diff options
Diffstat (limited to 'dts/src/arm64')
507 files changed, 32531 insertions, 5914 deletions
diff --git a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts index 9ec49ac2f6..381d58cea0 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts @@ -291,6 +291,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi b/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi index 4903d63581..855b7d43bc 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi @@ -166,6 +166,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi index ca1d287a0a..d11e5041ba 100644 --- a/dts/src/arm64/allwinner/sun50i-h6.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi @@ -406,6 +406,7 @@ function = "spi1"; }; + /omit-if-no-ref/ spdif_tx_pin: spdif-tx-pin { pins = "PH7"; function = "spdif"; @@ -655,10 +656,8 @@ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; resets = <&ccu RST_BUS_SPDIF>; - dmas = <&dma 2>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pin>; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts index dbce61b355..4bfb52609c 100644 --- a/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts +++ b/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>. */ diff --git a/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi index 1fed2b46cf..af421ba24c 100644 --- a/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>. */ @@ -93,7 +93,7 @@ interrupt-controller; #interrupt-cells = <1>; - regulators{ + regulators { reg_dcdc1: dcdc1 { regulator-name = "vdd-gpu-sys"; regulator-min-microvolt = <810000>; diff --git a/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts b/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts index 832f08b2b2..ff84a37944 100644 --- a/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts +++ b/dts/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>. */ diff --git a/dts/src/arm64/allwinner/sun50i-h616.dtsi b/dts/src/arm64/allwinner/sun50i-h616.dtsi index d549d277d9..b2e85e52d1 100644 --- a/dts/src/arm64/allwinner/sun50i-h616.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h616.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/reset/sun50i-h616-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -133,11 +134,28 @@ #reset-cells = <1>; }; + dma: dma-controller@3002000 { + compatible = "allwinner,sun50i-h616-dma", + "allwinner,sun50i-a100-dma"; + reg = <0x03002000 0x1000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <49>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + sid: efuse@3006000 { compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid"; reg = <0x03006000 0x1000>; #address-cells = <1>; #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x8>; + }; }; watchdog: watchdog@30090a0 { @@ -240,6 +258,11 @@ function = "spi1"; }; + spdif_tx_pin: spdif-tx-pin { + pins = "PH4"; + function = "spdif"; + }; + uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; @@ -256,6 +279,12 @@ pins = "PG8", "PG9"; function = "uart1"; }; + + /omit-if-no-ref/ + x32clk_fanout_pin: x32clk-fanout-pin { + pins = "PG10"; + function = "clock"; + }; }; gic: interrupt-controller@3021000 { @@ -339,6 +368,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; + dmas = <&dma 14>, <&dma 14>; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -350,6 +381,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -361,6 +394,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; + dmas = <&dma 16>, <&dma 16>; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -372,6 +407,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART3>; + dmas = <&dma 17>, <&dma 17>; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; @@ -383,6 +420,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART4>; + dmas = <&dma 18>, <&dma 18>; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; @@ -394,6 +433,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART5>; + dmas = <&dma 19>, <&dma 19>; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART5>; status = "disabled"; }; @@ -405,6 +446,8 @@ reg = <0x05002000 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; + dmas = <&dma 43>, <&dma 43>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_I2C0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -420,6 +463,8 @@ reg = <0x05002400 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; + dmas = <&dma 44>, <&dma 44>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; @@ -433,6 +478,8 @@ reg = <0x05002800 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; + dmas = <&dma 45>, <&dma 45>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; @@ -446,6 +493,8 @@ reg = <0x05002c00 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C3>; + dmas = <&dma 46>, <&dma 46>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_I2C3>; status = "disabled"; #address-cells = <1>; @@ -459,6 +508,8 @@ reg = <0x05003000 0x400>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C4>; + dmas = <&dma 47>, <&dma 47>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_I2C4>; status = "disabled"; #address-cells = <1>; @@ -472,6 +523,8 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_SPI0>; status = "disabled"; #address-cells = <1>; @@ -485,6 +538,8 @@ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_SPI1>; status = "disabled"; #address-cells = <1>; @@ -511,6 +566,34 @@ }; }; + spdif: spdif@5093000 { + compatible = "allwinner,sun50i-h616-spdif"; + reg = <0x05093000 0x400>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + clock-names = "apb", "spdif"; + resets = <&ccu RST_BUS_SPDIF>; + dmas = <&dma 2>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h616-ths"; + reg = <0x05070400 0x400>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + allwinner,sram = <&syscon>; + #thermal-sensor-cells = <1>; + }; + usbotg: usb@5100000 { compatible = "allwinner,sun50i-h616-musb", "allwinner,sun8i-h3-musb"; @@ -734,6 +817,8 @@ reg = <0x07081400 0x400>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_R_APB2_I2C>; + dmas = <&dma 48>, <&dma 48>; + dma-names = "rx", "tx"; resets = <&r_ccu RST_R_APB2_I2C>; status = "disabled"; #address-cells = <1>; @@ -755,4 +840,74 @@ #size-cells = <0>; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 2>; + sustainable-power = <1000>; + + trips { + cpu_threshold: cpu-trip-0 { + temperature = <60000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_target: cpu-trip-1 { + temperature = <70000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_critical: cpu-trip-2 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + sustainable-power = <1100>; + + trips { + gpu_temp_critical: gpu-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ve-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + + trips { + ve_temp_critical: ve-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 3>; + + trips { + ddr_temp_critical: ddr-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + }; }; diff --git a/dts/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi b/dts/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi new file mode 100644 index 0000000000..8c1263a393 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) Jisheng Zhang <jszhang@kernel.org> + */ + +#include "sun50i-h616.dtsi" + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8-pll"; + }; + + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-io"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&pio { + vcc-pc-supply = <®_dldo1>; + vcc-pf-supply = <®_dldo1>; + vcc-pg-supply = <®_aldo1>; + vcc-ph-supply = <®_dldo1>; + vcc-pi-supply = <®_dldo1>; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts b/dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts new file mode 100644 index 0000000000..18b29c6b86 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) Jisheng Zhang <jszhang@kernel.org> + */ + +/dts-v1/; + +#include "sun50i-h618-longan-module-3h.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Sipeed Longan Pi 3H"; + compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618"; + + aliases { + ethernet0 = &emac0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */ + }; + + led-1 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */ + }; + }; + + reg_vcc5v: regulator-vcc5v { + /* board wide 5V supply directly from the USB-C socket */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; +}; + +&axp313 { + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +/* WiFi & BT combo module is connected to this Host */ +&ehci3 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + allwinner,rx-delay-ps = <3100>; + allwinner,tx-delay-ps = <700>; + phy-supply = <®_vcc3v3>; + status = "okay"; +}; + +&mdio0 { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usbotg { + /* + * PHY0 pins are connected to a USB-C socket, but a role switch + * is not implemented: both CC pins are pulled to GND. + * The VBUS pins power the device, so a fixed peripheral mode + * is the best choice. + * The board can be powered via GPIOs, in this case port0 *can* + * act as a host (with a cable/adapter ignoring CC), as VBUS is + * then provided by the GPIOs. Any user of this setup would + * need to adjust the DT accordingly: dr_mode set to "host", + * enabling OHCI0 and EHCI0. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + usb2_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts b/dts/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts index 8ea1fd41ae..ac0a2b7ea6 100644 --- a/dts/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts +++ b/dts/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts @@ -15,6 +15,7 @@ compatible = "transpeed,8k618-t", "allwinner,sun50i-h618"; aliases { + ethernet1 = &sdio_wifi; serial0 = &uart0; }; @@ -39,6 +40,15 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + pinctrl-0 = <&x32clk_fanout_pin>; + pinctrl-names = "default"; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + }; }; &ehci0 { @@ -60,6 +70,19 @@ status = "okay"; }; +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + }; +}; + &mmc2 { vmmc-supply = <®_dldo1>; vqmmc-supply = <®_aldo1>; diff --git a/dts/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts b/dts/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts new file mode 100644 index 0000000000..b6e3c16979 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2023 ARM Ltd. + +/dts-v1/; + +#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Remix Mini PC"; + compatible = "jide,remix-mini-pc", "allwinner,sun50i-h64", + "allwinner,sun50i-a64"; + + aliases { + ethernet1 = &rtl8723bs; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc5v: regulator-5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + post-power-on-delay-ms = <200>; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +/* Connects to the AC200 chip */ +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c0_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_aldo1>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_eldo1>; + bus-width = <8>; + non-removable; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_dcdc1>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_dcdc1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo4>; + vcc-ph-supply = <®_dcdc1>; +}; + +&r_ir { + status = "okay"; +}; + +&r_pio { + /* + * We cannot add that supply for now since it would create a circular + * dependency between pinctrl, the regulator and the RSB Bus. + * + * vcc-pl-supply = <®_aldo2>; + */ +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + vin5-supply = <®_vcc5v>; + vin6-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + dldoin-supply = <®_vcc5v>; + eldoin-supply = <®_vcc5v>; + fldoin-supply = <®_vcc5v>; + drivevbus-supply = <®_vcc5v>; + ips-supply = <®_vcc5v>; + + status = "okay"; + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +/* Deviates from the reset default of 1.1V. */ +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-sys"; +}; + +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + /* Specifying R_PIO consumer would create circular dependency. */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +/* AC200 power supply */ +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ave-33"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-cpvdd-dram-emmc"; +}; + +/* Supplies the arisc management core, needed by TF-A to power off cores. */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_hdmi { + vcc-hdmi-supply = <®_dcdc1>; +}; + +&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Left DAC", "DACL", + "Right DAC", "DACR", + "Headphone Jack", "HP", + "ADCL", "Left ADC", + "ADCR", "Right ADC", + "MIC2", "Microphone Jack"; + status = "okay"; +}; + +/* On the (unpopulated) UART pads. */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_drivevbus>; + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/amlogic-c3.dtsi b/dts/src/arm64/amlogic/amlogic-c3.dtsi index 2ad1f8eef1..32a754fe79 100644 --- a/dts/src/arm64/amlogic/amlogic-c3.dtsi +++ b/dts/src/arm64/amlogic/amlogic-c3.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/amlogic,c3-reset.h> / { cpus { @@ -81,6 +82,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + reset: reset-controller@2000 { + compatible = "amlogic,c3-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; + watchdog@2100 { compatible = "amlogic,c3-wdt", "amlogic,t7-wdt"; reg = <0x0 0x2100 0x0 0x10>; diff --git a/dts/src/arm64/amlogic/amlogic-t7.dtsi b/dts/src/arm64/amlogic/amlogic-t7.dtsi index a03c7667d2..5248bdf824 100644 --- a/dts/src/arm64/amlogic/amlogic-t7.dtsi +++ b/dts/src/arm64/amlogic/amlogic-t7.dtsi @@ -54,7 +54,7 @@ enable-method = "psci"; }; - cpu101: cpu@101{ + cpu101: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x101>; @@ -171,6 +171,16 @@ }; }; + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,t7-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + uart_a: serial@78000 { compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart"; reg = <0x0 0x78000 0x0 0x18>; diff --git a/dts/src/arm64/amlogic/meson-a1-ad402.dts b/dts/src/arm64/amlogic/meson-a1-ad402.dts index 1c20516fa6..4bc30af058 100644 --- a/dts/src/arm64/amlogic/meson-a1-ad402.dts +++ b/dts/src/arm64/amlogic/meson-a1-ad402.dts @@ -106,7 +106,7 @@ pinctrl-0 = <&spifc_pins>; pinctrl-names = "default"; - spi_nand@0 { + flash@0 { compatible = "spi-nand"; status = "okay"; reg = <0>; diff --git a/dts/src/arm64/amlogic/meson-a1.dtsi b/dts/src/arm64/amlogic/meson-a1.dtsi index 648e7f4942..c03e207ea6 100644 --- a/dts/src/arm64/amlogic/meson-a1.dtsi +++ b/dts/src/arm64/amlogic/meson-a1.dtsi @@ -450,6 +450,8 @@ <&clkc_periphs CLKID_USB_BUS>, <&clkc_periphs CLKID_USB_CTRL_IN>; clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl"; + assigned-clocks = <&clkc_periphs CLKID_USB_BUS>; + assigned-clock-rates = <64000000>; resets = <&reset RESET_USBCTRL>; reset-name = "usb_ctrl"; diff --git a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi index db605f3a22..9b65ae818e 100644 --- a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi +++ b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi @@ -35,7 +35,7 @@ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -44,7 +44,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC5V"; regulator-min-microvolt = <5000000>; @@ -52,7 +52,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -61,7 +61,7 @@ regulator-always-on; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -70,7 +70,7 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <3300000>; @@ -79,7 +79,7 @@ regulator-always-on; }; - vccq_1v8: regulator-vccq_1v8 { + vccq_1v8: regulator-vccq-1v8 { compatible = "regulator-fixed"; regulator-name = "VCCQ_1V8"; regulator-min-microvolt = <1800000>; @@ -88,7 +88,7 @@ regulator-always-on; }; - usb_pwr: regulator-usb_pwr { + usb_pwr: regulator-usb-pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; @@ -332,19 +332,3 @@ "", "", "", "", "", // 80 - 84 "", ""; // 85-86 }; - -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; diff --git a/dts/src/arm64/amlogic/meson-axg-s400.dts b/dts/src/arm64/amlogic/meson-axg-s400.dts index c8905663bc..7ed526f451 100644 --- a/dts/src/arm64/amlogic/meson-axg-s400.dts +++ b/dts/src/arm64/amlogic/meson-axg-s400.dts @@ -12,7 +12,7 @@ compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; model = "Amlogic Meson AXG S400 Development Board"; - adc_keys { + keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; @@ -111,7 +111,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -119,7 +119,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -128,7 +128,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC5V"; regulator-min-microvolt = <5000000>; @@ -139,7 +139,7 @@ enable-active-high; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -148,7 +148,7 @@ regulator-always-on; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -157,7 +157,7 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; @@ -166,7 +166,7 @@ regulator-always-on; }; - usb_pwr: regulator-usb_pwr { + usb_pwr: regulator-usb-pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index 7e5ac9db93..6d12b760b9 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -74,6 +74,8 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -83,6 +85,8 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -92,6 +96,8 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -101,6 +107,8 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; l2: l2-cache0 { diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi index ff68b911b7..9d5eab6595 100644 --- a/dts/src/arm64/amlogic/meson-g12-common.dtsi +++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi @@ -2502,6 +2502,9 @@ clocks = <&clkc CLKID_NNA_CORE_CLK>, <&clkc CLKID_NNA_AXI_CLK>; clock-names = "core", "bus"; + assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>, + <&clkc CLKID_NNA_AXI_CLK>; + assigned-clock-rates = <800000000>, <800000000>; resets = <&reset RESET_NNA>; status = "disabled"; }; diff --git a/dts/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso b/dts/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso new file mode 100644 index 0000000000..9591fdc31e --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2024 Freebox SAS + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +&uart_A { + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + +&sd_emmc_a { + /* Per mmc-controller.yaml */ + #address-cells = <1>; + #size-cells = <0>; + /* NB: may be either AP6398S or AP6398SR3 wifi module */ + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso b/dts/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso new file mode 100644 index 0000000000..55fff35b09 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2024 Freebox SAS + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +&uart_A { + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&sd_emmc_a { + /* No explicit compatible for rtl8822cs sdio */ +}; diff --git a/dts/src/arm64/amlogic/meson-g12a-fbx8am.dts b/dts/src/arm64/amlogic/meson-g12a-fbx8am.dts new file mode 100644 index 0000000000..af211d8f39 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-fbx8am.dts @@ -0,0 +1,462 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2024 Freebox SAS + +/* + * SEI codename: SEI530FB (based on SEI510) + * Freebox codename: fbx8am + * Commercial names: Freebox Pop, Player TV Free 4K + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "freebox,fbx8am", "amlogic,g12a"; + model = "Freebox Player Pop"; + chassis-type = "embedded"; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + /* Physical user-accessible reset button near USB port */ + power-button { + label = "Reset"; + linux,code = <BTN_MISC>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + + spdif_dit: audio-codec-2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ao_5v: regulator-ao-5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddao_3v3_t: regulator-vddao-3v3-t { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3_T"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&ao_5v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <10>; /* required for 43752 */ + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "fbx8am"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout_a>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&spdifout_a { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, + <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, + <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts b/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts index fcd7e1d8e1..15b9bc2807 100644 --- a/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts +++ b/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts @@ -60,7 +60,7 @@ clock-names = "ext_clock"; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -68,7 +68,7 @@ regulator-always-on; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -77,7 +77,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -86,7 +86,7 @@ regulator-always-on; }; - hdmi_pw: regulator-hdmi_pw { + hdmi_pw: regulator-hdmi-pw { compatible = "regulator-fixed"; regulator-name = "HDMI_PW"; regulator-min-microvolt = <5000000>; @@ -95,7 +95,7 @@ regulator-always-on; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -104,7 +104,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-g12a-sei510.dts b/dts/src/arm64/amlogic/meson-g12a-sei510.dts index 4c4550dd47..61cb8135a3 100644 --- a/dts/src/arm64/amlogic/meson-g12a-sei510.dts +++ b/dts/src/arm64/amlogic/meson-g12a-sei510.dts @@ -15,7 +15,7 @@ compatible = "seirobotics,sei510", "amlogic,g12a"; model = "SEI Robotics SEI510"; - adc_keys { + keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; @@ -83,7 +83,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -92,7 +92,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -100,7 +100,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -109,7 +109,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -118,7 +118,7 @@ regulator-always-on; }; - vddao_3v3_t: regultor-vddao_3v3_t { + vddao_3v3_t: regulator-vddao-3v3-t { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3_T"; regulator-min-microvolt = <3300000>; @@ -147,7 +147,7 @@ regulator-always-on; }; - vddio_ao1v8: regulator-vddio_ao1v8 { + vddio_ao1v8: regulator-vddio-ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-g12a-u200.dts b/dts/src/arm64/amlogic/meson-g12a-u200.dts index 8355ddd7e9..3da7922d83 100644 --- a/dts/src/arm64/amlogic/meson-g12a-u200.dts +++ b/dts/src/arm64/amlogic/meson-g12a-u200.dts @@ -75,7 +75,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -84,7 +84,7 @@ regulator-always-on; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -92,7 +92,7 @@ regulator-always-on; }; - usb_pwr_en: regulator-usb_pwr_en { + usb_pwr_en: regulator-usb-pwr-en { compatible = "regulator-fixed"; regulator-name = "USB_PWR_EN"; regulator-min-microvolt = <5000000>; @@ -103,7 +103,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -112,7 +112,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -122,7 +122,7 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -133,7 +133,7 @@ enable-active-high; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -142,7 +142,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts index 9b55982b6a..05c7a1e3f1 100644 --- a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts +++ b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts @@ -66,7 +66,7 @@ clock-names = "ext_clock"; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -75,7 +75,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -83,7 +83,7 @@ regulator-always-on; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -92,7 +92,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -102,7 +102,7 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -112,7 +112,7 @@ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -121,7 +121,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi index 91c9769fda..d80dd9a3da 100644 --- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi @@ -19,7 +19,7 @@ status = "okay"; }; - hub_5v: regulator-hub_5v { + hub_5v: regulator-hub-5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; regulator-min-microvolt = <5000000>; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid.dtsi index 9e12a34b28..09d959aefb 100644 --- a/dts/src/arm64/amlogic/meson-g12b-odroid.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b-odroid.dtsi @@ -48,7 +48,7 @@ }; }; - tflash_vdd: regulator-tflash_vdd { + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; @@ -60,7 +60,7 @@ regulator-always-on; }; - tf_io: gpio-regulator-tf_io { + tf_io: gpio-regulator-tf-io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; @@ -74,7 +74,7 @@ <1800000 1>; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -83,7 +83,7 @@ regulator-always-on; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -91,7 +91,7 @@ regulator-always-on; }; - usb_pwr_en: regulator-usb_pwr_en { + usb_pwr_en: regulator-usb-pwr-en { compatible = "regulator-fixed"; regulator-name = "USB_PWR_EN"; regulator-min-microvolt = <5000000>; @@ -103,7 +103,7 @@ enable-active-high; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "5V"; regulator-min-microvolt = <5000000>; @@ -114,7 +114,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -123,7 +123,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -171,7 +171,7 @@ regulator-always-on; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -180,7 +180,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-g12b-w400.dtsi b/dts/src/arm64/amlogic/meson-g12b-w400.dtsi index ac8b717825..4cb6930ffb 100644 --- a/dts/src/arm64/amlogic/meson-g12b-w400.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b-w400.dtsi @@ -39,7 +39,7 @@ clock-names = "ext_clock"; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -48,7 +48,7 @@ regulator-always-on; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -56,7 +56,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -67,7 +67,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -76,7 +76,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi index 5e7b9273b0..efd662a452 100644 --- a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi +++ b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi @@ -84,7 +84,7 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -93,7 +93,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -120,7 +120,7 @@ }; }; - vcc_card: regulator-vcc_card { + vcc_card: regulator-vcc-card { compatible = "regulator-fixed"; regulator-name = "VCC_CARD"; regulator-min-microvolt = <3300000>; @@ -141,7 +141,7 @@ gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -150,7 +150,7 @@ regulator-always-on; }; - vddio_ao3v3: regulator-vddio_ao3v3 { + vddio_ao3v3: regulator-vddio-ao3v3 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO3V3"; regulator-min-microvolt = <3300000>; @@ -159,7 +159,7 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi index e59c3c92b1..08d6b69ba4 100644 --- a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi @@ -50,28 +50,28 @@ regulator-always-on; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts index 4aab1ab705..cca129ce2c 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts @@ -78,21 +78,21 @@ <3300000 1>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts index e6d2de7c45..c431986e6a 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -67,7 +67,7 @@ regulator-always-on; }; - hdmi_p5v0: regulator-hdmi_p5v0 { + hdmi_p5v0: regulator-hdmi-p5v0 { compatible = "regulator-fixed"; regulator-name = "HDMI_P5V0"; regulator-min-microvolt = <5000000>; @@ -76,7 +76,7 @@ vin-supply = <&p5v0>; }; - tflash_vdd: regulator-tflash_vdd { + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; @@ -92,7 +92,7 @@ vin-supply = <&vddio_ao3v3>; }; - tf_io: gpio-regulator-tf_io { + tf_io: gpio-regulator-tf-io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; @@ -148,7 +148,7 @@ vin-supply = <&p5v0>; }; - ddr3_1v5: regulator-ddr3_1v5 { + ddr3_1v5: regulator-ddr3-1v5 { compatible = "regulator-fixed"; regulator-name = "DDR3_1V5"; regulator-min-microvolt = <1500000>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p200.dts b/dts/src/arm64/amlogic/meson-gxbb-p200.dts index 591455c50e..7f94716876 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p200.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-p200.dts @@ -21,14 +21,14 @@ sound-name-prefix = "DIT"; }; - avdd18_usb_adc: regulator-avdd18_usb_adc { + avdd18_usb_adc: regulator-avdd18-usb-adc { compatible = "regulator-fixed"; regulator-name = "AVDD18_USB_ADC"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - adc_keys { + keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi index e803a466fe..52d57773a7 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi @@ -53,21 +53,21 @@ regulator-settling-time-down-us = <150000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi index 74df325342..255e93a0b3 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi @@ -47,28 +47,28 @@ enable-active-high; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi index 94dafb9553..deb2952271 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi @@ -49,21 +49,21 @@ enable-active-high; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -71,7 +71,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts index a29b49f051..90ef9c17d8 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -42,7 +42,7 @@ }; }; - dc_5v: regulator-dc_5v { + dc_5v: regulator-dc-5v { compatible = "regulator-fixed"; regulator-name = "DC_5V"; regulator-min-microvolt = <5000000>; @@ -89,7 +89,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -98,7 +98,7 @@ regulator-always-on; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -107,7 +107,7 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts index c0d6eb5510..08a4718219 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts @@ -64,28 +64,28 @@ reg = <0x0 0x0 0x0 0x20000000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts index a18d6d241a..2b94b6e528 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -37,28 +37,28 @@ stdout-path = "serial0:115200n8"; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index c8d74e61de..89fe5110f7 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -42,21 +42,21 @@ <3300000 1>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 2825db91e4..63b2086006 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -67,7 +67,7 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -76,7 +76,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -93,7 +93,7 @@ regulator-always-on; }; - vcc_card: regulator-vcc_card { + vcc_card: regulator-vcc-card { compatible = "regulator-fixed"; regulator-name = "VCC_CARD"; regulator-min-microvolt = <3300000>; @@ -114,7 +114,7 @@ gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; }; - vddio_ao3v3: regulator-vddio_ao3v3 { + vddio_ao3v3: regulator-vddio-ao3v3 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO3V3"; regulator-min-microvolt = <3300000>; @@ -139,7 +139,7 @@ regulator-settling-time-down-us = <50000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -148,7 +148,7 @@ regulator-always-on; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC 1V8"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts index 27093e6ac9..8b26c9661b 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -93,7 +93,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -117,7 +117,7 @@ regulator-settling-time-down-us = <50000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -125,7 +125,7 @@ }; /* This is provided by LDOs on the eMMC daugther card */ - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts index f1acca5c44..c79f9f2099 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -42,21 +42,21 @@ <3300000 1>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi index a150cc0e18..7e7dc87ede 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi @@ -39,28 +39,28 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts index 860f307494..07e7c3bede 100644 --- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts +++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts @@ -112,28 +112,28 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts index 4eda9f634c..a66f19851a 100644 --- a/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts +++ b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts @@ -14,7 +14,7 @@ "amlogic,meson-gxm"; model = "Libre Computer AML-S912-PC"; - typec2_vbus: regulator-typec2_vbus { + typec2_vbus: regulator-typec2-vbus { compatible = "regulator-fixed"; regulator-name = "TYPEC2_VBUS"; regulator-min-microvolt = <5000000>; diff --git a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi index 514a6dd4b1..e78cc9b577 100644 --- a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi +++ b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi @@ -80,7 +80,7 @@ clock-names = "ext_clock"; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -88,7 +88,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -99,7 +99,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -108,7 +108,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -118,7 +118,7 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; @@ -127,7 +127,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_AO1V8"; regulator-min-microvolt = <1800000>; @@ -136,7 +136,7 @@ regulator-always-on; }; - vsys_3v3: regulator-vsys_3v3 { + vsys_3v3: regulator-vsys-3v3 { compatible = "regulator-fixed"; regulator-name = "VSYS_3V3"; regulator-min-microvolt = <3300000>; @@ -145,7 +145,7 @@ regulator-always-on; }; - usb_pwr: regulator-usb_pwr { + usb_pwr: regulator-usb-pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; diff --git a/dts/src/arm64/amlogic/meson-libretech-cottonwood.dtsi b/dts/src/arm64/amlogic/meson-libretech-cottonwood.dtsi index 35e8f5bae9..082b72703c 100644 --- a/dts/src/arm64/amlogic/meson-libretech-cottonwood.dtsi +++ b/dts/src/arm64/amlogic/meson-libretech-cottonwood.dtsi @@ -150,7 +150,7 @@ gpio-open-drain; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -171,7 +171,7 @@ pwm-dutycycle-range = <100 0>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -180,7 +180,7 @@ vin-supply = <&vddao_3v3>; }; - vddio_c: regulator-vddio_c { + vddio_c: regulator-vddio-c { compatible = "regulator-gpio"; regulator-name = "VDDIO_C"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi b/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi index 46a34731f7..d1fa8b8bf7 100644 --- a/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi +++ b/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi @@ -54,7 +54,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -63,7 +63,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -71,7 +71,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -80,7 +80,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -105,7 +105,7 @@ regulator-always-on; }; - vddio_ao1v8: regulator-vddio_ao1v8 { + vddio_ao1v8: regulator-vddio-ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-sm1-bananapi.dtsi b/dts/src/arm64/amlogic/meson-sm1-bananapi.dtsi index 62404743e6..81dce86290 100644 --- a/dts/src/arm64/amlogic/meson-sm1-bananapi.dtsi +++ b/dts/src/arm64/amlogic/meson-sm1-bananapi.dtsi @@ -82,7 +82,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -91,7 +91,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -99,7 +99,7 @@ regulator-always-on; }; - vddio_c: regulator-vddio_c { + vddio_c: regulator-vddio-c { compatible = "regulator-gpio"; regulator-name = "VDDIO_C"; regulator-min-microvolt = <1800000>; @@ -116,7 +116,7 @@ <3300000 1>; }; - tflash_vdd: regulator-tflash_vdd { + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; regulator-min-microvolt = <3300000>; @@ -127,7 +127,7 @@ regulator-always-on; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -136,7 +136,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -165,7 +165,7 @@ }; /* USB Hub Power Enable */ - vl_pwr_en: regulator-vl_pwr_en { + vl_pwr_en: regulator-vl-pwr-en { compatible = "regulator-fixed"; regulator-name = "VL_PWR_EN"; regulator-min-microvolt = <5000000>; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts b/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts index 846a2d6c20..0170139b8d 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts +++ b/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts @@ -43,7 +43,7 @@ }; /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */ - p12v_0: regulator-p12v_0 { + p12v_0: regulator-p12v-0 { compatible = "regulator-fixed"; regulator-name = "P12V_0"; regulator-min-microvolt = <12000000>; @@ -56,7 +56,7 @@ }; /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */ - p12v_1: regulator-p12v_1 { + p12v_1: regulator-p12v-1 { compatible = "regulator-fixed"; regulator-name = "P12V_1"; regulator-min-microvolt = <12000000>; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi index 1db2327bbd..951eb8e3f0 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi +++ b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi @@ -28,7 +28,7 @@ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; - tflash_vdd: regulator-tflash_vdd { + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; @@ -40,7 +40,7 @@ regulator-always-on; }; - tf_io: gpio-regulator-tf_io { + tf_io: gpio-regulator-tf-io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; @@ -59,7 +59,7 @@ <1800000 1>; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -68,7 +68,7 @@ regulator-always-on; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -76,7 +76,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "5V"; regulator-min-microvolt = <5000000>; @@ -87,7 +87,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -96,7 +96,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -125,7 +125,7 @@ regulator-always-on; }; - usb_pwr_en: regulator-usb_pwr_en { + usb_pwr_en: regulator-usb-pwr-en { compatible = "regulator-fixed"; regulator-name = "USB_PWR_EN"; regulator-min-microvolt = <5000000>; @@ -137,7 +137,7 @@ enable-active-high; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -146,7 +146,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts index 109932068d..3581e14cbf 100644 --- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts +++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts @@ -127,7 +127,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -136,7 +136,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -144,7 +144,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -153,7 +153,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -163,7 +163,7 @@ }; /* Used by Tuner, RGB Led & IR Emitter LED array */ - vddao_3v3_t: regulator-vddao_3v3_t { + vddao_3v3_t: regulator-vddao-3v3-t { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3_T"; regulator-min-microvolt = <3300000>; @@ -192,7 +192,7 @@ regulator-always-on; }; - vddio_ao1v8: regulator-vddio_ao1v8 { + vddio_ao1v8: regulator-vddio-ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/dts/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts index 78204d71ec..999d937302 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts @@ -125,6 +125,11 @@ }; }; +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/dts/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts index fcf092c81b..19fc03ef47 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -155,6 +155,11 @@ }; }; +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/dts/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts index d94a53d683..2a0d4ee3bd 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -166,11 +166,15 @@ }; }; +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; nand-on-flash-bbt; - brcm,nand-has-wp; #address-cells = <1>; #size-cells = <0>; @@ -181,16 +185,17 @@ #size-cells = <1>; partition@0 { - compatible = "nvmem-cells"; label = "cferom"; reg = <0x0 0x100000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x100000>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; - base_mac_addr: mac@106a0 { - reg = <0x106a0 0x6>; + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; }; }; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi index 2f124b027b..e01cf4f540 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi +++ b/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi @@ -227,9 +227,6 @@ brcm,num-gphy = <5>; brcm,num-rgmii-ports = <2>; - #address-cells = <1>; - #size-cells = <0>; - ports: ports { #address-cells = <1>; #size-cells = <0>; @@ -589,7 +586,7 @@ status = "disabled"; }; - nand-controller@1800 { + nand_controller: nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; @@ -597,7 +594,7 @@ reg-names = "nand", "nand-int-base"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "nand_ctlrdy"; - status = "okay"; + status = "disabled"; nandcs: nand@0 { compatible = "brcm,nandcs"; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi index d658c81f72..14b2adfb81 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi +++ b/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi @@ -138,6 +138,20 @@ status = "disabled"; }; + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi index 4f474d4702..589b8a1efc 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi +++ b/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi @@ -119,6 +119,20 @@ status = "disabled"; }; + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi index 909f254dc4..48d618e758 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi +++ b/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi @@ -137,6 +137,20 @@ status = "disabled"; }; + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi index 685ae32951..1d1303cf90 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi +++ b/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi @@ -138,6 +138,20 @@ status = "disabled"; }; + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi index 820553ce54..00c62c1e5d 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi +++ b/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi @@ -119,5 +119,19 @@ num-cs = <8>; status = "disabled"; }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; }; }; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi index 0eb93c2982..caeaf428dc 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi +++ b/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi @@ -156,5 +156,19 @@ num-cs = <8>; status = "disabled"; }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; }; }; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm94908.dts b/dts/src/arm64/broadcom/bcmbca/bcm94908.dts index c4e6e71f63..030ffa5364 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm94908.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm94908.dts @@ -32,3 +32,13 @@ &hsspi { status = "okay"; }; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm94912.dts b/dts/src/arm64/broadcom/bcmbca/bcm94912.dts index e69cd68321..4b779e6c22 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm94912.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm94912.dts @@ -32,3 +32,13 @@ &hsspi { status = "okay"; }; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm963146.dts b/dts/src/arm64/broadcom/bcmbca/bcm963146.dts index db2c82d6df..2851e8e41b 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm963146.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm963146.dts @@ -32,3 +32,13 @@ &hsspi { status = "okay"; }; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm963158.dts b/dts/src/arm64/broadcom/bcmbca/bcm963158.dts index 25c12bc635..17dc594fe8 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm963158.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm963158.dts @@ -32,3 +32,13 @@ &hsspi { status = "okay"; }; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm96813.dts b/dts/src/arm64/broadcom/bcmbca/bcm96813.dts index faba21f031..34832a7347 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm96813.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm96813.dts @@ -32,3 +32,13 @@ &hsspi { status = "okay"; }; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm96856.dts b/dts/src/arm64/broadcom/bcmbca/bcm96856.dts index 9808331eed..e1396b5544 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm96856.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm96856.dts @@ -32,3 +32,13 @@ &hsspi { status = "okay"; }; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm96858.dts b/dts/src/arm64/broadcom/bcmbca/bcm96858.dts index 1f561c8e13..30bbf6f291 100644 --- a/dts/src/arm64/broadcom/bcmbca/bcm96858.dts +++ b/dts/src/arm64/broadcom/bcmbca/bcm96858.dts @@ -32,3 +32,13 @@ &hsspi { status = "okay"; }; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm64/exynos/exynos850.dtsi b/dts/src/arm64/exynos/exynos850.dtsi index da3f4a791e..2ba67c3d06 100644 --- a/dts/src/arm64/exynos/exynos850.dtsi +++ b/dts/src/arm64/exynos/exynos850.dtsi @@ -184,6 +184,16 @@ clock-names = "fin_pll", "mct"; }; + pdma0: dma-controller@120c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x120c0000 0x1000>; + clocks = <&cmu_core CLK_GOUT_PDMA_CORE_ACLK>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + interrupts = <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-broken-no-flushp; + }; + gic: interrupt-controller@12a01000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -728,6 +738,24 @@ <&cmu_peri CLK_GOUT_SPI0_IPCLK>; clock-names = "pclk", "ipclk"; status = "disabled"; + + spi_0: spi@13940000 { + compatible = "samsung,exynos850-spi"; + reg = <0x13940000 0x30>; + clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>, + <&cmu_peri CLK_GOUT_SPI0_IPCLK>; + clock-names = "spi", "spi_busclk0"; + dmas = <&pdma0 5>, <&pdma0 4>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + num-cs = <1>; + samsung,spi-src-clk = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; usi_cmgp0: usi@11d000c0 { @@ -769,6 +797,24 @@ clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; + + spi_1: spi@11d00000 { + compatible = "samsung,exynos850-spi"; + reg = <0x11d00000 0x30>; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>; + clock-names = "spi", "spi_busclk0"; + dmas = <&pdma0 12>, <&pdma0 13>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + num-cs = <1>; + samsung,spi-src-clk = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; usi_cmgp1: usi@11d200c0 { @@ -810,6 +856,24 @@ clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; + + spi_2: spi@11d20000 { + compatible = "samsung,exynos850-spi"; + reg = <0x11d20000 0x30>; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>; + clock-names = "spi", "spi_busclk0"; + dmas = <&pdma0 14>, <&pdma0 15>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + num-cs = <1>; + samsung,spi-src-clk = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; }; diff --git a/dts/src/arm64/exynos/google/gs101-oriole.dts b/dts/src/arm64/exynos/google/gs101-oriole.dts index 4a71f75220..6ccade2c8c 100644 --- a/dts/src/arm64/exynos/google/gs101-oriole.dts +++ b/dts/src/arm64/exynos/google/gs101-oriole.dts @@ -63,6 +63,20 @@ clock-frequency = <200000000>; }; +&hsi2c_8 { + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&hsi2c_12 { + status = "okay"; + /* TODO: add the devices once drivers exist */ +}; + &pinctrl_far_alive { key_voldown: key-voldown-pins { samsung,pins = "gpa7-3"; @@ -99,6 +113,16 @@ status = "okay"; }; +&usi8 { + samsung,mode = <USI_V2_I2C>; + status = "okay"; +}; + +&usi12 { + samsung,mode = <USI_V2_I2C>; + status = "okay"; +}; + &watchdog_cl0 { timeout-sec = <30>; status = "okay"; diff --git a/dts/src/arm64/exynos/google/gs101-pinctrl.dtsi b/dts/src/arm64/exynos/google/gs101-pinctrl.dtsi index e6a9776d4d..a675f822ac 100644 --- a/dts/src/arm64/exynos/google/gs101-pinctrl.dtsi +++ b/dts/src/arm64/exynos/google/gs101-pinctrl.dtsi @@ -251,7 +251,7 @@ #interrupt-cells = <2>; }; - pcie0_clkreq: pcie0-clkreq-pins{ + pcie0_clkreq: pcie0-clkreq-pins { samsung,pins = "gph0-1"; samsung,pin-function = <GS101_PIN_FUNC_2>; samsung,pin-pud = <GS101_PIN_PULL_UP>; diff --git a/dts/src/arm64/exynos/google/gs101.dtsi b/dts/src/arm64/exynos/google/gs101.dtsi index d838e3a7af..55e6bcb368 100644 --- a/dts/src/arm64/exynos/google/gs101.dtsi +++ b/dts/src/arm64/exynos/google/gs101.dtsi @@ -73,7 +73,7 @@ compatible = "arm,cortex-a55"; reg = <0x0000>; enable-method = "psci"; - cpu-idle-states = <&ANANKE_CPU_SLEEP>; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; }; @@ -83,7 +83,7 @@ compatible = "arm,cortex-a55"; reg = <0x0100>; enable-method = "psci"; - cpu-idle-states = <&ANANKE_CPU_SLEEP>; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; }; @@ -93,7 +93,7 @@ compatible = "arm,cortex-a55"; reg = <0x0200>; enable-method = "psci"; - cpu-idle-states = <&ANANKE_CPU_SLEEP>; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; }; @@ -103,7 +103,7 @@ compatible = "arm,cortex-a55"; reg = <0x0300>; enable-method = "psci"; - cpu-idle-states = <&ANANKE_CPU_SLEEP>; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; }; @@ -113,7 +113,7 @@ compatible = "arm,cortex-a76"; reg = <0x0400>; enable-method = "psci"; - cpu-idle-states = <&ENYO_CPU_SLEEP>; + cpu-idle-states = <&ENYO_CPU_SLEEP>; capacity-dmips-mhz = <620>; dynamic-power-coefficient = <284>; }; @@ -123,7 +123,7 @@ compatible = "arm,cortex-a76"; reg = <0x0500>; enable-method = "psci"; - cpu-idle-states = <&ENYO_CPU_SLEEP>; + cpu-idle-states = <&ENYO_CPU_SLEEP>; capacity-dmips-mhz = <620>; dynamic-power-coefficient = <284>; }; @@ -133,7 +133,7 @@ compatible = "arm,cortex-x1"; reg = <0x0600>; enable-method = "psci"; - cpu-idle-states = <&HERA_CPU_SLEEP>; + cpu-idle-states = <&HERA_CPU_SLEEP>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <650>; }; @@ -143,7 +143,7 @@ compatible = "arm,cortex-x1"; reg = <0x0700>; enable-method = "psci"; - cpu-idle-states = <&HERA_CPU_SLEEP>; + cpu-idle-states = <&HERA_CPU_SLEEP>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <650>; }; @@ -180,14 +180,6 @@ }; }; - /* TODO replace with CCF clock */ - dummy_clk: clock-3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12345>; - clock-output-names = "pclk"; - }; - /* ect node is required to be present by bootloader */ ect { }; @@ -292,6 +284,26 @@ clock-names = "bus", "sss"; }; + timer@10050000 { + compatible = "google,gs101-mct", + "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>; + clock-names = "fin_pll", "mct"; + }; + watchdog_cl0: watchdog@10060000 { compatible = "google,gs101-wdt"; reg = <0x10060000 0x100>; @@ -339,9 +351,20 @@ }; }; + cmu_peric0: clock-controller@10800000 { + compatible = "google,gs101-cmu-peric0"; + reg = <0x10800000 0x4000>; + #clock-cells = <1>; + clocks = <&ext_24_5m>, + <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>, + <&cmu_top CLK_DOUT_CMU_PERIC0_IP>; + clock-names = "oscclk", "bus", "ip"; + }; + sysreg_peric0: syscon@10820000 { compatible = "google,gs101-peric0-sysreg", "syscon"; reg = <0x10820000 0x10000>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>; }; pinctrl_peric0: pinctrl@10840000 { @@ -350,6 +373,35 @@ interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>; }; + usi8: usi@109700c0 { + compatible = "google,gs101-usi", + "samsung,exynos850-usi"; + reg = <0x109700c0 0x20>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>, + <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>; + clock-names = "pclk", "ipclk"; + samsung,sysreg = <&sysreg_peric0 0x101c>; + status = "disabled"; + + hsi2c_8: i2c@10970000 { + compatible = "google,gs101-hsi2c", + "samsung,exynosautov9-hsi2c"; + reg = <0x10970000 0xc0>; + interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c8_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>, + <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; + usi_uart: usi@10a000c0 { compatible = "google,gs101-usi", "samsung,exynos850-usi"; @@ -357,7 +409,8 @@ ranges; #address-cells = <1>; #size-cells = <1>; - clocks = <&dummy_clk>, <&dummy_clk>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1020>; samsung,mode = <USI_V2_UART>; @@ -366,19 +419,30 @@ serial_0: serial@10a00000 { compatible = "google,gs101-uart"; reg = <0x10a00000 0xc0>; - reg-io-width = <4>; interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&dummy_clk 0>, <&dummy_clk 0>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>; clock-names = "uart", "clk_uart_baud0"; samsung,uart-fifosize = <256>; status = "disabled"; }; }; + cmu_peric1: clock-controller@10c00000 { + compatible = "google,gs101-cmu-peric1"; + reg = <0x10c00000 0x4000>; + #clock-cells = <1>; + clocks = <&ext_24_5m>, + <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>, + <&cmu_top CLK_DOUT_CMU_PERIC1_IP>; + clock-names = "oscclk", "bus", "ip"; + }; + sysreg_peric1: syscon@10c20000 { compatible = "google,gs101-peric1-sysreg", "syscon"; reg = <0x10c20000 0x10000>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>; }; pinctrl_peric1: pinctrl@10c40000 { @@ -387,6 +451,35 @@ interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>; }; + usi12: usi@10d500c0 { + compatible = "google,gs101-usi", + "samsung,exynos850-usi"; + reg = <0x10d500c0 0x20>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>, + <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>; + clock-names = "pclk", "ipclk"; + samsung,sysreg = <&sysreg_peric1 0x1010>; + status = "disabled"; + + hsi2c_12: i2c@10d50000 { + compatible = "google,gs101-hsi2c", + "samsung,exynosautov9-hsi2c"; + reg = <0x10d50000 0xc0>; + interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&hsi2c12_bus>; + pinctrl-names = "default"; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>, + <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; + pinctrl_hsi1: pinctrl@11840000 { compatible = "google,gs101-pinctrl"; reg = <0x11840000 0x00001000>; diff --git a/dts/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/src/arm64/freescale/fsl-ls1012a.dtsi index 1e3fe3897b..fe9093b3c0 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1012a.dtsi @@ -290,7 +290,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1012a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -351,24 +351,26 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; + scl-gpios = <&gpio0 2 0>; status = "disabled"; }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; + scl-gpios = <&gpio0 13 0>; status = "disabled"; }; @@ -499,6 +501,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; sata: sata@3200000 { @@ -550,6 +553,7 @@ <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index 1515cec231..754a64be73 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -485,7 +485,6 @@ <0x00030005 0x00000042>, <0x00030006 0x0000004c>, <0x00030007 0x00000056>; - big-endian; #thermal-sensor-cells = <1>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi index 8616d5e0c3..604bf88d70 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi @@ -591,6 +591,8 @@ reg = <0x00 0x03400000 0x0 0x00100000>, <0x20 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ + interrupt-names = "pme"; num-ib-windows = <24>; num-ob-windows = <256>; max-functions = /bits/ 8 <2>; @@ -628,6 +630,8 @@ reg = <0x00 0x03500000 0x0 0x00100000>, <0x28 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <6>; status = "disabled"; @@ -664,6 +668,8 @@ reg = <0x00 0x03600000 0x0 0x00100000>, <0x30 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <6>; status = "disabled"; diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index 6640b49670..e665c629e1 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -949,34 +949,50 @@ }; uart0: serial@21c0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21c0000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; uart1: serial@21d0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21d0000 0x0 0x1000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; uart2: serial@21e0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21e0000 0x0 0x1000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; uart3: serial@21f0000 { - compatible = "arm,sbsa-uart","arm,pl011"; + compatible = "arm,pl011", "arm,primecell"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; + clock-names = "uartclk", "apb_pclk"; reg = <0x0 0x21f0000 0x0 0x1000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8-apalis-eval-v1.1.dtsi b/dts/src/arm64/freescale/imx8-apalis-eval-v1.1.dtsi new file mode 100644 index 0000000000..0f77f78f4d --- /dev/null +++ b/dts/src/arm64/freescale/imx8-apalis-eval-v1.1.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +#include "imx8-apalis-eval.dtsi" + +/* Apalis CAN1 */ +&flexcan1 { + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8-apalis-eval-v1.2.dtsi b/dts/src/arm64/freescale/imx8-apalis-eval-v1.2.dtsi new file mode 100644 index 0000000000..f5c6a0164f --- /dev/null +++ b/dts/src/arm64/freescale/imx8-apalis-eval-v1.2.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +#include "imx8-apalis-eval.dtsi" + +/ { + reg_3v3_mmc: regulator-3v3-mmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_mmc>; + enable-active-high; + gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_MMC"; + startup-delay-us = <10000>; + }; + + reg_3v3_sd: regulator-3v3-sd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_sd>; + enable-active-high; + gpio = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SD"; + startup-delay-us = <10000>; + }; + + reg_can1: regulator-can1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + enable-active-high; + gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; + regulator-name = "5V_SW_CAN1"; + startup-delay-us = <10000>; + }; + + reg_can2: regulator-can2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can2_power>; + enable-active-high; + gpio = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + regulator-name = "5V_SW_CAN2"; + startup-delay-us = <10000>; + }; +}; + +/* Apalis CAN1 */ +&flexcan1 { + xceiver-supply = <®_can1>; + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + xceiver-supply = <®_can2>; + status = "okay"; +}; + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + /* Power/Current Measurement Sensor */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + }; +}; + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; + bus-width = <4>; + vmmc-supply = <®_3v3_mmc>; + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + vmmc-supply = <®_3v3_sd>; + status = "okay"; +}; + +&iomuxc { + + pinctrl_enable_3v3_mmc: enable3v3mmcgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19 0x00000021>; /* MXM3_148 */ + }; + + pinctrl_enable_3v3_sd: enable3v3sdgrp { + fsl,pins = <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x00000021>; /* MXM3_152 */ + }; + + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021>; /* MXM3_158 */ + }; + + pinctrl_enable_can2_power: enablecan2powergrp { + fsl,pins = <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021>; /* MXM3_156 */ + }; +}; diff --git a/dts/src/arm64/freescale/imx8-apalis-eval.dtsi b/dts/src/arm64/freescale/imx8-apalis-eval.dtsi index 685d4294f4..deecb96a15 100644 --- a/dts/src/arm64/freescale/imx8-apalis-eval.dtsi +++ b/dts/src/arm64/freescale/imx8-apalis-eval.dtsi @@ -35,18 +35,6 @@ status = "okay"; }; -/* Apalis CAN1 */ -&flexcan1 { - status = "okay"; -}; - -/* Apalis CAN2 */ -&flexcan2 { - status = "okay"; -}; - -/* TODO: GPU */ - /* Apalis I2C1 */ &i2c2 { status = "okay"; @@ -132,13 +120,3 @@ }; /* TODO: Apalis USBH4 SuperSpeed */ - -/* Apalis MMC1 */ -&usdhc2 { - status = "okay"; -}; - -/* Apalis SD1 */ -&usdhc3 { - status = "okay"; -}; diff --git a/dts/src/arm64/freescale/imx8-apalis-v1.1.dtsi b/dts/src/arm64/freescale/imx8-apalis-v1.1.dtsi index f69b0c1756..160153853b 100644 --- a/dts/src/arm64/freescale/imx8-apalis-v1.1.dtsi +++ b/dts/src/arm64/freescale/imx8-apalis-v1.1.dtsi @@ -261,7 +261,6 @@ reset-assert-us = <2>; reset-deassert-us = <2>; reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>; - reset-names = "phy"; }; }; }; diff --git a/dts/src/arm64/freescale/imx8-ss-audio.dtsi b/dts/src/arm64/freescale/imx8-ss-audio.dtsi index f057c6b21b..07afeb78ed 100644 --- a/dts/src/arm64/freescale/imx8-ss-audio.dtsi +++ b/dts/src/arm64/freescale/imx8-ss-audio.dtsi @@ -4,6 +4,7 @@ * Dong Aisheng <aisheng.dong@nxp.com> */ +#include <dt-bindings/clock/imx8-clock.h> #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> @@ -14,12 +15,174 @@ audio_ipg_clk: clock-audio-ipg { clock-output-names = "audio_ipg_clk"; }; +clk_ext_aud_mclk0: clock-ext-aud-mclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ext_aud_mclk0"; +}; + +clk_ext_aud_mclk1: clock-ext-aud-mclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ext_aud_mclk1"; +}; + +clk_esai0_rx_clk: clock-esai0-rx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_rx_clk"; +}; + +clk_esai0_rx_hf_clk: clock-esai0-rx-hf { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_rx_hf_clk"; +}; + +clk_esai0_tx_clk: clock-esai0-tx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_tx_clk"; +}; + +clk_esai0_tx_hf_clk: clock-esai0-tx-hf { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai0_tx_hf_clk"; +}; + +clk_spdif0_rx: clock-spdif0-rx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "spdif0_rx"; +}; + +clk_sai0_rx_bclk: clock-sai0-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai0_rx_bclk"; +}; + +clk_sai0_tx_bclk: clock-sai0-tx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai0_tx_bclk"; +}; + +clk_sai1_rx_bclk: clock-sai1-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai1_rx_bclk"; +}; + +clk_sai1_tx_bclk: clock-sai1-tx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai1_tx_bclk"; +}; + +clk_sai2_rx_bclk: clock-sai2-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai2_rx_bclk"; +}; + +clk_sai3_rx_bclk: clock-sai3-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai3_rx_bclk"; +}; + +clk_sai4_rx_bclk: clock-sai4-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai4_rx_bclk"; +}; + audio_subsys: bus@59000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x59000000 0x0 0x59000000 0x1000000>; + sai0: sai@59040000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59040000 0x10000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai0_lpcg 1>, + <&clk_dummy>, + <&sai0_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&edma0 12 0 1>, <&edma0 13 0 0>; + power-domains = <&pd IMX_SC_R_SAI_0>; + status = "disabled"; + }; + + sai1: sai@59050000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59050000 0x10000>; + interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai1_lpcg 1>, + <&clk_dummy>, + <&sai1_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&edma0 14 0 1>, <&edma0 15 0 0>; + power-domains = <&pd IMX_SC_R_SAI_1>; + status = "disabled"; + }; + + sai2: sai@59060000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59060000 0x10000>; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai2_lpcg 1>, + <&clk_dummy>, + <&sai2_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx"; + dmas = <&edma0 16 0 1>; + power-domains = <&pd IMX_SC_R_SAI_2>; + status = "disabled"; + }; + + sai3: sai@59070000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59070000 0x10000>; + interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai3_lpcg 1>, + <&clk_dummy>, + <&sai3_lpcg 0>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx"; + dmas = <&edma0 17 0 1>; + power-domains = <&pd IMX_SC_R_SAI_3>; + status = "disabled"; + }; + edma0: dma-controller@591f0000 { compatible = "fsl,imx8qm-edma"; reg = <0x591f0000 0x190000>; @@ -76,6 +239,54 @@ audio_subsys: bus@59000000 { <&pd IMX_SC_R_DMA_0_CH23>; }; + sai0_lpcg: clock-controller@59440000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59440000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI0_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai0_lpcg_mclk", + "sai0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_0>; + }; + + sai1_lpcg: clock-controller@59450000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59450000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI1_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai1_lpcg_mclk", + "sai1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_1>; + }; + + sai2_lpcg: clock-controller@59460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59460000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI2_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai2_lpcg_mclk", + "sai2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_2>; + }; + + sai3_lpcg: clock-controller@59470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59470000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI3_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "sai3_lpcg_mclk", + "sai3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_3>; + }; + dsp_lpcg: clock-controller@59580000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x59580000 0x10000>; @@ -151,4 +362,123 @@ audio_subsys: bus@59000000 { <&pd IMX_SC_R_DMA_1_CH9>, <&pd IMX_SC_R_DMA_1_CH10>; }; + + aud_rec0_lpcg: clock-controller@59d00000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d00000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_rec_clk0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>; + }; + + aud_rec1_lpcg: clock-controller@59d10000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d10000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_rec_clk1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>; + }; + + aud_pll_div0_lpcg: clock-controller@59d20000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d20000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_pll_div_clk0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>; + }; + + aud_pll_div1_lpcg: clock-controller@59d30000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d30000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "aud_pll_div_clk1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>; + }; + + mclkout0_lpcg: clock-controller@59d50000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d50000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_MCLKOUT0_SEL>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mclkout0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MCLK_OUT_0>; + }; + + mclkout1_lpcg: clock-controller@59d60000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59d60000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_MCLKOUT1_SEL>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mclkout1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MCLK_OUT_1>; + }; + + acm: acm@59e00000 { + compatible = "fsl,imx8qxp-acm"; + reg = <0x59e00000 0x1d0000>; + #clock-cells = <1>; + power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>, + <&pd IMX_SC_R_AUDIO_CLK_1>, + <&pd IMX_SC_R_MCLK_OUT_0>, + <&pd IMX_SC_R_MCLK_OUT_1>, + <&pd IMX_SC_R_AUDIO_PLL_0>, + <&pd IMX_SC_R_AUDIO_PLL_1>, + <&pd IMX_SC_R_ASRC_0>, + <&pd IMX_SC_R_ASRC_1>, + <&pd IMX_SC_R_ESAI_0>, + <&pd IMX_SC_R_SAI_0>, + <&pd IMX_SC_R_SAI_1>, + <&pd IMX_SC_R_SAI_2>, + <&pd IMX_SC_R_SAI_3>, + <&pd IMX_SC_R_SAI_4>, + <&pd IMX_SC_R_SAI_5>, + <&pd IMX_SC_R_SPDIF_0>, + <&pd IMX_SC_R_MQS_0>; + clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>, + <&aud_rec1_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&clk_ext_aud_mclk0>, + <&clk_ext_aud_mclk1>, + <&clk_esai0_rx_clk>, + <&clk_esai0_rx_hf_clk>, + <&clk_esai0_tx_clk>, + <&clk_esai0_tx_hf_clk>, + <&clk_spdif0_rx>, + <&clk_sai0_rx_bclk>, + <&clk_sai0_tx_bclk>, + <&clk_sai1_rx_bclk>, + <&clk_sai1_tx_bclk>, + <&clk_sai2_rx_bclk>, + <&clk_sai3_rx_bclk>, + <&clk_sai4_rx_bclk>; + clock-names = "aud_rec_clk0_lpcg_clk", + "aud_rec_clk1_lpcg_clk", + "aud_pll_div_clk0_lpcg_clk", + "aud_pll_div_clk1_lpcg_clk", + "ext_aud_mclk0", + "ext_aud_mclk1", + "esai0_rx_clk", + "esai0_rx_hf_clk", + "esai0_tx_clk", + "esai0_tx_hf_clk", + "spdif0_rx", + "sai0_rx_bclk", + "sai0_tx_bclk", + "sai1_rx_bclk", + "sai1_tx_bclk", + "sai2_rx_bclk", + "sai3_rx_bclk", + "sai4_rx_bclk"; + }; }; diff --git a/dts/src/arm64/freescale/imx8-ss-conn.dtsi b/dts/src/arm64/freescale/imx8-ss-conn.dtsi index 3c42240e78..4aaf5a0c1e 100644 --- a/dts/src/arm64/freescale/imx8-ss-conn.dtsi +++ b/dts/src/arm64/freescale/imx8-ss-conn.dtsi @@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; - clocks = <&usb2_lpcg 0>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_6>; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; rx-burst-size-dword = <0x10>; @@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 { usbphy1: usbphy@5b100000 { compatible = "fsl,imx7ulp-usbphy"; reg = <0x5b100000 0x1000>; - clocks = <&usb2_lpcg 1>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_7>; power-domains = <&pd IMX_SC_R_USB_0_PHY>; status = "disabled"; }; @@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>; + <&sdhc0_lpcg IMX_LPCG_CLK_5>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_0>; status = "disabled"; @@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b020000 0x10000>; clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, - <&sdhc1_lpcg IMX_LPCG_CLK_0>, - <&sdhc1_lpcg IMX_LPCG_CLK_5>; + <&sdhc1_lpcg IMX_LPCG_CLK_5>, + <&sdhc1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; @@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b030000 0x10000>; clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, - <&sdhc2_lpcg IMX_LPCG_CLK_0>, - <&sdhc2_lpcg IMX_LPCG_CLK_5>; + <&sdhc2_lpcg IMX_LPCG_CLK_5>, + <&sdhc2_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_2>; status = "disabled"; diff --git a/dts/src/arm64/freescale/imx8-ss-dma.dtsi b/dts/src/arm64/freescale/imx8-ss-dma.dtsi index b0bb77150a..f7a91d43a0 100644 --- a/dts/src/arm64/freescale/imx8-ss-dma.dtsi +++ b/dts/src/arm64/freescale/imx8-ss-dma.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/dma/fsl-edma.h> #include <dt-bindings/firmware/imx/rsrc.h> dma_ipg_clk: clock-dma-ipg { @@ -27,8 +28,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi0_lpcg 0>, - <&spi0_lpcg 1>; + clocks = <&spi0_lpcg IMX_LPCG_CLK_0>, + <&spi0_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -43,8 +44,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi1_lpcg 0>, - <&spi1_lpcg 1>; + clocks = <&spi1_lpcg IMX_LPCG_CLK_0>, + <&spi1_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -59,8 +60,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi2_lpcg 0>, - <&spi2_lpcg 1>; + clocks = <&spi2_lpcg IMX_LPCG_CLK_0>, + <&spi2_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -75,8 +76,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi3_lpcg 0>, - <&spi3_lpcg 1>; + clocks = <&spi3_lpcg IMX_LPCG_CLK_0>, + <&spi3_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -93,8 +94,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_0>; - dma-names = "tx","rx"; - dmas = <&edma2 9 0 0>, <&edma2 8 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>; status = "disabled"; }; @@ -107,8 +108,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_1>; - dma-names = "tx","rx"; - dmas = <&edma2 11 0 0>, <&edma2 10 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>; status = "disabled"; }; @@ -121,8 +122,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_2>; - dma-names = "tx","rx"; - dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>; status = "disabled"; }; @@ -135,8 +136,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_3>; - dma-names = "tx","rx"; - dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; + dma-names = "rx", "tx"; + dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>; status = "disabled"; }; @@ -144,8 +145,8 @@ dma_subsys: bus@5a000000 { compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; reg = <0x5a190000 0x1000>; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_pwm_lpcg 1>, - <&adma_pwm_lpcg 0>; + clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>, + <&adma_pwm_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; @@ -192,29 +193,6 @@ dma_subsys: bus@5a000000 { <&pd IMX_SC_R_DMA_2_CH15>; }; - edma3: dma-controller@5a9f0000 { - compatible = "fsl,imx8qm-edma"; - reg = <0x5a9f0000 0x90000>; - #dma-cells = <3>; - dma-channels = <8>; - interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd IMX_SC_R_DMA_3_CH0>, - <&pd IMX_SC_R_DMA_3_CH1>, - <&pd IMX_SC_R_DMA_3_CH2>, - <&pd IMX_SC_R_DMA_3_CH3>, - <&pd IMX_SC_R_DMA_3_CH4>, - <&pd IMX_SC_R_DMA_3_CH5>, - <&pd IMX_SC_R_DMA_3_CH6>, - <&pd IMX_SC_R_DMA_3_CH7>; - }; - spi0_lpcg: clock-controller@5a400000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5a400000 0x10000>; @@ -377,8 +355,8 @@ dma_subsys: bus@5a000000 { reg = <0x5a880000 0x10000>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adc0_lpcg 0>, - <&adc0_lpcg 1>; + clocks = <&adc0_lpcg IMX_LPCG_CLK_0>, + <&adc0_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; @@ -392,8 +370,8 @@ dma_subsys: bus@5a000000 { reg = <0x5a890000 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adc1_lpcg 0>, - <&adc1_lpcg 1>; + clocks = <&adc1_lpcg IMX_LPCG_CLK_0>, + <&adc1_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; @@ -406,8 +384,8 @@ dma_subsys: bus@5a000000 { reg = <0x5a8d0000 0x10000>; interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; @@ -427,8 +405,8 @@ dma_subsys: bus@5a000000 { * CAN1 shares CAN0's clock and to enable CAN0's clock it * has to be powered on. */ - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; @@ -448,8 +426,8 @@ dma_subsys: bus@5a000000 { * CAN2 shares CAN0's clock and to enable CAN0's clock it * has to be powered on. */ - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; @@ -460,6 +438,29 @@ dma_subsys: bus@5a000000 { status = "disabled"; }; + edma3: dma-controller@5a9f0000 { + compatible = "fsl,imx8qm-edma"; + reg = <0x5a9f0000 0x90000>; + #dma-cells = <3>; + dma-channels = <8>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_DMA_3_CH0>, + <&pd IMX_SC_R_DMA_3_CH1>, + <&pd IMX_SC_R_DMA_3_CH2>, + <&pd IMX_SC_R_DMA_3_CH3>, + <&pd IMX_SC_R_DMA_3_CH4>, + <&pd IMX_SC_R_DMA_3_CH5>, + <&pd IMX_SC_R_DMA_3_CH6>, + <&pd IMX_SC_R_DMA_3_CH7>; + }; + i2c0_lpcg: clock-controller@5ac00000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5ac00000 0x10000>; diff --git a/dts/src/arm64/freescale/imx8-ss-gpu0.dtsi b/dts/src/arm64/freescale/imx8-ss-gpu0.dtsi new file mode 100644 index 0000000000..9b8a44aa63 --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-gpu0.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/firmware/imx/rsrc.h> + +gpu0_subsys: bus@53000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x53000000 0x0 0x53000000 0x1000000>; + + gpu_3d0: gpu@53100000 { + compatible = "vivante,gc"; + reg = <0x53100000 0x40000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>; + clock-names = "core", "shader"; + assigned-clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>; + assigned-clock-rates = <700000000>, <850000000>; + power-domains = <&pd IMX_SC_R_GPU_0_PID0>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8-ss-lsio.dtsi index 7e510b21bb..764c1a08e3 100644 --- a/dts/src/arm64/freescale/imx8-ss-lsio.dtsi +++ b/dts/src/arm64/freescale/imx8-ss-lsio.dtsi @@ -25,8 +25,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d000000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm0_lpcg 4>, - <&pwm0_lpcg 1>; + clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>, + <&pwm0_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -38,8 +38,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d010000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm1_lpcg 4>, - <&pwm1_lpcg 1>; + clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, + <&pwm1_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -51,8 +51,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d020000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm2_lpcg 4>, - <&pwm2_lpcg 1>; + clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>, + <&pwm2_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -64,8 +64,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d030000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm3_lpcg 4>, - <&pwm3_lpcg 1>; + clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>, + <&pwm3_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; diff --git a/dts/src/arm64/freescale/imx8dxl-evk.dts b/dts/src/arm64/freescale/imx8dxl-evk.dts index b972658efb..2123d431e0 100644 --- a/dts/src/arm64/freescale/imx8dxl-evk.dts +++ b/dts/src/arm64/freescale/imx8dxl-evk.dts @@ -81,6 +81,24 @@ status = "disabled"; }; + reg_can0_stby: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "can0-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_3 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can1_stby: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "can1-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_3 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-3 { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -261,12 +279,81 @@ }; }; +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416_3: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&lsio_gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + }; + + pca9548_2: i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + }; +}; + &lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; status = "okay"; }; +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can0_stby>; + status = "okay"; +}; + +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + &lsio_gpio4 { status = "okay"; }; @@ -436,6 +523,20 @@ >; }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + IMX8DXL_UART2_TX_ADMA_FLEXCAN1_TX 0x00000021 + IMX8DXL_UART2_RX_ADMA_FLEXCAN1_RX 0x00000021 + >; + }; + + pinctrl_flexcan3: flexcan3grp { + fsl,pins = < + IMX8DXL_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x00000021 + IMX8DXL_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x00000021 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0 diff --git a/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi b/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi index 0a477f6318..5d012c9522 100644 --- a/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi +++ b/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi @@ -15,6 +15,63 @@ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; }; +&edma0 { + reg = <0x591f0000 0x1a0000>; + #dma-cells = <3>; + dma-channels = <25>; + dma-channel-mask = <0x1c0cc0>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */ + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */ + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */ + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */ + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */ + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */ + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */ + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */ + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */ + power-domains = <&pd IMX_SC_R_DMA_0_CH0>, + <&pd IMX_SC_R_DMA_0_CH1>, + <&pd IMX_SC_R_DMA_0_CH2>, + <&pd IMX_SC_R_DMA_0_CH3>, + <&pd IMX_SC_R_DMA_0_CH4>, + <&pd IMX_SC_R_DMA_0_CH5>, + <&pd IMX_SC_R_DMA_0_CH6>, + <&pd IMX_SC_R_DMA_0_CH7>, + <&pd IMX_SC_R_DMA_0_CH8>, + <&pd IMX_SC_R_DMA_0_CH9>, + <&pd IMX_SC_R_DMA_0_CH10>, + <&pd IMX_SC_R_DMA_0_CH11>, + <&pd IMX_SC_R_DMA_0_CH12>, + <&pd IMX_SC_R_DMA_0_CH13>, + <&pd IMX_SC_R_DMA_0_CH14>, + <&pd IMX_SC_R_DMA_0_CH15>, + <&pd IMX_SC_R_DMA_0_CH16>, + <&pd IMX_SC_R_DMA_0_CH17>, + <&pd IMX_SC_R_DMA_0_CH18>, + <&pd IMX_SC_R_DMA_0_CH19>, + <&pd IMX_SC_R_DMA_0_CH20>, + <&pd IMX_SC_R_DMA_0_CH21>, + <&pd IMX_SC_R_DMA_0_CH22>, + <&pd IMX_SC_R_DMA_0_CH23>, + <&pd IMX_SC_R_DMA_0_CH24>; +}; + &edma2 { interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, @@ -45,24 +102,44 @@ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>; }; +&flexcan1 { + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; +}; + +&flexcan2 { + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; +}; + +&flexcan3 { + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; +}; + &i2c0 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 1 0 0>, <&edma3 0 0 FSL_EDMA_RX>; }; &i2c1 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 3 0 0>, <&edma3 2 0 FSL_EDMA_RX>; }; &i2c2 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 5 0 0>, <&edma3 4 0 FSL_EDMA_RX>; }; &i2c3 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "tx","rx"; + dmas = <&edma3 7 0 0>, <&edma3 6 0 FSL_EDMA_RX>; }; &lpuart0 { diff --git a/dts/src/arm64/freescale/imx8dxl.dtsi b/dts/src/arm64/freescale/imx8dxl.dtsi index f580eb6db9..a0674c5c55 100644 --- a/dts/src/arm64/freescale/imx8dxl.dtsi +++ b/dts/src/arm64/freescale/imx8dxl.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/dma/fsl-edma.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/dts/src/arm64/freescale/imx8dxp-tqma8xdp-mba8xx.dts b/dts/src/arm64/freescale/imx8dxp-tqma8xdp-mba8xx.dts new file mode 100644 index 0000000000..f35514b7b3 --- /dev/null +++ b/dts/src/arm64/freescale/imx8dxp-tqma8xdp-mba8xx.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include "imx8dxp-tqma8xdp.dtsi" +#include "mba8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8DXP TQMa8XDP on MBa8Xx"; + compatible = "tq,imx8dxp-tqma8xdp-mba8xx", "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp"; +}; diff --git a/dts/src/arm64/freescale/imx8dxp-tqma8xdp.dtsi b/dts/src/arm64/freescale/imx8dxp-tqma8xdp.dtsi new file mode 100644 index 0000000000..e2de8517aa --- /dev/null +++ b/dts/src/arm64/freescale/imx8dxp-tqma8xdp.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "imx8dxp.dtsi" +#include "tqma8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8DXP TQMa8XDP"; + compatible = "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp"; +}; + +&pmic_thermal { + cooling-maps { + map0 { + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/dts/src/arm64/freescale/imx8dxp.dtsi b/dts/src/arm64/freescale/imx8dxp.dtsi new file mode 100644 index 0000000000..a8f7352332 --- /dev/null +++ b/dts/src/arm64/freescale/imx8dxp.