diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi | 670 |
1 files changed, 670 insertions, 0 deletions
diff --git a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi new file mode 100644 index 0000000000..91e3912821 --- /dev/null +++ b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ + qcom,board-id = <8 0>; + + clocks { + compatible = "simple-bus"; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk_pin>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + cam0_vdig_vreg: cam0-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam0_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_vdig_default>; + }; + + cam1_vdig_vreg: cam1-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam1_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_vdig_default>; + vin-supply = <&vreg_s3a_1p35>; + }; + + cam_vio_vreg: cam-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vio_default>; + vin-supply = <&vreg_lvs1a_1p8>; + }; + + touch_vddio_vreg: touch-vddio-vreg { + compatible = "regulator-fixed"; + regulator-name = "touch_vddio_vreg"; + startup-delay-us = <10000>; + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vddio_en>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-down { + label = "Volume Down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEDOWN>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor0_default>; + + hall-sensor0 { + label = "Cover Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + gpio-key,wakeup; + debounce-interval = <30>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + adsp_region: memory@fe000000 { + reg = <0x0 0xfe000000 0x0 0x800000>; + no-map; + }; + + qseecom_region: memory@fe800000 { + reg = <0x0 0xfe800000 0x0 0x1400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vib_default>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_n>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&touch_vddio_vreg>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5_sleep { + bias-disable; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&ibb { + regulator-min-microamp = <800000>; + regulator-max-microamp = <800000>; + regulator-enable-ramp-delay = <200>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <600>; + regulator-settling-time-down-us = <1000>; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-enable-ramp-delay = <500>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <50000>; + regulator-settling-time-down-us = <3000>; + regulator-soft-start; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + regulator-always-on; + }; + }; +}; + +&pm8998_gpio { + vol_down_pin_a: vol-down-active { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + audio_mclk_pin: audio-mclk-pin-active { + pins = "gpio13"; + function = "func2"; + power-source = <0>; + }; +}; + +&pmi8998_gpio { + cam_vio_default: cam-vio-active { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + power-source = <1>; + }; + + vib_default: vib-en { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <0>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEUP>; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2032000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-system-load = <73400>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-system-load = <12560>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l14a_1p85: l14 { + regulator-min-microvolt = <1848000>; + regulator-max-microvolt = <1856000>; + regulator-system-load = <32000>; + regulator-allow-set-load; + }; + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p85: l18 {}; + vreg_l19a_2p7: l19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_ven: nfc-ven { + pins = "gpio12"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + msm_mclk0_default: msm-mclk0-active { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk1_default: msm-mclk1-active { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio18", "gpio19"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cam0_vdig_default: cam0-vdig-default { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam1_vdig_default: cam1-vdig-default { + pins = "gpio25"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + hall_sensor0_default: acc-cover-open { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_vddio_en: ts-vddio-en-default { + pins = "gpio133"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; +}; + +/* + * WARNING: + * Disable UFS until card quirks are in to avoid unrecoverable hard-brick + * that would happen as soon as the UFS card gets probed as, without the + * required quirks, the bootloader will be erased right after card probe. + */ +&ufshc { + status = "disabled"; +}; + +&ufsphy { + status = "disabled"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + /* Force to peripheral until we have Type-C hooked up */ + dr_mode = "peripheral"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; |