gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; @@ -92,7 +102,7 @@ linux,code = <BTN_0>; }; - button_1 { + button-1 { /* The wps button */ label = "WPS Button"; gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; @@ -102,6 +112,123 @@ }; }; +&ap_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + ap_active: trip-active { + temperature = <40000>; /* millicelsius */ + hysteresis = <4000>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&ap_active>; + cooling-device = <&fan THERMAL_NO_LIMIT 4>; + }; + map1 { + trip = <&ap_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +&cp0_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + cp0_active0: trip-active0 { + temperature = <40000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active1: trip-active1 { + temperature = <45000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active2: trip-active2 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active3: trip-active3 { + temperature = <60000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&cp0_active0>; + cooling-device = <&fan 0 1>; + }; + map1 { + trip = <&cp0_active1>; + cooling-device = <&fan 1 2>; + }; + map2 { + trip = <&cp0_active2>; + cooling-device = <&fan 2 3>; + }; + map3 { + trip = <&cp0_active3>; + cooling-device = <&fan 3 4>; + }; + map4 { + trip = <&cp0_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +&cp1_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + cp1_active0: trip-active0 { + temperature = <40000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active1: trip-active1 { + temperature = <45000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active2: trip-active2 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active3: trip-active3 { + temperature = <60000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&cp1_active0>; + cooling-device = <&fan 0 1>; + }; + map1 { + trip = <&cp1_active1>; + cooling-device = <&fan 1 2>; + }; + map2 { + trip = <&cp1_active2>; + cooling-device = <&fan 2 3>; + }; + map3 { + trip = <&cp1_active3>; + cooling-device = <&fan 3 4>; + }; + map4 { + trip = <&cp1_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + &uart0 { status = "okay"; pinctrl-0 = <&uart0_pins>; @@ -276,7 +403,7 @@ /* SFP */ &cp0_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; managed = "in-band-status"; phys = <&cp0_comphy2 0>; sfp = <&sfp_cp0_eth0>; @@ -370,42 +497,42 @@ reset-deassert-us = <10000>; }; - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cp1_switch_reset_pins>; reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; @@ -418,19 +545,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; @@ -454,10 +581,7 @@ status = "okay"; phy-mode = "2500base-x"; phys = <&cp1_comphy5 2>; - fixed-link { - speed = <2500>; - full-duplex; - }; + managed = "in-band-status"; }; &cp1_spi1 { @@ -465,7 +589,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/dts/src/arm64/marvell/armada-8040-db.dts b/dts/src/arm64/marvell/armada-8040-db.dts index 09fb5256f1..92897bd7e6 100644 --- a/dts/src/arm64/marvell/armada-8040-db.dts +++ b/dts/src/arm64/marvell/armada-8040-db.dts @@ -72,7 +72,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -154,8 +154,15 @@ }; /* CON9 on CP0 expansion */ +&cp0_utmi { + status = "okay"; +}; + &cp0_usb3_0 { usb-phy = <&cp0_usb3_0_phy>; + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -168,8 +175,9 @@ /* CON10 on CP0 expansion */ &cp0_usb3_1 { - phys = <&cp0_comphy4 1>; - phy-names = "cp0-usb3h1-comphy"; + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -187,7 +195,7 @@ &cp0_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; fixed-link { speed = <10000>; @@ -230,7 +238,7 @@ &cp1_spi1 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; @@ -306,14 +314,23 @@ }; }; +&cp1_utmi { + status = "okay"; +}; + /* CON9 on CP1 expansion */ &cp1_usb3_0 { usb-phy = <&cp1_usb3_0_phy>; + phys = <&cp1_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; /* CON10 on CP1 expansion */ &cp1_usb3_1 { + phys = <&cp1_utmi1>; + phy-names = "utmi"; status = "okay"; }; @@ -331,7 +348,7 @@ &cp1_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; fixed-link { speed = <10000>; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts b/dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts index c3e18fd5bc..411d200642 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts +++ b/dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts @@ -5,6 +5,8 @@ * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ +#include <dt-bindings/leds/common.h> + #include "armada-8040-mcbin.dtsi" / { @@ -12,18 +14,38 @@ compatible = "marvell,armada8040-mcbin-singleshot", "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led18_pins>; + pinctrl-names = "default"; + + led18 { + gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "heartbeat"; + }; + }; }; &cp0_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; managed = "in-band-status"; sfp = <&sfp_eth0>; }; &cp1_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; managed = "in-band-status"; sfp = <&sfp_eth1>; }; + +&cp0_pinctrl { + cp0_led18_pins: led18-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; +}; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dts b/dts/src/arm64/marvell/armada-8040-mcbin.dts index d06f5ab7dd..1766cf5810 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dts +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dts @@ -34,12 +34,12 @@ status = "okay"; /* Network PHY */ phy = <&phy0>; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; }; &cp1_eth0 { status = "okay"; /* Network PHY */ phy = <&phy8>; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; }; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index