1 files changed, 86 insertions, 20 deletions

diff --git a/dts/src/arm64/qcom/pm8150l.dtsi b/dts/src/arm64/qcom/pm8150l.dtsi
index eb0e9a090e..ac08a09c64 100644
--- a/dts/src/arm64/qcom/pm8150l.dtsi
+++ b/dts/src/arm64/qcom/pm8150l.dtsi
@@ -8,6 +8,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8150l-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@4 {
 		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
@@ -15,14 +46,23 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		power-on@800 {
+		pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x0800>;
 
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,44 +70,43 @@
 			#io-channel-cells = <1>;
 			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
-			ref-gnd@0 {
+			channel@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
 				label = "ref_gnd";
 			};
 
-			vref-1p25@1 {
+			channel@1 {
 				reg = <ADC5_1P25VREF>;
 				qcom,pre-scaling = <1 1>;
 				label = "vref_1p25";
 			};
 
-			die-temp@6 {
+			channel@6 {
 				reg = <ADC5_DIE_TEMP>;
 				qcom,pre-scaling = <1 1>;
 				label = "die_temp";
 			};
 		};
 
+		pm8150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pm8150l_gpios: gpio@c000 {
-			compatible = "qcom,pm8150l-gpio";
+			compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
+			gpio-ranges = <&pm8150l_gpios 0 0 12>;
 			#gpio-cells = <2>;
-			interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
@@ -76,5 +115,32 @@
 		reg = <0x5 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm8150l_flash: led-controller@d300 {
+			compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pm8150l_lpg: pwm {
+			compatible = "qcom,pm8150l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8150l_wled: leds@d800 {
+			compatible = "qcom,pm8150l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
 	};
 };