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2019 NXP + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/delete-node/ &A35_2; +/delete-node/ &A35_3; + +&thermal_zones { + cpu0-thermal { + cooling-maps { + map0 { + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mm-evk.dtsi b/dts/src/arm64/freescale/imx8mm-evk.dtsi index b53104ed89..bd5b365867 100644 --- a/dts/src/arm64/freescale/imx8mm-evk.dtsi +++ b/dts/src/arm64/freescale/imx8mm-evk.dtsi @@ -151,6 +151,28 @@ clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; }; }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + link-name = "micfil hifi"; + format = "i2s"; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif1>; + spdif-out; + spdif-in; + }; }; &A53_0 { @@ -434,6 +456,16 @@ status = "okay"; }; +&micfil { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&clk IMX8MM_CLK_PDM>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <196608000>; + status = "okay"; +}; + &mipi_csi { status = "okay"; @@ -509,6 +541,24 @@ status = "okay"; }; +&spdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif1>; + assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>, + <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>; + clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", + "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", + "pll8k", "pll11k"; + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -636,6 +686,18 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 + MX8MM_IOMUXC_SAI5_RXC_PDM_CLK 0xd6 + MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0xd6 + MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0 0xd6 + MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1 0xd6 + MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0xd6 + MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3 0xd6 + >; + }; + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 @@ -666,6 +728,13 @@ >; }; + pinctrl_spdif1: spdif1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 + MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 + >; + }; + pinctrl_typec1: typec1grp { fsl,pins = < MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 diff --git a/dts/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts b/dts/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts index 8b16bd6857..33f8d7d197 100644 --- a/dts/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts +++ b/dts/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts @@ -25,23 +25,21 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_led>; led1 { label = "led1"; - gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; led2 { label = "led2"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; }; led3 { label = "led3"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; }; }; @@ -52,24 +50,12 @@ reg_rst_eth2: regulator-rst-eth2 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; regulator-name = "rst-usb-eth2"; }; - reg_usb1_vbus: regulator-usb1-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb1_vbus>; - gpio = <&gpio3 25 GPIO_ACTIVE_LOW>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "usb1-vbus"; - }; - reg_vdd_5v: regulator-5v { compatible = "regulator-fixed"; regulator-always-on; @@ -80,9 +66,6 @@ }; &ecspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; can@0 { @@ -91,7 +74,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can>; clocks = <&osc_can>; - interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>; /* * Limit the SPI clock to 15 MHz to prevent issues * with corrupted data due to chip errata. @@ -103,9 +86,6 @@ }; &ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; status = "okay"; eeram@0 { @@ -117,8 +97,8 @@ &fec1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii-rxid"; + pinctrl-0 = <&pinctrl_enet_rgmii>; + phy-connection-type = "rgmii-id"; phy-handle = <ðphy>; status = "okay"; @@ -127,55 +107,101 @@ #size-cells = <0>; ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-id4f51.e91b"; reg = <0>; - reset-assert-us = <1>; - reset-deassert-us = <15000>; - reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; }; }; +/* + * Rename SoM signals according to board usage: + * GPIO_B_0 -> DIO1_OUT + * GPIO_B_1 -> DIO2_OUT + */ &gpio1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio1>; - gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out", - "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; + gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1", + "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4", + "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT", + "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#", + "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3", + "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1", + "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)", + "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)", + "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0", + "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2", + "ETH_A_(R)(G)MII_RXD3"; }; -&gpio5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio5>; - gpio-line-names = "", "", "dio4-in", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; +/* + * Rename SoM signals according to board usage: + * GPIO_B_2 -> DIO3_OUT + * GPIO_B_3 -> DIO4_OUT + */ +&gpio3 { + gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5", + "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1", + "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1", + "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4", + "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT", + "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#", + "PCIe_WAKE#", "USB_A_EN"; }; -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; +/* + * Rename SoM signals according to board usage: + * GPIO_B_4 -> DIO1_IN + * GPIO_B_5 -> DIO2_IN + * GPIO_B_6 -> DIO3_IN + * GPIO_B_7 -> DIO4_IN + */ +&gpio4 { + gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN", + "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "", + "", "", "I2S_LRCLK", "I2S_BITCLK", + "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN", + "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6", + "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS", + "UART_A_RTS", "", "", "", + "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX"; +}; + +&i2c3 { status = "okay"; + + usb-hub@2c { + compatible = "microchip,usb2514b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + reg = <0x2c>; + non-removable-ports = <0>, <3>; + reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + }; }; &pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; }; +®_usb2_vbus { + status = "disabled"; +}; + +®_usdhc2_vcc { + status = "disabled"; +}; + +®_usdhc3_vcc { + status = "disabled"; +}; + &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; uart-has-rtscts; status = "okay"; }; &uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; linux,rs485-enabled-at-boot-time; uart-has-rtscts; status = "okay"; @@ -183,8 +209,6 @@ &usbotg1 { dr_mode = "otg"; - disable-over-current; - vbus-supply = <®_usb1_vbus>; status = "okay"; }; @@ -195,14 +219,17 @@ #size-cells = <0>; status = "okay"; + /* VBUS is controlled by the hub */ + /delete-property/ vbus-supply; + usb1@1 { - compatible = "usb424,9514"; + compatible = "usb424,2514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; usbnet: ethernet@1 { - compatible = "usb424,ec00"; + compatible = "usbb95,772b"; reg = <1>; local-mac-address = [ 00 00 00 00 00 00 ]; }; @@ -210,167 +237,20 @@ }; &usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; vmmc-supply = <®_vdd_3v3>; - vqmmc-supply = <®_nvcc_sd>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; status = "okay"; }; &iomuxc { pinctrl_can: cangrp { fsl,pins = < - MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 - MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 - MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 - MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 - MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 - MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19 /* PHY RST */ - MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* ETH IRQ */ - >; - }; - - pinctrl_gpio_led: gpioledgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 - MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 - MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x19 - >; - }; - - pinctrl_gpio1: gpio1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 - MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 - MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 - MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 - MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 - MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 - >; - }; - - pinctrl_gpio5: gpio5grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 - >; - }; - - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 - >; - }; - - pinctrl_reg_usb1_vbus: regusb1vbusgrp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 - >; - }; - - pinctrl_usb_eth2: usbeth2grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x19 /* SDIO_B_PWR_EN */ >; }; - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + pinctrl_usb_hub: usbhubgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 /* SDIO_B_WP */ >; }; }; diff --git a/dts/src/arm64/freescale/imx8mm-kontron-bl.dts b/dts/src/arm64/freescale/imx8mm-kontron-bl.dts index dcec57c203..aab8e24216 100644 --- a/dts/src/arm64/freescale/imx8mm-kontron-bl.dts +++ b/dts/src/arm64/freescale/imx8mm-kontron-bl.dts @@ -279,8 +279,8 @@ pinctrl_i2c4: i2c4grp { fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000083 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000083 >; }; @@ -292,19 +292,19 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0 >; }; @@ -316,40 +316,40 @@ pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; }; diff --git a/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi b/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi index 6e75ab879b..663ae52b48 100644 --- a/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi +++ b/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2022 Kontron Electronics GmbH */ +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "imx8mm.dtsi" @@ -28,6 +29,73 @@ chosen { stdout-path = &uart3; }; + + reg_vdd_carrier: regulator-vdd-carrier { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vdd_carrier>; + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + regulator-name = "VDD_CARRIER"; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + + regulator-state-disk { + regulator-off-in-suspend; + }; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_vbus>; + enable-active-high; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "VBUS_USB1"; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_vbus>; + enable-active-high; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "VBUS_USB2"; + }; + + reg_usdhc2_vcc: regulator-usdhc2-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>; + enable-active-high; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SDIO_A"; + }; + + reg_usdhc3_vcc: regulator-usdhc3-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>; + enable-active-high; + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SDIO_B"; + }; }; &A53_0 { @@ -96,6 +164,79 @@ }; }; +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_ecspi2_gpio>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1", + "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4", + "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "GPIO_B_0", + "GPIO_B_1", "USB_A_OC#", "CAM_MCK", "USB_B_OC#", + "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3", + "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1", + "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)", + "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)", + "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0", + "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2", + "ETH_A_(R)(G)MII_RXD3"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "SDIO_A_CD#", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0", + "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN", + "SDIO_A_WP"; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3>; + gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5", + "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1", + "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1", + "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4", + "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_2", + "USB_B_EN", "GPIO_B_3", "PCIe_CLKREQ#", "PCIe_A_PERST#", + "PCIe_WAKE#", "USB_A_EN"; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio4>; + gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN", + "GPIO_B_4", "BOOT_SEL0#", "BOOT_SEL1#", "", + "", "", "I2S_LRCLK", "I2S_BITCLK", + "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "GPIO_B_5", "GPIO_B_6", + "GPIO_B_7", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6", + "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS", + "UART_A_RTS", "", "", "", + "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX"; +}; + +&gpio5 { + gpio-line-names = "UART_B_TX", "SDIO_B_PWR_EN", "SDIO_B_WP", "PWM_2", + "PWM_1", "PWM_0", "", "", + "", "", "SPI_A_SCK", "SPI_A_SDO_(IO1)", + "SPI_A_SCK", "SPI_A_CS0#", "", "", + "I2C_A_SCL", "I2C_A_SDA", "I2C_B_SCL", "I2C_B_SDA", + "PCIe_SMCLK", "PCIe_SMDAT", "SPI_B_SCK", "SPI_B_SDO", + "SPI_B_SDI", "SPI_B_CS0#", "UART_CON_RX", "UART_CON_TX", + "UART_C_RX", "UART_C_TX"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -205,22 +346,86 @@ }; }; + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + address-width = <16>; + pagesize = <32>; + size = <8192>; + }; + rv3028: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc>; - interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>; - trickle-diode-disable; + interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>; }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + &uart3 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + vbus-supply = <®_usb1_vbus>; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + vbus-supply = <®_usb2_vbus>; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -233,6 +438,26 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vcc>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>; + vmmc-supply = <®_usdhc3_vcc>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -241,6 +466,12 @@ }; &iomuxc { + pinctrl_csi_mck: csimckgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59 /* CAM_MCK */ + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 @@ -250,10 +481,140 @@ >; }; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 /* SPI_A_SDI_(IO0) */ + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 /* SPI_A_SDO_(IO1) */ + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 /* SPI_A_SCK */ + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 /* SPI_A_CS0# */ + >; + }; + + pinctrl_ecspi2_gpio: ecspi2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 /* SPI_A_/WP_(IO2) */ + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* SPI_A_/HOLD_(IO3) */ + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 /* SPI_B_SDI */ + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 /* SPI_B_SDO */ + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 /* SPI_B_SCK */ + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 /* SPI_B_CS0# */ + >; + }; + + pinctrl_enet_rgmii: enetrgmiigrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03 /* ETH_MDC */ + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03 /* ETH_MDIO */ + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */ + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */ + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */ + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */ + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 /* ETH_A_(R)(G)MII_RXD3 */ + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 /* ETH_A_(R)(G)MII_RXD2 */ + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */ + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */ + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f /* ETH_A_(R)(G)MII_TX_CLK */ + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 /* ETH_A_(R)(G)MII_RX_CLK */ + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */ + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */ + >; + }; + + pinctrl_enet_rmii: enetrmiigrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03 /* ETH_MDC */ + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03 /* ETH_MDIO */ + MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x4000001f /* ETH_A_(S)(R)(G)MII_TXD2 */ + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x56 /* ETH_A_(S)(R)(G)MII_TXD1 */ + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x56 /* ETH_A_(S)(R)(G)MII_TXD0 */ + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x56 /* ETH_A_(S)(R)(G)MII_RXD1 */ + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x56 /* ETH_A_(S)(R)(G)MII_RXD0 */ + MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER 0x56 /* ETH_A_(R)(G)MII_RX_CLK */ + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x56 /* ETH_A_(R)(G)MII_RX_DV(_ER) */ + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x56 /* ETH_A_(R)(G)MII_TX_EN(_ER) */ + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19 /* GPIO_A_0 */ + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 /* GPIO_A_1 */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* GPIO_A_2 */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* GPIO_A_3 */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 /* GPIO_A_4 */ + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 /* GPIO_A_5 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 /* GPIO_A_6 */ + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* GPIO_A_7 */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* GPIO_B_0 */ + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 /* GPIO_B_1 */ + >; + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 /* GPIO_C_5 */ + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x19 /* GPIO_C_4 */ + MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x19 /* GPIO_C_0 */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 /* GPIO_C_1 */ + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 /* GPIO_C_2 */ + MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* GPIO_C_3 */ + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19 /* GPIO_B_2 */ + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 /* GPIO_B_3 */ + >; + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 /* GPIO_C_7 */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x19 /* GPIO_B_4 */ + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x19 /* BOOT_SEL0# */ + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x19 /* BOOT_SEL1# */ + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 /* GPIO_B_5 */ + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 /* GPIO_B_6 */ + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19 /* GPIO_B_7 */ + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* GPIO_C_6 */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000083 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000083 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083 /* I2C_A_SCL */ + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083 /* I2C_A_SDA */ + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000083 /* I2C_B_SCL */ + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000083 /* I2C_B_SDA */ + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000083 /* PCIe_SMCLK and I2C_CAM_SCL/CSI_TX_P */ + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000083 /* PCIe_SMDAT and I2C_CAM_SDA/CSI_TX_N */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 /* PCIe_CLKREQ# */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 /* PCIe_A_PERST# */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19 /* PCIe_WAKE# */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 /* PCIe_SM_ALERT */ >; }; @@ -263,16 +624,113 @@ >; }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x19 /* PWM_0 */ + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 /* PWM_1 */ + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x19 /* PWM_2 */ + >; + }; + + pinctrl_reg_usb1_vbus: regusb1vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 /* USB_A_EN */ + >; + }; + + pinctrl_reg_usb2_vbus: regusb2vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 /* USB_B_EN */ + >; + }; + + pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x19 /* SDIO_A_PWR_EN */ + >; + }; + + pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x19 /* SDIO_B_PWR_EN */ + >; + }; + + pinctrl_reg_vdd_carrier: regvddcarriergrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* CARRIER_PWR_EN */ + >; + }; + pinctrl_rtc: rtcgrp { fsl,pins = < MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0xd6 /* I2S_A_DATA_IN */ + MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 /* I2S_A_DATA_OUT */ + MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1 0xd6 /* I2S_B_DATA_IN */ + MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1 0xd6 /* I2S_B_DATA_OUT */ + MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0xd6 /* I2S_MCLK */ + MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 /* I2S_LRCLK */ + MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 /* I2S_BITCLK */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0 /* UART_A_RX */ + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0 /* UART_A_TX */ + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0 /* UART_A_CTS */ + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0 /* UART_A_RTS */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0 /* UART_B_RX */ + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0 /* UART_B_TX */ + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0 /* UART_B_CTS */ + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0 /* UART_B_RTS */ + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 - MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 /* UART_CON_RX */ + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 /* UART_CON_TX */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x0 /* UART_C_RX */ + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x0 /* UART_C_TX */ + >; + }; + + pinctrl_usb1: usb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19 /* USB_A_OC# */ + >; + }; + + pinctrl_usb2: usb2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x19 /* USB_B_OC# */ >; }; @@ -327,6 +785,103 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 /* SDIO_A_CLK */ + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 /* SDIO_A_CMD */ + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 /* SDIO_A_D0 */ + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 /* SDIO_A_D1 */ + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */ + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */ + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 /* SDIO_A_CLK */ + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 /* SDIO_A_CMD */ + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 /* SDIO_A_D0 */ + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 /* SDIO_A_D1 */ + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */ + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */ + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 /* SDIO_A_CLK */ + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 /* SDIO_A_CMD */ + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 /* SDIO_A_D0 */ + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 /* SDIO_A_D1 */ + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */ + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */ + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 /* SDIO_A_CD# */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x90 /* SDIO_B_CLK */ + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x90 /* SDIO_B_CMD */ + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x90 /* SDIO_B_D0 */ + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x90 /* SDIO_B_D1 */ + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x90 /* SDIO_B_D2 */ + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x90 /* SDIO_B_D3 */ + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x90 /* SDIO_B_D4 */ + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x90 /* SDIO_B_D5 */ + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x90 /* SDIO_B_D6 */ + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x90 /* SDIO_B_D7 */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x94 /* SDIO_B_CLK */ + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x94 /* SDIO_B_CMD */ + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x94 /* SDIO_B_D0 */ + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x94 /* SDIO_B_D1 */ + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x94 /* SDIO_B_D2 */ + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x94 /* SDIO_B_D3 */ + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x94 /* SDIO_B_D4 */ + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x94 /* SDIO_B_D5 */ + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x94 /* SDIO_B_D6 */ + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x94 /* SDIO_B_D7 */ + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x96 /* SDIO_B_CLK */ + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x96 /* SDIO_B_CMD */ + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x96 /* SDIO_B_D0 */ + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x96 /* SDIO_B_D1 */ + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x96 /* SDIO_B_D2 */ + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x96 /* SDIO_B_D3 */ + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x96 /* SDIO_B_D4 */ + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x96 /* SDIO_B_D5 */ + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x96 /* SDIO_B_D6 */ + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x96 /* SDIO_B_D7 */ + >; + }; + + pinctrl_usdhc3_gpio: usdhc3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* SDIO_B_CD# */ + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 /* SDIO_B_WP */ + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 diff --git a/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi b/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi index 1f8326613e..2076148e08 100644 --- a/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi +++ b/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi @@ -237,8 +237,8 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000083 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000083 >; }; diff --git a/dts/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts b/dts/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts index ea6e8b8516..01b632b220 100644 --- a/dts/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/dts/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> + #include "imx8mm-tqma8mqml.dtsi" #include "mba8mx.dtsi" @@ -74,19 +76,23 @@ }; &pcie_phy { - clocks = <&pcie0_refclk>; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcieclk 2>; + clock-names = "ref"; status = "okay"; }; +/* PCIe slot on X36 */ &pcie0 { reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 3>, <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_PCIE1_CTRL>; + <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, - <&clk IMX8MM_SYS_PLL2_250M>; + <&clk IMX8MM_SYS_PLL2_250M>; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi b/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi index 6425773f68..41c966147b 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi +++ b/dts/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi @@ -47,25 +47,20 @@ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; - - reg_usb_otg1_vbus: regulator-usb-otg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb1_en>; - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; }; -/* off-board header */ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio1 { @@ -144,9 +139,10 @@ }; &usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; dr_mode = "otg"; over-current-active-low; - vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; @@ -204,20 +200,13 @@ >; }; - pinctrl_reg_usb1_en: regusb1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41 - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 - MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 - >; - }; - pinctrl_spi2: spi2grp { fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6 >; }; @@ -234,4 +223,11 @@ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 >; }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; }; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts index 87b80e2412..5e2cbaf27e 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts +++ b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts @@ -285,7 +285,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, + <&gpio4 24 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { @@ -294,6 +295,12 @@ spi-max-frequency = <40000000>; status = "okay"; }; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &fec1 { @@ -319,7 +326,7 @@ &gpio4 { gpio-line-names = "", "", "", "", - "", "", "uart3_rs232#", "uart3_rs422#", + "dig1_ctl", "dig2_ctl", "uart3_rs232#", "uart3_rs422#", "uart3_rs485#", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", ""; @@ -842,6 +849,8 @@ pinctrl_hog: hoggrp { fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIG1_CTL */ + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000041 /* DIG2_CTL */ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */ @@ -987,6 +996,7 @@ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140 >; }; diff --git a/dts/src/arm64/freescale/imx8mn-beacon-kit.dts b/dts/src/arm64/freescale/imx8mn-beacon-kit.dts index 35b8d2060c..bbd80896db 100644 --- a/dts/src/arm64/freescale/imx8mn-beacon-kit.dts +++ b/dts/src/arm64/freescale/imx8mn-beacon-kit.dts @@ -99,8 +99,6 @@ }; &lcdif { - assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>; - assigned-clock-rates = <594000000>; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mn-evk.dtsi b/dts/src/arm64/freescale/imx8mn-evk.dtsi index a0e13d3324..269e70f66a 100644 --- a/dts/src/arm64/freescale/imx8mn-evk.dtsi +++ b/dts/src/arm64/freescale/imx8mn-evk.dtsi @@ -110,6 +110,20 @@ spdif-out; spdif-in; }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + link-name = "micfil hifi"; + format = "i2s"; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; }; &easrc { @@ -285,6 +299,16 @@ status = "okay"; }; +&micfil { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&clk IMX8MN_CLK_PDM>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <196608000>; + status = "okay"; +}; + &mipi_csi { status = "okay"; @@ -522,6 +546,18 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 + MX8MN_IOMUXC_SAI5_RXC_PDM_CLK 0xd6 + MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0xd6 + MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0 0xd6 + MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1 0xd6 + MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2 0xd6 + MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3 0xd6 + >; + }; + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 diff --git a/dts/src/arm64/freescale/imx8mn-rve-gateway.dts b/dts/src/arm64/freescale/imx8mn-rve-gateway.dts index 1b633bd1eb..ea1855171f 100644 --- a/dts/src/arm64/freescale/imx8mn-rve-gateway.dts +++ b/dts/src/arm64/freescale/imx8mn-rve-gateway.dts @@ -10,7 +10,7 @@ / { model = "RVE gateway"; - compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn"; + compatible = "rve,gateway", "variscite,var-som-mx8mn", "fsl,imx8mn"; crystal_duart_24m: crystal-duart-24m { compatible = "fixed-clock"; diff --git a/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso b/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso new file mode 100644 index 0000000000..96db07fc9b --- /dev/null +++ b/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mn-pinfunc.h" + +&{/} { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X19"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_connector>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; +}; + +&rst_usb_hub_hog { + output-low; +}; + +&sel_usb_hub_hog { + output-low; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + power-active-high; + /delete-property/ disable-over-current; + over-current-active-low; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; +}; + +&iomuxc { + pinctrl_usb1_connector: usb1-connectorgrp { + fsl,pins = <MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts index c07d59147a..433d8bba44 100644 --- a/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts +++ b/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts @@ -41,7 +41,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0hub_sel>; - sel-usb-hub-hog { + sel_usb_hub_hog: sel-usb-hub-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; output-high; @@ -198,8 +198,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84>, - <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>, - <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x1C4>; + <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>; }; pinctrl_usdhc2: usdhc2grp { diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi index 136e75c512..932c8b05c7 100644 --- a/dts/src/arm64/freescale/imx8mn.dtsi +++ b/dts/src/arm64/freescale/imx8mn.dtsi @@ -1168,7 +1168,7 @@ <&clk IMX8MN_SYS_PLL1_800M>; assigned-clock-rates = <266000000>, <24000000>, - <594000000>, + <24000000>, <500000000>, <200000000>; #power-domain-cells = <1>; diff --git a/dts/src/arm64/freescale/imx8mp-beacon-som.dtsi b/dts/src/arm64/freescale/imx8mp-beacon-som.dtsi index e5da908047..8be251b693 100644 --- a/dts/src/arm64/freescale/imx8mp-beacon-som.dtsi +++ b/dts/src/arm64/freescale/imx8mp-beacon-som.dtsi @@ -50,6 +50,8 @@ phy-mode = "rgmii-id"; phy-handle = <ðphy0>; snps,force_thresh_dma_mode; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; status = "okay"; mdio { @@ -66,6 +68,71 @@ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; }; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + snps,map-to-dma-channel = <4>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + }; + }; }; &flexspi { @@ -206,6 +273,10 @@ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "nxp,88w8997-bt"; + }; }; &usdhc1 { diff --git a/dts/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts b/dts/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts index 5828c9d782..7e1b58dbe2 100644 --- a/dts/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts +++ b/dts/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/net/qca-ar803x.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mp.dtsi" / { @@ -45,6 +46,19 @@ clock-frequency = <25000000>; }; + clk_pwm4: clock-pwm4 { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + clock-output-names = "codec-pwm4"; + /* + * 1 / 83 ns ~= 12 MHz , but since the PWM input clock is 24 MHz + * and the calculated PWM period is 1 and duty cycle is 50%, the + * result is exactly 12 MHz, which is fine for SGTL5000 MCLK. + */ + pwms = <&pwm4 0 83 0>; + }; + panel: panel { /* Compatible string is filled in by panel board DT Overlay. */ backlight = <&backlight>; @@ -82,6 +96,24 @@ vin-supply = <&buck4>; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SGTL5000-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; + watchdog { /* TPS3813 */ compatible = "linux,wdt-gpio"; pinctrl-names = "default"; @@ -121,7 +153,7 @@ flash@0 { /* W25Q128JVEI */ compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <100000000>; /* Up to 133 MHz */ + spi-max-frequency = <40000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; }; @@ -288,6 +320,15 @@ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_pwm4>; + VDDA-supply = <&buck4>; + VDDIO-supply = <&buck4>; + }; + usb-hub@2c { compatible = "microchip,usb2514bi"; reg = <0x2c>; @@ -429,6 +470,21 @@ status = "okay"; }; +&pcie_phy { + clocks = <&pcieclk 0>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + fsl,max-link-speed = <3>; + reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_panel_pwm>; @@ -436,6 +492,23 @@ status = "disabled"; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&sai3 { + #clock-cells = <0>; + #sound-dai-cells = <0>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + status = "okay"; +}; + /* SD slot */ &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -785,6 +858,12 @@ >; }; + pinctrl_pwm4: pwm4-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0xd6 + >; + }; + pinctrl_rtc: rtc-grp { fsl,pins = < /* RTC_IRQ# */ @@ -816,7 +895,6 @@ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 - MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 >; }; diff --git a/dts/src/arm64/freescale/imx8mp-evk.dts b/dts/src/arm64/freescale/imx8mp-evk.dts index f87fa5a948..9beba8d6a0 100644 --- a/dts/src/arm64/freescale/imx8mp-evk.dts +++ b/dts/src/arm64/freescale/imx8mp-evk.dts @@ -23,7 +23,7 @@ port { hdmi_connector_in: endpoint { - remote-endpoint = <&adv7533_out>; + remote-endpoint = <&adv7535_out>; }; }; }; @@ -107,6 +107,13 @@ enable-active-high; }; + reg_vext_3v3: regulator-vext-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VEXT_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "wm8960-audio"; @@ -364,7 +371,7 @@ regulator-always-on; }; - BUCK5 { + reg_buck5: BUCK5 { regulator-name = "BUCK5"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1950000>; @@ -415,14 +422,16 @@ hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; + avdd-supply = <®_buck5>; + dvdd-supply = <®_buck5>; + pvdd-supply = <®_buck5>; + a2vdd-supply = <®_buck5>; + v3p3-supply = <®_vext_3v3>; + v1p2-supply = <®_buck5>; ports { #address-cells = <1>; @@ -431,7 +440,7 @@ port@0 { reg = <0>; - adv7533_in: endpoint { + adv7535_in: endpoint { remote-endpoint = <&dsi_out>; }; }; @@ -439,7 +448,7 @@ port@1 { reg = <1>; - adv7533_out: endpoint { + adv7535_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; @@ -524,7 +533,7 @@ reg = <1>; dsi_out: endpoint { - remote-endpoint = <&adv7533_in>; + remote-endpoint = <&adv7535_in>; data-lanes = <1 2 3 4>; }; }; diff --git a/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts b/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts index c8640cac3e..00a240484c 100644 --- a/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -19,6 +19,30 @@ stdout-path = &uart1; }; + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds1>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <11>; + enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + num-interpolated-steps = <2>; + power-supply = <®_lvds1_reg_en>; + pwms = <&pwm3 0 50000 0>; + }; + + panel1_lvds: panel-lvds { + compatible = "edt,etml1010g3dra"; + backlight = <&backlight_lvds>; + power-supply = <®_vcc_3v3_sw>; + + port { + panel1_in: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -39,6 +63,15 @@ regulator-name = "can2-stby"; }; + reg_lvds1_reg_en: regulator-lvds1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "lvds1_reg_en"; + }; + reg_usb1_vbus: regulator-usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -61,6 +94,13 @@ startup-delay-us = <100>; off-on-delay-us = <12000>; }; + + reg_vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &eqos { @@ -135,10 +175,41 @@ }; }; +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + status = "okay"; + + ports { + port@2 { + ldb_lvds_ch1: endpoint { + remote-endpoint = <&panel1_in>; + }; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; +&pwm3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&rv3028 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + trickle-resistor-ohms = <3000>; +}; + /* debug console */ &uart1 { pinctrl-names = "default"; @@ -239,12 +310,12 @@ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 - MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 - MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 - MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 - MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 - MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x12 MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 >; }; @@ -289,16 +360,34 @@ >; }; + pinctrl_lvds1: lvds1grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x12 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 >; }; + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x1C0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < - MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40 - MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40 + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 >; }; @@ -319,7 +408,7 @@ pinctrl_usdhc2_pins: usdhc2-gpiogrp { fsl,pins = < - MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40 >; }; diff --git a/dts/src/arm64/freescale/imx8mp-phycore-som.dtsi b/dts/src/arm64/freescale/imx8mp-phycore-som.dtsi index c976c3b6cb..e6ffa6a6b6 100644 --- a/dts/src/arm64/freescale/imx8mp-phycore-som.dtsi +++ b/dts/src/arm64/freescale/imx8mp-phycore-som.dtsi @@ -175,7 +175,6 @@ rv3028: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; - trickle-resistor-ohms = <3000>; }; }; diff --git a/dts/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi b/dts/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi index 0e8d0f3c7e..e7bf032265 100644 --- a/dts/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi +++ b/dts/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi @@ -63,8 +63,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio4 { @@ -228,6 +235,7 @@ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140 MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140 MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 >; }; diff --git a/dts/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi b/dts/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi index 41c79d2ebd..f24b147447 100644 --- a/dts/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi +++ b/dts/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi @@ -14,6 +14,7 @@ pinctrl-0 = <&pinctrl_usbcon1>; type = "micro"; label = "otg"; + vbus-supply = <®_usb1_vbus>; id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; port { @@ -183,7 +184,6 @@ }; &usb3_phy0 { - vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi b/dts/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi index d5c400b355..f5491a608b 100644 --- a/dts/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi +++ b/dts/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi @@ -14,6 +14,7 @@ pinctrl-0 = <&pinctrl_usbcon1>; type = "micro"; label = "otg"; + vbus-supply = <®_usb1_vbus>; id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; port { @@ -202,7 +203,6 @@ }; &usb3_phy0 { - vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mp-verdin.dtsi b/dts/src/arm64/freescale/imx8mp-verdin.dtsi index c3305f0d40..faa17cbbe2 100644 --- a/dts/src/arm64/freescale/imx8mp-verdin.dtsi +++ b/dts/src/arm64/freescale/imx8mp-verdin.dtsi @@ -552,7 +552,7 @@ regulator-name = "On-module +V3.3_ADC (LDO4)"; }; - LDO5 { + reg_vdd_sdio: LDO5 { regulator-max-microvolt = <3300000>; regulator-min-microvolt = <1800000>; regulator-name = "On-module +V3.3_1.8_SD (LDO5)"; @@ -885,6 +885,7 @@ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_vdd_sdio>; }; /* On-module eMMC */ diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi index 39a550c1cd..bfc5c81a5b 100644 --- a/dts/src/arm64/freescale/imx8mp.dtsi +++ b/dts/src/arm64/freescale/imx8mp.dtsi @@ -1636,8 +1636,10 @@ <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pclk", "wrap", "phy", "axi"; - assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_CLK_24M>; assigned-clock-rates = <500000000>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; status = "disabled"; @@ -1670,8 +1672,10 @@ <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pclk", "wrap", "phy", "axi"; - assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_CLK_24M>; assigned-clock-rates = <266000000>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; status = "disabled"; diff --git a/dts/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts b/dts/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts index b302daca4c..0165f3a259 100644 --- a/dts/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/dts/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -28,18 +28,6 @@ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - pcie0_refclk: pcie0-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - pcie1_refclk: pcie1-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - reg_otg_vbus: regulator-otg-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -103,23 +91,24 @@ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; }; +/* PCIe slot on X36 */ &pcie0 { reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, - <&pcie0_refclk>, - <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcieclk 3>, + <&pcieclk 2>, <&clk IMX8MQ_CLK_PCIE1_AUX>; status = "okay"; }; /* - * miniPCIe, also usable for cards with USB. Therefore configure the reset as + * miniPCIe on X28, also usable for cards with USB. Therefore configure the reset as * static gpio hog. */ &pcie1 { clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&pcie1_refclk>, - <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcieclk 1>, + <&pcieclk 0>, <&clk IMX8MQ_CLK_PCIE2_AUX>; status = "okay"; }; @@ -171,6 +160,7 @@ }; &usb3_phy1 { + vbus-supply = <®_hub_vbus>; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8qm-apalis-eval-v1.2.dts b/dts/src/arm64/freescale/imx8qm-apalis-eval-v1.2.dts new file mode 100644 index 0000000000..8466a8204e --- /dev/null +++ b/dts/src/arm64/freescale/imx8qm-apalis-eval-v1.2.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis.dtsi" +#include "imx8-apalis-eval-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board V1.2"; + compatible = "toradex,apalis-imx8-eval-v1.2", + "toradex,apalis-imx8", + "fsl,imx8qm"; +}; diff --git a/dts/src/arm64/freescale/imx8qm-apalis-eval.dts b/dts/src/arm64/freescale/imx8qm-apalis-eval.dts index 5ab0921eb5..b0ebf6d054 100644 --- a/dts/src/arm64/freescale/imx8qm-apalis-eval.dts +++ b/dts/src/arm64/freescale/imx8qm-apalis-eval.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "imx8qm-apalis.dtsi" -#include "imx8-apalis-eval.dtsi" +#include "imx8-apalis-eval-v1.1.dtsi" / { model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board"; diff --git a/dts/src/arm64/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts b/dts/src/arm64/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts new file mode 100644 index 0000000000..92c0ae0c03 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-eval-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board V1.2"; + compatible = "toradex,apalis-imx8-v1.1-eval-v1.2", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + /delete-property/ no-1-8-v; +}; + +/* Apalis SD1 */ +&usdhc3 { + /delete-property/ no-1-8-v; +}; diff --git a/dts/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts b/dts/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts index c8ff758315..c998e542f9 100644 --- a/dts/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts +++ b/dts/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "imx8qm-apalis-v1.1.dtsi" -#include "imx8-apalis-eval.dtsi" +#include "imx8-apalis-eval-v1.1.dtsi" / { model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board"; diff --git a/dts/src/arm64/freescale/imx8qm-mek.dts b/dts/src/arm64/freescale/imx8qm-mek.dts index 6d50838ad1..77ac0efdfa 100644 --- a/dts/src/arm64/freescale/imx8qm-mek.dts +++ b/dts/src/arm64/freescale/imx8qm-mek.dts @@ -41,6 +41,18 @@ }; }; +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + &lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; @@ -104,6 +116,20 @@ }; &iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c + IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x0600004c + >; + }; + + pinctrl_i2c1_gpio: i2c1gpio-grp { + fsl,pins = < + IMX8QM_GPT0_CLK_LSIO_GPIO0_IO14 0xc600004c + IMX8QM_GPT0_CAPTURE_LSIO_GPIO0_IO15 0xc600004c + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020 diff --git a/dts/src/arm64/freescale/imx8qm-ss-conn.dtsi b/dts/src/arm64/freescale/imx8qm-ss-conn.dtsi index ec1639174e..545e175c88 100644 --- a/dts/src/arm64/freescale/imx8qm-ss-conn.dtsi +++ b/dts/src/arm64/freescale/imx8qm-ss-conn.dtsi @@ -6,20 +6,25 @@ &fec1 { compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; + iommus = <&smmu 0x12 0x7f80>; }; &fec2 { compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; + iommus = <&smmu 0x12 0x7f80>; }; &usdhc1 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; &usdhc2 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; &usdhc3 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; diff --git a/dts/src/arm64/freescale/imx8qm-ss-dma.dtsi b/dts/src/arm64/freescale/imx8qm-ss-dma.dtsi index 69cb867673..aa9f28c443 100644 --- a/dts/src/arm64/freescale/imx8qm-ss-dma.dtsi +++ b/dts/src/arm64/freescale/imx8qm-ss-dma.dtsi @@ -17,6 +17,32 @@ power-domains = <&pd IMX_SC_R_UART_4>; }; + i2c4: i2c@5a840000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a840000 0x4000>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&i2c4_lpcg 0>, + <&i2c4_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_4>; + status = "disabled"; + }; + + i2c4_lpcg: clock-controller@5ac40000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac40000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c4_lpcg_clk", + "i2c4_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_4>; + }; + can1_lpcg: clock-controller@5ace0000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5ace0000 0x10000>; @@ -96,15 +122,30 @@ status = "okay"; }; +/* It is eDMA1 in 8QM RM, but 8QXP it is eDMA3 */ &edma3 { + reg = <0x5a9f0000 0x210000>; + dma-channels = <10>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_1_CH0>, - <&pd IMX_SC_R_DMA_1_CH1>, - <&pd IMX_SC_R_DMA_1_CH2>, - <&pd IMX_SC_R_DMA_1_CH3>, - <&pd IMX_SC_R_DMA_1_CH4>, - <&pd IMX_SC_R_DMA_1_CH5>, - <&pd IMX_SC_R_DMA_1_CH6>, - <&pd IMX_SC_R_DMA_1_CH7>; + <&pd IMX_SC_R_DMA_1_CH1>, + <&pd IMX_SC_R_DMA_1_CH2>, + <&pd IMX_SC_R_DMA_1_CH3>, + <&pd IMX_SC_R_DMA_1_CH4>, + <&pd IMX_SC_R_DMA_1_CH5>, + <&pd IMX_SC_R_DMA_1_CH6>, + <&pd IMX_SC_R_DMA_1_CH7>, + <&pd IMX_SC_R_DMA_1_CH8>, + <&pd IMX_SC_R_DMA_1_CH9>; }; &flexcan1 { @@ -112,15 +153,15 @@ }; &flexcan2 { - clocks = <&can1_lpcg 1>, - <&can1_lpcg 0>; + clocks = <&can1_lpcg IMX_LPCG_CLK_4>, + <&can1_lpcg IMX_LPCG_CLK_0>; assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>; fsl,clk-source = /bits/ 8 <1>; }; &flexcan3 { - clocks = <&can2_lpcg 1>, - <&can2_lpcg 0>; + clocks = <&can2_lpcg IMX_LPCG_CLK_4>, + <&can2_lpcg IMX_LPCG_CLK_0>; assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>; fsl,clk-source = /bits/ 8 <1>; }; diff --git a/dts/src/arm64/freescale/imx8qm.dtsi b/dts/src/arm64/freescale/imx8qm.dtsi index 31744fc1ab..b3d01677b7 100644 --- a/dts/src/arm64/freescale/imx8qm.dtsi +++ b/dts/src/arm64/freescale/imx8qm.dtsi @@ -265,6 +265,47 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ }; + smmu: iommu@51400000 { + compatible = "arm,mmu-500"; + interrupt-parent = <&gic>; + reg = <0 0x51400000 0 0x40000>; + #global-interrupts = <1>; + #iommu-cells = <2>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + system-controller { compatible = "fsl,imx-scu"; mbox-names = "tx0", diff --git a/dts/src/arm64/freescale/imx8qxp-tqma8xqp-mba8xx.dts b/dts/src/arm64/freescale/imx8qxp-tqma8xqp-mba8xx.dts new file mode 100644 index 0000000000..7d2e98bf8b --- /dev/null +++ b/dts/src/arm64/freescale/imx8qxp-tqma8xqp-mba8xx.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include "imx8qxp-tqma8xqp.dtsi" +#include "mba8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8QXP TQMa8XQP on MBa8Xx"; + compatible = "tq,imx8qxp-tqma8xqp-mba8xx", "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp"; +}; diff --git a/dts/src/arm64/freescale/imx8qxp-tqma8xqp.dtsi b/dts/src/arm64/freescale/imx8qxp-tqma8xqp.dtsi new file mode 100644 index 0000000000..b14040bf4d --- /dev/null +++ b/dts/src/arm64/freescale/imx8qxp-tqma8xqp.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "imx8qxp.dtsi" +#include "tqma8xx.dtsi" + +/ { + model = "TQ-Systems i.MX8QXP TQMa8XQP"; + compatible = "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp"; +}; diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index 958267b333..10e16d84c0 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -260,6 +260,13 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ }; + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; + xtal32k: clock-xtal32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -310,6 +317,7 @@ /* sorted in register address */ #include "imx8-ss-img.dtsi" #include "imx8-ss-vpu.dtsi" + #include "imx8-ss-gpu0.dtsi" #include "imx8-ss-adma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" diff --git a/dts/src/arm64/freescale/imx8ulp-evk.dts b/dts/src/arm64/freescale/imx8ulp-evk.dts index 69dd8e3102..24bb253b93 100644 --- a/dts/src/arm64/freescale/imx8ulp-evk.dts +++ b/dts/src/arm64/freescale/imx8ulp-evk.dts @@ -37,7 +37,7 @@ no-map; }; - rsc_table: rsc-table@1fff8000{ + rsc_table: rsc-table@1fff8000 { reg = <0 0x1fff8000 0 0x1000>; no-map; }; diff --git a/dts/src/arm64/freescale/imx93-phyboard-segin.dts b/dts/src/arm64/freescale/imx93-phyboard-segin.dts new file mode 100644 index 0000000000..85fb188b05 --- /dev/null +++ b/dts/src/arm64/freescale/imx93-phyboard-segin.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com> + * + * Product homepage: + * phyBOARD-Segin carrier board is reused for the i.MX93 design. + * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + */ +/dts-v1/; + +#include "imx93-phycore-som.dtsi" + +/{ + model = "PHYTEC phyBOARD-Segin-i.MX93"; + compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som", + "fsl,imx93"; + + chosen { + stdout-path = &lpuart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SD"; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + no-1-8-v; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + bus-width = <4>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x30e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2_default: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x178e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx93-phycore-som.dtsi b/dts/src/arm64/freescale/imx93-phycore-som.dtsi new file mode 100644 index 0000000000..88c2657b50 --- /dev/null +++ b/dts/src/arm64/freescale/imx93-phycore-som.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com> + * + * Product homepage: + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ + */ + +#include <dt-bindings/leds/common.h> + +#include "imx93.dtsi" + +/{ + model = "PHYTEC phyCORE-i.MX93"; + compatible = "phytec,imx93-phycore-som", "fsl,imx93"; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + alloc-ranges = <0 0x80000000 0 0x40000000>; + size = <0 0x10000000>; + linux,cma-default; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +/* Ethernet */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>, + <&clk IMX93_CLK_ENET_REF>, + <&clk IMX93_CLK_ENET_REF_PHY>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>, <50000000>; + status = "okay"; + + mdio: mdio { + clock-frequency = <5000000>; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* Watchdog */ +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__ENET1_MDC 0x50e + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x502 + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x50e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x50e + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x50e + MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x4000050e + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x179e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x1386 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x1386 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x1386 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x1386 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x1386 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x1386 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x1386 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx93-tqma9352.dtsi b/dts/src/arm64/freescale/imx93-tqma9352.dtsi index f6e422dc26..9d2328c185 100644 --- a/dts/src/arm64/freescale/imx93-tqma9352.dtsi +++ b/dts/src/arm64/freescale/imx93-tqma9352.dtsi @@ -122,10 +122,8 @@ /* protectable identification memory (part of M24C64-D @57) */ eeprom@5f { - compatible = "st,24c64", "atmel,24c64"; + compatible = "atmel,24c64d-wl"; reg = <0x5f>; - size = <32>; - pagesize = <32>; vcc-supply = <®_v3v3>; }; diff --git a/dts/src/arm64/freescale/imx93-var-som-symphony.dts b/dts/src/arm64/freescale/imx93-var-som-symphony.dts new file mode 100644 index 0000000000..576d6982a4 --- /dev/null +++ b/dts/src/arm64/freescale/imx93-var-som-symphony.dts @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + * Copyright 2023 Variscite Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "imx93-var-som.dtsi" + +/{ + model = "Variscite VAR-SOM-MX93 on Symphony evaluation board"; + compatible = "variscite,var-som-mx93-symphony", + "variscite,var-som-mx93", "fsl,imx93"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + }; + + chosen { + stdout-path = &lpuart1; + }; + + /* + * Needed only for Symphony <= v1.5 + */ + reg_fec_phy: regulator-fec-phy { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethosu_mem: ethosu-region@88000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x0 0x88000000 0x0 0x8000000>; + }; + + vdev0vring0: vdev0vring0@87ee0000 { + reg = <0 0x87ee0000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@87ee8000 { + reg = <0 0x87ee8000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@87ef0000 { + reg = <0 0x87ef0000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@87ef8000 { + reg = <0 0x87ef8000 0 0x8000>; + no-map; + }; + + rsc_table: rsc-table@2021f000 { + reg = <0 0x2021f000 0 0x1000>; + no-map; + }; + + vdevbuffer: vdevbuffer@87f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x87f00000 0 0x100000>; + no-map; + }; + + ele_reserved: ele-reserved@87de0000 { + compatible = "shared-dma-pool"; + reg = <0 0x87de0000 0 0x100000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-back { + label = "Back"; + gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + key-home { + label = "Home"; + gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + key-menu { + label = "Menu"; + gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +/* Use external instead of internal RTC*/ +&bbnsm_rtc { + status = "disabled"; +}; + +&eqos { + mdio { + ethphy1: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <5>; + qca,disable-smarteee; + eee-broken-1000t; + reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + vddio-supply = <&vddio1>; + + vddio1: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + phy-supply = <®_fec_phy>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1_gpio>; + pinctrl-2 = <&pinctrl_lpi2c1_gpio>; + scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; + + /* DS1337 RTC module */ + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&lpi2c5 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + pinctrl-2 = <&pinctrl_lpi2c5_gpio>; + scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pca9534: gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + wakeup-source; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* J18.7, J18.9 */ +&lpuart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; + no-sdio; + no-mmc; +}; + +/* Watchdog */ +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c1_gpio: lpi2c1gpiogrp { + fsl,pins = < + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c5_gpio: lpi2c5gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e + MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e + MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx93-var-som.dtsi b/dts/src/arm64/freescale/imx93-var-som.dtsi new file mode 100644 index 0000000000..783938245e --- /dev/null +++ b/dts/src/arm64/freescale/imx93-var-som.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + * Copyright 2023 Variscite Ltd. + */ + +/dts-v1/; + +#include "imx93.dtsi" + +/{ + model = "Variscite VAR-SOM-MX93 module"; + compatible = "variscite,var-som-mx93", "fsl,imx93"; + + mmc_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <10000>; + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ + <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ + }; + + reg_eqos_phy: regulator-eqos-phy { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eqos_phy>; + regulator-name = "eth_phy_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + regulator-always-on; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <1000000>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + eee-broken-1000t; + }; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_reg_eqos_phy: regeqosgrp { + fsl,pins = < + MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx93.dtsi b/dts/src/arm64/freescale/imx93.dtsi index 8f2e7c42ad..601c94e1fa 100644 --- a/dts/src/arm64/freescale/imx93.dtsi +++ b/dts/src/arm64/freescale/imx93.dtsi @@ -294,7 +294,7 @@ status = "disabled"; }; - i3c1: i3c-master@44330000 { + i3c1: i3c@44330000 { compatible = "silvaco,i3c-master-v1"; reg = <0x44330000 0x10000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -671,7 +671,7 @@ status = "disabled"; }; - i3c2: i3c-master@42520000 { + i3c2: i3c@42520000 { compatible = "silvaco,i3c-master-v1"; reg = <0x42520000 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/freescale/mba8mx.dtsi b/dts/src/arm64/freescale/mba8mx.dtsi index e2bc53b8d3..427467df42 100644 --- a/dts/src/arm64/freescale/mba8mx.dtsi +++ b/dts/src/arm64/freescale/mba8mx.dtsi @@ -29,6 +29,12 @@ stdout-path = &uart3; }; + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -100,12 +106,6 @@ }; }; - pcie0_refclk: pcie0-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - reg_12v: regulator-12v { compatible = "regulator-fixed"; regulator-name = "MBA8MX_12V"; @@ -219,7 +219,7 @@ line-name = "BOOT_CFG_OE#"; }; - rst-usb-hub-hog { + rst_usb_hub_hog: rst-usb-hub-hog { gpio-hog; gpios = <13 0>; output-high; @@ -264,6 +264,13 @@ pagesize = <16>; vcc-supply = <®_vcc_3v3>; }; + + pcieclk: clk@68 { + compatible = "renesas,9fgv0441"; + reg = <0x68>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; }; &i2c3 { diff --git a/dts/src/arm64/freescale/mba8xx.dtsi b/dts/src/arm64/freescale/mba8xx.dtsi new file mode 100644 index 0000000000..276d1683b0 --- /dev/null +++ b/dts/src/arm64/freescale/mba8xx.dtsi @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + adc { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>; + }; + + aliases { + rtc0 = &pcf85063; + rtc1 = &rtc; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl_lvds>; + pwms = <&adma_pwm 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_12v0>; + enable-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + chosen { + stdout-path = &lpuart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobuttons>; + autorepeat; + + switch-a { + label = "switcha"; + linux,code = <BTN_0>; + gpios = <&lsio_gpio1 13 GPIO_ACTIVE_LOW>; + }; + + switch-b { + label = "switchb"; + linux,code = <BTN_1>; + gpios = <&lsio_gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&expander 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&expander 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + /* TODO LVDS panels */ + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "V_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie_1v5: regulator-pcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "MBA8XX_PCIE_1V5"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie_1v5>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&lsio_gpio0 30 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1000>; + enable-active-high; + }; + + reg_pcie_3v3: regulator-pcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "MBA8XX_PCIE_3V3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1000>; + enable-active-high; + regulator-always-on; + }; + + reg_3v3_mb: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; + audio-codec = <&tlv320aic3x04>; + ssi-controller = <&sai1>; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0>; + vref-supply = <®_1v8>; + #io-channel-cells = <1>; + status = "okay"; +}; + +&adma_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_admapwm>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&lsio_gpio3>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + + ethphy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&lsio_gpio3>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&i2c1 { + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&mclkout0_lpcg 0>; + clock-names = "mclk"; + iov-supply = <®_1v8>; + ldoin-supply = <®_3v3>; + }; + + se97b_1c: temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + at24c02_54: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_3v3>; + }; + + expander: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9538>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_1v8>; + + gpio-line-names = "", "LED_A", + "LED_B", "", + "DSI_EN", "USB_RESET#", + "V_12V_EN", "PCIE_DIS#"; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2gpio>; + scl-gpios = <&lsio_gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&lsio_gpio2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* TODO LDB */ + +&lpspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3>; + num-cs = <2>; + cs-gpios = <&lsio_gpio0 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +&lsio_gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lsgpio3>; + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "X4_15", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +/* TODO: Mini-PCIe */ + +&sai1 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai1_lpcg 0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + srp-disable; + hnp-disable; + adp-disable; + power-active-high; + over-current-active-low; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3v3_mb>; + no-1-8-v; + no-sdio; + no-mmc; + status = "okay"; +}; + +&iomuxc { + pinctrl_adc0: adc0grp { + fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x02000060>, + <IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x02000060>, + <IMX8QXP_ADC_IN2_ADMA_ADC_IN2 0x02000060>, + <IMX8QXP_ADC_IN3_ADMA_ADC_IN3 0x02000060>; + }; + + pinctrl_admapwm: admapwmgrp { + fsl,pins = <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x00000021>; + }; + + pinctrl_bl_lvds: bllvdsgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30 0x00000021>; + }; + + pinctrl_can0: can0grp { + fsl,pins = <IMX8QXP_UART0_RX_ADMA_FLEXCAN0_RX 0x00000021>, + <IMX8QXP_UART0_TX_ADMA_FLEXCAN0_TX 0x00000021>; + }; + + pinctrl_can1: can1grp { + fsl,pins = <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX 0x00000021>, + <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX 0x00000021>; + }; + + pinctrl_ethphy0: ethphy0grp { + fsl,pins = <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x00000040>, + <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x00000040>; + }; + + pinctrl_ethphy3: ethphy3grp { + fsl,pins = <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x00000040>, + <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x00000040>; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000041>, + <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000041>, + <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000040>, + <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000040>, + <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000040>, + <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000040>; + }; + + pinctrl_fec2: fec2grp { + fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x00000040>, + <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC 0x00000040>, + <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x00000040>, + <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x00000040>, + <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2 0x00000040>, + <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 0x00000040>, + <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC 0x00000040>, + <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x00000040>, + <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x00000040>, + <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x00000040>, + <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 0x00000040>, + <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 0x00000040>; + }; + + pinctrl_gpiobuttons: gpiobuttonsgrp { + fsl,pins = <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13 0x00000020>, + <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14 0x00000020>; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL 0x06000021>, + <IMX8QXP_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA 0x06000021>; + }; + + pinctrl_lpi2c2gpio: lpi2c2gpiogrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 0x06000021>, + <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x06000021>; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = <IMX8QXP_UART1_RX_ADMA_UART1_RX 0x06000020>, + <IMX8QXP_UART1_TX_ADMA_UART1_TX 0x06000020>; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020>, + <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020>; + }; + + pinctrl_lsgpio3: lsgpio3grp { + fsl,pins = <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x00000021>; + }; + + pinctrl_pca9538: pca9538grp { + fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x00000020>; + }; + + pinctrl_pcieb: pcieagrp { + fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x06000041>, + <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x06000041>, + <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000041>; + }; + + pinctrl_reg_pcie_1v5: regpcie1v5grp { + fsl,pins = <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x00000021>; + }; + + pinctrl_reg_pcie_3v3: regpcie3v3grp { + fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x00000021>; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0 0x06000041>, + <IMX8QXP_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000041>, + <IMX8QXP_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000041>, + <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000041>, + <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000041>; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI 0x00000041>, + <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO 0x00000041>, + <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK 0x00000041>, + <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x00000021>, + <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x00000021>; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x00000041>, + <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x00000041>, + <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x00000041>, + <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x00000021>; + }; + + pinctrl_spi3: spi3grp { + fsl,pins = <IMX8QXP_SPI3_SCK_ADMA_SPI3_SCK 0x00000041>, + <IMX8QXP_SPI3_SDI_ADMA_SPI3_SDI 0x00000041>, + <IMX8QXP_SPI3_SDO_ADMA_SPI3_SDO 0x00000041>, + <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16 0x00000021>, + <IMX8QXP_SPI3_CS1_ADMA_SPI3_CS1 0x00000021>; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021>, + <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC 0x00000021>; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021>, + <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021>, + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021>, + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021>, + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021>, + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021>, + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020>; + }; +}; diff --git a/dts/src/arm64/freescale/tqma8xx.dtsi b/dts/src/arm64/freescale/tqma8xx.dtsi new file mode 100644 index 0000000000..d98469a7c4 --- /dev/null +++ b/dts/src/arm64/freescale/tqma8xx.dtsi @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * global autoconfigured region for contiguous allocations + * must not exceed memory size and region + */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x20000000>; + alloc-ranges = <0 0x96000000 0 0x30000000>; + linux,cma-default; + }; + }; +}; + +/* TQMa8Xx only uses industrial grade, reduce trip points accordingly */ +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <100000>; +}; +/* end of temperature grade adjustments */ + +&flexspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <66000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +/* TODO GPU */ + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1gpio>; + scl-gpios = <&lsio_gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&lsio_gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + se97: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; + + at24c02: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + read-only; + vcc-supply = <®_3v3>; + }; + + m24c64: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_3v3>; + }; +}; + +&mu_m0 { + status = "okay"; +}; + +&mu1_m0 { + status = "okay"; +}; + +&thermal_zones { + pmic_thermal: pmic-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <®_1v8>; + vmmc-supply = <®_3v3>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&vpu { + compatible = "nxp,imx8qxp-vpu"; + status = "okay"; +}; + +&vpu_core0 { + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; + +&vpu_core1 { + memory-region = <&encoder_boot>, <&encoder_rpc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x0600004d + IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x0600004d + IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x0600004d + IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x0600004d + IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x0600004d + IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x0600004d + IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x0600004d + IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x0600004d + IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x0600004d + IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x0600004d + IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x0600004d + IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x0600004d + IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x0600004d + IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x0600004d + IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x0600004d + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 + IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 + >; + }; + + pinctrl_lpi2c1gpio: lpi2c1gpiogrp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27 0x06000021 + IMX8QXP_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28 0x06000021 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040 + >; + }; +}; diff --git a/dts/src/arm64/intel/socfpga_agilex5.dtsi b/dts/src/arm64/intel/socfpga_agilex5.dtsi index d66d425e45..1162978329 100644 --- a/dts/src/arm64/intel/socfpga_agilex5.dtsi +++ b/dts/src/arm64/intel/socfpga_agilex5.dtsi @@ -202,7 +202,7 @@ status = "disabled"; }; - i3c0: i3c-master@10da0000 { + i3c0: i3c@10da0000 { compatible = "snps,dw-i3c-master-1.00a"; reg = <0x10da0000 0x1000>; #address-cells = <3>; @@ -212,7 +212,7 @@ status = "disabled"; }; - i3c1: i3c-master@10da1000 { + i3c1: i3c@10da1000 { compatible = "snps,dw-i3c-master-1.00a"; reg = <0x10da1000 0x1000>; #address-cells = <3>; diff --git a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi index b5e042b8e9..5591939e05 100644 --- a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi +++ b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi @@ -77,7 +77,6 @@ #address-cells = <2>; #size-cells = <2>; ranges; - dma-ranges; internal-regs@7f000000 { #address-cells = <1>; @@ -204,6 +203,30 @@ }; }; + mmc_dma: bus@80500000 { + compatible = "simple-bus"; + ranges; + #address-cells = <0x2>; + #size-cells = <0x2>; + reg = <0x0 0x80500000 0x0 0x100000>; + dma-ranges = <0x0 0x0 0x2 0x0 0x0 0x80000000>; + dma-coherent; + + sdhci: mmc@805c0000 { + compatible = "marvell,ac5-sdhci", + "marvell,armada-ap806-sdhci"; + reg = <0x0 0x805c0000 0x0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&emmc_clock>, <&cnm_clock>; + clock-names = "core", "axi"; + bus-width = <8>; + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + }; + }; + /* * Dedicated section for devices behind 32bit controllers so we * can configure specific DMA mapping for them @@ -335,5 +358,11 @@ #clock-cells = <0>; clock-frequency = <400000000>; }; + + emmc_clock: emmc-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; }; diff --git a/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts b/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts index f0ebdb84ee..0c973d7a21 100644 --- a/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts +++ b/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts @@ -99,3 +99,7 @@ }; }; }; + +&sdhci { + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi index e300145ad1..1cc3fa1c35 100644 --- a/dts/src/arm64/marvell/armada-37xx.dtsi +++ b/dts/src/arm64/marvell/armada-37xx.dtsi @@ -431,14 +431,14 @@ crypto: crypto@90000 { compatible = "inside-secure,safexcel-eip97ies"; reg = <0x90000 0x20000>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ring0", "ring1", "ring2", + "ring3", "eip", "mem"; clocks = <&nb_periph_clk 15>; }; diff --git a/dts/src/arm64/marvell/armada-ap807.dtsi b/dts/src/arm64/marvell/armada-ap807.dtsi index 4a23f65d47..a3328d05fc 100644 --- a/dts/src/arm64/marvell/armada-ap807.dtsi +++ b/dts/src/arm64/marvell/armada-ap807.dtsi @@ -33,3 +33,6 @@ "marvell,armada-ap806-sdhci"; /* Backward compatibility */ }; +&ap_thermal { + compatible = "marvell,armada-ap807-thermal"; +}; diff --git a/dts/src/arm64/marvell/armada-cp11x.dtsi b/dts/src/arm64/marvell/armada-cp11x.dtsi index 4ec1aae0a3..7e595ac800 100644 --- a/dts/src/arm64/marvell/armada-cp11x.dtsi +++ b/dts/src/arm64/marvell/armada-cp11x.dtsi @@ -511,14 +511,14 @@ CP11X_LABEL(crypto): crypto@800000 { compatible = "inside-secure,safexcel-eip197b"; reg = <0x800000 0x200000>; - interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, - <88 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <88 IRQ_TYPE_LEVEL_HIGH>, <89 IRQ_TYPE_LEVEL_HIGH>, <90 IRQ_TYPE_LEVEL_HIGH>, <91 IRQ_TYPE_LEVEL_HIGH>, - <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; + <92 IRQ_TYPE_LEVEL_HIGH>, + <87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ring0", "ring1", "ring2", "ring3", + "eip", "mem"; clock-names = "core", "reg"; clocks = <&CP11X_LABEL(clk) 1 26>, <&CP11X_LABEL(clk) 1 17>; diff --git a/dts/src/arm64/mediatek/mt2712-evb.dts b/dts/src/arm64/mediatek/mt2712-evb.dts index fffdb7bbf8..0c38f7b517 100644 --- a/dts/src/arm64/mediatek/mt2712-evb.dts +++ b/dts/src/arm64/mediatek/mt2712-evb.dts @@ -43,12 +43,12 @@ extcon_usb: extcon_iddig { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; }; extcon_usb1: extcon_iddig1 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>; }; usb_p0_vbus: regulator-usb-p0-vbus { diff --git a/dts/src/arm64/mediatek/mt2712e.dtsi b/dts/src/arm64/mediatek/mt2712e.dtsi index ed1a9d3194..6d218caa19 100644 --- a/dts/src/arm64/mediatek/mt2712e.dtsi +++ b/dts/src/arm64/mediatek/mt2712e.dtsi @@ -261,7 +261,7 @@ #clock-cells = <1>; }; - syscfg_pctl_a: syscfg_pctl_a@10005000 { + syscfg_pctl_a: syscon@10005000 { compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon"; reg = <0 0x10005000 0 0x1000>; }; diff --git a/dts/src/arm64/mediatek/mt6797.dtsi b/dts/src/arm64/mediatek/mt6797.dtsi index c3677d77e0..0e9d11b458 100644 --- a/dts/src/arm64/mediatek/mt6797.dtsi +++ b/dts/src/arm64/mediatek/mt6797.dtsi @@ -117,7 +117,7 @@ #clock-cells = <1>; }; - infrasys: infracfg_ao@10001000 { + infrasys: syscon@10001000 { compatible = "mediatek,mt6797-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; @@ -452,19 +452,19 @@ #clock-cells = <1>; }; - imgsys: imgsys_config@15000000 { + imgsys: syscon@15000000 { compatible = "mediatek,mt6797-imgsys", "syscon"; reg = <0 0x15000000 0 0x1000>; #clock-cells = <1>; }; - vdecsys: vdec_gcon@16000000 { + vdecsys: syscon@16000000 { compatible = "mediatek,mt6797-vdecsys", "syscon"; reg = <0 0x16000000 0 0x10000>; #clock-cells = <1>; }; - vencsys: venc_gcon@17000000 { + vencsys: syscon@17000000 { compatible = "mediatek,mt6797-vencsys", "syscon"; reg = <0 0x17000000 0 0x1000>; #clock-cells = <1>; diff --git a/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts index a1f42048dc..224bb28966 100644 --- a/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts @@ -75,6 +75,7 @@ memory@40000000 { reg = <0 0x40000000 0 0x40000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v { @@ -185,6 +186,18 @@ label = "lan3"; }; + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@6 { reg = <6>; label = "cpu"; diff --git a/dts/src/arm64/mediatek/mt7622-rfb1.dts b/dts/src/arm64/mediatek/mt7622-rfb1.dts index 2dc1bdc74e..41629769bd 100644 --- a/dts/src/arm64/mediatek/mt7622-rfb1.dts +++ b/dts/src/arm64/mediatek/mt7622-rfb1.dts @@ -57,6 +57,7 @@ memory@40000000 { reg = <0 0x40000000 0 0x20000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v { @@ -117,6 +118,18 @@ }; }; + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + mdio-bus { #address-cells = <1>; #size-cells = <0>; @@ -155,6 +168,18 @@ label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@6 { reg = <6>; label = "cpu"; diff --git a/dts/src/arm64/mediatek/mt7981b-xiaomi-ax3000t.dts b/dts/src/arm64/mediatek/mt7981b-xiaomi-ax3000t.dts new file mode 100644 index 0000000000..a314c3e05e --- /dev/null +++ b/dts/src/arm64/mediatek/mt7981b-xiaomi-ax3000t.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; + +#include "mt7981b.dtsi" + +/ { + compatible = "xiaomi,ax3000t", "mediatek,mt7981b"; + model = "Xiaomi AX3000T"; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + device_type = "memory"; + }; +}; diff --git a/dts/src/arm64/mediatek/mt7981b.dtsi b/dts/src/arm64/mediatek/mt7981b.dtsi new file mode 100644 index 0000000000..4feff3d1c5 --- /dev/null +++ b/dts/src/arm64/mediatek/mt7981b.dtsi @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +#include <dt-bindings/clock/mediatek,mt7981-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "mediatek,mt7981b"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; + }; + }; + + oscillator-40m { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + clock-output-names = "clkxtal"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + reg = <0 0x0c000000 0 0x40000>, /* GICD */ + <0 0x0c080000 0 0x200000>; /* GICR */ + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + infracfg: clock-controller@10001000 { + compatible = "mediatek,mt7981-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + clock-controller@1001b000 { + compatible = "mediatek,mt7981-topckgen", "syscon"; + reg = <0 0x1001b000 0 0x1000>; + #clock-cells = <1>; + }; + + clock-controller@1001e000 { + compatible = "mediatek,mt7981-apmixedsys"; + reg = <0 0x1001e000 0 0x1000>; + #clock-cells = <1>; + }; + + pwm@10048000 { + compatible = "mediatek,mt7981-pwm"; + reg = <0 0x10048000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_PWM_STA>, + <&infracfg CLK_INFRA_PWM_HCK>, + <&infracfg CLK_INFRA_PWM1_CK>, + <&infracfg CLK_INFRA_PWM2_CK>, + <&infracfg CLK_INFRA_PWM3_CK>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; + #pwm-cells = <2>; + }; + + clock-controller@15000000 { + compatible = "mediatek,mt7981-ethsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/dts/src/arm64/mediatek/mt7986a-acelink-ew-7886cax.dts b/dts/src/arm64/mediatek/mt7986a-acelink-ew-7886cax.dts new file mode 100644 index 0000000000..08b3b08274 --- /dev/null +++ b/dts/src/arm64/mediatek/mt7986a-acelink-ew-7886cax.dts @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +#include "mt7986a.dtsi" + +/ { + compatible = "acelink,ew-7886cax", "mediatek,mt7986a"; + model = "Acelink EW-7886CAX"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + reg = <0 0x40000000 0 0x20000000>; + device_type = "memory"; + }; + + keys { + compatible = "gpio-keys"; + + key-restart { + label = "Reset"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 18 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 19 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + nvmem-cells = <&macaddr>; + nvmem-cell-names = "mac-address"; + }; + + mdio-bus { + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + reset-delay-us = <50000>; + reset-post-delay-us = <20000>; + + #address-cells = <1>; + #size-cells = <0>; + + phy6: phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + }; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x100000>; + label = "bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x80000>; + label = "u-boot-env"; + }; + + partition@180000 { + compatible = "nvmem-cells"; + reg = <0x180000 0x200000>; + label = "factory"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr: macaddr@4 { + reg = <0x4 0x6>; + }; + }; + }; + + partition@380000 { + reg = <0x380000 0x200000>; + label = "fip"; + }; + + partition@580000 { + reg = <0x580000 0x4000000>; + label = "ubi"; + }; + }; + }; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso index 543c13385d..7b97c5c91b 100644 --- a/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso +++ b/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso @@ -15,7 +15,7 @@ __overlay__ { #address-cells = <1>; #size-cells = <0>; - spi_nand: spi_nand@0 { + spi_nand: flash@0 { compatible = "spi-nand"; reg = <0>; spi-max-frequency = <10000000>; diff --git a/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts b/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts index d06d4af43c..e04b1c0c0e 100644 --- a/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/dts/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -43,7 +43,7 @@ #cooling-cells = <2>; /* cooling level (0, 1, 2) - pwm inverted */ cooling-levels = <255 96 0>; - pwms = <&pwm 0 10000 0>; + pwms = <&pwm 0 10000>; status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt7986a-rfb.dts b/dts/src/arm64/mediatek/mt7986a-rfb.dts index 3ef371ca25..5d8e3d3f6c 100644 --- a/dts/src/arm64/mediatek/mt7986a-rfb.dts +++ b/dts/src/arm64/mediatek/mt7986a-rfb.dts @@ -65,6 +65,18 @@ }; }; + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; @@ -237,12 +249,13 @@ pinctrl-0 = <&spi_flash_pins>; cs-gpios = <0>, <0>; status = "okay"; - spi_nand: spi_nand@0 { + + spi_nand: flash@0 { compatible = "spi-nand"; reg = <0>; spi-max-frequency = <10000000>; - spi-tx-buswidth = <4>; - spi-rx-buswidth = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; }; }; @@ -287,6 +300,18 @@ label = "lan4"; }; + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@6 { reg = <6>; label = "cpu"; diff --git a/dts/src/arm64/mediatek/mt7986a.dtsi b/dts/src/arm64/mediatek/mt7986a.dtsi index fc751e0499..b3f416b9a7 100644 --- a/dts/src/arm64/mediatek/mt7986a.dtsi +++ b/dts/src/arm64/mediatek/mt7986a.dtsi @@ -16,49 +16,49 @@ #address-cells = <2>; #size-cells = <2>; - clk40m: oscillator-40m { - compatible = "fixed-clock"; - clock-frequency = <40000000>; - #clock-cells = <0>; - clock-output-names = "clkxtal"; - }; - cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; cpu1: cpu@1 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; cpu2: cpu@2 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x2>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; cpu3: cpu@3 { - device_type = "cpu"; - enable-method = "psci"; compatible = "arm,cortex-a53"; reg = <0x3>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; }; + clk40m: oscillator-40m { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + clock-output-names = "clkxtal"; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -121,38 +121,30 @@ }; - timer { - compatible = "arm,armv8-timer"; - interrupt-parent = <&gic>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; - soc { - #address-cells = <2>; - #size-cells = <2>; compatible = "simple-bus"; ranges; + #address-cells = <2>; + #size-cells = <2>; gic: interrupt-controller@c000000 { compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - interrupt-controller; reg = <0 0x0c000000 0 0x10000>, /* GICD */ <0 0x0c080000 0 0x80000>, /* GICR */ <0 0x0c400000 0 0x2000>, /* GICC */ <0 0x0c410000 0 0x1000>, /* GICH */ <0 0x0c420000 0 0x2000>; /* GICV */ + interrupt-parent = <&gic>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; }; infracfg: infracfg@10001000 { compatible = "mediatek,mt7986-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; wed_pcie: wed-pcie@10003000 { @@ -202,6 +194,19 @@ #interrupt-cells = <2>; }; + pwm: pwm@10048000 { + compatible = "mediatek,mt7986-pwm"; + reg = <0 0x10048000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&infracfg CLK_INFRA_PWM_STA>, + <&infracfg CLK_INFRA_PWM1_CK>, + <&infracfg CLK_INFRA_PWM2_CK>; + clock-names = "top", "main", "pwm1", "pwm2"; + status = "disabled"; + }; + sgmiisys0: syscon@10060000 { compatible = "mediatek,mt7986-sgmiisys_0", "syscon"; @@ -234,26 +239,11 @@ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ring0", "ring1", "ring2", "ring3"; clocks = <&infracfg CLK_INFRA_EIP97_CK>; - clock-names = "infra_eip97_ck"; assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>; assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>; status = "disabled"; }; - pwm: pwm@10048000 { - compatible = "mediatek,mt7986-pwm"; - reg = <0 0x10048000 0 0x1000>; - #clock-cells = <1>; - #pwm-cells = <2>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topckgen CLK_TOP_PWM_SEL>, - <&infracfg CLK_INFRA_PWM_STA>, - <&infracfg CLK_INFRA_PWM1_CK>, - <&infracfg CLK_INFRA_PWM2_CK>; - clock-names = "top", "main", "pwm1", "pwm2"; - status = "disabled"; - }; - uart0: serial@11002000 { compatible = "mediatek,mt7986-uart", "mediatek,mt6577-uart"; @@ -311,9 +301,9 @@ spi0: spi@1100a000 { compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; + reg = <0 0x1100a000 0 0x100>; #address-cells = <1>; #size-cells = <0>; - reg = <0 0x1100a000 0 0x100>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_MPLL_D2>, <&topckgen CLK_TOP_SPI_SEL>, @@ -325,9 +315,9 @@ spi1: spi@1100b000 { compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; + reg = <0 0x1100b000 0 0x100>; #address-cells = <1>; #size-cells = <0>; - reg = <0 0x1100b000 0 0x100>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_MPLL_D2>, <&topckgen CLK_TOP_SPIM_MST_SEL>, @@ -337,6 +327,21 @@ status = "disabled"; }; + thermal: thermal@1100c800 { + compatible = "mediatek,mt7986-thermal"; + reg = <0 0x1100c800 0 0x800>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_THERM_CK>, + <&infracfg CLK_INFRA_ADC_26M_CK>, + <&infracfg CLK_INFRA_ADC_FRC_CK>; + clock-names = "therm", "auxadc", "adc_32k"; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + #thermal-sensor-cells = <1>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + auxadc: adc@1100d000 { compatible = "mediatek,mt7986-auxadc"; reg = <0 0x1100d000 0 0x1000>; @@ -388,39 +393,23 @@ status = "disabled"; }; - thermal: thermal@1100c800 { - #thermal-sensor-cells = <1>; - compatible = "mediatek,mt7986-thermal"; - reg = <0 0x1100c800 0 0x800>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&infracfg CLK_INFRA_THERM_CK>, - <&infracfg CLK_INFRA_ADC_26M_CK>, - <&infracfg CLK_INFRA_ADC_FRC_CK>; - clock-names = "therm", "auxadc", "adc_32k"; - mediatek,auxadc = <&auxadc>; - mediatek,apmixedsys = <&apmixedsys>; - nvmem-cells = <&thermal_calibration>; - nvmem-cell-names = "calibration-data"; - }; - pcie: pcie@11280000 { compatible = "mediatek,mt7986-pcie", "mediatek,mt8192-pcie"; + reg = <0x00 0x11280000 0x00 0x4000>; + reg-names = "pcie-mac"; + ranges = <0x82000000 0x00 0x20000000 0x00 + 0x20000000 0x00 0x10000000>; device_type = "pci"; #address-cells = <3>; #size-cells = <2>; - reg = <0x00 0x11280000 0x00 0x4000>; - reg-names = "pcie-mac"; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0x00 0x20000000 0x00 - 0x20000000 0x00 0x10000000>; clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>, <&infracfg CLK_INFRA_IPCIE_CK>, <&infracfg CLK_INFRA_IPCIER_CK>, <&infracfg CLK_INFRA_IPCIEB_CK>; clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m"; - status = "disabled"; phys = <&pcie_port PHY_TYPE_PCIE>; phy-names = "pcie-phy"; @@ -431,6 +420,8 @@ <0 0 0 2 &pcie_intc 1>, <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; + status = "disabled"; + pcie_intc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; @@ -441,9 +432,9 @@ pcie_phy: t-phy { compatible = "mediatek,mt7986-tphy", "mediatek,generic-tphy-v2"; + ranges; #address-cells = <2>; #size-cells = <2>; - ranges; status = "disabled"; pcie_port: pcie-phy@11c00000 { @@ -468,9 +459,9 @@ usb_phy: t-phy@11e10000 { compatible = "mediatek,mt7986-tphy", "mediatek,generic-tphy-v2"; + ranges = <0 0 0x11e10000 0x1700>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0x11e10000 0x1700>; status = "disabled"; u2port0: usb-phy@0 { @@ -498,11 +489,11 @@ }; ethsys: syscon@15000000 { - #address-cells = <1>; - #size-cells = <1>; compatible = "mediatek,mt7986-ethsys", "syscon"; reg = <0 0x15000000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; @@ -533,20 +524,6 @@ mediatek,wo-ccif = <&wo_ccif1>; }; - wo_ccif0: syscon@151a5000 { - compatible = "mediatek,mt7986-wo-ccif", "syscon"; - reg = <0 0x151a5000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; - }; - - wo_ccif1: syscon@151ad000 { - compatible = "mediatek,mt7986-wo-ccif", "syscon"; - reg = <0 0x151ad000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; - }; - eth: ethernet@15100000 { compatible = "mediatek,mt7986-eth"; reg = <0 0x15100000 0 0x80000>; @@ -579,26 +556,40 @@ <&topckgen CLK_TOP_SGM_325M_SEL>; assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, <&apmixedsys CLK_APMIXED_SGMPLL>; + #reset-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; mediatek,ethsys = <ðsys>; mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; mediatek,wed-pcie = <&wed_pcie>; mediatek,wed = <&wed0>, <&wed1>; - #reset-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; + wo_ccif0: syscon@151a5000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151a5000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + }; + + wo_ccif1: syscon@151ad000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151ad000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + }; + wifi: wifi@18000000 { compatible = "mediatek,mt7986-wmac"; + reg = <0 0x18000000 0 0x1000000>, + <0 0x10003000 0 0x1000>, + <0 0x11d10000 0 0x1000>; resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; reset-names = "consys"; clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>, <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; clock-names = "mcu", "ap2conn"; - reg = <0 0x18000000 0 0x1000000>, - <0 0x10003000 0 0x1000>, - <0 0x11d10000 0 0x1000>; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, @@ -646,4 +637,13 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; }; diff --git a/dts/src/arm64/mediatek/mt7986b-rfb.dts b/dts/src/arm64/mediatek/mt7986b-rfb.dts index dde190442e..58f77d9324 100644 --- a/dts/src/arm64/mediatek/mt7986b-rfb.dts +++ b/dts/src/arm64/mediatek/mt7986b-rfb.dts @@ -45,6 +45,18 @@ }; }; + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; @@ -83,6 +95,18 @@ label = "lan4"; }; + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@6 { reg = <6>; label = "cpu"; @@ -152,12 +176,13 @@ pinctrl-0 = <&spi_flash_pins>; cs-gpios = <0>, <0>; status = "okay"; - spi_nand: spi_nand@0 { + + spi_nand: flash@0 { compatible = "spi-nand"; reg = <0>; spi-max-frequency = <10000000>; - spi-tx-buswidth = <4>; - spi-rx-buswidth = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; }; }; diff --git a/dts/src/arm64/mediatek/mt7988a-bananapi-bpi-r4.dts b/dts/src/arm64/mediatek/mt7988a-bananapi-bpi-r4.dts new file mode 100644 index 0000000000..efc4ad0b08 --- /dev/null +++ b/dts/src/arm64/mediatek/mt7988a-bananapi-bpi-r4.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; + +#include "mt7988a.dtsi" + +/ { + compatible = "bananapi,bpi-r4", "mediatek,mt7988a"; + model = "Banana Pi BPI-R4"; + chassis-type = "embedded"; +}; diff --git a/dts/src/arm64/mediatek/mt7988a.dtsi b/dts/src/arm64/mediatek/mt7988a.dtsi new file mode 100644 index 0000000000..bba97de4fb --- /dev/null +++ b/dts/src/arm64/mediatek/mt7988a.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "mediatek,mt7988a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a73"; + reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a73"; + reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a73"; + reg = <0x2>; + device_type = "cpu"; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a73"; + reg = <0x3>; + device_type = "cpu"; + enable-method = "psci"; + }; + }; + + oscillator-40m { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + clock-output-names = "clkxtal"; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + reg = <0 0x0c000000 0 0x40000>, /* GICD */ + <0 0x0c080000 0 0x200000>, /* GICR */ + <0 0x0c400000 0 0x2000>, /* GICC */ + <0 0x0c410000 0 0x1000>, /* GICH */ + <0 0x0c420000 0 0x2000>; /* GICV */ + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + clock-controller@10001000 { + compatible = "mediatek,mt7988-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + clock-controller@1001b000 { + compatible = "mediatek,mt7988-topckgen", "syscon"; + reg = <0 0x1001b000 0 0x1000>; + #clock-cells = <1>; + }; + + watchdog: watchdog@1001c000 { + compatible = "mediatek,mt7988-wdt"; + reg = <0 0x1001c000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + clock-controller@1001e000 { + compatible = "mediatek,mt7988-apmixedsys"; + reg = <0 0x1001e000 0 0x1000>; + #clock-cells = <1>; + }; + + clock-controller@11f40000 { + compatible = "mediatek,mt7988-xfi-pll"; + reg = <0 0x11f40000 0 0x1000>; + resets = <&watchdog 16>; + #clock-cells = <1>; + }; + + clock-controller@15000000 { + compatible = "mediatek,mt7988-ethsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + clock-controller@15031000 { + compatible = "mediatek,mt7988-ethwarp"; + reg = <0 0x15031000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts b/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts index 256f245ac0..1c9fc791bd 100644 --- a/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts +++ b/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts @@ -14,7 +14,7 @@ &cpu_thermal { trips { - cpu_crit: cpu_crit0 { + cpu_crit: cpu-crit0 { temperature = <100000>; type = "critical"; }; diff --git a/dts/src/arm64/mediatek/mt8173-elm.dtsi b/dts/src/arm64/mediatek/mt8173-elm.dtsi index 8d614ac2c5..6d962d437e 100644 --- a/dts/src/arm64/mediatek/mt8173-elm.dtsi +++ b/dts/src/arm64/mediatek/mt8173-elm.dtsi @@ -1135,7 +1135,7 @@ compatible = "mediatek,mt6397-rtc"; }; - syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { + syscfg_pctl_pmic: syscon@c000 { compatible = "mediatek,mt6397-pctl-pmic-syscfg", "syscon"; reg = <0 0x0000c000 0 0x0108>; @@ -1155,6 +1155,7 @@ spi-max-frequency = <12000000>; interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>; google,cros-ec-spi-msg-delay = <500>; + wakeup-source; i2c_tunnel: i2c-tunnel0 { compatible = "google,cros-ec-i2c-tunnel"; diff --git a/dts/src/arm64/mediatek/mt8173-evb.dts b/dts/src/arm64/mediatek/mt8173-evb.dts index 0e5c628d1e..3fab21f59d 100644 --- a/dts/src/arm64/mediatek/mt8173-evb.dts +++ b/dts/src/arm64/mediatek/mt8173-evb.dts @@ -41,7 +41,7 @@ extcon_usb: extcon_iddig { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>; }; usb_p1_vbus: regulator-usb-p1 { diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi index cac4cd0a03..3458be7f7f 100644 --- a/dts/src/arm64/mediatek/mt8173.dtsi +++ b/dts/src/arm64/mediatek/mt8173.dtsi @@ -222,14 +222,14 @@ }; }; - pmu_a53 { + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; interrupt-affinity = <&cpu0>, <&cpu1>; }; - pmu_a72 { + pmu-a72 { compatible = "arm,cortex-a72-pmu"; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>; @@ -286,7 +286,7 @@ type = "passive"; }; - cpu_crit: cpu_crit0 { + cpu_crit: cpu-crit0 { temperature = <115000>; hysteresis = <2000>; type = "critical"; @@ -318,7 +318,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; - vpu_dma_reserved: vpu_dma_mem_region@b7000000 { + vpu_dma_reserved: vpu-dma-mem@b7000000 { compatible = "shared-dma-pool"; reg = <0 0xb7000000 0 0x500000>; alignment = <0x1000>; @@ -366,7 +366,7 @@ #reset-cells = <1>; }; - syscfg_pctl_a: syscfg_pctl_a@10005000 { + syscfg_pctl_a: syscon@10005000 { compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon"; reg = <0 0x10005000 0 0x1000>; }; @@ -590,6 +590,15 @@ reg = <0 0x10206000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + + socinfo-data1@40 { + reg = <0x040 0x4>; + }; + + socinfo-data2@44 { + reg = <0x044 0x4>; + }; + thermal_calibration: calib@528 { reg = <0x528 0xc>; }; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi index b6a9830af2..bfb9e42c8a 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi @@ -360,6 +360,10 @@ }; &cros_ec { + cbas { + compatible = "google,cros-cbas"; + }; + keyboard-controller { compatible = "google,cros-ec-keyb-switches"; }; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kodama.