cbcb210cb6..c864df9ec8 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -65,10 +65,10 @@ /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; i2c-bus = <&sfpp0_i2c>; - los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp0_pins>; maximum-power-milliwatt = <2000>; @@ -78,10 +78,10 @@ /* CON17,18 - CPS lane 4 */ compatible = "sff,sfp"; i2c-bus = <&sfpp1_i2c>; - los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; maximum-power-milliwatt = <2000>; @@ -91,10 +91,10 @@ /* CON13,14 - CPS lane 5 */ compatible = "sff,sfp"; i2c-bus = <&sfp_1g_i2c>; - los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; maximum-power-milliwatt = <2000>; @@ -135,7 +135,7 @@ pinctrl-0 = <&cp0_i2c1_pins>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -259,13 +259,23 @@ vqmmc-supply = <&v_3_3>; }; +&cp0_utmi { + status = "okay"; +}; + &cp0_usb3_0 { /* J38? - USB2.0 only */ + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; &cp0_usb3_1 { /* J38? - USB2.0 only */ + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -350,7 +360,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; @@ -364,9 +374,14 @@ }; }; +&cp1_utmi { + status = "okay"; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - phys = <&cp1_comphy2 0>; - phy-names = "cp1-usb3h0-comphy"; + phys = <&cp1_comphy2 0>, <&cp1_utmi0>; + phy-names = "cp1-usb3h0-comphy", "utmi"; + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts b/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts new file mode 100644 index 0000000000..42a60f3dd5 --- /dev/null +++ b/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2020 Sartura Ltd. + * + * Device Tree file for IEI Puzzle-M801 + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "IEI-Puzzle-M801"; + compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp0_eth1; + ethernet3 = &cp0_eth2; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus0_i2c>; + los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + sfp_cp1_eth0: sfp-cp1-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus1_i2c>; + los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>; + pinctrl-names = "default"; + + led-0 { + /* SFP+ port 2: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* SFP+ port 1: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* SFP+ port 2: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* SFP+ port 2: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* SFP+ port 1: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* SFP+ port 1: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <5>; + gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>; + }; + + led-6 { + function = LED_FUNCTION_DISK; + linux,default-trigger = "disk-activity"; + gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + +&ap_thermal_cpu1 { + trips { + cpu_active: cpu-active { + temperature = <44000>; + hysteresis = <2000>; + type = "active"; + }; + }; + cooling-maps { + fan-map { + trip = <&cpu_active>; + cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>, + <&chassis_fan_group1 64 THERMAL_NO_LIMIT>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8010"; + reg = <0x32>; + }; +}; + +&spi0 { + status = "okay"; + flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x001f0000>; + }; + partition@u-boot-env { + label = "u-boot-env"; + reg = <0x001f0000 0x00010000>; + }; + partition@ubi1 { + label = "ubi1"; + reg = <0x00200000 0x03f00000>; + }; + partition@ubi2 { + label = "ubi2"; + reg = <0x04100000 0x03f00000>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&uart1 { + status = "okay"; + /* IEI WT61P803 PUZZLE MCU Controller */ + mcu { + compatible = "iei,wt61p803-puzzle"; + current-speed = <115200>; + enable-beep; + + leds { + compatible = "iei,wt61p803-puzzle-leds"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + hwmon { + compatible = "iei,wt61p803-puzzle-hwmon"; + #address-cells = <1>; + #size-cells = <0>; + + chassis_fan_group0:fan-group@0 { + #cooling-cells = <2>; + reg = <0x00>; + cooling-levels = <64 102 170 230 250>; + }; + + chassis_fan_group1:fan-group@1 { + #cooling-cells = <2>; + reg = <0x01>; + cooling-levels = <64 102 170 230 250>; + }; + }; + }; +}; + +&cp0_rtc { + status = "disabled"; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + + sfpplus_gpio: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + }; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpplus0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfpplus1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + +&cp0_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy2: ethernet-phy@0 { + reg = <0>; + }; + + ge_phy3: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pcie_pins>; + num-lanes = <1>; + num-viewport = <8>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cp0_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 00]; + sfp = <&sfp_cp0_eth0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&ge_phy2>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 01]; + phys = <&cp0_comphy3 1>; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "sgmii"; + phys = <&cp0_comphy1 2>; + local-mac-address = [ae 00 00 00 ff 02]; + phy = <&ge_phy3>; +}; + +&cp0_sata0 { + status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy2 0>; + phy-names = "cp0-sata0-0-phy"; + }; + + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_0 { + status = "okay"; +}; + +&cp0_usb3_1 { + status = "okay"; +}; + +&cp1_i2c0 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_i2c1 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_rtc { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp1_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 