summaryrefslogtreecommitdiffstats
path: root/dts/src/mips/ingenic
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/mips/ingenic')
-rw-r--r--dts/src/mips/ingenic/ci20.dts287
-rw-r--r--dts/src/mips/ingenic/cu1000-neo.dts169
-rw-r--r--dts/src/mips/ingenic/cu1830-neo.dts224
-rw-r--r--dts/src/mips/ingenic/gcw0.dts500
-rw-r--r--dts/src/mips/ingenic/gcw0_proto.dts13
-rw-r--r--dts/src/mips/ingenic/jz4725b.dtsi374
-rw-r--r--dts/src/mips/ingenic/jz4740.dtsi60
-rw-r--r--dts/src/mips/ingenic/jz4770.dtsi244
-rw-r--r--dts/src/mips/ingenic/jz4780.dtsi229
-rw-r--r--dts/src/mips/ingenic/qi_lb60.dts151
-rw-r--r--dts/src/mips/ingenic/rs90.dts327
-rw-r--r--dts/src/mips/ingenic/x1000.dtsi255
-rw-r--r--dts/src/mips/ingenic/x1830.dtsi430
13 files changed, 2925 insertions, 338 deletions
diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts
index c340f947ba..a141a699b7 100644
--- a/dts/src/mips/ingenic/ci20.dts
+++ b/dts/src/mips/ingenic/ci20.dts
@@ -4,6 +4,7 @@
#include "jz4780.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/regulator/active-semi,8865-regulator.h>
@@ -27,53 +28,168 @@
0x30000000 0x30000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ switch {
+ label = "ci20:sw1";
+ linux,code = <KEY_F13>;
+ gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
leds {
compatible = "gpio-leds";
- led0 {
+ led-0 {
label = "ci20:red:led0";
gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
};
- led1 {
+ led-1 {
label = "ci20:red:led1";
gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "nand-disk";
};
- led2 {
+ led-2 {
label = "ci20:red:led2";
gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu1";
};
- led3 {
+ led-3 {
label = "ci20:red:led3";
gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
};
};
- eth0_power: fixedregulator@0 {
+ eth0_power: fixedregulator-0 {
compatible = "regulator-fixed";
+
regulator-name = "eth0_power";
- gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpb 25 0>;
+ enable-active-high;
+ };
+
+ hdmi_out: connector {
+ compatible = "hdmi-connector";
+ label = "HDMI OUT";
+ type = "a";
+
+ ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&dw_hdmi_out>;
+ };
+ };
+ };
+
+ ir: ir {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+ };
+
+ bt_power: fixedregulator-1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "bt_power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-settling-time-us = <1400>;
+
+ vin-supply = <&vcc_50>;
+
+ gpio = <&gpb 19 0>;
enable-active-high;
};
- wlan0_power: fixedregulator@1 {
+ otg_power: fixedregulator-2 {
compatible = "regulator-fixed";
- regulator-name = "wlan0_power";
- gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+
+ regulator-name = "otg_power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpf 15 0>;
enable-active-high;
};
+
+ wifi_power: fixedregulator-4 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wifi_power";
+
+ /*
+ * Technically it's 5V, the WiFi chip has its own internal
+ * regulators; but the MMC/SD subsystem won't accept such a
+ * value.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-settling-time-us = <150000>;
+
+ vin-supply = <&bt_power>;
+ };
+
+ vcc_33v: fixedregulator-5 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc_33v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+
+ clocks = <&rtc_dev>;
+ clock-names = "ext_clock";
+ };
};
&ext {
clock-frequency = <48000000>;
};
+&cgu {
+ /*
+ * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>,
+ <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>,
+ <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_MSCMUX>;
+ assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_MPLL>,
+ <&cgu JZ4780_CLK_SSIPLL>,
+ <0>, <&cgu JZ4780_CLK_MPLL>;
+ assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>;
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timers and clocksource,
+ * use channel #0 and #1 for the per cpu system timers,
+ * and use channel #2 for the clocksource.
+ *
+ * 3000 kHz for the OST timer to provide a higher
+ * precision clocksource.