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-kodama.dtsi index 306c95166f..5c1bf6a1e4 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui-kodama.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui-kodama.dtsi @@ -339,6 +339,10 @@ }; &cros_ec { + cbas { + compatible = "google,cros-cbas"; + }; + keyboard-controller { compatible = "google,cros-ec-keyb-switches"; }; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-krane.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-krane.dtsi index 382e4c6d71..0f5fa893a7 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui-krane.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui-krane.dtsi @@ -343,6 +343,10 @@ }; &cros_ec { + cbas { + compatible = "google,cros-cbas"; + }; + keyboard-controller { compatible = "google,cros-ec-keyb-switches"; }; diff --git a/dts/src/arm64/mediatek/mt8183-kukui.dtsi b/dts/src/arm64/mediatek/mt8183-kukui.dtsi index 1b3396b1ce..6bd7424ef6 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui.dtsi @@ -924,6 +924,7 @@ interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_odl>; + wakeup-source; i2c_tunnel: i2c-tunnel { compatible = "google,cros-ec-i2c-tunnel"; @@ -937,10 +938,6 @@ google,usb-port-id = <0>; }; - cbas { - compatible = "google,cros-cbas"; - }; - typec { compatible = "google,cros-ec-typec"; #address-cells = <1>; diff --git a/dts/src/arm64/mediatek/mt8183-pumpkin.dts b/dts/src/arm64/mediatek/mt8183-pumpkin.dts index 76449b4cf2..333c516af4 100644 --- a/dts/src/arm64/mediatek/mt8183-pumpkin.dts +++ b/dts/src/arm64/mediatek/mt8183-pumpkin.dts @@ -33,7 +33,7 @@ #size-cells = <2>; ranges; - scp_mem_reserved: scp_mem_region@50000000 { + scp_mem_reserved: scp-mem@50000000 { compatible = "shared-dma-pool"; reg = <0 0x50000000 0 0x2900000>; no-map; diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi index 920ee415ef..93dfbf1302 100644 --- a/dts/src/arm64/mediatek/mt8183.dtsi +++ b/dts/src/arm64/mediatek/mt8183.dtsi @@ -1585,6 +1585,15 @@ reg = <0 0x11f10000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + + socinfo-data1@4c { + reg = <0x04c 0x4>; + }; + + socinfo-data2@60 { + reg = <0x060 0x4>; + }; + thermal_calibration: calib@180 { reg = <0x180 0xc>; }; @@ -1955,7 +1964,7 @@ power-domains = <&spm MT8183_POWER_DOMAIN_VENC>; }; - venc_jpg: venc_jpg@17030000 { + venc_jpg: jpeg-encoder@17030000 { compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc"; reg = <0 0x17030000 0 0x1000>; interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-krabby.dtsi b/dts/src/arm64/mediatek/mt8186-corsola-krabby.dtsi new file mode 100644 index 0000000000..7c971198fa --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-krabby.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + i2c4 = &i2c4; + }; +}; + +&dsi_out { + remote-endpoint = <&ps8640_in>; +}; + +&i2c0 { + clock-frequency = <400000>; + + edp-bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_pins>; + powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>; + vdd12-supply = <&mt6366_vrf12_reg>; + vdd33-supply = <&mt6366_vcn33_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ps8640_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; + }; +}; + +&i2c1 { + i2c-scl-internal-delay-ns = <10000>; + + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_s3>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; + + proximity@28 { + compatible = "semtech,sx9324"; + reg = <0x28>; + #io-channel-cells = <1>; + interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sar_sensor_pins>; + vdd-supply = <&mt6366_vio18_reg>; + svdd-supply = <&mt6366_vio18_reg>; + }; +}; + +&pio { + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO136__FUNC_SDA4>, + <PINMUX_GPIO135__FUNC_SCL4>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + ps8640_pins: ps8640-pins { + pins-pwrdn-rst { + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>, + <PINMUX_GPIO98__FUNC_GPIO98>; + output-low; + }; + }; + + sar_sensor_pins: sar-sensor-pins { + pins-irq { + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>; + input-enable; + bias-pull-up; + }; + }; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393216.dts b/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393216.dts new file mode 100644 index 0000000000..c9673381ad --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393216.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Magneton board"; + compatible = "google,steelix-sku393219", "google,steelix-sku393216", + "google,steelix", "mediatek,mt8186"; + chassis-type = "laptop"; +}; + +&gpio_keys { + status = "disabled"; +}; + +&i2c1 { + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + vdd-supply = <&pp3300_s3>; + post-power-on-delay-ms = <350>; + hid-descr-addr = <0x0001>; + }; +}; + +&touchscreen { + status = "disabled"; +}; + +&usb_c1 { + status = "disabled"; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393217.dts b/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393217.dts new file mode 100644 index 0000000000..28e3bbe564 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393217.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Magneton board"; + compatible = "google,steelix-sku393220", "google,steelix-sku393217", + "google,steelix", "mediatek,mt8186"; + chassis-type = "laptop"; +}; + +&gpio_keys { + status = "disabled"; +}; + +&i2c1 { + touchscreen@40 { + compatible = "hid-over-i2c"; + reg = <0x40>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + vdd-supply = <&pp3300_s3>; + post-power-on-delay-ms = <450>; + hid-descr-addr = <0x0001>; + }; +}; + +&touchscreen { + status = "disabled"; +}; + +&usb_c1 { + status = "disabled"; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393218.dts b/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393218.dts new file mode 100644 index 0000000000..332894218f --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-magneton-sku393218.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Magneton board"; + compatible = "google,steelix-sku393221", "google,steelix-sku393218", + "google,steelix", "mediatek,mt8186"; + chassis-type = "laptop"; +}; + +&gpio_keys { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; + +&usb_c1 { + status = "disabled"; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-rusty-sku196608.dts b/dts/src/arm64/mediatek/mt8186-corsola-rusty-sku196608.dts new file mode 100644 index 0000000000..731b0d6022 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-rusty-sku196608.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Rusty board"; + compatible = "google,steelix-sku196609", "google,steelix-sku196608", + "google,steelix", "mediatek,mt8186"; + chassis-type = "laptop"; +}; + +&gpio_keys { + status = "disabled"; +}; + +&i2c1 { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-steelix-sku131072.dts b/dts/src/arm64/mediatek/mt8186-corsola-steelix-sku131072.dts new file mode 100644 index 0000000000..eae17bca85 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-steelix-sku131072.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Steelix board"; + compatible = "google,steelix-sku131072", "google,steelix", + "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&mt6366codec { + mediatek,dmic-mode = <0>; /* two-wire */ +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-steelix-sku131073.dts b/dts/src/arm64/mediatek/mt8186-corsola-steelix-sku131073.dts new file mode 100644 index 0000000000..a55375b95d --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-steelix-sku131073.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Steelix board"; + compatible = "google,steelix-sku131073", "google,steelix", + "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&mt6366codec { + mediatek,dmic-mode = <1>; /* one-wire */ +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-steelix.dtsi b/dts/src/arm64/mediatek/mt8186-corsola-steelix.dtsi new file mode 100644 index 0000000000..e74e886a00 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-steelix.dtsi @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/{ + pp1000_edpbrdg: regulator-pp1000-edpbrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1000_edpbrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp1000_edpbrdg>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 29 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_z2>; + }; + + pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx { + compatible = "regulator-fixed"; + regulator-name = "pp1800_edpbrdg_dx"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp1800_edpbrdg>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; + vin-supply = <&mt6366_vio18_reg>; + }; + + pp3300_edp_dx: regulator-pp3300-edp-dx { + compatible = "regulator-fixed"; + regulator-name = "pp3300_edp_dx"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_edpbrdg>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 31 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_z2>; + }; +}; + +&dsi_out { + remote-endpoint = <&anx7625_in>; +}; + +&i2c0 { + clock-frequency = <400000>; + + anx_bridge: anx7625@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_pins>; + enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_edpbrdg>; + vdd18-supply = <&pp1800_edpbrdg_dx>; + vdd33-supply = <&pp3300_edp_dx>; + analogix,lane0-swing = /bits/ 8 <0x70 0x30>; + analogix,lane1-swing = /bits/ 8 <0x70 0x30>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + anx7625_in: endpoint { + remote-endpoint = <&dsi_out>; + data-lanes = <0 1 2 3>; + }; + }; + + port@1 { + reg = <1>; + + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + }; + }; +}; + +&i2c1 { + touchscreen: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vdd-supply = <&pp3300_s3>; + goodix,no-reset-during-suspend; + }; +}; + +&i2c2 { + i2c-scl-internal-delay-ns = <22000>; + + /* second source component */ + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x01, 0x04, KEY_MICMUTE) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&pio { + anx7625_pins: anx7625-pins { + pins-int { + pinmux = <PINMUX_GPIO9__FUNC_GPIO9>; + input-enable; + bias-disable; + }; + + pins-reset { + pinmux = <PINMUX_GPIO98__FUNC_GPIO98>; + output-low; + }; + + pins-power-en { + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>; + output-low; + }; + }; + + en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO29__FUNC_GPIO29>; + output-low; + }; + }; + + en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO30__FUNC_GPIO30>; + output-low; + }; + }; + + en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>; + output-low; + }; + }; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-tentacool-sku327681.dts b/dts/src/arm64/mediatek/mt8186-corsola-tentacool-sku327681.dts new file mode 100644 index 0000000000..9bb64353ca --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-tentacool-sku327681.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-krabby.dtsi" + +/ { + model = "Google Tentacool board"; + compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186"; + chassis-type = "laptop"; +}; + +/* Tentacool omits the pen. */ +&gpio_keys { + status = "disabled"; +}; + +/* Tentacool omits the touchscreen; nothing else is on i2c1. */ +&i2c1 { + status = "disabled"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +/* Tentacool omits the touchscreen. */ +&touchscreen { + status = "disabled"; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-tentacool-sku327683.dts b/dts/src/arm64/mediatek/mt8186-corsola-tentacool-sku327683.dts new file mode 100644 index 0000000000..c3ae6f9616 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-tentacool-sku327683.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +#include "mt8186-corsola-tentacool-sku327681.dts" + +/ { + compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186"; +}; + +/* This variant replaces only the trackpad controller. */ +&i2c2 { + /delete-node/ trackpad@15; + + trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + }; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/dts/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262144.dts new file mode 100644 index 0000000000..26d3451a5e --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262144.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-krabby.dtsi" + +/ { + model = "Google Tentacruel board"; + compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146", + "google,tentacruel-sku262145", "google,tentacruel-sku262144", + "google,tentacruel", "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/dts/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262148.dts new file mode 100644 index 0000000000..447b57b12b --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262148.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +#include "mt8186-corsola-tentacruel-sku262144.dts" + +/ { + compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150", + "google,tentacruel-sku262149", "google,tentacruel-sku262148", + "google,tentacruel", "mediatek,mt8186"; +}; + +/* This variant replaces only the trackpad controller. */ +&i2c2 { + /delete-node/ trackpad@15; + + trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + }; +}; diff --git a/dts/src/arm64/mediatek/mt8186-corsola.dtsi b/dts/src/arm64/mediatek/mt8186-corsola.dtsi new file mode 100644 index 0000000000..3dea28f1d8 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8186-corsola.dtsi @@ -0,0 +1,1681 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 MediaTek Inc. + */ +/dts-v1/; +#include "mt8186.dtsi" +#include <dt-bindings/pinctrl/mt8186-pinfunc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h> + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + mmc0 = &mmc0; + mmc1 = &mmc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + /* The size should be filled in by the bootloader. */ + reg = <0 0x40000000 0 0>; + }; + + backlight_lcd0: backlight-lcd0 { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 500000>; + power-supply = <&ppvar_sys>; + enable-gpios = <&pio 152 0>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + }; + + bt-sco-codec { + compatible = "linux,bt-sco"; + #sound-dai-cells = <0>; + }; + + dmic-codec { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + num-channels = <2>; + wakeup-delay-ms = <50>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject>; + + pen_insert: pen-insert-switch { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&pio 18 GPIO_ACTIVE_LOW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + }; + }; + + pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp1800_dpbrdg>; + gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + regulator-name = "pp1800_dpbrdg_dx"; + enable-active-high; + vin-supply = <&mt6366_vio18_reg>; + }; + + pp3300_disp_x: regulator-pp3300-disp-x { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_fixed_pins>; + gpios = <&pio 153 GPIO_ACTIVE_HIGH>; + regulator-name = "pp3300_disp_x"; + enable-active-high; + regulator-boot-on; + vin-supply = <&pp3300_z2>; + }; + + /* system wide LDO 3.3V power rail */ + pp3300_z5: regulator-pp3300-ldo-z5 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_ldo_z5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* separately switched 3.3V power rail */ + pp3300_s3: regulator-pp3300-s3 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_s3"; + /* automatically sequenced by PMIC EXT_PMIC_EN2 */ + regulator-always-on; + regulator-boot-on; + vin-supply = <&pp3300_z2>; + }; + + /* system wide 3.3V power rail */ + pp3300_z2: regulator-pp3300-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z2"; + /* EN pin tied to pp4200_z2, which is controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide 4.2V power rail */ + pp4200_z2: regulator-pp4200-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp4200_z2"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide switching 5.0V power rail */ + pp5000_z2: regulator-pp5000-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp5000_z2"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide semi-regulated power rail from battery or USB */ + ppvar_sys: regulator-ppvar-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; + no-map; + }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xA00000>; + no-map; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x10a0000>; + no-map; + }; + }; + + sound: sound { + compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound"; + pinctrl-names = "aud_clk_mosi_off", + "aud_clk_mosi_on", + "aud_clk_miso_off", + "aud_clk_miso_on", + "aud_dat_miso_off", + "aud_dat_miso_on", + "aud_dat_mosi_off", + "aud_dat_mosi_on", + "aud_gpio_i2s0_off", + "aud_gpio_i2s0_on", + "aud_gpio_i2s1_off", + "aud_gpio_i2s1_on", + "aud_gpio_i2s2_off", + "aud_gpio_i2s2_on", + "aud_gpio_i2s3_off", + "aud_gpio_i2s3_on", + "aud_gpio_pcm_off", + "aud_gpio_pcm_on", + "aud_gpio_dmic_sec"; + pinctrl-0 = <&aud_clk_mosi_off>; + pinctrl-1 = <&aud_clk_mosi_on>; + pinctrl-2 = <&aud_clk_miso_off>; + pinctrl-3 = <&aud_clk_miso_on>; + pinctrl-4 = <&aud_dat_miso_off>; + pinctrl-5 = <&aud_dat_miso_on>; + pinctrl-6 = <&aud_dat_mosi_off>; + pinctrl-7 = <&aud_dat_mosi_on>; + pinctrl-8 = <&aud_gpio_i2s0_off>; + pinctrl-9 = <&aud_gpio_i2s0_on>; + pinctrl-10 = <&aud_gpio_i2s1_off>; + pinctrl-11 = <&aud_gpio_i2s1_on>; + pinctrl-12 = <&aud_gpio_i2s2_off>; + pinctrl-13 = <&aud_gpio_i2s2_on>; + pinctrl-14 = <&aud_gpio_i2s3_off>; + pinctrl-15 = <&aud_gpio_i2s3_on>; + pinctrl-16 = <&aud_gpio_pcm_off>; + pinctrl-17 = <&aud_gpio_pcm_on>; + pinctrl-18 = <&aud_gpio_dmic_sec>; + mediatek,adsp = <&adsp>; + mediatek,platform = <&afe>; + + playback-codecs { + sound-dai = <&it6505dptx>, <&rt1019p>; + }; + + headset-codec { + sound-dai = <&rt5682s 0>; + }; + }; + + rt1019p: speaker-codec { + compatible = "realtek,rt1019p"; + pinctrl-names = "default"; + pinctrl-0 = <&rt1019p_pins_default>; + #sound-dai-cells = <0>; + sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>; + }; + + usb_p1_vbus: regulator-usb-p1-vbus { + compatible = "regulator-fixed"; + gpio = <&pio 148 GPIO_ACTIVE_HIGH>; + regulator-name = "vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + vin-supply = <&pp5000_z2>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_pin>; + post-power-on-delay-ms = <50>; + reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>; + }; + + wifi_wakeup: wifi-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wakeup_pin>; + + wowlan-event { + label = "Wake on WiFi"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; +}; + +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + status = "okay"; +}; + +&cci { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu0 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu5 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu6 { + proc-supply = <&mt6366_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6366_vproc11_reg>; +}; + +&dpi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dpi_pins_default>; + pinctrl-1 = <&dpi_pins_sleep>; + status = "okay"; +}; + +&dpi_out { + remote-endpoint = <&it6505_in>; +}; + +&dsi0 { + status = "okay"; +}; + +&gic { + mediatek,broken-save-restore-fw; +}; + +&gpu { + mali-supply = <&mt6366_vgpu_reg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <8000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + /* + * Trackpad pin put here to work around second source components + * sharing the pinmux in steelix designs. + */ + pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>; + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <10000>; + status = "okay"; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&pp3300_s3>; + wakeup-source; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + status = "okay"; + + it6505dptx: dp-bridge@5c { + compatible = "ite,it6505"; + reg = <0x5c>; + interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + #sound-dai-cells = <0>; + ovdd-supply = <&mt6366_vsim2_reg>; + pwr18-supply = <&pp1800_dpbrdg_dx>; + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + it6505_in: endpoint { + link-frequencies = /bits/ 64 <150000000>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + + rt5682s: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>; + #sound-dai-cells = <1>; + AVDD-supply = <&mt6366_vio18_reg>; + DBVDD-supply = <&mt6366_vio18_reg>; + LDO1-IN-supply = <&mt6366_vio18_reg>; + MICVDD-supply = <&pp3300_z2>; + realtek,jd-src = <1>; + }; +}; + +&mfg0 { + domain-supply = <&mt6366_vsram_gpu_reg>; +}; + +&mfg1 { + domain-supply = <&mt6366_vgpu_reg>; +}; + +&mipi_tx0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + no-sd; + no-sdio; + cap-mmc-hw-reset; + hs400-ds-delay = <0x11814>; + mediatek,hs400-ds-dly3 = <0x14>; + vmmc-supply = <&mt6366_vemc_reg>; + vqmmc-supply = <&mt6366_vio18_reg>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs", "state_eint"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + pinctrl-2 = <&mmc1_pins_eint>; + /delete-property/ interrupts; + interrupt-names = "msdc", "sdio_wakeup"; + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>, + <&pio 87 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr104; + sd-uhs-sdr50; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&pp3300_s3>; + vqmmc-supply = <&mt6366_vio18_reg>; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + bluetooth@2 { + compatible = "mediatek,mt7921s-bluetooth"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins_reset>; + reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>; + }; +}; + +&nor_flash { + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>; + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <39000000>; + }; +}; + +&pio { + /* 185 lines */ + gpio-line-names = "TP", + "TP", + "TP", + "I2S0_HP_DI", + "I2S3_DP_SPKR_DO", + "SAR_INT_ODL", + "BT_WAKE_AP_ODL", + "WIFI_INT_ODL", + "DPBRDG_INT_ODL", + "EDPBRDG_INT_ODL", + "EC_AP_HPD_OD", + "TCHPAD_INT_ODL", + "TCHSCR_INT_1V8_ODL", + "EC_AP_INT_ODL", + "EC_IN_RW_ODL", + "GSC_AP_INT_ODL", + /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */ + "AP_FLASH_WP_L", + "HP_INT_ODL", + "PEN_EJECT_OD", + "WCAM_PWDN_L", + "WCAM_RST_L", + "UCAM_SEN_EN", + "UCAM_RST_L", + "LTE_RESET_L", + "LTE_SAR_DETECT_L", + "I2S2_DP_SPK_MCK", + "I2S2_DP_SPKR_BCK", + "I2S2_DP_SPKR_LRCK", + "I2S2_DP_SPKR_DI (TP)", + "EN_PP1000_EDPBRDG", + "EN_PP1800_EDPBRDG", + "EN_PP3300_EDPBRDG", + "UART_GSC_TX_AP_RX", + "UART_AP_TX_GSC_RX", + "UART_DBGCON_TX_ADSP_RX", + "UART_ADSP_TX_DBGCON_RX", + "EN_PP1000_DPBRDG", + "TCHSCR_REPORT_DISABLE", + "EN_PP3300_DPBRDG", + "EN_PP1800_DPBRDG", + "SPI_AP_CLK_EC", + "SPI_AP_CS_EC_L", + "SPI_AP_DO_EC_DI", + "SPI_AP_DI_EC_DO", + "SPI_AP_CLK_GSC", + "SPI_AP_CS_GSC_L", + "SPI_AP_DO_GSC_DI", + "SPI_AP_DI_GSC_DO", + "UART_DBGCON_TX_SCP_RX", + "UART_SCP_TX_DBGCON_RX", + "EN_PP1200_CAM_X", + "EN_PP2800A_VCM_X", + "EN_PP2800A_UCAM_X", + "EN_PP2800A_WCAM_X", + "WLAN_MODULE_RST_L", + "EN_PP1200_UCAM_X", + "I2S1_HP_DO", + "I2S1_HP_BCK", + "I2S1_HP_LRCK", + "I2S1_HP_MCK", + "TCHSCR_RST_1V8_L", + "SPI_AP_CLK_ROM", + "SPI_AP_CS_ROM_L", + "SPI_AP_DO_ROM_DI", + "SPI_AP_DI_ROM_DO", + "NC", + "NC", + "EMMC_STRB", + "EMMC_CLK", + "EMMC_CMD", + "EMMC_RST_L", + "EMMC_DATA0", + "EMMC_DATA1", + "EMMC_DATA2", + "EMMC_DATA3", + "EMMC_DATA4", + "EMMC_DATA5", + "EMMC_DATA6", + "EMMC_DATA7", + "AP_KPCOL0", + "NC", + "NC", + "NC", + "TP", + "SDIO_CLK", + "SDIO_CMD", + "SDIO_DATA0", + "SDIO_DATA1", + "SDIO_DATA2", + "SDIO_DATA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "EDPBRDG_PWREN", + "BL_PWM_1V8", + "EDPBRDG_RST_L", + "MIPI_DPI_CLK", + "MIPI_DPI_VSYNC", + "MIPI_DPI_HSYNC", + "MIPI_DPI_DE", + "MIPI_DPI_D0", + "MIPI_DPI_D1", + "MIPI_DPI_D2", + "MIPI_DPI_D3", + "MIPI_DPI_D4", + "MIPI_DPI_D5", + "MIPI_DPI_D6", + "MIPI_DPI_DA7", + "MIPI_DPI_D8", + "MIPI_DPI_D9", + "MIPI_DPI_D10", + "MIPI_DPI_D11", + "PCM_BT_CLK", + "PCM_BT_SYNC", + "PCM_BT_DI", + "PCM_BT_DO", + "JTAG_TMS_TP", + "JTAG_TCK_TP", + "JTAG_TDI_TP", + "JTAG_TDO_TP", + "JTAG_TRSTN_TP", + "CLK_24M_WCAM", + "CLK_24M_UCAM", + "UCAM_DET_ODL", + "AP_I2C_EDPBRDG_SCL_1V8", + "AP_I2C_EDPBRDG_SDA_1V8", + "AP_I2C_TCHSCR_SCL_1V8", + "AP_I2C_TCHSCR_SDA_1V8", + "AP_I2C_TCHPAD_SCL_1V8", + "AP_I2C_TCHPAD_SDA_1V8", + "AP_I2C_DPBRDG_SCL_1V8", + "AP_I2C_DPBRDG_SDA_1V8", + "AP_I2C_WLAN_SCL_1V8", + "AP_I2C_WLAN_SDA_1V8", + "AP_I2C_AUD_SCL_1V8", + "AP_I2C_AUD_SDA_1V8", + "AP_I2C_TPM_SCL_1V8", + "AP_I2C_UCAM_SDA_1V8", + "AP_I2C_UCAM_SCL_1V8", + "AP_I2C_UCAM_SDA_1V8", + "AP_I2C_WCAM_SCL_1V8", + "AP_I2C_WCAM_SDA_1V8", + "SCP_I2C_SENSOR_SCL_1V8", + "SCP_I2C_SENSOR_SDA_1V8", + "AP_EC_WARM_RST_REQ", + "AP_XHCI_INIT_DONE", + "USB3_HUB_RST_L", + "EN_SPKR", + "BEEP_ON", + "AP_EDP_BKLTEN", + "EN_PP3300_DISP_X", + "EN_PP3300_SDBRDG_X", + "BT_KILL_1V8_L", + "WIFI_KILL_1V8_L", + "PWRAP_SPI0_CSN", + "PWRAP_SPI0_CK", + "PWRAP_SPI0_MO", + "PWRAP_SPI0_MI", + "SRCLKENA0", + "SRCLKENA1", + "SCP_VREQ_VAO", + "AP_RTC_CLK32K", + "AP_PMIC_WDTRST_L", + "AUD_CLK_MOSI", + "AUD_SYNC_MOSI", + "AUD_DAT_MOSI0", + "AUD_DAT_MOSI1", + "AUD_CLK_MISO", + "AUD_SYNC_MISO", + "AUD_DAT_MISO0", + "AUD_DAT_MISO1", + "NC", + "NC", + "DPBRDG_PWREN", + "DPBRDG_RST_L", + "LTE_W_DISABLE_L", + "LTE_SAR_DETECT_L", + "EN_PP3300_LTE_X", + "LTE_PWR_OFF_L", + "LTE_RESET_L", + "TP", + "TP"; + + aud_clk_mosi_off: aud-clk-mosi-off-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>, + <PINMUX_GPIO167__FUNC_GPIO167>; + input-enable; + bias-pull-down; + }; + }; + + aud_clk_mosi_on: aud-clk-mosi-on-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>, + <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>; + }; + }; + + aud_clk_miso_off: aud-clk-miso-off-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO170__FUNC_GPIO170>, + <PINMUX_GPIO171__FUNC_GPIO171>; + input-enable; + bias-pull-down; + }; + }; + + aud_clk_miso_on: aud-clk-miso-on-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>, + <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>; + }; + }; + + aud_dat_mosi_off: aud-dat-mosi-off-pins { + pins-dat { + pinmux = <PINMUX_GPIO168__FUNC_GPIO168>, + <PINMUX_GPIO169__FUNC_GPIO169>; + input-enable; + bias-pull-down; + }; + }; + + aud_dat_mosi_on: aud-dat-mosi-on-pins { + pins-dat { + pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>, + <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>; + }; + }; + + aud_dat_miso_off: aud-dat-miso-off-pins { + pins-dat { + pinmux = <PINMUX_GPIO172__FUNC_GPIO172>, + <PINMUX_GPIO173__FUNC_GPIO173>; + input-enable; + bias-pull-down; + }; + }; + + aud_dat_miso_on: aud-dat-miso-on-pins { + pins-dat { + pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>, + <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>; + input-schmitt-enable; + bias-disable; + }; + }; + + aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins { + pins-sdata { + pinmux = <PINMUX_GPIO3__FUNC_GPIO3>; + }; + }; + + aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins { + pins-sdata { + pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>; + }; + }; + + aud_gpio_i2s1_off: aud-gpio-i2s-off-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO56__FUNC_GPIO56>, + <PINMUX_GPIO57__FUNC_GPIO57>, + <PINMUX_GPIO58__FUNC_GPIO58>, + <PINMUX_GPIO59__FUNC_GPIO59>; + output-low; + }; + }; + + aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>, + <PINMUX_GPIO57__FUNC_I2S1_BCK>, + <PINMUX_GPIO58__FUNC_I2S1_LRCK>, + <PINMUX_GPIO59__FUNC_I2S1_MCK>; + }; + }; + + aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO26__FUNC_GPIO26>, + <PINMUX_GPIO27__FUNC_GPIO27>; + output-low; + }; + }; + + aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins { + pins-clk { + pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>, + <PINMUX_GPIO27__FUNC_I2S2_LRCK>; + drive-strength = <4>; + }; + }; + + aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins { + pins-sdata { + pinmux = <PINMUX_GPIO4__FUNC_GPIO4>; + output-low; + }; + }; + + aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins { + pins-sdata { + pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>; + drive-strength = <4>; + }; + }; + + aud_gpio_pcm_off: aud-gpio-pcm-off-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO115__FUNC_GPIO115>, + <PINMUX_GPIO116__FUNC_GPIO116>, + <PINMUX_GPIO117__FUNC_GPIO117>, + <PINMUX_GPIO118__FUNC_GPIO118>; + output-low; + }; + }; + + aud_gpio_pcm_on: aud-gpio-pcm-on-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>, + <PINMUX_GPIO116__FUNC_PCM_SYNC>, + <PINMUX_GPIO117__FUNC_PCM_DI>, + <PINMUX_GPIO118__FUNC_PCM_DO>; + }; + }; + + aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins { + pins { + pinmux = <PINMUX_GPIO23__FUNC_GPIO23>; + output-low; + }; + }; + + bt_pins_reset: bt-reset-pins { + pins-bt-reset { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + output-high; + }; + }; + + dpi_pins_sleep: dpi-sleep-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO103__FUNC_GPIO103>, + <PINMUX_GPIO104__FUNC_GPIO104>, + <PINMUX_GPIO105__FUNC_GPIO105>, + <PINMUX_GPIO106__FUNC_GPIO106>, + <PINMUX_GPIO107__FUNC_GPIO107>, + <PINMUX_GPIO108__FUNC_GPIO108>, + <PINMUX_GPIO109__FUNC_GPIO109>, + <PINMUX_GPIO110__FUNC_GPIO110>, + <PINMUX_GPIO111__FUNC_GPIO111>, + <PINMUX_GPIO112__FUNC_GPIO112>, + <PINMUX_GPIO113__FUNC_GPIO113>, + <PINMUX_GPIO114__FUNC_GPIO114>, + <PINMUX_GPIO101__FUNC_GPIO101>, + <PINMUX_GPIO100__FUNC_GPIO100>, + <PINMUX_GPIO102__FUNC_GPIO102>, + <PINMUX_GPIO99__FUNC_GPIO99>; + drive-strength = <10>; + output-low; + }; + }; + + dpi_pins_default: dpi-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>, + <PINMUX_GPIO104__FUNC_DPI_DATA1>, + <PINMUX_GPIO105__FUNC_DPI_DATA2>, + <PINMUX_GPIO106__FUNC_DPI_DATA3>, + <PINMUX_GPIO107__FUNC_DPI_DATA4>, + <PINMUX_GPIO108__FUNC_DPI_DATA5>, + <PINMUX_GPIO109__FUNC_DPI_DATA6>, + <PINMUX_GPIO110__FUNC_DPI_DATA7>, + <PINMUX_GPIO111__FUNC_DPI_DATA8>, + <PINMUX_GPIO112__FUNC_DPI_DATA9>, + <PINMUX_GPIO113__FUNC_DPI_DATA10>, + <PINMUX_GPIO114__FUNC_DPI_DATA11>, + <PINMUX_GPIO101__FUNC_DPI_HSYNC>, + <PINMUX_GPIO100__FUNC_DPI_VSYNC>, + <PINMUX_GPIO102__FUNC_DPI_DE>, + <PINMUX_GPIO99__FUNC_DPI_PCLK>; + drive-strength = <10>; + }; + }; + + ec_ap_int: cros-ec-int-pins { + pins-ec-ap-int-odl { + pinmux = <PINMUX_GPIO13__FUNC_GPIO13>; + input-enable; + }; + }; + + edp_panel_fixed_pins: edp-panel-fixed-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO153__FUNC_GPIO153>; + output-high; + }; + }; + + en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO39__FUNC_GPIO39>; + output-low; + }; + }; + + gsc_int: gsc-int-pins { + pins-gsc-ap-int-odl { + pinmux = <PINMUX_GPIO15__FUNC_GPIO15>; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO128__FUNC_SDA0>, + <PINMUX_GPIO127__FUNC_SCL0>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c1_pins: i2c1-pins { + pins-bus { + pinmux = <PINMUX_GPIO130__FUNC_SDA1>, + <PINMUX_GPIO129__FUNC_SCL1>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO132__FUNC_SDA2>, + <PINMUX_GPIO131__FUNC_SCL2>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c3_pins: i2c3-pins { + pins-bus { + pinmux = <PINMUX_GPIO134__FUNC_SDA3>, + <PINMUX_GPIO133__FUNC_SCL3>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c5_pins: i2c5-pins { + pins-bus { + pinmux = <PINMUX_GPIO138__FUNC_SDA5>, + <PINMUX_GPIO137__FUNC_SCL5>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + it6505_pins: it6505-pins { + pins-hpd { + pinmux = <PINMUX_GPIO10__FUNC_GPIO10>; + input-enable; + bias-pull-up; + }; + + pins-int { + pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; + input-enable; + bias-pull-up; + }; + + pins-reset { + pinmux = <PINMUX_GPIO177__FUNC_GPIO177>; + output-low; + bias-pull-up; + }; + }; + + mmc0_pins_default: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO72__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO73__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO74__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO75__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO76__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO77__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO78__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO69__FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO72__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO73__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO74__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO75__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO76__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO77__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO78__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO69__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_pins_default: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO87__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO88__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO89__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO85__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_pins_uhs: mmc1-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO87__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO88__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO89__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO85__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_pins_eint: mmc1-eint-pins { + pins-dat1 { + pinmux = <PINMUX_GPIO87__FUNC_GPIO87>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-default-pins { + pins-clk-dat { + pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>, + <PINMUX_GPIO61__FUNC_SPINOR_CK>, + <PINMUX_GPIO64__FUNC_SPINOR_IO1>; + drive-strength = <6>; + bias-pull-down; + }; + + pins-cs-dat { + pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>, + <PINMUX_GPIO65__FUNC_SPINOR_IO2>, + <PINMUX_GPIO66__FUNC_SPINOR_IO3>; + drive-strength = <6>; + bias-pull-up; + }; + }; + + pen_eject: pen-eject-pins { + pins { + pinmux = <PINMUX_GPIO18__FUNC_GPIO18>; + input-enable; + /* External pull-up. */ + bias-disable; + }; + }; + + pwm0_pin: disp-pwm-pins { + pins { + pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>; + output-high; + }; + }; + + rt1019p_pins_default: rt1019p-default-pins { + pins-sdb { + pinmux = <PINMUX_GPIO150__FUNC_GPIO150>; + output-low; + }; + }; + + scp_pins: scp-default-pins { + pins-scp-uart { + pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>, + <PINMUX_GPIO49__FUNC_TP_UTXD2_AO>; + }; + }; + + spi1_pins: spi1-pins { + pins-bus { + pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>, + <PINMUX_GPIO41__FUNC_SPI1_CSB_A>, + <PINMUX_GPIO42__FUNC_SPI1_MO_A>, + <PINMUX_GPIO43__FUNC_SPI1_MI_A>; + bias-disable; + input-enable; + }; + }; + + spi2_pins: spi2-pins { + pins-bus { + pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>, + <PINMUX_GPIO45__FUNC_GPIO45>, + <PINMUX_GPIO46__FUNC_SPI2_MO_A>, + <PINMUX_GPIO47__FUNC_SPI2_MI_A>; + bias-disable; + input-enable; + }; + }; + + spmi_pins: spmi-pins { + pins-bus { + pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>, + <PINMUX_GPIO184__FUNC_SPMI_SDA>; + }; + }; + + touchscreen_pins: touchscreen-pins { + pins-irq { + pinmux = <PINMUX_GPIO12__FUNC_GPIO12>; + input-enable; + bias-pull-up; + }; + + pins-reset { + pinmux = <PINMUX_GPIO60__FUNC_GPIO60>; + output-high; + }; + + pins-report-sw { + pinmux = <PINMUX_GPIO37__FUNC_GPIO37>; + output-low; + }; + }; + + trackpad_pin: trackpad-default-pins { + pins-int-n { + pinmux = <PINMUX_GPIO11__FUNC_GPIO11>; + input-enable; + bias-disable; /* pulled externally */ + }; + }; + + wifi_enable_pin: wifi-enable-pins { + pins-wifi-enable { + pinmux = <PINMUX_GPIO54__FUNC_GPIO54>; + }; + }; + + wifi_wakeup_pin: wifi-wakeup-pins { + pins-wifi-wakeup { + pinmux = <PINMUX_GPIO7__FUNC_GPIO7>; + input-enable; + }; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +&pwrap { + pmic { + compatible = "mediatek,mt6366", "mediatek,mt6358"; + interrupt-controller; + interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + + mt6366codec: codec { + compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound"; + Avdd-supply = <&mt6366_vaud28_reg>; + mediatek,dmic-mode = <1>; /* one-wire */ + }; + + mt6366_regulators: regulators { + compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator"; + vsys-ldo1-supply = <&pp4200_z2>; + vsys-ldo2-supply = <&pp4200_z2>; + vsys-ldo3-supply = <&pp4200_z2>; + vsys-vcore-supply = <&pp4200_z2>; + vsys-vdram1-supply = <&pp4200_z2>; + vsys-vgpu-supply = <&pp4200_z2>; + vsys-vmodem-supply = <&pp4200_z2>; + vsys-vpa-supply = <&pp4200_z2>; + vsys-vproc11-supply = <&pp4200_z2>; + vsys-vproc12-supply = <&pp4200_z2>; + vsys-vs1-supply = <&pp4200_z2>; + vsys-vs2-supply = <&pp4200_z2>; + vs1-ldo1-supply = <&mt6366_vs1_reg>; + vs2-ldo1-supply = <&mt6366_vdram1_reg>; + vs2-ldo2-supply = <&mt6366_vs2_reg>; + vs2-ldo3-supply = <&mt6366_vs2_reg>; + + vcore { + regulator-name = "pp0750_dvdd_core"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vdram1_reg: vdram1 { + regulator-name = "pp1125_emi_vdd2"; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vgpu_reg: vgpu { + /* + * Called "ppvar_dvdd_gpu" in the schematic. + * Called "ppvar_dvdd_vgpu" here to match + * regulator coupling requirements. + */ + regulator-name = "ppvar_dvdd_vgpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-coupled-with = <&mt6366_vsram_gpu_reg>; + regulator-coupled-max-spread = <10000>; + }; + + mt6366_vproc11_reg: vproc11 { + regulator-name = "ppvar_dvdd_proc_bc_mt6366"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vproc12_reg: vproc12 { + regulator-name = "ppvar_dvdd_proc_lc"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vs1_reg: vs1 { + regulator-name = "pp2000_vs1"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6366_vs2_reg: vs2 { + regulator-name = "pp1350_vs2"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + va12 { + regulator-name = "pp1200_va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6366_vaud28_reg: vaud28 { + regulator-name = "pp2800_vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vaux18_reg: vaux18 { + regulator-name = "pp1840_vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1840000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vbif28_reg: vbif28 { + regulator-name = "pp2800_vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vcn18_reg: vcn18 { + regulator-name = "pp1800_vcn18_x"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vcn28_reg: vcn28 { + regulator-name = "pp2800_vcn28_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vefuse_reg: vefuse { + regulator-name = "pp1800_vefuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vfe28_reg: vfe28 { + regulator-name = "pp2800_vfe28_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vemc_reg: vemc { + regulator-name = "pp3000_vemc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vibr_reg: vibr { + regulator-name = "pp2800_vibr_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vio18_reg: vio18 { + regulator-name = "pp1800_vio18_s3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <2700>; + regulator-always-on; + }; + + mt6366_vio28_reg: vio28 { + regulator-name = "pp2800_vio28_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vm18_reg: vm18 { + regulator-name = "pp1800_emi_vdd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1840000>; + regulator-enable-ramp-delay = <325>; + regulator-always-on; + }; + + mt6366_vmc_reg: vmc { + regulator-name = "pp3000_vmc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vmddr_reg: vmddr { + regulator-name = "pm0750_emi_vmddr"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <750000>; + regulator-enable-ramp-delay = <325>; + regulator-always-on; + }; + + mt6366_vmch_reg: vmch { + regulator-name = "pp3000_vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vcn33_reg: vcn33 { + regulator-name = "pp3300_vcn33_x"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <270>; + }; + + vdram2 { + regulator-name = "pp0600_emi_vddq"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-enable-ramp-delay = <3300>; + regulator-always-on; + }; + + mt6366_vrf12_reg: vrf12 { + regulator-name = "pp1200_vrf12_x"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6366_vrf18_reg: vrf18 { + regulator-name = "pp1800_vrf18_x"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <120>; + }; + + vsim1 { + regulator-name = "pp1860_vsim1_x"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1860000>; + regulator-enable-ramp-delay = <540>; + }; + + mt6366_vsim2_reg: vsim2 { + regulator-name = "pp2760_vsim2_x"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2760000>; + regulator-enable-ramp-delay = <540>; + }; + + mt6366_vsram_gpu_reg: vsram-gpu { + regulator-name = "pp0900_dvdd_sram_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-coupled-with = <&mt6366_vgpu_reg>; + regulator-coupled-max-spread = <10000>; + }; + + mt6366_vsram_others_reg: vsram-others { + regulator-name = "pp0900_dvdd_sram_core"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6366_vsram_proc11_reg: vsram-proc11 { + regulator-name = "pp0900_dvdd_sram_bc"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1120000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6366_vsram_proc12_reg: vsram-proc12 { + regulator-name = "pp0900_dvdd_sram_lc"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1120000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + vusb { + regulator-name = "pp3070_vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3070000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + vxo22 { + regulator-name = "pp2240_vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2240000>; + regulator-enable-ramp-delay = <120>; + /* Feeds DCXO internally */ + regulator-always-on; + }; + }; + + rtc { + compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc"; + }; + }; +}; + +&scp { + pinctrl-names = "default"; + pinctrl-0 = <&scp_pins>; + firmware-name = "mediatek/mt8186/scp.img"; + memory-region = <&scp_mem>; + status = "okay"; + + cros-ec-rpmsg { + compatible = "google,cros-ec-rpmsg"; + mediatek,rpmsg-name = "cros-ec-rpmsg"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int>; + spi-max-frequency = <1000000>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>; + mediatek,pad-select = <0>; + status = "okay"; + + tpm@0 { + compatible = "google,cr50"; + reg = <0>; + interrupts-extended = <&pio 15 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsc_int>; + spi-max-frequency = <1000000>; + }; +}; + +&ssusb0 { + status = "okay"; +}; + +&ssusb1 { + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb_host0 { + vbus-supply = <&pp3300_s3>; + status = "okay"; +}; + +&usb_host1 { + vbus-supply = <&usb_p1_vbus>; + status = "okay"; +}; + +&watchdog { + mediatek,reset-by-toprgu; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> diff --git a/dts/src/arm64/mediatek/mt8186.dtsi b/dts/src/arm64/mediatek/mt8186.dtsi index 2fec6fd1c1..4763ed5dc8 100644 --- a/dts/src/arm64/mediatek/mt8186.dtsi +++ b/dts/src/arm64/mediatek/mt8186.dtsi @@ -931,11 +931,17 @@ power-domain@MT8186_POWER_DOMAIN_SSUSB { reg = <MT8186_POWER_DOMAIN_SSUSB>; + clocks = <&topckgen CLK_TOP_USB_TOP>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>; + clock-names = "sys_ck", "ref_ck"; #power-domain-cells = <0>; }; power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 { reg = <MT8186_POWER_DOMAIN_SSUSB_P1>; + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>; + clock-names = "sys_ck", "ref_ck"; #power-domain-cells = <0>; }; @@ -1061,7 +1067,7 @@ reg = <MT8186_POWER_DOMAIN_VENC>; clocks = <&topckgen CLK_TOP_VENC>, <&vencsys CLK_VENC_CKE1_VENC>; - clock-names = "venc0", "larb"; + clock-names = "venc0", "subsys-larb"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; }; @@ -1530,8 +1536,9 @@ clocks = <&topckgen CLK_TOP_USB_TOP>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>, - <&infracfg_ao CLK_INFRA_AO_ICUSB>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + <&infracfg_ao CLK_INFRA_AO_ICUSB>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>; phys = <&u2port0 PHY_TYPE_USB2>; power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>; @@ -1595,8 +1602,9 @@ clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>, - <&clk26m>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + <&clk26m>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>; phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>; @@ -1672,6 +1680,10 @@ reg = <0x59c 0x4>; bits = <0 3>; }; + + socinfo-data1@7a0 { + reg = <0x7a0 0x4>; + }; }; mipi_tx0: dsi-phy@11cc0000 { @@ -1959,6 +1971,43 @@ power-domains = <&spm MT8186_POWER_DOMAIN_IMG2>; }; + video_decoder: video-decoder@16000000 { + compatible = "mediatek,mt8186-vcodec-dec"; + reg = <0 0x16000000 0 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>; + mediatek,scp = <&scp>; + + vcodec_core: video-codec@16025000 { + compatible = "mediatek,mtk-vcodec-core"; + reg = <0 0x16025000 0 0x1000>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PP_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_RD_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_WR_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PPWRAP_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_TILE_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD2_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_AVC_MV_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_ENC_EXT>, + <&iommu_mm IOMMU_PORT_L4_HW_VDEC_RG_CTRL_DMA_EXT>; + clocks = <&topckgen CLK_TOP_VDEC>, + <&vdecsys CLK_VDEC_CKEN>, + <&vdecsys CLK_VDEC_LARB1_CKEN>, + <&topckgen CLK_TOP_UNIVPLL_D3>; + clock-names = "vdec-sel", "vdec-soc-vdec", "vdec", "vdec-top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>; + power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>; + }; + }; + larb4: smi@1602e000 { compatible = "mediatek,mt8186-smi-larb"; reg = <0 0x1602e000 0 0x1000>; @@ -1993,6 +2042,40 @@ power-domains = <&spm MT8186_POWER_DOMAIN_VENC>; }; + venc: video-encoder@17020000 { + compatible = "mediatek,mt8186-vcodec-enc", "mediatek,mt8183-vcodec-enc"; + reg = <0 0x17020000 0 0x2000>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu_mm IOMMU_PORT_L7_VENC_RCPU>, + <&iommu_mm IOMMU_PORT_L7_VENC_REC>, + <&iommu_mm IOMMU_PORT_L7_VENC_BSDMA>, + <&iommu_mm IOMMU_PORT_L7_VENC_SV_COMV>, + <&iommu_mm IOMMU_PORT_L7_VENC_RD_COMV>, + <&iommu_mm IOMMU_PORT_L7_VENC_CUR_LUMA>, + <&iommu_mm IOMMU_PORT_L7_VENC_CUR_CHROMA>, + <&iommu_mm IOMMU_PORT_L7_VENC_REF_LUMA>, + <&iommu_mm IOMMU_PORT_L7_VENC_REF_CHROMA>; + clocks = <&vencsys CLK_VENC_CKE1_VENC>; + clock-names = "venc_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>; + power-domains = <&spm MT8186_POWER_DOMAIN_VENC>; + mediatek,scp = <&scp>; + }; + + jpgenc: jpeg-encoder@17030000 { + compatible = "mediatek,mt8186-jpgenc", "mediatek,mtk-jpgenc"; + reg = <0 0x17030000 0 0x10000>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_CKE2_JPGENC>; + clock-names = "jpgenc"; + iommus = <&iommu_mm IOMMU_PORT_L7_JPGENC_Y_RDMA>, + <&iommu_mm IOMMU_PORT_L7_JPGENC_C_RDMA>, + <&iommu_mm IOMMU_PORT_L7_JPGENC_Q_TABLE>, + <&iommu_mm IOMMU_PORT_L7_JPGENC_BSDMA>; + power-domains = <&spm MT8186_POWER_DOMAIN_VENC>; + }; + camsys: clock-controller@1a000000 { compatible = "mediatek,mt8186-camsys"; reg = <0 0x1a000000 0 0x1000>; diff --git a/dts/src/arm64/mediatek/mt8192-asurada.dtsi b/dts/src/arm64/mediatek/mt8192-asurada.dtsi index d87aab8d7a..9b738f6a5d 100644 --- a/dts/src/arm64/mediatek/mt8192-asurada.dtsi +++ b/dts/src/arm64/mediatek/mt8192-asurada.dtsi @@ -1332,14 +1332,11 @@ spi-max-frequency = <3000000>; pinctrl-names = "default"; pinctrl-0 = <&cros_ec_int>; + wakeup-source; #address-cells = <1>; #size-cells = <0>; - base_detection: cbas { - compatible = "google,cros-cbas"; - }; - cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; diff --git a/dts/src/arm64/mediatek/mt8192.dtsi b/dts/src/arm64/mediatek/mt8192.dtsi index 6dd32dbfb8..05e401670b 100644 --- a/dts/src/arm64/mediatek/mt8192.dtsi +++ b/dts/src/arm64/mediatek/mt8192.dtsi @@ -1164,6 +1164,14 @@ #address-cells = <1>; #size-cells = <1>; + socinfo-data1@44 { + reg = <0x044 0x4>; + }; + + socinfo-data2@50 { + reg = <0x050 0x4>; + }; + lvts_e_data1: data1@1c0 { reg = <0x1c0 0x58>; }; @@ -1814,7 +1822,7 @@ mediatek,scp = <&scp>; power-domains = <&spm MT8192_POWER_DOMAIN_VENC>; clocks = <&vencsys CLK_VENC_SET1_VENC>; - clock-names = "venc-set1"; + clock-names = "venc_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>; }; diff --git a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts index 2d5e8f371b..a82d716f10 100644 --- a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts +++ b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts @@ -23,3 +23,7 @@ &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +}; diff --git a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts index 2586c32ce6..2fe20e0dad 100644 --- a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts +++ b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts @@ -43,3 +43,7 @@ &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +}; diff --git a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts index f54f9477b9..dd294ca981 100644 --- a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts +++ b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts @@ -44,3 +44,7 @@ &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +}; diff --git a/dts/src/arm64/mediatek/mt8195-cherry.dtsi b/dts/src/arm64/mediatek/mt8195-cherry.dtsi index 3c6079edda..f94c07f8b9 100644 --- a/dts/src/arm64/mediatek/mt8195-cherry.dtsi +++ b/dts/src/arm64/mediatek/mt8195-cherry.dtsi @@ -1149,6 +1149,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cros_ec_int>; spi-max-frequency = <3000000>; + wakeup-source; keyboard-backlight { compatible = "google,cros-kbd-led-backlight"; @@ -1291,11 +1292,32 @@ status = "okay"; }; +/* + * For the USB Type-C ports the role and alternate modes switching is + * done by the EC so we set dr_mode to host to avoid interfering. + */ +&ssusb0 { + dr_mode = "host"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb2 { + dr_mode = "host"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb3 { + dr_mode = "host"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + &xhci0 { status = "okay"; rx-fifo-depth = <3072>; - vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; }; @@ -1309,8 +1331,6 @@ &xhci2 { status = "okay"; - - vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; }; @@ -1319,7 +1339,6 @@ /* MT7921's USB Bluetooth has issues with USB2 LPM */ usb2-lpm-disable; - vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; }; diff --git a/dts/src/arm64/mediatek/mt8195-demo.dts b/dts/src/arm64/mediatek/mt8195-demo.dts index 4127cb84eb..b82f7176b4 100644 --- a/dts/src/arm64/mediatek/mt8195-demo.dts +++ b/dts/src/arm64/mediatek/mt8195-demo.dts @@ -529,8 +529,22 @@ status = "okay"; }; -&xhci0 { +&ssusb0 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb2 { vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci0 { vbus-supply = <&otg_vbus_regulator>; status = "okay"; }; @@ -541,11 +555,9 @@ }; &xhci2 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; &xhci3 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt8195-evb.dts b/dts/src/arm64/mediatek/mt8195-evb.dts index 690dc7717f..341b6e0741 100644 --- a/dts/src/arm64/mediatek/mt8195-evb.dts +++ b/dts/src/arm64/mediatek/mt8195-evb.dts @@ -160,6 +160,18 @@ status = "okay"; }; +&ssusb0 { + status = "okay"; +}; + +&ssusb2 { + status = "okay"; +}; + +&ssusb3 { + status = "okay"; +}; + &xhci0 { status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt8195.dtsi b/dts/src/arm64/mediatek/mt8195.dtsi index b9101662ce..ea6dc220e1 100644 --- a/dts/src/arm64/mediatek/mt8195.dtsi +++ b/dts/src/arm64/mediatek/mt8195.dtsi @@ -1347,29 +1347,40 @@ }; }; - xhci0: usb@11200000 { - compatible = "mediatek,mt8195-xhci", - "mediatek,mtk-xhci"; - reg = <0 0x11200000 0 0x1000>, - <0 0x11203e00 0 0x0100>; + ssusb0: usb@11201000 { + compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3"; + reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>; reg-names = "mac", "ippc"; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>; - phys = <&u2port0 PHY_TYPE_USB2>, - <&u3port0 PHY_TYPE_USB3>; - assigned-clocks = <&topckgen CLK_TOP_USB_TOP>, - <&topckgen CLK_TOP_SSUSB_XHCI>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, - <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + ranges = <0 0 0 0x11200000 0 0x3f00>; + #address-cells = <2>; + #size-cells = <2>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>, <&topckgen CLK_TOP_SSUSB_REF>, - <&apmixedsys CLK_APMIXED_USB1PLL>, - <&clk26m>, <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", - "xhci_ck"; - mediatek,syscon-wakeup = <&pericfg 0x400 103>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x400 103>; status = "disabled"; + + xhci0: usb@0 { + compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci"; + reg = <0 0 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP>, + <&topckgen CLK_TOP_SSUSB_XHCI>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>, + <&topckgen CLK_TOP_SSUSB_REF>, + <&apmixedsys CLK_APMIXED_USB1PLL>, + <&clk26m>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; + status = "disabled"; + }; }; mmc0: mmc@11230000 { @@ -1450,52 +1461,68 @@ status = "disabled"; }; - xhci2: usb@112a0000 { - compatible = "mediatek,mt8195-xhci", - "mediatek,mtk-xhci"; - reg = <0 0x112a0000 0 0x1000>, - <0 0x112a3e00 0 0x0100>; + ssusb2: usb@112a1000 { + compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3"; + reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>; reg-names = "mac", "ippc"; - interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>; - phys = <&u2port2 PHY_TYPE_USB2>; - assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>, - <&topckgen CLK_TOP_SSUSB_XHCI_2P>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, - <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + ranges = <0 0 0 0x112a0000 0 0x3f00>; + #address-cells = <2>; + #size-cells = <2>; + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, <&topckgen CLK_TOP_SSUSB_P2_REF>, - <&clk26m>, - <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", - "xhci_ck"; - mediatek,syscon-wakeup = <&pericfg 0x400 105>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + phys = <&u2port2 PHY_TYPE_USB2>; wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x400 105>; status = "disabled"; + + xhci2: usb@0 { + compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci"; + reg = <0 0 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; + clock-names = "sys_ck"; + status = "disabled"; + }; }; - xhci3: usb@112b0000 { - compatible = "mediatek,mt8195-xhci", - "mediatek,mtk-xhci"; - reg = <0 0x112b0000 0 0x1000>, - <0 0x112b3e00 0 0x0100>; + ssusb3: usb@112b1000 { + compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3"; + reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>; reg-names = "mac", "ippc"; - interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>; - phys = <&u2port3 PHY_TYPE_USB2>; - assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>, - <&topckgen CLK_TOP_SSUSB_XHCI_3P>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, - <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + ranges = <0 0 0 0x112b0000 0 0x3f00>; + #address-cells = <2>; + #size-cells = <2>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, <&topckgen CLK_TOP_SSUSB_P3_REF>, - <&clk26m>, - <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", - "xhci_ck"; - mediatek,syscon-wakeup = <&pericfg 0x400 106>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + phys = <&u2port3 PHY_TYPE_USB2>; wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x400 106>; status = "disabled"; + + xhci3: usb@0 { + compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci"; + reg = <0 0 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; + clock-names = "sys_ck"; + status = "disabled"; + }; }; pcie0: pcie@112f0000 { @@ -1701,6 +1728,9 @@ svs_calib_data: svs-calib@580 { reg = <0x580 0x64>; }; + socinfo-data1@7a0 { + reg = <0x7a0 0x4>; + }; }; u3phy2: t-phy@11c40000 { diff --git a/dts/src/arm64/mediatek/mt8395-genio-1200-evk.dts b/dts/src/arm64/mediatek/mt8395-genio-1200-evk.dts index 7fc515a07c..1558649f63 100644 --- a/dts/src/arm64/mediatek/mt8395-genio-1200-evk.dts +++ b/dts/src/arm64/mediatek/mt8395-genio-1200-evk.dts @@ -880,6 +880,21 @@ status = "disabled"; }; +&ssusb0 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + &xhci0 { status = "okay"; }; @@ -890,11 +905,9 @@ }; &xhci2 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; &xhci3 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt8395-radxa-nio-12l.dts b/dts/src/arm64/mediatek/mt8395-radxa-nio-12l.dts new file mode 100644 index 0000000000..e5d9b671a4 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8395-radxa-nio-12l.dts @@ -0,0 +1,825 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 Radxa Limited + * Copyright (C) 2024 Collabora Ltd. + * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + */ + +#include "mt8195.dtsi" +#include "mt6359.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/usb/pd.h> + +/ { + model = "Radxa NIO 12L"; + chassis-type = "embedded"; + compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + i2c2 = &i2c4; + i2c3 = &i2c0; + i2c4 = &i2c1; + ethernet0 = ð + serial0 = &uart0; + serial1 = &uart1; + spi0 = &spi1; + spi1 = &spi2; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0x1 0x0>; + }; + + wifi_vreg: regulator-wifi-3v3-en { + compatible = "regulator-fixed"; + regulator-name = "wifi_3v3_en"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 67 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_vreg_pins>; + vin-supply = <&vsys>; + }; + + /* system wide switching 5.0V power rail */ + vsys: regulator-vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_vsys>; + }; + + vsys_buck: regulator-vsys-buck { + compatible = "regulator-fixed"; + regulator-name = "vsys_buck"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_vsys>; + }; + + /* Rail from power-only "TYPE C DC" port */ + vcc5v0_vsys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + reg = <0 0x43200000 0 0xc00000>; + no-map; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + vpu_mem: memory@53000000 { + compatible = "shared-dma-pool"; + reg = <0 0x53000000 0 0x1400000>; /* 20 MB */ + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_mem: memory@54600000 { + reg = <0 0x54600000 0x0 0x200000>; + no-map; + }; + + afe_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0x1100000>; + no-map; + }; + + apu_mem: memory@62000000 { + compatible = "shared-dma-pool"; + reg = <0 0x62000000 0 0x1400000>; /* 20 MB */ + }; + }; +}; + +ð { + phy-mode = "rgmii-rxid"; + phy-handle = <&rgmii_phy>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + mediatek,tx-delay-ps = <2030>; + mediatek,mac-wol; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 20000 100000>; + status = "okay"; + + mdio { + rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; + }; +}; + +&gpu { + mali-supply = <&mt6315_7_vbuck1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + status = "okay"; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + + mode-switch; + orientation-switch; + + vcc-supply = <&mt6359_vibr_ldo_reg>; + + port { + it5205_sbu_mux: endpoint { + remote-endpoint = <&typec_con_mux>; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* I2C4 exposed at 39-pins MIPI-LCD connector */ +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + status = "okay"; + + mt6360: pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + pinctrl-0 = <&mt6360_pins>; + + charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN1-supply = <&vsys_buck>; + LDO_VIN3-supply = <&mt6360_buck2>; + + mt6360_buck1: buck1 { + regulator-name = "emi_vdd2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_buck2: buck2 { + regulator-name = "emi_vddq"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_ldo1: ldo1 { + regulator-name = "ext_lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + + mt6360_ldo2: ldo2 { + regulator-name = "panel1_p1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo3: ldo3 { + regulator-name = "vmc_pmu"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo5: ldo5 { + regulator-name = "vmch_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + + mt6360_ldo6: ldo6 { + regulator-name = "mt6360_ldo6"; /* Test point */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo7: ldo7 { + regulator-name = "emi_vmddr_en"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + }; + + typec { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + op-sink-microwatt = <10000000>; + power-role = "dual"; + try-power-role = "sink"; + + source-pdos = <PDO_FIXED(5000, 1000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + typec_con_hs: endpoint { + remote-endpoint = <&mtu3_hs0_role_sw>; + }; + }; + + port@2 { + reg = <2>; + typec_con_mux: endpoint { + remote-endpoint = <&it5205_sbu_mux>; + }; + }; + }; + }; + }; + }; +}; + +/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */ +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + hs400-ds-delay = <0x14c11>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sdio; + no-sd; + non-removable; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + status = "okay"; +}; + +/* MMC1 Controller: MicroSD card slot */ +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>; + pinctrl-1 = <&mmc1_default_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; +}; + +&mt6359_vaud18_ldo_reg { + regulator-always-on; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +/* For USB Hub */ +&mt6359_vcamio_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc1_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc2_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsram_md_ldo_reg { + regulator-always-on; +}; + +/* for GPU SRAM */ +&mt6359_vsram_others_ldo_reg { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; +}; + +&pio { + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO86__FUNC_GBE_RXC>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>; + drive-strength = <8>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + + pins-rst { + pinmux = <PINMUX_GPIO93__FUNC_GPIO93>; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <8>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO86__FUNC_GPIO86>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO88__FUNC_GPIO88>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + bias-disable; + input-disable; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, + <PINMUX_GPIO13__FUNC_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength = <6>; + drive-strength-microamp = <1000>; + }; + }; + + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO16__FUNC_SDA4>, + <PINMUX_GPIO17__FUNC_SCL4>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + drive-strength = <6>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + drive-strength = <6>; + input-enable; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + drive-strength = <6>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + drive-strength = <8>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + drive-strength = <8>; + input-enable; + }; + + pins-ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + drive-strength = <8>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + drive-strength = <8>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + drive-strength = <8>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + drive-strength = <8>; + input-enable; + }; + }; + + mmc1_pins_detect: mmc1-detect-pins { + pins-insert { + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>; + bias-pull-up; + }; + }; + + mt6360_pins: mt6360-pins { + pins-irq { + pinmux = <PINMUX_GPIO100__FUNC_GPIO100>, + <PINMUX_GPIO101__FUNC_GPIO101>; + input-enable; + bias-pull-up; + }; + }; + + pcie0_default_pins: pcie0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, + <PINMUX_GPIO20__FUNC_PERSTN>, + <PINMUX_GPIO21__FUNC_CLKREQN>; + bias-pull-up; + }; + }; + + pcie1_default_pins: pcie1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>, + <PINMUX_GPIO1__FUNC_CLKREQN_1>, + <PINMUX_GPIO2__FUNC_WAKEN_1>; + bias-disable; + }; + }; + + spi1_pins: spi1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>, + <PINMUX_GPIO137__FUNC_SPIM1_CLK>, + <PINMUX_GPIO138__FUNC_SPIM1_MO>, + <PINMUX_GPIO139__FUNC_SPIM1_MI>; + bias-disable; + }; + }; + + spi2_pins: spi2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, + <PINMUX_GPIO141__FUNC_SPIM2_CLK>, + <PINMUX_GPIO142__FUNC_SPIM2_MO>, + <PINMUX_GPIO143__FUNC_SPIM2_MI>; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + pins-bus { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins-bus { + pinmux = <PINMUX_GPIO102__FUNC_UTXD1>, + <PINMUX_GPIO103__FUNC_URXD1>; + }; + }; + + wifi_vreg_pins: wifi-vreg-pins { + pins-wifi-pmu-en { + pinmux = <PINMUX_GPIO65__FUNC_GPIO65>; + output-high; + }; + + pins-wifi-vreg-en { + pinmux = <PINMUX_GPIO67__FUNC_GPIO67>; + }; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_pins>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_pins>; + status = "okay"; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem>; + status = "okay"; +}; + +&spi1 { + /* Exposed at 40 pin connector */ + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&spi2 { + /* Exposed at 40 pin connector */ + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315_6: pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315_7: pmic@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vgpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + }; + }; +}; + +&uart0 { + /* Exposed at 40 pin connector */ + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + /* Exposed at 40 pin connector */ + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ssusb0 { + role-switch-default-mode = "host"; + usb-role-switch; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; + + port { + mtu3_hs0_role_sw: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&ssusb2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci0 { + vbus-supply = <&otg_vbus_regulator>; + status = "okay"; +}; + +&xhci1 { + /* MT7921's USB Bluetooth has issues with USB2 LPM */ + usb2-lpm-disable; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&vsys>; + status = "okay"; +}; + +&xhci2 { + vbus-supply = <&vsys>; + status = "okay"; +}; diff --git a/dts/src/arm64/nvidia/tegra132-norrin.dts b/dts/src/arm64/nvidia/tegra132-norrin.dts index bbc2e9bef0..14d58859bb 100644 --- a/dts/src/arm64/nvidia/tegra132-norrin.dts +++ b/dts/src/arm64/nvidia/tegra132-norrin.dts @@ -762,6 +762,7 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; reg = <0>; + wakeup-source; google,cros-ec-spi-msg-delay = <2000>; diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi index 5b59c1986e..e8b296d9e0 100644 --- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi @@ -53,6 +53,56 @@ status = "okay"; }; + i2c@c240000 { + status = "okay"; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "GPU"; + shunt-resistor-micro-ohms = <5000>; + }; + input@1 { + reg = <0x1>; + label = "CPU"; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "SOC"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + + power-sensor@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "CV"; + shunt-resistor-micro-ohms = <5000>; + }; + input@1 { + reg = <0x1>; + label = "VDDRQ"; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "SYS5V"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; + serial@3110000 { status = "okay"; }; diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts index 64a3398fe7..c32876699a 100644 --- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -2062,8 +2062,15 @@ ports { usb2-0 { - mode = "host"; + mode = "otg"; + usb-role-switch; status = "okay"; + + port { + hs_typec_p0: endpoint { + remote-endpoint = <&hs_ucsi_ccg_p0>; + }; + }; }; usb2-1 { @@ -2094,6 +2101,14 @@ }; }; + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-0", "usb3-0"; + }; + usb@3610000 { status = "okay"; @@ -2106,6 +2121,40 @@ phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3"; }; + i2c@c240000 { + typec@8 { + compatible = "cypress,cypd4226"; + reg = <0x08>; + interrupt-parent = <&gpio_aon>; + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>; + firmware-name = "nvidia,jetson-agx-xavier"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + ccg_typec_con0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hs_ucsi_ccg_p0: endpoint { + remote-endpoint = <&hs_typec_p0>; + }; + }; + }; + }; + }; + }; + i2c@c250000 { status = "okay"; diff --git a/dts/src/arm64/nvidia/tegra194-p3668.dtsi b/dts/src/arm64/nvidia/tegra194-p3668.dtsi index 58f190b0f8..59860d19f0 100644 --- a/dts/src/arm64/nvidia/tegra194-p3668.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p3668.dtsi @@ -50,6 +50,33 @@ status = "okay"; }; + i2c@c250000 { + status = "okay"; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <5000>; + }; + input@1 { + reg = <0x1>; + label = "VDD_CPU_GPU_CV"; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "VDD_SOC"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; + serial@3100000 { status = "okay"; }; diff --git a/dts/src/arm64/nvidia/tegra234-p3701.dtsi b/dts/src/arm64/nvidia/tegra234-p3701.dtsi index db6ef71167..320c8e9b06 100644 --- a/dts/src/arm64/nvidia/tegra234-p3701.dtsi +++ b/dts/src/arm64/nvidia/tegra234-p3701.dtsi @@ -3,6 +3,11 @@ / { compatible = "nvidia,p3701", "nvidia,tegra234"; + aliases { + mmc0 = "/bus@0/mmc@3460000"; + mmc1 = "/bus@0/mmc@3400000"; + }; + bus@0 { aconnect@2900000 { status = "okay"; @@ -12,1970 +17,22 @@ i2s@2901000 { status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s1_cif: endpoint { - remote-endpoint = <&xbar_i2s1>; - }; - }; - - i2s1_port: port@1 { - reg = <1>; - - i2s1_dap: endpoint { - dai-format = "i2s"; - /* placeholder for external codec */ - }; - }; - }; }; i2s@2901100 { status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s2_cif: endpoint { - remote-endpoint = <&xbar_i2s2>; - }; - }; - - i2s2_port: port@1 { - reg = <1>; - - i2s2_dap: endpoint { - dai-format = "i2s"; - /* placeholder for external codec */ - }; - }; - }; }; i2s@2901300 { status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s4_cif: endpoint { - remote-endpoint = <&xbar_i2s4>; - }; - }; - - i2s4_port: port@1 { - reg = <1>; - - i2s4_dap: endpoint { - dai-format = "i2s"; - /* placeholder for external codec */ - }; - }; - }; }; i2s@2901500 { status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s6_cif: endpoint { - remote-endpoint = <&xbar_i2s6>; - }; - }; - - i2s6_port: port@1 { - reg = <1>; - - i2s6_dap: endpoint { - dai-format = "i2s"; - /* placeholder for external codec */ - }; - }; - }; - }; - - sfc@2902000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc1_cif_in: endpoint { - remote-endpoint = <&xbar_sfc1_in>; - }; - }; - - sfc1_out_port: port@1 { - reg = <1>; - - sfc1_cif_out: endpoint { - remote-endpoint = <&xbar_sfc1_out>; - }; - }; - }; - }; - - sfc@2902200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc2_cif_in: endpoint { - remote-endpoint = <&xbar_sfc2_in>; - }; - }; - - sfc2_out_port: port@1 { - reg = <1>; - - sfc2_cif_out: endpoint { - remote-endpoint = <&xbar_sfc2_out>; - }; - }; - }; - }; - - sfc@2902400 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc3_cif_in: endpoint { - remote-endpoint = <&xbar_sfc3_in>; - }; - }; - - sfc3_out_port: port@1 { - reg = <1>; - - sfc3_cif_out: endpoint { - remote-endpoint = <&xbar_sfc3_out>; - }; - }; - }; - }; - - sfc@2902600 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc4_cif_in: endpoint { - remote-endpoint = <&xbar_sfc4_in>; - }; - }; - - sfc4_out_port: port@1 { - reg = <1>; - - sfc4_cif_out: endpoint { - remote-endpoint = <&xbar_sfc4_out>; - }; - }; - }; - }; - - amx@2903000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx1_in1: endpoint { - remote-endpoint = <&xbar_amx1_in1>; - }; - }; - - port@1 { - reg = <1>; - - amx1_in2: endpoint { - remote-endpoint = <&xbar_amx1_in2>; - }; - }; - - port@2 { - reg = <2>; - - amx1_in3: endpoint { - remote-endpoint = <&xbar_amx1_in3>; - }; - }; - - port@3 { - reg = <3>; - - amx1_in4: endpoint { - remote-endpoint = <&xbar_amx1_in4>; - }; - }; - - amx1_out_port: port@4 { - reg = <4>; - - amx1_out: endpoint { - remote-endpoint = <&xbar_amx1_out>; - }; - }; - }; - }; - - amx@2903100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx2_in1: endpoint { - remote-endpoint = <&xbar_amx2_in1>; - }; - }; - - port@1 { - reg = <1>; - - amx2_in2: endpoint { - remote-endpoint = <&xbar_amx2_in2>; - }; - }; - - port@2 { - reg = <2>; - - amx2_in3: endpoint { - remote-endpoint = <&xbar_amx2_in3>; - }; - }; - - port@3 { - reg = <3>; - - amx2_in4: endpoint { - remote-endpoint = <&xbar_amx2_in4>; - }; - }; - - amx2_out_port: port@4 { - reg = <4>; - - amx2_out: endpoint { - remote-endpoint = <&xbar_amx2_out>; - }; - }; - }; - }; - - amx@2903200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx3_in1: endpoint { - remote-endpoint = <&xbar_amx3_in1>; - }; - }; - - port@1 { - reg = <1>; - - amx3_in2: endpoint { - remote-endpoint = <&xbar_amx3_in2>; - }; - }; - - port@2 { - reg = <2>; - - amx3_in3: endpoint { - remote-endpoint = <&xbar_amx3_in3>; - }; - }; - - port@3 { - reg = <3>; - - amx3_in4: endpoint { - remote-endpoint = <&xbar_amx3_in4>; - }; - }; - - amx3_out_port: port@4 { - reg = <4>; - - amx3_out: endpoint { - remote-endpoint = <&xbar_amx3_out>; - }; - }; - }; - }; - - amx@2903300 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx4_in1: endpoint { - remote-endpoint = <&xbar_amx4_in1>; - }; - }; - - port@1 { - reg = <1>; - - amx4_in2: endpoint { - remote-endpoint = <&xbar_amx4_in2>; - }; - }; - - port@2 { - reg = <2>; - - amx4_in3: endpoint { - remote-endpoint = <&xbar_amx4_in3>; - }; - }; - - port@3 { - reg = <3>; - - amx4_in4: endpoint { - remote-endpoint = <&xbar_amx4_in4>; - }; - }; - - amx4_out_port: port@4 { - reg = <4>; - - amx4_out: endpoint { - remote-endpoint = <&xbar_amx4_out>; - }; - }; - }; - }; - - adx@2903800 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx1_in: endpoint { - remote-endpoint = <&xbar_adx1_in>; - }; - }; - - adx1_out1_port: port@1 { - reg = <1>; - - adx1_out1: endpoint { - remote-endpoint = <&xbar_adx1_out1>; - }; - }; - - adx1_out2_port: port@2 { - reg = <2>; - - adx1_out2: endpoint { - remote-endpoint = <&xbar_adx1_out2>; - }; - }; - - adx1_out3_port: port@3 { - reg = <3>; - - adx1_out3: endpoint { - remote-endpoint = <&xbar_adx1_out3>; - }; - }; - - adx1_out4_port: port@4 { - reg = <4>; - - adx1_out4: endpoint { - remote-endpoint = <&xbar_adx1_out4>; - }; - }; - }; - }; - - adx@2903900 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx2_in: endpoint { - remote-endpoint = <&xbar_adx2_in>; - }; - }; - - adx2_out1_port: port@1 { - reg = <1>; - - adx2_out1: endpoint { - remote-endpoint = <&xbar_adx2_out1>; - }; - }; - - adx2_out2_port: port@2 { - reg = <2>; - - adx2_out2: endpoint { - remote-endpoint = <&xbar_adx2_out2>; - }; - }; - - adx2_out3_port: port@3 { - reg = <3>; - - adx2_out3: endpoint { - remote-endpoint = <&xbar_adx2_out3>; - }; - }; - - adx2_out4_port: port@4 { - reg = <4>; - - adx2_out4: endpoint { - remote-endpoint = <&xbar_adx2_out4>; - }; - }; - }; - }; - - adx@2903a00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx3_in: endpoint { - remote-endpoint = <&xbar_adx3_in>; - }; - }; - - adx3_out1_port: port@1 { - reg = <1>; - - adx3_out1: endpoint { - remote-endpoint = <&xbar_adx3_out1>; - }; - }; - - adx3_out2_port: port@2 { - reg = <2>; - - adx3_out2: endpoint { - remote-endpoint = <&xbar_adx3_out2>; - }; - }; - - adx3_out3_port: port@3 { - reg = <3>; - - adx3_out3: endpoint { - remote-endpoint = <&xbar_adx3_out3>; - }; - }; - - adx3_out4_port: port@4 { - reg = <4>; - - adx3_out4: endpoint { - remote-endpoint = <&xbar_adx3_out4>; - }; - }; - }; - }; - - adx@2903b00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx4_in: endpoint { - remote-endpoint = <&xbar_adx4_in>; - }; - }; - - adx4_out1_port: port@1 { - reg = <1>; - - adx4_out1: endpoint { - remote-endpoint = <&xbar_adx4_out1>; - }; - }; - - adx4_out2_port: port@2 { - reg = <2>; - - adx4_out2: endpoint { - remote-endpoint = <&xbar_adx4_out2>; - }; - }; - - adx4_out3_port: port@3 { - reg = <3>; - - adx4_out3: endpoint { - remote-endpoint = <&xbar_adx4_out3>; - }; - }; - - adx4_out4_port: port@4 { - reg = <4>; - - adx4_out4: endpoint { - remote-endpoint = <&xbar_adx4_out4>; - }; - }; - }; }; dmic@2904200 { status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic3_cif: endpoint { - remote-endpoint = <&xbar_dmic3>; - }; - }; - - dmic3_port: port@1 { - reg = <1>; - - dmic3_dap: endpoint { - /* placeholder for external codec */ - }; - }; - }; - }; - - processing-engine@2908000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - ope1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_ope1_in_ep>; - }; - }; - - ope1_out_port: port@1 { - reg = <0x1>; - - ope1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_ope1_out_ep>; - }; - }; - }; - }; - - mvc@290a000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc1_cif_in: endpoint { - remote-endpoint = <&xbar_mvc1_in>; - }; - }; - - mvc1_out_port: port@1 { - reg = <1>; - - mvc1_cif_out: endpoint { - remote-endpoint = <&xbar_mvc1_out>; - }; - }; - }; - }; - - mvc@290a200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc2_cif_in: endpoint { - remote-endpoint = <&xbar_mvc2_in>; - }; - }; - - mvc2_out_port: port@1 { - reg = <1>; - - mvc2_cif_out: endpoint { - remote-endpoint = <&xbar_mvc2_out>; - }; - }; - }; - }; - - amixer@290bb00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - mix_in1: endpoint { - remote-endpoint = <&xbar_mix_in1>; - }; - }; - - port@1 { - reg = <0x1>; - - mix_in2: endpoint { - remote-endpoint = <&xbar_mix_in2>; - }; - }; - - port@2 { - reg = <0x2>; - - mix_in3: endpoint { - remote-endpoint = <&xbar_mix_in3>; - }; - }; - - port@3 { - reg = <0x3>; - - mix_in4: endpoint { - remote-endpoint = <&xbar_mix_in4>; - }; - }; - - port@4 { - reg = <0x4>; - - mix_in5: endpoint { - remote-endpoint = <&xbar_mix_in5>; - }; - }; - - port@5 { - reg = <0x5>; - - mix_in6: endpoint { - remote-endpoint = <&xbar_mix_in6>; - }; - }; - - port@6 { - reg = <0x6>; - - mix_in7: endpoint { - remote-endpoint = <&xbar_mix_in7>; - }; - }; - - port@7 { - reg = <0x7>; - - mix_in8: endpoint { - remote-endpoint = <&xbar_mix_in8>; - }; - }; - - port@8 { - reg = <0x8>; - - mix_in9: endpoint { - remote-endpoint = <&xbar_mix_in9>; - }; - }; - - port@9 { - reg = <0x9>; - - mix_in10: endpoint { - remote-endpoint = <&xbar_mix_in10>; - }; - }; - - mix_out1_port: port@a { - reg = <0xa>; - - mix_out1: endpoint { - remote-endpoint = <&xbar_mix_out1>; - }; - }; - - mix_out2_port: port@b { - reg = <0xb>; - - mix_out2: endpoint { - remote-endpoint = <&xbar_mix_out2>; - }; - }; - - mix_out3_port: port@c { - reg = <0xc>; - - mix_out3: endpoint { - remote-endpoint = <&xbar_mix_out3>; - }; - }; - - mix_out4_port: port@d { - reg = <0xd>; - - mix_out4: endpoint { - remote-endpoint = <&xbar_mix_out4>; - }; - }; - - mix_out5_port: port@e { - reg = <0xe>; - - mix_out5: endpoint { - remote-endpoint = <&xbar_mix_out5>; - }; - }; - }; - }; - - admaif@290f000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - admaif0_port: port@0 { - reg = <0x0>; - - admaif0: endpoint { - remote-endpoint = <&xbar_admaif0>; - }; - }; - - admaif1_port: port@1 { - reg = <0x1>; - - admaif1: endpoint { - remote-endpoint = <&xbar_admaif1>; - }; - }; - - admaif2_port: port@2 { - reg = <0x2>; - - admaif2: endpoint { - remote-endpoint = <&xbar_admaif2>; - }; - }; - - admaif3_port: port@3 { - reg = <0x3>; - - admaif3: endpoint { - remote-endpoint = <&xbar_admaif3>; - }; - }; - - admaif4_port: port@4 { - reg = <0x4>; - - admaif4: endpoint { - remote-endpoint = <&xbar_admaif4>; - }; - }; - - admaif5_port: port@5 { - reg = <0x5>; - - admaif5: endpoint { - remote-endpoint = <&xbar_admaif5>; - }; - }; - - admaif6_port: port@6 { - reg = <0x6>; - - admaif6: endpoint { - remote-endpoint = <&xbar_admaif6>; - }; - }; - - admaif7_port: port@7 { - reg = <0x7>; - - admaif7: endpoint { - remote-endpoint = <&xbar_admaif7>; - }; - }; - - admaif8_port: port@8 { - reg = <0x8>; - - admaif8: endpoint { - remote-endpoint = <&xbar_admaif8>; - }; - }; - - admaif9_port: port@9 { - reg = <0x9>; - - admaif9: endpoint { - remote-endpoint = <&xbar_admaif9>; - }; - }; - - admaif10_port: port@a { - reg = <0xa>; - - admaif10: endpoint { - remote-endpoint = <&xbar_admaif10>; - }; - }; - - admaif11_port: port@b { - reg = <0xb>; - - admaif11: endpoint { - remote-endpoint = <&xbar_admaif11>; - }; - }; - - admaif12_port: port@c { - reg = <0xc>; - - admaif12: endpoint { - remote-endpoint = <&xbar_admaif12>; - }; - }; - - admaif13_port: port@d { - reg = <0xd>; - - admaif13: endpoint { - remote-endpoint = <&xbar_admaif13>; - }; - }; - - admaif14_port: port@e { - reg = <0xe>; - - admaif14: endpoint { - remote-endpoint = <&xbar_admaif14>; - }; - }; - - admaif15_port: port@f { - reg = <0xf>; - - admaif15: endpoint { - remote-endpoint = <&xbar_admaif15>; - }; - }; - - admaif16_port: port@10 { - reg = <0x10>; - - admaif16: endpoint { - remote-endpoint = <&xbar_admaif16>; - }; - }; - - admaif17_port: port@11 { - reg = <0x11>; - - admaif17: endpoint { - remote-endpoint = <&xbar_admaif17>; - }; - }; - - admaif18_port: port@12 { - reg = <0x12>; - - admaif18: endpoint { - remote-endpoint = <&xbar_admaif18>; - }; - }; - - admaif19_port: port@13 { - reg = <0x13>; - - admaif19: endpoint { - remote-endpoint = <&xbar_admaif19>; - }; - }; - }; - }; - - asrc@2910000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - asrc_in1_ep: endpoint { - remote-endpoint = <&xbar_asrc_in1_ep>; - }; - }; - - port@1 { - reg = <0x1>; - - asrc_in2_ep: endpoint { - remote-endpoint = <&xbar_asrc_in2_ep>; - }; - }; - - port@2 { - reg = <0x2>; - - asrc_in3_ep: endpoint { - remote-endpoint = <&xbar_asrc_in3_ep>; - }; - }; - - port@3 { - reg = <0x3>; - - asrc_in4_ep: endpoint { - remote-endpoint = <&xbar_asrc_in4_ep>; - }; - }; - - port@4 { - reg = <0x4>; - - asrc_in5_ep: endpoint { - remote-endpoint = <&xbar_asrc_in5_ep>; - }; - }; - - port@5 { - reg = <0x5>; - - asrc_in6_ep: endpoint { - remote-endpoint = <&xbar_asrc_in6_ep>; - }; - }; - - port@6 { - reg = <0x6>; - - asrc_in7_ep: endpoint { - remote-endpoint = <&xbar_asrc_in7_ep>; - }; - }; - - asrc_out1_port: port@7 { - reg = <0x7>; - - asrc_out1_ep: endpoint { - remote-endpoint = <&xbar_asrc_out1_ep>; - }; - }; - - asrc_out2_port: port@8 { - reg = <0x8>; - - asrc_out2_ep: endpoint { - remote-endpoint = <&xbar_asrc_out2_ep>; - }; - }; - - asrc_out3_port: port@9 { - reg = <0x9>; - - asrc_out3_ep: endpoint { - remote-endpoint = <&xbar_asrc_out3_ep>; - }; - }; - - asrc_out4_port: port@a { - reg = <0xa>; - - asrc_out4_ep: endpoint { - remote-endpoint = <&xbar_asrc_out4_ep>; - }; - }; - - asrc_out5_port: port@b { - reg = <0xb>; - - asrc_out5_ep: endpoint { - remote-endpoint = <&xbar_asrc_out5_ep>; - }; - }; - - asrc_out6_port: port@c { - reg = <0xc>; - - asrc_out6_ep: endpoint { - remote-endpoint = <&xbar_asrc_out6_ep>; - }; - }; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - xbar_admaif0: endpoint { - remote-endpoint = <&admaif0>; - }; - }; - - port@1 { - reg = <0x1>; - - xbar_admaif1: endpoint { - remote-endpoint = <&admaif1>; - }; - }; - - port@2 { - reg = <0x2>; - - xbar_admaif2: endpoint { - remote-endpoint = <&admaif2>; - }; - }; - - port@3 { - reg = <0x3>; - - xbar_admaif3: endpoint { - remote-endpoint = <&admaif3>; - }; - }; - - port@4 { - reg = <0x4>; - - xbar_admaif4: endpoint { - remote-endpoint = <&admaif4>; - }; - }; - - port@5 { - reg = <0x5>; - - xbar_admaif5: endpoint { - remote-endpoint = <&admaif5>; - }; - }; - - port@6 { - reg = <0x6>; - - xbar_admaif6: endpoint { - remote-endpoint = <&admaif6>; - }; - }; - - port@7 { - reg = <0x7>; - - xbar_admaif7: endpoint { - remote-endpoint = <&admaif7>; - }; - }; - - port@8 { - reg = <0x8>; - - xbar_admaif8: endpoint { - remote-endpoint = <&admaif8>; - }; - }; - - port@9 { - reg = <0x9>; - - xbar_admaif9: endpoint { - remote-endpoint = <&admaif9>; - }; - }; - - port@a { - reg = <0xa>; - - xbar_admaif10: endpoint { - remote-endpoint = <&admaif10>; - }; - }; - - port@b { - reg = <0xb>; - - xbar_admaif11: endpoint { - remote-endpoint = <&admaif11>; - }; - }; - - port@c { - reg = <0xc>; - - xbar_admaif12: endpoint { - remote-endpoint = <&admaif12>; - }; - }; - - port@d { - reg = <0xd>; - - xbar_admaif13: endpoint { - remote-endpoint = <&admaif13>; - }; - }; - - port@e { - reg = <0xe>; - - xbar_admaif14: endpoint { - remote-endpoint = <&admaif14>; - }; - }; - - port@f { - reg = <0xf>; - - xbar_admaif15: endpoint { - remote-endpoint = <&admaif15>; - }; - }; - - port@10 { - reg = <0x10>; - - xbar_admaif16: endpoint { - remote-endpoint = <&admaif16>; - }; - }; - - port@11 { - reg = <0x11>; - - xbar_admaif17: endpoint { - remote-endpoint = <&admaif17>; - }; - }; - - port@12 { - reg = <0x12>; - - xbar_admaif18: endpoint { - remote-endpoint = <&admaif18>; - }; - }; - - port@13 { - reg = <0x13>; - - xbar_admaif19: endpoint { - remote-endpoint = <&admaif19>; - }; - }; - - xbar_i2s1_port: port@14 { - reg = <0x14>; - - xbar_i2s1: endpoint { - remote-endpoint = <&i2s1_cif>; - }; - }; - - xbar_i2s2_port: port@15 { - reg = <0x15>; - - xbar_i2s2: endpoint { - remote-endpoint = <&i2s2_cif>; - }; - }; - - xbar_i2s4_port: port@17 { - reg = <0x17>; - - xbar_i2s4: endpoint { - remote-endpoint = <&i2s4_cif>; - }; - }; - - xbar_i2s6_port: port@19 { - reg = <0x19>; - - xbar_i2s6: endpoint { - remote-endpoint = <&i2s6_cif>; - }; - }; - - xbar_dmic3_port: port@1c { - reg = <0x1c>; - - xbar_dmic3: endpoint { - remote-endpoint = <&dmic3_cif>; - }; - }; - - xbar_sfc1_in_port: port@20 { - reg = <0x20>; - - xbar_sfc1_in: endpoint { - remote-endpoint = <&sfc1_cif_in>; - }; - }; - - port@21 { - reg = <0x21>; - - xbar_sfc1_out: endpoint { - remote-endpoint = <&sfc1_cif_out>; - }; - }; - - xbar_sfc2_in_port: port@22 { - reg = <0x22>; - - xbar_sfc2_in: endpoint { - remote-endpoint = <&sfc2_cif_in>; - }; - }; - - port@23 { - reg = <0x23>; - - xbar_sfc2_out: endpoint { - remote-endpoint = <&sfc2_cif_out>; - }; - }; - - xbar_sfc3_in_port: port@24 { - reg = <0x24>; - - xbar_sfc3_in: endpoint { - remote-endpoint = <&sfc3_cif_in>; - }; - }; - - port@25 { - reg = <0x25>; - - xbar_sfc3_out: endpoint { - remote-endpoint = <&sfc3_cif_out>; - }; - }; - - xbar_sfc4_in_port: port@26 { - reg = <0x26>; - - xbar_sfc4_in: endpoint { - remote-endpoint = <&sfc4_cif_in>; - }; - }; - - port@27 { - reg = <0x27>; - - xbar_sfc4_out: endpoint { - remote-endpoint = <&sfc4_cif_out>; - }; - }; - - xbar_mvc1_in_port: port@28 { - reg = <0x28>; - - xbar_mvc1_in: endpoint { - remote-endpoint = <&mvc1_cif_in>; - }; - }; - - port@29 { - reg = <0x29>; - - xbar_mvc1_out: endpoint { - remote-endpoint = <&mvc1_cif_out>; - }; - }; - - xbar_mvc2_in_port: port@2a { - reg = <0x2a>; - - xbar_mvc2_in: endpoint { - remote-endpoint = <&mvc2_cif_in>; - }; - }; - - port@2b { - reg = <0x2b>; - - xbar_mvc2_out: endpoint { - remote-endpoint = <&mvc2_cif_out>; - }; - }; - - xbar_amx1_in1_port: port@2c { - reg = <0x2c>; - - xbar_amx1_in1: endpoint { - remote-endpoint = <&amx1_in1>; - }; - }; - - xbar_amx1_in2_port: port@2d { - reg = <0x2d>; - - xbar_amx1_in2: endpoint { - remote-endpoint = <&amx1_in2>; - }; - }; - - xbar_amx1_in3_port: port@2e { - reg = <0x2e>; - - xbar_amx1_in3: endpoint { - remote-endpoint = <&amx1_in3>; - }; - }; - - xbar_amx1_in4_port: port@2f { - reg = <0x2f>; - - xbar_amx1_in4: endpoint { - remote-endpoint = <&amx1_in4>; - }; - }; - - port@30 { - reg = <0x30>; - - xbar_amx1_out: endpoint { - remote-endpoint = <&amx1_out>; - }; - }; - - xbar_amx2_in1_port: port@31 { - reg = <0x31>; - - xbar_amx2_in1: endpoint { - remote-endpoint = <&amx2_in1>; - }; - }; - - xbar_amx2_in2_port: port@32 { - reg = <0x32>; - - xbar_amx2_in2: endpoint { - remote-endpoint = <&amx2_in2>; - }; - }; - - xbar_amx2_in3_port: port@33 { - reg = <0x33>; - - xbar_amx2_in3: endpoint { - remote-endpoint = <&amx2_in3>; - }; - }; - - xbar_amx2_in4_port: port@34 { - reg = <0x34>; - - xbar_amx2_in4: endpoint { - remote-endpoint = <&amx2_in4>; - }; - }; - - port@35 { - reg = <0x35>; - - xbar_amx2_out: endpoint { - remote-endpoint = <&amx2_out>; - }; - }; - - xbar_amx3_in1_port: port@36 { - reg = <0x36>; - - xbar_amx3_in1: endpoint { - remote-endpoint = <&amx3_in1>; - }; - }; - - xbar_amx3_in2_port: port@37 { - reg = <0x37>; - - xbar_amx3_in2: endpoint { - remote-endpoint = <&amx3_in2>; - }; - }; - - xbar_amx3_in3_port: port@38 { - reg = <0x38>; - - xbar_amx3_in3: endpoint { - remote-endpoint = <&amx3_in3>; - }; - }; - - xbar_amx3_in4_port: port@39 { - reg = <0x39>; - - xbar_amx3_in4: endpoint { - remote-endpoint = <&amx3_in4>; - }; - }; - - port@3a { - reg = <0x3a>; - - xbar_amx3_out: endpoint { - remote-endpoint = <&amx3_out>; - }; - }; - - xbar_amx4_in1_port: port@3b { - reg = <0x3b>; - - xbar_amx4_in1: endpoint { - remote-endpoint = <&amx4_in1>; - }; - }; - - xbar_amx4_in2_port: port@3c { - reg = <0x3c>; - - xbar_amx4_in2: endpoint { - remote-endpoint = <&amx4_in2>; - }; - }; - - xbar_amx4_in3_port: port@3d { - reg = <0x3d>; - - xbar_amx4_in3: endpoint { - remote-endpoint = <&amx4_in3>; - }; - }; - - xbar_amx4_in4_port: port@3e { - reg = <0x3e>; - - xbar_amx4_in4: endpoint { - remote-endpoint = <&amx4_in4>; - }; - }; - - port@3f { - reg = <0x3f>; - - xbar_amx4_out: endpoint { - remote-endpoint = <&amx4_out>; - }; - }; - - xbar_adx1_in_port: port@40 { - reg = <0x40>; - - xbar_adx1_in: endpoint { - remote-endpoint = <&adx1_in>; - }; - }; - - port@41 { - reg = <0x41>; - - xbar_adx1_out1: endpoint { - remote-endpoint = <&adx1_out1>; - }; - }; - - port@42 { - reg = <0x42>; - - xbar_adx1_out2: endpoint { - remote-endpoint = <&adx1_out2>; - }; - }; - - port@43 { - reg = <0x43>; - - xbar_adx1_out3: endpoint { - remote-endpoint = <&adx1_out3>; - }; - }; - - port@44 { - reg = <0x44>; - - xbar_adx1_out4: endpoint { - remote-endpoint = <&adx1_out4>; - }; - }; - - xbar_adx2_in_port: port@45 { - reg = <0x45>; - - xbar_adx2_in: endpoint { - remote-endpoint = <&adx2_in>; - }; - }; - - port@46 { - reg = <0x46>; - - xbar_adx2_out1: endpoint { - remote-endpoint = <&adx2_out1>; - }; - }; - - port@47 { - reg = <0x47>; - - xbar_adx2_out2: endpoint { - remote-endpoint = <&adx2_out2>; - }; - }; - - port@48 { - reg = <0x48>; - - xbar_adx2_out3: endpoint { - remote-endpoint = <&adx2_out3>; - }; - }; - - port@49 { - reg = <0x49>; - - xbar_adx2_out4: endpoint { - remote-endpoint = <&adx2_out4>; - }; - }; - - xbar_adx3_in_port: port@4a { - reg = <0x4a>; - - xbar_adx3_in: endpoint { - remote-endpoint = <&adx3_in>; - }; - }; - - port@4b { - reg = <0x4b>; - - xbar_adx3_out1: endpoint { - remote-endpoint = <&adx3_out1>; - }; - }; - - port@4c { - reg = <0x4c>; - - xbar_adx3_out2: endpoint { - remote-endpoint = <&adx3_out2>; - }; - }; - - port@4d { - reg = <0x4d>; - - xbar_adx3_out3: endpoint { - remote-endpoint = <&adx3_out3>; - }; - }; - - port@4e { - reg = <0x4e>; - - xbar_adx3_out4: endpoint { - remote-endpoint = <&adx3_out4>; - }; - }; - - xbar_adx4_in_port: port@4f { - reg = <0x4f>; - - xbar_adx4_in: endpoint { - remote-endpoint = <&adx4_in>; - }; - }; - - port@50 { - reg = <0x50>; - - xbar_adx4_out1: endpoint { - remote-endpoint = <&adx4_out1>; - }; - }; - - port@51 { - reg = <0x51>; - - xbar_adx4_out2: endpoint { - remote-endpoint = <&adx4_out2>; - }; - }; - - port@52 { - reg = <0x52>; - - xbar_adx4_out3: endpoint { - remote-endpoint = <&adx4_out3>; - }; - }; - - port@53 { - reg = <0x53>; - - xbar_adx4_out4: endpoint { - remote-endpoint = <&adx4_out4>; - }; - }; - - xbar_mix_in1_port: port@54 { - reg = <0x54>; - - xbar_mix_in1: endpoint { - remote-endpoint = <&mix_in1>; - }; - }; - - xbar_mix_in2_port: port@55 { - reg = <0x55>; - - xbar_mix_in2: endpoint { - remote-endpoint = <&mix_in2>; - }; - }; - - xbar_mix_in3_port: port@56 { - reg = <0x56>; - - xbar_mix_in3: endpoint { - remote-endpoint = <&mix_in3>; - }; - }; - - xbar_mix_in4_port: port@57 { - reg = <0x57>; - - xbar_mix_in4: endpoint { - remote-endpoint = <&mix_in4>; - }; - }; - - xbar_mix_in5_port: port@58 { - reg = <0x58>; - - xbar_mix_in5: endpoint { - remote-endpoint = <&mix_in5>; - }; - }; - - xbar_mix_in6_port: port@59 { - reg = <0x59>; - - xbar_mix_in6: endpoint { - remote-endpoint = <&mix_in6>; - }; - }; - - xbar_mix_in7_port: port@5a { - reg = <0x5a>; - - xbar_mix_in7: endpoint { - remote-endpoint = <&mix_in7>; - }; - }; - - xbar_mix_in8_port: port@5b { - reg = <0x5b>; - - xbar_mix_in8: endpoint { - remote-endpoint = <&mix_in8>; - }; - }; - - xbar_mix_in9_port: port@5c { - reg = <0x5c>; - - xbar_mix_in9: endpoint { - remote-endpoint = <&mix_in9>; - }; - }; - - xbar_mix_in10_port: port@5d { - reg = <0x5d>; - - xbar_mix_in10: endpoint { - remote-endpoint = <&mix_in10>; - }; - }; - - port@5e { - reg = <0x5e>; - - xbar_mix_out1: endpoint { - remote-endpoint = <&mix_out1>; - }; - }; - - port@5f { - reg = <0x5f>; - - xbar_mix_out2: endpoint { - remote-endpoint = <&mix_out2>; - }; - }; - - port@60 { - reg = <0x60>; - - xbar_mix_out3: endpoint { - remote-endpoint = <&mix_out3>; - }; - }; - - port@61 { - reg = <0x61>; - - xbar_mix_out4: endpoint { - remote-endpoint = <&mix_out4>; - }; - }; - - port@62 { - reg = <0x62>; - - xbar_mix_out5: endpoint { - remote-endpoint = <&mix_out5>; - }; - }; - - xbar_asrc_in1_port: port@63 { - reg = <0x63>; - - xbar_asrc_in1_ep: endpoint { - remote-endpoint = <&asrc_in1_ep>; - }; - }; - - port@64 { - reg = <0x64>; - - xbar_asrc_out1_ep: endpoint { - remote-endpoint = <&asrc_out1_ep>; - }; - }; - - xbar_asrc_in2_port: port@65 { - reg = <0x65>; - - xbar_asrc_in2_ep: endpoint { - remote-endpoint = <&asrc_in2_ep>; - }; - }; - - port@66 { - reg = <0x66>; - - xbar_asrc_out2_ep: endpoint { - remote-endpoint = <&asrc_out2_ep>; - }; - }; - - xbar_asrc_in3_port: port@67 { - reg = <0x67>; - - xbar_asrc_in3_ep: endpoint { - remote-endpoint = <&asrc_in3_ep>; - }; - }; - - port@68 { - reg = <0x68>; - - xbar_asrc_out3_ep: endpoint { - remote-endpoint = <&asrc_out3_ep>; - }; - }; - - xbar_asrc_in4_port: port@69 { - reg = <0x69>; - - xbar_asrc_in4_ep: endpoint { - remote-endpoint = <&asrc_in4_ep>; - }; - }; - - port@6a { - reg = <0x6a>; - - xbar_asrc_out4_ep: endpoint { - remote-endpoint = <&asrc_out4_ep>; - }; - }; - - xbar_asrc_in5_port: port@6b { - reg = <0x6b>; - - xbar_asrc_in5_ep: endpoint { - remote-endpoint = <&asrc_in5_ep>; - }; - }; - - port@6c { - reg = <0x6c>; - - xbar_asrc_out5_ep: endpoint { - remote-endpoint = <&asrc_out5_ep>; - }; - }; - - xbar_asrc_in6_port: port@6d { - reg = <0x6d>; - - xbar_asrc_in6_ep: endpoint { - remote-endpoint = <&asrc_in6_ep>; - }; - }; - - port@6e { - reg = <0x6e>; - - xbar_asrc_out6_ep: endpoint { - remote-endpoint = <&asrc_out6_ep>; - }; - }; - - xbar_asrc_in7_port: port@6f { - reg = <0x6f>; - - xbar_asrc_in7_ep: endpoint { - remote-endpoint = <&asrc_in7_ep>; - }; - }; - - xbar_ope1_in_port: port@70 { - reg = <0x70>; - - xbar_ope1_in_ep: endpoint { - remote-endpoint = <&ope1_cif_in_ep>; - }; - }; - - port@71 { - reg = <0x71>; - - xbar_ope1_out_ep: endpoint { - remote-endpoint = <&ope1_cif_out_ep>; - }; - }; }; }; diff --git a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts index 81a82933e3..69db584253 100644 --- a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -12,7 +12,6 @@ compatible = "nvidia,p3737-0000+p3701-0000", "nvidia,p3701-0000", "nvidia,tegra234"; aliases { - mmc3 = "/bus@0/mmc@3460000"; serial0 = &tcu; serial1 = &uarta; }; diff --git a/dts/src/arm64/nvidia/tegra234-p3767-0000.dtsi b/dts/src/arm64/nvidia/tegra234-p3767-0000.dtsi deleted file mode 100644 index baf4f69e41..0000000000 --- a/dts/src/arm64/nvidia/tegra234-p3767-0000.