diff options
Diffstat (limited to 'dts/src/arm64/qcom/sc7180-trogdor.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/sc7180-trogdor.dtsi | 91 |
1 files changed, 15 insertions, 76 deletions
diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi index 8ed7dd39f6..07c8b2c926 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi @@ -298,40 +298,6 @@ regulator-max-microvolt = <1128000>; }; - /* - * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just - * inputs to other rails on AOP-managed PMICs on trogdor. - * The system is already configured to manage these rails - * automatically (enable when needed, adjust voltage for - * headroom) so we won't specify anything here. - * - * NOTE: though the rails have a voltage implied by their - * name, the automatic headroom calculation might not result - * in them being that voltage. ...and that's OK. - * Specifically the only point of these rails is to provide - * an input source for other rails and if we can satisify the - * needs of those other rails with a lower source voltage then - * we save power. - */ - - pp1200_l1a: ldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1000_l2a: ldo2 { - regulator-min-microvolt = <944000>; - regulator-max-microvolt = <1056000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1000_l3a: ldo3 { - regulator-min-microvolt = <968000>; - regulator-max-microvolt = <1064000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdd_qlink_lv: vdd_qlink_lv_ck: vdd_qusb_hs0_core: @@ -350,24 +316,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp2700_l5a: ldo5 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ebi0_cal: - ebi1_cal: - vddio_ck_ebi0: - vddio_ck_ebi1: - vddio_ebi0: - vddq: - pp600_l6a: ldo6 { - regulator-min-microvolt = <568000>; - regulator-max-microvolt = <648000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdd_cx_wlan: pp800_l9a: ldo9 { regulator-min-microvolt = <488000>; @@ -404,6 +352,11 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + /* + * On trogdor this needs to match l10a since we use it to + * give power to things like SPI flash which communicate back + * on lines powered by l10a. Thus we force to 1.8V. + */ pp1800_l13a: ldo13 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -424,12 +377,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp2700_l16a: ldo16 { - regulator-min-microvolt = <2496000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdda_qusb_hs0_3p1: vdd_pdphy: pp3100_l17a: ldo17 { @@ -463,8 +410,8 @@ }; pp1800_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -491,25 +438,10 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ld_pp1800_esim_l4c: - vddpx_5: - pp1800_l4c: ldo4 { - regulator-min-microvolt = <1648000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vddpx_6: - pp1800_l5c: ldo5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vddpx_2: ppvar_l6c: ldo6 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3304000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -936,6 +868,13 @@ ap_spi_fp: &spi10 { /* PINCTRL - additions to nodes defined in sc7180.dtsi */ +&dp_hot_plug_det { + pinconf { + pins = "gpio117"; + bias-disable; + }; +}; + &qspi_cs0 { pinconf { pins = "gpio68"; |