diff options
Diffstat (limited to 'dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts')
| -rw-r--r-- | dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts | 34 |
1 files changed, 20 insertions, 14 deletions
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts index 938b76bd05..1850325e1d 100644 --- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2021, Xilinx, Inc. + * (C) Copyright 2015 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -90,12 +91,16 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem2_default>; - phy0: ethernet-phy@5 { - reg = <5>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@5 { + reg = <5>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + }; }; }; @@ -109,8 +114,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; - scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; tca6416_u26: gpio@20 { compatible = "ti,tca6416"; @@ -214,7 +219,7 @@ }; }; - pinctrl_i2c0_gpio: i2c0-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { mux { groups = "gpio0_6_grp", "gpio0_7_grp"; function = "gpio0"; @@ -281,19 +286,22 @@ conf { groups = "usb1_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; }; conf-rx { pins = "MIO64", "MIO65", "MIO67"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", "MIO75"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; @@ -485,8 +493,6 @@ &dwc3_1 { status = "okay"; dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; }; &uart0 { |