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include "tegra234-p3767.dtsi" - -/ { - compatible = "nvidia,p3767-0000", "nvidia,tegra234"; - model = "NVIDIA Jetson Orin NX"; - - bus@0 { - hda@3510000 { - nvidia,model = "NVIDIA Jetson Orin NX HDA"; - }; - }; -}; diff --git a/dts/src/arm64/nvidia/tegra234-p3767-0005.dtsi b/dts/src/arm64/nvidia/tegra234-p3767-0005.dtsi deleted file mode 100644 index 232fa95ef4..0000000000 --- a/dts/src/arm64/nvidia/tegra234-p3767-0005.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include "tegra234-p3767.dtsi" - -/ { - compatible = "nvidia,p3767-0005", "nvidia,tegra234"; - model = "NVIDIA Jetson Orin Nano"; - - bus@0 { - hda@3510000 { - nvidia,model = "NVIDIA Jetson Orin Nano HDA"; - }; - }; -}; diff --git a/dts/src/arm64/nvidia/tegra234-p3767.dtsi b/dts/src/arm64/nvidia/tegra234-p3767.dtsi index 59c14ded5e..84db7132e8 100644 --- a/dts/src/arm64/nvidia/tegra234-p3767.dtsi +++ b/dts/src/arm64/nvidia/tegra234-p3767.dtsi @@ -5,7 +5,35 @@ / { compatible = "nvidia,p3767", "nvidia,tegra234"; + aliases { + mmc0 = "/bus@0/mmc@3400000"; + }; + bus@0 { + aconnect@2900000 { + status = "okay"; + + ahub@2900800 { + status = "okay"; + + i2s@2901100 { + status = "okay"; + }; + + i2s@2901300 { + status = "okay"; + }; + }; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + i2c@3160000 { status = "okay"; @@ -127,6 +155,64 @@ vin-supply = <&vdd_5v0_sys>; }; + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* ADMAIF (FE) Ports */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* XBAR Ports */ + <&xbar_i2s2_port>, <&xbar_i2s4_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mix_in1_port>, <&xbar_mix_in2_port>, + <&xbar_mix_in3_port>, <&xbar_mix_in4_port>, + <&xbar_mix_in5_port>, <&xbar_mix_in6_port>, + <&xbar_mix_in7_port>, <&xbar_mix_in8_port>, + <&xbar_mix_in9_port>, <&xbar_mix_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>, + <&mix_out4_port>, <&mix_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, + /* BE I/O Ports */ + <&i2s2_port>, <&i2s4_port>; + }; + thermal-zones { tj-thermal { polling-delay = <1000>; diff --git a/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts b/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts index 61b0e69d3d..1607ee1421 100644 --- a/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts +++ b/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -4,7 +4,7 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> -#include "tegra234-p3767-0000.dtsi" +#include "tegra234-p3767.dtsi" #include "tegra234-p3768-0000.dtsi" / { @@ -37,7 +37,6 @@ hda@3510000 { nvidia,model = "NVIDIA Jetson Orin NX HDA"; - status = "okay"; }; padctl@3520000 { @@ -85,6 +84,10 @@ enable-active-high; }; + sound { + label = "NVIDIA Jetson Orin NX APE"; + }; + thermal-zones { tj-thermal { cooling-maps { diff --git a/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts b/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts index 9e9bb9ca8b..dc2d4bef1e 100644 --- a/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts +++ b/dts/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts @@ -4,17 +4,27 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> -#include "tegra234-p3767-0005.dtsi" +#include "tegra234-p3767.dtsi" #include "tegra234-p3768-0000.dtsi" / { compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234"; model = "NVIDIA Jetson Orin Nano Developer Kit"; + bus@0 { + hda@3510000 { + nvidia,model = "NVIDIA Jetson Orin Nano HDA"; + }; + }; + pwm-fan { cooling-levels = <0 88 187 255>; }; + sound { + label = "NVIDIA Jetson Orin Nano APE"; + }; + thermal-zones { tj-thermal { cooling-maps { diff --git a/dts/src/arm64/nvidia/tegra234-sim-vdk.dts b/dts/src/arm64/nvidia/tegra234-sim-vdk.dts index 9f3e9f30c3..292e28376e 100644 --- a/dts/src/arm64/nvidia/tegra234-sim-vdk.dts +++ b/dts/src/arm64/nvidia/tegra234-sim-vdk.dts @@ -8,7 +8,6 @@ compatible = "nvidia,tegra234-vdk", "nvidia,tegra234"; aliases { - mmc3 = "/bus@0/mmc@3460000"; serial0 = &uarta; }; diff --git a/dts/src/arm64/nvidia/tegra234.dtsi b/dts/src/arm64/nvidia/tegra234.dtsi index d1bd328892..78cbfdd98d 100644 --- a/dts/src/arm64/nvidia/tegra234.dtsi +++ b/dts/src/arm64/nvidia/tegra234.dtsi @@ -200,6 +200,28 @@ assigned-clock-rates = <1536000>; sound-name-prefix = "I2S1"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif: endpoint { + remote-endpoint = <&xbar_i2s1>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; }; tegra_i2s2: i2s@2901100 { @@ -214,6 +236,28 @@ assigned-clock-rates = <1536000>; sound-name-prefix = "I2S2"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif: endpoint { + remote-endpoint = <&xbar_i2s2>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; }; tegra_i2s3: i2s@2901200 { @@ -228,6 +272,28 @@ assigned-clock-rates = <1536000>; sound-name-prefix = "I2S3"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif: endpoint { + remote-endpoint = <&xbar_i2s3>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; }; tegra_i2s4: i2s@2901300 { @@ -242,6 +308,28 @@ assigned-clock-rates = <1536000>; sound-name-prefix = "I2S4"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif: endpoint { + remote-endpoint = <&xbar_i2s4>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; }; tegra_i2s5: i2s@2901400 { @@ -256,6 +344,28 @@ assigned-clock-rates = <1536000>; sound-name-prefix = "I2S5"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif: endpoint { + remote-endpoint = <&xbar_i2s5>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; }; tegra_i2s6: i2s@2901500 { @@ -270,6 +380,28 @@ assigned-clock-rates = <1536000>; sound-name-prefix = "I2S6"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif: endpoint { + remote-endpoint = <&xbar_i2s6>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; }; tegra_sfc1: sfc@2902000 { @@ -277,7 +409,27 @@ "nvidia,tegra210-sfc"; reg = <0x0 0x2902000 0x0 0x200>; sound-name-prefix = "SFC1"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in: endpoint { + remote-endpoint = <&xbar_sfc1_in>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out: endpoint { + remote-endpoint = <&xbar_sfc1_out>; + }; + }; + }; }; tegra_sfc2: sfc@2902200 { @@ -285,7 +437,27 @@ "nvidia,tegra210-sfc"; reg = <0x0 0x2902200 0x0 0x200>; sound-name-prefix = "SFC2"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in: endpoint { + remote-endpoint = <&xbar_sfc2_in>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out: endpoint { + remote-endpoint = <&xbar_sfc2_out>; + }; + }; + }; }; tegra_sfc3: sfc@2902400 { @@ -293,7 +465,27 @@ "nvidia,tegra210-sfc"; reg = <0x0 0x2902400 0x0 0x200>; sound-name-prefix = "SFC3"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in: endpoint { + remote-endpoint = <&xbar_sfc3_in>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out: endpoint { + remote-endpoint = <&xbar_sfc3_out>; + }; + }; + }; }; tegra_sfc4: sfc@2902600 { @@ -301,7 +493,27 @@ "nvidia,tegra210-sfc"; reg = <0x0 0x2902600 0x0 0x200>; sound-name-prefix = "SFC4"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in: endpoint { + remote-endpoint = <&xbar_sfc4_in>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out: endpoint { + remote-endpoint = <&xbar_sfc4_out>; + }; + }; + }; }; tegra_amx1: amx@2903000 { @@ -309,7 +521,51 @@ "nvidia,tegra194-amx"; reg = <0x0 0x2903000 0x0 0x100>; sound-name-prefix = "AMX1"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1: endpoint { + remote-endpoint = <&xbar_amx1_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2: endpoint { + remote-endpoint = <&xbar_amx1_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3: endpoint { + remote-endpoint = <&xbar_amx1_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4: endpoint { + remote-endpoint = <&xbar_amx1_in4>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out: endpoint { + remote-endpoint = <&xbar_amx1_out>; + }; + }; + }; }; tegra_amx2: amx@2903100 { @@ -317,7 +573,51 @@ "nvidia,tegra194-amx"; reg = <0x0 0x2903100 0x0 0x100>; sound-name-prefix = "AMX2"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1: endpoint { + remote-endpoint = <&xbar_amx2_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2: endpoint { + remote-endpoint = <&xbar_amx2_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx2_in3: endpoint { + remote-endpoint = <&xbar_amx2_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx2_in4: endpoint { + remote-endpoint = <&xbar_amx2_in4>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out: endpoint { + remote-endpoint = <&xbar_amx2_out>; + }; + }; + }; }; tegra_amx3: amx@2903200 { @@ -325,7 +625,51 @@ "nvidia,tegra194-amx"; reg = <0x0 0x2903200 0x0 0x100>; sound-name-prefix = "AMX3"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1: endpoint { + remote-endpoint = <&xbar_amx3_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2: endpoint { + remote-endpoint = <&xbar_amx3_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3: endpoint { + remote-endpoint = <&xbar_amx3_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4: endpoint { + remote-endpoint = <&xbar_amx3_in4>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out: endpoint { + remote-endpoint = <&xbar_amx3_out>; + }; + }; + }; }; tegra_amx4: amx@2903300 { @@ -333,7 +677,51 @@ "nvidia,tegra194-amx"; reg = <0x0 0x2903300 0x0 0x100>; sound-name-prefix = "AMX4"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1: endpoint { + remote-endpoint = <&xbar_amx4_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2: endpoint { + remote-endpoint = <&xbar_amx4_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3: endpoint { + remote-endpoint = <&xbar_amx4_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4: endpoint { + remote-endpoint = <&xbar_amx4_in4>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out: endpoint { + remote-endpoint = <&xbar_amx4_out>; + }; + }; + }; }; tegra_adx1: adx@2903800 { @@ -341,7 +729,51 @@ "nvidia,tegra210-adx"; reg = <0x0 0x2903800 0x0 0x100>; sound-name-prefix = "ADX1"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in: endpoint { + remote-endpoint = <&xbar_adx1_in>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1: endpoint { + remote-endpoint = <&xbar_adx1_out1>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2: endpoint { + remote-endpoint = <&xbar_adx1_out2>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3: endpoint { + remote-endpoint = <&xbar_adx1_out3>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4: endpoint { + remote-endpoint = <&xbar_adx1_out4>; + }; + }; + }; }; tegra_adx2: adx@2903900 { @@ -349,7 +781,51 @@ "nvidia,tegra210-adx"; reg = <0x0 0x2903900 0x0 0x100>; sound-name-prefix = "ADX2"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in: endpoint { + remote-endpoint = <&xbar_adx2_in>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1: endpoint { + remote-endpoint = <&xbar_adx2_out1>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2: endpoint { + remote-endpoint = <&xbar_adx2_out2>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3: endpoint { + remote-endpoint = <&xbar_adx2_out3>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4: endpoint { + remote-endpoint = <&xbar_adx2_out4>; + }; + }; + }; }; tegra_adx3: adx@2903a00 { @@ -357,7 +833,51 @@ "nvidia,tegra210-adx"; reg = <0x0 0x2903a00 0x0 0x100>; sound-name-prefix = "ADX3"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in: endpoint { + remote-endpoint = <&xbar_adx3_in>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1: endpoint { + remote-endpoint = <&xbar_adx3_out1>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2: endpoint { + remote-endpoint = <&xbar_adx3_out2>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3: endpoint { + remote-endpoint = <&xbar_adx3_out3>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4: endpoint { + remote-endpoint = <&xbar_adx3_out4>; + }; + }; + }; }; tegra_adx4: adx@2903b00 { @@ -365,7 +885,51 @@ "nvidia,tegra210-adx"; reg = <0x0 0x2903b00 0x0 0x100>; sound-name-prefix = "ADX4"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in: endpoint { + remote-endpoint = <&xbar_adx4_in>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1: endpoint { + remote-endpoint = <&xbar_adx4_out1>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2: endpoint { + remote-endpoint = <&xbar_adx4_out2>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3: endpoint { + remote-endpoint = <&xbar_adx4_out3>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4: endpoint { + remote-endpoint = <&xbar_adx4_out4>; + }; + }; + }; }; @@ -380,6 +944,27 @@ assigned-clock-rates = <3072000>; sound-name-prefix = "DMIC1"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif: endpoint { + remote-endpoint = <&xbar_dmic1>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; }; tegra_dmic2: dmic@2904100 { @@ -393,6 +978,27 @@ assigned-clock-rates = <3072000>; sound-name-prefix = "DMIC2"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif: endpoint { + remote-endpoint = <&xbar_dmic2>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; }; tegra_dmic3: dmic@2904200 { @@ -406,6 +1012,27 @@ assigned-clock-rates = <3072000>; sound-name-prefix = "DMIC3"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif: endpoint { + remote-endpoint = <&xbar_dmic3>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; }; tegra_dmic4: dmic@2904300 { @@ -419,6 +1046,27 @@ assigned-clock-rates = <3072000>; sound-name-prefix = "DMIC4"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic4_cif: endpoint { + remote-endpoint = <&xbar_dmic4>; + }; + }; + + dmic4_port: port@1 { + reg = <1>; + + dmic4_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; }; tegra_dspk1: dspk@2905000 { @@ -432,6 +1080,27 @@ assigned-clock-rates = <12288000>; sound-name-prefix = "DSPK1"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif: endpoint { + remote-endpoint = <&xbar_dspk1>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; }; tegra_dspk2: dspk@2905100 { @@ -445,6 +1114,27 @@ assigned-clock-rates = <12288000>; sound-name-prefix = "DSPK2"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif: endpoint { + remote-endpoint = <&xbar_dspk2>; + }; + }; + + dspk2_port: port@1 { + reg = <1>; + + dspk2_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; }; tegra_ope1: processing-engine@2908000 { @@ -452,7 +1142,6 @@ "nvidia,tegra210-ope"; reg = <0x0 0x2908000 0x0 0x100>; sound-name-prefix = "OPE1"; - status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -469,6 +1158,29 @@ "nvidia,tegra210-mbdrc"; reg = <0x0 0x2908200 0x0 0x200>; }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = + <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = + <&xbar_ope1_out_ep>; + }; + }; + }; }; tegra_mvc1: mvc@290a000 { @@ -476,7 +1188,27 @@ "nvidia,tegra210-mvc"; reg = <0x0 0x290a000 0x0 0x200>; sound-name-prefix = "MVC1"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in: endpoint { + remote-endpoint = <&xbar_mvc1_in>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out: endpoint { + remote-endpoint = <&xbar_mvc1_out>; + }; + }; + }; }; tegra_mvc2: mvc@290a200 { @@ -484,7 +1216,27 @@ "nvidia,tegra210-mvc"; reg = <0x0 0x290a200 0x0 0x200>; sound-name-prefix = "MVC2"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in: endpoint { + remote-endpoint = <&xbar_mvc2_in>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out: endpoint { + remote-endpoint = <&xbar_mvc2_out>; + }; + }; + }; }; tegra_amixer: amixer@290bb00 { @@ -492,7 +1244,131 @@ "nvidia,tegra210-amixer"; reg = <0x0 0x290bb00 0x0 0x800>; sound-name-prefix = "MIXER1"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mix_in1: endpoint { + remote-endpoint = <&xbar_mix_in1>; + }; + }; + + port@1 { + reg = <0x1>; + + mix_in2: endpoint { + remote-endpoint = <&xbar_mix_in2>; + }; + }; + + port@2 { + reg = <0x2>; + + mix_in3: endpoint { + remote-endpoint = <&xbar_mix_in3>; + }; + }; + + port@3 { + reg = <0x3>; + + mix_in4: endpoint { + remote-endpoint = <&xbar_mix_in4>; + }; + }; + + port@4 { + reg = <0x4>; + + mix_in5: endpoint { + remote-endpoint = <&xbar_mix_in5>; + }; + }; + + port@5 { + reg = <0x5>; + + mix_in6: endpoint { + remote-endpoint = <&xbar_mix_in6>; + }; + }; + + port@6 { + reg = <0x6>; + + mix_in7: endpoint { + remote-endpoint = <&xbar_mix_in7>; + }; + }; + + port@7 { + reg = <0x7>; + + mix_in8: endpoint { + remote-endpoint = <&xbar_mix_in8>; + }; + }; + + port@8 { + reg = <0x8>; + + mix_in9: endpoint { + remote-endpoint = <&xbar_mix_in9>; + }; + }; + + port@9 { + reg = <0x9>; + + mix_in10: endpoint { + remote-endpoint = <&xbar_mix_in10>; + }; + }; + + mix_out1_port: port@a { + reg = <0xa>; + + mix_out1: endpoint { + remote-endpoint = <&xbar_mix_out1>; + }; + }; + + mix_out2_port: port@b { + reg = <0xb>; + + mix_out2: endpoint { + remote-endpoint = <&xbar_mix_out2>; + }; + }; + + mix_out3_port: port@c { + reg = <0xc>; + + mix_out3: endpoint { + remote-endpoint = <&xbar_mix_out3>; + }; + }; + + mix_out4_port: port@d { + reg = <0xd>; + + mix_out4: endpoint { + remote-endpoint = <&xbar_mix_out4>; + }; + }; + + mix_out5_port: port@e { + reg = <0xe>; + + mix_out5: endpoint { + remote-endpoint = <&xbar_mix_out5>; + }; + }; + }; }; tegra_admaif: admaif@290f000 { @@ -543,7 +1419,171 @@ <&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>; interconnect-names = "dma-mem", "write"; iommus = <&smmu_niso0 TEGRA234_SID_APE>; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0: endpoint { + remote-endpoint = <&xbar_admaif0>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1: endpoint { + remote-endpoint = <&xbar_admaif1>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2: endpoint { + remote-endpoint = <&xbar_admaif2>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3: endpoint { + remote-endpoint = <&xbar_admaif3>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4: endpoint { + remote-endpoint = <&xbar_admaif4>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5: endpoint { + remote-endpoint = <&xbar_admaif5>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6: endpoint { + remote-endpoint = <&xbar_admaif6>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7: endpoint { + remote-endpoint = <&xbar_admaif7>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8: endpoint { + remote-endpoint = <&xbar_admaif8>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9: endpoint { + remote-endpoint = <&xbar_admaif9>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10: endpoint { + remote-endpoint = <&xbar_admaif10>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11: endpoint { + remote-endpoint = <&xbar_admaif11>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12: endpoint { + remote-endpoint = <&xbar_admaif12>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13: endpoint { + remote-endpoint = <&xbar_admaif13>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14: endpoint { + remote-endpoint = <&xbar_admaif14>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15: endpoint { + remote-endpoint = <&xbar_admaif15>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16: endpoint { + remote-endpoint = <&xbar_admaif16>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17: endpoint { + remote-endpoint = <&xbar_admaif17>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18: endpoint { + remote-endpoint = <&xbar_admaif18>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19: endpoint { + remote-endpoint = <&xbar_admaif19>; + }; + }; + }; }; tegra_asrc: asrc@2910000 { @@ -551,7 +1591,1045 @@ "nvidia,tegra186-asrc"; reg = <0x0 0x2910000 0x0 0x2000>; sound-name-prefix = "ASRC1"; - status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out6_ep>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0: endpoint { + remote-endpoint = <&admaif0>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1: endpoint { + remote-endpoint = <&admaif1>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2: endpoint { + remote-endpoint = <&admaif2>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3: endpoint { + remote-endpoint = <&admaif3>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4: endpoint { + remote-endpoint = <&admaif4>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5: endpoint { + remote-endpoint = <&admaif5>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6: endpoint { + remote-endpoint = <&admaif6>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7: endpoint { + remote-endpoint = <&admaif7>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8: endpoint { + remote-endpoint = <&admaif8>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9: endpoint { + remote-endpoint = <&admaif9>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10: endpoint { + remote-endpoint = <&admaif10>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11: endpoint { + remote-endpoint = <&admaif11>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12: endpoint { + remote-endpoint = <&admaif12>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13: endpoint { + remote-endpoint = <&admaif13>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14: endpoint { + remote-endpoint = <&admaif14>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15: endpoint { + remote-endpoint = <&admaif15>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16: endpoint { + remote-endpoint = <&admaif16>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17: endpoint { + remote-endpoint = <&admaif17>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18: endpoint { + remote-endpoint = <&admaif18>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19: endpoint { + remote-endpoint = <&admaif19>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1: endpoint { + remote-endpoint = <&i2s1_cif>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2: endpoint { + remote-endpoint = <&i2s2_cif>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3: endpoint { + remote-endpoint = <&i2s3_cif>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4: endpoint { + remote-endpoint = <&i2s4_cif>; + }; + }; + + xbar_i2s5_port: port@18 { + reg = <0x18>; + + xbar_i2s5: endpoint { + remote-endpoint = <&i2s5_cif>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6: endpoint { + remote-endpoint = <&i2s6_cif>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1: endpoint { + remote-endpoint = <&dmic1_cif>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2: endpoint { + remote-endpoint = <&dmic2_cif>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3: endpoint { + remote-endpoint = <&dmic3_cif>; + }; + }; + + xbar_dmic4_port: port@1d { + reg = <0x1d>; + + xbar_dmic4: endpoint { + remote-endpoint = <&dmic4_cif>; + }; + }; + + xbar_dspk1_port: port@1e { + reg = <0x1e>; + + xbar_dspk1: endpoint { + remote-endpoint = <&dspk1_cif>; + }; + }; + + xbar_dspk2_port: port@1f { + reg = <0x1f>; + + xbar_dspk2: endpoint { + remote-endpoint = <&dspk2_cif>; + }; + }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in: endpoint { + remote-endpoint = <&sfc1_cif_in>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out: endpoint { + remote-endpoint = <&sfc1_cif_out>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in: endpoint { + remote-endpoint = <&sfc2_cif_in>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out: endpoint { + remote-endpoint = <&sfc2_cif_out>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in: endpoint { + remote-endpoint = <&sfc3_cif_in>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out: endpoint { + remote-endpoint = <&sfc3_cif_out>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in: endpoint { + remote-endpoint = <&sfc4_cif_in>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out: endpoint { + remote-endpoint = <&sfc4_cif_out>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in: endpoint { + remote-endpoint = <&mvc1_cif_in>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out: endpoint { + remote-endpoint = <&mvc1_cif_out>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in: endpoint { + remote-endpoint = <&mvc2_cif_in>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out: endpoint { + remote-endpoint = <&mvc2_cif_out>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1: endpoint { + remote-endpoint = <&amx1_in1>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2: endpoint { + remote-endpoint = <&amx1_in2>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3: endpoint { + remote-endpoint = <&amx1_in3>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4: endpoint { + remote-endpoint = <&amx1_in4>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out: endpoint { + remote-endpoint = <&amx1_out>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1: endpoint { + remote-endpoint = <&amx2_in1>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2: endpoint { + remote-endpoint = <&amx2_in2>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3: endpoint { + remote-endpoint = <&amx2_in3>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4: endpoint { + remote-endpoint = <&amx2_in4>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out: endpoint { + remote-endpoint = <&amx2_out>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1: endpoint { + remote-endpoint = <&amx3_in1>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2: endpoint { + remote-endpoint = <&amx3_in2>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3: endpoint { + remote-endpoint = <&amx3_in3>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4: endpoint { + remote-endpoint = <&amx3_in4>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out: endpoint { + remote-endpoint = <&amx3_out>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1: endpoint { + remote-endpoint = <&amx4_in1>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2: endpoint { + remote-endpoint = <&amx4_in2>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3: endpoint { + remote-endpoint = <&amx4_in3>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4: endpoint { + remote-endpoint = <&amx4_in4>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out: endpoint { + remote-endpoint = <&amx4_out>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in: endpoint { + remote-endpoint = <&adx1_in>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1: endpoint { + remote-endpoint = <&adx1_out1>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2: endpoint { + remote-endpoint = <&adx1_out2>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3: endpoint { + remote-endpoint = <&adx1_out3>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4: endpoint { + remote-endpoint = <&adx1_out4>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in: endpoint { + remote-endpoint = <&adx2_in>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1: endpoint { + remote-endpoint = <&adx2_out1>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2: endpoint { + remote-endpoint = <&adx2_out2>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3: endpoint { + remote-endpoint = <&adx2_out3>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4: endpoint { + remote-endpoint = <&adx2_out4>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in: endpoint { + remote-endpoint = <&adx3_in>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1: endpoint { + remote-endpoint = <&adx3_out1>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2: endpoint { + remote-endpoint = <&adx3_out2>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3: endpoint { + remote-endpoint = <&adx3_out3>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4: endpoint { + remote-endpoint = <&adx3_out4>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in: endpoint { + remote-endpoint = <&adx4_in>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1: endpoint { + remote-endpoint = <&adx4_out1>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2: endpoint { + remote-endpoint = <&adx4_out2>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3: endpoint { + remote-endpoint = <&adx4_out3>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4: endpoint { + remote-endpoint = <&adx4_out4>; + }; + }; + + xbar_mix_in1_port: port@54 { + reg = <0x54>; + + xbar_mix_in1: endpoint { + remote-endpoint = <&mix_in1>; + }; + }; + + xbar_mix_in2_port: port@55 { + reg = <0x55>; + + xbar_mix_in2: endpoint { + remote-endpoint = <&mix_in2>; + }; + }; + + xbar_mix_in3_port: port@56 { + reg = <0x56>; + + xbar_mix_in3: endpoint { + remote-endpoint = <&mix_in3>; + }; + }; + + xbar_mix_in4_port: port@57 { + reg = <0x57>; + + xbar_mix_in4: endpoint { + remote-endpoint = <&mix_in4>; + }; + }; + + xbar_mix_in5_port: port@58 { + reg = <0x58>; + + xbar_mix_in5: endpoint { + remote-endpoint = <&mix_in5>; + }; + }; + + xbar_mix_in6_port: port@59 { + reg = <0x59>; + + xbar_mix_in6: endpoint { + remote-endpoint = <&mix_in6>; + }; + }; + + xbar_mix_in7_port: port@5a { + reg = <0x5a>; + + xbar_mix_in7: endpoint { + remote-endpoint = <&mix_in7>; + }; + }; + + xbar_mix_in8_port: port@5b { + reg = <0x5b>; + + xbar_mix_in8: endpoint { + remote-endpoint = <&mix_in8>; + }; + }; + + xbar_mix_in9_port: port@5c { + reg = <0x5c>; + + xbar_mix_in9: endpoint { + remote-endpoint = <&mix_in9>; + }; + }; + + xbar_mix_in10_port: port@5d { + reg = <0x5d>; + + xbar_mix_in10: endpoint { + remote-endpoint = <&mix_in10>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mix_out1: endpoint { + remote-endpoint = <&mix_out1>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mix_out2: endpoint { + remote-endpoint = <&mix_out2>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mix_out3: endpoint { + remote-endpoint = <&mix_out3>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mix_out4: endpoint { + remote-endpoint = <&mix_out4>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mix_out5: endpoint { + remote-endpoint = <&mix_out5>; + }; + }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; }; @@ -1461,6 +3539,14 @@ iommus = <&smmu_niso0 TEGRA234_SID_MGBE>; power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>; status = "disabled"; + + snps,axi-config = <&mgbe0_axi_setup>; + + mgbe0_axi_setup: stmmac-axi-config { + snps,blen = <256 128 64 32>; + snps,rd_osr_lmt = <63>; + snps,wr_osr_lmt = <63>; + }; }; ethernet@6900000 { @@ -1495,6 +3581,14 @@ iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>; status = "disabled"; + + snps,axi-config = <&mgbe1_axi_setup>; + + mgbe1_axi_setup: stmmac-axi-config { + snps,blen = <256 128 64 32>; + snps,rd_osr_lmt = <63>; + snps,wr_osr_lmt = <63>; + }; }; ethernet@6a00000 { @@ -1529,6 +3623,14 @@ iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>; power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>; status = "disabled"; + + snps,axi-config = <&mgbe2_axi_setup>; + + mgbe2_axi_setup: stmmac-axi-config { + snps,blen = <256 128 64 32>; + snps,rd_osr_lmt = <63>; + snps,wr_osr_lmt = <63>; + }; }; ethernet@6b00000 { diff --git a/dts/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/dts/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts index c08b4be5cc..f9cbf8c1d6 100644 --- a/dts/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts +++ b/dts/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts @@ -9,7 +9,7 @@ #include "apq8016-sbc.dts" / { - camera_vdddo_1v8: camera-vdddo-1v8 { + camera_vdddo_1v8: regulator-camera-vdddo { compatible = "regulator-fixed"; regulator-name = "camera_vdddo"; regulator-min-microvolt = <1800000>; @@ -17,7 +17,7 @@ regulator-always-on; }; - camera_vdda_2v8: camera-vdda-2v8 { + camera_vdda_2v8: regulator-camera-vdda { compatible = "regulator-fixed"; regulator-name = "camera_vdda"; regulator-min-microvolt = <2800000>; @@ -25,7 +25,7 @@ regulator-always-on; }; - camera_vddd_1v5: camera-vddd-1v5 { + camera_vddd_1v5: regulator-camera-vddd { compatible = "regulator-fixed"; regulator-name = "camera_vddd"; regulator-min-microvolt = <1500000>; @@ -53,7 +53,7 @@ }; &cci_i2c0 { - camera_rear@3b { + camera@3b { compatible = "ovti,ov5640"; reg = <0x3b>; diff --git a/dts/src/arm64/qcom/ipq5332.dtsi b/dts/src/arm64/qcom/ipq5332.dtsi index 42e2e48b2b..770d9c2fb4 100644 --- a/dts/src/arm64/qcom/ipq5332.dtsi +++ b/dts/src/arm64/qcom/ipq5332.dtsi @@ -320,8 +320,12 @@ compatible = "qcom,ipq5332-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; clocks = <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_SNOC_USB_CLK>, diff --git a/dts/src/arm64/qcom/ipq6018.dtsi b/dts/src/arm64/qcom/ipq6018.dtsi index 61c8fd49c9..4e29adea57 100644 --- a/dts/src/arm64/qcom/ipq6018.dtsi +++ b/dts/src/arm64/qcom/ipq6018.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,gcc-ipq6018.h> #include <dt-bindings/reset/qcom,gcc-ipq6018.h> #include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <2>; @@ -43,6 +44,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU1: cpu@1 { @@ -55,6 +57,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU2: cpu@2 { @@ -67,6 +70,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU3: cpu@3 { @@ -79,6 +83,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; L2_0: l2-cache { @@ -330,6 +335,16 @@ clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq6018-tsens", "qcom,ipq8074-tsens"; + reg = <0x0 0x004a9000 0x0 0x1000>, + <0x0 0x004a8000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x00704000 0x0 0x20000>; @@ -418,6 +433,12 @@ <&gcc GCC_USB1_MOCK_UTMI_CLK>; assigned-clock-rates = <133330000>, <24000000>; + + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy"; + resets = <&gcc GCC_USB1_BCR>; status = "disabled"; @@ -578,6 +599,21 @@ status = "disabled"; }; + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078ba000 0x0 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07984000 0x0 0x1a000>; @@ -630,6 +666,13 @@ <133330000>, <24000000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; + resets = <&gcc GCC_USB0_BCR>; status = "disabled"; @@ -867,6 +910,122 @@ }; }; + thermal-zones { + nss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 4>; + + trips { + nss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 5>; + + trips { + nss-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wcss-phya0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 7>; + + trips { + wcss-phya0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wcss-phya1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 8>; + + trips { + wcss-phya1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_alert: cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 14>; + + trips { + lpass-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddrss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 15>; + + trips { + ddrss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi index 26441447c8..e5b89753aa 100644 --- a/dts/src/arm64/qcom/ipq8074.dtsi +++ b/dts/src/arm64/qcom/ipq8074.dtsi @@ -252,6 +252,8 @@ clocks = <&gcc GCC_MDIO_AHB_CLK>; clock-names = "gcc_mdio_ahb_clk"; + clock-frequency = <6250000>; + status = "disabled"; }; @@ -627,6 +629,13 @@ <133330000>, <19200000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; + power-domains = <&gcc USB0_GDSC>; resets = <&gcc GCC_USB0_BCR>; @@ -669,6 +678,13 @@ <133330000>, <19200000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; + power-domains = <&gcc USB1_GDSC>; resets = <&gcc GCC_USB1_BCR>; diff --git a/dts/src/arm64/qcom/ipq9574.dtsi b/dts/src/arm64/qcom/ipq9574.dtsi index 5f83ee42a7..7f2e5cbf3b 100644 --- a/dts/src/arm64/qcom/ipq9574.dtsi +++ b/dts/src/arm64/qcom/ipq9574.dtsi @@ -321,8 +321,10 @@ sdhc_1: mmc@7804000 { compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x07804000 0x1000>, <0x07805000 0x1000>; - reg-names = "hc", "cqhci"; + reg = <0x07804000 0x1000>, + <0x07805000 0x1000>, + <0x07808000 0x2000>; + reg-names = "hc", "cqhci", "ice"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -330,9 +332,11 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board_clk>; - clock-names = "iface", "core", "xo"; + <&xo_board_clk>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; non-removable; + supports-cqe; status = "disabled"; }; diff --git a/dts/src/arm64/qcom/msm8216-samsung-fortuna3g.dts b/dts/src/arm64/qcom/msm8216-samsung-fortuna3g.dts new file mode 100644 index 0000000000..366914be7d --- /dev/null +++ b/dts/src/arm64/qcom/msm8216-samsung-fortuna3g.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-fortuna-common.dtsi" + +/ { + model = "Samsung Galaxy Grand Prime (SM-G530H)"; + compatible = "samsung,fortuna3g", "qcom,msm8916"; + chassis-type = "handset"; +}; diff --git a/dts/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi b/dts/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi new file mode 100644 index 0000000000..c2800ad2dd --- /dev/null +++ b/dts/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85a00000 { + reg = <0x0 0x85a00000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-home { + label = "Home"; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + haptic { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + muic: extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&muic_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupts-extended = <&tlmm 121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fg_alert_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + model = "msm8916-1mic"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + fg_alert_default: fg-alert-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio109"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + motor_en_default: motor-en-default-state { + pins = "gpio72"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + muic_int_default: muic-int-default-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/dts/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts b/dts/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts new file mode 100644 index 0000000000..9d65fa58ba --- /dev/null +++ b/dts/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-fortuna-common.dtsi" + +/ { + model = "Samsung Galaxy Grand Prime (SM-G530W)"; + compatible = "samsung,gprimeltecan", "qcom,msm8916"; + chassis-type = "handset"; + + reserved-memory { + /* Firmware for gprimeltecan needs more space */ + /delete-node/ tz-apps@85a00000; + + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; +}; + +&mpss_mem { + /* Firmware for gprimeltecan needs more space */ + reg = <0x0 0x86800000 0x0 0x5400000>; +}; diff --git a/dts/src/arm64/qcom/msm8916-samsung-grandprimelte.dts b/dts/src/arm64/qcom/msm8916-samsung-grandprimelte.dts new file mode 100644 index 0000000000..a66ce4b135 --- /dev/null +++ b/dts/src/arm64/qcom/msm8916-samsung-grandprimelte.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-fortuna-common.dtsi" + +/ { + model = "Samsung Galaxy Grand Prime (SM-G530FZ)"; + compatible = "samsung,grandprimelte", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&mpss_mem { + /* Firmware for grandprimelte needs more space */ + reg = <0x0 0x86800000 0x0 0x5400000>; +}; diff --git a/dts/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi b/dts/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi new file mode 100644 index 0000000000..42843771ae --- /dev/null +++ b/dts/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-fortuna-common.dtsi" + +/* SM5504 MUIC instead of SM5502 */ +/delete-node/ &muic; + +&blsp_i2c1 { + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&muic_int_default>; + pinctrl-names = "default"; + }; +}; diff --git a/dts/src/arm64/qcom/msm8916-samsung-rossa.dts b/dts/src/arm64/qcom/msm8916-samsung-rossa.dts new file mode 100644 index 0000000000..ebaa13c6b0 --- /dev/null +++ b/dts/src/arm64/qcom/msm8916-samsung-rossa.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-rossa-common.dtsi" + +/ { + model = "Samsung Galaxy Core Prime LTE"; + compatible = "samsung,rossa", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&mpss_mem { + /* Firmware for rossa needs more space */ + reg = <0x0 0x86800000 0x0 0x5800000>; +}; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index e423c57ddd..cedff4166b 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -1785,6 +1785,8 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&gpu_opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + #cooling-cells = <2>; + status = "disabled"; gpu_opp_table: opp-table { @@ -2688,6 +2690,13 @@ thermal-sensors = <&tsens 2>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { gpu_alert0: trip-point0 { temperature = <75000>; diff --git a/dts/src/arm64/qcom/msm8939.dtsi b/dts/src/arm64/qcom/msm8939.dtsi index 82d85ff610..dd45975682 100644 --- a/dts/src/arm64/qcom/msm8939.dtsi +++ b/dts/src/arm64/qcom/msm8939.dtsi @@ -1427,6 +1427,8 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + #cooling-cells = <2>; + status = "disabled"; opp_table: opp-table { @@ -2456,6 +2458,13 @@ thermal-sensors = <&tsens 3>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { gpu_alert0: trip-point0 { temperature = <75000>; @@ -2463,7 +2472,7 @@ type = "passive"; }; - gpu_crit: gpu_crit { + gpu_crit: gpu-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; diff --git a/dts/src/arm64/qcom/msm8953.dtsi b/dts/src/arm64/qcom/msm8953.dtsi index ad2f8cf9c9..f1011bb641 100644 --- a/dts/src/arm64/qcom/msm8953.dtsi +++ b/dts/src/arm64/qcom/msm8953.dtsi @@ -859,6 +859,8 @@ "vsync", "core"; + resets = <&gcc GCC_MDSS_BCR>; + #address-cells = <1>; #size-cells = <1>; ranges; @@ -1044,6 +1046,125 @@ }; }; + gpu: gpu@1c00000 { + compatible = "qcom,adreno-506.0", "qcom,adreno"; + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GCC_OXILI_TIMER_CLK>, + <&gcc GCC_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "rbbmtimer", + "alwayson"; + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&gpu_iommu 0>; + operating-points-v2 = <&gpu_opp_table>; + + #cooling-cells = <2>; + + status = "disabled"; + + zap-shader { + memory-region = <&zap_shader_region>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-133300000 { + opp-hz = /bits/ 64 <133300000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom_plus>; + }; + + /* + * This opp is only available on msm8953 and + * sdm632, the max for sdm450 is 600MHz. + */ + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + gpu_iommu: iommu@1c48000 { + compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2"; + ranges = <0 0x01c48000 0x8000>; + + clocks = <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&gcc OXILI_CX_GDSC>; + + qcom,iommu-secure-id = <18>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* gfx3d_user */ + iommu-ctx@0 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x0000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d_secure */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v2-sec"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01e20000 0x20000>; @@ -1160,9 +1281,12 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -2012,6 +2136,33 @@ }; }; }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 15>; + + trips { + gpu_alert: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; }; timer { diff --git a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi index cbc84459a5..10cd244dea 100644 --- a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi @@ -377,7 +377,7 @@ &blsp2_i2c1 { status = "okay"; - sideinteraction: ad7147_captouch@2c { + sideinteraction: touch@2c { compatible = "ad,ad7147_captouch"; reg = <0x2c>; diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi index 9dbde79f26..0163d41f95 100644 --- a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -79,7 +79,7 @@ pmsg-size = <0x80000>; }; - fb_region: fb_region@40000000 { + fb_region: fb@40000000 { reg = <0 0x40000000 0 0x1000000>; no-map; }; diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi index 8295bf1b21..695e541832 100644 --- a/dts/src/arm64/qcom/msm8994.dtsi +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -233,7 +233,7 @@ #size-cells = <2>; ranges; - dfps_data_mem: dfps_data_mem@3400000 { + dfps_data_mem: dfps-data@3400000 { reg = <0 0x03400000 0 0x1000>; no-map; }; @@ -243,7 +243,7 @@ no-map; }; - smem_mem: smem_region@6a00000 { + smem_mem: smem@6a00000 { reg = <0 0x06a00000 0 0x200000>; no-map; }; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index ee6f87c828..1601e46549 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -756,12 +756,12 @@ #address-cells = <1>; #size-cells = <1>; - qusb2p_hstx_trim: hstx_trim@24e { + qusb2p_hstx_trim: hstx-trim@24e { reg = <0x24e 0x2>; bits = <5 4>; }; - qusb2s_hstx_trim: hstx_trim@24f { + qusb2s_hstx_trim: hstx-trim@24f { reg = <0x24f 0x1>; bits = <1 4>; }; @@ -2077,7 +2077,7 @@ <0 0>, <0 0>, <150000000 300000000>, - <0 0>, + <75000000 150000000>, <0 0>, <0 0>, <0 0>, @@ -2096,8 +2096,8 @@ compatible = "qcom,msm8996-qmp-ufs-phy"; reg = <0x00627000 0x1000>; - clocks = <&gcc GCC_UFS_CLKREF_CLK>; - clock-names = "ref"; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref", "qref"; resets = <&ufshc 0>; reset-names = "ufsphy"; @@ -3381,8 +3381,12 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq"; clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, <&gcc GCC_USB20_MASTER_CLK>, diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 2793cc22d3..4dfe2d09ac 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -1047,12 +1047,12 @@ compatible = "qcom,msm8998-qmp-ufs-phy"; reg = <0x01da7000 0x1000>; - clock-names = - "ref", - "ref_aux"; - clocks = - <&gcc GCC_UFS_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_AUX_CLK>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_PHY_AUX_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; reset-names = "ufsphy"; resets = <&ufshc 0>; @@ -1072,6 +1072,11 @@ reg = <0x01f60000 0x20000>; }; + tcsr_regs_2: syscon@1fc0000 { + compatible = "qcom,msm8998-tcsr", "syscon"; + reg = <0x01fc0000 0x26000>; + }; + tlmm: pinctrl@3400000 { compatible = "qcom,msm8998-pinctrl"; reg = <0x03400000 0xc00000>; @@ -2132,9 +2137,12 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; power-domains = <&gcc USB_30_GDSC>; @@ -2174,6 +2182,8 @@ reset-names = "phy", "phy_phy"; + qcom,tcsr-reg = <&tcsr_regs_2 0xb244>; + status = "disabled"; }; diff --git a/dts/src/arm64/qcom/pm2250.dtsi b/dts/src/arm64/qcom/pm4125.dtsi index 5f1d15db5c..cf8c822e80 100644 --- a/dts/src/arm64/qcom/pm2250.dtsi +++ b/dts/src/arm64/qcom/pm4125.dtsi @@ -19,7 +19,7 @@ compatible = "qcom,pm8916-pon"; reg = <0x800>; - pm2250_pwrkey: pwrkey { + pm4125_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_POWER>; @@ -27,7 +27,7 @@ bias-pull-up; }; - pm2250_resin: resin { + pm4125_resin: resin { compatible = "qcom,pm8941-resin"; interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; @@ -36,6 +36,36 @@ }; }; + pm4125_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm4125_typec: typec@1500 { + compatible = "qcom,pm4125-typec", "qcom,pmi632-typec"; + reg = <0x1500>; + interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect"; + vdd-vbus-supply = <&pm4125_vbus>; + + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; @@ -43,11 +73,11 @@ interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm2250_gpios: gpio@c000 { + pm4125_gpios: gpio@c000 { compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm2250_gpios 0 0 10>; + gpio-ranges = <&pm4125_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm64/qcom/pm6150.dtsi b/dts/src/arm64/qcom/pm6150.dtsi index ddbaf7280b..11158c2bd5 100644 --- a/dts/src/arm64/qcom/pm6150.dtsi +++ b/dts/src/arm64/qcom/pm6150.dtsi @@ -63,6 +63,52 @@ }; }; + pm6150_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm6150-vbus-reg, + qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm6150_typec: typec@1500 { + compatible = "qcom,pm6150-typec, + qcom,pm8150b-typec"; + reg = <0x1500>, <0x1700>; + interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + status = "disabled"; + }; + pm6150_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; diff --git a/dts/src/arm64/qcom/pmi632.dtsi b/dts/src/arm64/qcom/pmi632.dtsi index 4eb79e0ce4..94d53b1cf6 100644 --- a/dts/src/arm64/qcom/pmi632.dtsi +++ b/dts/src/arm64/qcom/pmi632.dtsi @@ -45,6 +45,36 @@ #address-cells = <1>; #size-cells = <0>; + pmi632_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pmi632_typec: typec@1500 { + compatible = "qcom,pmi632-typec"; + reg = <0x1500>; + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect"; + vdd-vbus-supply = <&pmi632_vbus>; + + status = "disabled"; + }; + pmi632_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -127,6 +157,11 @@ status = "disabled"; }; + pmi632_pbs_client3: pbs@7400 { + compatible = "qcom,pmi632-pbs", "qcom,pbs"; + reg = <0x7400>; + }; + pmi632_sdam_7: nvram@b600 { compatible = "qcom,spmi-sdam"; reg = <0xb600>; @@ -155,6 +190,10 @@ pmi632_lpg: pwm { compatible = "qcom,pmi632-lpg"; + nvmem = <&pmi632_sdam_7>; + nvmem-names = "lpg_chan_sdam"; + qcom,pbs = <&pmi632_pbs_client3>; + #address-cells = <1>; #size-cells = <0>; #pwm-cells = <2>; diff --git a/dts/src/arm64/qcom/qcm2290.dtsi b/dts/src/arm64/qcom/qcm2290.dtsi index 0911fb08ed..89beac833d 100644 --- a/dts/src/arm64/qcom/qcm2290.dtsi +++ b/dts/src/arm64/qcom/qcm2290.dtsi @@ -442,6 +442,11 @@ #hwlock-cells = <1>; }; + tcsr_regs: syscon@3c0000 { + compatible = "qcom,qcm2290-tcsr", "syscon"; + reg = <0x0 0x003c0000 0x0 0x40000>; + }; + tlmm: pinctrl@500000 { compatible = "qcom,qcm2290-tlmm"; reg = <0x0 0x00500000 0x0 0x300000>; @@ -690,6 +695,8 @@ #phy-cells = <0>; + qcom,tcsr-reg = <&tcsr_regs 0xb244>; + status = "disabled"; }; diff --git a/dts/src/arm64/qcom/qcm6490-fairphone-fp5.dts b/dts/src/arm64/qcom/qcm6490-fairphone-fp5.dts index 176898c9db..4ff9fc24e5 100644 --- a/dts/src/arm64/qcom/qcm6490-fairphone-fp5.dts +++ b/dts/src/arm64/qcom/qcm6490-fairphone-fp5.dts @@ -71,6 +71,41 @@ }; }; + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + reserved-memory { cont_splash_mem: cont-splash@e1000000 { reg = <0x0 0xe1000000 0x0 0x2300000>; @@ -82,6 +117,11 @@ no-map; }; + removed_mem: removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; + no-map; + }; + rmtfs_mem: memory@f8500000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf8500000 0x0 0x600000>; @@ -886,7 +926,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { @@ -915,6 +964,11 @@ status = "okay"; }; +&venus { + firmware-name = "qcom/qcm6490/fairphone5/venus.mbn"; + status = "okay"; +}; + &wifi { qcom,ath11k-calibration-variant = "Fairphone_5"; status = "okay"; diff --git a/dts/src/arm64/qcom/qcm6490-idp.dts b/dts/src/arm64/qcom/qcm6490-idp.dts index 03e97e27d1..e4bfad50a6 100644 --- a/dts/src/arm64/qcom/qcm6490-idp.dts +++ b/dts/src/arm64/qcom/qcm6490-idp.dts @@ -5,8 +5,14 @@ /dts-v1/; +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc7280.dtsi" +#include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" @@ -109,7 +115,7 @@ no-map; }; - trusted_apps_mem: trusted_apps@c1800000 { + trusted_apps_mem: trusted-apps@c1800000 { reg = <0x0 0xc1800000 0x0 0x1c00000>; no-map; }; @@ -123,8 +129,8 @@ vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <4350000>; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; }; }; @@ -415,6 +421,33 @@ }; }; +&pm8350c_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index 2f2eeaf2e9..a05d0234f7 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -675,6 +675,14 @@ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; + + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "qusb2_phy"; + status = "disabled"; usb3_dwc3: usb@7580000 { @@ -704,6 +712,14 @@ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>; assigned-clock-rates = <19200000>, <133333333>; + + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "qusb2_phy"; + status = "disabled"; usb@78c0000 { diff --git a/dts/src/arm64/qcom/qcs6490-rb3gen2.dts b/dts/src/arm64/qcom/qcs6490-rb3gen2.dts index 8bb7d13d85..97824c769b 100644 --- a/dts/src/arm64/qcom/qcs6490-rb3gen2.dts +++ b/dts/src/arm64/qcom/qcs6490-rb3gen2.dts @@ -110,7 +110,7 @@ no-map; }; - trusted_apps_mem: trusted_apps@c1800000 { + trusted_apps_mem: trusted-apps@c1800000 { reg = <0x0 0xc1800000 0x0 0x1c00000>; no-map; }; @@ -124,8 +124,8 @@ vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <4350000>; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; }; }; @@ -413,6 +413,23 @@ }; }; +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/dts/src/arm64/qcom/qrb2210-rb1.dts b/dts/src/arm64/qcom/qrb2210-rb1.dts index aa53b6af6d..6e9dd0312a 100644 --- a/dts/src/arm64/qcom/qrb2210-rb1.dts +++ b/dts/src/arm64/qcom/qrb2210-rb1.dts @@ -7,7 +7,7 @@ #include <dt-bindings/leds/common.h> #include "qcm2290.dtsi" -#include "pm2250.dtsi" +#include "pm4125.dtsi" / { model = "Qualcomm Technologies, Inc. Robotics RB1"; @@ -177,6 +177,24 @@ }; }; +&CPU_PD0 { + /delete-property/ power-domains; +}; + +&CPU_PD1 { + /delete-property/ power-domains; +}; + +&CPU_PD2 { + /delete-property/ power-domains; +}; + +&CPU_PD3 { + /delete-property/ power-domains; +}; + +/delete-node/ &CLUSTER_PD; + &gpi_dma0 { status = "okay"; }; @@ -226,7 +244,7 @@ }; &mdss_dsi0 { - vdda-supply = <&pm2250_l5>; + vdda-supply = <&pm4125_l5>; status = "okay"; }; @@ -239,7 +257,7 @@ status = "okay"; }; -&pm2250_resin { +&pm4125_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; }; @@ -263,23 +281,23 @@ compatible = "qcom,rpm-pm2250-regulators"; vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; - vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>; + vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>; vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>; - vdd_l13_l14_l15_l16-supply = <&pm2250_s4>; + vdd_l13_l14_l15_l16-supply = <&pm4125_s4>; /* * S1 - VDD_APC * S2 - VDD_CX */ - pm2250_s3: s3 { + pm4125_s3: s3 { /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; regulator-boot-on; }; - pm2250_s4: s4 { + pm4125_s4: s4 { /* 1.2V-2.35V -> 2.05V (Power tree requirements) */ regulator-min-microvolt = <2072000>; regulator-max-microvolt = <2072000>; @@ -288,7 +306,7 @@ /* L1 - VDD_MX */ - pm2250_l2: l2 { + pm4125_l2: l2 { /* LPDDR4X VDD2 */ regulator-min-microvolt = <1136000>; regulator-max-microvolt = <1136000>; @@ -296,7 +314,7 @@ regulator-boot-on; }; - pm2250_l3: l3 { + pm4125_l3: l3 { /* LPDDR4X VDDQ */ regulator-min-microvolt = <616000>; regulator-max-microvolt = <616000>; @@ -304,14 +322,14 @@ regulator-boot-on; }; - pm2250_l4: l4 { + pm4125_l4: l4 { /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2700000>; regulator-allow-set-load; }; - pm2250_l5: l5 { + pm4125_l5: l5 { /* CSI/DSI */ regulator-min-microvolt = <1232000>; regulator-max-microvolt = <1232000>; @@ -319,7 +337,7 @@ regulator-boot-on; }; - pm2250_l6: l6 { + pm4125_l6: l6 { /* DRAM PLL */ regulator-min-microvolt = <928000>; regulator-max-microvolt = <928000>; @@ -327,7 +345,7 @@ regulator-boot-on; }; - pm2250_l7: l7 { + pm4125_l7: l7 { /* Wi-Fi CX/MX */ regulator-min-microvolt = <664000>; regulator-max-microvolt = <664000>; @@ -338,20 +356,20 @@ * L9 - VDD_LPI_MX */ - pm2250_l10: l10 { + pm4125_l10: l10 { /* Wi-Fi RFA */ regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; - pm2250_l11: l11 { + pm4125_l11: l11 { /* GPS RF1 */ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-boot-on; }; - pm2250_l12: l12 { + pm4125_l12: l12 { /* USB PHYs */ regulator-min-microvolt = <928000>; regulator-max-microvolt = <928000>; @@ -359,7 +377,7 @@ regulator-boot-on; }; - pm2250_l13: l13 { + pm4125_l13: l13 { /* USB/QFPROM/PLLs */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -367,7 +385,7 @@ regulator-boot-on; }; - pm2250_l14: l14 { + pm4125_l14: l14 { /* SDHCI1 VQMMC */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -376,7 +394,7 @@ regulator-always-on; }; - pm2250_l15: l15 { + pm4125_l15: l15 { /* WCD/DSI/BT VDDIO */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -385,38 +403,38 @@ regulator-boot-on; }; - pm2250_l16: l16 { + pm4125_l16: l16 { /* GPS RF2 */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; }; - pm2250_l17: l17 { + pm4125_l17: l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - pm2250_l18: l18 { + pm4125_l18: l18 { /* VDD_PXn */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm2250_l19: l19 { + pm4125_l19: l19 { /* VDD_PXn */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm2250_l20: l20 { + pm4125_l20: l20 { /* SDHCI1 VMMC */ regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3600000>; regulator-allow-set-load; }; - pm2250_l21: l21 { + pm4125_l21: l21 { /* SDHCI2 VMMC */ regulator-min-microvolt = <2960000>; regulator-max-microvolt = <3300000>; @@ -424,7 +442,7 @@ regulator-boot-on; }; - pm2250_l22: l22 { + pm4125_l22: l22 { /* Wi-Fi */ regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; @@ -433,8 +451,8 @@ }; &sdhc_1 { - vmmc-supply = <&pm2250_l20>; - vqmmc-supply = <&pm2250_l14>; + vmmc-supply = <&pm4125_l20>; + vqmmc-supply = <&pm4125_l14>; pinctrl-0 = <&sdc1_state_on>; pinctrl-1 = <&sdc1_state_off>; pinctrl-names = "default", "sleep"; @@ -446,8 +464,8 @@ }; &sdhc_2 { - vmmc-supply = <&pm2250_l21>; - vqmmc-supply = <&pm2250_l4>; + vmmc-supply = <&pm4125_l21>; + vqmmc-supply = <&pm4125_l4>; cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; @@ -518,8 +536,8 @@ }; &usb_qmpphy { - vdda-phy-supply = <&pm2250_l12>; - vdda-pll-supply = <&pm2250_l13>; + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; status = "okay"; }; @@ -528,17 +546,17 @@ }; &usb_hsphy { - vdd-supply = <&pm2250_l12>; - vdda-pll-supply = <&pm2250_l13>; - vdda-phy-dpdm-supply = <&pm2250_l21>; + vdd-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + vdda-phy-dpdm-supply = <&pm4125_l21>; status = "okay"; }; &wifi { - vdd-0.8-cx-mx-supply = <&pm2250_l7>; - vdd-1.8-xo-supply = <&pm2250_l13>; - vdd-1.3-rfa-supply = <&pm2250_l10>; - vdd-3.3-ch0-supply = <&pm2250_l22>; + vdd-0.8-cx-mx-supply = <&pm4125_l7>; + vdd-1.8-xo-supply = <&pm4125_l13>; + vdd-1.3-rfa-supply = <&pm4125_l10>; + vdd-3.3-ch0-supply = <&pm4125_l22>; qcom,ath10k-calibration-variant = "Thundercomm_RB1"; status = "okay"; }; diff --git a/dts/src/arm64/qcom/qrb4210-rb2.dts b/dts/src/arm64/qcom/qrb4210-rb2.dts index 7c19f874fa..696d6d43c5 100644 --- a/dts/src/arm64/qcom/qrb4210-rb2.dts +++ b/dts/src/arm64/qcom/qrb4210-rb2.dts @@ -6,8 +6,10 @@ /dts-v1/; #include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> #include "sm4250.dtsi" #include "pm6125.dtsi" +#include "pmi632.dtsi" / { model = "Qualcomm Technologies, Inc. QRB4210 RB2"; @@ -256,6 +258,46 @@ }; }; +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pmi632_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -607,8 +649,8 @@ status = "okay"; }; -&usb_dwc3 { - maximum-speed = "super-speed"; +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; }; &usb_hsphy { @@ -626,6 +668,10 @@ status = "okay"; }; +&usb_qmpphy_out { + remote-endpoint = <&pmi632_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>; vdd-1.8-xo-supply = <&vreg_l16a_1p3>; diff --git a/dts/src/arm64/qcom/sa8295p-adp.dts b/dts/src/arm64/qcom/sa8295p-adp.dts index fd253942e5..78e933c42c 100644 --- a/dts/src/arm64/qcom/sa8295p-adp.dts +++ b/dts/src/arm64/qcom/sa8295p-adp.dts @@ -108,6 +108,13 @@ }; }; }; + + reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + }; }; &apps_rsc { @@ -266,6 +273,48 @@ status = "okay"; }; +&i2c12 { + pinctrl-0 = <&qup1_i2c4_state>; + pinctrl-names = "default"; + + status = "okay"; + + vdd_gfx: regulator@39 { + compatible = "maxim,max20411"; + reg = <0x39>; + + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + + enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&max20411_en>; + pinctrl-names = "default"; + }; +}; + +&gpucc { + vdd-gfx-supply = <&vdd_gfx>; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sa8295p/a690_zap.mbn"; + }; +}; + +&gpu_smmu { + status = "okay"; +}; + &mdss0 { status = "okay"; }; @@ -476,6 +525,10 @@ status = "okay"; }; +&qup1 { + status = "okay"; +}; + &qup2 { status = "okay"; }; @@ -636,6 +689,14 @@ /* PINCTRL */ +&pmm8540a_gpios { + max20411_en: max20411-en-state { + pins = "gpio2"; + function = "normal"; + output-enable; + }; +}; + &tlmm { pcie2a_default: pcie2a-default-state { clkreq-n-pins { @@ -728,4 +789,11 @@ bias-pull-up; }; }; + + qup1_i2c4_state: qup1-i2c4-state { + pins = "gpio0", "gpio1"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; }; diff --git a/dts/src/arm64/qcom/sa8540p-ride.dts b/dts/src/arm64/qcom/sa8540p-ride.dts index b04f72ec09..177b9dad6f 100644 --- a/dts/src/arm64/qcom/sa8540p-ride.dts +++ b/dts/src/arm64/qcom/sa8540p-ride.dts @@ -376,14 +376,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie2a_default>; - status = "okay"; + status = "disabled"; }; &pcie2a_phy { vdda-phy-supply = <&vreg_l11a>; vdda-pll-supply = <&vreg_l3a>; - status = "okay"; + status = "disabled"; }; &pcie3a { diff --git a/dts/src/arm64/qcom/sa8540p.dtsi b/dts/src/arm64/qcom/sa8540p.dtsi index 96b2c59ad0..23888029cc 100644 --- a/dts/src/arm64/qcom/sa8540p.dtsi +++ b/dts/src/arm64/qcom/sa8540p.dtsi @@ -168,6 +168,9 @@ }; &gpucc { + /* SA8295P and SA8540P doesn't provide gfx.lvl */ + /delete-property/ power-domains; + status = "disabled"; }; diff --git a/dts/src/arm64/qcom/sa8775p.dtsi b/dts/src/arm64/qcom/sa8775p.dtsi index a7eaca33d3..231cea1f0f 100644 --- a/dts/src/arm64/qcom/sa8775p.dtsi +++ b/dts/src/arm64/qcom/sa8775p.dtsi @@ -356,13 +356,18 @@ no-map; }; + ddr_training_checksum: ddr-training-checksum@908c0000 { + reg = <0x0 0x908c0000 0x0 0x1000>; + no-map; + }; + reserved_mem: reserved@908f0000 { - reg = <0x0 0x908f0000 0x0 0xf000>; + reg = <0x0 0x908f0000 0x0 0xe000>; no-map; }; - secdata_apss_mem: secdata-apss@908ff000 { - reg = <0x0 0x908ff000 0x0 0x1000>; + secdata_apss_mem: secdata-apss@908fe000 { + reg = <0x0 0x908fe000 0x0 0x2000>; no-map; }; @@ -373,8 +378,43 @@ hwlocks = <&tcsr_mutex 3>; }; - cpucp_fw_mem: cpucp-fw@90b00000 { - reg = <0x0 0x90b00000 0x0 0x100000>; + tz_sail_mailbox_mem: tz-sail-mailbox@90c00000 { + reg = <0x0 0x90c00000 0x0 0x100000>; + no-map; + }; + + sail_mailbox_mem: sail-ss@90d00000 { + reg = <0x0 0x90d00000 0x0 0x100000>; + no-map; + }; + + sail_ota_mem: sail-ss@90e00000 { + reg = <0x0 0x90e00000 0x0 0x300000>; + no-map; + }; + + aoss_backup_mem: aoss-backup@91b00000 { + reg = <0x0 0x91b00000 0x0 0x40000>; + no-map; + }; + + cpucp_backup_mem: cpucp-backup@91b40000 { + reg = <0x0 0x91b40000 0x0 0x40000>; + no-map; + }; + + tz_config_backup_mem: tz-config-backup@91b80000 { + reg = <0x0 0x91b80000 0x0 0x10000>; + no-map; + }; + + ddr_training_data_mem: ddr-training-data@91b90000 { + reg = <0x0 0x91b90000 0x0 0x10000>; + no-map; + }; + + cdt_data_backup_mem: cdt-data-backup@91ba0000 { + reg = <0x0 0x91ba0000 0x0 0x1000>; no-map; }; @@ -433,13 +473,43 @@ no-map; }; + audio_mdf_mem: audio-mdf-region@ae000000 { + reg = <0x0 0xae000000 0x0 0x1000000>; + no-map; + }; + + firmware_mem: firmware-region@b0000000 { + reg = <0x0 0xb0000000 0x0 0x800000>; + no-map; + }; + hyptz_reserved_mem: hyptz-reserved@beb00000 { reg = <0x0 0xbeb00000 0x0 0x11500000>; no-map; }; - tz_stat_mem: tz-stat@d0000000 { - reg = <0x0 0xd0000000 0x0 0x100000>; + scmi_mem: scmi-region@d0000000 { + reg = <0x0 0xd0000000 0x0 0x40000>; + no-map; + }; + + firmware_logs_mem: firmware-logs@d0040000 { + reg = <0x0 0xd0040000 0x0 0x10000>; + no-map; + }; + + firmware_audio_mem: firmware-audio@d0050000 { + reg = <0x0 0xd0050000 0x0 0x4000>; + no-map; + }; + + firmware_reserved_mem: firmware-reserved@d0054000 { + reg = <0x0 0xd0054000 0x0 0x9c000>; + no-map; + }; + + firmware_quantum_test_mem: firmware-quantum-test@d00f0000 { + reg = <0x0 0xd00f0000 0x0 0x10000>; no-map; }; @@ -453,8 +523,23 @@ no-map; }; - trusted_apps_mem: trusted-apps@d1800000 { - reg = <0x0 0xd1800000 0x0 0x3900000>; + deepsleep_backup_mem: deepsleep-backup@d1800000 { + reg = <0x0 0xd1800000 0x0 0x100000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1900000 { + reg = <0x0 0xd1900000 0x0 0x3800000>; + no-map; + }; + + tz_stat_mem: tz-stat@db100000 { + reg = <0x0 0xdb100000 0x0 0x100000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw@db200000 { + reg = <0x0 0xdb200000 0x0 0x100000>; no-map; }; }; @@ -1615,10 +1700,12 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -1702,10 +1789,12 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, <&pdc 7 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -1765,9 +1854,11 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>, <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq"; @@ -2394,8 +2485,9 @@ <0x0 0x23016000 0x0 0x100>; reg-names = "stmmaceth", "rgmii"; - interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; + interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "sfty"; clocks = <&gcc GCC_EMAC1_AXI_CLK>, <&gcc GCC_EMAC1_SLV_AHB_CLK>, @@ -2427,8 +2519,9 @@ <0x0 0x23056000 0x0 0x100>; reg-names = "stmmaceth", "rgmii"; - interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; + interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "sfty"; clocks = <&gcc GCC_EMAC0_AXI_CLK>, <&gcc GCC_EMAC0_SLV_AHB_CLK>, diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi index 46aaeba286..5260c63db0 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi @@ -649,6 +649,7 @@ ap_ec_spi: &spi6 { pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; @@ -943,6 +944,8 @@ ap_spi_fp: &spi10 { vddrf-supply = <&pp1300_l2c>; vddch0-supply = <&pp3300_l10c>; max-speed = <3200000>; + + qcom,local-bd-address-broken; }; }; diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi index 4dcaa15cae..2b481e20ae 100644 --- a/dts/src/arm64/qcom/sc7180.dtsi +++ b/dts/src/arm64/qcom/sc7180.dtsi @@ -817,7 +817,7 @@ bits = <1 3>; }; - gpu_speed_bin: gpu_speed_bin@1d2 { + gpu_speed_bin: gpu-speed-bin@1d2 { reg = <0x1d2 0x2>; bits = <5 8>; }; @@ -1532,6 +1532,76 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sc7180-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xa0 0x0>; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + qcom,ice = <&ice>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7180-qmp-ufs-phy", + "qcom,sm7150-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1000>; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + #phy-cells = <0>; + status = "disabled"; + }; + + ice: crypto@1d90000 { + compatible = "qcom,sc7180-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d90000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + ipa: ipa@1e40000 { compatible = "qcom,sc7180-ipa"; @@ -2964,12 +3034,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; required-opps = <&rpmhpd_opp_nom>; diff --git a/dts/src/arm64/qcom/sc7280-chrome-common.dtsi b/dts/src/arm64/qcom/sc7280-chrome-common.dtsi index c4d00a81da..cecb3e89f7 100644 --- a/dts/src/arm64/qcom/sc7280-chrome-common.dtsi +++ b/dts/src/arm64/qcom/sc7280-chrome-common.dtsi @@ -18,6 +18,7 @@ */ /delete-node/ &cdsp_mem; +/delete-node/ &domain_idle_states; /delete-node/ &gpu_zap_mem; /delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; @@ -26,6 +27,18 @@ /delete-node/ &sec_apps_mem; / { + cpus { + domain_idle_states: domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40003444>; + entry-latency-us = <2752>; + exit-latency-us = <6562>; + min-residency-us = <9926>; + }; + }; + }; + reserved-memory { camera_mem: memory@8ad00000 { reg = <0x0 0x8ad00000 0x0 0x500000>; @@ -39,6 +52,10 @@ }; }; +&CLUSTER_PD { + domain-idle-states = <&CLUSTER_SLEEP_0>; +}; + &lpass_aon { status = "okay"; }; @@ -119,6 +136,17 @@ dma-coherent; }; +&venus { + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + + status = "okay"; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; +}; + &watchdog { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sc7280-herobrine.dtsi b/dts/src/arm64/qcom/sc7280-herobrine.dtsi index 9ea6636125..2ba4ea60cb 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine.dtsi +++ b/dts/src/arm64/qcom/sc7280-herobrine.dtsi @@ -548,6 +548,7 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi b/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi index ebae545c58..fbfac7534d 100644 --- a/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi +++ b/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi @@ -19,6 +19,7 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/dts/src/arm64/qcom/sc7280.dtsi b/dts/src/arm64/qcom/sc7280.dtsi index 83b5b76ba1..7e7f0f0fb4 100644 --- a/dts/src/arm64/qcom/sc7280.dtsi +++ b/dts/src/arm64/qcom/sc7280.dtsi @@ -202,6 +202,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_0>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -229,6 +231,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -251,6 +255,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -273,6 +279,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -295,6 +303,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -317,6 +327,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -339,6 +351,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -361,6 +375,8 @@ power-domain-names = "psci"; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu7_opp_table>; + capacity-dmips-mhz = <1985>; + dynamic-power-coefficient = <552>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 2>; @@ -453,15 +469,29 @@ }; }; - domain-idle-states { - CLUSTER_SLEEP_0: cluster-sleep-0 { + domain_idle_states: domain-idle-states { + CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-down"; - arm,psci-suspend-param = <0x40003444>; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + CLUSTER_SLEEP_CX_RET: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001344>; entry-latency-us = <3263>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + CLUSTER_SLEEP_LLCC_OFF: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <3638>; exit-latency-us = <6562>; - min-residency-us = <9926>; - local-timer-stop; + min-residency-us = <9826>; }; }; }; @@ -872,7 +902,7 @@ CLUSTER_PD: power-domain-cluster { #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; + domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_CX_RET &CLUSTER_SLEEP_LLCC_OFF>; }; }; @@ -966,7 +996,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@1e9 { + gpu_speed_bin: gpu-speed-bin@1e9 { reg = <0x1e9 0x2>; bits = <5 8>; }; @@ -2178,8 +2208,16 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, @@ -2345,6 +2383,8 @@ <&apps_smmu 0x4e6 0x0011>; qcom,ee = <0>; qcom,controlled-remotely; + num-channels = <16>; + qcom,num-ees = <4>; }; crypto: crypto@1dfa000 { @@ -2648,6 +2688,31 @@ status = "disabled"; }; + slimbam: dma-controller@3a84000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x03a84000 0 0x20000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,controlled-remotely; + num-channels = <31>; + qcom,ee = <1>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x1826 0x0>; + status = "disabled"; + }; + + slim: slim-ngd@3ac0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0 0x03ac0000 0 0x2c000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x1826 0x0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + lpass_hm: clock-controller@3c00000 { compatible = "qcom,sc7280-lpasshm"; reg = <0 0x03c00000 0 0x28>; @@ -3582,10 +3647,12 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", + interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq"; @@ -4035,11 +4102,13 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", + interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -4065,6 +4134,25 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -4091,10 +4179,11 @@ <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "cpu-cfg", "video-mem"; - iommus = <&apps_smmu 0x2180 0x20>, - <&apps_smmu 0x2184 0x20>; + iommus = <&apps_smmu 0x2180 0x20>; memory-region = <&video_mem>; + status = "disabled"; + video-decoder { compatible = "venus-decoder"; }; @@ -4103,10 +4192,6 @@ compatible = "venus-encoder"; }; - video-firmware { - iommus = <&apps_smmu 0x21a2 0x0>; - }; - venus_opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/dts/src/arm64/qcom/sc8180x.dtsi b/dts/src/arm64/qcom/sc8180x.dtsi index 0430d99091..32afc78d5b 100644 --- a/dts/src/arm64/qcom/sc8180x.dtsi +++ b/dts/src/arm64/qcom/sc8180x.dtsi @@ -290,7 +290,7 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <241>; + entry-latency-us = <2411>; exit-latency-us = <1461>; min-residency-us = <4488>; local-timer-stop; @@ -298,7 +298,15 @@ }; domain-idle-states { - CLUSTER_SLEEP_0: cluster-sleep-0 { + CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <3300>; + exit-latency-us = <3300>; + min-residency-us = <6000>; + }; + + CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x4100a344>; entry-latency-us = <3263>; @@ -582,7 +590,7 @@ CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; + domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>; }; }; @@ -782,6 +790,7 @@ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC8180X_CX>; }; qupv3_id_0: geniqup@8c0000 { @@ -1708,8 +1717,22 @@ ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1805,8 +1828,22 @@ ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1903,8 +1940,22 @@ ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>, <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2001,8 +2052,22 @@ ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>, <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2131,9 +2196,11 @@ reg = <0 0x01d87000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_EN>; clock-names = "ref", - "ref_aux"; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2173,6 +2240,8 @@ interconnect-names = "gfx-mem"; qcom,gmu = <&gmu>; + #cooling-cells = <2>; + status = "disabled"; gpu_opp_table: opp-table { @@ -2692,9 +2761,15 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, - <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; + interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x800 0x420>; @@ -2723,10 +2798,8 @@ "rot", "lut"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <460000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SC8180X_MMCX>; @@ -3184,7 +3257,7 @@ <&dispcc DISP_CC_MDSS_AHB_CLK>; clock-names = "aux", "cfg_ahb"; - power-domains = <&dispcc MDSS_GDSC>; + power-domains = <&rpmhpd SC8180X_MX>; #clock-cells = <1>; #phy-cells = <0>; @@ -3210,6 +3283,7 @@ "edp_phy_pll_link_clk", "edp_phy_pll_vco_div_clk"; power-domains = <&rpmhpd SC8180X_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -3248,7 +3322,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x100000>; + reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -3256,6 +3330,11 @@ #power-domain-cells = <1>; }; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c3f0000 0x0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, @@ -3880,8 +3959,15 @@ thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -4030,8 +4116,15 @@ thermal-sensors = <&tsens1 11>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index eb657e5449..15ae94c160 100644 --- a/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -6,10 +6,8 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> @@ -855,27 +853,6 @@ }; &pmk8280_vadc { - status = "okay"; - - channel@3 { - reg = <PMK8350_ADC7_DIE_TEMP>; - qcom,pre-scaling = <1 1>; - label = "pmk8350_die_temp"; - }; - - channel@44 { - reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; - qcom,hw-settle-time = <200>; - qcom,ratiometric; - label = "pmk8350_xo_therm"; - }; - - channel@103 { - reg = <PM8350_ADC7_DIE_TEMP(1)>; - qcom,pre-scaling = <1 1>; - label = "pmc8280_1_die_temp"; - }; - channel@144 { reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; qcom,hw-settle-time = <200>; @@ -904,12 +881,6 @@ label = "sys_therm4"; }; - channel@303 { - reg = <PM8350_ADC7_DIE_TEMP(3)>; - qcom,pre-scaling = <1 1>; - label = "pmc8280_2_die_temp"; - }; - channel@344 { reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; qcom,hw-settle-time = <200>; @@ -937,12 +908,6 @@ qcom,ratiometric; label = "sys_therm8"; }; - - channel@403 { - reg = <PMR735A_ADC7_DIE_TEMP>; - qcom,pre-scaling = <1 1>; - label = "pmr735a_die_temp"; - }; }; &qup0 { @@ -1204,7 +1169,7 @@ }; &vamacro { - pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; vdd-micb-supply = <&vreg_s10b>; diff --git a/dts/src/arm64/qcom/sc8280xp-pmics.dtsi b/dts/src/arm64/qcom/sc8280xp-pmics.dtsi index 80ee12ded4..945de77911 100644 --- a/dts/src/arm64/qcom/sc8280xp-pmics.dtsi +++ b/dts/src/arm64/qcom/sc8280xp-pmics.dtsi @@ -3,6 +3,9 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -84,7 +87,37 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - status = "disabled"; + + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_die_temp"; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "pmk8350_xo_therm"; + }; + + channel@103 { + reg = <PM8350_ADC7_DIE_TEMP(1)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_1_die_temp"; + }; + + channel@303 { + reg = <PM8350_ADC7_DIE_TEMP(3)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_2_die_temp"; + }; + + channel@403 { + reg = <PMR735A_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_die_temp"; + }; }; pmk8280_adc_tm: adc-tm@3400 { @@ -126,6 +159,8 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; @@ -178,6 +213,8 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; diff --git a/dts/src/arm64/qcom/sc8280xp.dtsi b/dts/src/arm64/qcom/sc8280xp.dtsi index febf28356f..a5b1948130 100644 --- a/dts/src/arm64/qcom/sc8280xp.dtsi +++ b/dts/src/arm64/qcom/sc8280xp.dtsi @@ -2257,9 +2257,12 @@ compatible = "qcom,sc8280xp-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; - clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_CARD_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; power-domains = <&gcc UFS_PHY_GDSC>; @@ -2319,9 +2322,12 @@ compatible = "qcom,sc8280xp-qmp-ufs-phy"; reg = <0 0x01da7000 0 0x1000>; - clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, - <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CARD_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; power-domains = <&gcc UFS_CARD_GDSC>; @@ -2978,7 +2984,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -2994,7 +3000,7 @@ }; }; - dmic02_sleep: dmic02-sleep-state { + dmic23_sleep: dmic23-sleep-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -3451,6 +3457,404 @@ }; }; + cci0: cci@ac4a000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_0_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci0_default>; + pinctrl-1 = <&cci0_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_1_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci1_default>; + pinctrl-1 = <&cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci2: cci@ac4c000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4c000 0 0x1000>; + + interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_2_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci2_default>; + pinctrl-1 = <&cci2_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci2_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci2_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci3: cci@ac4d000 { + compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4d000 0 0x1000>; + + interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_3_CLK>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci"; + + power-domains = <&camcc TITAN_TOP_GDSC>; + + pinctrl-0 = <&cci3_default>; + pinctrl-1 = <&cci3_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci3_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci3_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@ac5a000 { + compatible = "qcom,sc8280xp-camss"; + + reg = <0 0x0ac5a000 0 0x2000>, + <0 0x0ac5c000 0 0x2000>, + <0 0x0ac65000 0 0x2000>, + <0 0x0ac67000 0 0x2000>, + <0 0x0acaf000 0 0x4000>, + <0 0x0acb3000 0 0x1000>, + <0 0x0acb6000 0 0x4000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acbd000 0 0x4000>, + <0 0x0acc1000 0 0x1000>, + <0 0x0acc4000 0 0x4000>, + <0 0x0acc8000 0 0x1000>, + <0 0x0accb000 0 0x4000>, + <0 0x0accf000 0 0x1000>, + <0 0x0acd2000 0 0x4000>, + <0 0x0acd6000 0 0x1000>, + <0 0x0acd9000 0 0x4000>, + <0 0x0acdd000 0 0x1000>, + <0 0x0ace0000 0 0x4000>, + <0 0x0ace4000 0 0x1000>; + reg-names = "csiphy2", + "csiphy3", + "csiphy0", + "csiphy1", + "vfe0", + "csid0", + "vfe1", + "csid1", + "vfe2", + "csid2", + "vfe_lite0", + "csid0_lite", + "vfe_lite1", + "csid1_lite", + "vfe_lite2", + "csid2_lite", + "vfe_lite3", + "csid3_lite", + "vfe3", + "csid3"; + + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csid1_lite", + "vfe_lite1", + "csiphy3", + "csid0", + "vfe0", + "csid1", + "vfe1", + "csid0_lite", + "vfe_lite0", + "csiphy0", + "csiphy1", + "csiphy2", + "csid2", + "vfe2", + "csid3_lite", + "csid2_lite", + "vfe_lite3", + "vfe_lite2", + "csid3", + "vfe3"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc IFE_2_GDSC>, + <&camcc IFE_3_GDSC>, + <&camcc TITAN_TOP_GDSC>; + power-domain-names = "ife0", + "ife1", + "ife2", + "ife3", + "top"; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CSIPHY0_CLK>, + <&camcc CAMCC_CSI0PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY1_CLK>, + <&camcc CAMCC_CSI1PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY2_CLK>, + <&camcc CAMCC_CSI2PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY3_CLK>, + <&camcc CAMCC_CSI3PHYTIMER_CLK>, + <&camcc CAMCC_IFE_0_AXI_CLK>, + <&camcc CAMCC_IFE_0_CLK>, + <&camcc CAMCC_IFE_0_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_0_CSID_CLK>, + <&camcc CAMCC_IFE_1_AXI_CLK>, + <&camcc CAMCC_IFE_1_CLK>, + <&camcc CAMCC_IFE_1_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_1_CSID_CLK>, + <&camcc CAMCC_IFE_2_AXI_CLK>, + <&camcc CAMCC_IFE_2_CLK>, + <&camcc CAMCC_IFE_2_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_2_CSID_CLK>, + <&camcc CAMCC_IFE_3_AXI_CLK>, + <&camcc CAMCC_IFE_3_CLK>, + <&camcc CAMCC_IFE_3_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_3_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_0_CLK>, + <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_0_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_1_CLK>, + <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_1_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_2_CLK>, + <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_2_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_3_CLK>, + <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_3_CSID_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe2_axi", + "vfe2", + "vfe2_cphy_rx", + "vfe2_csid", + "vfe3_axi", + "vfe3", + "vfe3_cphy_rx", + "vfe3_csid", + "vfe_lite0", + "vfe_lite0_cphy_rx", + "vfe_lite0_csid", + "vfe_lite1", + "vfe_lite1_cphy_rx", + "vfe_lite1_csid", + "vfe_lite2", + "vfe_lite2_cphy_rx", + "vfe_lite2_csid", + "vfe_lite3", + "vfe_lite3_cphy_rx", + "vfe_lite3_csid", + "gcc_axi_hf", + "gcc_axi_sf"; + + iommus = <&apps_smmu 0x2000 0x4e0>, + <&apps_smmu 0x2020 0x4e0>, + <&apps_smmu 0x2040 0x4e0>, + <&apps_smmu 0x2060 0x4e0>, + <&apps_smmu 0x2080 0x4e0>, + <&apps_smmu 0x20e0 0x4e0>, + <&apps_smmu 0x20c0 0x4e0>, + <&apps_smmu 0x20a0 0x4e0>, + <&apps_smmu 0x2400 0x4e0>, + <&apps_smmu 0x2420 0x4e0>, + <&apps_smmu 0x2440 0x4e0>, + <&apps_smmu 0x2460 0x4e0>, + <&apps_smmu 0x2480 0x4e0>, + <&apps_smmu 0x24e0 0x4e0>, + <&apps_smmu 0x24c0 0x4e0>, + <&apps_smmu 0x24a0 0x4e0>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cam_ahb", + "cam_hf_mnoc", + "cam_sf_mnoc", + "cam_sf_icp_mnoc"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + port@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + camcc: clock-controller@ad00000 { compatible = "qcom,sc8280xp-camcc"; reg = <0 0x0ad00000 0 0x20000>; @@ -4011,6 +4415,28 @@ interrupt-controller; }; + tsens2: thermal-sensor@c251000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c251000 0 0x1ff>, + <0 0x0c224000 0 0x8>; + #qcom,sensors = <11>; + interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c252000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c252000 0 0x1ff>, + <0 0x0c225000 0 0x8>; + #qcom,sensors = <5>; + interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + tsens0: thermal-sensor@c263000 { compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; reg = <0 0x0c263000 0 0x1ff>, /* TM */ @@ -4076,6 +4502,150 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 230>; wakeup-parent = <&pdc>; + + cci0_default: cci0-default-state { + cci0_i2c0_default: cci0-i2c0-default-pins { + /* cci_i2c_sda0, cci_i2c_scl0 */ + pins = "gpio113", "gpio114"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_i2c1_default: cci0-i2c1-default-pins { + /* cci_i2c_sda1, cci_i2c_scl1 */ + pins = "gpio115", "gpio116"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci0_sleep: cci0-sleep-state { + cci0_i2c0_sleep: cci0-i2c0-sleep-pins { + /* cci_i2c_sda0, cci_i2c_scl0 */ + pins = "gpio113", "gpio114"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci0_i2c1_sleep: cci0-i2c1-sleep-pins { + /* cci_i2c_sda1, cci_i2c_scl1 */ + pins = "gpio115", "gpio116"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_default: cci1-default-state { + cci1_i2c0_default: cci1-i2c0-default-pins { + /* cci_i2c_sda2, cci_i2c_scl2 */ + pins = "gpio10","gpio11"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_i2c1_default: cci1-i2c1-default-pins { + /* cci_i2c_sda3, cci_i2c_scl3 */ + pins = "gpio123","gpio124"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci1_sleep: cci1-sleep-state { + cci1_i2c0_sleep: cci1-i2c0-sleep-pins { + /* cci_i2c_sda2, cci_i2c_scl2 */ + pins = "gpio10","gpio11"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_i2c1_sleep: cci1-i2c1-sleep-pins { + /* cci_i2c_sda3, cci_i2c_scl3 */ + pins = "gpio123","gpio124"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_default: cci2-default-state { + cci2_i2c0_default: cci2-i2c0-default-pins { + /* cci_i2c_sda4, cci_i2c_scl4 */ + pins = "gpio117","gpio118"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_i2c1_default: cci2-i2c1-default-pins { + /* cci_i2c_sda5, cci_i2c_scl5 */ + pins = "gpio12","gpio13"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci2_sleep: cci2-sleep-state { + cci2_i2c0_sleep: cci2-i2c0-sleep-pins { + /* cci_i2c_sda4, cci_i2c_scl4 */ + pins = "gpio117","gpio118"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_i2c1_sleep: cci2-i2c1-sleep-pins { + /* cci_i2c_sda5, cci_i2c_scl5 */ + pins = "gpio12","gpio13"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci3_default: cci3-default-state { + cci3_i2c0_default: cci3-i2c0-default-pins { + /* cci_i2c_sda6, cci_i2c_scl6 */ + pins = "gpio145","gpio146"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_i2c1_default: cci3-i2c1-default-pins { + /* cci_i2c_sda7, cci_i2c_scl7 */ + pins = "gpio164","gpio165"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cci3_sleep: cci3-sleep-state { + cci3_i2c0_sleep: cci3-i2c0-sleep-pins { + /* cci_i2c_sda6, cci_i2c_scl6 */ + pins = "gpio145","gpio146"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_i2c1_sleep: cci3-i2c1-sleep-pins { + /* cci_i2c_sda7, cci_i2c_scl7 */ + pins = "gpio164","gpio165"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; apps_smmu: iommu@15000000 { @@ -5212,6 +5782,21 @@ }; }; + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 2>; + + trips { + gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + mem-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts b/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts index 2ed39d402d..702ab49bbc 100644 --- a/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts +++ b/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts @@ -461,3 +461,8 @@ dr_mode = "peripheral"; extcon = <&extcon_usb>; }; + +&usb3_qmpphy { + vdda-phy-supply = <&vreg_l1b_0p925>; + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sdm450-motorola-ali.dts b/dts/src/arm64/qcom/sdm450-motorola-ali.dts index 362be5719d..e27f3c5d5b 100644 --- a/dts/src/arm64/qcom/sdm450-motorola-ali.dts +++ b/dts/src/arm64/qcom/sdm450-motorola-ali.