diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8916-acer-a1-724.dts')
| -rw-r--r-- | dts/src/arm64/qcom/msm8916-acer-a1-724.dts | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/dts/src/arm64/qcom/msm8916-acer-a1-724.dts b/dts/src/arm64/qcom/msm8916-acer-a1-724.dts new file mode 100644 index 0000000000..ed3fa7b357 --- /dev/null +++ b/dts/src/arm64/qcom/msm8916-acer-a1-724.dts @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* + * NOTE: The original firmware from Acer can only boot 32-bit kernels. + * To boot this device tree using arm64 it is necessary to flash 64-bit + * TZ/HYP firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724) + * for suggested installation instructions. + */ + +/ { + model = "Acer Iconia Talk S A1-724"; + compatible = "acer,a1-724", "qcom,msm8916"; + chassis-type = "tablet"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Actually ft5446 */ + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l16>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; |