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_OST>;
+ assigned-clock-rates = <750000>, <750000>, <750000>, <3000000>;
+};
+
&mmc0 {
status = "okay";
@@ -84,24 +200,33 @@
pinctrl-0 = <&pins_mmc0>;
cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vcc_33v>;
+ vqmmc-supply = <&vcc_33v>;
};
&mmc1 {
status = "okay";
bus-width = <4>;
- max-frequency = <50000000>;
+ max-frequency = <25000000>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ vmmc-supply = <&wifi_power>;
+ vqmmc-supply = <&wifi_io>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&pins_mmc1>;
- brcmf: wifi@1 {
-/* reg = <4>;*/
- compatible = "brcm,bcm4330-fmac";
- vcc-supply = <&wlan0_power>;
- device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpd>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
};
};
@@ -128,11 +253,20 @@
bluetooth {
compatible = "brcm,bcm4330-bt";
- reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
- vcc-supply = <&wlan0_power>;
+
+ vbat-supply = <&bt_power>;
+ vddio-supply = <&wifi_io>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
+ clocks = <&rtc_dev>;
+ clock-names = "lpo";
+
+ reset-gpios = <&gpf 8 GPIO_ACTIVE_LOW>;
device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+ shutdown-gpios = <&gpf 4 GPIO_ACTIVE_HIGH>;
};
};
@@ -161,59 +295,54 @@
act8600: act8600@5a {
compatible = "active-semi,act8600";
reg = <0x5a>;
- status = "okay";
regulators {
- vddcore: SUDCDC1 {
- regulator-name = "DCDC_REG1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ vddcore: DCDC1 {
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ vp1-supply = <&vcc_33v>;
regulator-always-on;
};
- vddmem: SUDCDC2 {
- regulator-name = "DCDC_REG2";
+ vddmem: DCDC2 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
+ vp2-supply = <&vcc_33v>;
regulator-always-on;
};
- vcc_33: SUDCDC3 {
- regulator-name = "DCDC_REG3";
+ vcc_33: DCDC3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ vp3-supply = <&vcc_33v>;
regulator-always-on;
};
- vcc_50: SUDCDC4 {
- regulator-name = "SUDCDC_REG4";
+ vcc_50: SUDCDC_REG4 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
- vcc_25: LDO_REG5 {
- regulator-name = "LDO_REG5";
+ vcc_25: LDO5 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc_33v>;
regulator-always-on;
};
- wifi_io: LDO_REG6 {
- regulator-name = "LDO_REG6";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
+ wifi_io: LDO6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-settling-time-us = <150000>;
+ inl-supply = <&vcc_33v>;
};
- vcc_28: LDO_REG7 {
- regulator-name = "LDO_REG7";
+ cim_io_28: LDO7 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
+ inl-supply = <&vcc_33v>;
};
- vcc_15: LDO_REG8 {
- regulator-name = "LDO_REG8";
+ cim_io_15: LDO8 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- regulator-always-on;
+ inl-supply = <&vcc_33v>;
};
vrtc_18: LDO_REG9 {
- regulator-name = "LDO_REG9";
/* Despite the datasheet stating 3.3V
* for REG9 and the driver expecting that,
* REG9 outputs 1.8V.