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "msm8953.dtsi" +#include "sdm450.dtsi" #include "pm8953.dtsi" #include "pmi8950.dtsi" diff --git a/dts/src/arm64/qcom/sdm450.dtsi b/dts/src/arm64/qcom/sdm450.dtsi new file mode 100644 index 0000000000..b222aeb459 --- /dev/null +++ b/dts/src/arm64/qcom/sdm450.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> */ + +#include "msm8953.dtsi" + +&gpu_opp_table { + /delete-node/ opp-650000000; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; +}; diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi index 87d0293c72..819a5f8825 100644 --- a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi @@ -241,6 +241,16 @@ }; }; +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <17500>; + qcom,num-strings = <2>; +}; + &pon_pwrkey { status = "okay"; }; @@ -658,10 +668,16 @@ }; &usb3 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; }; &usb3_dwc3 { + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + dr_mode = "peripheral"; extcon = <&extcon_usb>; }; diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi index 513fe5e76b..f5921b80ef 100644 --- a/dts/src/arm64/qcom/sdm630.dtsi +++ b/dts/src/arm64/qcom/sdm630.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include <dt-bindings/soc/qcom,apr.h> / { @@ -1100,6 +1101,7 @@ interconnect-names = "gfx-mem"; operating-points-v2 = <&gpu_sdm630_opp_table>; + #cooling-cells = <2>; status = "disabled"; @@ -1281,12 +1283,16 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB_30_GDSC>; - qcom,select-utmi-as-pipe-clk; resets = <&gcc GCC_USB_30_BCR>; @@ -1297,17 +1303,38 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - /* - * SDM630 technically supports USB3 but I - * haven't seen any devices making use of it. - */ - maximum-speed = "high-speed"; - phys = <&qusb2phy0>; - phy-names = "usb2-phy"; + phys = <&qusb2phy0>, <&usb3_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; snps,hird-threshold = /bits/ 8 <0>; }; }; + usb3_qmpphy: phy@c010000 { + compatible = "qcom,sdm660-qmp-usb3-phy"; + reg = <0x0c010000 0x1000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>; + + status = "disabled"; + }; + qusb2phy0: phy@c012000 { compatible = "qcom,sdm660-qusb2-phy"; reg = <0x0c012000 0x180>; @@ -1463,8 +1490,12 @@ <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <60000000>; - interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq"; qcom,select-utmi-as-pipe-clk; @@ -2551,6 +2582,13 @@ thermal-sensors = <&tsens 8>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&adreno_gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { gpu_alert0: trip-point0 { temperature = <90000>; diff --git a/dts/src/arm64/qcom/sdm632.dtsi b/dts/src/arm64/qcom/sdm632.dtsi index 645b9f6a80..95b025ea26 100644 --- a/dts/src/arm64/qcom/sdm632.dtsi +++ b/dts/src/arm64/qcom/sdm632.dtsi @@ -79,3 +79,11 @@ compatible = "qcom,kryo250"; capacity-dmips-mhz = <1980>; }; + +&gpu_opp_table { + opp-725000000 { + opp-hz = /bits/ 64 <725000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; +}; diff --git a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts index 3c47410ba9..7167f75bce 100644 --- a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts +++ b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts @@ -413,10 +413,16 @@ }; &usb3 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; }; &usb3_dwc3 { + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + dr_mode = "peripheral"; extcon = <&extcon_usb>; }; diff --git a/dts/src/arm64/qcom/sdm670.dtsi b/dts/src/arm64/qcom/sdm670.dtsi index 4d7b77a231..80e81c4233 100644 --- a/dts/src/arm64/qcom/sdm670.dtsi +++ b/dts/src/arm64/qcom/sdm670.dtsi @@ -1320,12 +1320,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; diff --git a/dts/src/arm64/qcom/sdm845-cheza.dtsi b/dts/src/arm64/qcom/sdm845-cheza.dtsi index 0ab5e8f53a..e8276db9ea 100644 --- a/dts/src/arm64/qcom/sdm845-cheza.dtsi +++ b/dts/src/arm64/qcom/sdm845-cheza.dtsi @@ -852,6 +852,7 @@ ap_ts_i2c: &i2c14 { pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts index ab62204565..1f51732819 100644 --- a/dts/src/arm64/qcom/sdm845-db845c.dts +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -580,7 +580,7 @@ &pcie0 { status = "okay"; perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&pcie0_3p3v_dual>; diff --git a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi index e821103d49..46e25c5382 100644 --- a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi +++ b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi @@ -508,13 +508,13 @@ }; &q6afedai { - qi2s@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <1>; }; - qi2s@23 { - reg = <23>; + dai@23 { + reg = <QUATERNARY_MI2S_TX>; qcom,sd-lines = <0>; }; }; diff --git a/dts/src/arm64/qcom/sdm845-shift-axolotl.dts b/dts/src/arm64/qcom/sdm845-shift-axolotl.dts index fbb8655653..486ce175e6 100644 --- a/dts/src/arm64/qcom/sdm845-shift-axolotl.dts +++ b/dts/src/arm64/qcom/sdm845-shift-axolotl.dts @@ -60,7 +60,7 @@ }; reserved-memory { - framebuffer_region@9d400000 { + framebuffer@9d400000 { reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; no-map; }; diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index c224482435..2f20be99ee 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -2639,10 +2639,12 @@ compatible = "qcom,sdm845-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -3366,8 +3368,8 @@ qcom,qmp = <&aoss_qmp>; - power-domains = <&rpmhpd SDM845_CX>, - <&rpmhpd SDM845_MX>; + power-domains = <&rpmhpd SDM845_LCX>, + <&rpmhpd SDM845_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; @@ -4058,12 +4060,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -4109,12 +4115,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>, - <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -4760,6 +4770,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; @@ -5568,7 +5579,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5588,7 +5599,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5602,8 +5613,15 @@ thermal-sensors = <&tsens0 11>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -5617,8 +5635,15 @@ thermal-sensors = <&tsens0 12>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/dts/src/arm64/qcom/sm4450.dtsi b/dts/src/arm64/qcom/sm4450.dtsi index 3e7ae3bebb..603c962661 100644 --- a/dts/src/arm64/qcom/sm4450.dtsi +++ b/dts/src/arm64/qcom/sm4450.dtsi @@ -17,7 +17,7 @@ chosen { }; - clocks{ + clocks { xo_board: xo-board { compatible = "fixed-clock"; clock-frequency = <76800000>; diff --git a/dts/src/arm64/qcom/sm6115.dtsi b/dts/src/arm64/qcom/sm6115.dtsi index f9849b8bef..aca0a87092 100644 --- a/dts/src/arm64/qcom/sm6115.dtsi +++ b/dts/src/arm64/qcom/sm6115.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/interconnect/qcom,sm6115.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -614,6 +615,11 @@ #hwlock-cells = <1>; }; + tcsr_regs: syscon@3c0000 { + compatible = "qcom,sm6115-tcsr", "syscon"; + reg = <0x0 0x003c0000 0x0 0x40000>; + }; + tlmm: pinctrl@500000 { compatible = "qcom,sm6115-tlmm"; reg = <0x0 0x00500000 0x0 0x400000>, @@ -878,8 +884,31 @@ clock-output-names = "usb3_phy_pipe_clk_src"; #phy-cells = <0>; + orientation-switch; + + qcom,tcsr-reg = <&tcsr_regs 0xb244>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + }; }; system_noc: interconnect@1880000 { @@ -1194,8 +1223,12 @@ compatible = "qcom,sm6115-qmp-ufs-phy"; reg = <0x0 0x04807000 0x0 0x1000>; - clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1589,9 +1622,14 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <66666667>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; @@ -1603,7 +1641,6 @@ interconnect-names = "usb-ddr", "apps-usb"; - qcom,select-utmi-as-pipe-clk; status = "disabled"; usb_dwc3: usb@4e00000 { @@ -1618,6 +1655,28 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; + + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_qmpphy_usb_ss_in>; + }; + }; + }; }; }; @@ -1649,6 +1708,7 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; @@ -3088,7 +3148,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3114,7 +3174,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3140,7 +3200,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3166,7 +3226,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3192,7 +3252,7 @@ type = "passive"; }; - cpu45_crit: cpu_crit { + cpu45_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3218,7 +3278,7 @@ type = "passive"; }; - cpu67_crit: cpu_crit { + cpu67_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3244,7 +3304,7 @@ type = "passive"; }; - cpu0123_crit: cpu_crit { + cpu0123_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3297,8 +3357,15 @@ polling-delay = <0>; thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu_alert0: trip-point0 { temperature = <115000>; hysteresis = <5000>; type = "passive"; @@ -3307,7 +3374,7 @@ trip-point1 { temperature = <125000>; hysteresis = <1000>; - type = "passive"; + type = "critical"; }; }; }; diff --git a/dts/src/arm64/qcom/sm6125.dtsi b/dts/src/arm64/qcom/sm6125.dtsi index 1dd3a4056e..98ab083560 100644 --- a/dts/src/arm64/qcom/sm6125.dtsi +++ b/dts/src/arm64/qcom/sm6125.dtsi @@ -812,10 +812,12 @@ compatible = "qcom,sm6125-qmp-ufs-phy"; reg = <0x04807000 0xdb8>; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1185,9 +1187,14 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <66666667>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; qcom,select-utmi-as-pipe-clk; diff --git a/dts/src/arm64/qcom/sm6350.dtsi b/dts/src/arm64/qcom/sm6350.dtsi index 43cffe8e12..24bcec3366 100644 --- a/dts/src/arm64/qcom/sm6350.dtsi +++ b/dts/src/arm64/qcom/sm6350.dtsi @@ -19,6 +19,7 @@ #include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -1189,10 +1190,12 @@ compatible = "qcom,sm6350-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1325,10 +1328,11 @@ qcom,gmu = <&gmu>; nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; @@ -1439,8 +1443,6 @@ operating-points-v2 = <&gmu_opp_table>; - status = "disabled"; - gmu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1830,12 +1832,15 @@ "mock_utmi"; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -1966,6 +1971,13 @@ interrupt-controller; #interrupt-cells = <1>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; @@ -2698,6 +2710,569 @@ }; }; + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-left-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_left_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-left-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_left_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-right-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu6_right_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-right-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_right_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-left-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu7_left_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-left-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_left_alert0>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-right-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu7_right_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-right-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_right_alert0>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpuss0-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpuss1-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + modem-core0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + modem-core0-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem-core1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem-core1-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem-scl-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem-scl-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem-vec-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + modem-vec-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + npu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6-hvx-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + video-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; clock-frequency = <19200000>; diff --git a/dts/src/arm64/qcom/sm6375.dtsi b/dts/src/arm64/qcom/sm6375.dtsi index 7ac8bf26dd..4386f8a9c6 100644 --- a/dts/src/arm64/qcom/sm6375.dtsi +++ b/dts/src/arm64/qcom/sm6375.dtsi @@ -1431,13 +1431,15 @@ assigned-clock-rates = <19200000>, <133333333>; interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, - <&mpm 12 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 94 IRQ_TYPE_EDGE_BOTH>, <&mpm 93 IRQ_TYPE_EDGE_BOTH>, - <&mpm 94 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; diff --git a/dts/src/arm64/qcom/sm7125-xiaomi-common.dtsi b/dts/src/arm64/qcom/sm7125-xiaomi-common.dtsi index e55cd83c19..29289fa41b 100644 --- a/dts/src/arm64/qcom/sm7125-xiaomi-common.dtsi +++ b/dts/src/arm64/qcom/sm7125-xiaomi-common.dtsi @@ -152,6 +152,9 @@ regulator-min-microvolt = <824000>; regulator-max-microvolt = <928000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l5a_2p7: ldo5 { @@ -188,6 +191,9 @@ regulator-min-microvolt = <1696000>; regulator-max-microvolt = <1952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a_1p8: ldo13 { @@ -230,6 +236,9 @@ regulator-min-microvolt = <2696000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; @@ -258,6 +267,9 @@ regulator-min-microvolt = <1144000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c_1p8: ldo4 { @@ -398,6 +410,20 @@ }; }; +&ufs_mem_hc { + vcc-supply = <&vreg_l19a_3p0>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l12a_1p8>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a_0p88>; + vdda-pll-supply = <&vreg_l3c_1p23>; + status = "okay"; +}; + &usb_1 { qcom,select-utmi-as-pipe-clk; status = "okay"; diff --git a/dts/src/arm64/qcom/sm7125-xiaomi-curtana.dts b/dts/src/arm64/qcom/sm7125-xiaomi-curtana.dts new file mode 100644 index 0000000000..12f517a849 --- /dev/null +++ b/dts/src/arm64/qcom/sm7125-xiaomi-curtana.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Joe Mason <buddyjojo06@outlook.com> + */ + +/dts-v1/; + +#include "sm7125-xiaomi-common.dtsi" + +/ { + model = "Xiaomi Redmi Note 9S"; + compatible = "xiaomi,curtana", "qcom,sm7125"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0x20022 1>; +}; diff --git a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts index ade6198055..bc67e8c1fe 100644 --- a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts +++ b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts @@ -68,6 +68,14 @@ }; }; + /* Dummy regulator until PM6150L has LCDB VSP/VSN support */ + lcdb_dummy: regulator-lcdb-dummy { + compatible = "regulator-fixed"; + regulator-name = "lcdb_dummy"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + }; + reserved-memory { /* * The rmtfs memory region in downstream is 'dynamically allocated' @@ -116,7 +124,7 @@ }; &adsp { - firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; + firmware-name = "qcom/sm7225/fairphone4/adsp.mbn"; status = "okay"; }; @@ -361,7 +369,7 @@ }; &cdsp { - firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; + firmware-name = "qcom/sm7225/fairphone4/cdsp.mbn"; status = "okay"; }; @@ -373,6 +381,14 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sm7225/fairphone4/a615_zap.mbn"; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -400,12 +416,49 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; - firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt"; + firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mbn"; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l22a>; + status = "okay"; + + panel@0 { + compatible = "djn,9a-3r063-1102b"; + reg = <0>; + + backlight = <&pm6150l_wled>; + reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>; + + vdd1-supply = <&vreg_l1e>; + vsn-supply = <&lcdb_dummy>; + vsp-supply = <&lcdb_dummy>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l18a>; status = "okay"; }; &mpss { - firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; + firmware-name = "qcom/sm7225/fairphone4/modem.mbn"; status = "okay"; }; diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi index 761a6757dc..a35c0852b5 100644 --- a/dts/src/arm64/qcom/sm8150.dtsi +++ b/dts/src/arm64/qcom/sm8150.dtsi @@ -967,7 +967,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@133 { + gpu_speed_bin: gpu-speed-bin@133 { reg = <0x133 0x1>; bits = <5 3>; }; @@ -1843,8 +1843,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1858,14 +1872,16 @@ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&rpmhcc RPMH_CXO_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", - "tbu"; + "tbu", + "ref"; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1879,7 +1895,7 @@ phy-names = "pciephy"; perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; - enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; @@ -1934,8 +1950,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1949,14 +1979,16 @@ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&rpmhcc RPMH_CXO_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", - "tbu"; + "tbu", + "ref"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2063,10 +2095,12 @@ compatible = "qcom,sm8150-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + "ref_aux", + "qref"; power-domains = <&gcc UFS_PHY_GDSC>; @@ -2198,6 +2232,7 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; @@ -2428,7 +2463,7 @@ bias-disable; }; - qup_spi6_default: qup-spi6_default-state { + qup_spi6_default: qup-spi6-default-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "qup6"; drive-strength = <6>; @@ -2442,7 +2477,7 @@ bias-disable; }; - qup_spi7_default: qup-spi7_default-state { + qup_spi7_default: qup-spi7-default-state { pins = "gpio98", "gpio99", "gpio100", "gpio101"; function = "qup7"; drive-strength = <6>; @@ -3573,12 +3608,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -3645,12 +3684,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>, - <&pdc 11 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -5067,7 +5110,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5087,7 +5130,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -5101,8 +5144,15 @@ thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -5281,8 +5331,15 @@ thermal-sensors = <&tsens1 11>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/dts/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi b/dts/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi index 946365f15a..6f54f50a70 100644 --- a/dts/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/dts/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com> + * Copyright (c) 2022-2024 Jianhua Lu <lujianhua000@gmail.com> */ #include <dt-bindings/arm/qcom,ids.h> @@ -551,6 +551,7 @@ vddio-supply = <&vreg_l14a_1p88>; reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; backlight = <&backlight>; + rotation = <90>; status = "disabled"; diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi index 760501c130..39bd8f0eba 100644 --- a/dts/src/arm64/qcom/sm8250.dtsi +++ b/dts/src/arm64/qcom/sm8250.dtsi @@ -975,7 +975,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@19b { + gpu_speed_bin: gpu-speed-bin@19b { reg = <0x19b 0x1>; bits = <5 3>; }; @@ -2152,8 +2152,14 @@ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2248,8 +2254,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2349,8 +2369,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2506,10 +2540,12 @@ compatible = "qcom,sm8250-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; - clock-names = "ref", - "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1X_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2888,6 +2924,7 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; status = "disabled"; @@ -4128,14 +4165,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; wakeup-source; @@ -4197,14 +4236,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; wakeup-source; @@ -6757,7 +6798,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -6777,7 +6818,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -6791,8 +6832,15 @@ thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -6926,8 +6974,15 @@ thermal-sensors = <&tsens1 8>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi index e78c83a897..a5e7dbbd8c 100644 --- a/dts/src/arm64/qcom/sm8350.dtsi +++ b/dts/src/arm64/qcom/sm8350.dtsi @@ -1526,8 +1526,14 @@ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1611,8 +1617,22 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1726,10 +1746,12 @@ compatible = "qcom,sm8350-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; - clock-names = "ref", - "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1847,6 +1869,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -2312,14 +2335,16 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -2385,14 +2410,16 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -4165,7 +4192,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster0_crit: cluster0_crit { + cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4185,7 +4212,7 @@ hysteresis = <2000>; type = "hot"; }; - cluster1_crit: cluster1_crit { + cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4214,8 +4241,15 @@ thermal-sensors = <&tsens1 1>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu1_alert0: trip-point0 { + gpu_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <1000>; type = "hot"; @@ -4229,8 +4263,15 @@ thermal-sensors = <&tsens1 2>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu2_alert0: trip-point0 { + gpu_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <1000>; type = "hot"; diff --git a/dts/src/arm64/qcom/sm8450-hdk.dts b/dts/src/arm64/qcom/sm8450-hdk.dts index a20d5d76af..0786cff07b 100644 --- a/dts/src/arm64/qcom/sm8450-hdk.dts +++ b/dts/src/arm64/qcom/sm8450-hdk.dts @@ -938,8 +938,8 @@ "TX DMIC3", "MIC BIAS1", "TX SWR_INPUT0", "ADC1_OUTPUT", "TX SWR_INPUT1", "ADC2_OUTPUT", - "TX SWR_INPUT2", "ADC3_OUTPUT", - "TX SWR_INPUT3", "ADC4_OUTPUT"; + "TX SWR_INPUT0", "ADC3_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -1147,7 +1147,7 @@ }; &vamacro { - pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; vdd-micb-supply = <&vreg_s10b_1p8>; qcom,dmic-sample-rate = <600000>; diff --git a/dts/src/arm64/qcom/sm8450.dtsi b/dts/src/arm64/qcom/sm8450.dtsi index 01e4dfc4ba..b86be34a91 100644 --- a/dts/src/arm64/qcom/sm8450.dtsi +++ b/dts/src/arm64/qcom/sm8450.dtsi @@ -1028,6 +1028,12 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart20_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1420,6 +1426,12 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; }; @@ -1772,8 +1784,22 @@ msi-map = <0x0 &gic_its 0x5981 0x1>, <0x100 &gic_its 0x5980 0x1>; msi-map-mask = <0xff00>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1881,8 +1907,22 @@ msi-map = <0x0 &gic_its 0x5a01 0x1>, <0x100 &gic_its 0x5a00 0x1>; msi-map-mask = <0xff00>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2038,6 +2078,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -3934,7 +3975,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -4485,13 +4526,15 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -4890,6 +4933,13 @@ polling-delay = <0>; thermal-sensors = <&tsens0 14>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -4909,7 +4959,7 @@ type = "passive"; }; - gpu0_tj_cfg: tj-cfg { + gpu_top_alert0: trip-point0 { temperature = <95000>; hysteresis = <5000>; type = "passive"; @@ -4922,6 +4972,13 @@ polling-delay = <0>; thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -4941,7 +4998,7 @@ type = "passive"; }; - gpu1_tj_cfg: tj-cfg { + gpu_bottom_alert0: trip-point0 { temperature = <95000>; hysteresis = <5000>; type = "passive"; diff --git a/dts/src/arm64/qcom/sm8550-hdk.dts b/dts/src/arm64/qcom/sm8550-hdk.dts new file mode 100644 index 0000000000..12d60a0ee0 --- /dev/null +++ b/dts/src/arm64/qcom/sm8550-hdk.dts @@ -0,0 +1,1306 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 HDK"; + compatible = "qcom,sm8550-hdk", "qcom,sm8550"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart7; + serial1 = &uart14; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_out: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 159 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 160 GPIO_ACTIVE_HIGH>; + default-state = "off"; + panic-indicator; + }; + + led-2 { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_ORANGE>; + gpios = <&tlmm 162 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + lt9611_1v2: regulator-lt9611-1v2 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + gpio = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vreg_bob_3v3>; + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_bob_3v3: regulator-vreg-bob-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_BOB_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-HDK"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + qcom,pmic-id = "c"; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* ldo2 supplies SM8550 VDD_LPI_MX */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + qcom,pmic-id = "e"; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "f"; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "g"; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_s6g_1p86>; + vdd-l7-supply = <&vreg_bob1>; + + qcom,pmic-id = "m"; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + qcom,pmic-id = "n"; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 8 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + }; +}; + +&i2c_hub_2 { + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob1>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8550/ipa_fws.mbn"; + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; + }; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; + data-lanes = <0 1>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3c_0p9>; + vdda-pll-supply = <&vreg_l3e_1p2>; + vdda-qref-supply = <&vreg_l1e_0p88>; + + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + input-enable; + output-disable; + bias-pull-up; + power-source = <1>; /* 1.8 V */ + }; + + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +/* The RGB signals are routed to 3 separate LEDs on the HDK8550 */ +&pm8550_pwm { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + + /* + * WCD9385 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9385 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9385 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9385 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9385 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + + /* + * WCD9385 TX Port 1 (ADC1,2) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9385 TX Port 2 (ADC3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9385 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9385 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio82"; + function = "gpio"; + bias-pull-down; + }; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio8"; + function = "gpio"; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio7"; + function = "gpio"; + output-high; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart7 { + status = "okay"; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s4e_0p95>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa0p8-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p9-supply = <&vreg_s6g_1p86>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; + + orientation-switch; + + status = "okay"; +}; + +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/dts/src/arm64/qcom/sm8550-mtp.dts b/dts/src/arm64/qcom/sm8550-mtp.dts index c1135ad5fa..3d4ad5aac7 100644 --- a/dts/src/arm64/qcom/sm8550-mtp.dts +++ b/dts/src/arm64/qcom/sm8550-mtp.dts @@ -106,14 +106,21 @@ "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "TX DMIC0", "MIC BIAS1", "TX DMIC1", "MIC BIAS2", "TX DMIC2", "MIC BIAS3", - "TX SWR_ADC1", "ADC2_OUTPUT"; + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT0", "ADC3_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -874,7 +881,7 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - qcom,tx-port-mapping = <1 1 2 3>; + qcom,tx-port-mapping = <2 2 3 4>; }; }; diff --git a/dts/src/arm64/qcom/sm8550-qrd.dts b/dts/src/arm64/qcom/sm8550-qrd.dts index d401d63e5c..92f0150174 100644 --- a/dts/src/arm64/qcom/sm8550-qrd.dts +++ b/dts/src/arm64/qcom/sm8550-qrd.dts @@ -124,14 +124,21 @@ "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "TX DMIC0", "MIC BIAS1", "TX DMIC1", "MIC BIAS2", "TX DMIC2", "MIC BIAS3", - "TX SWR_ADC1", "ADC2_OUTPUT"; + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT0", "ADC3_OUTPUT", + "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -724,6 +731,10 @@ <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; }; +&gpi_dma1 { + status = "okay"; +}; + &gpu { status = "okay"; @@ -960,6 +971,30 @@ }; }; +&spi4 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq>, <&ts_reset>; + }; +}; + &swr1 { status = "okay"; @@ -978,7 +1013,7 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - qcom,tx-port-mapping = <1 1 2 3>; + qcom,tx-port-mapping = <2 2 3 4>; }; }; @@ -1028,6 +1063,20 @@ bias-pull-down; }; + ts_irq: ts-irq-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset: ts-reset-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio108"; function = "gpio"; diff --git a/dts/src/arm64/qcom/sm8550.dtsi b/dts/src/arm64/qcom/sm8550.dtsi index ee1ba5a8c8..3904348075 100644 --- a/dts/src/arm64/qcom/sm8550.dtsi +++ b/dts/src/arm64/qcom/sm8550.dtsi @@ -1713,9 +1713,22 @@ linux,pci-domain = <0>; num-lanes = <2>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1742,6 +1755,9 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; interconnect-names = "pcie-mem", "cpu-pcie"; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1401 0x1>, + <0x100 &gic_its 0x1400 0x1>; iommu-map = <0x0 &apps_smmu 0x1400 0x1>, <0x100 &apps_smmu 0x1401 0x1>; @@ -1804,9 +1820,22 @@ linux,pci-domain = <1>; num-lanes = <2>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1838,6 +1867,9 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; interconnect-names = "pcie-mem", "cpu-pcie"; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1481 0x1>, + <0x100 &gic_its 0x1480 0x1>; iommu-map = <0x0 &apps_smmu 0x1480 0x1>, <0x100 &apps_smmu 0x1481 0x1>; @@ -1907,9 +1939,12 @@ ufs_mem_phy: phy@1d80000 { compatible = "qcom,sm8550-qmp-ufs-phy"; reg = <0x0 0x01d80000 0x0 0x2000>; - clocks = <&tcsr TCSR_UFS_CLKREF_EN>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; power-domains = <&gcc UFS_MEM_PHY_GDSC>; @@ -1940,6 +1975,7 @@ iommus = <&apps_smmu 0x60 0x0>; dma-coherent; + operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; @@ -1960,18 +1996,49 @@ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <100000000 403000000>, - <0 0>, - <0 0>, - <0 0>; qcom,ice = <&ice>; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ice: crypto@1d88000 { @@ -2012,6 +2079,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -2507,7 +2575,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -3133,13 +3201,15 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; required-opps = <&rpmhpd_opp_nom>; @@ -3248,7 +3318,7 @@ spmi_bus: spmi@c400000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c400000 0 0x3000>, - <0 0x0c500000 0 0x4000000>, + <0 0x0c500000 0 0x400000>, <0 0x0c440000 0 0x80000>, <0 0x0c4c0000 0 0x20000>, <0 0x0c42d000 0 0x4000>; @@ -4254,6 +4324,7 @@ reg = <3>; iommus = <&apps_smmu 0x1003 0x80>, <&apps_smmu 0x1063 0x0>; + dma-coherent; }; compute-cb@4 { @@ -4261,6 +4332,7 @@ reg = <4>; iommus = <&apps_smmu 0x1004 0x80>, <&apps_smmu 0x1064 0x0>; + dma-coherent; }; compute-cb@5 { @@ -4268,6 +4340,7 @@ reg = <5>; iommus = <&apps_smmu 0x1005 0x80>, <&apps_smmu 0x1065 0x0>; + dma-coherent; }; compute-cb@6 { @@ -4275,6 +4348,7 @@ reg = <6>; iommus = <&apps_smmu 0x1006 0x80>, <&apps_smmu 0x1066 0x0>; + dma-coherent; }; compute-cb@7 { @@ -4282,6 +4356,7 @@ reg = <7>; iommus = <&apps_smmu 0x1007 0x80>, <&apps_smmu 0x1067 0x0>; + dma-coherent; }; }; @@ -4388,6 +4463,7 @@ iommus = <&apps_smmu 0x1961 0x0>, <&apps_smmu 0x0c01 0x20>, <&apps_smmu 0x19c1 0x10>; + dma-coherent; }; compute-cb@2 { @@ -4396,6 +4472,7 @@ iommus = <&apps_smmu 0x1962 0x0>, <&apps_smmu 0x0c02 0x20>, <&apps_smmu 0x19c2 0x10>; + dma-coherent; }; compute-cb@3 { @@ -4404,6 +4481,7 @@ iommus = <&apps_smmu 0x1963 0x0>, <&apps_smmu 0x0c03 0x20>, <&apps_smmu 0x19c3 0x10>; + dma-coherent; }; compute-cb@4 { @@ -4412,6 +4490,7 @@ iommus = <&apps_smmu 0x1964 0x0>, <&apps_smmu 0x0c04 0x20>, <&apps_smmu 0x19c4 0x10>; + dma-coherent; }; compute-cb@5 { @@ -4420,6 +4499,7 @@ iommus = <&apps_smmu 0x1965 0x0>, <&apps_smmu 0x0c05 0x20>, <&apps_smmu 0x19c5 0x10>; + dma-coherent; }; compute-cb@6 { @@ -4428,6 +4508,7 @@ iommus = <&apps_smmu 0x1966 0x0>, <&apps_smmu 0x0c06 0x20>, <&apps_smmu 0x19c6 0x10>; + dma-coherent; }; compute-cb@7 { @@ -4436,6 +4517,7 @@ iommus = <&apps_smmu 0x1967 0x0>, <&apps_smmu 0x0c07 0x20>, <&apps_smmu 0x19c7 0x10>; + dma-coherent; }; compute-cb@8 { @@ -4444,6 +4526,7 @@ iommus = <&apps_smmu 0x1968 0x0>, <&apps_smmu 0x0c08 0x20>, <&apps_smmu 0x19c8 0x10>; + dma-coherent; }; /* note: secure cb9 in downstream */ @@ -5304,6 +5387,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 1>; + cooling-maps { + map0 { + trip = <&gpu0_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5336,6 +5426,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 2>; + cooling-maps { + map0 { + trip = <&gpu1_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5368,6 +5465,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 3>; + cooling-maps { + map0 { + trip = <&gpu2_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5400,6 +5504,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 4>; + cooling-maps { + map0 { + trip = <&gpu3_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5432,6 +5543,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 5>; + cooling-maps { + map0 { + trip = <&gpu4_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5464,6 +5582,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 6>; + cooling-maps { + map0 { + trip = <&gpu5_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5496,6 +5621,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 7>; + cooling-maps { + map0 { + trip = <&gpu6_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -5528,6 +5660,13 @@ polling-delay = <0>; thermal-sensors = <&tsens2 8>; + cooling-maps { + map0 { + trip = <&gpu7_junction_config>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; diff --git a/dts/src/arm64/qcom/sm8650-mtp.dts b/dts/src/arm64/qcom/sm8650-mtp.dts index be133a3d5c..4450273f96 100644 --- a/dts/src/arm64/qcom/sm8650-mtp.dts +++ b/dts/src/arm64/qcom/sm8650-mtp.dts @@ -66,6 +66,29 @@ }; }; + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT"; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -428,6 +451,138 @@ RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6c_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p1: ldo1 { + regulator-name = "vreg_l1m_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p96: ldo7 { + regulator-name = "vreg_l7m_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_s6c_1p8>; + vdd-l5-supply = <&vreg_bob2>; + vdd-l6-supply = <&vreg_bob2>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p056: ldo2 { + regulator-name = "vreg_l2n_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; }; &dispcc { diff --git a/dts/src/arm64/qcom/sm8650-qrd.dts b/dts/src/arm64/qcom/sm8650-qrd.dts index b9151c2ddf..b07cac2e5b 100644 --- a/dts/src/arm64/qcom/sm8650-qrd.dts +++ b/dts/src/arm64/qcom/sm8650-qrd.dts @@ -77,9 +77,83 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&redriver_ss_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&wcd_usbss_sbu_mux>; + }; + }; + }; + }; + }; + + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT2", "ADC3_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; }; }; }; @@ -94,6 +168,41 @@ regulator-always-on; regulator-boot-on; }; + + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + + mode-switch; + orientation-switch; + + port { + wcd_codec_headset_in: endpoint { + remote-endpoint = <&wcd_usbss_headset_out>; + }; + }; + }; }; &apps_rsc { @@ -436,6 +545,138 @@ RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6c_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p1: ldo1 { + regulator-name = "vreg_l1m_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p96: ldo7 { + regulator-name = "vreg_l7m_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_s6c_1p8>; + vdd-l5-supply = <&vreg_bob2>; + vdd-l6-supply = <&vreg_bob2>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p056: ldo2 { + regulator-name = "vreg_l2n_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; }; &dispcc { @@ -446,6 +687,78 @@ status = "okay"; }; +&i2c3 { + status = "okay"; + + wcd_usbss: typec-mux@e { + compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; + reg = <0xe>; + + vdd-supply = <&vreg_l15b_1p8>; + reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wcd_usbss_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + + port@1 { + reg = <1>; + + wcd_usbss_headset_out: endpoint { + remote-endpoint = <&wcd_codec_headset_in>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + data-lanes = <3 2 1 0>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; +}; + &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; @@ -453,6 +766,16 @@ status = "okay"; }; +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + &mdss { status = "okay"; }; @@ -495,6 +818,15 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + &mdss_mdp { status = "okay"; }; @@ -600,6 +932,11 @@ status = "okay"; }; +&qup_i2c3_data_clk { + /* Use internal I2C pull-up */ + bias-pull-up = <2200>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -657,6 +994,74 @@ }; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker Left */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; + + /* WSA8845, Speaker Right */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { /* Reserved I/Os for NFC */ gpio-reserved-ranges = <32 8>, <74 1>; @@ -704,6 +1109,14 @@ bias-pull-down; }; + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + ts_irq: ts-irq-state { pins = "gpio161"; function = "gpio"; @@ -718,6 +1131,14 @@ drive-strength = <8>; bias-pull-up; }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart14 { @@ -787,7 +1208,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -803,9 +1224,23 @@ vdda-phy-supply = <&vreg_l3i_1p2>; vdda-pll-supply = <&vreg_l3g_0p91>; + orientation-switch; + status = "okay"; }; +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + &xo_board { clock-frequency = <76800000>; }; diff --git a/dts/src/arm64/qcom/sm8650.dtsi b/dts/src/arm64/qcom/sm8650.dtsi index 2df77123a8..ba72d8f384 100644 --- a/dts/src/arm64/qcom/sm8650.dtsi +++ b/dts/src/arm64/qcom/sm8650.dtsi @@ -525,6 +525,11 @@ no-map; }; + qlink_logging_mem: qlink-logging@84800000 { + reg = <0 0x84800000 0 0x200000>; + no-map; + }; + mpss_dsm_mem: mpss-dsm@86b00000 { reg = <0 0x86b00000 0 0x4900000>; no-map; @@ -1228,7 +1233,7 @@ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; @@ -1250,7 +1255,7 @@ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; clock-names = "se"; - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; @@ -2213,8 +2218,22 @@ <0 0x60100000 0 0x100000>; reg-names = "parf", "dbi", "elbi", "atu", "config"; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, @@ -2255,6 +2274,11 @@ interrupt-map-mask = <0 0 0 0x7>; #interrupt-cells = <1>; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1401 0x1>, + <0x100 &gic_its 0x1400 0x1>; + msi-map-mask = <0xff00>; + linux,pci-domain = <0>; num-lanes = <2>; bus-range = <0 0xff>; @@ -2317,8 +2341,22 @@ "atu", "config"; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -2364,6 +2402,11 @@ interrupt-map-mask = <0 0 0 0x7>; #interrupt-cells = <1>; + /* Entries are reversed due to the unusual ITS DeviceID encoding */ + msi-map = <0x0 &gic_its 0x1481 0x1>, + <0x100 &gic_its 0x1480 0x1>; + msi-map-mask = <0xff00>; + linux,pci-domain = <1>; num-lanes = <2>; bus-range = <0 0xff>; @@ -2448,10 +2491,12 @@ compatible = "qcom,sm8650-qmp-ufs-phy"; reg = <0 0x01d80000 0 0x2000>; - clocks = <&tcsr TCSR_UFS_CLKREF_EN>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; clock-names = "ref", - "ref_aux"; + "ref_aux", + "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2627,7 +2672,8 @@ "mss"; memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, - <&mpss_dsm_mem>, <&mpss_dsm_mem_2>; + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>, + <&qlink_logging_mem>; qcom,qmp = <&aoss_qmp>; @@ -2919,7 +2965,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -3703,7 +3749,7 @@ spmi_bus: spmi@c400000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c400000 0 0x3000>, - <0 0x0c500000 0 0x4000000>, + <0 0x0c500000 0 0x400000>, <0 0x0c440000 0 0x80000>, <0 0x0c4c0000 0 0x20000>, <0 0x0c42d000 0 0x4000>; @@ -4808,6 +4854,7 @@ iommus = <&apps_smmu 0x1003 0x80>, <&apps_smmu 0x1043 0x20>; + dma-coherent; }; compute-cb@4 { @@ -4816,6 +4863,7 @@ iommus = <&apps_smmu 0x1004 0x80>, <&apps_smmu 0x1044 0x20>; + dma-coherent; }; compute-cb@5 { @@ -4824,6 +4872,7 @@ iommus = <&apps_smmu 0x1005 0x80>, <&apps_smmu 0x1045 0x20>; + dma-coherent; }; compute-cb@6 { @@ -4832,6 +4881,7 @@ iommus = <&apps_smmu 0x1006 0x80>, <&apps_smmu 0x1046 0x20>; + dma-coherent; }; compute-cb@7 { @@ -4841,6 +4891,7 @@ iommus = <&apps_smmu 0x1007 0x40>, <&apps_smmu 0x1067 0x0>, <&apps_smmu 0x1087 0x0>; + dma-coherent; }; }; @@ -4961,6 +5012,7 @@ iommus = <&apps_smmu 0x1961 0x0>, <&apps_smmu 0x0c01 0x20>, <&apps_smmu 0x19c1 0x0>; + dma-coherent; }; compute-cb@2 { @@ -4970,6 +5022,7 @@ iommus = <&apps_smmu 0x1962 0x0>, <&apps_smmu 0x0c02 0x20>, <&apps_smmu 0x19c2 0x0>; + dma-coherent; }; compute-cb@3 { @@ -4979,6 +5032,7 @@ iommus = <&apps_smmu 0x1963 0x0>, <&apps_smmu 0x0c03 0x20>, <&apps_smmu 0x19c3 0x0>; + dma-coherent; }; compute-cb@4 { @@ -4988,6 +5042,7 @@ iommus = <&apps_smmu 0x1964 0x0>, <&apps_smmu 0x0c04 0x20>, <&apps_smmu 0x19c4 0x0>; + dma-coherent; }; compute-cb@5 { @@ -4997,6 +5052,7 @@ iommus = <&apps_smmu 0x1965 0x0>, <&apps_smmu 0x0c05 0x20>, <&apps_smmu 0x19c5 0x0>; + dma-coherent; }; compute-cb@6 { @@ -5006,6 +5062,7 @@ iommus = <&apps_smmu 0x1966 0x0>, <&apps_smmu 0x0c06 0x20>, <&apps_smmu 0x19c6 0x0>; + dma-coherent; }; compute-cb@7 { @@ -5015,6 +5072,7 @@ iommus = <&apps_smmu 0x1967 0x0>, <&apps_smmu 0x0c07 0x20>, <&apps_smmu 0x19c7 0x0>; + dma-coherent; }; compute-cb@8 { @@ -5024,6 +5082,7 @@ iommus = <&apps_smmu 0x1968 0x0>, <&apps_smmu 0x0c08 0x20>, <&apps_smmu 0x19c8 0x0>; + dma-coherent; }; }; }; diff --git a/dts/src/arm64/qcom/x1e80100-crd.dts b/dts/src/arm64/qcom/x1e80100-crd.dts index 7532d8eca2..6a0a54532e 100644 --- a/dts/src/arm64/qcom/x1e80100-crd.dts +++ b/dts/src/arm64/qcom/x1e80100-crd.dts @@ -18,10 +18,124 @@ serial0 = &uart21; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-CRD"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TwitterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TwitterRight IN", "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "VA DMIC2", "VA MIC BIAS1", + "VA DMIC3", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -401,10 +515,251 @@ }; }; +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + &qupv3_2 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + /* pinctrl in left_woofer node because of sharing the GPIO*/ + powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TwitterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&swr3 { + status = "okay"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + /* pinctrl in right_woofer node because of sharing the GPIO*/ + powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TwitterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; +}; + &tlmm { gpio-reserved-ranges = <34 2>, /* Unused */ <44 4>, /* SPI (TPM) */ @@ -416,9 +771,104 @@ drive-strength = <16>; bias-disable; }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; }; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; diff --git a/dts/src/arm64/qcom/x1e80100-qcp.dts b/dts/src/arm64/qcom/x1e80100-qcp.dts index a37ad9475c..e76d29053d 100644 --- a/dts/src/arm64/qcom/x1e80100-qcp.dts +++ b/dts/src/arm64/qcom/x1e80100-qcp.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -31,6 +32,23 @@ regulator-always-on; regulator-boot-on; }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; }; &apps_rsc { @@ -243,7 +261,7 @@ qcom,pmic-id = "e"; vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vph_pwr>; + vdd-l3-supply = <&vreg_s5j_1p2>; vreg_l2e_0p8: ldo2 { regulator-name = "vreg_l2e_0p8"; @@ -349,7 +367,7 @@ qcom,pmic-id = "j"; vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vph_pwr>; + vdd-l2-supply = <&vreg_s5j_1p2>; vdd-l3-supply = <&vreg_s1f_0p7>; vdd-s5-supply = <&vph_pwr>; @@ -383,17 +401,170 @@ }; }; +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + &qupv3_2 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <33 3>, /* Unused */ <44 4>, /* SPI (TPM) */ <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; }; &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; }; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; diff --git a/dts/src/arm64/qcom/x1e80100.dtsi b/dts/src/arm64/qcom/x1e80100.dtsi index 6f75fc342c..8e517f7618 100644 --- a/dts/src/arm64/qcom/x1e80100.dtsi +++ b/dts/src/arm64/qcom/x1e80100.dtsi @@ -4,14 +4,20 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,x1e80100-dispcc.h> #include <dt-bindings/clock/qcom,x1e80100-gcc.h> +#include <dt-bindings/clock/qcom,x1e80100-tcsr.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> / { interrupt-parent = <&intc>; @@ -395,16 +401,24 @@ CLUSTER_PD0: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + power-domains = <&SYSTEM_PD>; }; CLUSTER_PD1: power-domain-cpu-cluster1 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + power-domains = <&SYSTEM_PD>; }; CLUSTER_PD2: power-domain-cpu-cluster2 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + power-domains = <&SYSTEM_PD>; + }; + + SYSTEM_PD: power-domain-system { + #power-domain-cells = <0>; + /* TODO: system-wide idle states */ }; }; @@ -662,6 +676,58 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -677,13 +743,13 @@ clocks = <&bi_tcxo_div2>, <&sleep_clk>, <0>, + <&pcie4_phy>, <0>, + <&pcie6a_phy>, <0>, - <0>, - <0>, - <0>, - <0>, - <0>; + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; @@ -691,6 +757,17 @@ #power-domain-cells = <1>; }; + ipcc: mailbox@408000 { + compatible = "qcom,x1e80100-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + gpi_dma2: dma-controller@800000 { compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00800000 0 0x60000>; @@ -1139,7 +1216,7 @@ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; clock-names = "se"; - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; @@ -2428,6 +2505,126 @@ }; }; + usb_1_ss0_hsphy: phy@fd3000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fd3000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_1_ss0_qmpphy: phy@fd5000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fd5000 0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_0_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1_ss1_hsphy: phy@fd9000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fd9000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_ss1_qmpphy: phy@fda000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fda000 0 0x4000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_1_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1_ss2_hsphy: phy@fde000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fde000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_TERT_BCR>; + + status = "disabled"; + }; + + usb_1_ss2_qmpphy: phy@fdf000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fdf000 0 0x4000>; + + clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_2_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_TERT_BCR>, + <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + cnoc_main: interconnect@1500000 { compatible = "qcom,x1e80100-cnoc-main"; reg = <0 0x1500000 0 0x14400>; @@ -2536,12 +2733,258 @@ #interconnect-cells = <2>; }; + pcie6a: pci@1bf8000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01bf8000 0 0x3000>, + <0 0x70000000 0 0xf1d>, + <0 0x70000f20 0 0xa8>, + <0 0x70001000 0 0x1000>, + <0 0x70100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>, + <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>; + bus-range = <0 0xff>; + + dma-coherent; + + linux,pci-domain = <7>; + num-lanes = <2>; + + interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_6A_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_6A_BCR>, + <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_6A_GDSC>; + + phys = <&pcie6a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie6a_phy: phy@1bfc000 { + compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy"; + reg = <0 0x01bfc000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_6A_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_6A_PHY_BCR>, + <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie6a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie4: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x7c000000 0 0xf1d>, + <0 0x7c000f40 0 0xa8>, + <0 0x7c001000 0 0x1000>, + <0 0x7c100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>, + <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>, + <&gcc GCC_PCIE_4_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie4_phy: phy@1c0e000 { + compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; #hwlock-cells = <1>; }; + tcsr: clock-controller@1fc0000 { + compatible = "qcom,x1e80100-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + gem_noc: interconnect@26400000 { compatible = "qcom,x1e80100-gem-noc"; reg = <0 0x26400000 0 0x311200>; @@ -2560,6 +3003,331 @@ #interconnect-cells = <2>; }; + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + #sound-dai-cells = <1>; + sound-name-prefix = "WSA2"; + }; + + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,x1e80100-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <1>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,x1e80100-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + sound-name-prefix = "WSA"; + }; + + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + label = "TX"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <1>; + + qcom,ports-sinterval-low = /bits/ 8 <0x00 0x01 0x03 0x03 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x01 0x02 0x00 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0x00 0x00 0x01 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,x1e80100-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", + "macro", + "dcodec"; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,x1e80100-lpass-lpi-pinctrl", "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0 0x06e80000 0 0x20000>, + <0 0x07250000 0 0x10000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic23_default: dmic23-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + lpass_ag_noc: interconnect@7e40000 { compatible = "qcom,x1e80100-lpass-ag-noc"; reg = <0 0x7e40000 0 0xE080>; @@ -2587,6 +3355,849 @@ #interconnect-cells = <2>; }; + usb_2_hsphy: phy@88e0000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e0000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>; + + status = "disabled"; + }; + + usb_1_ss2: usb@a0f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a0f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_SLEEP_CLK>, + <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 58 IRQ_TYPE_EDGE_BOTH>, + <&pdc 57 IRQ_TYPE_EDGE_BOTH>, + <&pdc 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_TERT_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_TERT_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss2_dwc3: usb@a000000 { + compatible = "snps,dwc3"; + reg = <0 0x0a000000 0 0xcd00>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x14a0 0x0>; + + phys = <&usb_1_ss2_hsphy>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + + port { + usb_1_ss2_role_switch: endpoint { + }; + }; + }; + }; + + usb_2: usb@a2f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a2f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 50 IRQ_TYPE_EDGE_BOTH>, + <&pdc 49 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc GCC_USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a200000 { + compatible = "snps,dwc3"; + reg = <0 0x0a200000 0 0xcd00>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x14e0 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + + port { + usb_2_role_switch: endpoint { + }; + }; + }; + }; + + usb_1_ss0: usb@a6f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 61 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1420 0x0>; + + phys = <&usb_1_ss0_hsphy>, + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + + port { + usb_1_ss0_role_switch: endpoint { + }; + }; + }; + }; + + usb_1_ss1: usb@a8f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 60 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, + <&pdc 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1460 0x0>; + + phys = <&usb_1_ss1_hsphy>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + + port { + usb_1_ss1_role_switch: endpoint { + }; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,x1e80100-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,x1e80100-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + + mdss_intf4_out: endpoint { + remote-endpoint = <&mdss_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + + mdss_intf5_out: endpoint { + remote-endpoint = <&mdss_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + + mdss_intf6_out: endpoint { + remote-endpoint = <&mdss_dp2_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + }; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@ae98000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae99000 0 0x400>, + <0 0xae99400 0 0x400>; + + interrupts-extended = <&mdss 13>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp1_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp1_in: endpoint { + remote-endpoint = <&mdss_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp1_out: endpoint { + }; + }; + }; + + mdss_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp2: displayport-controller@ae9a000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9b000 0 0x400>, + <0 0xae9b400 0 0x400>; + + interrupts-extended = <&mdss 14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp2_phy 0>, + <&mdss_dp2_phy 1>; + + operating-points-v2 = <&mdss_dp2_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dp2_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp2_in: endpoint { + remote-endpoint = <&mdss_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp3: displayport-controller@aea0000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0x600>, + <0 0xaea1000 0 0x400>, + <0 0xaea1400 0 0x400>; + + interrupts-extended = <&mdss 15>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp3_phy 0>, + <&mdss_dp3_phy 1>; + + operating-points-v2 = <&mdss_dp3_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dp3_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp3_in: endpoint { + remote-endpoint = <&mdss_intf5_out>; + + link-frequencies = /bits/ 64 <8100000000>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + }; + + mdss_dp2_phy: phy@aec2a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp3_phy: phy@aec5a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,x1e80100-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, /* dsi0 */ + <0>, + <0>, /* dsi1 */ + <0>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */ + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */ + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss_dp2_phy 0>, /* dp2 */ + <&mdss_dp2_phy 1>, + <&mdss_dp3_phy 0>, /* dp3 */ + <&mdss_dp3_phy 1>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,x1e80100-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2599,6 +4210,18 @@ interrupt-controller; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,x1e80100-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + tlmm: pinctrl@f100000 { compatible = "qcom,x1e80100-tlmm"; reg = <0 0x0f100000 0 0xf00000>; @@ -3170,7 +4793,7 @@ /* TX, RX */ pins = "gpio86", "gpio87"; function = "qup2_se5"; - drive-strength= <2>; + drive-strength = <2>; bias-disable; }; }; @@ -3315,7 +4938,6 @@ <0 0x17510000 0 0x10000>, <0 0x17520000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; - qcom,drv-count = <3>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, @@ -3326,6 +4948,7 @@ <WAKE_TCS 2>, <CONTROL_TCS 0>; label = "apps_rsc"; + power-domains = <&SYSTEM_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -3514,6 +5137,144 @@ "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,x1e80100-adsp-pas"; + reg = <0 0x30000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&adspslpi_mem>, + <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,x1e80100-cdsp-pas"; + reg = <0 0x32300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&cdsp_mem>, + <&q6_cdsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; }; timer { diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index 95b0a1f6de..a8a44fe5e8 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -529,6 +529,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -541,7 +542,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -554,7 +557,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -568,6 +573,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -581,6 +587,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a774b1.dtsi b/dts/src/arm64/renesas/r8a774b1.dtsi index 786660fcde..4fff511e99 100644 --- a/dts/src/arm64/renesas/r8a774b1.dtsi +++ b/dts/src/arm64/renesas/r8a774b1.dtsi @@ -413,6 +413,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; @@ -425,7 +426,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; @@ -438,7 +441,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; @@ -452,6 +457,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; @@ -465,6 +471,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index eed94ffed7..1ef43d78c3 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -384,6 +384,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -396,7 +397,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -409,7 +412,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -423,6 +428,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -436,6 +442,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a774e1.dtsi b/dts/src/arm64/renesas/r8a774e1.dtsi index 175e5d296d..be55ae8394 100644 --- a/dts/src/arm64/renesas/r8a774e1.dtsi +++ b/dts/src/arm64/renesas/r8a774e1.dtsi @@ -593,6 +593,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; @@ -605,7 +606,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; @@ -618,7 +621,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; @@ -632,6 +637,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; @@ -645,6 +651,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77951.dtsi b/dts/src/arm64/renesas/r8a77951.dtsi index a4260d9291..bea4edd17d 100644 --- a/dts/src/arm64/renesas/r8a77951.dtsi +++ b/dts/src/arm64/renesas/r8a77951.dtsi @@ -614,6 +614,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -626,7 +627,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -639,7 +642,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -653,6 +658,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -666,6 +672,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77960.dtsi b/dts/src/arm64/renesas/r8a77960.dtsi index a631ead171..7846fea8e4 100644 --- a/dts/src/arm64/renesas/r8a77960.dtsi +++ b/dts/src/arm64/renesas/r8a77960.dtsi @@ -578,6 +578,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -590,7 +591,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -603,7 +606,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -617,6 +622,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -630,6 +636,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77961.dtsi b/dts/src/arm64/renesas/r8a77961.dtsi index 7254912a24..58f9286a5a 100644 --- a/dts/src/arm64/renesas/r8a77961.dtsi +++ b/dts/src/arm64/renesas/r8a77961.dtsi @@ -578,6 +578,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; @@ -590,7 +591,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; @@ -603,7 +606,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; @@ -617,6 +622,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; @@ -630,6 +636,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index e57b902706..692940662d 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -449,6 +449,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -461,7 +462,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -474,7 +477,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -488,6 +493,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -501,6 +507,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77970.dtsi b/dts/src/arm64/renesas/r8a77970.dtsi index ed6e2e47c6..d2d3cecc76 100644 --- a/dts/src/arm64/renesas/r8a77970.dtsi +++ b/dts/src/arm64/renesas/r8a77970.dtsi @@ -328,6 +328,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; @@ -340,7 +341,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; @@ -353,7 +356,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; @@ -367,6 +372,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; @@ -380,6 +386,7 @@ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi index 5ed2daaca1..c0ba110c74 100644 --- a/dts/src/arm64/renesas/r8a77980.dtsi +++ b/dts/src/arm64/renesas/r8a77980.dtsi @@ -357,6 +357,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; @@ -369,7 +370,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; @@ -382,7 +385,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; @@ -395,7 +400,9 @@ reg = <0 0xe6fe0000 0 0x30>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; @@ -408,7 +415,9 @@ reg = <0 0xffc00000 0 0x30>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index 8c2b283423..37063e3f4e 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -415,6 +415,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -427,7 +428,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -440,7 +443,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -454,6 +459,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -467,6 +473,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index 8cf6473c63..89990dd8eb 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -336,6 +336,7 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 125>; clock-names = "fck"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -348,7 +349,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -361,7 +364,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 123>; clock-names = "fck"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -375,6 +380,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 122>; clock-names = "fck"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -388,6 +394,7 @@ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 121>; clock-names = "fck"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a779a0.dtsi b/dts/src/arm64/renesas/r8a779a0.dtsi index 4e67a03564..cfa70b441e 100644 --- a/dts/src/arm64/renesas/r8a779a0.dtsi +++ b/dts/src/arm64/renesas/r8a779a0.dtsi @@ -370,6 +370,7 @@ interrupts = <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 713>; clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -382,7 +383,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 714>; clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -395,7 +398,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 715>; clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -408,7 +413,9 @@ reg = <0 0xe6fe0000 0 0x30>; interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 716>; clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -421,7 +428,9 @@ reg = <0 0xffc00000 0 0x30>; interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 717>; clock-names = "fck"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -658,7 +667,7 @@ avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779a0", "renesas,etheravb-rcar-gen4"; - reg = <0 0xe6800000 0 0x800>; + reg = <0 0xe6800000 0 0x1000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, @@ -706,7 +715,7 @@ avb1: ethernet@e6810000 { compatible = "renesas,etheravb-r8a779a0", "renesas,etheravb-rcar-gen4"; - reg = <0 0xe6810000 0 0x800>; + reg = <0 0xe6810000 0 0x1000>; interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, diff --git a/dts/src/arm64/renesas/r8a779f0.dtsi b/dts/src/arm64/renesas/r8a779f0.dtsi index 7fb4989cce..72cf30341f 100644 --- a/dts/src/arm64/renesas/r8a779f0.dtsi +++ b/dts/src/arm64/renesas/r8a779f0.dtsi @@ -501,6 +501,7 @@ interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 713>; clock-names = "fck"; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; @@ -513,7 +514,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 714>; clock-names = "fck"; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; @@ -526,7 +529,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 484 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 715>; clock-names = "fck"; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; @@ -539,7 +544,9 @@ reg = <0 0xe6fe0000 0 0x30>; interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 716>; clock-names = "fck"; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; @@ -552,7 +559,9 @@ reg = <0 0xffc00000 0 0x30>; interrupts = <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 717>; clock-names = "fck"; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dts b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dts new file mode 100644 index 0000000000..c8b1bb50a8 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the standalone R-Car V4H White Hawk CPU board + * + * Copyright (C) 2023 Glider bv + */ + +/dts-v1/; +#include "r8a779g0-white-hawk-cpu.dtsi" + +/ { + model = "Renesas White Hawk CPU board based on r8a779g0"; +}; diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi index 913f70fe6c..b1fe1aedc2 100644 --- a/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -1,378 +1,14 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the White Hawk CPU board + * Device Tree Source for the R-Car V4H White Hawk CPU board * * Copyright (C) 2022 Renesas Electronics Corp. */ #include "r8a779g0.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> +#include "white-hawk-cpu-common.dtsi" / { model = "Renesas White Hawk CPU board"; compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; - - aliases { - ethernet0 = &avb0; - serial0 = &hscif0; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:921600n8"; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW47"; - wakeup-source; - debounce-interval = <20>; - }; - - key-2 { - gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW48"; - wakeup-source; - debounce-interval = <20>; - }; - - key-3 { - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW49"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-1 { - gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; - - led-2 { - gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led-3 { - gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - memory@480000000 { - device_type = "memory"; - reg = <0x4 0x80000000 0x0 0x80000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x1 0x00000000>; - }; - - mini-dp-con { - compatible = "dp-connector"; - label = "CN5"; - type = "mini"; - - port { - mini_dp_con_in: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - - reg_1p2v: regulator-1p2v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sn65dsi86_refclk: clk-x6 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - }; -}; - -&avb0 { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - tx-internal-delay-ps = <2000>; - status = "okay"; - - phy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0022.1622", - "ethernet-phy-ieee802.3-c22"; - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio7>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; - }; -}; - -&dsi0 { - status = "okay"; - - ports { - port@1 { - dsi0_out: endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <1 2 3 4>; - }; - }; - }; -}; - -&du { - status = "okay"; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&hscif0 { - pinctrl-0 = <&hscif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - io_expander_a: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - eeprom@50 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "cpu-board"; - reg = <0x50>; - pagesize = <8>; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - bridge@2c { - compatible = "ti,sn65dsi86"; - reg = <0x2c>; - - clocks = <&sn65dsi86_refclk>; - clock-names = "refclk"; - - interrupt-parent = <&intc_ex>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - - vccio-supply = <®_1p8v>; - vpll-supply = <®_1p8v>; - vcca-supply = <®_1p2v>; - vcc-supply = <®_1p2v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - sn65dsi86_out: endpoint { - remote-endpoint = <&mini_dp_con_in>; - }; - }; - }; - }; -}; - -&mmc0 { - pinctrl-0 = <&mmc_pins>; - pinctrl-1 = <&mmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - full-pwr-cycle-in-suspend; - status = "okay"; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - avb0_pins: avb0 { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_rgmii", - "avb0_txcrefclk"; - function = "avb0"; - }; - - pins_mdio { - groups = "avb0_mdio"; - drive-strength = <21>; - }; - - pins_mii { - groups = "avb0_rgmii"; - drive-strength = <21>; - }; - - }; - hscif0_pins: hscif0 { - groups = "hscif0_data"; - function = "hscif0"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - keys_pins: keys { - pins = "GP_5_0", "GP_5_1", "GP_5_2"; - bias-pull-up; - }; - - mmc_pins: mmc { - groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; - function = "mmc"; - power-source = <1800>; - }; - - qspi0_pins: qspi0 { - groups = "qspi0_ctrl", "qspi0_data4"; - function = "qspi0"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk"; - function = "scif_clk"; - }; -}; - -&rpc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - compatible = "spansion,s25fs512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - reg = <0x0 0x1200000>; - read-only; - }; - user@1200000 { - reg = <0x1200000 0x2e00000>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif_clk { - clock-frequency = <24000000>; }; diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk.dts b/dts/src/arm64/renesas/r8a779g0-white-hawk.dts index eff1ef6e2c..784d4e8b20 100644 --- a/dts/src/arm64/renesas/r8a779g0-white-hawk.dts +++ b/dts/src/arm64/renesas/r8a779g0-white-hawk.dts @@ -1,69 +1,15 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the White Hawk CPU and BreakOut boards + * Device Tree Source for the R-Car V4H White Hawk CPU and BreakOut boards * * Copyright (C) 2022 Renesas Electronics Corp. */ /dts-v1/; #include "r8a779g0-white-hawk-cpu.dtsi" -#include "r8a779g0-white-hawk-csi-dsi.dtsi" -#include "r8a779g0-white-hawk-ethernet.dtsi" +#include "white-hawk-common.dtsi" / { model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0"; - - can_transceiver0: can-phy0 { - compatible = "nxp,tjr1443"; - #phy-cells = <0>; - enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - max-bitrate = <5000000>; - }; -}; - -&can_clk { - clock-frequency = <40000000>; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; - pinctrl-names = "default"; - - status = "okay"; - - channel0 { - status = "okay"; - phys = <&can_transceiver0>; - }; - - channel1 { - status = "okay"; - }; -}; - -&i2c0 { - eeprom@51 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "breakout-board"; - reg = <0x51>; - pagesize = <8>; - }; -}; - -&pfc { - can_clk_pins: can-clk { - groups = "can_clk"; - function = "can_clk"; - }; - - canfd0_pins: canfd0 { - groups = "canfd0_data"; - function = "canfd0"; - }; - - canfd1_pins: canfd1 { - groups = "canfd1_data"; - function = "canfd1"; - }; }; diff --git a/dts/src/arm64/renesas/r8a779g0.dtsi b/dts/src/arm64/renesas/r8a779g0.dtsi index d3d25e077c..9bc542bc61 100644 --- a/dts/src/arm64/renesas/r8a779g0.dtsi +++ b/dts/src/arm64/renesas/r8a779g0.dtsi @@ -161,11 +161,6 @@ }; }; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; - }; - extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; @@ -185,13 +180,24 @@ interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; - /* External SCIF clock - to be overridden by boards that provide it */ + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clocks - to be overridden by boards that provide them */ scif_clk: scif { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; + scif_clk2: scif2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -479,6 +485,7 @@ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; clocks = <&cpg CPG_MOD 713>; clock-names = "fck"; power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; @@ -491,7 +498,9 @@ reg = <0 0xe6fc0000 0 0x30>; interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 714>; clock-names = "fck"; power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; @@ -504,7 +513,9 @@ reg = <0 0xe6fd0000 0 0x30>; interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 715>; clock-names = "fck"; power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; @@ -517,7 +528,9 @@ reg = <0 0xe6fe0000 0 0x30>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 716>; clock-names = "fck"; power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; @@ -530,7 +543,9 @@ reg = <0 0xffc00000 0 0x30>; interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&cpg CPG_MOD 717>; clock-names = "fck"; power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; @@ -681,7 +696,7 @@ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>, <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, - <&scif_clk>; + <&scif_clk2>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x35>, <&dmac0 0x34>, <&dmac1 0x35>, <&dmac1 0x34>; @@ -761,7 +776,7 @@ avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779g0", "renesas,etheravb-rcar-gen4"; - reg = <0 0xe6800000 0 0x800>; + reg = <0 0xe6800000 0 0x1000>; interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, @@ -808,7 +823,7 @@ avb1: ethernet@e6810000 { compatible = "renesas,etheravb-r8a779g0", "renesas,etheravb-rcar-gen4"; - reg = <0 0xe6810000 0 0x800>; + reg = <0 0xe6810000 0 0x1000>; interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, @@ -1057,7 +1072,7 @@ interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 705>, <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, - <&scif_clk>; + <&scif_clk2>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>, <&dmac1 0x59>, <&dmac1 0x58>; @@ -1777,6 +1792,37 @@ }; }; + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a779g0", + "renesas,rcar-gen4-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 706>, + <&cpg CPG_CORE R8A779G0_CLK_SD0H>; + clock-names = "core", "clkh"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 706>; + max-frequency = <200000000>; + iommus = <&ipmmu_ds0 32>; + status = "disabled"; + }; + + rpc: spi@ee200000 { + compatible = "renesas,r8a779g0-rpc-if", + "renesas,rcar-gen4-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 629>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + ipmmu_rt0: iommu@ee480000 { compatible = "renesas,ipmmu-r8a779g0", "renesas,rcar-gen4-ipmmu-vmsa"; @@ -1886,37 +1932,6 @@ #iommu-cells = <1>; }; - mmc0: mmc@ee140000 { - compatible = "renesas,sdhi-r8a779g0", - "renesas,rcar-gen4-sdhi"; - reg = <0 0xee140000 0 0x2000>; - interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 706>, - <&cpg CPG_CORE R8A779G0_CLK_SD0H>; - clock-names = "core", "clkh"; - power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; - resets = <&cpg 706>; - max-frequency = <200000000>; - iommus = <&ipmmu_ds0 32>; - status = "disabled"; - }; - - rpc: spi@ee200000 { - compatible = "renesas,r8a779g0-rpc-if", - "renesas,rcar-gen4-rpc-if"; - reg = <0 0xee200000 0 0x200>, - <0 0x08000000 0 0x04000000>, - <0 0xee208000 0 0x100>; - reg-names = "regs", "dirmap", "wbuf"; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 629>; - power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; - resets = <&cpg 629>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/dts/src/arm64/renesas/r8a779g2-white-hawk-single.dts b/dts/src/arm64/renesas/r8a779g2-white-hawk-single.dts new file mode 100644 index 0000000000..2f79e5a612 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779g2-white-hawk-single.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H ES2.0 White Hawk Single board + * + * Copyright (C) 2023 Glider bv + */ + +/dts-v1/; +#include "r8a779g2.dtsi" +#include "white-hawk-cpu-common.dtsi" +#include "white-hawk-common.dtsi" + +/ { + model = "Renesas White Hawk Single board based on r8a779g2"; + compatible = "renesas,white-hawk-single", "renesas,r8a779g2", + "renesas,r8a779g0"; +}; + +&hscif0 { + uart-has-rtscts; +}; + +&hscif0_pins { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; +}; diff --git a/dts/src/arm64/renesas/r8a779g2.dtsi b/dts/src/arm64/renesas/r8a779g2.dtsi new file mode 100644 index 0000000000..e08f531843 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779g2.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H (R8A779G2) SoC + * + * Copyright (C) 2023 Glider bv + */ + +#include "r8a779g0.dtsi" + +/ { + compatible = "renesas,r8a779g2", "renesas,r8a779g0"; +}; diff --git a/dts/src/arm64/renesas/r8a779h0-gray-hawk-single.dts b/dts/src/arm64/renesas/r8a779h0-gray-hawk-single.dts new file mode 100644 index 0000000000..bc8616a56c --- /dev/null +++ b/dts/src/arm64/renesas/r8a779h0-gray-hawk-single.dts @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4M Gray Hawk Single board + * + * Copyright (C) 2023 Renesas Electronics Corp. + * Copyright (C) 2024 Glider bv + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "r8a779h0.dtsi" + +/ { + model = "Renesas Gray Hawk Single board based on r8a779h0"; + compatible = "renesas,gray-hawk-single", "renesas,r8a779h0"; + + aliases { + serial0 = &hscif0; + ethernet0 = &avb0; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:921600n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x1 0x80000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio7>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; + + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; + }; + + eeprom@52 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "csi-dsi-sub-board-id"; + reg = <0x52>; + pagesize = <8>; + }; + + eeprom@53 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "ethernet-sub-board-id"; + reg = <0x53>; + pagesize = <8>; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif_clk_pins: scif-clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x0 0x1200000>; + read-only; + }; + user@1200000 { + reg = <0x1200000 0x2e00000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/dts/src/arm64/renesas/r8a779h0.dtsi b/dts/src/arm64/renesas/r8a779h0.dtsi new file mode 100644 index 0000000000..1188572918 --- /dev/null +++ b/dts/src/arm64/renesas/r8a779h0.dtsi @@ -0,0 +1,664 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4M (R8A779H0) SoC + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/renesas,r8a779h0-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/renesas,r8a779h0-sysc.h> + +/ { + compatible = "renesas,r8a779h0"; + #address-cells = <2>; + #size-cells = <2>; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <825000>; + clock-latency-ns = <500000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <825000>; + clock-latency-ns = <500000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a76_0>; + }; + core1 { + cpu = <&a76_1>; + }; + core2 { + cpu = <&a76_2>; + }; + core3 { + cpu = <&a76_3>; + }; + }; + }; + + a76_0: cpu@0 { + compatible = "arm,cortex-a76"; + reg = <0>; + device_type = "cpu"; + power-domains = <&sysc R8A779H0_PD_A1E0D0C0>; + next-level-cache = <&L3_CA76>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC0>; + operating-points-v2 = <&cluster0_opp>; + }; + + a76_1: cpu@100 { + compatible = "arm,cortex-a76"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A779H0_PD_A1E0D0C1>; + next-level-cache = <&L3_CA76>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC1>; + operating-points-v2 = <&cluster0_opp>; + }; + + a76_2: cpu@200 { + compatible = "arm,cortex-a76"; + reg = <0x200>; + device_type = "cpu"; + power-domains = <&sysc R8A779H0_PD_A1E0D0C2>; + next-level-cache = <&L3_CA76>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC2>; + operating-points-v2 = <&cluster0_opp>; + }; + + a76_3: cpu@300 { + compatible = "arm,cortex-a76"; + reg = <0x300>; + device_type = "cpu"; + power-domains = <&sysc R8A779H0_PD_A1E0D0C3>; + next-level-cache = <&L3_CA76>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC3>; + operating-points-v2 = <&cluster0_opp>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + }; + + L3_CA76: cache-controller { + compatible = "cache"; + power-domains = <&sysc R8A779H0_PD_A2E0D0>; + cache-unified; + cache-level = <3>; + }; + }; + + extal_clk: extal-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a779h0-wdt", + "renesas,rcar-gen4-wdt"; + reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + status = "disabled"; + }; + + pfc: pinctrl@e6050000 { + compatible = "renesas,pfc-r8a779h0"; + reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, + <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>, + <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>, + <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>; + }; + + gpio0: gpio@e6050180 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050180 0 0x54>; + interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 19>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + }; + + gpio1: gpio@e6050980 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050980 0 0x54>; + interrupts = <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + }; + + gpio2: gpio@e6058180 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6058180 0 0x54>; + interrupts = <GIC_SPI 627 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 20>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + }; + + gpio3: gpio@e6058980 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6058980 0 0x54>; + interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + }; + + gpio4: gpio@e6060180 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6060180 0 0x54>; + interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 25>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + }; + + gpio5: gpio@e6060980 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6060980 0 0x54>; + interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 21>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + }; + + gpio6: gpio@e6061180 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6061180 0 0x54>; + interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 21>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + }; + + gpio7: gpio@e6061980 { + compatible = "renesas,gpio-r8a779h0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6061980 0 0x54>; + interrupts = <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 21>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a779h0-cpg-mssr"; + reg = <0 0xe6150000 0 0x4000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a779h0-rst"; + reg = <0 0xe6160000 0 0x4000>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a779h0-sysc"; + reg = <0 0xe6180000 0 0x4000>; + #power-domain-cells = <1>; + }; + + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a779h0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a779h0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a779h0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a779h0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 521>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 521>; + dmas = <&dmac1 0x97>, <&dmac1 0x96>, + <&dmac2 0x97>, <&dmac2 0x96>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a779h0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>, + <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 514>; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + status = "disabled"; + }; + + avb0: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a779h0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6800000 0 0x1000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 211>; + clock-names = "fck"; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 211>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb1: ethernet@e6810000 { + compatible = "renesas,etheravb-r8a779h0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6810000 0 0x1000>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 212>; + clock-names = "fck"; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 212>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb2: ethernet@e6820000 { + compatible = "renesas,etheravb-r8a779h0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6820000 0 0x1000>; + interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 213>; + clock-names = "fck"; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 213>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dmac1: dma-controller@e7350000 { + compatible = "renesas,dmac-r8a779h0", + "renesas,rcar-gen4-dmac"; + reg = <0 0xe7350000 0 0x1000>, + <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15"; + clocks = <&cpg CPG_MOD 709>; + clock-names = "fck"; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 709>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7351000 { + compatible = "renesas,dmac-r8a779h0", + "renesas,rcar-gen4-dmac"; + reg = <0 0xe7351000 0 0x1000>, + <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 710>; + clock-names = "fck"; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 710>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a779h0", + "renesas,rcar-gen4-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 706>, + <&cpg CPG_CORE R8A779H0_CLK_SD0H>; + clock-names = "core", "clkh"; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 706>; + max-frequency = <200000000>; + status = "disabled"; + }; + + rpc: spi@ee200000 { + compatible = "renesas,r8a779h0-rpc-if", + "renesas,rcar-gen4-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 629>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gic: interrupt-controller@f1000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1000000 0 0x20000>, + <0x0 0xf1060000 0 0x110000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/dts/src/arm64/renesas/r9a07g043u.dtsi b/dts/src/arm64/renesas/r9a07g043u.dtsi index 2ab231572d..964b0a475e 100644 --- a/dts/src/arm64/renesas/r9a07g043u.dtsi +++ b/dts/src/arm64/renesas/r9a07g043u.dtsi @@ -61,6 +61,75 @@ &soc { interrupt-parent = <&gic>; + cru: video@10830000 { + compatible = "renesas,r9a07g043-cru", "renesas,rzg2l-cru"; + reg = <0 0x10830000 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G043_CRU_VCLK>, + <&cpg CPG_MOD R9A07G043_CRU_PCLK>, + <&cpg CPG_MOD R9A07G043_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + interrupts = <SOC_PERIPHERAL_IRQ(167) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(168) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(169) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + resets = <&cpg R9A07G043_CRU_PRESETN>, + <&cpg R9A07G043_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@10830400 { + compatible = "renesas,r9a07g043-csi2", "renesas,rzg2l-csi2"; + reg = <0 0x10830400 0 0xfc00>; + interrupts = <SOC_PERIPHERAL_IRQ(166) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G043_CRU_VCLK>, + <&cpg CPG_MOD R9A07G043_CRU_PCLK>; + clock-names = "system", "video", "apb"; + resets = <&cpg R9A07G043_CRU_PRESETN>, + <&cpg R9A07G043_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + irqc: interrupt-controller@110a0000 { compatible = "renesas,r9a07g043u-irqc", "renesas,rzg2l-irqc"; @@ -109,7 +178,13 @@ <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>, - <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>; + <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_EDGE_RISING>; interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", "irq4", "irq5", "irq6", "irq7", @@ -121,7 +196,9 @@ "tint20", "tint21", "tint22", "tint23", "tint24", "tint25", "tint26", "tint27", "tint28", "tint29", "tint30", "tint31", - "bus-err"; + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>, <&cpg CPG_MOD R9A07G043_IA55_PCLK>; clock-names = "clk", "pclk"; diff --git a/dts/src/arm64/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso b/dts/src/arm64/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso new file mode 100644 index 0000000000..b41bb4b31a --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G2UL SMARC EVK with OV5645 camera + * connected to CSI and CRU enabled. + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +#define OV5645_PARENT_I2C i2c0 +#include "rz-smarc-cru-csi-ov5645.dtsi" + +&ov5645 { + enable-gpios = <&pinctrl RZG2L_GPIO(4, 4) GPIO_ACTIVE_HIGH>; + reset-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm64/renesas/r9a07g044.dtsi b/dts/src/arm64/renesas/r9a07g044.dtsi index 66f68fc2b2..9f00b75d2b 100644 --- a/dts/src/arm64/renesas/r9a07g044.dtsi +++ b/dts/src/arm64/renesas/r9a07g044.dtsi @@ -793,6 +793,22 @@ reset-names = "rst", "arst", "prst"; power-domains = <&cpg>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; }; vspd: vsp@10870000 { @@ -820,6 +836,36 @@ resets = <&cpg R9A07G044_LCDC_RESET_N>; }; + du: display@10890000 { + compatible = "renesas,r9a07g044-du"; + reg = <0 0x10890000 0 0x10000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + renesas,vsps = <&vspd 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_dsi: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -905,7 +951,27 @@ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, <&cpg CPG_MOD R9A07G044_IA55_PCLK>; clock-names = "clk", "pclk"; diff --git a/dts/src/arm64/renesas/r9a07g054.dtsi b/dts/src/arm64/renesas/r9a07g054.dtsi index 1f1d481dc7..53d8905f36 100644 --- a/dts/src/arm64/renesas/r9a07g054.dtsi +++ b/dts/src/arm64/renesas/r9a07g054.dtsi @@ -798,6 +798,22 @@ reset-names = "rst", "arst", "prst"; power-domains = <&cpg>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; }; vspd: vsp@10870000 { @@ -826,6 +842,37 @@ resets = <&cpg R9A07G054_LCDC_RESET_N>; }; + du: display@10890000 { + compatible = "renesas,r9a07g054-du", + "renesas,r9a07g044-du"; + reg = <0 0x10890000 0 0x10000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_LCDC_RESET_N>; + renesas,vsps = <&vspd 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_dsi: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g054-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -912,7 +959,27 @@ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>, <&cpg CPG_MOD R9A07G054_IA55_PCLK>; clock-names = "clk", "pclk"; diff --git a/dts/src/arm64/renesas/r9a08g045.dtsi b/dts/src/arm64/renesas/r9a08g045.dtsi index 5facfad961..f5f3f4f4c8 100644 --- a/dts/src/arm64/renesas/r9a08g045.dtsi +++ b/dts/src/arm64/renesas/r9a08g045.dtsi @@ -42,6 +42,11 @@ clock-frequency = <0>; }; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -152,7 +157,10 @@ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", "irq4", "irq5", "irq6", "irq7", @@ -164,7 +172,8 @@ "tint20", "tint21", "tint22", "tint23", "tint24", "tint25", "tint26", "tint27", "tint28", "tint29", "tint30", "tint31", - "bus-err"; + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0"; clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>, <&cpg CPG_MOD R9A08G045_IA55_PCLK>; clock-names = "clk", "pclk"; @@ -264,6 +273,20 @@ <0x0 0x12440000 0 0x60000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; + + wdt0: watchdog@12800800 { + compatible = "renesas,r9a08g045-wdt", "renesas,rzg2l-wdt"; + reg = <0 0x12800800 0 0x400>; + clocks = <&cpg CPG_MOD R9A08G045_WDT0_PCLK>, + <&cpg CPG_MOD R9A08G045_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A08G045_WDT0_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; }; timer { diff --git a/dts/src/arm64/renesas/rzg2l-smarc.dtsi b/dts/src/arm64/renesas/rzg2l-smarc.dtsi index 37807f1bda..887dffe149 100644 --- a/dts/src/arm64/renesas/rzg2l-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg2l-smarc.dtsi @@ -40,17 +40,7 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - }; - }; - port@1 { - reg = <1>; dsi0_out: endpoint { data-lanes = <1 2 3 4>; remote-endpoint = <&adv7535_in>; @@ -59,6 +49,10 @@ }; }; +&du { + status = "okay"; +}; + &i2c1 { adv7535: hdmi@3d { compatible = "adi,adv7535"; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi index 859bc8745e..f21508640b 100644 --- a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi @@ -56,17 +56,7 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - }; - }; - port@1 { - reg = <1>; dsi0_out: endpoint { data-lanes = <1 2 3 4>; remote-endpoint = <&adv7535_in>; @@ -75,6 +65,10 @@ }; }; +&du { + status = "okay"; +}; + &i2c1 { adv7535: hdmi@3d { compatible = "adi,adv7535"; diff --git a/dts/src/arm64/renesas/rzg3s-smarc-som.dtsi b/dts/src/arm64/renesas/rzg3s-smarc-som.dtsi index f062d4ad78..acac4666ae 100644 --- a/dts/src/arm64/renesas/rzg3s-smarc-som.dtsi +++ b/dts/src/arm64/renesas/rzg3s-smarc-som.dtsi @@ -193,12 +193,14 @@ #endif &pinctrl { +#if SW_CONFIG3 == SW_ON eth0-phy-irq-hog { gpio-hog; gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>; input; line-name = "eth0-phy-irq"; }; +#endif eth0_pins: eth0 { txc { @@ -234,12 +236,14 @@ }; }; +#if SW_CONFIG3 == SW_ON eth1-phy-irq-hog { gpio-hog; gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>; input; line-name = "eth1-phy-irq"; }; +#endif eth1_pins: eth1 { txc { @@ -336,3 +340,8 @@ }; }; }; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/rzg3s-smarc.dtsi b/dts/src/arm64/renesas/rzg3s-smarc.dtsi index 2145201372..deb2ad37bb 100644 --- a/dts/src/arm64/renesas/rzg3s-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg3s-smarc.