diff options
Diffstat (limited to 'dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi | 83 |
1 files changed, 47 insertions, 36 deletions
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi index 9b3e3d13c1..2ba3bbf3b9 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi @@ -5,27 +5,29 @@ * Copyright 2021 Google LLC. */ -#include "sc7180-trogdor.dtsi" +/* This file must be included after sc7180-trogdor.dtsi */ + +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { /* BOARD-SPECIFIC TOP LEVEL NODES */ - max98360a_1: max98360a_1 { + max98360a_1: amplifier-1 { compatible = "maxim,max98360a"; #sound-dai-cells = <0>; }; - max98360a_2: max98360a_2 { + max98360a_2: amplifier-2 { compatible = "maxim,max98360a"; #sound-dai-cells = <0>; }; - max98360a_3: max98360a_3 { + max98360a_3: amplifier-3 { compatible = "maxim,max98360a"; #sound-dai-cells = <0>; }; - pp3300_touch: pp3300-touch { + pp3300_touch: pp3300-touch-regulator { compatible = "regulator-fixed"; regulator-name = "pp3300_touch"; @@ -85,6 +87,24 @@ }; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + /* + * The atna33xc20 really likes to be power cycled to keep it from + * getting in a bad state. This is the reason that the touchscreen + * rail and eDP rails are separate from each other on homestar (but + * not other trogdor devices) Make sure it starts "off" at bootup. + */ + /delete-property/ regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; @@ -98,6 +118,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; vdd-supply = <&pp3300_touch>; @@ -114,6 +135,12 @@ ap_ts_pen_1v8: &i2c4 { status = "okay"; }; +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + &panel { compatible = "samsung,atna33xc20"; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; @@ -121,10 +148,11 @@ ap_ts_pen_1v8: &i2c4 { }; &pm6150_adc { - skin-temp-thermistor@4d { + channel@4d { reg = <ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "skin_therm"; }; }; @@ -174,30 +202,19 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; -&sec_mi2s_active{ - pinmux { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - function = "mi2s_1"; - }; +&sec_mi2s_active { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; }; &ts_reset_l { - pinconf { - /* - * We want reset state by default and it will be up to the - * driver to disable this when it's ready. - */ - output-low; - }; + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; }; /* PINCTRL - board-specific pinctrl */ @@ -327,16 +344,10 @@ ap_ts_pen_1v8: &i2c4 { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - en_pp3300_touch: en-pp3300-touch { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_touch: en-pp3300-touch-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; |