@@ -227,7 +356,6 @@
regulator-always-on;
};
vcc_11: LDO_REG10 {
- regulator-name = "LDO_REG10";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
@@ -287,7 +415,7 @@
#address-cells = <1>;
#size-cells = <0>;
- ingenic,bch-controller = <&bch>;
+ ecc-engine = <&bch>;
ingenic,nemc-tAS = <10>;
ingenic,nemc-tAH = <5>;
@@ -353,8 +481,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc_cs6>;
- reg = <6 0 1 /* addr */
- 6 2 1>; /* data */
+ reg = <6 0 1>, /* addr */
+ <6 2 1>; /* data */
ingenic,nemc-tAS = <15>;
ingenic,nemc-tAH = <10>;
@@ -362,11 +490,14 @@
ingenic,nemc-tAW = <50>;
ingenic,nemc-tSTRV = <100>;
- reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
vcc-supply = <&eth0_power>;
interrupt-parent = <&gpe>;
- interrupts = <19 4>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+
+ nvmem-cells = <&eth0_addr>;
+ nvmem-cell-names = "mac-address";
};
};
@@ -374,6 +505,16 @@
status = "okay";
};
+&otg_phy {
+ status = "okay";
+
+ vcc-supply = <&otg_power>;
+};
+
+&otg {
+ status = "okay";
+};
+
&pinctrl {
pins_uart0: uart0 {
function = "uart0";
@@ -435,6 +576,12 @@
bias-disable;
};
+ pins_hdmi_ddc: hdmi_ddc {
+ function = "hdmi-ddc";
+ groups = "hdmi-ddc";
+ bias-disable;
+ };
+
pins_nemc: nemc {
function = "nemc";
groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
@@ -466,8 +613,38 @@
};
};
-&tcu {
- /* 3 MHz for the system timer and clocksource */
- assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
- assigned-clock-rates = <3000000>, <3000000>;
+&hdmi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_hdmi_ddc>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dw_hdmi_in: endpoint {
+ remote-endpoint = <&lcd_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dw_hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+};
+
+&lcdc0 {
+ status = "okay";
+
+ port {
+ lcd_out: endpoint {
+ remote-endpoint = <&dw_hdmi_in>;
+ };
+ };
};
diff --git a/dts/src/mips/ingenic/cu1000-neo.dts b/dts/src/mips/ingenic/cu1000-neo.dts
index 03abd94acd..c89abf94e7 100644
--- a/dts/src/mips/ingenic/cu1000-neo.dts
+++ b/dts/src/mips/ingenic/cu1000-neo.dts
@@ -3,12 +3,12 @@
#include "x1000.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/ingenic,sysost.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
- compatible = "yna,cu1000-neo", "ingenic,x1000";
- model = "YSH & ATIL General Board CU Neo";
+ compatible = "yna,cu1000-neo", "ingenic,x1000e";
+ model = "YSH & ATIL General Board CU1000-Neo";
aliases {
serial2 = &uart2;
@@ -23,20 +23,19 @@
reg = <0x0 0x04000000>;
};
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&gpb 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
wlan_pwrseq: msc1-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&lpoclk>;
- clock-names = "ext_clock";
-
reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
-
- lpoclk: ap6212a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
};
};
@@ -44,60 +43,78 @@
clock-frequency = <24000000>;
};
-&tcu {
+&cgu {
+ /*
+ * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks = <&cgu X1000_CLK_RTC>;
+ assigned-clock-parents = <&cgu X1000_CLK_RTCLK>;
+};
+
+&ost {
/* 1500 kHz for the system timer and clocksource */
- assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+ assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
assigned-clock-rates = <1500000>, <1500000>;
-
- /* Use channel #0 for the system timer channel #2 for the clocksource */
- ingenic,pwm-channels-mask = <0xfa>;
};
-&i2c0 {
+&uart2 {
status = "okay";
- clock-frequency = <400000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pins_i2c0>;
-
- ads7830@48 {
- compatible = "ti,ads7830";
- reg = <0x48>;
- };
-};
-
-&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pins_uart2>;
+};
+&ssi {
status = "okay";
-};
-&mac {
- phy-mode = "rmii";
- phy-handle = <&lan8720a>;
+ num-cs = <2>;
+ cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pins_mac>;
+ pinctrl-0 = <&pins_ssi>;
- snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
+ sc16is752: expander@0 {
+ compatible = "nxp,sc16is752";
+ reg = <0>; /* CE0 */
- status = "okay";
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ spi-max-frequency = <4000000>;
+
+ clocks = <&exclk_sc16is752>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ exclk_sc16is752: sc16is752 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+ };
};
-&mdio {
+&i2c0 {
status = "okay";
- lan8720a: ethernet-phy@0 {
- compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ ads7830: adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
};
};
&msc0 {
+ status = "okay";
+
bus-width = <8>;
max-frequency = <50000000>;
@@ -105,26 +122,23 @@
pinctrl-0 = <&pins_msc0>;
non-removable;
-
- status = "okay";
};
&msc1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
bus-width = <4>;
max-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&pins_msc1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
non-removable;
mmc-pwrseq = <&wlan_pwrseq>;
- status = "okay";
-