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> / { @@ -14,6 +15,37 @@ mmc1 = &sdhi1; }; + keys { + compatible = "gpio-keys"; + + key-1 { + interrupts = <RZG2L_GPIO(18, 0) IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&pinctrl>; + linux,code = <KEY_1>; + label = "USER_SW1"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + interrupts = <RZG2L_GPIO(0, 1) IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&pinctrl>; + linux,code = <KEY_2>; + label = "USER_SW2"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + interrupts = <RZG2L_GPIO(0, 3) IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&pinctrl>; + linux,code = <KEY_3>; + label = "USER_SW3"; + wakeup-source; + debounce-interval = <20>; + }; + }; + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -35,6 +67,27 @@ }; &pinctrl { + key-1-gpio-hog { + gpio-hog; + gpios = <RZG2L_GPIO(18, 0) GPIO_ACTIVE_LOW>; + input; + line-name = "key-1-gpio-irq"; + }; + + key-2-gpio-hog { + gpio-hog; + gpios = <RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>; + input; + line-name = "key-2-gpio-irq"; + }; + + key-3-gpio-hog { + gpio-hog; + gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_LOW>; + input; + line-name = "key-3-gpio-irq"; + }; + scif0_pins: scif0 { pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */ <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */ diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index 50de17e4fb..431b37bf56 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -32,39 +32,40 @@ }; }; - accel_3v3: regulator-acc-3v3 { + reg_t1p8v: regulator-t1p8v { compatible = "regulator-fixed"; - regulator-name = "accel-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - hdmi_1v8: regulator-hdmi-1v8 { - compatible = "regulator-fixed"; - regulator-name = "hdmi-1v8"; + regulator-name = "T1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - hdmi_3v3: regulator-hdmi-3v3 { + pcie_1v5: regulator-pcie-1v5 { compatible = "regulator-fixed"; - regulator-name = "hdmi-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "pcie-1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio_exp_77 15 GPIO_ACTIVE_HIGH>; + enable-active-high; }; - snd_3p3v: regulator-snd_3p3v { + pcie_3v3: regulator-pcie-3v3 { compatible = "regulator-fixed"; - regulator-name = "snd-3.3v"; + regulator-name = "pcie-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio_exp_77 14 GPIO_ACTIVE_HIGH>; + enable-active-high; }; - snd_vcc5v: regulator-snd_vcc5v { + reg_5v: regulator-5v { compatible = "regulator-fixed"; - regulator-name = "snd-vcc5v"; + regulator-name = "fixed-5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; }; wlan_en: regulator-wlan_en { @@ -157,11 +158,11 @@ pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>; - avdd-supply = <&hdmi_1v8>; - dvdd-supply = <&hdmi_1v8>; - pvdd-supply = <&hdmi_1v8>; - dvdd-3v-supply = <&hdmi_3v3>; - bgvdd-supply = <&hdmi_1v8>; + avdd-supply = <®_t1p8v>; + dvdd-supply = <®_t1p8v>; + pvdd-supply = <®_t1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_t1p8v>; adi,input-depth = <8>; adi,input-colorspace = "rgb"; @@ -198,8 +199,8 @@ compatible = "st,lsm9ds0-imu"; reg = <0x1d>; - vdd-supply = <&accel_3v3>; - vddio-supply = <&accel_3v3>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; pcm3168a: audio-codec@44 { @@ -209,20 +210,20 @@ clocks = <&clksndsel>; clock-names = "scki"; - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; + VDD1-supply = <®_3p3v>; + VDD2-supply = <®_3p3v>; + VCCAD1-supply = <®_5v>; + VCCAD2-supply = <®_5v>; + VCCDA1-supply = <®_5v>; + VCCDA2-supply = <®_5v>; }; gyroscope@6b { compatible = "st,lsm9ds0-gyro"; reg = <0x6b>; - vdd-supply = <&accel_3v3>; - vddio-supply = <&accel_3v3>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; }; @@ -348,6 +349,9 @@ &pciec1 { status = "okay"; + + vpcie1v5-supply = <&pcie_1v5>; + vpcie3v3-supply = <&pcie_3v3>; }; &pfc { @@ -417,6 +421,13 @@ pinctrl-names = "default"; status = "okay"; + + gnss { + compatible = "u-blox,neo-m8"; + reset-gpios = <&gpio_exp_75 6 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3p3v>; + current-speed = <9600>; + }; }; &sdhi3 { diff --git a/dts/src/arm64/renesas/white-hawk-common.dtsi b/dts/src/arm64/renesas/white-hawk-common.dtsi new file mode 100644 index 0000000000..c99086edad --- /dev/null +++ b/dts/src/arm64/renesas/white-hawk-common.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the common parts shared by the White Hawk BreakOut + * and White Hawk Single boards + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include "white-hawk-csi-dsi.dtsi" +#include "white-hawk-ethernet.dtsi" + +/ { + can_transceiver0: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <5000000>; + }; +}; + +&can_clk { + clock-frequency = <40000000>; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + channel0 { + status = "okay"; + phys = <&can_transceiver0>; + }; + + channel1 { + status = "okay"; + }; +}; + +&i2c0 { + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; + }; +}; + +&pfc { + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; +}; diff --git a/dts/src/arm64/renesas/white-hawk-cpu-common.dtsi b/dts/src/arm64/renesas/white-hawk-cpu-common.dtsi new file mode 100644 index 0000000000..8ac17370ff --- /dev/null +++ b/dts/src/arm64/renesas/white-hawk-cpu-common.dtsi @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the common parts shared by the White Hawk CPU and + * White Hawk Single boards + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + ethernet0 = &avb0; + serial0 = &hscif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:921600n8"; + }; + + sn65dsi86_refclk: clk-x6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; + + mini-dp-con { + compatible = "dp-connector"; + label = "CN5"; + type = "mini"; + + port { + mini_dp_con_in: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio7>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + }; +}; + +&dsi0 { + status = "okay"; + + ports { + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&du { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander_a: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + + vccio-supply = <®_1p8v>; + vpll-supply = <®_1p8v>; + vcca-supply = <®_1p2v>; + vcc-supply = <®_1p2v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&mini_dp_con_in>; + }; + }; + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data"; + function = "hscif0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x0 0x1200000>; + read-only; + }; + user@1200000 { + reg = <0x1200000 0x2e00000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/dts/src/arm64/renesas/white-hawk-csi-dsi.dtsi index f8537f7ea4..3006b0a64f 100644 --- a/dts/src/arm64/renesas/r8a779g0-white-hawk-csi-dsi.dtsi +++ b/dts/src/arm64/renesas/white-hawk-csi-dsi.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board + * Device Tree Source for the White Hawk CSI/DSI sub-board * * Copyright (C) 2022 Glider bv */ diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk-ethernet.dtsi b/dts/src/arm64/renesas/white-hawk-ethernet.dtsi index 4f411f95c6..a218fda337 100644 --- a/dts/src/arm64/renesas/r8a779g0-white-hawk-ethernet.dtsi +++ b/dts/src/arm64/renesas/white-hawk-ethernet.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1) + * Device Tree Source for the White Hawk RAVB/Ethernet(1000Base-T1) * sub-board * * Copyright (C) 2022 Glider bv diff --git a/dts/src/arm64/rockchip/px30-ringneck-haikou.dts b/dts/src/arm64/rockchip/px30-ringneck-haikou.dts index 16798eb770..ae398acdcf 100644 --- a/dts/src/arm64/rockchip/px30-ringneck-haikou.dts +++ b/dts/src/arm64/rockchip/px30-ringneck-haikou.dts @@ -227,6 +227,7 @@ &uart5 { pinctrl-0 = <&uart5_xfer>; + rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/px30-ringneck.dtsi b/dts/src/arm64/rockchip/px30-ringneck.dtsi index 1239775583..bb1aea82e6 100644 --- a/dts/src/arm64/rockchip/px30-ringneck.dtsi +++ b/dts/src/arm64/rockchip/px30-ringneck.dtsi @@ -347,6 +347,12 @@ }; }; +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3>; + pmuio2-supply = <&vcc_3v3>; + status = "okay"; +}; + &saradc { vref-supply = <&vcc_1v8>; status = "okay"; diff --git a/dts/src/arm64/rockchip/rk3328-rock-pi-e.dts b/dts/src/arm64/rockchip/rk3328-rock-pi-e.dts index 3cda6c627b..f09d60bbe6 100644 --- a/dts/src/arm64/rockchip/rk3328-rock-pi-e.dts +++ b/dts/src/arm64/rockchip/rk3328-rock-pi-e.dts @@ -148,7 +148,7 @@ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; clock_in_out = "input"; - phy-handle = <&rtl8211e>; + phy-handle = <&rtl8211>; phy-mode = "rgmii"; phy-supply = <&vcc_io>; pinctrl-names = "default"; @@ -165,7 +165,7 @@ #address-cells = <1>; #size-cells = <0>; - rtl8211e: ethernet-phy@1 { + rtl8211: ethernet-phy@1 { reg = <1>; pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi index 7b4c15c4a9..b6f045069e 100644 --- a/dts/src/arm64/rockchip/rk3328.dtsi +++ b/dts/src/arm64/rockchip/rk3328.dtsi @@ -744,11 +744,20 @@ status = "disabled"; ports { - hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + hdmi_in_vop: endpoint { remote-endpoint = <&vop_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts b/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts index 9e3aec4440..dfb2a0bdea 100644 --- a/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts +++ b/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts @@ -22,9 +22,6 @@ ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdhci; - spi1 = &spi1; - spi2 = &spi2; - spi5 = &spi5; }; avdd_0v9_s0: avdd-0v9-s0 { diff --git a/dts/src/arm64/rockchip/rk3399-orangepi.dts b/dts/src/arm64/rockchip/rk3399-orangepi.dts index e7551449e7..e26e2d8627 100644 --- a/dts/src/arm64/rockchip/rk3399-orangepi.dts +++ b/dts/src/arm64/rockchip/rk3399-orangepi.dts @@ -14,7 +14,7 @@ / { model = "Orange Pi RK3399 Board"; - compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399"; + compatible = "xunlong,rk3399-orangepi", "rockchip,rk3399"; aliases { ethernet0 = &gmac; diff --git a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts index 18a98c4648..2c3984a880 100644 --- a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts +++ b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts @@ -273,11 +273,12 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + pinctrl-0 = <&uart0_xfer>; status = "okay"; }; &uart2 { + rts-gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4a.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4a.dts index d5df8939a6..c68f45849c 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4a.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4a.dts @@ -19,6 +19,6 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; + spi-max-frequency = <108000000>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts index bee6d75883..6ea3180e57 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts @@ -37,7 +37,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; + spi-max-frequency = <108000000>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts index de2ebe4cb4..5274938bf1 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts @@ -49,7 +49,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; + spi-max-frequency = <108000000>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index 6e12c5a920..9d5f5b083e 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -38,6 +38,12 @@ serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; }; cpus { @@ -45,7 +51,7 @@ #size-cells = <0>; cpu-map { - cluster0 { + cluster0 { /* Cortex-A53 */ core0 { cpu = <&cpu_l0>; }; @@ -60,7 +66,7 @@ }; }; - cluster1 { + cluster1 { /* Cortex-A72 */ core0 { cpu = <&cpu_b0>; }; @@ -80,6 +86,13 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; }; cpu_l1: cpu@1 { @@ -92,6 +105,13 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; }; cpu_l2: cpu@2 { @@ -104,6 +124,13 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; }; cpu_l3: cpu@3 { @@ -116,6 +143,13 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; }; cpu_b0: cpu@100 { @@ -128,6 +162,13 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b>; thermal-idle { #cooling-cells = <2>; @@ -146,6 +187,13 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b>; thermal-idle { #cooling-cells = <2>; @@ -154,6 +202,24 @@ }; }; + l2_cache_l: l2-cache-cluster0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_cache_b: l2-cache-cluster1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + }; + idle-states { entry-method = "psci"; @@ -1956,6 +2022,7 @@ hdmi: hdmi@ff940000 { compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; + reg-io-width = <4>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, @@ -1964,13 +2031,16 @@ <&cru PLL_VPLL>; clock-names = "iahb", "isfr", "cec", "grf", "ref"; power-domains = <&power RK3399_PD_HDCP>; - reg-io-width = <4>; rockchip,grf = <&grf>; #sound-dai-cells = <0>; status = "disabled"; ports { - hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1983,6 +2053,10 @@ remote-endpoint = <&vopl_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc-d.dts b/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc-d.dts new file mode 100644 index 0000000000..ab83e8a616 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc-d.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg-arc.dtsi" + +/ { + model = "Anbernic RG ARC-D"; + compatible = "anbernic,rg-arc-d", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2m1_xfer>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt927"; + reg = <0x14>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-y; + touchscreen-size-x = <640>; + touchscreen-size-y = <480>; + }; +}; + +&pinctrl { + touchscreen { + touch_int: touch_int { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, + <&emmc_datastrobe>, <&emmc_rstnout>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc-s.dts b/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc-s.dts new file mode 100644 index 0000000000..6264a8c78d --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc-s.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg-arc.dtsi" + +/ { + model = "Anbernic RG ARC-S"; + compatible = "anbernic,rg-arc-s", "rockchip,rk3566"; + + aliases { + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc.dtsi b/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc.dtsi new file mode 100644 index 0000000000..a4a60e4a53 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg-arc.dtsi @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rgxx3.dtsi" + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3472000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_det>; + pinctrl-names = "default"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <128000000>; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + dsi0_in: port@0 { + reg = <0>; + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel: panel@0 { + compatible = "anbernic,rg-arc-panel", "sitronix,st7701"; + reg = <0>; + backlight = <&backlight>; + IOVCC-supply = <&vcc3v3_lcd0_n>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>; + rotation = <90>; + VCC-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +/* + * Device uses a non-standard six button layout for a gamepad with X, + * Y, and Z on the top row of buttons and A, B, and C under the bottom + * row. + */ +&gpio_keys_control { + button-a { + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; + label = "A"; + linux,code = <BTN_A>; + }; + + button-b { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "B"; + linux,code = <BTN_B>; + }; + + button-c { + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + label = "C"; + linux,code = <BTN_C>; + }; + + button-left { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-r1 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-right { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-x { + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + label = "X"; + linux,code = <BTN_X>; + }; + + button-y { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "Y"; + linux,code = <BTN_Y>; + }; + + button-z { + gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + label = "Z"; + linux,code = <BTN_Z>; + }; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-lcd { + lcd_rst: lcd-rst { + rockchip,pins = + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = + <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm4 { + status = "okay"; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi b/dts/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi index 2a2821f4c5..63a18ff36c 100644 --- a/dts/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi +++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi @@ -8,11 +8,73 @@ #include "rk3566-anbernic-rgxx3.dtsi" / { + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc_mux 0>, + <&adc_mux 1>, + <&adc_mux 2>, + <&adc_mux 3>; + pinctrl-0 = <&joy_mux_en>; + pinctrl-names = "default"; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_RX>; + }; + + axis@2 { + reg = <2>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_RY>; + }; + }; + + adc_mux: adc-mux { + compatible = "io-channel-mux"; + channels = "left_x", "right_x", "left_y", "right_y"; + #io-channel-cells = <1>; + io-channels = <&saradc 3>; + io-channel-names = "parent"; + mux-controls = <&gpio_mux>; + settle-time-us = <100>; + }; + backlight: backlight { compatible = "pwm-backlight"; power-supply = <&vcc_sys>; pwms = <&pwm4 0 25000 0>; }; + + gpio_mux: mux-controller { + compatible = "gpio-mux"; + mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, + <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + #mux-control-cells = <0>; + }; }; &cru { @@ -83,6 +145,18 @@ linux,code = <BTN_DPAD_RIGHT>; }; + button-thumbl { + gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + button-y { gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; label = "WEST"; diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts b/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts index c763c7f3b1..94e6dd61a2 100644 --- a/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts +++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts @@ -17,6 +17,61 @@ mmc2 = &sdmmc2; }; + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc_mux 0>, + <&adc_mux 1>, + <&adc_mux 2>, + <&adc_mux 3>; + pinctrl-0 = <&joy_mux_en>; + pinctrl-names = "default"; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_RX>; + }; + + axis@2 { + reg = <2>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_RY>; + }; + }; + + adc_mux: adc-mux { + compatible = "io-channel-mux"; + channels = "left_x", "right_x", "left_y", "right_y"; + #io-channel-cells = <1>; + io-channels = <&saradc 3>; + io-channel-names = "parent"; + mux-controls = <&gpio_mux>; + settle-time-us = <100>; + }; + battery: battery { compatible = "simple-battery"; charge-full-design-microamp-hours = <3472000>; @@ -36,6 +91,13 @@ <3400000 0>; }; + gpio_mux: mux-controller { + compatible = "gpio-mux"; + mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, + <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + #mux-control-cells = <0>; + }; + gpio_spi: spi { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -174,6 +236,18 @@ linux,code = <BTN_DPAD_RIGHT>; }; + button-thumbl { + gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + button-y { gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; label = "WEST"; diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi b/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi index 8cbf3d9a4f..18b8c2e7be 100644 --- a/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi +++ b/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -14,51 +14,6 @@ stdout-path = "serial2:1500000n8"; }; - adc-joystick { - compatible = "adc-joystick"; - io-channels = <&adc_mux 0>, - <&adc_mux 1>, - <&adc_mux 2>, - <&adc_mux 3>; - pinctrl-0 = <&joy_mux_en>; - pinctrl-names = "default"; - poll-interval = <60>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <1023 15>; - linux,code = <ABS_X>; - }; - - axis@1 { - reg = <1>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <15 1023>; - linux,code = <ABS_RX>; - }; - - axis@2 { - reg = <2>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <15 1023>; - linux,code = <ABS_Y>; - }; - - axis@3 { - reg = <3>; - abs-flat = <32>; - abs-fuzz = <32>; - abs-range = <1023 15>; - linux,code = <ABS_RY>; - }; - }; - adc_keys: adc-keys { compatible = "adc-keys"; io-channels = <&saradc 0>; @@ -77,16 +32,6 @@ }; }; - adc_mux: adc-mux { - compatible = "io-channel-mux"; - channels = "left_x", "right_x", "left_y", "right_y"; - #io-channel-cells = <1>; - io-channels = <&saradc 3>; - io-channel-names = "parent"; - mux-controls = <&gpio_mux>; - settle-time-us = <100>; - }; - gpio_keys_control: gpio-keys-control { compatible = "gpio-keys"; pinctrl-0 = <&btn_pins_ctrl>; @@ -128,18 +73,6 @@ linux,code = <BTN_START>; }; - button-thumbl { - gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; - label = "THUMBL"; - linux,code = <BTN_THUMBL>; - }; - - button-thumbr { - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; - label = "THUMBR"; - linux,code = <BTN_THUMBR>; - }; - button-up { gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; label = "DPAD-UP"; @@ -172,13 +105,6 @@ }; }; - gpio_mux: mux-controller { - compatible = "gpio-mux"; - mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, - <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; - #mux-control-cells = <0>; - }; - hdmi-con { compatible = "hdmi-connector"; ddc-i2c-bus = <&i2c5>; diff --git a/dts/src/arm64/rockchip/rk3566-pinetab2-v0.1.dts b/dts/src/arm64/rockchip/rk3566-pinetab2-v0.1.dts new file mode 100644 index 0000000000..5fe6ca5da9 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-pinetab2-v0.1.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-pinetab2.dtsi" + +/ { + model = "Pine64 PineTab2 v0.1"; + compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566"; +}; + +&lcd { + reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>; +}; + +&pinctrl { + lcd0 { + lcd0_rst_l: lcd0-rst-l { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc1 { + vmmc-supply = <&vcc3v3_sys>; +}; diff --git a/dts/src/arm64/rockchip/rk3566-pinetab2-v2.0.dts b/dts/src/arm64/rockchip/rk3566-pinetab2-v2.0.dts new file mode 100644 index 0000000000..9349541cbb --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-pinetab2-v2.0.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-pinetab2.dtsi" + +/ { + model = "Pine64 PineTab2 v2.0"; + compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566"; +}; + +&gpio_keys { + pinctrl-0 = <&kb_id_det>, <&hall_int_l>; + + event-hall-sensor { + debounce-interval = <20>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + label = "Hall Sensor"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; +}; + +&lcd { + reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>; +}; + +&pinctrl { + lcd0 { + lcd0_rst_l: lcd0-rst-l { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hall { + hall_int_l: hall-int-l { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc1 { + vmmc-supply = <&vcc_sys>; +}; diff --git a/dts/src/arm64/rockchip/rk3566-pinetab2.dtsi b/dts/src/arm64/rockchip/rk3566-pinetab2.dtsi new file mode 100644 index 0000000000..db40281eaf --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-pinetab2.dtsi @@ -0,0 +1,943 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> +#include "rk3566.dtsi" + +/ { + chassis-type = "tablet"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <25>; + + button-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <297500>; + }; + + button-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <1750>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 25000 0>; + brightness-levels = <20 220>; + num-interpolated-steps = <200>; + default-brightness-level = <100>; + power-supply = <&vcc_sys>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <6000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4300000>; + voltage-max-design-microvolt = <4350000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4322000 100>, <4250000 95>, <4192000 90>, <4136000 85>, + <4080000 80>, <4022000 75>, <3972000 70>, <3928000 65>, + <3885000 60>, <3833000 55>, <3798000 50>, <3780000 45>, + <3776000 40>, <3773000 35>, <3755000 30>, <3706000 25>, + <3640000 20>, <3589000 15>, <3535000 10>, <3492000 5>, + <3400000 0>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&kb_id_det>; + + tablet-mode-switch { + debounce-interval = <20>; + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + label = "Tablet Mode"; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + led-0 { + compatible = "regulator-led"; + vled-supply = <&vcc5v0_flashled>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_FLASH; + }; + + rk817-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_l>; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + + simple-audio-card,routing = + "MICR", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amplifier OUTL", + "Internal Speakers", "Speaker Amplifier OUTR", + "Speaker Amplifier INL", "HPOL", + "Speaker Amplifier INR", "HPOR"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + simple-audio-card,aux-devs = <&speaker_amp>; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + }; + + speaker_amp: speaker-amplifier { + compatible = "simple-audio-amplifier"; + pinctrl-names = "default"; + pinctrl-0 = <&spk_ctl>; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&vcc_bat>; + }; + + vcc_3v3: vcc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_minipcie: vcc3v3-minipcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren_h>; + regulator-name = "vcc3v3_minipcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcc3v3_sd: vcc3v3-sd-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwren_l>; + regulator-name = "vcc3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_flashled: vcc5v0-flashled-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&flash_led_en_h>; + regulator-name = "vcc5v0_flashled"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v_midu>; + }; + + vcc5v0_usb_host0: vcc5v0-usb-host0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren1_h>; + regulator-name = "vcc5v0_usb_host0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v_midu>; + }; + + vcc5v0_usb_host2: vcc5v0-usb-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren2_h>; + regulator-name = "vcc5v0_usb_host2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v_midu>; + }; + + vcc_bat: vcc-bat-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_bat"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_bat>; + }; + + vdd1v2_dvp: vdd1v2-dvp-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd1v2_dvp"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc_3v3>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, <200000000>, <500000000>; + assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>; +}; + +&csi_dphy { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + clock-master; + #address-cells = <1>; + #size-cells = <0>; + + lcd: panel@0 { + compatible = "boe,th101mb31ig002-28a"; + reg = <0>; + backlight = <&backlight>; + enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + rotation = <90>; + power-supply = <&vcc_3v3>; + + port@0 { + panel_in_dsi: endpoint@0 { + remote-endpoint = <&dsi0_out_con>; + }; + }; + }; +}; + +&dsi0_in { + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; +}; + +&dsi0_out { + dsi0_out_con: endpoint { + remote-endpoint = <&panel_in_dsi>; + }; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_npu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda_0v9_p>; + avdd-1v8-supply = <&vcc_1v8>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v_midu>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_npu: DCDC_REG2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc3v3_sys"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdda_0v9_p: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9_p"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v_midu: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vbus: OTG_SWITCH { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_l_pmuio2>, <&tp_rst_l_pmuio2>; + AVDD28-supply = <&vcc3v3_pmu>; + VDDIO-supply = <&vcca1v8_pmu>; + irq-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; + + vcm@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <&vcc1v8_dvp>; + }; + + camera@36 { + compatible = "ovti,ov5648"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&camerab_pdn_l &camerab_rst_l>; + + clocks = <&cru CLK_CIF_OUT>; + assigned-clocks = <&cru CLK_CIF_OUT>; + assigned-clock-rates = <24000000>; + + avdd-supply = <&vcc2v8_dvp>; + dvdd-supply = <&vdd1v2_dvp>; + dovdd-supply = <&vcc1v8_dvp>; + powerdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + + port { + endpoint { + data-lanes = <1 2>; + remote-endpoint = <0>; + link-frequencies = /bits/ 64 <210000000 168000000>; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + accelerometer@18 { + compatible = "silan,sc7a20"; + reg = <0x18>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int_l>; + st,drdy-int-pin = <1>; + vdd-supply = <&vcc_1v8>; + vddio-supply = <&vcc_1v8>; + mount-matrix = "1", "0", "0", + "0", "0", "1", + "0", "1", "0"; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_minipcie>; + status = "okay"; +}; + +&pinctrl { + camerab { + camerab_pdn_l: camerab-pdn-l { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + camerab_rst_l: camerab-rst-l { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cameraf { + cameraf_pdn_l: cameraf-pdn-l { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cameraf_rst_l: cameraf-rst-l { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + flash { + flash_led_en_h: flash-led-en-h { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fspi { + fspi_dual_io_pins: fspi-dual-io-pins { + rockchip,pins = + /* fspi_clk */ + <1 RK_PD0 1 &pcfg_pull_none>, + /* fspi_cs0n */ + <1 RK_PD3 1 &pcfg_pull_none>, + /* fspi_d0 */ + <1 RK_PD1 1 &pcfg_pull_none>, + /* fspi_d1 */ + <1 RK_PD2 1 &pcfg_pull_none>; + }; + }; + + gsensor { + gsensor_int_l: gsensor-int-l { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + kb { + kb_id_det: kb-id-det { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_pwren_h: lcd-pwren-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_pwren_h: pcie-pwren-h { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_pwren_l: sdmmc-pwren-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_det_l: hp-det-l { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + spk_ctl: spk-ctl { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + tp { + tp_int_l_pmuio2: tp-int-l-pmuio2 { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + tp_rst_l_pmuio2: tp-rst-l-pmuio2 { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usbcc_int_l: usbcc-int-l { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_host_pwren1_h: usb-host-pwren1-h { + rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_host_pwren2_h: usb-host-pwren2-h { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + host_wake_wl: host-wake-wl { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcca1v8_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_1v8>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs200-1_8v; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 + &emmc_clk + &emmc_cmd + &emmc_datastrobe + &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 + &sdmmc0_clk + &sdmmc0_cmd + &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 + &sdmmc1_cmd + &sdmmc1_clk>; + sd-uhs-sdr104; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspi_dual_io_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host0>; + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host2>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3566-powkiddy-rgb10max3.dts b/dts/src/arm64/rockchip/rk3566-powkiddy-rgb10max3.dts new file mode 100644 index 0000000000..e5a474e681 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3566-powkiddy-rgb10max3.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-powkiddy-rk2023.dtsi" + +/ { + model = "Powkiddy RGB10MAX3"; + compatible = "powkiddy,rgb10max3", "rockchip,rk3566"; +}; + +&bluetooth { + compatible = "realtek,rtl8723ds-bt"; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <126400000>; +}; + +&dsi0 { + panel: panel@0 { + compatible = "powkiddy,rgb10max3-panel"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc3v3_lcd0_n>; + pinctrl-0 = <&lcd_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + rotation = <270>; + vcc-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&green_led { + default-state = "on"; + function = LED_FUNCTION_POWER; +}; + +&i2c0 { + vdd_cpu: regulator@40 { + compatible = "fcs,fan53555"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&leds { + amber_led: led-2 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_CHARGING; + max-brightness = <255>; + pwms = <&pwm0 0 25000 0>; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&red_led { + default-state = "off"; + function = LED_FUNCTION_STATUS; +}; diff --git a/dts/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts b/dts/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts index 0ac64f043b..1f567a14ac 100644 --- a/dts/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts +++ b/dts/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts @@ -37,3 +37,21 @@ }; }; }; + +&i2c0 { + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts b/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts index ba32d0793d..bc9933d9e2 100644 --- a/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts +++ b/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts @@ -36,3 +36,21 @@ }; }; }; + +&i2c0 { + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi b/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi index 0fa8f06f94..3ab751a01c 100644 --- a/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi +++ b/dts/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi @@ -614,22 +614,6 @@ rockchip,sleep-filter-current-microamp = <100000>; }; }; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-name = "vdd_cpu"; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc_sys>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; }; &i2c5 { @@ -805,7 +789,7 @@ uart-has-rtscts; status = "okay"; - bluetooth { + bluetooth: bluetooth { compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts index f9127ddfbb..7b5f3904ef 100644 --- a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts +++ b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts @@ -13,7 +13,7 @@ / { model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; - compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; + compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568"; aliases { ethernet0 = &gmac0; diff --git a/dts/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/src/arm64/rockchip/rk3568-qnap-ts433.dts new file mode 100644 index 0000000000..6a99816600 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2024 Uwe Kleine-König + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "rk3568.dtsi" + +/ { + model = "Qnap TS-433-4G NAS System 4-Bay"; + compatible = "qnap,ts433", "rockchip,rk3568"; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + rx_delay = <0x2f>; + tx_delay = <0x3c>; + status = "okay"; +}; + +&i2c0 { + pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + status = "okay"; + + rtc@51 { + compatible = "microcrystal,rv8263"; + reg = <0x51>; + wakeup-source; + }; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x1 { + /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */ + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + status = "okay"; +}; + +/* + * Pins available on CN3 connector at TTL voltage level (3V3). + * ,_ _. + * |1234| 1=TX 2=VCC + * `----' 3=RX 4=GND + */ +&uart2 { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk356x.dtsi b/dts/src/arm64/rockchip/rk356x.dtsi index c19c0f1b37..92f96ec013 100644 --- a/dts/src/arm64/rockchip/rk356x.dtsi +++ b/dts/src/arm64/rockchip/rk356x.dtsi @@ -597,6 +597,7 @@ compatible = "rockchip,rk3568-vpu"; reg = <0x0 0xfdea0000 0x0 0x800>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vdpu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "hclk"; iommus = <&vdpu_mmu>; @@ -1123,7 +1124,7 @@ dmas = <&dmac1 4>, <&dmac1 5>; dma-names = "tx", "rx"; resets = <&cru SRST_M_I2S2_2CH>; - reset-names = "m"; + reset-names = "tx-m"; rockchip,grf = <&grf>; pinctrl-names = "default"; pinctrl-0 = <&i2s2m0_sclktx diff --git a/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi new file mode 100644 index 0000000000..c0d4a15323 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi @@ -0,0 +1,466 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + mmc0 = &sdhci; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_user: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_user_en>; + }; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&pinctrl { + leds { + led_user_en: led_user_en { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts index be6a4f4f90..46d5e21d4d 100644 --- a/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts +++ b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts @@ -6,18 +6,10 @@ /dts-v1/; #include "rk3588.dtsi" #include "rk3588-edgeble-neu6a.dtsi" +#include "rk3588-edgeble-neu6a-io.dtsi" / { model = "Edgeble Neu6A IO Board"; compatible = "edgeble,neural-compute-module-6a-io", "edgeble,neural-compute-module-6a", "rockchip,rk3588"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi new file mode 100644 index 0000000000..963e880ccc --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie3x2: vcc3v3-pcie3x2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_4G_PWEN */ + pinctrl-names = "default"; + pinctrl-0 = <&pcie3x2_vcc3v3_en>; + regulator-name = "vcc3v3_pcie3x2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie3x4: vcc3v3-pcie3x4-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; /* PCIE30x4_PWREN_H */ + pinctrl-names = "default"; + pinctrl-0 = <&pcie3x4_vcc3v3_en>; + regulator-name = "vcc3v3_pcie3x4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +/* ETH */ +&pcie2x1l0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_rst>; + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; /* PCIE20_1_PERST_L */ + vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +/* B-Key and E-Key */ +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie3x2_rst>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */ + vpcie3v3-supply = <&vcc3v3_pcie3x2>; + status = "okay"; +}; + +/* M-Key */ +&pcie3x4 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie3x4_rst>; + reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */ + vpcie3v3-supply = <&vcc3v3_pcie3x4>; + status = "okay"; +}; + +&pinctrl { + pcie2 { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie3 { + pcie3x2_rst: pcie3x2-rst { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3x2_vcc3v3_en: pcie3x2-vcc3v3-en { + rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3x4_rst: pcie3x4-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3x4_vcc3v3_en: pcie3x4-vcc3v3-en { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/* FAN */ +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* RS232 */ +&uart6 { + pinctrl-0 = <&uart6m0_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* RS485 */ +&uart7 { + pinctrl-0 = <&uart7m2_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + /* connected to USB hub, which is powered by vcc5v0_sys */ + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-wifi.dtso b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-wifi.dtso new file mode 100644 index 0000000000..e9a3855e87 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a-wifi.dtso @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + * + * DT-overlay for Edgeble On-SoM WiFi6/BT M.2 1216 modules, + * - AW-XM548NF + * - Intel 8260D2W + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> + +&{/} { + vcc3v3_pcie2x1l1: vcc3v3-pcie2x1l1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; /* WIFI_3V3_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_vcc3v3_en>; + regulator-name = "vcc3v3_pcie2x1l1"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +/* WiFi6 */ +&pcie2x1l1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_rst>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; /* PCIE20_2_WIFI_PERSTn */ + vpcie3v3-supply = <&vcc3v3_pcie2x1l1>; + status = "okay"; +}; + +&pinctrl { + pcie2 { + pcie2_1_rst: pcie2-1-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_1_vcc3v3_en: pcie2-1-vcc-en { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi index 727580aaa1..4c76a00b41 100644 --- a/dts/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi +++ b/dts/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi @@ -3,29 +3,8 @@ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. */ +#include "rk3588-edgeble-neu6a-common.dtsi" + / { compatible = "edgeble,neural-compute-module-6a", "rockchip,rk3588"; - - aliases { - mmc0 = &sdhci; - }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts b/dts/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts index 070baeb634..0d6f1be69a 100644 --- a/dts/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts +++ b/dts/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts @@ -6,84 +6,10 @@ /dts-v1/; #include "rk3588j.dtsi" #include "rk3588-edgeble-neu6b.dtsi" +#include "rk3588-edgeble-neu6a-io.dtsi" / { model = "Edgeble Neu6B IO Board"; compatible = "edgeble,neural-compute-module-6a-io", "edgeble,neural-compute-module-6b", "rockchip,rk3588"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; -}; - -&combphy0_ps { - status = "okay"; -}; - -&i2c6 { - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - wakeup-source; - }; -}; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -/* FAN */ -&pwm2 { - pinctrl-0 = <&pwm2m1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&sata0 { - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - no-sdio; - no-mmc; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3_s3>; - vqmmc-supply = <&vccio_sd_s0>; - status = "okay"; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; -}; - -/* RS232 */ -&uart6 { - pinctrl-0 = <&uart6m0_xfer>; - pinctrl-names = "default"; - status = "okay"; -}; - -/* RS485 */ -&uart7 { - pinctrl-0 = <&uart7m2_xfer>; - pinctrl-names = "default"; - status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi b/dts/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi index 017559bba3..c4634bc09f 100644 --- a/dts/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi +++ b/dts/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi @@ -3,387 +3,8 @@ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd. */ +#include "rk3588-edgeble-neu6a-common.dtsi" + / { compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588"; - - aliases { - mmc0 = &sdhci; - }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_1v1_nldo_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&spi2 { - status = "okay"; - assigned-clocks = <&cru CLK_SPI2>; - assigned-clock-rates = <200000000>; - num-cs = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; - - pmic@0 { - compatible = "rockchip,rk806"; - spi-max-frequency = <1000000>; - reg = <0x0>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, - <&rk806_dvs2_null>, <&rk806_dvs3_null>; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc5v0_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc_2v0_pldo_s3>; - vcc12-supply = <&vcc5v0_sys>; - vcc13-supply = <&vcc_1v1_nldo_s3>; - vcc14-supply = <&vcc_1v1_nldo_s3>; - vcca-supply = <&vcc5v0_sys>; - - gpio-controller; - #gpio-cells = <2>; - - rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs2_null: dvs2-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs3_null: dvs3-null-pins { - pins = "gpio_pwrctrl3"; - function = "pin_fun0"; - }; - - regulators { - vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { - regulator-name = "vdd_gpu_s0"; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-enable-ramp-delay = <400>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { - regulator-name = "vdd_cpu_lit_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_log_s0: dcdc-reg3 { - regulator-name = "vdd_log_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <750000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { - regulator-name = "vdd_vdenc_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-init-microvolt = <750000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_ddr_s0: dcdc-reg5 { - regulator-name = "vdd_ddr_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <900000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - vdd2_ddr_s3: dcdc-reg6 { - regulator-name = "vdd2_ddr_s3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_2v0_pldo_s3: dcdc-reg7 { - regulator-name = "vdd_2v0_pldo_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2000000>; - }; - }; - - vcc_3v3_s3: dcdc-reg8 { - regulator-name = "vcc_3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vddq_ddr_s0: dcdc-reg9 { - regulator-name = "vddq_ddr_s0"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: dcdc-reg10 { - regulator-name = "vcc_1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avcc_1v8_s0: pldo-reg1 { - regulator-name = "avcc_1v8_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s0: pldo-reg2 { - regulator-name = "vcc_1v8_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avdd_1v2_s0: pldo-reg3 { - regulator-name = "avdd_1v2_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3_s0: pldo-reg4 { - regulator-name = "vcc_3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd_s0: pldo-reg5 { - regulator-name = "vccio_sd_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - pldo6_s3: pldo-reg6 { - regulator-name = "pldo6_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_0v75_s3: nldo-reg1 { - regulator-name = "vdd_0v75_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_ddr_pll_s0: nldo-reg2 { - regulator-name = "vdd_ddr_pll_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - avdd_0v75_s0: nldo-reg3 { - regulator-name = "avdd_0v75_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v85_s0: nldo-reg4 { - regulator-name = "vdd_0v85_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v75_s0: nldo-reg5 { - regulator-name = "vdd_0v75_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; }; diff --git a/dts/src/arm64/rockchip/rk3588-nanopc-t6.dts b/dts/src/arm64/rockchip/rk3588-nanopc-t6.dts index 997b516c25..ad8e36a339 100644 --- a/dts/src/arm64/rockchip/rk3588-nanopc-t6.dts +++ b/dts/src/arm64/rockchip/rk3588-nanopc-t6.dts @@ -159,6 +159,29 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; + + vcc3v3_sd_s0: vcc3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + enable-active-low; + gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vdd_4g_3v3: vdd-4g-3v3-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pin_4g_lte_pwren>; + regulator-name = "vdd_4g_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; }; &combphy0_ps { @@ -504,6 +527,10 @@ }; usb { + pin_4g_lte_pwren: 4g-lte-pwren { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + typec5v_pwren: typec5v-pwren { rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -539,11 +566,12 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; no-mmc; no-sdio; sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3_s3>; + vmmc-supply = <&vcc3v3_sd_s0>; vqmmc-supply = <&vccio_sd_s0>; status = "okay"; }; @@ -884,6 +912,7 @@ }; &u2phy2_host { + phy-supply = <&vdd_4g_3v3>; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3588-orangepi-5-plus.dts b/dts/src/arm64/rockchip/rk3588-orangepi-5-plus.dts index 3e660ff6cd..1b606ea5b6 100644 --- a/dts/src/arm64/rockchip/rk3588-orangepi-5-plus.dts +++ b/dts/src/arm64/rockchip/rk3588-orangepi-5-plus.dts @@ -444,7 +444,6 @@ &sdmmc { bus-width = <4>; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; max-frequency = <150000000>; no-sdio; diff --git a/dts/src/arm64/rockchip/rk3588-quartzpro64.dts b/dts/src/arm64/rockchip/rk3588-quartzpro64.dts index 87a0abf95f..67414d72e2 100644 --- a/dts/src/arm64/rockchip/rk3588-quartzpro64.dts +++ b/dts/src/arm64/rockchip/rk3588-quartzpro64.dts @@ -429,7 +429,6 @@ &sdmmc { bus-width = <4>; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; max-frequency = <150000000>; no-sdio; diff --git a/dts/src/arm64/rockchip/rk3588-rock-5b.dts b/dts/src/arm64/rockchip/rk3588-rock-5b.dts index a0e303c3a1..1fe8b2a0ed 100644 --- a/dts/src/arm64/rockchip/rk3588-rock-5b.dts +++ b/dts/src/arm64/rockchip/rk3588-rock-5b.dts @@ -58,6 +58,13 @@ #cooling-cells = <2>; }; + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-pcie-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -371,7 +378,6 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; diff --git a/dts/src/arm64/rockchip/rk3588-tiger-haikou.dts b/dts/src/arm64/rockchip/rk3588-tiger-haikou.dts new file mode 100644 index 0000000000..d672198c6b --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588-tiger-haikou.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3588-tiger.dtsi" + +/ { + model = "Theobroma Systems RK3588-Q7 SoM on Haikou devkit"; + compatible = "tsd,rk3588-tiger-haikou", "tsd,rk3588-tiger", "rockchip,rk3588"; + + aliases { + ethernet0 = &gmac0; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&haikou_keys_pin>; + + button-batlow-n { + label = "BATLOW#"; + linux,code = <KEY_BATTERY>; + gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; + }; + + button-slp-btn-n { + label = "SLP_BTN#"; + linux,code = <KEY_SLEEP>; + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + }; + + button-wake-n { + label = "WAKE#"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + switch-lid-btn-n { + label = "LID_BTN#"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + }; + }; + + i2s3-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Haikou,I2S-codec"; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,frame-master = <&sgtl5000_codec>; + simple-audio-card,bitclock-master = <&sgtl5000_codec>; + + sgtl5000_codec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s3_2ch>; + }; + }; + + sgtl5000_clk: sgtl5000-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + vcc3v3_baseboard: vcc3v3-baseboard-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_low_noise: vcc3v3-low-noise-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_low_noise"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_baseboard: vcc5v0-baseboard-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vddd_audio_1v6: vddd-audio-1v6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vddd_audio_1v6"; + regulator-boot-on; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1600000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +&gmac0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + eeprom@50 { + reg = <0x50>; + compatible = "atmel,24c01"; + pagesize = <8>; + size = <128>; + vcc-supply = <&vcc3v3_baseboard>; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&sgtl5000_clk>; + #sound-dai-cells = <0>; + VDDA-supply = <&vcc3v3_low_noise>; + VDDIO-supply = <&vcc3v3_baseboard>; + VDDD-supply = <&vddd_audio_1v6>; + }; +}; + +&i2c8 { + status = "okay"; +}; + +&i2s3_2ch { + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + vpcie3v3-supply = <&vcc3v3_baseboard>; + status = "okay"; +}; + +&pinctrl { + haikou { + haikou_keys_pin: haikou-keys-pin { + rockchip,pins = + /* BATLOW# */ + <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + /* SLP_BTN# */ + <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + /* WAKE# */ + <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + /* LID_BTN */ + <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + /* while the same pin, sdmmc_det does not detect card changes */ + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_baseboard>; + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m2_xfer>; + status = "okay"; +}; + +&uart5 { + rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* host0 on Q7_USB_P2, lower usb3 port */ +&usb_host0_ehci { + status = "okay"; +}; + +/* host0 on Q7_USB_P2, lower usb3 port */ +&usb_host0_ohci { + status = "okay"; +}; + +/* host1 on Q7_USB_P3, usb2 port */ +&usb_host1_ehci { + status = "okay"; +}; + +/* host1 on Q7_USB_P3, usb2 port */ +&usb_host1_ohci { + status = "okay"; +}; + +/* host2 on Q7_USB_P2, lower usb3 port */ +&usb_host2_xhci { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3588-tiger.dtsi b/dts/src/arm64/rockchip/rk3588-tiger.dtsi new file mode 100644 index 0000000000..1eb2543a5f --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588-tiger.dtsi @@ -0,0 +1,690 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588.dtsi" + +/ { + compatible = "tsd,rk3588-tiger", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + rtc0 = &rtc_twi; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&module_led_pin>; + + /* Named LED1 on the board */ + led-1 { + gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_AMBER>; + }; + }; + + /* + * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE + * clock generator. + * The clock output is gated via the OE pin on the clock generator. + * This is modeled as a fixed-clock plus a gpio-gate-clock. + */ + pcie_refclk_gen: pcie-refclk-gen-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + + pcie_refclk: pcie-refclk-clock { + compatible = "gpio-gate-clock"; + clocks = <&pcie_refclk_gen>; + #clock-cells = <0>; + enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */ + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v2_s3: vcc-1v2-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v2_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_baseboard>; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + phy-supply = <&vcc_1v2_s3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_rx_bus2 + &gmac0_tx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus + ð0_pins + ð_reset>; + tx_delay = <0x10>; + rx_delay = <0x10>; + snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 100000>; +}; + +&i2c1 { + pinctrl-0 = <&i2c1m0_xfer>; +}; + +&i2c1m0_xfer { + rockchip,pins = + /* i2c1_scl_m0 */ + <0 RK_PB5 9 &pcfg_pull_none_drv_level_0>, + /* i2c1_sda_m0 */ + <0 RK_PB6 9 &pcfg_pull_none_drv_level_0>; +}; + +&i2c2 { + pinctrl-0 = <&i2c2m3_xfer>; + status = "okay"; +}; + +&i2c2m3_xfer { + rockchip,pins = + /* i2c2_scl_m3 */ + <1 RK_PC5 9 &pcfg_pull_none_drv_level_0>, + /* i2c2_sda_m3 */ + <1 RK_PC4 9 &pcfg_pull_none_drv_level_0>; +}; + +&i2c3 { + pinctrl-0 = <&i2c3m0_xfer>; +}; + +&i2c4 { + pinctrl-0 = <&i2c4m4_xfer>; + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c5 { + pinctrl-0 = <&i2c5m1_xfer>; +}; + +&i2c5m1_xfer { + rockchip,pins = + /* i2c5_scl_m1 */ + <4 RK_PB6 9 &pcfg_pull_none_drv_level_0>, + /* i2c5_sda_m1 */ + <4 RK_PB7 9 &pcfg_pull_none_drv_level_0>; +}; + +&i2c6 { + /* + * Mule-ATtiny can handle up to Fast mode Plus (1MHz) on I2C bus, + * but SOC can handle only up to (400kHz). + */ + clock-frequency = <400000>; + status = "okay"; + + fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c6m0_xfer { + rockchip,pins = + /* i2c6_scl_m0 */ + <0 RK_PD0 9 &pcfg_pull_none_drv_level_0>, + /* i2c6_sda_m0 */ + <0 RK_PC7 9 &pcfg_pull_none_drv_level_0>; +}; + +&i2c7 { + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c7m0_xfer { + rockchip,pins = + /* i2c7_scl_m0 */ + <1 RK_PD0 9 &pcfg_pull_none_drv_level_0>, + /* i2c7_sda_m0 */ + <1 RK_PD1 9 &pcfg_pull_none_drv_level_0>; +}; + +&i2c8 { + pinctrl-0 = <&i2c8m2_xfer>; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@6 { + /* KSZ9031 or KSZ9131 */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x6>; + clocks = <&cru REFCLKO25M_ETH0_OUT>; + }; +}; + +&pcie3x4 { + /* + * The board has a gpio-controlled "pcie_refclk" generator, + * so add it to the list of clocks. + */ + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>, + <&pcie_refclk>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe", + "ref"; + reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; +}; + +&pinctrl { + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ethernet { + eth_reset: eth-reset { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + module_led_pin: module-led-pin { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + mmc-pwrseq = <&emmc_pwrseq>; + no-sdio; + no-sd; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>; + supports-cqe; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <150000000>; + vqmmc-supply = <&vccio_sd_s0>; +}; + +&spi0 { + pinctrl-0 = <&spi0m1_cs0 &spi0m1_cs1 &spi0m3_pins>; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vcc_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-name = "vcca_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-name = "vdda_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-name = "vcca_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdda_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdda_0v75_s0: nldo-reg3 { + regulator-name = "vdda_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-name = "vdda_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +/* Mule-ATtiny UPDI */ +&uart4 { + pinctrl-0 = <&uart4m2_xfer>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3588-toybrick-x0.dts b/dts/src/arm64/rockchip/rk3588-toybrick-x0.dts new file mode 100644 index 0000000000..9090c5c99f --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588-toybrick-x0.dts @@ -0,0 +1,688 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588.dtsi" + +/ { + model = "Rockchip Toybrick TB-RK3588X Board"; + compatible = "rockchip,rk3588-toybrick-x0", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + + button-menu { + label = "Menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <890000>; + }; + + button-escape { + label = "Escape"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1235000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc12v_dcin>; + pwms = <&pwm2 0 25000 0>; + }; + + pcie20_avdd0v85: pcie20-avdd0v85-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie20_avdd0v85"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + pcie20_avdd1v8: pcie20-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie20_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + pcie30_avdd0v75: pcie30-avdd0v75-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v75"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + vin-supply = <&avdd_0v75_s0>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + pinctrl-names = "default"; + rx_delay = <0x00>; + tx_delay = <0x43>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-init-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3588s-indiedroid-nova.dts b/dts/src/arm64/rockchip/rk3588s-indiedroid-nova.dts index 3c22788868..ce8119cbb8 100644 --- a/dts/src/arm64/rockchip/rk3588s-indiedroid-nova.dts +++ b/dts/src/arm64/rockchip/rk3588s-indiedroid-nova.dts @@ -141,6 +141,10 @@ status = "okay"; }; +&combphy2_psu { + status = "okay"; +}; + &cpu_l0 { cpu-supply = <&vdd_cpu_lit_s0>; }; @@ -842,3 +846,7 @@ &usb_host1_ohci { status = "okay"; }; + +&usb_host2_xhci { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3588s-nanopi-r6c.dts b/dts/src/arm64/rockchip/rk3588s-nanopi-r6c.dts new file mode 100644 index 0000000000..497bbb5707 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588s-nanopi-r6c.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3588s-nanopi-r6s.dts" + +/ { + model = "FriendlyElec NanoPi R6C"; + compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s"; +}; + +&lan2_led { + label = "user_led"; +}; diff --git a/dts/src/arm64/rockchip/rk3588s-nanopi-r6s.dts b/dts/src/arm64/rockchip/rk3588s-nanopi-r6s.dts new file mode 100644 index 0000000000..4fa644ae51 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3588s-nanopi-r6s.dts @@ -0,0 +1,764 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "rk3588s.dtsi" + +/ { + model = "FriendlyElec NanoPi R6S"; + compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Maskrom"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1800>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key1_pin>; + + button-user { + label = "User"; + linux,code = <BTN_1>; + gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; + debounce-interval = <50>; + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_led: led-0 { + label = "sys_led"; + gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_pin>; + }; + + wan_led: led-1 { + label = "wan_led"; + gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wan_led_pin>; + }; + + lan1_led: led-2 { + label = "lan1_led"; + gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lan1_led_pin>; + }; + + lan2_led: led-3 { + label = "lan2_led"; + gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lan2_led_pin>; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_3v3_s0: vcc-3v3-s0-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwr>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_3v3_pcie20: vcc3v3-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_pcie20"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vcc5v0_usb_otg0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_host_20: vcc5v0-host-20-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host20_en>; + regulator-name = "vcc5v0_host_20"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + pinctrl-names = "default"; + tx_delay = <0x42>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + clock-frequency = <200000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6m0_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1l1 { + reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie20>; + status = "okay"; +}; + +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie20>; + status = "okay"; +}; + +&pinctrl { + gpio-key { + key1_pin: key1-pin { + rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + sys_led_pin: sys-led-pin { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan1_led_pin: lan1-led-pin { + rockchip,pins = + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan2_led_pin: lan2-led-pin { + rockchip,pins = + <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host20_en: vcc5v0-host20-en { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-mmc; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + avdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "avdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "avdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host_20>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3588s-rock-5a.dts b/dts/src/arm64/rockchip/rk3588s-rock-5a.dts index 2002fd0221..00afb90d4e 100644 --- a/dts/src/arm64/rockchip/rk3588s-rock-5a.dts +++ b/dts/src/arm64/rockchip/rk3588s-rock-5a.dts @@ -366,7 +366,6 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; max-frequency = <150000000>; no-sdio; diff --git a/dts/src/arm64/rockchip/rk3588s.dtsi b/dts/src/arm64/rockchip/rk3588s.dtsi index 36b1b7acfe..87b83c87bd 100644 --- a/dts/src/arm64/rockchip/rk3588s.dtsi +++ b/dts/src/arm64/rockchip/rk3588s.dtsi @@ -519,6 +519,7 @@ vo1_grf: syscon@fd5a8000 { compatible = "rockchip,rk3588-vo-grf", "syscon"; reg = <0x0 0xfd5a8000 0x0 0x100>; + clocks = <&cru PCLK_VO1GRF>; }; php_grf: syscon@fd5b0000 { @@ -586,6 +587,11 @@ }; }; + hdptxphy0_grf: syscon@fd5e0000 { + compatible = "rockchip,rk3588-hdptxphy-grf", "syscon"; + reg = <0x0 0xfd5e0000 0x0 0x100>; + }; + ioc: syscon@fd5f0000 { compatible = "rockchip,rk3588-ioc", "syscon"; reg = <0x0 0xfd5f0000 0x0 0x10000>; @@ -1704,7 +1710,6 @@ dmas = <&dmac1 0>, <&dmac1 1>; dma-names = "tx", "rx"; power-domains = <&power RK3588_PD_AUDIO>; - rockchip,trcm-sync-tx-only; pinctrl-names = "default"; pinctrl-0 = <&i2s2m1_lrck &i2s2m1_sclk @@ -1725,7 +1730,6 @@ dmas = <&dmac1 2>, <&dmac1 3>; dma-names = "tx", "rx"; power-domains = <&power RK3588_PD_AUDIO>; - rockchip,trcm-sync-tx-only; pinctrl-names = "default"; pinctrl-0 = <&i2s3_lrck &i2s3_sclk @@ -2360,6 +2364,22 @@ #dma-cells = <1>; }; + hdptxphy_hdmi0: phy@fed60000 { + compatible = "rockchip,rk3588-hdptx-phy"; + reg = <0x0 0xfed60000 0x0 0x2000>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; + clock-names = "ref", "apb"; + #phy-cells = <0>; + resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, + <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, + <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>, + <&cru SRST_HDPTX0_LCPLL>; + reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", + "lcpll"; + rockchip,grf = <&hdptxphy0_grf>; + status = "disabled"; + }; + combphy0_ps: phy@fee00000 { compatible = "rockchip,rk3588-naneng-combphy"; reg = <0x0 0xfee00000 0x0 0x100>; diff --git a/dts/src/arm64/st/stm32mp251.dtsi b/dts/src/arm64/st/stm32mp251.dtsi index 96859d098e..5dd4f3580a 100644 --- a/dts/src/arm64/st/stm32mp251.dtsi +++ b/dts/src/arm64/st/stm32mp251.dtsi @@ -52,6 +52,18 @@ compatible = "fixed-clock"; clock-frequency = <200000000>; }; + + ck_icn_p_vdec: ck-icn-p-vdec { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + + ck_icn_p_venc: ck-icn-p-venc { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; }; firmware { diff --git a/dts/src/arm64/st/stm32mp255.dtsi b/dts/src/arm64/st/stm32mp255.dtsi index e6fa596211..17f197c5b2 100644 --- a/dts/src/arm64/st/stm32mp255.dtsi +++ b/dts/src/arm64/st/stm32mp255.dtsi @@ -6,4 +6,21 @@ #include "stm32mp253.dtsi" / { + soc@0 { + rifsc: rifsc-bus@42080000 { + vdec: vdec@480d0000 { + compatible = "st,stm32mp25-vdec"; + reg = <0x480d0000 0x3c8>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_icn_p_vdec>; + }; + + venc: venc@480e0000 { + compatible = "st,stm32mp25-venc"; + reg = <0x480e0000 0x800>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_icn_ls_mcu>; + }; + }; + }; }; diff --git a/dts/src/arm64/tesla/fsd.dtsi b/dts/src/arm64/tesla/fsd.dtsi index aaffb50b8b..047a83cee6 100644 --- a/dts/src/arm64/tesla/fsd.dtsi +++ b/dts/src/arm64/tesla/fsd.dtsi @@ -601,6 +601,7 @@ clocks = <&clock_peric PERIC_PCLK_UART0>, <&clock_peric PERIC_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; status = "disabled"; }; @@ -613,6 +614,7 @@ clocks = <&clock_peric PERIC_PCLK_UART1>, <&clock_peric PERIC_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; status = "disabled"; }; diff --git a/dts/src/arm64/ti/k3-am62-lp-sk.dts b/dts/src/arm64/ti/k3-am62-lp-sk.dts index 5e6feb8cd1..c4149059a4 100644 --- a/dts/src/arm64/ti/k3-am62-lp-sk.dts +++ b/dts/src/arm64/ti/k3-am62-lp-sk.dts @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP * - * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am62-main.dtsi b/dts/src/arm64/ti/k3-am62-main.dtsi index 464b7565d0..e9cffca073 100644 --- a/dts/src/arm64/ti/k3-am62-main.dtsi +++ b/dts/src/arm64/ti/k3-am62-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM625 SoC Family Main Domain peripherals * - * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_main { @@ -42,9 +42,8 @@ }; }; - main_conf: syscon@100000 { - compatible = "syscon", "simple-mfd"; - reg = <0x00 0x00100000 0x00 0x20000>; + main_conf: bus@100000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x00 0x00100000 0x20000>; @@ -559,10 +558,9 @@ clock-names = "clk_ahb", "clk_xin"; assigned-clocks = <&k3_clks 57 6>; assigned-clock-parents = <&k3_clks 57 8>; + bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; - ti,trm-icp = <0x2>; - bus-width = <8>; ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-mmc-hs = <0x0>; @@ -580,7 +578,8 @@ power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; clock-names = "clk_ahb", "clk_xin"; - ti,trm-icp = <0x2>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x8>; ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0x0>; @@ -592,8 +591,6 @@ ti,itap-del-sel-sd-hs = <0x1>; ti,itap-del-sel-sdr12 = <0xa>; ti,itap-del-sel-sdr25 = <0x1>; - ti,clkbuf-sel = <0x7>; - bus-width = <4>; status = "disabled"; }; @@ -604,7 +601,8 @@ power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; clock-names = "clk_ahb", "clk_xin"; - ti,trm-icp = <0x2>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x8>; ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0x0>; @@ -616,7 +614,6 @@ ti,itap-del-sel-sd-hs = <0xa>; ti,itap-del-sel-sdr12 = <0xa>; ti,itap-del-sel-sdr25 = <0x1>; - ti,clkbuf-sel = <0x7>; status = "disabled"; }; @@ -640,6 +637,8 @@ interrupt-names = "host", "peripheral"; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; }; }; @@ -663,6 +662,8 @@ interrupt-names = "host", "peripheral"; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; }; }; @@ -779,9 +780,10 @@ <0x00 0x30207000 0x00 0x1000>, /* ovr1 */ <0x00 0x30208000 0x00 0x1000>, /* ovr2 */ <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */ - <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */ + <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */ + <0x00 0x30201000 0x00 0x1000>; /* common1 */ reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2"; + "ovr1", "ovr2", "vp1", "vp2", "common1"; power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 186 6>, <&dss_vp1_clk>, diff --git a/dts/src/arm64/ti/k3-am62-mcu.dtsi b/dts/src/arm64/ti/k3-am62-mcu.dtsi index 0e0b234581..e66d486ef1 100644 --- a/dts/src/arm64/ti/k3-am62-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am62-mcu.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM625 SoC Family MCU Domain peripherals * - * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { diff --git a/dts/src/arm64/ti/k3-am62-phycore-som.dtsi b/dts/src/arm64/ti/k3-am62-phycore-som.dtsi index aa43e7407e..43488cc8bc 100644 --- a/dts/src/arm64/ti/k3-am62-phycore-som.dtsi +++ b/dts/src/arm64/ti/k3-am62-phycore-som.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH + * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> * * Product homepage: @@ -317,7 +317,6 @@ &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; non-removable; status = "okay"; diff --git a/dts/src/arm64/ti/k3-am62-thermal.dtsi b/dts/src/arm64/ti/k3-am62-thermal.dtsi index a358757e26..12ba833002 100644 --- a/dts/src/arm64/ti/k3-am62-thermal.dtsi +++ b/dts/src/arm64/ti/k3-am62-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-am62-verdin-dahlia.dtsi b/dts/src/arm64/ti/k3-am62-verdin-dahlia.dtsi index bf6d27e70b..6c4cec8728 100644 --- a/dts/src/arm64/ti/k3-am62-verdin-dahlia.dtsi +++ b/dts/src/arm64/ti/k3-am62-verdin-dahlia.dtsi @@ -185,7 +185,6 @@ /* Verdin SD_1 */ &sdhci1 { - ti,driver-strength-ohm = <33>; status = "okay"; }; diff --git a/dts/src/arm64/ti/k3-am62-verdin-dev.dtsi b/dts/src/arm64/ti/k3-am62-verdin-dev.dtsi index 680071688d..be62648e78 100644 --- a/dts/src/arm64/ti/k3-am62-verdin-dev.dtsi +++ b/dts/src/arm64/ti/k3-am62-verdin-dev.dtsi @@ -206,7 +206,6 @@ /* Verdin SD_1 */ &sdhci1 { - ti,driver-strength-ohm = <33>; status = "okay"; }; diff --git a/dts/src/arm64/ti/k3-am62-verdin-mallow.dtsi b/dts/src/arm64/ti/k3-am62-verdin-mallow.dtsi index 17b93534f6..77b1beb638 100644 --- a/dts/src/arm64/ti/k3-am62-verdin-mallow.dtsi +++ b/dts/src/arm64/ti/k3-am62-verdin-mallow.dtsi @@ -127,6 +127,16 @@ <&pinctrl_qspi1_cs2_gpio>; cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>; + interrupt-parent = <&main_gpio1>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <18500000>; + }; }; /* Verdin UART_3 */ diff --git a/dts/src/arm64/ti/k3-am62-verdin-wifi.dtsi b/dts/src/arm64/ti/k3-am62-verdin-wifi.dtsi index a6808b10c7..4768ef42c4 100644 --- a/dts/src/arm64/ti/k3-am62-verdin-wifi.dtsi +++ b/dts/src/arm64/ti/k3-am62-verdin-wifi.dtsi @@ -26,7 +26,6 @@ mmc-pwrseq = <&wifi_pwrseq>; non-removable; ti,fails-without-test-cd; - ti,driver-strength-ohm = <50>; vmmc-supply = <®_3v3>; status = "okay"; }; diff --git a/dts/src/arm64/ti/k3-am62-verdin.dtsi b/dts/src/arm64/ti/k3-am62-verdin.dtsi index 6a06724b6d..e8d8857ad5 100644 --- a/dts/src/arm64/ti/k3-am62-verdin.dtsi +++ b/dts/src/arm64/ti/k3-am62-verdin.dtsi @@ -42,6 +42,22 @@ usb1 = &usb1; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_id>; + id-gpios = <&main_gpio1 19 GPIO_ACTIVE_HIGH>; + label = "USB_1"; + self-powered; + vbus-supply = <®_usb0_vbus>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb0_ep>; + }; + }; + }; + verdin_gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -151,6 +167,18 @@ vin-supply = <®_sd_3v3_1v8>; }; + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_en>; + enable-active-high; + /* Verdin USB_1_EN (SODIMM 155) */ + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB_1_EN"; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -436,6 +464,13 @@ >; }; + /* Verdin USB_1_EN */ + pinctrl_usb0_en: main-gpio1-50-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0254, PIN_INPUT, 7) /* (C20) USB0_DRVVBUS.GPIO1_50 */ /* SODIMM 155 */ + >; + }; + /* On-module I2C - PMIC_I2C */ pinctrl_i2c0: main-i2c0-default-pins { pinctrl-single,pins = < @@ -660,13 +695,6 @@ >; }; - /* Verdin USB_1 */ - pinctrl_usb0: main-usb0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x0254, PIN_OUTPUT, 0) /* (C20) USB0_DRVVBUS */ /* SODIMM 155 */ - >; - }; - /* Verdin USB_2 */ pinctrl_usb1: main-usb1-default-pins { pinctrl-single,pins = < @@ -1013,7 +1041,7 @@ "", "", "SODIMM_17", - "", /* 50 */ + "SODIMM_155", /* 50 */ "", "", "", @@ -1118,7 +1146,7 @@ regulator-always-on; regulator-boot-on; regulator-max-microvolt = <850000>; - regulator-min-microvolt = <850000>; + regulator-min-microvolt = <750000>; regulator-name = "+VDD_CORE (PMIC BUCK1)"; }; @@ -1407,7 +1435,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdhci0>; non-removable; - ti,driver-strength-ohm = <50>; status = "okay"; }; @@ -1416,7 +1443,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdhci1>; disable-wp; - ti,driver-strength-ohm = <50>; vmmc-supply = <®_sdhc1_vmmc>; vqmmc-supply = <®_sdhc1_vqmmc>; status = "disabled"; @@ -1428,11 +1454,16 @@ status = "disabled"; }; -/* TODO: role swich using ID pin */ &usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>; + adp-disable; + usb-role-switch; status = "disabled"; + + port { + usb0_ep: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; }; /* Verdin USB_2 */ diff --git a/dts/src/arm64/ti/k3-am62-wakeup.dtsi b/dts/src/arm64/ti/k3-am62-wakeup.dtsi index fef76f52a5..23ce1bfda8 100644 --- a/dts/src/arm64/ti/k3-am62-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am62-wakeup.dtsi @@ -1,10 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals * - * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <dt-bindings/bus/ti-sysc.h> + &cbass_wakeup { wkup_conf: syscon@43000000 { bootph-all; @@ -21,14 +23,34 @@ }; }; - wkup_uart0: serial@2b300000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x2b300000 0x00 0x100>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + target-module@2b300050 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x00 0x2b300050 0x00 0x4>, + <0x00 0x2b300054 0x00 0x4>, + <0x00 0x2b300058 0x00 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + ti,no-reset-on-init; power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 114 0>; - clock-names = "fclk"; - status = "disabled"; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x2b300000 0x100000>; + + wkup_uart0: serial@0 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; wkup_i2c0: i2c@2b200000 { diff --git a/dts/src/arm64/ti/k3-am62.dtsi b/dts/src/arm64/ti/k3-am62.dtsi index f1e15206e1..f0781f2bea 100644 --- a/dts/src/arm64/ti/k3-am62.dtsi +++ b/dts/src/arm64/ti/k3-am62.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM62 SoC Family * - * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h> diff --git a/dts/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/dts/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso index 5e80ca7033..3b4643b7d1 100644 --- a/dts/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso +++ b/dts/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module - * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/dts/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso index 5e1cbbc27c..81a2763d43 100644 --- a/dts/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso +++ b/dts/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Technexion TEVI-OV5640-*-RPI - OV5640 camera module - * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am625-beagleplay.dts b/dts/src/arm64/ti/k3-am625-beagleplay.dts index eadbdd9ffe..a34e0df2ab 100644 --- a/dts/src/arm64/ti/k3-am625-beagleplay.dts +++ b/dts/src/arm64/ti/k3-am625-beagleplay.dts @@ -1,9 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * https://beagleplay.org/ * - * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation */ /dts-v1/; @@ -29,7 +29,6 @@ i2c3 = &main_i2c3; i2c4 = &wkup_i2c0; i2c5 = &mcu_i2c0; - mdio-gpio0 = &mdio0; mmc0 = &sdhci0; mmc1 = &sdhci1; mmc2 = &sdhci2; @@ -231,27 +230,6 @@ }; }; - /* Workaround for errata i2329 - just use mdio bitbang */ - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&mdio0_pins_default>; - gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */ - <&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */ - #address-cells = <1>; - #size-cells = <0>; - - cpsw3g_phy0: ethernet-phy@0 { - reg = <0>; - }; - - cpsw3g_phy1: ethernet-phy@1 { - reg = <1>; - reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>; - reset-assert-us = <25>; - reset-deassert-us = <60000>; /* T2 */ - }; - }; }; &main_pmx0 { @@ -312,8 +290,8 @@ mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */ - AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */ + AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ + AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ >; }; @@ -573,11 +551,13 @@ }; &usbss0 { + bootph-all; ti,vbus-divider; status = "okay"; }; &usb0 { + bootph-all; dr_mode = "peripheral"; }; @@ -611,8 +591,20 @@ }; &cpsw3g_mdio { - /* Workaround for errata i2329 - Use mdio bitbang */ - status = "disabled"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <25>; + reset-deassert-us = <60000>; /* T2 */ + }; }; &main_gpio0 { @@ -827,7 +819,6 @@ bootph-all; pinctrl-names = "default"; pinctrl-0 = <&emmc_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; status = "okay"; }; @@ -840,7 +831,6 @@ vmmc-supply = <&vdd_3v3_sd>; vqmmc-supply = <&vdd_sd_dv>; - ti,driver-strength-ohm = <50>; disable-wp; cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; cd-debounce-delay-ms = <100>; @@ -852,12 +842,10 @@ vmmc-supply = <&wlan_en>; pinctrl-names = "default"; pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>; - bus-width = <4>; non-removable; ti,fails-without-test-cd; cap-power-off-card; keep-power-in-suspend; - ti,driver-strength-ohm = <50>; assigned-clocks = <&k3_clks 157 158>; assigned-clock-parents = <&k3_clks 157 160>; #address-cells = <1>; diff --git a/dts/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts b/dts/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts index 4bc0134c98..a83a904978 100644 --- a/dts/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/dts/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH + * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> * * Product homepage: @@ -222,6 +222,7 @@ cpsw3g_phy3: ethernet-phy@3 { compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; reg = <3>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; }; @@ -333,7 +334,6 @@ vqmmc-supply = <&vddshv5_sdio>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; no-1-8-v; status = "okay"; diff --git a/dts/src/arm64/ti/k3-am625-sk.dts b/dts/src/arm64/ti/k3-am625-sk.dts index b18092497c..ae81ebb39d 100644 --- a/dts/src/arm64/ti/k3-am625-sk.dts +++ b/dts/src/arm64/ti/k3-am625-sk.dts @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * AM625 SK: https://www.ti.com/lit/zip/sprr448 * - * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am625.dtsi b/dts/src/arm64/ti/k3-am625.dtsi index 4193c2b3ee..4014add632 100644 --- a/dts/src/arm64/ti/k3-am625.dtsi +++ b/dts/src/arm64/ti/k3-am625.dtsi @@ -1,10 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM625 SoC family in Quad core configuration * * TRM: https://www.ti.com/lit/pdf/spruiv7 * - * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am62a-main.dtsi b/dts/src/arm64/ti/k3-am62a-main.dtsi index f0b8c9ab14..aa1e057082 100644 --- a/dts/src/arm64/ti/k3-am62a-main.dtsi +++ b/dts/src/arm64/ti/k3-am62a-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM62A SoC Family Main Domain peripherals * - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_main { @@ -42,9 +42,8 @@ }; }; - main_conf: syscon@100000 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00 0x00100000 0x00 0x20000>; + main_conf: bus@100000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x00100000 0x20000>; @@ -536,6 +535,24 @@ status = "disabled"; }; + sdhci0: mmc@fa10000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 57 6>; + assigned-clock-parents = <&k3_clks 57 8>; + bus-width = <8>; + mmc-hs200-1_8v; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-hs200 = <0x6>; + status = "disabled"; + }; + sdhci1: mmc@fa00000 { compatible = "ti,am62-sdhci"; reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>; @@ -543,7 +560,8 @@ power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; clock-names = "clk_ahb", "clk_xin"; - ti,trm-icp = <0x2>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; @@ -555,8 +573,30 @@ ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; ti,itap-del-sel-sdr25 = <0x0>; - ti,clkbuf-sel = <0x7>; + no-1-8-v; + status = "disabled"; + }; + + sdhci2: mmc@fa20000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0xfa20000 0x00 0x260>, <0x00 0xfa28000 0x00 0x134>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; + clock-names = "clk_ahb", "clk_xin"; bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; no-1-8-v; status = "disabled"; }; @@ -985,4 +1025,30 @@ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + dss: dss@30200000 { + compatible = "ti,am62a7-dss"; + reg = <0x00 0x30200000 0x00 0x1000>, /* common */ + <0x00 0x30202000 0x00 0x1000>, /* vidl1 */ + <0x00 0x30206000 0x00 0x1000>, /* vid */ + <0x00 0x30207000 0x00 0x1000>, /* ovr1 */ + <0x00 0x30208000 0x00 0x1000>, /* ovr2 */ + <0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the SoC */ + <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */ + <0x00 0x30201000 0x00 0x1000>; /* common1 */ + reg-names = "common", "vidl1", "vid", + "ovr1", "ovr2", "vp1", "vp2", "common1"; + power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 186 6>, + <&k3_clks 186 0>, + <&k3_clks 186 2>; + clock-names = "fck", "vp1", "vp2"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + dss_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; diff --git a/dts/src/arm64/ti/k3-am62a-mcu.dtsi b/dts/src/arm64/ti/k3-am62a-mcu.dtsi index a6d16a9408..8c36e56f41 100644 --- a/dts/src/arm64/ti/k3-am62a-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am62a-mcu.