03]; + sfp = <&sfp_cp1_eth0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy = <&ge_phy4>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 04]; + phys = <&cp1_comphy3 1>; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 05]; + phys = <&cp1_comphy5 2>; + phy = <&ge_phy5>; +}; + +&cp1_pinctrl { + cp1_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31"; + marvell,function = "gpio"; + }; +}; + +&cp1_uart0 { + status = "disabled"; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_usb3_0 { + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; + status = "okay"; +}; + +&cp1_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy4: ethernet-phy@1 { + reg = <1>; + }; + ge_phy5: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp1_pcie0 { + num-lanes = <2>; + phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; + phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy"; + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/armada-8040.dtsi b/dts/src/arm64/marvell/armada-8040.dtsi index 7699b19224..22c2d6ebf3 100644 --- a/dts/src/arm64/marvell/armada-8040.dtsi +++ b/dts/src/arm64/marvell/armada-8040.dtsi @@ -15,6 +15,14 @@ "marvell,armada-ap806"; }; +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock * in CP master is not connected (by package) to the oscillator. So * disable it. However, the RTC clock in CP slave is connected to the @@ -23,3 +31,31 @@ &cp0_rtc { status = "disabled"; }; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; + +&cp1_sata0 { + iommus = <&smmu 0x454>; +}; + +&cp1_usb3_0 { + iommus = <&smmu 0x450>; +}; + +&cp1_usb3_1 { + iommus = <&smmu 0x451>; +}; diff --git a/dts/src/arm64/marvell/armada-ap806-dual.dtsi b/dts/src/arm64/marvell/armada-ap806-dual.dtsi index fcab5173fe..3ed6fba1f4 100644 --- a/dts/src/arm64/marvell/armada-ap806-dual.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-dual.dtsi @@ -51,6 +51,8 @@ cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; }; }; diff --git a/dts/src/arm64/marvell/armada-ap806-quad.dtsi b/dts/src/arm64/marvell/armada-ap806-quad.dtsi index 3db427122f..cf6a96ddcf 100644 --- a/dts/src/arm64/marvell/armada-ap806-quad.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-quad.dtsi @@ -81,6 +81,8 @@ cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; }; l2_1: l2-cache1 { @@ -88,6 +90,8 @@ cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; }; }; }; diff --git a/dts/src/arm64/marvell/armada-ap807-quad.dtsi b/dts/src/arm64/marvell/armada-ap807-quad.dtsi index 68782f161f..8848238f95 100644 --- a/dts/src/arm64/marvell/armada-ap807-quad.dtsi +++ b/dts/src/arm64/marvell/armada-ap807-quad.dtsi @@ -81,6 +81,8 @@ cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; }; l2_1: l2-cache1 { @@ -88,6 +90,8 @@ cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; }; }; }; diff --git a/dts/src/arm64/marvell/armada-ap807.dtsi b/dts/src/arm64/marvell/armada-ap807.dtsi index 623010f3ca..4a23f65d47 100644 --- a/dts/src/arm64/marvell/armada-ap807.dtsi +++ b/dts/src/arm64/marvell/armada-ap807.dtsi @@ -27,3 +27,9 @@ #clock-cells = <1>; }; }; + +&ap_sdhci0 { + compatible = "marvell,armada-ap807-sdhci", + "marvell,armada-ap806-sdhci"; /* Backward compatibility */ +}; + diff --git a/dts/src/arm64/marvell/armada-ap80x.dtsi b/dts/src/arm64/marvell/armada-ap80x.dtsi index e7438c21cc..7ec7c789d8 100644 --- a/dts/src/arm64/marvell/armada-ap80x.dtsi +++ b/dts/src/arm64/marvell/armada-ap80x.dtsi @@ -41,6 +41,11 @@ reg = <0x0 0x4000000 0x0 0x200000>; no-map; }; + + tee@4400000 { + reg = <0 0x4400000 0 0x1000000>; + no-map; + }; }; AP_NAME { @@ -56,6 +61,24 @@ compatible = "simple-bus"; ranges = <0x0 0x0 0xf0000000 0x1000000>; + smmu: iommu@5000000 { + compatible = "marvell,ap806-smmu-500", "arm,mmu-500"; + reg = <0x100000 0x100000>; + dma-coherent; + #iommu-cells = <1>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + gic: interrupt-controller@210000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -115,7 +138,6 @@ odmi: odmi@300000 { compatible = "marvell,odmi-controller"; - interrupt-controller; msi-controller; marvell,odmi-frames = <4>; reg = <0x300000 0x4000>, @@ -201,7 +223,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&ap_clk 3>; status = "disabled"; }; @@ -233,7 +254,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; }; - ap_sdhci0: sdhci@6e0000 { + ap_sdhci0: mmc@6e0000 { compatible = "marvell,armada-ap806-sdhci"; reg = <0x6e0000 0x300>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; @@ -264,6 +285,9 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ap_pinctrl 0 0 20>; + marvell,pwm-offset = <0x10c0>; + #pwm-cells = <2>; + clocks = <&ap_clk 3>; }; }; @@ -292,7 +316,7 @@ * first one that will have a critical trip point will be chosen. */ thermal-zones { - ap_thermal_ic: ap-thermal-ic { + ap_thermal_ic: ap-ic-thermal { polling-delay-passive = <0>; /* Interrupt driven */ polling-delay = <0>; /* Interrupt driven */ @@ -309,7 +333,7 @@ cooling-maps { }; }; - ap_thermal_cpu0: ap-thermal-cpu0 { + ap_thermal_cpu0: ap-cpu0-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -342,7 +366,7 @@ }; }; - ap_thermal_cpu1: ap-thermal-cpu1 { + ap_thermal_cpu1: ap-cpu1-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -375,7 +399,7 @@ }; }; - ap_thermal_cpu2: ap-thermal-cpu2 { + ap_thermal_cpu2: ap-cpu2-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -408,7 +432,7 @@ }; }; - ap_thermal_cpu3: ap-thermal-cpu3 { + ap_thermal_cpu3: ap-cpu3-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; diff --git a/dts/src/arm64/marvell/armada-ap810-ap0.dtsi b/dts/src/arm64/marvell/armada-ap810-ap0.dtsi