ap6212a: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
@@ -137,25 +151,56 @@
};
};
-&pinctrl {
- pins_i2c0: i2c0 {
- function = "i2c0";
- groups = "i2c0-data";
- bias-disable;
+&mac {
+ status = "okay";
+
+ phy-mode = "rmii";
+ phy-handle = <&lan8720a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+ status = "okay";
+
+ lan8720a: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
};
+};
+&otg_phy {
+ status = "okay";
+};
+
+&otg {
+ status = "okay";
+};
+
+&pinctrl {
pins_uart2: uart2 {
function = "uart2";
groups = "uart2-data-d";
- bias-disable;
+ bias-pull-up;
};
- pins_mac: mac {
- function = "mac";
- groups = "mac";
+ pins_ssi: ssi {
+ function = "ssi";
+ groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d";
bias-disable;
};
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-pull-up;
+ };
+
pins_msc0: msc0 {
function = "mmc0";
groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
@@ -167,4 +212,10 @@
groups = "mmc1-1bit", "mmc1-4bit";
bias-disable;
};
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
};
diff --git a/dts/src/mips/ingenic/cu1830-neo.dts b/dts/src/mips/ingenic/cu1830-neo.dts
new file mode 100644
index 0000000000..3c77849833
--- /dev/null
+++ b/dts/src/mips/ingenic/cu1830-neo.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1830.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,sysost.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "yna,cu1830-neo", "ingenic,x1830";
+ model = "YSH & ATIL General Board CU1830-Neo";
+
+ aliases {
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&gpc 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ wlan_pwrseq: msc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&exclk {
+ clock-frequency = <24000000>;
+};
+
+&cgu {
+ /*
+ * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks = <&cgu X1830_CLK_RTC>;
+ assigned-clock-parents = <&cgu X1830_CLK_RTCLK>;
+};
+
+&ost {
+ /* 1500 kHz for the system timer and clocksource */
+ assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
+ assigned-clock-rates = <1500000>, <1500000>;
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart1>;
+};
+
+&ssi0 {
+ status = "okay";
+
+ num-cs = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_ssi0>;
+
+ sc16is752: expander@0 {
+ compatible = "nxp,sc16is752";
+ reg = <0>; /* CE0 */
+
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ spi-max-frequency = <4000000>;
+
+ clocks = <&exclk_sc16is752>;
+
+ interrupt-parent = <&gpb>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ exclk_sc16is752: sc16is752 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ ads7830: adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+};
+
+&dtrng {
+ status = "okay";
+};
+
+&msc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc0>;
+
+ non-removable;
+};
+
+&msc1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc1>;
+
+ non-removable;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ ap6212a: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ brcm,drive-strength = <10>;
+ };
+};
+
+&mac {
+ status = "okay";
+
+ phy-mode = "rmii";
+ phy-handle = <&ip101gr>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+ status = "okay";
+
+ ip101gr: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&otg_phy {
+ status = "okay";
+};
+
+&otg {
+ status = "okay";
+};
+
+&pinctrl {
+ pins_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1-data";
+ bias-pull-up;
+ };
+
+ pins_ssi0: ssi0 {
+ function = "ssi0";
+ groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1";
+ bias-disable;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-pull-up;
+ };
+
+ pins_msc0: msc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit", "mmc0-4bit";
+ bias-disable;
+ };
+
+ pins_msc1: msc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit", "mmc1-4bit";
+ bias-disable;
+ };
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
+};
diff --git a/dts/src/mips/ingenic/gcw0.dts b/dts/src/mips/ingenic/gcw0.dts
index f58d239c20..5d33f26fd2 100644
--- a/dts/src/mips/ingenic/gcw0.dts
+++ b/dts/src/mips/ingenic/gcw0.dts
@@ -4,6 +4,10 @@
#include "jz4770.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
/ {
compatible = "gcw,zero", "ingenic,jz4770";
model = "GCW Zero";
@@ -15,20 +19,365 @@
serial3 = &uart3;
};
+ memory: memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>,
+ <0x30000000 0x10000000>;
+ };
+
chosen {
stdout-path = "serial2:57600n8";
};
- board {
- compatible = "simple-bus";
+ vcc: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmc1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc1_vcc";
+ gpio = <&gpe 9 0>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc>;
+ };
+
+ headphones_amp: analog-amplifier@0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>;
+ enable-delay-ms = <50>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Headphones Amp";
+ };
+
+ speaker_amp: analog-amplifier@1 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "gcw0-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones",