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM625 SoC Family MCU Domain peripherals * - * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { diff --git a/dts/src/arm64/ti/k3-am62a-thermal.dtsi b/dts/src/arm64/ti/k3-am62a-thermal.dtsi index 85ce545633..c7486fb2a5 100644 --- a/dts/src/arm64/ti/k3-am62a-thermal.dtsi +++ b/dts/src/arm64/ti/k3-am62a-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-am62a-wakeup.dtsi b/dts/src/arm64/ti/k3-am62a-wakeup.dtsi index 4e8279fa01..f7bec48470 100644 --- a/dts/src/arm64/ti/k3-am62a-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am62a-wakeup.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals * - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_wakeup { diff --git a/dts/src/arm64/ti/k3-am62a.dtsi b/dts/src/arm64/ti/k3-am62a.dtsi index 61a210ecd5..b1b8846002 100644 --- a/dts/src/arm64/ti/k3-am62a.dtsi +++ b/dts/src/arm64/ti/k3-am62a.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM62A SoC Family * - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h> diff --git a/dts/src/arm64/ti/k3-am62a7-sk.dts b/dts/src/arm64/ti/k3-am62a7-sk.dts index 7b71425862..f241637a56 100644 --- a/dts/src/arm64/ti/k3-am62a7-sk.dts +++ b/dts/src/arm64/ti/k3-am62a7-sk.dts @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * AM62A SK: https://www.ti.com/lit/zip/sprr459 * - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -20,6 +20,7 @@ serial0 = &wkup_uart0; serial2 = &main_uart0; serial3 = &main_uart1; + mmc0 = &sdhci0; mmc1 = &sdhci1; }; @@ -132,6 +133,18 @@ clock-frequency = <12288000>; }; + hdmi0: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; + codec_audio: sound { compatible = "simple-audio-card"; simple-audio-card,name = "AM62Ax-SKEVM"; @@ -181,6 +194,39 @@ }; &main_pmx0 { + main_dss0_pins_default: main-dss0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x100, PIN_OUTPUT, 0) /* (V17) VOUT0_VSYNC */ + AM62AX_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (T18) VOUT0_HSYNC */ + AM62AX_IOPAD(0x104, PIN_OUTPUT, 0) /* (AA22) VOUT0_PCLK */ + AM62AX_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (U17) VOUT0_DE */ + AM62AX_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62AX_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (U21) VOUT0_DATA1 */ + AM62AX_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (U20) VOUT0_DATA2 */ + AM62AX_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (U19) VOUT0_DATA3 */ + AM62AX_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (T19) VOUT0_DATA4 */ + AM62AX_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (U18) VOUT0_DATA5 */ + AM62AX_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V22) VOUT0_DATA6 */ + AM62AX_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA7 */ + AM62AX_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V19) VOUT0_DATA8 */ + AM62AX_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (V18) VOUT0_DATA9 */ + AM62AX_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (W22) VOUT0_DATA10 */ + AM62AX_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA11 */ + AM62AX_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (W20) VOUT0_DATA12 */ + AM62AX_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (W19) VOUT0_DATA13 */ + AM62AX_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y21) VOUT0_DATA14 */ + AM62AX_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA15 */ + AM62AX_IOPAD(0x05c, PIN_OUTPUT, 1) /* (P22) GPMC0_AD8.VOUT0_DATA16 */ + AM62AX_IOPAD(0x060, PIN_OUTPUT, 1) /* (R19) GPMC0_AD9.VOUT0_DATA17 */ + AM62AX_IOPAD(0x064, PIN_OUTPUT, 1) /* (R20) GPMC0_AD10.VOUT0_DATA18 */ + AM62AX_IOPAD(0x068, PIN_OUTPUT, 1) /* (R22) GPMC0_AD11.VOUT0_DATA19 */ + AM62AX_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */ + AM62AX_IOPAD(0x070, PIN_OUTPUT, 1) /* (R21) GPMC0_AD13.VOUT0_DATA21 */ + AM62AX_IOPAD(0x074, PIN_OUTPUT, 1) /* (T20) GPMC0_AD14.VOUT0_DATA22 */ + AM62AX_IOPAD(0x078, PIN_OUTPUT, 1) /* (T21) GPMC0_AD15.VOUT0_DATA23 */ + >; + }; + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ @@ -218,6 +264,22 @@ >; }; + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */ + AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ @@ -466,6 +528,36 @@ "CSI_EN", "AUTO_100M_1000M_CONFIG", "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST"; }; + + sii9022: bridge-hdmi@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + interrupt-parent = <&exp1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 >; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi1_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &main_i2c2 { @@ -475,13 +567,21 @@ clock-frequency = <400000>; }; +&sdhci0 { + /* eMMC */ + status = "okay"; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + disable-wp; +}; + &sdhci1 { /* SD/MMC */ status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; }; @@ -583,3 +683,20 @@ tx-num-evt = <32>; rx-num-evt = <32>; }; + +&dss { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_dss0_pins_default>; +}; + +&dss_ports { + /* VP2: DPI Output */ + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; diff --git a/dts/src/arm64/ti/k3-am62a7.dtsi b/dts/src/arm64/ti/k3-am62a7.dtsi index 58f1c43edc..f86a23404e 100644 --- a/dts/src/arm64/ti/k3-am62a7.dtsi +++ b/dts/src/arm64/ti/k3-am62a7.dtsi @@ -1,10 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM62A7 SoC family in Quad core configuration * * TRM: https://www.ti.com/lit/zip/spruj16 * - * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am62p-main.dtsi b/dts/src/arm64/ti/k3-am62p-main.dtsi index 4c51bae06b..7337a9e135 100644 --- a/dts/src/arm64/ti/k3-am62p-main.dtsi +++ b/dts/src/arm64/ti/k3-am62p-main.dtsi @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree file for the AM62P main domain peripherals - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_main { @@ -158,6 +158,43 @@ }; }; + dmss_csi: bus@4e000000 { + compatible = "simple-bus"; + ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x408000>; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ti,sci-dev-id = <198>; + + inta_main_dmss_csi: interrupt-controller@4e400000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x4e400000 0x00 0x8000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <200>; + ti,interrupt-ranges = <0 237 8>; + ti,unmapped-event-sources = <&main_bcdma_csi>; + }; + + main_bcdma_csi: dma-controller@4e230000 { + compatible = "ti,am62a-dmss-bcdma-csirx"; + reg = <0x00 0x4e230000 0x00 0x100>, + <0x00 0x4e180000 0x00 0x8000>, + <0x00 0x4e100000 0x00 0x10000>; + reg-names = "gcfg", "rchanrt", "ringrt"; + #dma-cells = <3>; + msi-parent = <&inta_main_dmss_csi>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <199>; + ti,sci-rm-range-rchan = <0x21>; + }; + }; + dmsc: system-controller@44043000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; @@ -534,7 +571,21 @@ clock-names = "clk_ahb", "clk_xin"; assigned-clocks = <&k3_clks 57 2>; assigned-clock-parents = <&k3_clks 57 4>; - ti,otap-del-sel-legacy = <0x0>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + ti,clkbuf-sel = <0x7>; + ti,strobe-sel = <0x77>; + ti,trm-icp = <0x8>; + ti,otap-del-sel-legacy = <0x1>; + ti,otap-del-sel-mmc-hs = <0x1>; + ti,otap-del-sel-ddr52 = <0x6>; + ti,otap-del-sel-hs200 = <0x8>; + ti,otap-del-sel-hs400 = <0x5>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; status = "disabled"; }; @@ -545,7 +596,19 @@ power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; clock-names = "clk_ahb", "clk_xin"; - ti,otap-del-sel-legacy = <0x8>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; status = "disabled"; }; @@ -556,7 +619,19 @@ power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; clock-names = "clk_ahb", "clk_xin"; - ti,otap-del-sel-legacy = <0x8>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; status = "disabled"; }; @@ -891,4 +966,73 @@ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + ti_csi2rx0: ticsi2rx@30102000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x00 0x30102000 0x00 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_bcdma_csi 0 0x5000 0>; + dma-names = "rx0"; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@30101000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x30101000 0x00 0x1000>; + clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, + <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@30110000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x30110000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + vpu: video-codec@30210000 { + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; + reg = <0x00 0x30210000 0x00 0x10000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 204 2>; + power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>; + }; }; diff --git a/dts/src/arm64/ti/k3-am62p-mcu.dtsi b/dts/src/arm64/ti/k3-am62p-mcu.dtsi index c4b0b91d70..b973b550eb 100644 --- a/dts/src/arm64/ti/k3-am62p-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am62p-mcu.dtsi @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree file for the AM62P MCU domain peripherals - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { @@ -187,6 +187,8 @@ ranges = <0x79000000 0x00 0x79000000 0x8000>, <0x79020000 0x00 0x79020000 0x8000>; power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + mcu_r5fss0_core0: r5f@79000000 { compatible = "ti,am62-r5f"; reg = <0x79000000 0x00008000>, diff --git a/dts/src/arm64/ti/k3-am62p-thermal.dtsi b/dts/src/arm64/ti/k3-am62p-thermal.dtsi index 85ce545633..c7486fb2a5 100644 --- a/dts/src/arm64/ti/k3-am62p-thermal.dtsi +++ b/dts/src/arm64/ti/k3-am62p-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-am62p-wakeup.dtsi b/dts/src/arm64/ti/k3-am62p-wakeup.dtsi index 19f42b3939..a84756c336 100644 --- a/dts/src/arm64/ti/k3-am62p-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am62p-wakeup.dtsi @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree file for the AM62P wakeup domain peripherals - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_wakeup { @@ -78,6 +78,7 @@ ranges = <0x78000000 0x00 0x78000000 0x8000>, <0x78100000 0x00 0x78100000 0x8000>; power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; wkup_r5fss0_core0: r5f@78000000 { compatible = "ti,am62-r5f"; diff --git a/dts/src/arm64/ti/k3-am62p.dtsi b/dts/src/arm64/ti/k3-am62p.dtsi index 84ffe7b9dc..94babc4125 100644 --- a/dts/src/arm64/ti/k3-am62p.dtsi +++ b/dts/src/arm64/ti/k3-am62p.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM62P SoC Family * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h> @@ -71,7 +71,7 @@ <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ - <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ + <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */ <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ diff --git a/dts/src/arm64/ti/k3-am62p5-sk.dts b/dts/src/arm64/ti/k3-am62p5-sk.dts index 1773c05f75..e86f34e835 100644 --- a/dts/src/arm64/ti/k3-am62p5-sk.dts +++ b/dts/src/arm64/ti/k3-am62p5-sk.dts @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree file for the AM62P5-SK - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ * * Schematics: https://www.ti.com/lit/zip/sprr487 */ @@ -413,6 +413,7 @@ status = "okay"; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &sdhci1 { @@ -422,9 +423,7 @@ vqmmc-supply = <&vddshv_sdio>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; - no-1-8-v; bootph-all; }; @@ -445,6 +444,10 @@ }; &cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + status = "okay"; + cpsw3g_phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; diff --git a/dts/src/arm64/ti/k3-am62p5.dtsi b/dts/src/arm64/ti/k3-am62p5.dtsi index 50147bb63e..41f479dca4 100644 --- a/dts/src/arm64/ti/k3-am62p5.dtsi +++ b/dts/src/arm64/ti/k3-am62p5.dtsi @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree file for the AM62P5 SoC family (quad core) - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ * * TRM: https://www.ti.com/lit/pdf/spruj83 */ diff --git a/dts/src/arm64/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso b/dts/src/arm64/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso new file mode 100644 index 0000000000..f0b2fd4165 --- /dev/null +++ b/dts/src/arm64/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2024 PHYTEC America LLC + * Author: Garrett Giordano <ggiordano@phytec.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> +#include "k3-pinctrl.h" + +&{/} { + fan: gpio-fan { + compatible = "gpio-fan"; + gpio-fan,speed-map = <0 0 8600 1>; + gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_fan_pins_default>; + }; +}; + +&main_pmx0 { + gpio_fan_pins_default: gpio-fan-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0a4, PIN_OUTPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ + >; + }; +}; + +&thermal_zones { + main0_thermal: main0-thermal { + trips { + main0_thermal_trip0: main0-thermal-trip { + temperature = <65000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&main0_thermal_trip0>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; diff --git a/dts/src/arm64/ti/k3-am62x-sk-common.dtsi b/dts/src/arm64/ti/k3-am62x-sk-common.dtsi index 33768c02d8..3c45782ab2 100644 --- a/dts/src/arm64/ti/k3-am62x-sk-common.dtsi +++ b/dts/src/arm64/ti/k3-am62x-sk-common.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Common dtsi for AM62x SK and derivatives * - * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/leds/common.h> @@ -411,7 +411,6 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; }; @@ -421,7 +420,6 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; }; @@ -460,6 +458,7 @@ }; &usbss0 { + bootph-all; status = "okay"; ti,vbus-divider; }; @@ -470,6 +469,7 @@ }; &usb0 { + bootph-all; #address-cells = <1>; #size-cells = <0>; usb-role-switch; diff --git a/dts/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso b/dts/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso index 6f4cd73c2f..76ca02127f 100644 --- a/dts/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso +++ b/dts/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * IMX219 (RPi v2) Camera Module - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso b/dts/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso index 9323a4b383..ccc7f5e431 100644 --- a/dts/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso +++ b/dts/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module - * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/dts/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso index dcaa33a4c8..4eaf9d757d 100644 --- a/dts/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso +++ b/dts/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Technexion TEVI-OV5640-*-RPI - OV5640 camera module - * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso b/dts/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso index 43a0ddc123..18c3082f68 100644 --- a/dts/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso +++ b/dts/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * Audio playback via HDMI for AM625-SK and AM62-LP SK. * @@ -6,7 +6,7 @@ * AM625 SK: https://www.ti.com/tool/SK-AM62 * AM62-LP SK: https://www.ti.com/tool/SK-AM62-LP * - * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am64-main.dtsi b/dts/src/arm64/ti/k3-am64-main.dtsi index e348114f42..6f9aa5e021 100644 --- a/dts/src/arm64/ti/k3-am64-main.dtsi +++ b/dts/src/arm64/ti/k3-am64-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM642 SoC Family Main Domain peripherals * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/phy/phy-cadence.h> @@ -51,10 +51,11 @@ reg = <0x00000014 0x4>; }; - serdes_ln_ctrl: mux-controller { - compatible = "mmio-mux"; + serdes_ln_ctrl: mux-controller@4080 { + compatible = "reg-mux"; + reg = <0x4080 0x4>; #mux-control-cells = <1>; - mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */ + mux-reg-masks = <0x0 0x3>; /* SERDES0 lane0 select */ }; phy_gmii_sel: phy@4044 { @@ -626,13 +627,18 @@ power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 57 0>, <&k3_clks 57 1>; clock-names = "clk_ahb", "clk_xin"; + bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x2>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-ddr52 = <0x6>; ti,otap-del-sel-hs200 = <0x7>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; status = "disabled"; }; @@ -643,15 +649,19 @@ power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 58 3>, <&k3_clks 58 4>; clock-names = "clk_ahb", "clk_xin"; - ti,trm-icp = <0x2>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; ti,otap-del-sel-sdr104 = <0x6>; ti,otap-del-sel-ddr50 = <0x9>; - ti,clkbuf-sel = <0x7>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; status = "disabled"; }; @@ -1041,25 +1051,6 @@ status = "disabled"; }; - pcie0_ep: pcie-ep@f102000 { - compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep"; - reg = <0x00 0x0f102000 0x00 0x1000>, - <0x00 0x0f100000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x68000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&main_conf 0x4070>; - max-link-speed = <2>; - num-lanes = <1>; - power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 114 0>; - clock-names = "fck"; - max-functions = /bits/ 8 <1>; - status = "disabled"; - }; - epwm0: pwm@23000000 { compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; @@ -1244,6 +1235,18 @@ }; }; + icssg0_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; + + icssg0_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; + icssg0_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1385,6 +1388,18 @@ }; }; + icssg1_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg1_iepclk_mux>; + }; + + icssg1_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg1_iepclk_mux>; + }; + icssg1_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; diff --git a/dts/src/arm64/ti/k3-am64-mcu.dtsi b/dts/src/arm64/ti/k3-am64-mcu.dtsi index b9508072be..ec17285869 100644 --- a/dts/src/arm64/ti/k3-am64-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am64-mcu.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM64 SoC Family MCU Domain peripherals * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { diff --git a/dts/src/arm64/ti/k3-am64-phycore-som.dtsi b/dts/src/arm64/ti/k3-am64-phycore-som.dtsi index 1678e74cb7..125e507966 100644 --- a/dts/src/arm64/ti/k3-am64-phycore-som.dtsi +++ b/dts/src/arm64/ti/k3-am64-phycore-som.dtsi @@ -1,9 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com + * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com * Author: Matt McKee <mmckee@phytec.com> * - * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> * * Product homepage: @@ -318,3 +318,10 @@ disable-wp; keep-power-in-suspend; }; + +&tscadc0 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/dts/src/arm64/ti/k3-am64-thermal.dtsi b/dts/src/arm64/ti/k3-am64-thermal.dtsi index 036db56ba7..b1cd554242 100644 --- a/dts/src/arm64/ti/k3-am64-thermal.dtsi +++ b/dts/src/arm64/ti/k3-am64-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-am64.dtsi b/dts/src/arm64/ti/k3-am64.dtsi index 0187c42aed..74e56cc68d 100644 --- a/dts/src/arm64/ti/k3-am64.dtsi +++ b/dts/src/arm64/ti/k3-am64.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM642 SoC Family * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h> diff --git a/dts/src/arm64/ti/k3-am642-evm-icssg1-dualemac.dtso b/dts/src/arm64/ti/k3-am642-evm-icssg1-dualemac.dtso new file mode 100644 index 0000000000..af2fd3e744 --- /dev/null +++ b/dts/src/arm64/ti/k3-am642-evm-icssg1-dualemac.dtso @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT overlay for enabling 2nd ICSSG1 port on AM642 EVM + * + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/icssg1-eth/ethernet-ports/port@1"; + }; + + mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mdio_mux>; + mdio-parent-bus = <&icssg1_mdio>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + icssg1_phy2: ethernet-phy@3 { + reg = <3>; + tx-internal-delay-ps = <250>; + rx-internal-delay-ps = <2000>; + }; + }; + }; +}; + +&main_pmx0 { + icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ + AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ + AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ + AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ + AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ + AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ + AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ + AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ + AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ + AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ + AM64X_IOPAD(0x0148, PIN_OUTPUT, 2) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ + AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ + >; + }; +}; + +&cpsw3g { + pinctrl-0 = <&rgmii1_pins_default>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&mdio_mux_1 { + status = "disabled"; +}; + +&icssg1_eth { + pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>; +}; + +&icssg1_emac1 { + status = "okay"; + phy-handle = <&icssg1_phy2>; + phy-mode = "rgmii-id"; +}; diff --git a/dts/src/arm64/ti/k3-am642-evm.dts b/dts/src/arm64/ti/k3-am642-evm.dts index 8c5651d2cf..53fe1d065d 100644 --- a/dts/src/arm64/ti/k3-am642-evm.dts +++ b/dts/src/arm64/ti/k3-am642-evm.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -32,6 +32,7 @@ mmc1 = &sdhci1; ethernet0 = &cpsw_port1; ethernet1 = &cpsw_port2; + ethernet2 = &icssg1_emac0; }; memory@80000000 { @@ -198,7 +199,7 @@ mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; }; - mdio-mux-1 { + mdio_mux_1: mdio-mux-1 { compatible = "mdio-mux-multiplexer"; mux-controls = <&mdio_mux>; mdio-parent-bus = <&cpsw3g_mdio>; @@ -229,6 +230,64 @@ max-bitrate = <5000000>; standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; }; + + icssg1_eth: icssg1-eth { + compatible = "ti,am642-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg1_rgmii1_pins_default>; + sram = <&oc_sram>; + ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; + firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am64x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf"; + + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + ti,mii-g-rt = <&icssg1_mii_g_rt>; + ti,mii-rt = <&icssg1_mii_rt>; + ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; + interrupt-parent = <&icssg1_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */ + <&main_pktdma 0xc201 15>, /* egress slice 0 */ + <&main_pktdma 0xc202 15>, /* egress slice 0 */ + <&main_pktdma 0xc203 15>, /* egress slice 0 */ + <&main_pktdma 0xc204 15>, /* egress slice 1 */ + <&main_pktdma 0xc205 15>, /* egress slice 1 */ + <&main_pktdma 0xc206 15>, /* egress slice 1 */ + <&main_pktdma 0xc207 15>, /* egress slice 1 */ + <&main_pktdma 0x4200 15>, /* ingress slice 0 */ + <&main_pktdma 0x4201 15>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg1_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg1_phy1>; + phy-mode = "rgmii-id"; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + icssg1_emac1: port@1 { + reg = <1>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + }; + }; }; &main_pmx0 { @@ -383,6 +442,30 @@ AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ >; }; + + icssg1_mdio1_pins_default: icssg1-mdio1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */ + AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA6) PRG1_MDIO0_MDIO */ + >; + }; + + icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins{ + pinctrl-single,pins = < + AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */ + AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */ + AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */ + AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */ + AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */ + AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */ + AM64X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */ + AM64X_IOPAD(0x00e8, PIN_INPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */ + AM64X_IOPAD(0x00ec, PIN_INPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */ + AM64X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */ + AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */ + AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */ + >; + }; }; &main_uart0 { @@ -494,10 +577,10 @@ /* eMMC */ &sdhci0 { status = "okay"; - bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; /* SD/MMC */ @@ -506,9 +589,7 @@ status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; - bus-width = <4>; pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; }; @@ -660,25 +741,25 @@ }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; @@ -705,12 +786,6 @@ num-lanes = <1>; }; -&pcie0_ep { - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; -}; - &ecap0 { status = "okay"; /* PWM is available on Pin 1 of header J12 */ @@ -731,3 +806,15 @@ pinctrl-0 = <&main_mcan1_pins_default>; phys = <&transceiver2>; }; + +&icssg1_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg1_mdio1_pins_default>; + + icssg1_phy1: ethernet-phy@f { + reg = <0xf>; + tx-internal-delay-ps = <250>; + rx-internal-delay-ps = <2000>; + }; +}; diff --git a/dts/src/arm64/ti/k3-am642-hummingboard-t-pcie.dtso b/dts/src/arm64/ti/k3-am642-hummingboard-t-pcie.dtso new file mode 100644 index 0000000000..bd9a5caf20 --- /dev/null +++ b/dts/src/arm64/ti/k3-am642-hummingboard-t-pcie.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Josua Mayer <josua@solid-run.com> + * + * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +#include "k3-serdes.h" + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_pins>; + reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; + status = "okay"; +}; + +&serdes0 { + #address-cells = <1>; + #size-cells = <0>; + + serdes0_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_PCIE0>; +}; + +&serdes_mux { + idle-state = <1>; +}; diff --git a/dts/src/arm64/ti/k3-am642-hummingboard-t-usb3.dtso b/dts/src/arm64/ti/k3-am642-hummingboard-t-usb3.dtso new file mode 100644 index 0000000000..ffcc3bd3c7 --- /dev/null +++ b/dts/src/arm64/ti/k3-am642-hummingboard-t-usb3.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Josua Mayer <josua@solid-run.com> + * + * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/phy/phy.h> + +#include "k3-serdes.h" + +&serdes0 { + #address-cells = <1>; + #size-cells = <0>; + + serdes0_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_USB3>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_USB>; +}; + +&serdes_mux { + idle-state = <0>; +}; + +&usbss0 { + /delete-property/ ti,usb2-only; +}; + +&usb0 { + maximum-speed = "super-speed"; + phys = <&serdes0_link>; + phy-names = "cdns3,usb3-phy"; +}; diff --git a/dts/src/arm64/ti/k3-am642-hummingboard-t.dts b/dts/src/arm64/ti/k3-am642-hummingboard-t.dts new file mode 100644 index 0000000000..234d76e4e9 --- /dev/null +++ b/dts/src/arm64/ti/k3-am642-hummingboard-t.dts @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Josua Mayer <josua@solid-run.com> + * + * DTS for SolidRun AM642 HummingBoard-T, + * running on Cortex A53. + * + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy.h> + +#include "k3-am642.dtsi" +#include "k3-am642-sr-som.dtsi" + +/ { + model = "SolidRun AM642 HummingBoard-T"; + compatible = "solidrun,am642-hummingboard-t", "solidrun,am642-sr-som", "ti,am642"; + + aliases { + serial5 = &main_uart3; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_default_pins>; + + /* D24 */ + led1: led-1 { + label = "led1"; + gpios = <&main_gpio0 29 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + /* D25 */ + led2: led-2 { + label = "led2"; + gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + /* D26 */ + led3: led-3 { + label = "led3"; + gpios = <&main_gpio0 33 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + regulator-m2-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®ulator_pcie_3v3_default_pins>; + regulator-name = "m2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&main_gpio1 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-vpp-1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®ulator_vpp_1v8_default_pins>; + regulator-name = "vpp-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&main_gpio1 78 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + serdes_mux: mux-controller { + compatible = "gpio-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&serdes_mux_default_pins>; + #mux-control-cells = <0>; + /* + * Mux has 2 IOs: + * - select: 0 = USB-3 (M2); 1 = PCIE (M1) + * - shutdown: 0 = active; 1 = disabled (high impedance) + */ + mux-gpios = <&main_gpio1 40 GPIO_ACTIVE_HIGH>, <&main_gpio1 41 GPIO_ACTIVE_HIGH>; + /* default disabled */ + idle-state = <2>; + }; +}; + +&main_gpio0 { + m2-reset-hog { + gpio-hog; + gpios = <12 GPIO_ACTIVE_LOW>; + output-low; /* deasserted */ + line-name = "m2-reset"; + }; + + m1-m2-w-disable1-hog { + gpio-hog; + gpios = <32 GPIO_ACTIVE_LOW>; + output-low; /* deasserted */ + line-name = "m1-m2-pcie-w-disable1"; + }; + + m1-m2-w-disable2-hog { + gpio-hog; + gpios = <34 GPIO_ACTIVE_LOW>; + output-low; /* deasserted */ + line-name = "m1-m2-pcie-w-disable2"; + }; +}; + +&main_gpio1 { + m1-pcie-clkreq0-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_LOW>; + input; + line-name = "m1-pcie-clkreq0"; + }; + + m2-pcie-clkreq-hog { + gpio-hog; + gpios = <35 GPIO_ACTIVE_LOW>; + input; + line-name = "m2-pcie-clkreq"; + }; +}; + +&main_i2c0 { + pinctrl-0 = <&main_i2c0_default_pins>, <&main_i2c0_int_default_pins>; + + humidity-sensor@41 { + compatible = "ti,hdc2010"; + reg = <0x41>; + interrupt-parent = <&main_gpio0>; + interrupts = <37 IRQ_TYPE_EDGE_FALLING>; + }; + + light-sensor@44 { + compatible = "ti,opt3001"; + reg = <0x44>; + interrupt-parent = <&main_gpio0>; + interrupts = <37 IRQ_TYPE_EDGE_FALLING>; + }; + + /* charger@6a */ +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_default_pins>; + status = "okay"; + + rtc@69 { + compatible = "abracon,abx80x"; + reg = <0x69>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int_default_pins>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + interrupt-parent = <&main_gpio0>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_default_pins>; + status = "okay"; + + can-transceiver { + max-bitrate = <8000000>; + }; +}; + +&main_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan1_default_pins>; + status = "okay"; + + can-transceiver { + max-bitrate = <8000000>; + }; +}; + +&main_pmx0 { + leds_default_pins: leds-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0074, PIN_OUTPUT, 7) /* GPMC0_AD14.GPIO0_29 */ + AM64X_IOPAD(0x0078, PIN_OUTPUT, 7) /* GPMC0_AD15.GPIO0_30 */ + AM64X_IOPAD(0x0088, PIN_OUTPUT, 7) /* GPMC0_OEn_REn.GPIO0_33 */ + >; + }; + + main_i2c0_int_default_pins: main-i2c0-int-default-pins { + pinctrl-single,pins = < + /* external pull-up on Carrier */ + AM64X_IOPAD(0x0098, PIN_INPUT, 7) /* GPMC0_WAIT0.GPIO0_37 */ + >; + }; + + main_i2c1_default_pins: main-i2c1-default-pins { + pinctrl-single,pins = < + /* external pull-up on SoM */ + AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* I2C1_SCL.I2C1_SCL */ + AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* I2C1_SDA.I2C1_SDA */ + >; + }; + + main_mcan0_default_pins: main-mcan0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* MCAN0_RX.MCAN0_RX */ + AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* MCAN0_TX.MCAN0_TX */ + >; + }; + + main_mcan1_default_pins: main-mcan1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* MCAN1_RX.MCAN1_RX */ + AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* MCAN1_TX.MCAN1_TX */ + >; + }; + + main_uart3_default_pins: main-uart3-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x016c, PIN_INPUT, 10) /* PRG0_PRU0_GPO3.UART3_CTSn */ + AM64X_IOPAD(0x0170, PIN_OUTPUT, 10) /* PRG0_PRU0_GPO4.UART3_TXD */ + AM64X_IOPAD(0x0174, PIN_OUTPUT, 10) /* PRG0_PRU0_GPO5.UART3_RTSn */ + AM64X_IOPAD(0x01ac, PIN_INPUT, 10) /* PRG0_PRU0_GPO19.UART3_RXD */ + >; + }; + + pcie0_default_pins: pcie0-default-pins { + pinctrl-single,pins = < + /* connector M2 RESET */ + AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* OSPI0_CSn1.GPIO0_12 */ + /* connectors M1 & M2 W_DISABLE1 */ + AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* GPMC0_ADVN_ALE.GPIO0_32 */ + /* connectors M1 & M2 W_DISABLE2 */ + AM64X_IOPAD(0x008c, PIN_OUTPUT, 7) /* GPMC0_WEN.GPIO0_34 */ + /* connectors M1 & M2 PERST0 (PCI Reset) */ + AM64X_IOPAD(0x019c, PIN_OUTPUT, 7) /* PRG0_PRU0_GPO15.GPIO1_15 */ + /* connector M1 CLKREQ0 */ + AM64X_IOPAD(0x018c, PIN_INPUT, 7) /* PRG0_PRU0_GPO11.GPIO1_11 */ + /* connector M2 CLKREQ0 */ + AM64X_IOPAD(0x01ec, PIN_INPUT, 7) /* PRG0_PRU1_GPO15.GPIO1_35 */ + >; + }; + + regulator_pcie_3v3_default_pins: regulator-pcie-3v3-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x01a4, PIN_OUTPUT, 7) /* PRG0_PRU0_GPO17.GPIO1_17 */ + >; + }; + + regulator_vpp_1v8_default_pins: regulator-vpp-1v8-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x029c, PIN_OUTPUT, 7) /* MMC1_SDWP.GPIO1_78 */ + >; + }; + + rtc_int_default_pins: rtc-int-default-pins { + pinctrl-single,pins = < + /* external pull-up on Carrier */ + AM64X_IOPAD(0x00b4, PIN_INPUT, 7) /* GPMC0_CSn3.GPIO0_44 */ + >; + }; + + serdes_mux_default_pins: serdes-mux-default-pins { + pinctrl-single,pins = < + /* SEL, 10k pull-down on carrier, 2.2k pullup on SoM */ + AM64X_IOPAD(0x0200, PIN_OUTPUT, 7) /* PRG0_MDIO0_MDIO.GPIO1_40 */ + /* EN */ + AM64X_IOPAD(0x0204, PIN_OUTPUT, 7) /* PRG0_MDIO0_MDC.GPIO1_41 */ + >; + }; +}; + +&main_uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart3_default_pins>; + uart-has-rtscts; + rs485-rts-active-low; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; +}; diff --git a/dts/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts b/dts/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts index 53b64e5541..8237b8c815 100644 --- a/dts/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts +++ b/dts/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts @@ -1,9 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com + * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com * Author: Matt McKee <mmckee@phytec.com> * - * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> * * Product homepage: @@ -159,6 +159,15 @@ >; }; + main_spi0_pins_default: main-spi0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x020c, PIN_OUTPUT, 7) /* (C13) SPI0_CS1.GPIO1_43 */ + AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ + AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ + AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ + >; + }; + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ @@ -248,6 +257,20 @@ phys = <&can_tc2>; }; +&main_spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_spi0_pins_default>; + cs-gpios = <0>, <&main_gpio1 43 GPIO_ACTIVE_LOW>; + ti,pindir-d0-out-d1-in; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + spi-max-frequency = <10000000>; + }; +}; + &main_uart0 { status = "okay"; pinctrl-names = "default"; @@ -269,7 +292,6 @@ pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; bus-width = <4>; - ti,driver-strength-ohm = <50>; disable-wp; no-1-8-v; }; diff --git a/dts/src/arm64/ti/k3-am642-sk.dts b/dts/src/arm64/ti/k3-am642-sk.dts index 1dddd6fc1a..67cd41bf80 100644 --- a/dts/src/arm64/ti/k3-am642-sk.dts +++ b/dts/src/arm64/ti/k3-am642-sk.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -469,9 +469,7 @@ status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; - bus-width = <4>; pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; }; @@ -646,25 +644,25 @@ }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; diff --git a/dts/src/arm64/ti/k3-am642-sr-som.dtsi b/dts/src/arm64/ti/k3-am642-sr-som.dtsi new file mode 100644 index 0000000000..c19d0b8bbf --- /dev/null +++ b/dts/src/arm64/ti/k3-am642-sr-som.dtsi @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Josua Mayer <josua@solid-run.com> + * + */ + +#include <dt-bindings/net/ti-dp83869.h> + +/ { + model = "SolidRun AM642 SoM"; + compatible = "solidrun,am642-sr-som", "ti,am642"; + + aliases { + ethernet0 = &cpsw_port1; + ethernet1 = &icssg1_emac0; + ethernet2 = &icssg1_emac1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + serial2 = &main_uart0; + }; + + chosen { + /* SoC default UART console */ + stdout-path = "serial2:115200n8"; + }; + + /* PRU Ethernet Controller */ + ethernet { + compatible = "ti,am642-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&pru_rgmii1_default_pins>, <&pru_rgmii2_default_pins>; + + sram = <&oc_sram>; + ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + /* configure internal pinmux for mii mode */ + ti,pruss-gp-mux-sel = <2>, <2>, <2>, <2>, <2>, <2>; + + ti,mii-g-rt = <&icssg1_mii_g_rt>; + ti,mii-rt = <&icssg1_mii_rt>; + ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; + + /* + * Configure icssg interrupt controller to map pru-internal + * interrupts 8/9 via channels 0/1 to host interrupts 0/1. + * + * For details see interrupt controller documentation: + * Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml + */ + interrupt-parent = <&icssg1_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */ + <&main_pktdma 0xc201 15>, /* egress slice 0 */ + <&main_pktdma 0xc202 15>, /* egress slice 0 */ + <&main_pktdma 0xc203 15>, /* egress slice 0 */ + <&main_pktdma 0xc204 15>, /* egress slice 1 */ + <&main_pktdma 0xc205 15>, /* egress slice 1 */ + <&main_pktdma 0xc206 15>, /* egress slice 1 */ + <&main_pktdma 0xc207 15>, /* egress slice 1 */ + <&main_pktdma 0x4200 15>, /* ingress slice 0 */ + <&main_pktdma 0x4201 15>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + icssg1_emac0: port@0 { + reg = <0>; + ti,syscon-rgmii-delay = <&main_conf 0x4110>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðernet_phy2>; + phy-mode = "rgmii-id"; + }; + + icssg1_emac1: port@1 { + reg = <1>; + ti,syscon-rgmii-delay = <&main_conf 0x4114>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðernet_phy1>; + phy-mode = "rgmii-id"; + }; + }; + }; + + /* DDR16SS0: + * - Bank 1 @ 0x080000000-0x0FFFFFFFF: max. 2GB in 32-bit address space + * - Bank 2 @ 0x880000000-0x9FFFFFFFF: max. 6GB in 64-bit address space + */ + memory@80000000 { + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000001 0x80000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + }; + + vdd_mmc0: regulator-vdd-mmc0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-mmc0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_default_pins>; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_default_pins>; + status = "okay"; + + ethernet_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.a0f1"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_phy0_default_pins>; + ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>; + ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>; + /* + * Disable interrupts because ISR never clears 0x0040 + * + * interrupt-parent = <&main_gpio1>; + * interrupts = <70 IRQ_TYPE_LEVEL_LOW>; + */ + /* + * Disable HW Reset because clock signal is daisy-chained + * + * reset-gpios = <&main_gpio0 84 GPIO_ACTIVE_LOW>; + * reset-assert-us = <1>; + * reset-deassert-us = <30>; + */ + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy0>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&icssg1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&pru1_mdio0_default_pins>; + status = "okay"; + + ethernet_phy1: ethernet-phy@3 { + compatible = "ethernet-phy-id2000.a0f1"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_phy1_default_pins>; + ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>; + ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>; + /* + * Disable interrupts because ISR never clears 0x0040 + * + * interrupt-parent = <&main_gpio1>; + * interrupts = <70 IRQ_TYPE_LEVEL_LOW>; + */ + /* + * Disable HW Reset because clock signal is daisy-chained + * + * reset-gpios = <&main_gpio0 20 GPIO_ACTIVE_LOW>; + * reset-assert-us = <1>; + * reset-deassert-us = <30>; + */ + }; + + ethernet_phy2: ethernet-phy@f { + compatible = "ethernet-phy-id2000.a0f1"; + reg = <0xf>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_phy2_default_pins>; + ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>; + /* + * Disable interrupts because ISR never clears 0x0040 + * + * interrupt-parent = <&main_gpio1>; + * interrupts = <70 IRQ_TYPE_LEVEL_LOW>; + */ + /* + * Disable HW Reset because clock signal is daisy-chained + * + * reset-gpios = <&main_gpio0 52 GPIO_ACTIVE_LOW>; + * reset-assert-us = <1>; + * reset-deassert-us = <30>; + */ + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_default_pins>; + status = "okay"; + + som_eeprom: eeprom@50 { + compatible = "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&main_pmx0 { + /* hog global functions */ + pinctrl-names = "default"; + pinctrl-0 = <ðernet_phy_default_pins>; + + ethernet_phy_default_pins: ethernet-phy-default-pins { + pinctrl-single,pins = < + /* interrupt / power-down, external pull-up on SoM */ + AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* EXTINTn.GPIO1_70 */ + >; + }; + + ethernet_phy0_default_pins: ethernet-phy0-default-pins { + pinctrl-single,pins = < + /* reset */ + AM64X_IOPAD(0x0154, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO19.GPIO0_84 */ + /* reference clock */ + AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* EXT_REFCLK1.CLKOUT0 */ + >; + }; + + ethernet_phy1_default_pins: ethernet-phy1-default-pins { + pinctrl-single,pins = < + /* reset */ + AM64X_IOPAD(0x0150, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO18.GPIO0_20 */ + /* led0, external pull-down on SoM */ + AM64X_IOPAD(0x0128, PIN_INPUT, 7) /* PRG1_PRU1_GPO8.GPIO0_73 */ + /* led1/rxer */ + AM64X_IOPAD(0x011c, PIN_INPUT, 7) /* PRG1_PRU1_GPO5.GPIO0_70 */ + >; + }; + + ethernet_phy2_default_pins: ethernet-phy2-default-pins { + pinctrl-single,pins = < + /* reset */ + AM64X_IOPAD(0x00d4, PIN_OUTPUT, 7) /* PRG1_PRU0_GPO7.GPIO0_52 */ + /* led0, external pull-down on SoM */ + AM64X_IOPAD(0x00d8, PIN_INPUT, 7) /* PRG1_PRU0_GPO8.GPIO0_53 */ + /* led1/rxer */ + AM64X_IOPAD(0x00cc, PIN_INPUT, 7) /* PRG1_PRU0_GPO5.GPIO0_50 */ + >; + }; + + main_i2c0_default_pins: main-i2c0-default-pins { + pinctrl-single,pins = < + /* external pull-up on SoM */ + AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* I2C0_SCL.I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* I2C0_SDA.I2C0_SDA */ + >; + }; + + /* + * main_mmc0_default_pins: main-mmc0-default-pins + * + * MMC0_CMD: no padconfig + * MMC0_CLK: no padconfig, external pull-up on SoM + * MMC0_DAT0: no padconfig + * MMC0_DAT1: no padconfig + * MMC0_DAT2: no padconfig + * MMC0_DAT3: no padconfig + * MMC0_DAT4: no padconfig + * MMC0_DAT5: no padconfig + * MMC0_DAT6: no padconfig + * MMC0_DAT7: no padconfig + * MMC0_DS: no padconfig, external pull-down on SoM + */ + + main_mmc1_default_pins: main-mmc1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ + AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* MMC1_CLK.MMC1_CLK */ + AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* MMC1_DAT0.MMC1_DAT0 */ + AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* MMC1_DAT1.MMC1_DAT1 */ + AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* MMC1_DAT2.MMC1_DAT2 */ + AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* MMC1_DAT3.MMC1_DAT3 */ + /* external pull-down on SoM & Carrier */ + AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* MMC1_SDCD.MMC1_SDCD */ + AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB: clock loopback */ + >; + }; + + main_uart0_default_pins: main-uart0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* UART0_RXD.UART0_RXD */ + AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* UART0_TXD.UART0_TXD */ + >; + }; + + mdio0_default_pins: mdio0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* PRG0_PRU1_GPO19.MDIO0_MDC */ + AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* PRG0_PRU1_GPO18.MDIO0_MDIO */ + >; + }; + + ospi0_default_pins: ospi0-default-pins { + pinctrl-single,pins = < + /* external pull-down on SoM */ + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* OSPI0_CLK.OSPI0_CLK */ + AM64X_IOPAD(0x0008, PIN_OUTPUT, 0) /* OSPI0_DQS.OSPI0_DQS */ + /* external pull-up on SoM */ + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* OSPI0_CSn0.OSPI0_CSn0 */ + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* OSPI0_D0.OSPI0_D0 */ + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* OSPI0_D1.OSPI0_D1 */ + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* OSPI0_D2.OSPI0_D2 */ + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* OSPI0_D3.OSPI0_D3 */ + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* OSPI0_D4.OSPI0_D4 */ + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* OSPI0_D5.OSPI0_D5 */ + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* OSPI0_D6.OSPI0_D6 */ + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* OSPI0_D7.OSPI0_D7 */ + >; + }; + + ospi0_flash0_default_pins: ospi0-flash0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0034, PIN_OUTPUT, 7) /* OSPI0_CSn2.GPIO0_13 */ + AM64X_IOPAD(0x0038, PIN_INPUT, 7) /* OSPI0_CSn3.GPIO0_14 */ + >; + }; + + pru1_mdio0_default_pins: pru1-mdio0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* PRG1_MDIO0_MDC.PRG1_MDIO0_MDC */ + AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* PRG1_MDIO0_MDIO.PRG1_MDIO0_MDIO */ + >; + }; + + pru_rgmii1_default_pins: pru-rgmii1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */ + AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */ + AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */ + AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */ + AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */ + AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */ + AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */ + AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */ + AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */ + AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */ + AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */ + AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */ + >; + }; + + pru_rgmii2_default_pins: pru-rgmii2-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* PRG1_PRU1_GPO0.RGMII2_RD0 */ + AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* PRG1_PRU1_GPO1.RGMII2_RD1 */ + AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* PRG1_PRU1_GPO2.RGMII2_RD2 */ + AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* PRG1_PRU1_GPO3.RGMII2_RD3 */ + AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* PRG1_PRU1_GPO6.RGMII2_RXC */ + AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* PRG1_PRU1_GPO4.RGMII2_RX_CTL */ + AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO11.RGMII2_TD0 */ + AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO12.RGMII2_TD1 */ + AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO13.RGMII2_TD2 */ + AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO14.RGMII2_TD3 */ + AM64X_IOPAD(0x0148, PIN_INPUT, 2) /* PRG1_PRU1_GPO16.RGMII2_TXC */ + AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO15.RGMII2_TX_CTL */ + >; + }; + + rgmii1_default_pins: rgmii1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* PRG0_PRU1_GPO7.RGMII1_RD0 */ + AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* PRG0_PRU1_GPO9.RGMII1_RD1 */ + AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* PRG0_PRU1_GPO10.RGMII1_RD2 */ + AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* PRG0_PRU1_GPO17.RGMII1_RD3 */ + AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* PRG0_PRU0_GPO10.RGMII1_RXC */ + AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* PRG0_PRU0_GPO9.RGMII1_RX_CTL */ + AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO7.RGMII1_TD0 */ + AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO9.RGMII1_TD1 */ + AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO10.RGMII1_TD2 */ + AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO17.RGMII1_TD3 */ + AM64X_IOPAD(0x00e0, PIN_INPUT, 4) /* PRG1_PRU0_GPO10.RGMII1_TXC */ + AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* PRG1_PRU0_GPO9.RGMII1_TX_CTL */ + >; + }; + + usb0_default_pins: usb0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* USB0_DRVVBUS.USB0_DRVVBUS */ + >; + }; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +/* SoC default UART console */ +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_default_pins>; + status = "okay"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_default_pins>; + num-cs = <1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_flash0_default_pins>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <200000000>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + cdns,read-delay = <0>; + interrupt-parent = <&main_gpio0>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&main_gpio0 13 GPIO_ACTIVE_LOW>; + }; +}; + +&sdhci0 { + /* mmc0 pins have no padconfig */ + bus-width = <8>; + ti,driver-strength-ohm = <50>; + disable-wp; + non-removable; + cap-mmc-hw-reset; + no-sd; + /* + * MMC controller supports switching between 1.8V and 3.3V signalling. + * However MMC0 (unlike MMC1) does not integrate an LDO. + * Explicitly link a regulator node for indicating to the driver which + * voltages are actually usable. + */ + vqmmc-supply = <&vdd_mmc0>; + status = "okay"; +}; + +/* + * microSD is on carrier - however since SoC can boot from it, + * configure it just in case. + */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_default_pins>; + bus-width = <4>; + ti,driver-strength-ohm = <50>; + disable-wp; + status = "okay"; +}; + +/* + * USB settings are a carrier choice - however since SoC can boot from it, + * configure as USB-2.0 OTG here, keeping USB-3 serdes disabled. + */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_default_pins>; + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&usbss0 { + ti,vbus-divider; + ti,usb2-only; +}; diff --git a/dts/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/dts/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts index 55102d35ce..1f4dc5ad16 100644 --- a/dts/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts +++ b/dts/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts @@ -422,7 +422,6 @@ cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>; disable-wp; no-mmc; - ti,driver-strength-ohm = <50>; ti,fails-without-test-cd; /* Enabled by overlay */ }; diff --git a/dts/src/arm64/ti/k3-am642.dtsi b/dts/src/arm64/ti/k3-am642.dtsi index 7a6eedea3a..8589ee55ef 100644 --- a/dts/src/arm64/ti/k3-am642.dtsi +++ b/dts/src/arm64/ti/k3-am642.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM642 SoC family in Dual core configuration * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am65-iot2050-arduino-connector.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-arduino-connector.dtsi new file mode 100644 index 0000000000..7ff0abd7c6 --- /dev/null +++ b/dts/src/arm64/ti/k3-am65-iot2050-arduino-connector.dtsi @@ -0,0 +1,768 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Siemens AG, 2018-2023 + * + * Authors: + * Le Jin <le.jin@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * + * Common bits for IOT2050 variants with Arduino connector + */ + +&wkup_pmx0 { + pinctrl-names = + "default", + "d0-uart0-rxd", "d0-gpio", "d0-gpio-pullup", "d0-gpio-pulldown", + "d1-uart0-txd", "d1-gpio", "d1-gpio-pullup", "d1-gpio-pulldown", + "d2-uart0-ctsn", "d2-gpio", "d2-gpio-pullup", "d2-gpio-pulldown", + "d3-uart0-rtsn", "d3-gpio", "d3-gpio-pullup", "d3-gpio-pulldown", + "d10-spi0-cs0", "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown", + "d11-spi0-d0", "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown", + "d12-spi0-d1", "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown", + "d13-spi0-clk", "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown", + "a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown", + "a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown", + "a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown", + "a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown", + "a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown", + "a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown"; + + pinctrl-0 = <&d0_uart0_rxd>; + pinctrl-1 = <&d0_uart0_rxd>; + pinctrl-2 = <&d0_gpio>; + pinctrl-3 = <&d0_gpio_pullup>; + pinctrl-4 = <&d0_gpio_pulldown>; + pinctrl-5 = <&d1_uart0_txd>; + pinctrl-6 = <&d1_gpio>; + pinctrl-7 = <&d1_gpio_pullup>; + pinctrl-8 = <&d1_gpio_pulldown>; + pinctrl-9 = <&d2_uart0_ctsn>; + pinctrl-10 = <&d2_gpio>; + pinctrl-11 = <&d2_gpio_pullup>; + pinctrl-12 = <&d2_gpio_pulldown>; + pinctrl-13 = <&d3_uart0_rtsn>; + pinctrl-14 = <&d3_gpio>; + pinctrl-15 = <&d3_gpio_pullup>; + pinctrl-16 = <&d3_gpio_pulldown>; + pinctrl-17 = <&d10_spi0_cs0>; + pinctrl-18 = <&d10_gpio>; + pinctrl-19 = <&d10_gpio_pullup>; + pinctrl-20 = <&d10_gpio_pulldown>; + pinctrl-21 = <&d11_spi0_d0>; + pinctrl-22 = <&d11_gpio>; + pinctrl-23 = <&d11_gpio_pullup>; + pinctrl-24 = <&d11_gpio_pulldown>; + pinctrl-25 = <&d12_spi0_d1>; + pinctrl-26 = <&d12_gpio>; + pinctrl-27 = <&d12_gpio_pullup>; + pinctrl-28 = <&d12_gpio_pulldown>; + pinctrl-29 = <&d13_spi0_clk>; + pinctrl-30 = <&d13_gpio>; + pinctrl-31 = <&d13_gpio_pullup>; + pinctrl-32 = <&d13_gpio_pulldown>; + pinctrl-33 = <&a0_gpio>; + pinctrl-34 = <&a0_gpio_pullup>; + pinctrl-35 = <&a0_gpio_pulldown>; + pinctrl-36 = <&a1_gpio>; + pinctrl-37 = <&a1_gpio_pullup>; + pinctrl-38 = <&a1_gpio_pulldown>; + pinctrl-39 = <&a2_gpio>; + pinctrl-40 = <&a2_gpio_pullup>; + pinctrl-41 = <&a2_gpio_pulldown>; + pinctrl-42 = <&a3_gpio>; + pinctrl-43 = <&a3_gpio_pullup>; + pinctrl-44 = <&a3_gpio_pulldown>; + pinctrl-45 = <&a4_gpio>; + pinctrl-46 = <&a4_gpio_pullup>; + pinctrl-47 = <&a4_gpio_pulldown>; + pinctrl-48 = <&a5_gpio>; + pinctrl-49 = <&a5_gpio_pullup>; + pinctrl-50 = <&a5_gpio_pulldown>; + + d0_uart0_rxd: d0-uart0-rxd-pins { + pinctrl-single,pins = < + /* (P4) MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) + >; + }; + + d0_gpio: d0-gpio-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) + >; + }; + + d0_gpio_pullup: d0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7) + >; + }; + + d0_gpio_pulldown: d0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d1_uart0_txd: d1-uart0-txd-pins { + pinctrl-single,pins = < + /* (P5) MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) + >; + }; + + d1_gpio: d1-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pullup: d1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pulldown: d1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d2_uart0_ctsn: d2-uart0-ctsn-pins { + pinctrl-single,pins = < + /* (P1) MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) + >; + }; + + d2_gpio: d2-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pullup: d2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pulldown: d2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d3_uart0_rtsn: d3-uart0-rtsn-pins { + pinctrl-single,pins = < + /* (N3) MCU_UART0_RTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) + >; + }; + + d3_gpio: d3-gpio-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pullup: d3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pulldown: d3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d10_spi0_cs0: d10-spi0-cs0-pins { + pinctrl-single,pins = < + /* (Y4) MCU_SPI0_CS0 */ + AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) + >; + }; + + d10_gpio: d10-gpio-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pullup: d10-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pulldown: d10-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d11_spi0_d0: d11-spi0-d0-pins { + pinctrl-single,pins = < + /* (Y3) MCU_SPI0_D0 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) + >; + }; + + d11_gpio: d11-gpio-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pullup: d11-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pulldown: d11-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d12_spi0_d1: d12-spi0-d1-pins { + pinctrl-single,pins = < + /* (Y2) MCU_SPI0_D1 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) + >; + }; + + d12_gpio: d12-gpio-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pullup: d12-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pulldown: d12-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d13_spi0_clk: d13-spi0-clk-pins { + pinctrl-single,pins = < + /* (Y1) MCU_SPI0_CLK */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) + >; + }; + + d13_gpio: d13-gpio-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pullup: d13-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pulldown: d13-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a0_gpio: a0-gpio-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pullup: a0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pulldown: a0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a1_gpio: a1-gpio-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pullup: a1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pulldown: a1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a2_gpio: a2-gpio-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pullup: a2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pulldown: a2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a3_gpio: a3-gpio-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pullup: a3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pulldown: a3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a4_gpio: a4-gpio-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pullup: a4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pulldown: a4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a5_gpio: a5-gpio-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7) + >; + }; + + a5_gpio_pullup: a5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7) + >; + }; + + a5_gpio_pulldown: a5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + /* (AC7) WKUP_I2C0_SCL */ + AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) + /* (AD6) WKUP_I2C0_SDA */ + AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) + >; + }; + + arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins { + pinctrl-single,pins = < + /* (R2) WKUP_GPIO0_21 */ + AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7) + >; + }; + + arduino_io_oe_pins_default: arduino-io-oe-default-pins { + pinctrl-single,pins = < + /* (N4) WKUP_GPIO0_34 */ + AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7) + /* (M2) WKUP_GPIO0_36 */ + AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7) + /* (M3) WKUP_GPIO0_37 */ + AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7) + /* (M4) WKUP_GPIO0_38 */ + AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7) + /* (M1) WKUP_GPIO0_41 */ + AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7) + >; + }; +}; + +&main_pmx0 { + pinctrl-names = + "default", + "d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown", + "d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown", + "d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown", + "d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown", + "d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown", + "d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown"; + + pinctrl-0 = <&d4_ehrpwm0_a>; + pinctrl-1 = <&d4_ehrpwm0_a>; + pinctrl-2 = <&d4_gpio>; + pinctrl-3 = <&d4_gpio_pullup>; + pinctrl-4 = <&d4_gpio_pulldown>; + + pinctrl-5 = <&d5_ehrpwm1_a>; + pinctrl-6 = <&d5_gpio>; + pinctrl-7 = <&d5_gpio_pullup>; + pinctrl-8 = <&d5_gpio_pulldown>; + + pinctrl-9 = <&d6_ehrpwm2_a>; + pinctrl-10 = <&d6_gpio>; + pinctrl-11 = <&d6_gpio_pullup>; + pinctrl-12 = <&d6_gpio_pulldown>; + + pinctrl-13 = <&d7_ehrpwm3_a>; + pinctrl-14 = <&d7_gpio>; + pinctrl-15 = <&d7_gpio_pullup>; + pinctrl-16 = <&d7_gpio_pulldown>; + + pinctrl-17 = <&d8_ehrpwm4_a>; + pinctrl-18 = <&d8_gpio>; + pinctrl-19 = <&d8_gpio_pullup>; + pinctrl-20 = <&d8_gpio_pulldown>; + + pinctrl-21 = <&d9_ehrpwm5_a>; + pinctrl-22 = <&d9_gpio>; + pinctrl-23 = <&d9_gpio_pullup>; + pinctrl-24 = <&d9_gpio_pulldown>; + + d4_ehrpwm0_a: d4-ehrpwm0-a-pins { + pinctrl-single,pins = < + /* (AG18) EHRPWM0_A */ + AM65X_IOPAD(0x0084, PIN_OUTPUT, 5) + >; + }; + + d4_gpio: d4-gpio-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + d4_gpio_pullup: d4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) + >; + }; + + d4_gpio_pulldown: d4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d5_ehrpwm1_a: d5-ehrpwm1-a-pins { + pinctrl-single,pins = < + /* (AF17) EHRPWM1_A */ + AM65X_IOPAD(0x008C, PIN_OUTPUT, 5) + >; + }; + + d5_gpio: d5-gpio-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT, 7) + >; + }; + + d5_gpio_pullup: d5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7) + >; + }; + + d5_gpio_pulldown: d5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d6_ehrpwm2_a: d6-ehrpwm2-a-pins { + pinctrl-single,pins = < + /* (AH16) EHRPWM2_A */ + AM65X_IOPAD(0x0098, PIN_OUTPUT, 5) + >; + }; + + d6_gpio: d6-gpio-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d6_gpio_pullup: d6-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7) + >; + }; + + d6_gpio_pulldown: d6-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d7_ehrpwm3_a: d7-ehrpwm3-a-pins { + pinctrl-single,pins = < + /* (AH15) EHRPWM3_A */ + AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5) + >; + }; + + d7_gpio: d7-gpio-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT, 7) + >; + }; + + d7_gpio_pullup: d7-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7) + >; + }; + + d7_gpio_pulldown: d7-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d8_ehrpwm4_a: d8-ehrpwm4-a-pins { + pinctrl-single,pins = < + /* (AG15) EHRPWM4_A */ + AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5) + >; + }; + + d8_gpio: d8-gpio-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT, 7) + >; + }; + + d8_gpio_pullup: d8-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7) + >; + }; + + d8_gpio_pulldown: d8-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d9_ehrpwm5_a: d9-ehrpwm5-a-pins { + pinctrl-single,pins = < + /* (AD15) EHRPWM5_A */ + AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5) + >; + }; + + d9_gpio: d9-gpio-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT, 7) + >; + }; + + d9_gpio_pullup: d9-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7) + >; + }; + + d9_gpio_pulldown: d9-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7) + >; + }; +}; + +&main_gpio0 { + gpio-line-names = + "main_gpio0-base", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "IO4", "", "IO5", "", "", "IO6", "", + "", "", "", "IO7", "", "", "", "", "IO8", "", + "", "IO9"; +}; + +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = + <&arduino_i2c_aio_switch_pins_default>, + <&arduino_io_oe_pins_default>, + <&push_button_pins_default>, + <&db9_com_mode_pins_default>; + gpio-line-names = + /* 0..9 */ + "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", + "UART0-enable", "UART0-terminate", "", "WIFI-disable", + /* 10..19 */ + "", "", "", "", "", "", "", "", "", "", + /* 20..29 */ + "", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0", + /* 30..39 */ + "IO1", "IO2", "", "IO3", "IO17-direction", "A5", + "IO16-direction", "IO15-direction", "IO14-direction", "A3", + /* 40..49 */ + "", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13", + "IO11", + /* 50..51 */ + "IO12", "IO10"; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; +}; + +&mcu_i2c0 { + /* D4200 */ + pcal9535_1: gpio@20 { + compatible = "nxp,pcal9535"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull", + "A5-pull", "", "", + "IO14-enable", "IO15-enable", "IO16-enable", + "IO17-enable", "IO18-enable", "IO19-enable"; + }; + + /* D4201 */ + pcal9535_2: gpio@21 { + compatible = "nxp,pcal9535"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "IO0-direction", "IO1-direction", "IO2-direction", + "IO3-direction", "IO4-direction", "IO5-direction", + "IO6-direction", "IO7-direction", + "IO8-direction", "IO9-direction", "IO10-direction", + "IO11-direction", "IO12-direction", "IO13-direction", + "IO19-direction"; + }; + + /* D4202 */ + pcal9535_3: gpio@25 { + compatible = "nxp,pcal9535"; + reg = <0x25>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull", + "IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull", + "IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull", + "IO12-pull", "IO13-pull"; + }; +}; + +&mcu_uart0 { + status = "okay"; +}; + +&tscadc1 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5>; + }; +}; diff --git a/dts/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi index 1d19798595..c50a585dd6 100644 --- a/dts/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi +++ b/dts/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) Siemens AG, 2021-2023 * @@ -8,10 +8,7 @@ * Common bits of the IOT2050 Basic and Advanced variants, PG1 */ -&dss { - assigned-clocks = <&k3_clks 67 2>; - assigned-clock-parents = <&k3_clks 67 5>; -}; +#include "k3-am65-iot2050-dp.dtsi" &serdes0 { status = "disabled"; diff --git a/dts/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi index e9b57b87e4..e2584a5efe 100644 --- a/dts/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi +++ b/dts/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) Siemens AG, 2021 + * Copyright (c) Siemens AG, 2021-2023 * * Authors: * Chao Zeng <chao.zeng@siemens.com> @@ -9,6 +9,11 @@ * Common bits of the IOT2050 Basic and Advanced variants, PG2 */ +&mcu_r5fss0 { + /* lock-step mode not supported on PG2 boards */ + ti,cluster-mode = <0>; +}; + &main_pmx0 { cp2102n_reset_pin_default: cp2102n-reset-default-pins { pinctrl-single,pins = < @@ -33,21 +38,3 @@ /* Workaround needed to get DP clock of 154Mhz */ assigned-clocks = <&k3_clks 67 0>; }; - -&serdes0 { - assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; - assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>; -}; - -&dwc3_0 { - assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ - <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ - phys = <&serdes0 PHY_TYPE_USB3 0>; - phy-names = "usb3-phy"; -}; - -&usb0 { - maximum-speed = "super-speed"; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; -}; diff --git a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi index 61a634afaa..ef34b851e1 100644 --- a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi +++ b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) Siemens AG, 2018-2021 + * Copyright (c) Siemens AG, 2018-2024 * * Authors: * Le Jin <le.jin@siemens.com> @@ -9,6 +9,7 @@ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 */ +#include <dt-bindings/leds/common.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/net/ti-dp83867.h> @@ -75,6 +76,12 @@ alignment = <0x1000>; no-map; }; + + /* To reserve the power-on(PON) reason for watchdog reset */ + wdt_reset_memory_region: wdt-memory@a2200000 { + reg = <0x00 0xa2200000 0x00 0x1000>; + no-map; + }; }; leds { @@ -82,28 +89,46 @@ pinctrl-names = "default"; pinctrl-0 = <&leds_pins_default>; - status-led-red { + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + label = "status-led-red"; gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>; panic-indicator; }; - status-led-green { + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + label = "status-led-green"; gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>; }; - user-led1-red { + led-2 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + label = "user-led1-red"; gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>; }; - user-led1-green { + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + label = "user-led1-green"; gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>; }; - user-led2-red { + led-4 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + label = "user-led2-red"; gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>; }; - user-led2-green { + led-5 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + label = "user-led2-green"; gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>; }; }; @@ -186,434 +211,6 @@ }; &wkup_pmx0 { - pinctrl-names = - "default", - "d0-uart0-rxd", "d0-gpio", "d0-gpio-pullup", "d0-gpio-pulldown", - "d1-uart0-txd", "d1-gpio", "d1-gpio-pullup", "d1-gpio-pulldown", - "d2-uart0-ctsn", "d2-gpio", "d2-gpio-pullup", "d2-gpio-pulldown", - "d3-uart0-rtsn", "d3-gpio", "d3-gpio-pullup", "d3-gpio-pulldown", - "d10-spi0-cs0", "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown", - "d11-spi0-d0", "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown", - "d12-spi0-d1", "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown", - "d13-spi0-clk", "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown", - "a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown", - "a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown", - "a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown", - "a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown", - "a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown", - "a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown"; - - pinctrl-0 = <&d0_uart0_rxd>; - pinctrl-1 = <&d0_uart0_rxd>; - pinctrl-2 = <&d0_gpio>; - pinctrl-3 = <&d0_gpio_pullup>; - pinctrl-4 = <&d0_gpio_pulldown>; - pinctrl-5 = <&d1_uart0_txd>; - pinctrl-6 = <&d1_gpio>; - pinctrl-7 = <&d1_gpio_pullup>; - pinctrl-8 = <&d1_gpio_pulldown>; - pinctrl-9 = <&d2_uart0_ctsn>; - pinctrl-10 = <&d2_gpio>; - pinctrl-11 = <&d2_gpio_pullup>; - pinctrl-12 = <&d2_gpio_pulldown>; - pinctrl-13 = <&d3_uart0_rtsn>; - pinctrl-14 = <&d3_gpio>; - pinctrl-15 = <&d3_gpio_pullup>; - pinctrl-16 = <&d3_gpio_pulldown>; - pinctrl-17 = <&d10_spi0_cs0>; - pinctrl-18 = <&d10_gpio>; - pinctrl-19 = <&d10_gpio_pullup>; - pinctrl-20 = <&d10_gpio_pulldown>; - pinctrl-21 = <&d11_spi0_d0>; - pinctrl-22 = <&d11_gpio>; - pinctrl-23 = <&d11_gpio_pullup>; - pinctrl-24 = <&d11_gpio_pulldown>; - pinctrl-25 = <&d12_spi0_d1>; - pinctrl-26 = <&d12_gpio>; - pinctrl-27 = <&d12_gpio_pullup>; - pinctrl-28 = <&d12_gpio_pulldown>; - pinctrl-29 = <&d13_spi0_clk>; - pinctrl-30 = <&d13_gpio>; - pinctrl-31 = <&d13_gpio_pullup>; - pinctrl-32 = <&d13_gpio_pulldown>; - pinctrl-33 = <&a0_gpio>; - pinctrl-34 = <&a0_gpio_pullup>; - pinctrl-35 = <&a0_gpio_pulldown>; - pinctrl-36 = <&a1_gpio>; - pinctrl-37 = <&a1_gpio_pullup>; - pinctrl-38 = <&a1_gpio_pulldown>; - pinctrl-39 = <&a2_gpio>; - pinctrl-40 = <&a2_gpio_pullup>; - pinctrl-41 = <&a2_gpio_pulldown>; - pinctrl-42 = <&a3_gpio>; - pinctrl-43 = <&a3_gpio_pullup>; - pinctrl-44 = <&a3_gpio_pulldown>; - pinctrl-45 = <&a4_gpio>; - pinctrl-46 = <&a4_gpio_pullup>; - pinctrl-47 = <&a4_gpio_pulldown>; - pinctrl-48 = <&a5_gpio>; - pinctrl-49 = <&a5_gpio_pullup>; - pinctrl-50 = <&a5_gpio_pulldown>; - - d0_uart0_rxd: d0-uart0-rxd-pins { - pinctrl-single,pins = < - /* (P4) MCU_UART0_RXD */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) - >; - }; - - d0_gpio: d0-gpio-pins { - pinctrl-single,pins = < - /* (P4) WKUP_GPIO0_29 */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) - >; - }; - - d0_gpio_pullup: d0-gpio-pullup-pins { - pinctrl-single,pins = < - /* (P4) WKUP_GPIO0_29 */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7) - >; - }; - - d0_gpio_pulldown: d0-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (P4) WKUP_GPIO0_29 */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d1_uart0_txd: d1-uart0-txd-pins { - pinctrl-single,pins = < - /* (P5) MCU_UART0_TXD */ - AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) - >; - }; - - d1_gpio: d1-gpio-pins { - pinctrl-single,pins = < - /* (P5) WKUP_GPIO0_30 */ - AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) - >; - }; - - d1_gpio_pullup: d1-gpio-pullup-pins { - pinctrl-single,pins = < - /* (P5) WKUP_GPIO0_30 */ - AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) - >; - }; - - d1_gpio_pulldown: d1-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (P5) WKUP_GPIO0_30 */ - AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d2_uart0_ctsn: d2-uart0-ctsn-pins { - pinctrl-single,pins = < - /* (P1) MCU_UART0_CTSn */ - AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) - >; - }; - - d2_gpio: d2-gpio-pins { - pinctrl-single,pins = < - /* (P5) WKUP_GPIO0_31 */ - AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) - >; - }; - - d2_gpio_pullup: d2-gpio-pullup-pins { - pinctrl-single,pins = < - /* (P5) WKUP_GPIO0_31 */ - AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) - >; - }; - - d2_gpio_pulldown: d2-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (P5) WKUP_GPIO0_31 */ - AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d3_uart0_rtsn: d3-uart0-rtsn-pins { - pinctrl-single,pins = < - /* (N3) MCU_UART0_RTSn */ - AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) - >; - }; - - d3_gpio: d3-gpio-pins { - pinctrl-single,pins = < - /* (N3) WKUP_GPIO0_33 */ - AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) - >; - }; - - d3_gpio_pullup: d3-gpio-pullup-pins { - pinctrl-single,pins = < - /* (N3) WKUP_GPIO0_33 */ - AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) - >; - }; - - d3_gpio_pulldown: d3-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (N3) WKUP_GPIO0_33 */ - AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d10_spi0_cs0: d10-spi0-cs0-pins { - pinctrl-single,pins = < - /* (Y4) MCU_SPI0_CS0 */ - AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) - >; - }; - - d10_gpio: d10-gpio-pins { - pinctrl-single,pins = < - /* (Y4) WKUP_GPIO0_51 */ - AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) - >; - }; - - d10_gpio_pullup: d10-gpio-pullup-pins { - pinctrl-single,pins = < - /* (Y4) WKUP_GPIO0_51 */ - AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) - >; - }; - - d10_gpio_pulldown: d10-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (Y4) WKUP_GPIO0_51 */ - AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d11_spi0_d0: d11-spi0-d0-pins { - pinctrl-single,pins = < - /* (Y3) MCU_SPI0_D0 */ - AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) - >; - }; - - d11_gpio: d11-gpio-pins { - pinctrl-single,pins = < - /* (Y3) WKUP_GPIO0_49 */ - AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) - >; - }; - - d11_gpio_pullup: d11-gpio-pullup-pins { - pinctrl-single,pins = < - /* (Y3) WKUP_GPIO0_49 */ - AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) - >; - }; - - d11_gpio_pulldown: d11-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (Y3) WKUP_GPIO0_49 */ - AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d12_spi0_d1: d12-spi0-d1-pins { - pinctrl-single,pins = < - /* (Y2) MCU_SPI0_D1 */ - AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) - >; - }; - - d12_gpio: d12-gpio-pins { - pinctrl-single,pins = < - /* (Y2) WKUP_GPIO0_50 */ - AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) - >; - }; - - d12_gpio_pullup: d12-gpio-pullup-pins { - pinctrl-single,pins = < - /* (Y2) WKUP_GPIO0_50 */ - AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) - >; - }; - - d12_gpio_pulldown: d12-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (Y2) WKUP_GPIO0_50 */ - AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d13_spi0_clk: d13-spi0-clk-pins { - pinctrl-single,pins = < - /* (Y1) MCU_SPI0_CLK */ - AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) - >; - }; - - d13_gpio: d13-gpio-pins { - pinctrl-single,pins = < - /* (Y1) WKUP_GPIO0_48 */ - AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) - >; - }; - - d13_gpio_pullup: d13-gpio-pullup-pins { - pinctrl-single,pins = < - /* (Y1) WKUP_GPIO0_48 */ - AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) - >; - }; - - d13_gpio_pulldown: d13-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (Y1) WKUP_GPIO0_48 */ - AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7) - >; - }; - - a0_gpio: a0-gpio-pins { - pinctrl-single,pins = < - /* (L6) WKUP_GPIO0_45 */ - AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) - >; - }; - - a0_gpio_pullup: a0-gpio-pullup-pins { - pinctrl-single,pins = < - /* (L6) WKUP_GPIO0_45 */ - AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) - >; - }; - - a0_gpio_pulldown: a0-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (L6) WKUP_GPIO0_45 */ - AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) - >; - }; - - a1_gpio: a1-gpio-pins { - pinctrl-single,pins = < - /* (M6) WKUP_GPIO0_44 */ - AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) - >; - }; - - a1_gpio_pullup: a1-gpio-pullup-pins { - pinctrl-single,pins = < - /* (M6) WKUP_GPIO0_44 */ - AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) - >; - }; - - a1_gpio_pulldown: a1-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (M6) WKUP_GPIO0_44 */ - AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7) - >; - }; - - a2_gpio: a2-gpio-pins { - pinctrl-single,pins = < - /* (L5) WKUP_GPIO0_43 */ - AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) - >; - }; - - a2_gpio_pullup: a2-gpio-pullup-pins { - pinctrl-single,pins = < - /* (L5) WKUP_GPIO0_43 */ - AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) - >; - }; - - a2_gpio_pulldown: a2-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (L5) WKUP_GPIO0_43 */ - AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7) - >; - }; - - a3_gpio: a3-gpio-pins { - pinctrl-single,pins = < - /* (M5) WKUP_GPIO0_39 */ - AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) - >; - }; - - a3_gpio_pullup: a3-gpio-pullup-pins { - pinctrl-single,pins = < - /* (M5) WKUP_GPIO0_39 */ - AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) - >; - }; - - a3_gpio_pulldown: a3-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (M5) WKUP_GPIO0_39 */ - AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7) - >; - }; - - a4_gpio: a4-gpio-pins { - pinctrl-single,pins = < - /* (L2) WKUP_GPIO0_42 */ - AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) - >; - }; - - a4_gpio_pullup: a4-gpio-pullup-pins { - pinctrl-single,pins = < - /* (L2) WKUP_GPIO0_42 */ - AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) - >; - }; - - a4_gpio_pulldown: a4-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (L2) WKUP_GPIO0_42 */ - AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7) - >; - }; - - a5_gpio: a5-gpio-pins { - pinctrl-single,pins = < - /* (N5) WKUP_GPIO0_35 */ - AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7) - >; - }; - - a5_gpio_pullup: a5-gpio-pullup-pins { - pinctrl-single,pins = < - /* (N5) WKUP_GPIO0_35 */ - AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7) - >; - }; - - a5_gpio_pulldown: a5-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (N5) WKUP_GPIO0_35 */ - AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7) - >; - }; - - wkup_i2c0_pins_default: wkup-i2c0-default-pins { - pinctrl-single,pins = < - /* (AC7) WKUP_I2C0_SCL */ - AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) - /* (AD6) WKUP_I2C0_SDA */ - AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) - >; - }; - mcu_i2c0_pins_default: mcu-i2c0-default-pins { pinctrl-single,pins = < /* (AD8) MCU_I2C0_SCL */ @@ -623,13 +220,6 @@ >; }; - arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins { - pinctrl-single,pins = < - /* (R2) WKUP_GPIO0_21 */ - AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7) - >; - }; - push_button_pins_default: push-button-default-pins { pinctrl-single,pins = < /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ @@ -637,22 +227,6 @@ >; }; - - arduino_io_oe_pins_default: arduino-io-oe-default-pins { - pinctrl-single,pins = < - /* (N4) WKUP_GPIO0_34 */ - AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7) - /* (M2) WKUP_GPIO0_36 */ - AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7) - /* (M3) WKUP_GPIO0_37 */ - AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7) - /* (M4) WKUP_GPIO0_38 */ - AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7) - /* (M1) WKUP_GPIO0_41 */ - AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7) - >; - }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < /* (V1) MCU_OSPI0_CLK */ @@ -716,214 +290,6 @@ }; &main_pmx0 { - pinctrl-names = - "default", - "d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown", - "d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown", - "d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown", - "d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown", - "d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown", - "d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown"; - - pinctrl-0 = <&d4_ehrpwm0_a>; - pinctrl-1 = <&d4_ehrpwm0_a>; - pinctrl-2 = <&d4_gpio>; - pinctrl-3 = <&d4_gpio_pullup>; - pinctrl-4 = <&d4_gpio_pulldown>; - - pinctrl-5 = <&d5_ehrpwm1_a>; - pinctrl-6 = <&d5_gpio>; - pinctrl-7 = <&d5_gpio_pullup>; - pinctrl-8 = <&d5_gpio_pulldown>; - - pinctrl-9 = <&d6_ehrpwm2_a>; - pinctrl-10 = <&d6_gpio>; - pinctrl-11 = <&d6_gpio_pullup>; - pinctrl-12 = <&d6_gpio_pulldown>; - - pinctrl-13 = <&d7_ehrpwm3_a>; - pinctrl-14 = <&d7_gpio>; - pinctrl-15 = <&d7_gpio_pullup>; - pinctrl-16 = <&d7_gpio_pulldown>; - - pinctrl-17 = <&d8_ehrpwm4_a>; - pinctrl-18 = <&d8_gpio>; - pinctrl-19 = <&d8_gpio_pullup>; - pinctrl-20 = <&d8_gpio_pulldown>; - - pinctrl-21 = <&d9_ehrpwm5_a>; - pinctrl-22 = <&d9_gpio>; - pinctrl-23 = <&d9_gpio_pullup>; - pinctrl-24 = <&d9_gpio_pulldown>; - - d4_ehrpwm0_a: d4-ehrpwm0-a-pins { - pinctrl-single,pins = < - /* (AG18) EHRPWM0_A */ - AM65X_IOPAD(0x0084, PIN_OUTPUT, 5) - >; - }; - - d4_gpio: d4-gpio-pins { - pinctrl-single,pins = < - /* (AG18) GPIO0_33 */ - AM65X_IOPAD(0x0084, PIN_INPUT, 7) - >; - }; - - d4_gpio_pullup: d4-gpio-pullup-pins { - pinctrl-single,pins = < - /* (AG18) GPIO0_33 */ - AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) - >; - }; - - d4_gpio_pulldown: d4-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (AG18) GPIO0_33 */ - AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d5_ehrpwm1_a: d5-ehrpwm1-a-pins { - pinctrl-single,pins = < - /* (AF17) EHRPWM1_A */ - AM65X_IOPAD(0x008C, PIN_OUTPUT, 5) - >; - }; - - d5_gpio: d5-gpio-pins { - pinctrl-single,pins = < - /* (AF17) GPIO0_35 */ - AM65X_IOPAD(0x008C, PIN_INPUT, 7) - >; - }; - - d5_gpio_pullup: d5-gpio-pullup-pins { - pinctrl-single,pins = < - /* (AF17) GPIO0_35 */ - AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7) - >; - }; - - d5_gpio_pulldown: d5-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (AF17) GPIO0_35 */ - AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d6_ehrpwm2_a: d6-ehrpwm2-a-pins { - pinctrl-single,pins = < - /* (AH16) EHRPWM2_A */ - AM65X_IOPAD(0x0098, PIN_OUTPUT, 5) - >; - }; - - d6_gpio: d6-gpio-pins { - pinctrl-single,pins = < - /* (AH16) GPIO0_38 */ - AM65X_IOPAD(0x0098, PIN_INPUT, 7) - >; - }; - - d6_gpio_pullup: d6-gpio-pullup-pins { - pinctrl-single,pins = < - /* (AH16) GPIO0_38 */ - AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7) - >; - }; - - d6_gpio_pulldown: d6-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (AH16) GPIO0_38 */ - AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d7_ehrpwm3_a: d7-ehrpwm3-a-pins { - pinctrl-single,pins = < - /* (AH15) EHRPWM3_A */ - AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5) - >; - }; - - d7_gpio: d7-gpio-pins { - pinctrl-single,pins = < - /* (AH15) GPIO0_43 */ - AM65X_IOPAD(0x00AC, PIN_INPUT, 7) - >; - }; - - d7_gpio_pullup: d7-gpio-pullup-pins { - pinctrl-single,pins = < - /* (AH15) GPIO0_43 */ - AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7) - >; - }; - - d7_gpio_pulldown: d7-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (AH15) GPIO0_43 */ - AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d8_ehrpwm4_a: d8-ehrpwm4-a-pins { - pinctrl-single,pins = < - /* (AG15) EHRPWM4_A */ - AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5) - >; - }; - - d8_gpio: d8-gpio-pins { - pinctrl-single,pins = < - /* (AG15) GPIO0_48 */ - AM65X_IOPAD(0x00C0, PIN_INPUT, 7) - >; - }; - - d8_gpio_pullup: d8-gpio-pullup-pins { - pinctrl-single,pins = < - /* (AG15) GPIO0_48 */ - AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7) - >; - }; - - d8_gpio_pulldown: d8-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (AG15) GPIO0_48 */ - AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7) - >; - }; - - d9_ehrpwm5_a: d9-ehrpwm5-a-pins { - pinctrl-single,pins = < - /* (AD15) EHRPWM5_A */ - AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5) - >; - }; - - d9_gpio: d9-gpio-pins { - pinctrl-single,pins = < - /* (AD15) GPIO0_51 */ - AM65X_IOPAD(0x00CC, PIN_INPUT, 7) - >; - }; - - d9_gpio_pullup: d9-gpio-pullup-pins { - pinctrl-single,pins = < - /* (AD15) GPIO0_51 */ - AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7) - >; - }; - - d9_gpio_pulldown: d9-gpio-pulldown-pins { - pinctrl-single,pins = < - /* (AD15) GPIO0_51 */ - AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7) - >; - }; - main_pcie_enable_pins_default: main-pcie-enable-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ @@ -971,45 +337,6 @@ >; }; - dss_vout1_pins_default: dss-vout1-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ - AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */ - AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */ - AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */ - AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */ - AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */ - AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */ - AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */ - AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */ - AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */ - AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */ - AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */ - AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */ - AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */ - AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */ - AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */ - AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */ - AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */ - AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */ - AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */ - AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */ - AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */ - AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */ - AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */ - AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */ - AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */ - AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */ - AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */ - >; - }; - - dp_pins_default: dp-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */ - >; - }; - main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */ @@ -1082,57 +409,11 @@ pinctrl-0 = <&main_uart1_pins_default>; }; -&mcu_uart0 { - status = "okay"; -}; - -&main_gpio0 { - gpio-line-names = - "main_gpio0-base", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", - "", "", "", "IO4", "", "IO5", "", "", "IO6", "", - "", "", "", "IO7", "", "", "", "", "IO8", "", - "", "IO9"; -}; - &main_gpio1 { pinctrl-names = "default"; pinctrl-0 = <&main_pcie_enable_pins_default>; }; -&wkup_gpio0 { - pinctrl-names = "default"; - pinctrl-0 = - <&arduino_i2c_aio_switch_pins_default>, - <&arduino_io_oe_pins_default>, - <&push_button_pins_default>, - <&db9_com_mode_pins_default>; - gpio-line-names = - /* 0..9 */ - "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", - "UART0-enable", "UART0-terminate", "", "WIFI-disable", - /* 10..19 */ - "", "", "", "", "", "", "", "", "", "", - /* 20..29 */ - "", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0", - /* 30..39 */ - "IO1", "IO2", "", "IO3", "IO17-direction", "A5", - "IO16-direction", "IO15-direction", "IO14-direction", "A3", - /* 40..49 */ - "", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13", - "IO11", - /* 50..51 */ - "IO12", "IO10"; -}; - -&wkup_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default>; - clock-frequency = <400000>; -}; - &mcu_i2c0 { status = "okay"; pinctrl-names = "default"; @@ -1150,47 +431,6 @@ ti,vsel1-state-high; ti,enable-vout-discharge; }; - - /* D4200 */ - pcal9535_1: gpio@20 { - compatible = "nxp,pcal9535"; - reg = <0x20>; - #gpio-cells = <2>; - gpio-controller; - gpio-line-names = - "A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull", - "A5-pull", "", "", - "IO14-enable", "IO15-enable", "IO16-enable", - "IO17-enable", "IO18-enable", "IO19-enable"; - }; - - /* D4201 */ - pcal9535_2: gpio@21 { - compatible = "nxp,pcal9535"; - reg = <0x21>; - #gpio-cells = <2>; - gpio-controller; - gpio-line-names = - "IO0-direction", "IO1-direction", "IO2-direction", - "IO3-direction", "IO4-direction", "IO5-direction", - "IO6-direction", "IO7-direction", - "IO8-direction", "IO9-direction", "IO10-direction", - "IO11-direction", "IO12-direction", "IO13-direction", - "IO19-direction"; - }; - - /* D4202 */ - pcal9535_3: gpio@25 { - compatible = "nxp,pcal9535"; - reg = <0x25>; - #gpio-cells = <2>; - gpio-controller; - gpio-line-names = - "IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull", - "IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull", - "IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull", - "IO12-pull", "IO13-pull"; - }; }; &main_i2c0 { @@ -1233,32 +473,6 @@ #address-cells = <1>; #size-cells = <0>; - - edp-bridge@f { - compatible = "toshiba,tc358767"; - reg = <0x0f>; - pinctrl-names = "default"; - pinctrl-0 = <&dp_pins_default>; - reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; - - clock-names = "ref"; - clocks = <&dp_refclk>; - - toshiba,hpd-pin = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - bridge_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - }; - }; }; &mcu_cpsw { @@ -1292,13 +506,6 @@ ti,pindir-d0-out-d1-in; }; -&tscadc1 { - status = "okay"; - adc { - ti,adc-channels = <0 1 2 3 4 5>; - }; -}; - &ospi0 { status = "okay"; pinctrl-names = "default"; @@ -1364,26 +571,6 @@ }; }; -&dss { - pinctrl-names = "default"; - pinctrl-0 = <&dss_vout1_pins_default>; - - assigned-clocks = <&k3_clks 67 2>; - assigned-clock-parents = <&k3_clks 67 5>; -}; - -&dss_ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - - dpi_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; -}; - &pcie1_rc { status = "okay"; pinctrl-names = "default"; @@ -1418,13 +605,17 @@ &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; +}; + +&mcu_rti1 { + memory-region = <&wdt_reset_memory_region>; }; &icssg0_mdio { diff --git a/dts/src/arm64/ti/k3-am65-iot2050-dp.