1 files changed, 22 insertions, 32 deletions

diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
index eb6b2b676e..e0fda4d754 100644
--- a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 
@@ -46,7 +47,7 @@
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -97,6 +98,12 @@
 			no-map;
 		};
 
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 0x2400000>;
+			no-map;
+		};
+
 		rmtfs_mem: memory@f6301000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0 0xf6301000 0 0x200000>;
@@ -123,7 +130,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -299,12 +306,13 @@
 };
 
 &ipa {
-	status = "okay";
+	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
 	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
+	status = "okay";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";
@@ -325,14 +333,9 @@
 	qcom,cabc;
 };
 
-&pm8998_pon {
-	resin {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pmi8998_rradc {
@@ -379,7 +382,7 @@
 };
 
 &sound {
-	compatible = "qcom,db845c-sndcard";
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active
 			&quat_mi2s_sd0_active>;
 	pinctrl-names = "default";
@@ -445,40 +448,31 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio126";
 		function = "gpio";
 		bias-pull-up;
 	};
-
-	wcd_intr_default: wcd_intr_default {
-		pins = <54>;
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -546,11 +540,7 @@
 	firmware-name = "qcom/sdm845/beryllium/venus.mbn";
 };
 
-&wcd9340{
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+&wcd9340 {
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;