diff options
Diffstat (limited to 'dts/src/arm64/mediatek/mt2712-evb.dts')
-rw-r--r-- | dts/src/arm64/mediatek/mt2712-evb.dts | 92 |
1 files changed, 84 insertions, 8 deletions
diff --git a/dts/src/arm64/mediatek/mt2712-evb.dts b/dts/src/arm64/mediatek/mt2712-evb.dts index 2b91daf5c1..0c38f7b517 100644 --- a/dts/src/arm64/mediatek/mt2712-evb.dts +++ b/dts/src/arm64/mediatek/mt2712-evb.dts @@ -11,6 +11,7 @@ / { model = "MediaTek MT2712 evaluation board"; + chassis-type = "embedded"; compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; aliases { @@ -26,14 +27,14 @@ stdout-path = "serial0:921600n8"; }; - cpus_fixed_vproc0: fixedregulator@0 { + cpus_fixed_vproc0: regulator-vproc-buck0 { compatible = "regulator-fixed"; regulator-name = "vproc_buck0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; - cpus_fixed_vproc1: fixedregulator@1 { + cpus_fixed_vproc1: regulator-vproc-buck1 { compatible = "regulator-fixed"; regulator-name = "vproc_buck1"; regulator-min-microvolt = <1000000>; @@ -42,15 +43,15 @@ extcon_usb: extcon_iddig { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; }; extcon_usb1: extcon_iddig1 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>; }; - usb_p0_vbus: regulator@2 { + usb_p0_vbus: regulator-usb-p0-vbus { compatible = "regulator-fixed"; regulator-name = "p0_vbus"; regulator-min-microvolt = <5000000>; @@ -59,7 +60,7 @@ enable-active-high; }; - usb_p1_vbus: regulator@3 { + usb_p1_vbus: regulator-usb-p1-vbus { compatible = "regulator-fixed"; regulator-name = "p1_vbus"; regulator-min-microvolt = <5000000>; @@ -68,7 +69,7 @@ enable-active-high; }; - usb_p2_vbus: regulator@4 { + usb_p2_vbus: regulator-usb-p2-vbus { compatible = "regulator-fixed"; regulator-name = "p2_vbus"; regulator-min-microvolt = <5000000>; @@ -77,7 +78,7 @@ enable-active-high; }; - usb_p3_vbus: regulator@5 { + usb_p3_vbus: regulator-usb-p3-vbus { compatible = "regulator-fixed"; regulator-name = "p3_vbus"; regulator-min-microvolt = <5000000>; @@ -105,7 +106,82 @@ proc-supply = <&cpus_fixed_vproc1>; }; +ð { + phy-mode = "rgmii-rxid"; + phy-handle = <ðernet_phy0>; + mediatek,tx-delay-ps = <1530>; + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; + snps,reset-delays-us = <0 10000 10000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default>; + pinctrl-1 = <ð_sleep>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@5 { + compatible = "ethernet-phy-id0243.0d90"; + reg = <0x5>; + }; + }; +}; + &pio { + eth_default: eth_default { + tx_pins { + pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>, + <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>, + <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>, + <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>, + <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>, + <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>; + drive-strength = <MTK_DRIVE_8mA>; + }; + rx_pins { + pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>, + <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>, + <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>, + <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>, + <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>, + <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>; + input-enable; + }; + mdio_pins { + pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>, + <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>; + drive-strength = <MTK_DRIVE_8mA>; + input-enable; + }; + }; + + eth_sleep: eth_sleep { + tx_pins { + pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>, + <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>, + <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>, + <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>, + <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>, + <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>; + }; + rx_pins { + pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>, + <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>, + <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>, + <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>, + <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>, + <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>; + input-disable; + }; + mdio_pins { + pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>, + <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>; + input-disable; + bias-disable; + }; + }; + usb0_id_pins_float: usb0_iddig { pins_iddig { pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; |