diff options
Diffstat (limited to 'dts/src/arm64/qcom/apq8096-db820c.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/apq8096-db820c.dtsi | 93 |
1 files changed, 48 insertions, 45 deletions
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dtsi b/dts/src/arm64/qcom/apq8096-db820c.dtsi index defcbd15ed..068692350e 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dtsi +++ b/dts/src/arm64/qcom/apq8096-db820c.dtsi @@ -41,14 +41,14 @@ / { aliases { - serial0 = &blsp2_uart1; - serial1 = &blsp2_uart2; - serial2 = &blsp1_uart1; - i2c0 = &blsp1_i2c2; + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c0; - spi0 = &blsp1_spi0; - spi1 = &blsp2_spi5; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; }; chosen { @@ -133,24 +133,24 @@ }; }; -&blsp1_i2c2 { +&blsp1_i2c3 { /* On Low speed expansion */ label = "LS-I2C0"; status = "okay"; }; -&blsp1_spi0 { +&blsp1_spi1 { /* On Low speed expansion */ label = "LS-SPI0"; status = "okay"; }; -&blsp1_uart1 { +&blsp1_uart2 { label = "BT-UART"; status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; bluetooth { compatible = "qcom,qca6174-bt"; @@ -162,7 +162,11 @@ }; }; -&blsp2_i2c0 { +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c1 { /* On High speed expansion */ label = "HS-I2C2"; status = "okay"; @@ -174,32 +178,36 @@ status = "okay"; }; -&blsp2_spi5 { +&blsp2_spi6 { /* On High speed expansion */ label = "HS-SPI1"; status = "okay"; }; -&blsp2_uart1 { +&blsp2_uart2 { label = "LS-UART1"; status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_2pins_default>; - pinctrl-1 = <&blsp2_uart1_2pins_sleep>; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; }; -&blsp2_uart2 { +&blsp2_uart3 { label = "LS-UART0"; status = "disabled"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_4pins_default>; - pinctrl-1 = <&blsp2_uart2_4pins_sleep>; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; }; &camss { vdda-supply = <&vreg_l2a_1p25>; }; +&gpu { + status = "okay"; +}; + &hdmi { status = "okay"; @@ -245,7 +253,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; -&msmgpio { +&pm8994_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&tlmm { gpio-line-names = "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ @@ -424,7 +437,7 @@ }; }; - blsp1_uart1_default: blsp1_uart1_default { + blsp1_uart2_default: blsp1_uart2_default { mux { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "blsp_uart2"; @@ -437,7 +450,7 @@ }; }; - blsp1_uart1_sleep: blsp1_uart1_sleep { + blsp1_uart2_sleep: blsp1_uart2_sleep { mux { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "gpio"; @@ -505,20 +518,20 @@ &pcie0 { status = "okay"; - perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; - perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; - perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; @@ -929,9 +942,9 @@ &sdhc2 { /* External SD card */ pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 0x1>; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; status = "okay"; @@ -1026,20 +1039,6 @@ }; }; -&spmi_bus { - pmic@0 { - pon@800 { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - }; -}; - &ufsphy { status = "okay"; @@ -1064,7 +1063,7 @@ status = "okay"; extcon = <&usb2_id>; - dwc3@7600000 { + usb@7600000 { extcon = <&usb2_id>; dr_mode = "otg"; maximum-speed = "high-speed"; @@ -1075,7 +1074,7 @@ status = "okay"; extcon = <&usb3_id>; - dwc3@6a00000 { + usb@6a00000 { extcon = <&usb3_id>; dr_mode = "otg"; }; @@ -1089,6 +1088,10 @@ }; +&venus { + status = "okay"; +}; + &wcd9335 { clock-names = "mclk", "slimbus"; clocks = <&div1_mclk>, |