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-dp.dtsi new file mode 100644 index 0000000000..984cc80913 --- /dev/null +++ b/dts/src/arm64/ti/k3-am65-iot2050-dp.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Siemens AG, 2024 + * + * Authors: + * Jan Kiszka <jan.kiszka@siemens.com> + * + * Common bits for IOT2050 variants with Display Port + */ + +&main_pmx0 { + dss_vout1_pins_default: dss-vout1-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ + AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */ + AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */ + AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */ + AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */ + AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */ + AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */ + AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */ + AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */ + AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */ + AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */ + AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */ + AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */ + AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */ + AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */ + AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */ + AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */ + AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */ + AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */ + AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */ + AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */ + AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */ + AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */ + AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */ + AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */ + AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */ + AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */ + AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */ + >; + }; + + dp_pins_default: dp-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */ + >; + }; +}; + +&main_i2c3 { + edp-bridge@f { + compatible = "toshiba,tc358767"; + reg = <0x0f>; + pinctrl-names = "default"; + pinctrl-0 = <&dp_pins_default>; + reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; + + clock-names = "ref"; + clocks = <&dp_refclk>; + + toshiba,hpd-pin = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_vout1_pins_default>; + + assigned-clocks = <&k3_clks 67 2>; + assigned-clock-parents = <&k3_clks 67 5>; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + + dpi_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; +}; diff --git a/dts/src/arm64/ti/k3-am65-iot2050-usb3.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-usb3.dtsi new file mode 100644 index 0000000000..e5bd7c301b --- /dev/null +++ b/dts/src/arm64/ti/k3-am65-iot2050-usb3.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Siemens AG, 2024 + * + * Authors: + * Jan Kiszka <jan.kiszka@siemens.com> + * + * Common bits for IOT2050 variants with USB3 support + */ + +&serdes0 { + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>; +}; + +&dwc3_0 { + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ + phys = <&serdes0 PHY_TYPE_USB3 0>; + phy-names = "usb3-phy"; +}; + +&usb0 { + maximum-speed = "super-speed"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; +}; diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi index fcea544656..ff857117d7 100644 --- a/dts/src/arm64/ti/k3-am65-main.dtsi +++ b/dts/src/arm64/ti/k3-am65-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM6 SoC Family Main Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/phy/phy-am654-serdes.h> @@ -886,20 +886,6 @@ status = "disabled"; }; - pcie0_ep: pcie-ep@5500000 { - compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; - reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&scm_conf 0x4060>; - num-ib-windows = <16>; - num-ob-windows = <16>; - max-link-speed = <2>; - dma-coherent; - interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - pcie1_rc: pcie@5600000 { compatible = "ti,am654-pcie-rc"; reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; @@ -921,20 +907,6 @@ status = "disabled"; }; - pcie1_ep: pcie-ep@5600000 { - compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; - reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&scm_conf 0x4070>; - num-ib-windows = <16>; - num-ob-windows = <16>; - max-link-speed = <2>; - dma-coherent; - interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - mcasp0: mcasp@2b00000 { compatible = "ti,am33xx-mcasp-audio"; reg = <0x0 0x02b00000 0x0 0x2000>, @@ -1019,9 +991,10 @@ <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ - <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ + <0x0 0x04a0b000 0x0 0x1000>, /* vp2 */ + <0x0 0x04a01000 0x0 0x1000>; /* common1 */ reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2"; + "ovr1", "ovr2", "vp1", "vp2", "common1"; ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; @@ -1050,6 +1023,13 @@ }; }; + gpu: gpu@7000000 { + compatible = "ti,am6548-gpu", "img,powervr-sgx544"; + reg = <0x0 0x7000000 0x0 0x10000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + }; + ehrpwm0: pwm@3000000 { compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi index ecd7356f33..6ff3ccc39f 100644 --- a/dts/src/arm64/ti/k3-am65-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM6 SoC Family MCU Domain peripherals * - * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { diff --git a/dts/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/src/arm64/ti/k3-am65-wakeup.dtsi index f037b36243..37527890dd 100644 --- a/dts/src/arm64/ti/k3-am65-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am65-wakeup.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_wakeup { diff --git a/dts/src/arm64/ti/k3-am65.dtsi b/dts/src/arm64/ti/k3-am65.dtsi index 4d7b6155a7..c59baebc5a 100644 --- a/dts/src/arm64/ti/k3-am65.dtsi +++ b/dts/src/arm64/ti/k3-am65.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM6 SoC Family * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h> diff --git a/dts/src/arm64/ti/k3-am652.dtsi b/dts/src/arm64/ti/k3-am652.dtsi index 0f22e00faa..cbb3caaf82 100644 --- a/dts/src/arm64/ti/k3-am652.dtsi +++ b/dts/src/arm64/ti/k3-am652.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM65 SoC family in Dual core configuration * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include "k3-am65.dtsi" diff --git a/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi b/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi index 1d6cddb119..eed6fe70d2 100644 --- a/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi +++ b/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) Siemens AG, 2018-2021 * @@ -11,6 +11,7 @@ #include "k3-am652.dtsi" #include "k3-am65-iot2050-common.dtsi" +#include "k3-am65-iot2050-arduino-connector.dtsi" / { memory@80000000 { @@ -40,8 +41,3 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; }; - -&mcu_r5fss0 { - /* lock-step mode not supported on Basic boards */ - ti,cluster-mode = <0>; -}; diff --git a/dts/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts b/dts/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts index c62549a4b4..c1faf9497b 100644 --- a/dts/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts +++ b/dts/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) Siemens AG, 2018-2021 * @@ -17,6 +17,8 @@ #include "k3-am6528-iot2050-basic-common.dtsi" #include "k3-am65-iot2050-common-pg2.dtsi" +#include "k3-am65-iot2050-dp.dtsi" +#include "k3-am65-iot2050-usb3.dtsi" / { compatible = "siemens,iot2050-basic-pg2", "ti,am654"; diff --git a/dts/src/arm64/ti/k3-am6528-iot2050-basic.dts b/dts/src/arm64/ti/k3-am6528-iot2050-basic.dts index 87928ff282..29a31891b3 100644 --- a/dts/src/arm64/ti/k3-am6528-iot2050-basic.dts +++ b/dts/src/arm64/ti/k3-am6528-iot2050-basic.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) Siemens AG, 2018-2021 * @@ -22,3 +22,8 @@ compatible = "siemens,iot2050-basic", "ti,am654"; model = "SIMATIC IOT2050 Basic"; }; + +&mcu_r5fss0 { + /* lock-step mode not supported on this board */ + ti,cluster-mode = <0>; +}; diff --git a/dts/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/dts/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso index 3be92c39ec..364c57b3b3 100644 --- a/dts/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso +++ b/dts/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso @@ -1,10 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM. * Panel Link: https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT * AM654 LCD EVM: https://www.ti.com/tool/TMDSLCD1EVM * - * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts index 822c288d27..aba0c52b12 100644 --- a/dts/src/arm64/ti/k3-am654-base-board.dts +++ b/dts/src/arm64/ti/k3-am654-base-board.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -531,13 +531,13 @@ &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; }; &ospi0 { diff --git a/dts/src/arm64/ti/k3-am654-icssg2.dtso b/dts/src/arm64/ti/k3-am654-icssg2.dtso index ec8cf20ca3..0a6e75265b 100644 --- a/dts/src/arm64/ti/k3-am654-icssg2.dtso +++ b/dts/src/arm64/ti/k3-am654-icssg2.dtso @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT overlay for IDK application board on AM654 EVM * - * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am654-idk.dtso b/dts/src/arm64/ti/k3-am654-idk.dtso index 150428dfce..8bdb87fcbd 100644 --- a/dts/src/arm64/ti/k3-am654-idk.dtso +++ b/dts/src/arm64/ti/k3-am654-idk.dtso @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT overlay for IDK application board on AM654 EVM * - * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-am654-industrial-thermal.dtsi b/dts/src/arm64/ti/k3-am654-industrial-thermal.dtsi index 9021c73805..de5a2ed907 100644 --- a/dts/src/arm64/ti/k3-am654-industrial-thermal.dtsi +++ b/dts/src/arm64/ti/k3-am654-industrial-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-am654-pcie-usb2.dtso b/dts/src/arm64/ti/k3-am654-pcie-usb2.dtso new file mode 100644 index 0000000000..c3cb752f8c --- /dev/null +++ b/dts/src/arm64/ti/k3-am654-pcie-usb2.dtso @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT overlay for SERDES personality card: 2lane PCIe + USB2.0 Host on AM654 EVM + * + * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/phy/phy-am654-serdes.h> +#include "k3-pinctrl.h" + +&serdes0 { + assigned-clocks = <&k3_clks 153 4>, + <&serdes0 AM654_SERDES_CMU_REFCLK>, + <&serdes0 AM654_SERDES_RO_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, + <&k3_clks 153 4>, + <&k3_clks 153 4>; + status = "okay"; +}; + +&serdes1 { + assigned-clocks = <&serdes1 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&serdes0 AM654_SERDES_RO_REFCLK>; + status = "okay"; +}; + +&pcie0_rc { + num-lanes = <2>; + phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy0", "pcie-phy1"; + reset-gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&main_pmx0 { + usb0_pins_default: usb0-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ + >; + }; +}; + +&dwc3_0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_default>; + dr_mode = "host"; +}; diff --git a/dts/src/arm64/ti/k3-am654-pcie-usb3.dtso b/dts/src/arm64/ti/k3-am654-pcie-usb3.dtso new file mode 100644 index 0000000000..333e423e8b --- /dev/null +++ b/dts/src/arm64/ti/k3-am654-pcie-usb3.dtso @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT overlay for SERDES personality card: 1lane PCIe + USB3.0 DRD on AM654 EVM + * + * Copyright (C) 2018-2024 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/phy/phy-am654-serdes.h> + +#include "k3-pinctrl.h" + +&serdes1 { + status = "okay"; +}; + +&pcie1_rc { + num-lanes = <1>; + phys = <&serdes1 PHY_TYPE_PCIE 0>; + phy-names = "pcie-phy0"; + reset-gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&main_pmx0 { + usb0_pins_default: usb0-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ + >; + }; +}; + +&serdes0 { + status = "okay"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>; +}; + +&dwc3_0 { + status = "okay"; + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ + phys = <&serdes0 PHY_TYPE_USB3 0>; + phy-names = "usb3-phy"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_default>; + dr_mode = "host"; + maximum-speed = "super-speed"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; +}; + +&usb0_phy { + status = "okay"; +}; diff --git a/dts/src/arm64/ti/k3-am654.dtsi b/dts/src/arm64/ti/k3-am654.dtsi index 888567b921..bb77c84547 100644 --- a/dts/src/arm64/ti/k3-am654.dtsi +++ b/dts/src/arm64/ti/k3-am654.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for AM6 SoC family in Quad core configuration * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include "k3-am65.dtsi" diff --git a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi index 3864ec54e3..ae842b85b7 100644 --- a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi +++ b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) Siemens AG, 2018-2021 * diff --git a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts index bd6f2e696e..cc619bbec1 100644 --- a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) Siemens AG, 2018-2023 * @@ -15,17 +15,14 @@ #include "k3-am6548-iot2050-advanced-common.dtsi" #include "k3-am65-iot2050-common-pg2.dtsi" +#include "k3-am65-iot2050-arduino-connector.dtsi" +#include "k3-am65-iot2050-dp.dtsi" / { compatible = "siemens,iot2050-advanced-m2", "ti,am654"; model = "SIMATIC IOT2050 Advanced M2"; }; -&mcu_r5fss0 { - /* lock-step mode not supported on this board */ - ti,cluster-mode = <0>; -}; - &main_pmx0 { main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins { pinctrl-single,pins = < @@ -96,16 +93,3 @@ &pcie1_rc { status = "disabled"; }; - -&dwc3_0 { - assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ - <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ - /delete-property/ phys; - /delete-property/ phy-names; -}; - -&usb0 { - maximum-speed = "high-speed"; - /delete-property/ snps,dis-u1-entry-quirk; - /delete-property/ snps,dis-u2-entry-quirk; -}; diff --git a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts index f00dc86d01..ec721275e8 100644 --- a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts +++ b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) Siemens AG, 2018-2021 + * Copyright (c) Siemens AG, 2018-2023 * * Authors: * Le Jin <le.jin@siemens.com> @@ -17,13 +17,11 @@ #include "k3-am6548-iot2050-advanced-common.dtsi" #include "k3-am65-iot2050-common-pg2.dtsi" +#include "k3-am65-iot2050-arduino-connector.dtsi" +#include "k3-am65-iot2050-dp.dtsi" +#include "k3-am65-iot2050-usb3.dtsi" / { compatible = "siemens,iot2050-advanced-pg2", "ti,am654"; model = "SIMATIC IOT2050 Advanced PG2"; }; - -&mcu_r5fss0 { - /* lock-step mode not supported on this board */ - ti,cluster-mode = <0>; -}; diff --git a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-sm.dts b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-sm.dts new file mode 100644 index 0000000000..b829f4bcab --- /dev/null +++ b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-sm.dts @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Siemens AG, 2023 + * + * Authors: + * Baocheng Su <baocheng.su@siemens.com> + * Chao Zeng <chao.zeng@siemens.com> + * Huaqian Li <huaqian.li@siemens.com> + * + * AM6548-based (quad-core) IOT2050 SM variant, Product Generation 2 + * 4 GB RAM, 16 GB eMMC, USB-serial converter on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html + */ + +/dts-v1/; + +#include "k3-am6548-iot2050-advanced-common.dtsi" +#include "k3-am65-iot2050-common-pg2.dtsi" + +/ { + compatible = "siemens,iot2050-advanced-sm", "ti,am654"; + model = "SIMATIC IOT2050 Advanced SM"; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + aliases { + spi1 = &main_spi0; + }; + + leds { + pinctrl-0 = <&leds_pins_default>, <&user1_led_pins>; + + led-2 { + gpios = <&wkup_gpio0 52 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + gpios = <&wkup_gpio0 53 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&main_pmx0 { + main_pcie_enable_pins_default: main-pcie-enable-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x01d8, PIN_OUTPUT, 7) /* (AH12) GPIO1_22 */ + >; + }; + + main_spi0_pins: main-spi0-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ + AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ + AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */ + AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ + >; + }; +}; + +&main_pmx1 { + asic_spi_mux_ctrl_pin: asic-spi-mux-ctrl-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0010, PIN_OUTPUT, 7) /* (D21) GPIO1_86 */ + >; + }; +}; + +&wkup_pmx0 { + user1_led_pins: user1-led-default-pins { + pinctrl-single,pins = < + /* (AB1) WKUP_UART0_RXD:WKUP_GPIO0_52, as USER 1 led red */ + AM65X_WKUP_IOPAD(0x00a0, PIN_OUTPUT, 7) + /* (AB5) WKUP_UART0_TXD:WKUP_GPIO0_53, as USER 1 led green */ + AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 7) + >; + }; + + soc_asic_pins: soc-asic-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x004c, PIN_INPUT, 7) /* (P1) WKUP_GPIO0_31 */ + >; + }; +}; + +&main_gpio0 { + gpio-line-names = "main_gpio0-base"; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = + <&cp2102n_reset_pin_default>, + <&main_pcie_enable_pins_default>, + <&asic_spi_mux_ctrl_pin>; + gpio-line-names = + /* 0..9 */ + "", "", "", "", "", "", "", "", "", "", + /* 10..19 */ + "", "", "", "", "", "", "", "", "", "", + /* 20..29 */ + "", "", "", "", "CP2102N-RESET", "", "", "", "", "", + /* 30..39 */ + "", "", "", "", "", "", "", "", "", "", + /* 40..49 */ + "", "", "", "", "", "", "", "", "", "", + /* 50..59 */ + "", "", "", "", "", "", "", "", "", "", + /* 60..69 */ + "", "", "", "", "", "", "", "", "", "", + /* 70..79 */ + "", "", "", "", "", "", "", "", "", "", + /* 80..86 */ + "", "", "", "", "", "", "ASIC-spi-mux-ctrl"; +}; + +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = + <&push_button_pins_default>, + <&db9_com_mode_pins_default>, + <&soc_asic_pins>; + gpio-line-names = + /* 0..9 */ + "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", + "UART0-enable", "UART0-terminate", "", "WIFI-disable", + /* 10..19 */ + "", "", "", "", "", "", "", "", "", "", + /* 20..29 */ + "", "", "", "", "", "USER-button", "", "", "","ASIC-gpio-0", + /* 30..31 */ + "ASIC-gpio-1", "ASIC-gpio-2"; +}; + +&main_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi0_pins>; + + #address-cells = <1>; + #size-cells= <0>; +}; + +&mcu_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_spi0_pins_default>; +}; + +&main_i2c3 { + accelerometer: lsm6dso@6a { + compatible = "st,lsm6dso"; + reg = <0x6a>; + }; +}; + +&dss { + status = "disabled"; +}; + +&serdes0 { + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; +}; + +&serdes1 { + status = "disabled"; +}; + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_pins_default>; + + num-lanes = <1>; + phys = <&serdes0 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy0"; + reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie1_rc { + status = "disabled"; +}; diff --git a/dts/src/arm64/ti/k3-am6548-iot2050-advanced.dts b/dts/src/arm64/ti/k3-am6548-iot2050-advanced.dts index 077f165bdc..649652a540 100644 --- a/dts/src/arm64/ti/k3-am6548-iot2050-advanced.dts +++ b/dts/src/arm64/ti/k3-am6548-iot2050-advanced.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) Siemens AG, 2018-2021 * @@ -17,6 +17,7 @@ #include "k3-am6548-iot2050-advanced-common.dtsi" #include "k3-am65-iot2050-common-pg1.dtsi" +#include "k3-am65-iot2050-arduino-connector.dtsi" / { compatible = "siemens,iot2050-advanced", "ti,am654"; diff --git a/dts/src/arm64/ti/k3-am68-sk-base-board.dts b/dts/src/arm64/ti/k3-am68-sk-base-board.dts index d0cfdeac21..d743f023cd 100644 --- a/dts/src/arm64/ti/k3-am68-sk-base-board.dts +++ b/dts/src/arm64/ti/k3-am68-sk-base-board.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ * * Base Board: https://www.ti.com/lit/zip/SPRR463 */ @@ -169,6 +169,13 @@ }; }; }; + + csi_mux: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&exp3 1 GPIO_ACTIVE_HIGH>; + idle-state = <0>; + }; }; &main_pmx0 { @@ -186,6 +193,13 @@ >; }; + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0ac, PIN_INPUT, 13) /* (AC25) MCASP0_AXR15.I2C1_SCL */ + J721S2_IOPAD(0x0b0, PIN_INPUT, 13) /* (AD26) MCASP1_AXR3.I2C1_SDA */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ @@ -431,6 +445,42 @@ }; }; +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + status = "okay"; + + exp3: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn", + "IO_EXP_CSI2_EXP_RSTz","CSI0_B_GPIO1", + "CSI1_B_GPIO1"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + cam0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + cam1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + }; +}; + &main_i2c4 { status = "okay"; pinctrl-names = "default"; diff --git a/dts/src/arm64/ti/k3-am68-sk-som.dtsi b/dts/src/arm64/ti/k3-am68-sk-som.dtsi index 20861a0a46..0f4a5da0eb 100644 --- a/dts/src/arm64/ti/k3-am68-sk-som.dtsi +++ b/dts/src/arm64/ti/k3-am68-sk-som.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -209,51 +209,51 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c71_0 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; &c71_1 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>; + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; memory-region = <&c71_1_dma_memory_region>, <&c71_1_memory_region>; }; diff --git a/dts/src/arm64/ti/k3-am69-sk.dts b/dts/src/arm64/ti/k3-am69-sk.dts index 8da5915798..50de2a448a 100644 --- a/dts/src/arm64/ti/k3-am69-sk.dts +++ b/dts/src/arm64/ti/k3-am69-sk.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ * * Design Files: https://www.ti.com/lit/zip/SPRR466 * TRM: https://www.ti.com/lit/zip/spruj52 @@ -33,6 +33,7 @@ memory@80000000 { device_type = "memory"; + bootph-all; /* 32G RAM */ reg = <0x00 0x80000000 0x00 0x80000000>, <0x08 0x80000000 0x07 0x80000000>; @@ -321,6 +322,38 @@ }; }; }; + + csi_mux: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&exp2 1 GPIO_ACTIVE_HIGH>; + idle-state = <0>; + }; + + transceiver1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver2: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver3: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver4: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + }; &main_pmx0 { @@ -340,6 +373,13 @@ >; }; + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0ac, PIN_INPUT_PULLUP, 13) /* (AE34) MCASP0_AXR15.I2C1_SCL */ + J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 13) /* (AL33) MCASP1_AXR3.I2C1_SDA */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < @@ -429,6 +469,40 @@ J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */ >; }; + + main_mcan6_pins_default: main-mcan6-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x098, PIN_INPUT, 0) /* (AH36) MCAN6_RX */ + J784S4_IOPAD(0x094, PIN_OUTPUT, 0) /* (AG35) MCAN6_TX */ + >; + }; + + main_mcan7_pins_default: main-mcan7-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0A0, PIN_INPUT, 0) /* (AD34) MCAN7_RX */ + J784S4_IOPAD(0x09C, PIN_OUTPUT, 0) /* (AF35) MCAN7_TX */ + >; + }; + +}; + +&wkup_pmx0 { + bootph-all; + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ + J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ + >; + }; }; &wkup_pmx2 { @@ -525,6 +599,21 @@ J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */ >; }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ + J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0)/* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ + >; + }; + }; &wkup_pmx3 { @@ -646,7 +735,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + interrupts = <83 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic; @@ -774,6 +863,42 @@ }; }; +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + exp2: gpio@21 { + compatible = "ti,tca6408"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "CSI_VIO_SEL", "CSI_MUX_SEL_2", "CSI2_RSTz", + "IO_EXP_CAM0_GPIO1", "IO_EXP_CAM1_GPIO1"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + cam0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + cam1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + }; +}; + &main_sdhci0 { bootph-all; /* eMMC */ @@ -822,77 +947,77 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &main_r5fss2_core0 { - mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core0>; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>; memory-region = <&main_r5fss2_core0_dma_memory_region>, <&main_r5fss2_core0_memory_region>; }; &main_r5fss2_core1 { - mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core1>; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>; memory-region = <&main_r5fss2_core1_dma_memory_region>, <&main_r5fss2_core1_memory_region>; }; &c71_0 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; &c71_1 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>; + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; memory-region = <&c71_1_dma_memory_region>, <&c71_1_memory_region>; }; &c71_2 { status = "okay"; - mboxes = <&mailbox0_cluster5>, <&mbox_c71_2>; + mboxes = <&mailbox0_cluster5 &mbox_c71_2>; memory-region = <&c71_2_dma_memory_region>, <&c71_2_memory_region>; }; &c71_3 { status = "okay"; - mboxes = <&mailbox0_cluster5>, <&mbox_c71_3>; + mboxes = <&mailbox0_cluster5 &mbox_c71_3>; memory-region = <&c71_3_dma_memory_region>, <&c71_3_memory_region>; }; @@ -918,13 +1043,9 @@ pinctrl-names = "default"; pinctrl-0 = <&dss_vout0_pins_default>; assigned-clocks = <&k3_clks 218 2>, - <&k3_clks 218 5>, - <&k3_clks 218 14>, - <&k3_clks 218 18>; + <&k3_clks 218 5>; assigned-clock-parents = <&k3_clks 218 3>, - <&k3_clks 218 7>, - <&k3_clks 218 16>, - <&k3_clks 218 22>; + <&k3_clks 218 7>; }; &serdes_wiz4 { @@ -992,3 +1113,93 @@ }; }; }; + +&mcu_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; +}; + +&mcu_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver2>; +}; + +&main_mcan6 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan6_pins_default>; + phys = <&transceiver3>; +}; + +&main_mcan7 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan7_pins_default>; + phys = <&transceiver4>; +}; + +&ospi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + + partitions { + bootph-all; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + bootph-pre-ram; + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; diff --git a/dts/src/arm64/ti/k3-j7200-common-proc-board.dts b/dts/src/arm64/ti/k3-j7200-common-proc-board.dts index cee2b4b0eb..6593c5da82 100644 --- a/dts/src/arm64/ti/k3-j7200-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j7200-common-proc-board.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -88,27 +88,56 @@ states = <1800000 0x0>, <3300000 0x1>; }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 58 GPIO_ACTIVE_LOW>; + enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>; + enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; + mux-states = <&mux0 1>; + }; }; &wkup_pmx0 { +}; + +&wkup_pmx2 { mcu_uart0_pins_default: mcu-uart0-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ - J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ - J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ - J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ >; }; wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ - J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ >; }; -}; -&wkup_pmx2 { mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ @@ -138,6 +167,33 @@ J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x54, PIN_INPUT, 0) /* (A17) MCU_MCAN0_RX */ + J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (A16) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x6c, PIN_INPUT, 0) /* (B16) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (D13) WKUP_GPIO0_4.MCU_MCAN1_TX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x58, PIN_INPUT, 7) /* (B18) WKUP_GPIO0_0 */ + J721E_WKUP_IOPAD(0x40, PIN_INPUT, 7) /* (B17) MCU_SPI0_D1 */ + >; + }; + + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x60, PIN_INPUT, 7) /* (D14) WKUP_GPIO0_2 */ + >; + }; }; &main_pmx0 { @@ -189,6 +245,13 @@ J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ >; }; + + main_mcan3_pins_default: main-mcan3-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x3c, PIN_INPUT, 0) /* (W16) MCAN3_RX */ + J721E_IOPAD(0x38, PIN_OUTPUT, 0) /* (Y21) MCAN3_TX */ + >; + }; }; &main_pmx1 { @@ -210,7 +273,6 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; - clock-frequency = <96000000>; }; &main_uart0 { @@ -382,15 +444,30 @@ }; &pcie1_rc { + status = "okay"; reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; phys = <&serdes0_pcie_link>; phy-names = "pcie-phy"; num-lanes = <2>; }; -&pcie1_ep { - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - status = "disabled"; +&mcu_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; +}; + +&mcu_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver2>; +}; + +&main_mcan3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan3_pins_default>; + phys = <&transceiver3>; }; diff --git a/dts/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/dts/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso index 32d905235e..6432ca08ee 100644 --- a/dts/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso +++ b/dts/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso @@ -1,9 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with * J7200 board. * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-j7200-main.dtsi b/dts/src/arm64/ti/k3-j7200-main.dtsi index da67bf8fe7..657f9cc9f4 100644 --- a/dts/src/arm64/ti/k3-j7200-main.dtsi +++ b/dts/src/arm64/ti/k3-j7200-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J7200 SoC Family Main Domain peripherals * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ / { @@ -33,10 +33,11 @@ ranges = <0x00 0x00 0x00100000 0x1c000>; serdes_ln_ctrl: mux-controller@4080 { - compatible = "mmio-mux"; + compatible = "reg-mux"; + reg = <0x4080 0x20>; #mux-control-cells = <1>; - mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ - <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ + mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */ + <0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */ }; cpsw0_phy_gmii_sel: phy@4044 { @@ -47,9 +48,10 @@ }; usb_serdes_mux: mux-controller@4000 { - compatible = "mmio-mux"; + compatible = "reg-mux"; + reg = <0x4000 0x4>; #mux-control-cells = <1>; - mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ }; }; @@ -399,7 +401,7 @@ /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ main_timerio_input: pinctrl@104200 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x0 0x104200 0x0 0x50>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; @@ -408,7 +410,7 @@ /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ main_timerio_output: pinctrl@104280 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x0 0x104280 0x0 0x20>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; @@ -416,7 +418,7 @@ }; main_pmx0: pinctrl@11c000 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x11c000 0x00 0x10c>; #pinctrl-cells = <1>; @@ -425,7 +427,7 @@ }; main_pmx1: pinctrl@11c11c { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x11c11c 0x00 0xc>; #pinctrl-cells = <1>; @@ -770,26 +772,7 @@ ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie1_ep: pcie-ep@2910000 { - compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep"; - reg = <0x00 0x02910000 0x00 0x1000>, - <0x00 0x02917000 0x00 0x400>, - <0x00 0x0d800000 0x00 0x00800000>, - <0x00 0x18000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; - max-link-speed = <3>; - num-lanes = <4>; - power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 240 6>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; + status = "disabled"; }; usbss0: cdns-usb@4104000 { @@ -895,6 +878,276 @@ status = "disabled"; }; + main_mcan0: can@2701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02701000 0x00 0x200>, + <0x00 0x02708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 156 0>, <&k3_clks 156 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan1: can@2711000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02711000 0x00 0x200>, + <0x00 0x02718000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 158 0>, <&k3_clks 158 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan2: can@2721000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02721000 0x00 0x200>, + <0x00 0x02728000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 160 0>, <&k3_clks 160 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan3: can@2731000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02731000 0x00 0x200>, + <0x00 0x02738000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 161 0>, <&k3_clks 161 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan4: can@2741000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02741000 0x00 0x200>, + <0x00 0x02748000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 162 0>, <&k3_clks 162 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan5: can@2751000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02751000 0x00 0x200>, + <0x00 0x02758000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 163 0>, <&k3_clks 163 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan6: can@2761000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02761000 0x00 0x200>, + <0x00 0x02768000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 164 0>, <&k3_clks 164 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan7: can@2771000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02771000 0x00 0x200>, + <0x00 0x02778000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 165 0>, <&k3_clks 165 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan8: can@2781000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02781000 0x00 0x200>, + <0x00 0x02788000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 166 0>, <&k3_clks 166 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan9: can@2791000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02791000 0x00 0x200>, + <0x00 0x02798000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 167 0>, <&k3_clks 167 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan10: can@27a1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027a1000 0x00 0x200>, + <0x00 0x027a8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 168 0>, <&k3_clks 168 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan11: can@27b1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027b1000 0x00 0x200>, + <0x00 0x027b8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 169 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 169 0>, <&k3_clks 169 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan12: can@27c1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027c1000 0x00 0x200>, + <0x00 0x027c8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 170 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 170 0>, <&k3_clks 170 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan13: can@27d1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027d1000 0x00 0x200>, + <0x00 0x027d8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 171 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 171 0>, <&k3_clks 171 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan14: can@2681000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02681000 0x00 0x200>, + <0x00 0x02688000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 150 0>, <&k3_clks 150 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan15: can@2691000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02691000 0x00 0x200>, + <0x00 0x02698000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 151 0>, <&k3_clks 151 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan16: can@26a1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x026a1000 0x00 0x200>, + <0x00 0x026a8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 152 0>, <&k3_clks 152 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan17: can@26b1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x026b1000 0x00 0x200>, + <0x00 0x026b8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 0>, <&k3_clks 153 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + main_spi0: spi@2100000 { compatible = "ti,am654-mcspi","ti,omap4-mcspi"; reg = <0x00 0x02100000 0x00 0x400>; diff --git a/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi index 60b26374ae..7cf21c9995 100644 --- a/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -192,7 +192,7 @@ /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ mcu_timerio_input: pinctrl@40f04200 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x0 0x40f04200 0x0 0x28>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; @@ -202,7 +202,7 @@ /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ mcu_timerio_output: pinctrl@40f04280 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x0 0x40f04280 0x0 0x28>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; @@ -211,7 +211,7 @@ }; wkup_pmx0: pinctrl@4301c000 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c000 0x00 0x34>; #pinctrl-cells = <1>; @@ -220,7 +220,7 @@ }; wkup_pmx1: pinctrl@4301c038 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c038 0x00 0x8>; #pinctrl-cells = <1>; @@ -229,7 +229,7 @@ }; wkup_pmx2: pinctrl@4301c068 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c068 0x00 0xec>; #pinctrl-cells = <1>; @@ -238,7 +238,7 @@ }; wkup_pmx3: pinctrl@4301c174 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c174 0x00 0x20>; #pinctrl-cells = <1>; @@ -518,17 +518,18 @@ status = "disabled"; }; - fss: syscon@47000000 { - compatible = "syscon", "simple-mfd"; + fss: bus@47000000 { + compatible = "simple-bus"; reg = <0x00 0x47000000 0x00 0x100>; #address-cells = <2>; #size-cells = <2>; ranges; - hbmc_mux: hbmc-mux { - compatible = "mmio-mux"; + hbmc_mux: mux-controller@47000004 { + compatible = "reg-mux"; + reg = <0x00 0x47000004 0x00 0x4>; #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* HBMC select */ + mux-reg-masks = <0x0 0x2>; /* HBMC select */ }; hbmc: hyperbus@47034000 { @@ -655,4 +656,34 @@ ti,esm-pins = <95>; bootph-pre-ram; }; + + mcu_mcan0: can@40528000 { + compatible = "bosch,m_can"; + reg = <0x00 0x40528000 0x00 0x200>, + <0x00 0x40500000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 172 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 172 0>, <&k3_clks 172 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + mcu_mcan1: can@40568000 { + compatible = "bosch,m_can"; + reg = <0x00 0x40568000 0x00 0x200>, + <0x00 0x40540000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 173 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 173 0>, <&k3_clks 173 2>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; }; diff --git a/dts/src/arm64/ti/k3-j7200-som-p0.dtsi b/dts/src/arm64/ti/k3-j7200-som-p0.dtsi index ea47f10d39..7e6a584ac6 100644 --- a/dts/src/arm64/ti/k3-j7200-som-p0.dtsi +++ b/dts/src/arm64/ti/k3-j7200-som-p0.dtsi @@ -1,10 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> + #include "k3-j7200.dtsi" / { @@ -80,6 +82,25 @@ no-map; }; }; + + mux0: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>; + }; + + mux1: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>; + }; + + transceiver0: can-phy0 { + /* standby pin has been grounded by default */ + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; }; &wkup_pmx0 { @@ -142,6 +163,13 @@ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ >; }; + + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x24, PIN_INPUT, 0) /* (V20) MCAN0_RX */ + J721E_IOPAD(0x20, PIN_OUTPUT, 0) /* (V18) MCAN0_TX */ + >; + }; }; &hbmc { @@ -222,25 +250,25 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; @@ -478,3 +506,10 @@ }; }; }; + +&main_mcan0 { + status = "okay"; + pinctrl-0 = <&main_mcan0_pins_default>; + pinctrl-names = "default"; + phys = <&transceiver0>; +}; diff --git a/dts/src/arm64/ti/k3-j7200-thermal.dtsi b/dts/src/arm64/ti/k3-j7200-thermal.dtsi index e7e3a643a6..2d22a95a6f 100644 --- a/dts/src/arm64/ti/k3-j7200-thermal.dtsi +++ b/dts/src/arm64/ti/k3-j7200-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-j7200.dtsi b/dts/src/arm64/ti/k3-j7200.dtsi index ef73e6d7e8..d411911fdf 100644 --- a/dts/src/arm64/ti/k3-j7200.dtsi +++ b/dts/src/arm64/ti/k3-j7200.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J7200 SoC Family * - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/src/arm64/ti/k3-j721e-beagleboneai64.dts b/dts/src/arm64/ti/k3-j721e-beagleboneai64.dts index 2f954729f3..a2925555fe 100644 --- a/dts/src/arm64/ti/k3-j721e-beagleboneai64.dts +++ b/dts/src/arm64/ti/k3-j721e-beagleboneai64.dts @@ -1,9 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * https://beagleboard.org/ai-64 - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation - * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Jason Kridner, BeagleBoard.org Foundation + * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation */ /dts-v1/; @@ -936,58 +936,58 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; + mboxes = <&mailbox0_cluster3 &mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; + mboxes = <&mailbox0_cluster3 &mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts index fe5207ac7d..8230d53cd6 100644 --- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2019-2024 Texas Instruments Incorporated - https://www.ti.com/ * * Product Link: https://www.ti.com/tool/J721EXCPXEVM */ diff --git a/dts/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso b/dts/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso index 6a7d37575d..f84aa9f945 100644 --- a/dts/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso +++ b/dts/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso @@ -1,11 +1,11 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT Overlay for CPSW9G in RGMII mode using J7 GESI EXP BRD board with * J721E board. * * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso b/dts/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso index 0c82a13b65..4062709d65 100644 --- a/dts/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso +++ b/dts/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso @@ -1,11 +1,11 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the * J7 common processor board. * * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/dts/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso index d4c51ffc3d..8376fa4b6e 100644 --- a/dts/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso +++ b/dts/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso @@ -1,9 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with * J721E board. * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi index 2569b4c08f..c7eafbc862 100644 --- a/dts/src/arm64/ti/k3-j721e-main.dtsi +++ b/dts/src/arm64/ti/k3-j721e-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J721E SoC Family Main Domain peripherals * - * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/phy/phy.h> #include <dt-bindings/phy/phy-ti.h> @@ -45,15 +45,15 @@ ranges = <0x0 0x0 0x00100000 0x1c000>; serdes_ln_ctrl: mux-controller@4080 { - compatible = "mmio-mux"; - reg = <0x00004080 0x50>; + compatible = "reg-mux"; + reg = <0x4080 0x50>; #mux-control-cells = <1>; - mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ - <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ - <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ - <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */ - <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>; - /* SERDES4 lane0/1/2/3 select */ + mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */ + <0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */ + <0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */ + <0x30 0x3>, <0x34 0x3>, /* SERDES3 lane0/1 select */ + <0x40 0x3>, <0x44 0x3>, /* SERDES4 lane0/1 select */ + <0x48 0x3>, <0x4c 0x3>; /* SERDES4 lane2/3 select */ idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>, <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>, @@ -70,10 +70,11 @@ }; usb_serdes_mux: mux-controller@4000 { - compatible = "mmio-mux"; + compatible = "reg-mux"; + reg = <0x4000 0x20>; #mux-control-cells = <1>; - mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */ - <0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */ + mux-reg-masks = <0x0 0x8000000>, /* USB0 to SERDES0/3 mux */ + <0x10 0x8000000>; /* USB1 to SERDES1/2 mux */ }; ehrpwm_tbclk: clock-controller@4140 { @@ -572,6 +573,128 @@ pinctrl-single,function-mask = <0x0000001f>; }; + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x0 0x4500000 0x0 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_udmap 0x4940>; + dma-names = "rx0"; + power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@4504000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x0 0x4504000 0x0 0x1000>; + clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>, + <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + ti_csi2rx1: ticsi2rx@4510000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x0 0x4510000 0x0 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_udmap 0x4960>; + dma-names = "rx0"; + power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx1: csi-bridge@4514000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x0 0x4514000 0x0 0x1000>; + clocks = <&k3_clks 27 2>, <&k3_clks 27 0>, <&k3_clks 27 2>, + <&k3_clks 27 2>, <&k3_clks 27 3>, <&k3_clks 27 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy1>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi1_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi1_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi1_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi1_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi1_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@4580000 { + compatible = "cdns,dphy-rx"; + reg = <0x0 0x4580000 0x0 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + dphy1: phy@4590000 { + compatible = "cdns,dphy-rx"; + reg = <0x0 0x4590000 0x0 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + serdes_wiz0: wiz@5000000 { compatible = "ti,j721e-wiz-16g"; #address-cells = <1>; diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi index a74912d9e4..4618b697fb 100644 --- a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -353,9 +353,9 @@ hbmc_mux: mux-controller@47000004 { compatible = "reg-mux"; - reg = <0x00 0x47000004 0x00 0x2>; + reg = <0x00 0x47000004 0x00 0x4>; #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* HBMC select */ + mux-reg-masks = <0x0 0x2>; /* HBMC select */ }; hbmc: hyperbus@47034000 { diff --git a/dts/src/arm64/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/dts/src/arm64/ti/k3-j721e-sk-csi2-dual-imx219.dtso new file mode 100644 index 0000000000..47bb5480b5 --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-sk-csi2-dual-imx219.dtso @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT Overlay for dual RPi Camera V2.1 (Sony IMX219) interfaced with CSI2 + * on J721E SK, AM68 SK or AM69-SK board. + * https://datasheets.raspberrypi.org/camera/camera-v2-schematic.pdf + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "k3-pinctrl.h" + +&{/} { + clk_imx219_fixed: imx219-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&csi_mux { + idle-state = <1>; +}; + +/* CAM0 I2C */ +&cam0_i2c { + #address-cells = <1>; + #size-cells = <0>; + imx219_0: imx219-0@10 { + compatible = "sony,imx219"; + reg = <0x10>; + + clocks = <&clk_imx219_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + link-frequencies = /bits/ 64 <456000000>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +/* CAM1 I2C */ +&cam1_i2c { + #address-cells = <1>; + #size-cells = <0>; + imx219_1: imx219-1@10 { + compatible = "sony,imx219"; + reg = <0x10>; + + clocks = <&clk_imx219_fixed>; + clock-names = "xclk"; + + port { + csi2_cam1: endpoint { + remote-endpoint = <&csi2rx1_in_sensor>; + link-frequencies = /bits/ 64 <456000000>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; +}; + +&dphy0 { + status = "okay"; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&cdns_csi2rx1 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi1_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx1_in_sensor: endpoint { + remote-endpoint = <&csi2_cam1>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + + csi1_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi1_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi1_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi1_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; +}; + +&dphy1 { + status = "okay"; +}; + +&ti_csi2rx1 { + status = "okay"; +}; diff --git a/dts/src/arm64/ti/k3-j721e-sk.dts b/dts/src/arm64/ti/k3-j721e-sk.dts index 188dfe291a..0c4575ad8d 100644 --- a/dts/src/arm64/ti/k3-j721e-sk.dts +++ b/dts/src/arm64/ti/k3-j721e-sk.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ * * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM */ @@ -286,6 +286,15 @@ }; }; }; + + csi_mux: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&main_gpio0 88 GPIO_ACTIVE_HIGH>; + idle-state = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_csi_mux_sel_pins_default>; + }; }; &main_pmx0 { @@ -352,6 +361,12 @@ >; }; + main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ + >; + }; + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ @@ -574,7 +589,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic; @@ -651,7 +666,7 @@ reg = <0x4c>; system-power-controller; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; buck1234-supply = <&vsys_3v3>; @@ -858,14 +873,14 @@ reg = <0x70>; /* CSI0 I2C */ - i2c@0 { + cam0_i2c: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; /* CSI1 I2C */ - i2c@1 { + cam1_i2c: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -1168,58 +1183,58 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; + mboxes = <&mailbox0_cluster3 &mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; + mboxes = <&mailbox0_cluster3 &mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi index a75611eec7..1fae6495db 100644 --- a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi +++ b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2019-2024 Texas Instruments Incorporated - https://www.ti.com/ * * Product Link: https://www.ti.com/tool/J721EXSOMXEVM */ @@ -549,58 +549,58 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; + mboxes = <&mailbox0_cluster3 &mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; + mboxes = <&mailbox0_cluster3 &mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/dts/src/arm64/ti/k3-j721e-thermal.dtsi b/dts/src/arm64/ti/k3-j721e-thermal.dtsi index c252327900..927f7614ae 100644 --- a/dts/src/arm64/ti/k3-j721e-thermal.dtsi +++ b/dts/src/arm64/ti/k3-j721e-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-j721e.dtsi b/dts/src/arm64/ti/k3-j721e.dtsi index a200810df5..5a72c518ce 100644 --- a/dts/src/arm64/ti/k3-j721e.dtsi +++ b/dts/src/arm64/ti/k3-j721e.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J721E SoC Family * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts index c6b85bbf9a..c5a0b7cbb1 100644 --- a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ * * Common Processor Board: https://www.ti.com/tool/J721EXCPXEVM */ @@ -147,6 +147,13 @@ >; }; + main_i2c5_pins_default: main-i2c5-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x01c, PIN_INPUT, 8) /* (Y24) MCAN15_TX.I2C5_SCL */ + J721S2_IOPAD(0x018, PIN_INPUT, 8) /* (W23) MCAN14_RX.I2C5_SDA */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ @@ -190,8 +197,6 @@ &wkup_pmx2 { wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ >; @@ -356,6 +361,24 @@ }; }; +&main_i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c5_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + exp5: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0", + "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO2", + "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2", + "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4"; + }; +}; + &main_sdhci0 { /* eMMC */ status = "okay"; diff --git a/dts/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso b/dts/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso index b78feea31b..1be28283c7 100644 --- a/dts/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso +++ b/dts/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso @@ -1,10 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT Overlay for MAIN CPSW2G using GESI Expansion Board with J7 common processor board. * * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso b/dts/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso index 43568eb67d..5ff390915b 100644 --- a/dts/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso +++ b/dts/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso @@ -1,11 +1,11 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /** * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the * J7 common processor board. * * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-j721s2-main.dtsi b/dts/src/arm64/ti/k3-j721s2-main.dtsi index ea7f2b2ab1..b70c8615e3 100644 --- a/dts/src/arm64/ti/k3-j721s2-main.dtsi +++ b/dts/src/arm64/ti/k3-j721s2-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J721S2 SoC Family Main Domain peripherals * - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/phy/phy-cadence.h> @@ -45,7 +45,7 @@ ranges = <0x00 0x00 0x00104000 0x18000>; usb_serdes_mux: mux-controller@0 { - compatible = "mmio-mux"; + compatible = "reg-mux"; reg = <0x0 0x4>; #mux-control-cells = <1>; mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ @@ -58,11 +58,11 @@ }; serdes_ln_ctrl: mux-controller@80 { - compatible = "mmio-mux"; + compatible = "reg-mux"; reg = <0x80 0x10>; #mux-control-cells = <1>; - mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */ - <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */ + mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */ + <0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */ }; ehrpwm_tbclk: clock-controller@140 { @@ -716,6 +716,14 @@ status = "disabled"; }; + vpu: video-codec@4210000 { + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; + reg = <0x00 0x4210000 0x00 0x10000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 179 2>; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + }; + main_sdhci0: mmc@4f80000 { compatible = "ti,j721e-sdhci-8bit"; reg = <0x00 0x04f80000 0x00 0x1000>, @@ -1122,7 +1130,6 @@ ti,sci-dev-id = <225>; ti,sci-rm-range-rchan = <0x21>; ti,sci-rm-range-tchan = <0x22>; - status = "disabled"; }; cpts@310d0000 { @@ -1233,6 +1240,128 @@ }; }; + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x00 0x04500000 0x00 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_bcdma_csi 0 0x4940 0>; + dma-names = "rx0"; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@4504000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x04504000 0x00 0x1000>; + clocks = <&k3_clks 38 3>, <&k3_clks 38 1>, <&k3_clks 38 3>, + <&k3_clks 38 3>, <&k3_clks 38 4>, <&k3_clks 38 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + ti_csi2rx1: ticsi2rx@4510000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x00 0x04510000 0x00 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_bcdma_csi 0 0x4960 0>; + dma-names = "rx0"; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx1: csi-bridge@4514000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x04514000 0x00 0x1000>; + clocks = <&k3_clks 39 3>, <&k3_clks 39 1>, <&k3_clks 39 3>, + <&k3_clks 39 3>, <&k3_clks 39 4>, <&k3_clks 39 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy1>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi1_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi1_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi1_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi1_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi1_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@4580000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x04580000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + dphy1: phy@4590000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x04590000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + serdes_wiz0: wiz@5060000 { compatible = "ti,j721s2-wiz-10g"; #address-cells = <1>; diff --git a/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi index 80aa33c58a..eaf7f70944 100644 --- a/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -663,7 +663,7 @@ compatible = "ti,j7200-vtm"; reg = <0x00 0x42040000 0x0 0x350>, <0x00 0x42050000 0x0 0x350>; - power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>; #thermal-sensor-cells = <1>; }; diff --git a/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi b/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi index da3237b23b..623c842152 100644 --- a/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi +++ b/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * SoM: https://www.ti.com/lit/zip/sprr439 * - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -504,51 +504,51 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c71_0 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; &c71_1 { status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>; + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; memory-region = <&c71_1_dma_memory_region>, <&c71_1_memory_region>; }; diff --git a/dts/src/arm64/ti/k3-j721s2-thermal.dtsi b/dts/src/arm64/ti/k3-j721s2-thermal.dtsi index f7b1a15b8f..e3ef61c165 100644 --- a/dts/src/arm64/ti/k3-j721s2-thermal.dtsi +++ b/dts/src/arm64/ti/k3-j721s2-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-j721s2.dtsi b/dts/src/arm64/ti/k3-j721s2.dtsi index 1f636acd4e..be4502fe1c 100644 --- a/dts/src/arm64/ti/k3-j721s2.dtsi +++ b/dts/src/arm64/ti/k3-j721s2.dtsi @@ -1,10 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J721S2 SoC Family * * TRM (SPRUJ28 NOVEMBER 2021): https://www.ti.com/lit/pdf/spruj28 * - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ * */ diff --git a/dts/src/arm64/ti/k3-j722s-evm.dts b/dts/src/arm64/ti/k3-j722s-evm.dts new file mode 100644 index 0000000000..cee3a8661d --- /dev/null +++ b/dts/src/arm64/ti/k3-j722s-evm.dts @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree file for the J722S EVM + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + * + * Schematics: https://www.ti.com/lit/zip/sprr495 + */ + +/dts-v1/; + +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j722s.dtsi" + +/ { + compatible = "ti,j722s-evm", "ti,j722s"; + model = "Texas Instruments J722S EVM"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 8G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000001 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + }; + + vmain_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vsys_5v0: regulator-vsys5v0 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-mmc1 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&exp1 15 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vdd_sd_dv: regulator-TLV71033 { + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio0 70 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + vsys_io_1v8: regulator-vsys-io-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-vsys-io-1v2 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + >; + bootph-all; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ + >; + bootph-all; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */ + J722S_IOPAD(0x002c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */ + J722S_IOPAD(0x000c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */ + J722S_IOPAD(0x0010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */ + J722S_IOPAD(0x0014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */ + J722S_IOPAD(0x0018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */ + J722S_IOPAD(0x001c, PIN_INPUT, 0) /* (L21) OSPI0_D4 */ + J722S_IOPAD(0x0020, PIN_INPUT, 0) /* (M26) OSPI0_D5 */ + J722S_IOPAD(0x0024, PIN_INPUT, 0) /* (N27) OSPI0_D6 */ + J722S_IOPAD(0x0028, PIN_INPUT, 0) /* (M27) OSPI0_D7 */ + J722S_IOPAD(0x0008, PIN_INPUT, 0) /* (L22) OSPI0_DQS */ + >; + bootph-all; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; + bootph-all; +}; + +&mcu_pmx0 { + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ + >; + bootph-all; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; + bootph-all; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + bootph-all; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + bootph-all; + + exp1: gpio@23 { + compatible = "ti,tca6424"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "TRC_MUX_SEL", "OSPI/ONAND_MUX_SEL", + "MCASP1_FET_SEL", "CTRL_PM_I2C_OE#", + "CSI_VIO_SEL", "USB2.0_MUX_SEL", + "CSI01_MUX_SEL_2", "CSI23_MUX_SEL_2", + "LMK1_OE1", "LMK1_OE0", + "LMK2_OE0", "LMK2_OE1", + "GPIO_RGMII1_RST#", "GPIO_AUD_RSTn", + "GPIO_eMMC_RSTn", "GPIO_uSD_PWR_EN", + "USER_LED2", "MCAN0_STB", + "PCIe0_1L_RC_RSTz", "PCIe0_1L_PRSNT#", + "ENET1_EXP_SPARE2", "ENET1_EXP_PWRDN", + "PD_I2ENET1_I2CMUX_SELC_IRQ", "ENET1_EXP_RESETZ"; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + bootph-all; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x00 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; + +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; + status = "okay"; + bootph-all; +}; diff --git a/dts/src/arm64/ti/k3-j722s.dtsi b/dts/src/arm64/ti/k3-j722s.dtsi new file mode 100644 index 0000000000..c75744edb1 --- /dev/null +++ b/dts/src/arm64/ti/k3-j722s.dtsi @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source for J722S SoC Family + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +#include "k3-am62p5.dtsi" + +/ { + model = "Texas Instruments K3 J722S SoC"; + compatible = "ti,j722s"; + + cbass_main: bus@f0000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */ + <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */ + <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ + <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_0 */ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ + <0x00 0x0fd80000 0x00 0x0fd80000 0x00 0x00080000>, /* GPU */ + <0x00 0x0fd20000 0x00 0x0fd20000 0x00 0x00000100>, /* JPEGENC0_CORE */ + <0x00 0x0fd20200 0x00 0x0fd20200 0x00 0x00000200>, /* JPEGENC0_CORE_MMU */ + <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ + <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ + <0x00 0x301C0000 0x00 0x301C0000 0x00 0x00001000>, /* DPHY-TX */ + <0x00 0x30101000 0x00 0x30101000 0x00 0x00080100>, /* CSI window */ + <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ + <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */ + <0x00 0x30220000 0x00 0x30220000 0x00 0x00010000>, /* DSS1 */ + <0x00 0x30270000 0x00 0x30270000 0x00 0x00010000>, /* DSI-base1 */ + <0x00 0x30500000 0x00 0x30500000 0x00 0x00100000>, /* DSI-base2 */ + <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ + <0x00 0x31200000 0x00 0x31200000 0x00 0x00040000>, /* USB1 DWC3 Core window */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ + <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ + <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ + <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ + <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */ + <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ + <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe0 DAT0 */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00040000>, /* OCSRAM */ + <0x00 0x78400000 0x00 0x78400000 0x00 0x00008000>, /* MAIN R5FSS0 ATCM */ + <0x00 0x78500000 0x00 0x78500000 0x00 0x00008000>, /* MAIN R5FSS0 BTCM */ + <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00200000>, /* C7X_0 L2SRAM */ + <0x00 0x7e200000 0x00 0x7e200000 0x00 0x00200000>, /* C7X_1 L2SRAM */ + <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ + <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */ + + /* MCU Domain Range */ + <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, + + /* Wakeup Domain Range */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; + }; +}; + +/* Main domain overrides */ + +&inta_main_dmss { + ti,interrupt-ranges = <7 71 21>; +}; + +&oc_sram { + reg = <0x00 0x70000000 0x00 0x40000>; + ranges = <0x00 0x00 0x70000000 0x40000>; +}; diff --git a/dts/src/arm64/ti/k3-j784s4-evm.dts b/dts/src/arm64/ti/k3-j784s4-evm.dts index f34b92acc5..81fd7afac8 100644 --- a/dts/src/arm64/ti/k3-j784s4-evm.dts +++ b/dts/src/arm64/ti/k3-j784s4-evm.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ * * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458 */ @@ -31,6 +31,7 @@ memory@80000000 { device_type = "memory"; + bootph-all; /* 32G RAM */ reg = <0x00 0x80000000 0x00 0x80000000>, <0x08 0x80000000 0x07 0x80000000>; @@ -296,6 +297,13 @@ >; }; + main_i2c5_pins_default: main-i2c5-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ + J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < @@ -335,8 +343,6 @@ wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ >; @@ -760,6 +766,24 @@ }; }; +&main_i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c5_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + exp5: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0", + "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3", + "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2", + "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4"; + }; +}; + &main_sdhci0 { bootph-all; /* eMMC */ diff --git a/dts/src/arm64/ti/k3-j784s4-main.dtsi b/dts/src/arm64/ti/k3-j784s4-main.dtsi index f2b720ed1e..b67c37460a 100644 --- a/dts/src/arm64/ti/k3-j784s4-main.dtsi +++ b/dts/src/arm64/ti/k3-j784s4-main.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J784S4 SoC Family Main Domain peripherals * - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/mux/mux.h> @@ -52,12 +52,12 @@ compatible = "reg-mux"; reg = <0x00004080 0x30>; #mux-control-cells = <1>; - mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ - <0x4088 0x3>, <0x408c 0x3>, /* SERDES0 lane2/3 select */ - <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ - <0x4098 0x3>, <0x409c 0x3>, /* SERDES1 lane2/3 select */ - <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ - <0x40a8 0x3>, <0x40ac 0x3>; /* SERDES2 lane2/3 select */ + mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */ + <0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */ + <0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */ + <0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */ + <0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */ + <0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */ idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, <J784S4_SERDES0_LANE2_IP3_UNUSED>, @@ -662,6 +662,204 @@ status = "disabled"; }; + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x00 0x04500000 0x00 0x00001000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_bcdma_csi 0 0x4940 0>; + dma-names = "rx0"; + power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@4504000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x04504000 0x00 0x00001000>; + clocks = <&k3_clks 72 2>, <&k3_clks 72 0>, <&k3_clks 72 2>, + <&k3_clks 72 2>, <&k3_clks 72 3>, <&k3_clks 72 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + ti_csi2rx1: ticsi2rx@4510000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x00 0x04510000 0x00 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_bcdma_csi 0 0x4960 0>; + dma-names = "rx0"; + power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx1: csi-bridge@4514000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x04514000 0x00 0x00001000>; + clocks = <&k3_clks 73 2>, <&k3_clks 73 0>, <&k3_clks 73 2>, + <&k3_clks 73 2>, <&k3_clks 73 3>, <&k3_clks 73 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy1>; + phy-names = "dphy"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi1_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi1_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi1_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi1_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi1_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + ti_csi2rx2: ticsi2rx@4520000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x00 0x04520000 0x00 0x00001000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_bcdma_csi 0 0x4980 0>; + dma-names = "rx0"; + power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx2: csi-bridge@4524000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x04524000 0x00 0x00001000>; + clocks = <&k3_clks 74 2>, <&k3_clks 74 0>, <&k3_clks 74 2>, + <&k3_clks 74 2>, <&k3_clks 74 3>, <&k3_clks 74 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy2>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi2_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi2_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi2_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi2_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@4580000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x04580000 0x00 0x00001100>; + #phy-cells = <0>; + power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + dphy1: phy@4590000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x04590000 0x00 0x00001100>; + #phy-cells = <0>; + power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + dphy2: phy@45a0000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x045a0000 0x00 0x00001100>; + #phy-cells = <0>; + power-domains = <&k3_pds 214 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + vpu0: video-codec@4210000 { + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; + reg = <0x00 0x4210000 0x00 0x10000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 241 2>; + power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; + }; + + vpu1: video-codec@4220000 { + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; + reg = <0x00 0x4220000 0x00 0x10000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 242 2>; + power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; + }; + main_sdhci0: mmc@4f80000 { compatible = "ti,j721e-sdhci-8bit"; reg = <0x00 0x04f80000 0x00 0x1000>, @@ -1224,7 +1422,6 @@ ti,sci-dev-id = <281>; ti,sci-rm-range-rchan = <0x21>; ti,sci-rm-range-tchan = <0x22>; - status = "disabled"; }; cpts@310d0000 { diff --git a/dts/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi index 3902a921d7..77a8d99139 100644 --- a/dts/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi @@ -1,8 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -628,7 +628,7 @@ compatible = "ti,j7200-vtm"; reg = <0x00 0x42040000 0x00 0x350>, <0x00 0x42050000 0x00 0x350>; - power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + power-domains = <&k3_pds 243 TI_SCI_PD_SHARED>; #thermal-sensor-cells = <1>; }; diff --git a/dts/src/arm64/ti/k3-j784s4-thermal.dtsi b/dts/src/arm64/ti/k3-j784s4-thermal.dtsi index f7b1a15b8f..e3ef61c165 100644 --- a/dts/src/arm64/ti/k3-j784s4-thermal.dtsi +++ b/dts/src/arm64/ti/k3-j784s4-thermal.dtsi @@ -1,4 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm64/ti/k3-j784s4.dtsi b/dts/src/arm64/ti/k3-j784s4.dtsi index 4398c3a463..6e2e92ffe7 100644 --- a/dts/src/arm64/ti/k3-j784s4.dtsi +++ b/dts/src/arm64/ti/k3-j784s4.dtsi @@ -1,10 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree Source for J784S4 SoC Family * * TRM (SPRUJ43 JULY 2022): https://www.ti.com/lit/zip/spruj52 * - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ * */ @@ -235,6 +235,8 @@ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ + <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */ + <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */ <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */ diff --git a/dts/src/arm64/ti/k3-pinctrl.h b/dts/src/arm64/ti/k3-pinctrl.h index 2a4e0e084d..4cd2df467d 100644 --- a/dts/src/arm64/ti/k3-pinctrl.h +++ b/dts/src/arm64/ti/k3-pinctrl.h @@ -1,9 +1,9 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ /* * This header provides constants for pinctrl bindings for TI's K3 SoC * family. * - * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef DTS_ARM64_TI_K3_PINCTRL_H #define DTS_ARM64_TI_K3_PINCTRL_H @@ -59,6 +59,9 @@ #define J721S2_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J721S2_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J722S_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J722S_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + #define J784S4_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J784S4_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) diff --git a/dts/src/arm64/ti/k3-serdes.h b/dts/src/arm64/ti/k3-serdes.h index 21b4886c47..a011ad893b 100644 --- a/dts/src/arm64/ti/k3-serdes.h +++ b/dts/src/arm64/ti/k3-serdes.h @@ -1,8 +1,8 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ /* * This header provides constants for SERDES MUX for TI SoCs * - * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef DTS_ARM64_TI_K3_SERDES_H diff --git a/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi b/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi index ccaca29200..dd4569e7bd 100644 --- a/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi +++ b/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi @@ -230,18 +230,30 @@ &uart0 { clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>; + assigned-clocks = <&zynqmp_clk UART0_REF>; }; &uart1 { clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>; + assigned-clocks = <&zynqmp_clk UART1_REF>; }; -&dwc3_0 { +&usb0 { clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; + assigned-clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; }; -&dwc3_1 { +&dwc3_0 { + clocks = <&zynqmp_clk USB3_DUAL_REF>; +}; + +&usb1 { clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; + assigned-clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; +}; + +&dwc3_1 { + clocks = <&zynqmp_clk USB3_DUAL_REF>; }; &watchdog0 { diff --git a/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso b/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso index 92f4190d56..d7535a77b4 100644 --- a/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso +++ b/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso @@ -139,7 +139,7 @@ bus-width = <4>; }; -&gem3 { /* required by spec */ +&gem3 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; @@ -166,9 +166,28 @@ }; }; -&pinctrl0 { /* required by spec */ +&pinctrl0 { status = "okay"; + pinctrl_gpio0_default: gpio0-default { + conf { + groups = "gpio0_38_grp"; + bias-pull-up; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "gpio0_38_grp"; + function = "gpio0"; + }; + + conf-tx { + pins = "MIO38"; + bias-disable; + output-enable; + }; + }; + pinctrl_uart1_default: uart1-default { conf { groups = "uart1_9_grp"; @@ -185,6 +204,7 @@ conf-tx { pins = "MIO36"; bias-disable; + output-enable; }; mux { @@ -207,7 +227,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { conf { groups = "gpio0_24_grp", "gpio0_25_grp"; slew-rate = <SLEW_RATE_SLOW>; @@ -236,6 +256,7 @@ conf-bootstrap { pins = "MIO71", "MIO73", "MIO75"; bias-disable; + output-enable; low-power-disable; }; @@ -243,6 +264,7 @@ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", "MIO69"; bias-disable; + output-enable; low-power-enable; }; @@ -251,6 +273,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; mux-mdio { @@ -281,6 +304,7 @@ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + output-enable; drive-strength = <4>; slew-rate = <SLEW_RATE_SLOW>; }; @@ -319,6 +343,12 @@ }; }; +&gpio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &uart1 { status = "okay"; pinctrl-names = "default"; diff --git a/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso b/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso index f88b71f5b0..a7b8fffad4 100644 --- a/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/dts/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -94,6 +94,7 @@ pinctrl-0 = <&pinctrl_usb0_default>; phy-names = "usb3-phy"; phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + assigned-clock-rates = <250000000>, <20000000>; }; &dwc3_0 { @@ -122,7 +123,7 @@ bus-width = <4>; }; -&gem3 { /* required by spec */ +&gem3 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; @@ -149,9 +150,28 @@ }; }; -&pinctrl0 { /* required by spec */ +&pinctrl0 { status = "okay"; + pinctrl_gpio0_default: gpio0-default { + conf { + groups = "gpio0_38_grp"; + bias-pull-up; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "gpio0_38_grp"; + function = "gpio0"; + }; + + conf-tx { + pins = "MIO38"; + bias-disable; + output-enable; + }; + }; + pinctrl_uart1_default: uart1-default { conf { groups = "uart1_9_grp"; @@ -168,6 +188,7 @@ conf-tx { pins = "MIO36"; bias-disable; + output-enable; }; mux { @@ -190,7 +211,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { conf { groups = "gpio0_24_grp", "gpio0_25_grp"; slew-rate = <SLEW_RATE_SLOW>; @@ -219,6 +240,7 @@ conf-bootstrap { pins = "MIO71", "MIO73", "MIO75"; bias-disable; + output-enable; low-power-disable; }; @@ -226,6 +248,7 @@ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", "MIO69"; bias-disable; + output-enable; low-power-enable; }; @@ -234,6 +257,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; mux-mdio { @@ -264,6 +288,7 @@ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + output-enable; drive-strength = <4>; slew-rate = <SLEW_RATE_SLOW>; }; @@ -302,6 +327,12 @@ }; }; +&gpio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &uart1 { status = "okay"; pinctrl-names = "default"; diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts index 73491626e0..6aff22d433 100644 --- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -148,7 +148,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_36_grp", "gpio0_37_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts index f767708fb5..1850325e1d 100644 --- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -219,7 +219,7 @@ }; }; - pinctrl_i2c0_gpio: i2c0-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { mux { groups = "gpio0_6_grp", "gpio0_7_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts index b1857e17ab..53aa3dca1d 100644 --- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -125,7 +125,7 @@ }; }; - pinctrl_i2c0_gpio: i2c0-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { mux { groups = "gpio0_74_grp", "gpio0_75_grp"; function = "gpio0"; @@ -152,7 +152,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_76_grp", "gpio0_77_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts index 52f998c225..c5945067cd 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts @@ -275,7 +275,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_4_grp", "gpio0_5_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts index 84952c14f0..ad8f23a0ec 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts @@ -603,7 +603,7 @@ reg = <0x5d>; temperature-stability = <50>; /* copy from zc702 */ factory-fout = <156250000>; - clock-frequency = <148500000>; + clock-frequency = <156250000>; clock-output-names = "si570_mgt"; }; }; @@ -689,7 +689,7 @@ }; }; - pinctrl_i2c0_gpio: i2c0-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { mux { groups = "gpio0_14_grp", "gpio0_15_grp"; function = "gpio0"; @@ -716,7 +716,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_16_grp", "gpio0_17_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts index 5084ddcee0..b1eca1bb6a 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts @@ -272,7 +272,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_16_grp", "gpio0_17_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu104-revC.dts b/dts/src/arm64/xilinx/zynqmp-zcu104-revC.dts index b273bd1d92..ddc74d963a 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu104-revC.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu104-revC.dts @@ -284,7 +284,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_16_grp", "gpio0_17_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts index 50c384aa25..7beedd730f 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts @@ -605,7 +605,7 @@ reg = <0x5d>; temperature-stability = <50>; /* copy from zc702 */ factory-fout = <156250000>; - clock-frequency = <148500000>; + clock-frequency = <156250000>; clock-output-names = "si570_mgt"; }; }; @@ -700,7 +700,7 @@ }; }; - pinctrl_i2c0_gpio: i2c0-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { mux { groups = "gpio0_14_grp", "gpio0_15_grp"; function = "gpio0"; @@ -727,7 +727,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_16_grp", "gpio0_17_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts index 617cb0405a..b67ff7ecf3 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts @@ -589,7 +589,7 @@ }; }; - pinctrl_i2c0_gpio: i2c0-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { mux { groups = "gpio0_14_grp", "gpio0_15_grp"; function = "gpio0"; @@ -616,7 +616,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_16_grp", "gpio0_17_grp"; function = "gpio0"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu1275-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu1275-revA.dts index c406017b03..a38c2baeba 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu1275-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu1275-revA.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * dts file for Xilinx ZynqMP ZC1275 + * dts file for Xilinx ZynqMP ZCU1275 * * (C) Copyright 2017 - 2021, Xilinx, Inc. * diff --git a/dts/src/arm64/xilinx/zynqmp.dtsi b/dts/src/arm64/xilinx/zynqmp.dtsi index eaba466804..25d20d8032 100644 --- a/dts/src/arm64/xilinx/zynqmp.dtsi +++ b/dts/src/arm64/xilinx/zynqmp.dtsi @@ -24,6 +24,13 @@ #address-cells = <2>; #size-cells = <2>; + options { + u-boot { + compatible = "u-boot,config"; + bootscr-address = /bits/ 64 <0x20000000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -180,13 +187,18 @@ }; firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; #power-domain-cells = <1>; method = "smc"; bootph-all; - zynqmp_power: zynqmp-power { + zynqmp_power: power-management { bootph-all; compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; @@ -281,6 +293,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + resets = <&zynqmp_reset ZYNQMP_RESET_CAN0>; power-domains = <&zynqmp_firmware PD_CAN_0>; }; @@ -293,6 +306,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + resets = <&zynqmp_reset ZYNQMP_RESET_CAN1>; power-domains = <&zynqmp_firmware PD_CAN_1>; }; @@ -326,7 +340,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14e8>; + /* iommus = <&smmu 0x14e8>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -339,7 +353,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14e9>; + /* iommus = <&smmu 0x14e9>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -352,7 +366,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14ea>; + /* iommus = <&smmu 0x14ea>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -365,7 +379,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14eb>; + /* iommus = <&smmu 0x14eb>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -378,7 +392,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14ec>; + /* iommus = <&smmu 0x14ec>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -391,7 +405,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14ed>; + /* iommus = <&smmu 0x14ed>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -404,7 +418,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14ee>; + /* iommus = <&smmu 0x14ee>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -417,7 +431,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; - iommus = <&smmu 0x14ef>; + /* iommus = <&smmu 0x14ef>; */ power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -462,7 +476,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x868>; + /* iommus = <&smmu 0x868>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -475,7 +489,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x869>; + /* iommus = <&smmu 0x869>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -488,7 +502,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x86a>; + /* iommus = <&smmu 0x86a>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -501,7 +515,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x86b>; + /* iommus = <&smmu 0x86b>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -514,7 +528,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x86c>; + /* iommus = <&smmu 0x86c>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -527,7 +541,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x86d>; + /* iommus = <&smmu 0x86d>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -540,7 +554,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x86e>; + /* iommus = <&smmu 0x86e>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -553,7 +567,7 @@ clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; - iommus = <&smmu 0x86f>; + /* iommus = <&smmu 0x86f>; */ power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -573,7 +587,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - iommus = <&smmu 0x872>; + /* iommus = <&smmu 0x872>; */ power-domains = <&zynqmp_firmware PD_NAND>; }; @@ -585,7 +599,7 @@ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0b0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - iommus = <&smmu 0x874>; + /* iommus = <&smmu 0x874>; */ power-domains = <&zynqmp_firmware PD_ETH_0>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>; reset-names = "gem0_rst"; @@ -599,7 +613,7 @@ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0c0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - iommus = <&smmu 0x875>; + /* iommus = <&smmu 0x875>; */ power-domains = <&zynqmp_firmware PD_ETH_1>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; reset-names = "gem1_rst"; @@ -613,7 +627,7 @@ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0d0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - iommus = <&smmu 0x876>; + /* iommus = <&smmu 0x876>; */ power-domains = <&zynqmp_firmware PD_ETH_2>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>; reset-names = "gem2_rst"; @@ -627,7 +641,7 @@ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0e0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - iommus = <&smmu 0x877>; + /* iommus = <&smmu 0x877>; */ power-domains = <&zynqmp_firmware PD_ETH_3>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>; reset-names = "gem3_rst"; @@ -689,7 +703,7 @@ msi-parent = <&pcie>; reg = <0x0 0xfd0e0000 0x0 0x1000>, <0x0 0xfd480000 0x0 0x1000>, - <0x80 0x00000000 0x0 0x1000000>; + <0x80 0x00000000 0x0 0x10000000>; reg-names = "breg", "pcireg", "cfg"; ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */ <0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ @@ -699,7 +713,7 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; - iommus = <&smmu 0x4d0>; + /* iommus = <&smmu 0x4d0>; */ power-domains = <&zynqmp_firmware PD_PCIE>; pcie_intc: legacy-interrupt-controller { interrupt-controller; @@ -720,7 +734,7 @@ <0x0 0xc0000000 0x0 0x8000000>; #address-cells = <1>; #size-cells = <0>; - iommus = <&smmu 0x873>; + /* iommus = <&smmu 0x873>; */ power-domains = <&zynqmp_firmware PD_QSPI>; }; @@ -752,8 +766,7 @@ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&zynqmp_firmware PD_SATA>; resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; - iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, - <&smmu 0x4c2>, <&smmu 0x4c3>; + /* iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; */ }; sdhci0: mmc@ff160000 { @@ -764,7 +777,7 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; - iommus = <&smmu 0x870>; + /* iommus = <&smmu 0x870>; */ #clock-cells = <1>; clock-output-names = "clk_out_sd0", "clk_in_sd0"; power-domains = <&zynqmp_firmware PD_SD_0>; @@ -779,7 +792,7 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; - iommus = <&smmu 0x871>; + /* iommus = <&smmu 0x871>; */ #clock-cells = <1>; clock-output-names = "clk_out_sd1", "clk_in_sd1"; power-domains = <&zynqmp_firmware PD_SD_1>; @@ -912,6 +925,7 @@ status = "disabled"; compatible = "xlnx,zynqmp-dwc3"; reg = <0x0 0xff9d0000 0x0 0x100>; + clock-names = "bus_clk", "ref_clk"; power-domains = <&zynqmp_firmware PD_USB_0>; resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>, <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>, @@ -922,14 +936,15 @@ dwc3_0: usb@fe200000 { compatible = "snps,dwc3"; + status = "disabled"; reg = <0x0 0xfe200000 0x0 0x40000>; interrupt-parent = <&gic>; interrupt-names = "host", "peripheral", "otg"; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "bus_early", "ref"; - iommus = <&smmu 0x860>; + clock-names = "ref"; + /* iommus = <&smmu 0x860>; */ snps,quirk-frame-length-adjustment = <0x20>; snps,resume-hs-terminations; /* dma-coherent; */ @@ -942,6 +957,7 @@ status = "disabled"; compatible = "xlnx,zynqmp-dwc3"; reg = <0x0 0xff9e0000 0x0 0x100>; + clock-names = "bus_clk", "ref_clk"; power-domains = <&zynqmp_firmware PD_USB_1>; resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, @@ -951,14 +967,15 @@ dwc3_1: usb@fe300000 { compatible = "snps,dwc3"; + status = "disabled"; reg = <0x0 0xfe300000 0x0 0x40000>; interrupt-parent = <&gic>; interrupt-names = "host", "peripheral", "otg"; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "bus_early", "ref"; - iommus = <&smmu 0x861>; + clock-names = "ref"; + /* iommus = <&smmu 0x861>; */ snps,quirk-frame-length-adjustment = <0x20>; snps,resume-hs-terminations; /* dma-coherent; */ @@ -1018,6 +1035,7 @@ interrupt-parent = <&gic>; clock-names = "axi_clk"; power-domains = <&zynqmp_firmware PD_DP>; + /* iommus = <&smmu 0xce4>; */ #dma-cells = <1>; }; @@ -1032,6 +1050,7 @@ reg-names = "dp", "blend", "av_buf", "aud"; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; + /* iommus = <&smmu 0xce3>; */ clock-names = "dp_apb_clk", "dp_aud_clk", "dp_vtc_pixel_clk_in"; power-domains = <&zynqmp_firmware PD_DP>; |