diff options
Diffstat (limited to 'dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts')
-rw-r--r-- | dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts b/dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts index 43a823990a..6e23428a3e 100644 --- a/dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts +++ b/dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts @@ -40,9 +40,90 @@ >; }; +&pio { + bt_pins: bt-pins { + pins-bt-kill { + pinmux = <PINMUX_GPIO144__FUNC_GPIO144>; + output-low; + }; + + pins-bt-wake { + pinmux = <PINMUX_GPIO22__FUNC_GPIO22>; + bias-pull-up; + }; + + pins-ap-wake-bt { + pinmux = <PINMUX_GPIO168__FUNC_GPIO168>; + output-low; + }; + }; + + uart1_pins: uart1-pins { + pins-rx { + pinmux = <PINMUX_GPIO94__FUNC_URXD1>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO95__FUNC_UTXD1>; + }; + + pins-cts { + pinmux = <PINMUX_GPIO166__FUNC_UCTS1>; + input-enable; + }; + + pins-rts { + pinmux = <PINMUX_GPIO167__FUNC_URTS1>; + }; + }; + + uart1_pins_sleep: uart1-sleep-pins { + pins-rx { + pinmux = <PINMUX_GPIO94__FUNC_GPIO94>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO95__FUNC_UTXD1>; + }; + + pins-cts { + pinmux = <PINMUX_GPIO166__FUNC_UCTS1>; + input-enable; + }; + + pins-rts { + pinmux = <PINMUX_GPIO167__FUNC_URTS1>; + }; + }; +}; + &touchscreen { compatible = "hid-over-i2c"; post-power-on-delay-ms = <10>; hid-descr-addr = <0x0001>; vdd-supply = <&pp3300_u>; }; + +&uart1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins>; + pinctrl-1 = <&uart1_pins_sleep>; + /delete-property/ interrupts; + interrupts-extended = <&gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>, + <&pio 94 IRQ_TYPE_EDGE_FALLING>; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + + enable-gpios = <&pio 144 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&pio 168 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&pio 22 GPIO_ACTIVE_LOW>; + }; +}; |