index 8107d120a8..2f9ab6b4a2 100644 --- a/dts/src/arm64/marvell/armada-ap810-ap0.dtsi +++ b/dts/src/arm64/marvell/armada-ap810-ap0.dtsi @@ -54,7 +54,7 @@ <0x00d0000 0x1000>, /* GICH */ <0x00e0000 0x2000>; /* GICV */ - gic_its_ap0: interrupt-controller@3040000 { + gic_its_ap0: msi-controller@3040000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; diff --git a/dts/src/arm64/marvell/armada-cp11x.dtsi b/dts/src/arm64/marvell/armada-cp11x.dtsi index 9dcf16beab..4ec1aae0a3 100644 --- a/dts/src/arm64/marvell/armada-cp11x.dtsi +++ b/dts/src/arm64/marvell/armada-cp11x.dtsi @@ -25,7 +25,7 @@ * The cooling maps are empty as there are no cooling devices. */ thermal-zones { - CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) { polling-delay-passive = <0>; /* Interrupt driven */ polling-delay = <0>; /* Interrupt driven */ @@ -58,8 +58,10 @@ ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; CP11X_LABEL(ethernet): ethernet@0 { + #address-cells = <1>; + #size-cells = <0>; compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; + reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; @@ -69,7 +71,7 @@ status = "disabled"; dma-coherent; - CP11X_LABEL(eth0): eth0 { + CP11X_LABEL(eth0): ethernet-port@0 { interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, <43 IRQ_TYPE_LEVEL_HIGH>, <47 IRQ_TYPE_LEVEL_HIGH>, @@ -83,12 +85,13 @@ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", "hif5", "hif6", "hif7", "hif8", "link"; - port-id = <0>; + reg = <0>; + port-id = <0>; /* For backward compatibility. */ gop-port-id = <0>; status = "disabled"; }; - CP11X_LABEL(eth1): eth1 { + CP11X_LABEL(eth1): ethernet-port@1 { interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, <44 IRQ_TYPE_LEVEL_HIGH>, <48 IRQ_TYPE_LEVEL_HIGH>, @@ -102,12 +105,13 @@ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", "hif5", "hif6", "hif7", "hif8", "link"; - port-id = <1>; + reg = <1>; + port-id = <1>; /* For backward compatibility. */ gop-port-id = <2>; status = "disabled"; }; - CP11X_LABEL(eth2): eth2 { + CP11X_LABEL(eth2): ethernet-port@2 { interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, <45 IRQ_TYPE_LEVEL_HIGH>, <49 IRQ_TYPE_LEVEL_HIGH>, @@ -121,7 +125,8 @@ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", "hif5", "hif6", "hif7", "hif8", "link"; - port-id = <2>; + reg = <2>; + port-id = <2>; /* For backward compatibility. */ gop-port-id = <3>; status = "disabled"; }; @@ -234,12 +239,17 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, <85 IRQ_TYPE_LEVEL_HIGH>, <84 IRQ_TYPE_LEVEL_HIGH>, <83 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; }; @@ -250,12 +260,17 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, <81 IRQ_TYPE_LEVEL_HIGH>, <80 IRQ_TYPE_LEVEL_HIGH>, <79 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; }; }; @@ -275,7 +290,26 @@ }; }; - CP11X_LABEL(usb3_0): usb3@500000 { + CP11X_LABEL(utmi): utmi@580000 { + compatible = "marvell,cp110-utmi-phy"; + reg = <0x580000 0x2000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + CP11X_LABEL(utmi0): usb-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + CP11X_LABEL(utmi1): usb-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + CP11X_LABEL(usb3_0): usb@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x500000 0x4000>; @@ -287,7 +321,7 @@ status = "disabled"; }; - CP11X_LABEL(usb3_1): usb3@510000 { + CP11X_LABEL(usb3_1): usb@510000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x510000 0x4000>; @@ -434,7 +468,7 @@ status = "disabled"; }; - CP11X_LABEL(nand_controller): nand@720000 { + CP11X_LABEL(nand_controller): nand-controller@720000 { /* * Due to the limitation of the pins available * this controller is only usable on the CPM @@ -464,7 +498,7 @@ status = "okay"; }; - CP11X_LABEL(sdhci0): sdhci@780000 { + CP11X_LABEL(sdhci0): mmc@780000 { compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/marvell/cn9130-crb-A.dts b/dts/src/arm64/marvell/cn9130-crb-A.dts new file mode 100644 index 0000000000..a7b6dfba8a --- /dev/null +++ b/dts/src/arm64/marvell/cn9130-crb-A.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#include "cn9130-crb.dtsi" + +/ { + model = "Marvell Armada CN9130-CRB-A"; +}; + +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; diff --git a/dts/src/arm64/marvell/cn9130-crb-B.dts b/dts/src/arm64/marvell/cn9130-crb-B.dts new file mode 100644 index 0000000000..0904cb0309 --- /dev/null +++ b/dts/src/arm64/marvell/cn9130-crb-B.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#include "cn9130-crb.dtsi" + +/ { + model = "Marvell Armada CN9130-CRB-B"; +}; + +&cp0_pcie0 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0>; + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_sata0 { + status = "okay"; + sata-port@0 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy2 0>; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + phys = <&cp0_comphy1 0>; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + phys = <&cp0_comphy3 1>; +}; diff --git a/dts/src/arm64/marvell/cn9130-crb.dtsi b/dts/src/arm64/marvell/cn9130-crb.dtsi new file mode 100644 index 0000000000..6fcc34f7b4 --- /dev/null +++ b/dts/src/arm64/marvell/cn9130-crb.dtsi @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#include "cn9130.dtsi" /* include SoC device tree */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_mmc_vccq: ap0_mmc_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_mmc_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 5 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 8 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy0 { + compatible = "usb-nop-xceiv"; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp0_gpio2 