+ "Microphone", "Built-in Mic";
+ simple-audio-card,routing =
+ "Headphones Amp INL", "LHPOUT",
+ "Headphones Amp INR", "RHPOUT",
+ "Headphones", "Headphones Amp OUTL",
+ "Headphones", "Headphones Amp OUTR",
+ "Speaker Amp INL", "LOUT",
+ "Speaker Amp INR", "ROUT",
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR",
+ "LLINEIN", "Cap-less",
+ "RLINEIN", "Cap-less",
+ "Built-in Mic", "MICBIAS",
+ "MIC1P", "Built-in Mic",
+ "MIC1N", "Built-in Mic";
+ simple-audio-card,pin-switches = "Speaker", "Headphones";
+
+ simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
+ simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ rumble {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm 4 2000000 0>;
+ pwm-names = "enable";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm4>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 1 40000 0>;
+ power-supply = <&vcc>;
+
+ brightness-levels = <0 16 32 48 64 80 96 112 128
+ 144 160 176 192 208 224 240 255>;
+ default-brightness-level = <12>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button-0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ linux,can-disable;
+ gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button-1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ linux,can-disable;
+ gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
+ };
+
+ button-2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ linux,can-disable;
+ gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
+ };
+
+ button-3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ linux,can-disable;
+ gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button-4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ linux,can-disable;
+ gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
+ };
+
+ button-5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ linux,can-disable;
+ gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button-6 {
+ label = "Button Y";
+ linux,code = <KEY_SPACE>;
+ linux,can-disable;
+ gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
+ };
+
+ button-7 {
+ label = "Button X";
+ linux,code = <KEY_LEFTSHIFT>;
+ linux,can-disable;
+ gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
+ };
+
+ button-8 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ linux,can-disable;
+ gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button-9 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ linux,can-disable;
+ gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
+ };
+
+ button-10 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ linux,can-disable;
+ gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button-11 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ linux,can-disable;
+ /*
+ * This is the only button that is active high,
+ * since it doubles as BOOT_SEL1.
+ */
+ gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ button-12 {
+ label = "Power slider";
+ linux,code = <KEY_POWER>;
+ linux,can-disable;
+ gpios = <&gpa 30 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-13 {
+ label = "Power hold";
+ linux,code = <KEY_PAUSE>;
+ linux,can-disable;
+ gpios = <&gpf 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c3: i2c-controller@3 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>; /* 250 kHz */
+
+ act8600: pmic@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+
+ regulators {
+ /* USB OTG */
+ otg_vbus: SUDCDC_REG4 {
+ /*
+ * 5.3V instead of 5.0V to compensate
+ * for the voltage drop of a diode
+ * between the regulator and the
+ * connector.
+ */
+ regulator-min-microvolt = <5300000>;
+ regulator-max-microvolt = <5300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * When this is off, there is no sound, but also
+ * no USB networking.
+ */
+ ldo5: LDO5 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* LCD panel and FM radio */
+ ldo6: LDO6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* ??? */
+ LDO7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*regulator-always-on;*/
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * The colors on the LCD are wrong when this is
+ * off. Which is strange, since the LCD panel
+ * data sheet only mentions a 3.3V input.
+ */
+ LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* RTC fixed 3.3V */
+ LDO_REG9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* Unused fixed 1.2V */
+ LDO_REG10 {
+ inl-supply = <&vcc>;
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpb 30 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ nt39016@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
- otg_phy: otg-phy {
- compatible = "usb-nop-xceiv";
- clocks = <&cgu JZ4770_CLK_OTG_PHY>;
- clock-names = "main_clk";
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ label = "mini-USB";
+ type = "mini";
+
+ /*
+ * USB OTG is not yet working reliably, the ID detection
+ * mechanism tends to fry easily for unknown reasons.
+ * Until this is fixed, disable OTG by not providing the
+ * ID GPIO to the driver.