18 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>; + los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + status = "okay"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC U6 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + status = "okay"; + mmc-ddr-1_8v; + vqmmc-supply = <&ap0_reg_mmc_vccq>; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_sdhci_cd_pins_crb: cp0-sdhci-cd-pins-crb { + marvell,pins = "mpp55"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi1_pins: cp0-spi-pins-1 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + }; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + expander0: mcp23x17@20 { + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + status = "okay"; + }; +}; + +&cp0_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; +}; + + +&cp0_sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins_crb>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; + status = "okay"; +}; + +&cp0_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + reg = <0x700680 0x50>, /* control */ + <0x2000000 0x1000000>; /* CS0 */ + status = "okay"; + + flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_mdio { + status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + switch6: ethernet-switch@6 { + /* Actual device is MV88E6393X */ + compatible = "marvell,mv88e6190"; + reg = <6>; + interrupt-parent = <&cp0_gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + dsa,member = <0 0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@1 { + reg = <1>; + label = "p1"; + phy-handle = <&switch0phy1>; + }; + + ethernet-port@2 { + reg = <2>; + label = "p2"; + phy-handle = <&switch0phy2>; + }; + + ethernet-port@3 { + reg = <3>; + label = "p3"; + phy-handle = <&switch0phy3>; + }; + + ethernet-port@4 { + reg = <4>; + label = "p4"; + phy-handle = <&switch0phy4>; + }; + + ethernet-port@5 { + reg = <5>; + label = "p5"; + phy-handle = <&switch0phy5>; + }; + + ethernet-port@6 { + reg = <6>; + label = "p6"; + phy-handle = <&switch0phy6>; + }; + + ethernet-port@7 { + reg = <7>; + label = "p7"; + phy-handle = <&switch0phy7>; + }; + + ethernet-port@8 { + reg = <8>; + label = "p8"; + phy-handle = <&switch0phy8>; + }; + + ethernet-port@9 { + reg = <9>; + label = "p9"; + phy-mode = "10gbase-r"; + sfp = <&sfp>; + managed = "in-band-status"; + }; + + ethernet-port@a { + reg = <10>; + ethernet = <&cp0_eth0>; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + switch0phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + switch0phy7: ethernet-phy@7 { + reg = <0x7>; + }; + + switch0phy8: ethernet-phy@8 { + reg = <0x8>; + }; + }; + }; +}; + +&cp0_xmdio { + status = "okay"; + nbaset_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + /* This port is connected to 88E6393X switch */ + status = "okay"; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + phys = <&cp0_comphy4 0>; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + /* This port uses "2500base-t" phy-mode */ + status = "disabled"; + phy = <&nbaset_phy0>; + phys = <&cp0_comphy5 2>; +}; + diff --git a/dts/src/arm64/marvell/cn9130-db-B.dts b/dts/src/arm64/marvell/cn9130-db-B.dts new file mode 100644 index 0000000000..57e41cacd4 --- /dev/null +++ b/dts/src/arm64/marvell/cn9130-db-B.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9130-DB board (setup "B"). + */ + +#include "cn9130-db.dtsi" + +/ { + model = "Marvell Armada CN9130-DB setup B"; +}; + +/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When NAND controller is enabled, SPI1 should be disabled. + */ + +&cp0_nand_controller { + status = "okay"; +}; + diff --git a/dts/src/arm64/marvell/cn9130-db-comexpress.dtsi b/dts/src/arm64/marvell/cn9130-db-comexpress.dtsi new file mode 100644 index 0000000000..028496ebc4 --- /dev/null +++ b/dts/src/arm64/marvell/cn9130-db-comexpress.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the CN9130-DB Com Express CPU module board. + */ + +#include "cn9130-db.dtsi" + +/ { + model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board"; + compatible = "marvell,cn9130-cpu-module", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + +}; + +&ap0_reg_sd_vccq { + regulator-max-microvolt = <1800000>; + states = <1800000 0x1 1800000 0x0>; + /delete-property/ gpios; +}; + +&cp0_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_usb3_vbus1 { + /delete-property/ gpio; +}; + +&cp0_reg_sd_vcc { + status = "disabled"; +}; + +&cp0_reg_sd_vccq { + status = "disabled"; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_eth0 { + status = "disabled"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + status = "disabled"; +}; + +&cp0_mdio { + status = "okay"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + phy0: ethernet-phy@0 { + status = "okay"; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + }; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_spi1 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + /delete-property/ phys; +}; diff --git a/dts/src/arm64/marvell/cn9130-db.dts b/dts/src/arm64/marvell/cn9130-db.dts index ce49a70d88..994f347f29 100644 --- a/dts/src/arm64/marvell/cn9130-db.dts +++ b/dts/src/arm64/marvell/cn9130-db.dts @@ -5,399 +5,18 @@ * Device tree for the CN9130-DB board. */ -#include "cn9130.dtsi" - -#include <dt-bindings/gpio/gpio.h> +#include "cn9130-db.dtsi" / { - model = "Marvell Armada CN9130-DB"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - i2c0 = &cp0_i2c0; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - spi1 = &cp0_spi0; - spi2 = &cp0_spi1; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ap0_reg_sd_vccq: ap0_sd_vccq@0 { - compatible = "regulator-gpio"; - regulator-name = "ap0_sd_vccq"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 3300000 0x0>; - }; - - cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "cp0-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; - }; - - cp0_usb3_0_phy0: cp0_usb3_phy@0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_vbus0>; - }; - - cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { - compatible = "regulator-fixed"; - regulator-name = "cp0-xhci1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; - }; - - cp0_usb3_0_phy1: cp0_usb3_phy@1 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_vbus1>; - }; - - cp0_reg_sd_vccq: cp0_sd_vccq@0 { - compatible = "regulator-gpio"; - regulator-name = "cp0_sd_vccq"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; - }; - - cp0_reg_sd_vcc: cp0_sd_vcc@0 { - compatible = "regulator-fixed"; - regulator-name = "cp0_sd_vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - cp0_sfp_eth0: sfp-eth@0 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_sfpp0_i2c>; - los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; - /* - * SFP cages are unconnected on early PCBs because of an the I2C - * lanes not being connected. Prevent the port for being - * unusable by disabling the SFP node. - */ - status = "disabled"; - }; -}; - -&uart0 { - status = "okay"; -}; - -/* on-board eMMC - U9 */ -&ap_sdhci0 { - pinctrl-names = "default"; - bus-width = <8>; - vqmmc-supply = <&ap0_reg_sd_vccq>; - status = "okay"; + model = "Marvell Armada CN9130-DB setup A"; }; -&cp0_crypto { - status = "disabled"; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp0_eth0 { - status = "disabled"; - phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp0_comphy4 0>; - managed = "in-band-status"; - sfp = <&cp0_sfp_eth0>; -}; - -/* CON56 */ -&cp0_eth1 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; -}; - -/* CON57 */ -&cp0_eth2 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - clock-frequency = <100000>; - - /* U36 */ - expander0: pca953x@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - status = "okay"; - }; - - /* U42 */ - eeprom0: eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - pagesize = <0x20>; - }; - - /* U38 */ - eeprom1: eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - pagesize = <0x20>; - }; -}; - -&cp0_i2c1 { - status = "okay"; - clock-frequency = <100000>; - - /* SLM-1521-V2 - U3 */ - i2c-mux@72 { /* verify address - depends on dpr */ - compatible = "nxp,pca9544"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - cp0_sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - /* U12 */ - cp0_module_expander1: pca9555@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - }; - - }; - }; -}; - -&cp0_mdio { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -/* U54 */ -&cp0_nand_controller { - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_rb>; - - nand@0 { - reg = <0>; - label = "main-storage"; - nand-rb = <0>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x200000>; - }; - partition@200000 { - label = "Linux"; - reg = <0x200000 0xd00000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - }; -}; - -/* SLM-1521-V2, CON6 */ -&cp0_pcie0 { - status = "okay"; - num-lanes = <4>; - num-viewport = <8>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp0_comphy0 0 - &cp0_comphy1 0 - &cp0_comphy2 0 - &cp0_comphy3 0>; -}; - -&cp0_sata0 { - status = "okay"; - - /* SLM-1521-V2, CON2 */ - sata-port@1 { - status = "okay"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp0_comphy5 1>; - }; -}; - -/* CON 28 */ -&cp0_sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_sdhci_pins - &cp0_sdhci_cd_pins>; - bus-width = <4>; - cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; - no-1-8-v; - vqmmc-supply = <&cp0_reg_sd_vccq>; - vmmc-supply = <&cp0_reg_sd_vcc>; -}; +/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When SPI controller is enabled, NAND should be disabled. + */ -/* U55 */ &cp0_spi1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; - reg = <0x700680 0x50>; - - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - /* On-board MUX does not allow higher frequencies */ - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot-0"; - reg = <0x0 0x200000>; - }; - - partition@400000 { - label = "Filesystem-0"; - reg = <0x200000 0xe00000>; - }; - }; - }; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp0_i2c0_pins: cp0-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_i2c1_pins: cp0-i2c-pins-1 { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { - marvell,pins = "mpp0", "mpp1", "mpp2", - "mpp3", "mpp4", "mpp5", - "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - cp0_sdhci_pins: cp0-sdhi-pins-0 { - marvell,pins = "mpp56", "mpp57", "mpp58", - "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - cp0_spi0_pins: cp0-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - nand_pins: nand-pins { - marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", - "mpp19", "mpp20", "mpp21", "mpp22", - "mpp23", "mpp24", "mpp25", "mpp26", - "mpp27"; - marvell,function = "dev"; - }; - nand_rb: nand-rb { - marvell,pins = "mpp13"; - marvell,function = "nf"; - }; - }; -}; - -&cp0_usb3_0 { - status = "okay"; - usb-phy = <&cp0_usb3_0_phy0>; - phy-names = "usb"; }; -&cp0_usb3_1 { - status = "okay"; - usb-phy = <&cp0_usb3_0_phy1>; - phy-names = "usb"; -}; diff --git a/dts/src/arm64/marvell/cn9130-db.dtsi b/dts/src/arm64/marvell/cn9130-db.dtsi new file mode 100644 index 0000000000..6eb6a175de --- /dev/null +++ b/dts/src/arm64/marvell/cn9130-db.dtsi @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + reg = <0x700680 0x50>; + + flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi1_pins: cp0-spi-pins-1 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_utmi { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; +}; diff --git a/dts/src/arm64/marvell/cn9130.dtsi b/dts/src/arm64/marvell/cn9130.dtsi index a2b7e5ec97..327b041341 100644 --- a/dts/src/arm64/marvell/cn9130.dtsi +++ b/dts/src/arm64/marvell/cn9130.dtsi @@ -11,6 +11,13 @@ model = "Marvell Armada CN9130 SoC"; compatible = "marvell,cn9130", "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; }; /* @@ -35,3 +42,11 @@ #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE #undef CP11X_PCIE2_BASE + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/cn9131-db-B.dts b/dts/src/arm64/marvell/cn9131-db-B.dts new file mode 100644 index 0000000000..183b1ec8b1 --- /dev/null +++ b/dts/src/arm64/marvell/cn9131-db-B.