+ */
+ //id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>;
+
+ vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&otg_vbus>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_otg>;
+
+ port {
+ usb_ep: endpoint {
+ remote-endpoint = <&usb_otg_ep>;
+ };
};
};
};
@@ -37,24 +386,86 @@
clock-frequency = <12000000>;
};
+&pinctrl {
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-24bit";
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data";
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-a", "mmc0-4bit-a";
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ };
+
+ pins_otg: otg {
+ otg-vbus-pin {
+ function = "otg";
+ groups = "otg-vbus";
+ };
+
+ vbus-pin {
+ pins = "PB5";
+ bias-disable;
+ };
+ };
+
+ pins_pwm1: pwm1 {
+ function = "pwm1";
+ groups = "pwm1";
+ };
+
+ pins_pwm4: pwm4 {
+ function = "pwm4";
+ groups = "pwm4";
+ };
+};
+
&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+
status = "okay";
};
&cgu {
- /* Put high-speed peripherals under PLL1, such that we can change the
+ /*
+ * Put high-speed peripherals under PLL1, such that we can change the
* PLL0 frequency on demand without having to suspend peripherals.
* We use a rate of 432 MHz, which is the least common multiple of
* 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+ * Put the GPU under PLL0 since we want a higher frequency.
+ * Use the 32 kHz oscillator as the parent of the RTC for a higher
+ * precision.
*/
assigned-clocks =
<&cgu JZ4770_CLK_PLL1>,
- <&cgu JZ4770_CLK_UHC>;
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_UHC>,
+ <&cgu JZ4770_CLK_LPCLK_MUX>,
+ <&cgu JZ4770_CLK_MMC0_MUX>,
+ <&cgu JZ4770_CLK_MMC1_MUX>;
assigned-clock-parents =
<0>,
+ <&cgu JZ4770_CLK_PLL0>,
+ <&cgu JZ4770_CLK_OSC32K>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
<&cgu JZ4770_CLK_PLL1>;
assigned-clock-rates =
- <432000000>;
+ <432000000>,
+ <600000000>;
};
&uhc {
@@ -63,10 +474,69 @@
};
&tcu {
- /* 750 kHz for the system timer and clocksource */
- assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
- assigned-clock-rates = <750000>, <750000>;
+ /*
+ * 750 kHz for the system timer and clocksource, 12 MHz for the OST,
+ * and use RTC as the parent for the watchdog clock
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>,
+ <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>, <12000000>;
- /* PWM1 is in use, so reserve channel #2 for the clocksource */
+ /* PWM1 is in use, so use channel #2 for the clocksource */
ingenic,pwm-channels-mask = <0xfa>;
};
+
+&usb_otg {
+ port {
+ usb_otg_ep: endpoint {
+ remote-endpoint = <&usb_ep>;
+ };
+ };
+};
+
+&otg_phy {
+ vcc-supply = <&ldo5>;
+};
+
+&rtc {
+ clocks = <&cgu JZ4770_CLK_RTC>;
+ clock-names = "rtc";
+
+ system-power-controller;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ vmmc-supply = <&vcc>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&mmc1_power>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+
+ port {
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/dts/src/mips/ingenic/gcw0_proto.dts b/dts/src/mips/ingenic/gcw0_proto.dts
new file mode 100644
index 0000000000..02df22f8ae
--- /dev/null
+++ b/dts/src/mips/ingenic/gcw0_proto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "gcw0.dts"
+
+/ {
+ model = "GCW Zero Prototype";
+};
+
+&memory {
+ /* Prototype has only 256 MiB of RAM */
+ reg = <0x0 0x10000000>;
+};
diff --git a/dts/src/mips/ingenic/jz4725b.dtsi b/dts/src/mips/ingenic/jz4725b.dtsi
new file mode 100644
index 0000000000..c5c5a094c3
--- /dev/null
+++ b/dts/src/mips/ingenic/jz4725b.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4725b";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4725b-intc", "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: clock-controller@10000000 {
+ compatible = "ingenic,jz4725b-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4725b-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4725B_CLK_RTC>,
+ <&cgu JZ4725B_CLK_EXT>,
+ <&cgu JZ4725B_CLK_PCLK>,
+ <&cgu JZ4725B_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23>, <22>, <21>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4725b-watchdog", "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@60 {
+ compatible = "ingenic,jz4725b-pwm";
+ reg = <0x60 0x40>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>;
+ clock-names = "timer0", "timer1", "timer2",
+ "timer3", "timer4", "timer5";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4725b-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc_dev: rtc@10003000 {
+ compatible = "ingenic,jz4725b-rtc", "ingenic,jz4740-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ clocks = <&cgu JZ4725B_CLK_RTC>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pinctrl@10010000 {
+ compatible = "ingenic,jz4725b-pinctrl";
+ reg = <0x10010000 0x400>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4725b-i2s", "ingenic,jz4740-i2s";
+ reg = <0x10020000 0x38>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_AIC>, <&cgu JZ4725B_CLK_I2S>;
+ clock-names = "aic", "i2s";
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a4 {
+ compatible = "ingenic,jz4725b-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4725b-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4725B_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <25>;
+
+ dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4725b-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4725B_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+
+ dmas = <&dmac 31 0xffffffff>, <&dmac 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ uart: serial@10030000 {
+ compatible = "ingenic,jz4725b-uart", "ingenic,jz4740-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&ext>, <&cgu JZ4725B_CLK_UART>;
+ clock-names = "baud", "module";
+ };
+
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4725b-adc";
+ #io-channel-cells = <1>;
+
+ reg = <0x10070000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10070000 0x30>;
+
+ clocks = <&cgu JZ4725B_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ nemc: memory-controller@13010000 {
+ compatible = "ingenic,jz4725b-nemc", "ingenic,jz4740-nemc";
+ reg = <0x13010000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x18000000 0x4000000>, <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>, <4 0 0x08000000 0x4000000>;
+
+ clocks = <&cgu JZ4725B_CLK_MCLK>;
+ };
+
+ dmac: dma-controller@13020000 {
+ compatible = "ingenic,jz4725b-dma";
+ reg = <0x13020000 0xd8>, <0x13020300 0x14>;
+
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <29>;
+
+ clocks = <&cgu JZ4725B_CLK_DMA>;
+ };
+
+ udc: usb@13040000 {
+ compatible = "ingenic,jz4725b-musb", "ingenic,jz4740-musb";
+ reg = <0x13040000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+ interrupt-names = "mc";
+
+ clocks = <&cgu JZ4725B_CLK_UDC>;
+ clock-names = "udc";
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4725b-lcd";
+ reg = <0x13050000 0x130>; /* tbc */
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4725B_CLK_LCD>;
+ clock-names = "lcd_pclk";
+
+ lcd_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+
+ ipu_output: endpoint {
+ remote-endpoint = <&ipu_input>;
+ };
+ };
+ };
+ };
+
+ ipu: ipu@13080000 {
+ compatible = "ingenic,jz4725b-ipu";
+ reg = <0x13080000 0x64>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+
+ clocks = <&cgu JZ4725B_CLK_IPU>;
+ clock-names = "ipu";
+
+ port {
+ ipu_input: endpoint {
+ remote-endpoint = <&ipu_output>;
+ };
+ };
+ };
+
+ bch: ecc-controller@130d0000 {
+ compatible = "ingenic,jz4725b-bch";
+ reg = <0x130d0000 0x44>;
+
+ clocks = <&cgu JZ4725B_CLK_BCH>;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
+};
diff --git a/dts/src/mips/ingenic/jz4740.dtsi b/dts/src/mips/ingenic/jz4740.dtsi
index a3301bab92..bdd6f4d82e 100644
--- a/dts/src/mips/ingenic/jz4740.dtsi
+++ b/dts/src/mips/ingenic/jz4740.dtsi
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4740-cgu.h>
#include <dt-bindings/clock/ingenic,tcu.h>
/ {
@@ -7,6 +7,20 @@
#size-cells = <1>;
compatible = "ingenic,jz4740";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4740_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -55,10 +69,10 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4740_CLK_RTC
- &cgu JZ4740_CLK_EXT
- &cgu JZ4740_CLK_PCLK
- &cgu JZ4740_CLK_TCU>;
+ clocks = <&cgu JZ4740_CLK_RTC>,
+ <&cgu JZ4740_CLK_EXT>,
+ <&cgu JZ4740_CLK_PCLK>,
+ <&cgu JZ4740_CLK_TCU>;
clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
@@ -74,6 +88,20 @@
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