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9131-DB board (setup "B"). + */ + +#include "cn9131-db.dtsi" + +/ { + model = "Marvell Armada CN9131-DB setup B"; +}; + +/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When NAND controller is enabled, SPI1 should be disabled. + */ + +&cp0_nand_controller { + status = "okay"; +}; + diff --git a/dts/src/arm64/marvell/cn9131-db-comexpress.dtsi b/dts/src/arm64/marvell/cn9131-db-comexpress.dtsi new file mode 100644 index 0000000000..6f3914bcfd --- /dev/null +++ b/dts/src/arm64/marvell/cn9131-db-comexpress.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the CN9131-DB Com Express CPU module board. + */ + +#include "cn9131-db.dtsi" + +/ { + model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board"; + compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + +}; + +&ap0_reg_sd_vccq { + regulator-max-microvolt = <1800000>; + states = <1800000 0x1 1800000 0x0>; + /delete-property/ gpios; +}; + +&cp0_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_usb3_vbus1 { + /delete-property/ gpio; +}; + +&cp1_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_sd_vcc { + status = "disabled"; +}; + +&cp0_reg_sd_vccq { + status = "disabled"; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_eth0 { + status = "disabled"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + status = "disabled"; +}; + +&cp0_mdio { + status = "okay"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + phy0: ethernet-phy@0 { + status = "okay"; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + }; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_spi1 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/dts/src/arm64/marvell/cn9131-db.dts b/dts/src/arm64/marvell/cn9131-db.dts index 3c975f98b2..a60fdee79b 100644 --- a/dts/src/arm64/marvell/cn9131-db.dts +++ b/dts/src/arm64/marvell/cn9131-db.dts @@ -5,198 +5,18 @@ * Device tree for the CN9131-DB board. */ -#include "cn9130-db.dts" +#include "cn9131-db.dtsi" / { - model = "Marvell Armada CN9131-DB"; - compatible = "marvell,cn9131", "marvell,cn9130", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - aliases { - gpio3 = &cp1_gpio1; - gpio4 = &cp1_gpio2; - ethernet3 = &cp1_eth0; - ethernet4 = &cp1_eth1; - }; - - cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_xhci0_vbus_pins>; - regulator-name = "cp1-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - cp1_usb3_0_phy0: cp1_usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp1_reg_usb3_vbus0>; - }; - - cp1_sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&cp1_i2c0>; - los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_sfp_pins>; - /* - * SFP cages are unconnected on early PCBs because of an the I2C - * lanes not being connected. Prevent the port for being - * unusable by disabling the SFP node. - */ - status = "disabled"; - }; + model = "Marvell Armada CN9131-DB setup A"; }; -/* - * Instantiate the first slave CP115 +/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When SPI controller is enabled, NAND should be disabled. */ -#define CP11X_NAME cp1 -#define CP11X_BASE f4000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f4600000 -#define CP11X_PCIE1_BASE f4620000 -#define CP11X_PCIE2_BASE f4640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp1_crypto { - status = "disabled"; -}; - -&cp1_ethernet { - status = "okay"; -}; - -/* CON50 */ -&cp1_eth0 { - status = "disabled"; - phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy4 0>; - managed = "in-band-status"; - sfp = <&cp1_sfp_eth1>; -}; - -&cp1_gpio1 { - status = "okay"; -}; - -&cp1_gpio2 { - status = "okay"; -}; - -&cp1_i2c0 { +&cp0_spi1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_i2c0_pins>; - clock-frequency = <100000>; }; -/* CON40 */ -&cp1_pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp1_pcie_reset_pins>; - num-lanes = <2>; - num-viewport = <8>; - marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; - status = "okay"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy0 0 - &cp1_comphy1 0>; -}; - -&cp1_sata0 { - status = "okay"; - - /* CON32 */ - sata-port@1 { - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy5 1>; - }; -}; - -/* U24 */ -&cp1_spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_spi0_pins>; - reg = <0x700680 0x50>; - - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - /* On-board MUX does not allow higher frequencies */ - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot-1"; - reg = <0x0 0x200000>; - }; - - partition@400000 { - label = "Filesystem-1"; - reg = <0x200000 0xe00000>; - }; - }; - }; - -}; - -&cp1_syscon0 { - cp1_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp1_i2c0_pins: cp1-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp1_spi0_pins: cp1-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - cp1_sfp_pins: sfp-pins { - marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; - marvell,function = "gpio"; - }; - cp1_pcie_reset_pins: cp1-pcie-reset-pins { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - }; -}; - -/* CON58 */ -&cp1_usb3_1 { - status = "okay"; - usb-phy = <&cp1_usb3_0_phy0>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy3 1>; - phy-names = "usb"; -}; diff --git a/dts/src/arm64/marvell/cn9131-db.dtsi b/dts/src/arm64/marvell/cn9131-db.dtsi new file mode 100644 index 0000000000..ff8422fae3 --- /dev/null +++ b/dts/src/arm64/marvell/cn9131-db.dtsi @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dtsi" + +/ { + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_utmi { + status = "okay"; +}; + +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>, <&cp1_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; +}; diff --git a/dts/src/arm64/marvell/cn9132-db-B.dts b/dts/src/arm64/marvell/cn9132-db-B.dts new file mode 100644 index 0000000000..7137a6f22d --- /dev/null +++ b/dts/src/arm64/marvell/cn9132-db-B.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9132-db.dtsi" + +/ { + model = "Marvell Armada CN9132-DB setup B"; +}; + +/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When NAND controller is enabled, SPI1 should be disabled. + */ + +&cp0_nand_controller { + status = "okay"; +}; + diff --git a/dts/src/arm64/marvell/cn9132-db.dts b/dts/src/arm64/marvell/cn9132-db.dts index 4ef0df3097..1f2e6377af 100644 --- a/dts/src/arm64/marvell/cn9132-db.dts +++ b/dts/src/arm64/marvell/cn9132-db.dts @@ -5,217 +5,18 @@ * Device tree for the CN9132-DB board. */ -#include "cn9131-db.dts" +#include "cn9132-db.dtsi" / { - model = "Marvell Armada CN9132-DB"; - compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - aliases { - gpio5 = &cp2_gpio1; - gpio6 = &cp2_gpio2; - ethernet5 = &cp2_eth0; - }; - - cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy0: cp2_usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus0>; - }; - - cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy1: cp2_usb3_phy1 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus1>; - }; - - cp2_reg_sd_vccq: cp2_sd_vccq@0 { - compatible = "regulator-gpio"; - regulator-name = "cp2_sd_vcc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 3300000 0x0>; - }; - - cp2_sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp2_sfpp0_i2c>; - los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; - /* - * SFP cages are unconnected on early PCBs because of an the I2C - * lanes not being connected. Prevent the port for being - * unusable by disabling the SFP node. - */ - status = "disabled"; - }; + model = "Marvell Armada CN9132-DB setup A"; }; -/* - * Instantiate the second slave CP115 +/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When SPI controller is enabled, NAND should be disabled. */ -#define CP11X_NAME cp2 -#define CP11X_BASE f6000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f6600000 -#define CP11X_PCIE1_BASE f6620000 -#define CP11X_PCIE2_BASE f6640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp2_crypto { - status = "disabled"; -}; - -&cp2_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp2_eth0 { - status = "disabled"; - phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy4 0>; - managed = "in-band-status"; - sfp = <&cp2_sfp_eth0>; -}; - -&cp2_gpio1 { - status = "okay"; -}; - -&cp2_gpio2 { - status = "okay"; -}; - -&cp2_i2c0 { - clock-frequency = <100000>; - - /* SLM-1521-V2 - U3 */ - i2c-mux@72 { - compatible = "nxp,pca9544"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - cp2_sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - /* U12 */ - cp2_module_expander1: pca9555@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - }; - }; - }; -}; - -/* SLM-1521-V2, CON6 */ -&cp2_pcie0 { - status = "okay"; - num-lanes = <2>; - num-viewport = <8>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy0 0 - &cp2_comphy1 0>; -}; - -/* SLM-1521-V2, CON8 */ -&cp2_pcie2 { - status = "okay"; - num-lanes = <1>; - num-viewport = <8>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy5 2>; -}; - -&cp2_sata0 { +&cp0_spi1 { status = "okay"; - - /* SLM-1521-V2, CON4 */ - sata-port@0 { - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy2 0>; - }; }; -/* CON 2 on SLM-1683 - microSD */ -&cp2_sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp2_sdhci_pins>; - bus-width = <4>; - cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&cp2_reg_sd_vccq>; -}; - -&cp2_syscon0 { - cp2_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp2_i2c0_pins: cp2-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp2_sdhci_pins: cp2-sdhi-pins-0 { - marvell,pins = "mpp56", "mpp57", "mpp58", - "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - }; -}; - -&cp2_usb3_0 { - status = "okay"; - usb-phy = <&cp2_usb3_0_phy0>; - phy-names = "usb"; -}; - -/* SLM-1521-V2, CON11 */ -&cp2_usb3_1 { - status = "okay"; - usb-phy = <&cp2_usb3_0_phy1>; - phy-names = "usb"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy3 1>; -}; diff --git a/dts/src/arm64/marvell/cn9132-db.dtsi b/dts/src/arm64/marvell/cn9132-db.dtsi new file mode 100644 index 0000000000..512a4fa286 --- /dev/null +++ b/dts/src/arm64/marvell/cn9132-db.dtsi @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dtsi" + +/ { + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-r"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_utmi { + status = "okay"; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phys = <&cp2_utmi0>; + phy-names = "usb"; + dr_mode = "host"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>, <&cp2_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; +}; |