};
rtc_dev: rtc@10003000 {
@@ -164,11 +192,8 @@
interrupt-parent = <&intc>;
interrupts = <18>;
- clocks = <&cgu JZ4740_CLK_AIC>,
- <&cgu JZ4740_CLK_I2S>,
- <&cgu JZ4740_CLK_EXT>,
- <&cgu JZ4740_CLK_PLL_HALF>;
- clock-names = "aic", "i2s", "ext", "pll half";
+ clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2S>;
+ clock-names = "aic", "i2s";
dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
dma-names = "rx", "tx";
@@ -241,10 +266,10 @@
reg = <0x13010000 0x54>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x18000000 0x4000000
- 2 0 0x14000000 0x4000000
- 3 0 0x0c000000 0x4000000
- 4 0 0x08000000 0x4000000>;
+ ranges = <1 0 0x18000000 0x4000000>,
+ <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>,
+ <4 0 0x08000000 0x4000000>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
@@ -258,8 +283,7 @@
dmac: dma-controller@13020000 {
compatible = "ingenic,jz4740-dma";
- reg = <0x13020000 0xbc
- 0x13020300 0x14>;
+ reg = <0x13020000 0xbc>, <0x13020300 0x14>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
@@ -268,7 +292,7 @@
clocks = <&cgu JZ4740_CLK_DMA>;
};
- uhc: uhc@13030000 {
+ uhc: usb@13030000 {
compatible = "ingenic,jz4740-ohci", "generic-ohci";
reg = <0x13030000 0x1000>;
@@ -296,7 +320,7 @@
lcd: lcd-controller@13050000 {
compatible = "ingenic,jz4740-lcd";
- reg = <0x13050000 0x1000>;
+ reg = <0x13050000 0x60>; /* LCDCMD1+4 */
interrupt-parent = <&intc>;
interrupts = <30>;
diff --git a/dts/src/mips/ingenic/jz4770.dtsi b/dts/src/mips/ingenic/jz4770.dtsi
index 0bfb9edff3..504e895e91 100644
--- a/dts/src/mips/ingenic/jz4770.dtsi
+++ b/dts/src/mips/ingenic/jz4770.dtsi
@@ -1,12 +1,26 @@
// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ingenic,jz4770";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4770_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -37,13 +51,25 @@
};
cgu: jz4770-cgu@10000000 {
- compatible = "ingenic,jz4770-cgu";
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
clocks = <&ext>, <&osc32k>;
clock-names = "ext", "osc32k";
#clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ #phy-cells = <0>;
+ };
};
tcu: timer@10002000 {
@@ -55,9 +81,9 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4770_CLK_RTC
- &cgu JZ4770_CLK_EXT
- &cgu JZ4770_CLK_PCLK>;
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -65,6 +91,47 @@
interrupt-parent = <&intc>;
interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4770-watchdog",
+ "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
};
pinctrl: pin-controller@10010000 {
@@ -165,6 +232,92 @@
};
};
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4770-i2s";
+ reg = <0x10020000 0x94>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>;
+ clock-names = "aic", "i2s";
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a0 {
+ compatible = "ingenic,jz4770-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc2: mmc@10023000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10023000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC2>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <35>;
+
+ dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
uart0: serial@10030000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10030000 0x100>;
@@ -217,37 +370,66 @@
status = "disabled";
};
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4770-adc";
+ reg = <0x10070000 0x30>;
+
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ gpu: gpu@13040000 {
+ compatible = "vivante,gc";
+ reg = <0x13040000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>;
+ clock-names = "bus", "core", "shader";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4770-lcd";
+ reg = <0x13050000 0x130>; /* tbc */
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+ clock-names = "lcd_pclk";
+ };
+
dmac0: dma-controller@13420000 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420000 0xC0
- 0x13420300 0x20>;
+ reg = <0x13420000 0xC0>, <0x13420300 0x20>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <24>;
-
- /* Disable dmac0 until we have something that uses it */
- status = "disabled";
};
dmac1: dma-controller@13420100 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420100 0xC0
- 0x13420400 0x20>;
+ reg = <0x13420100 0xC0>, <0x13420400 0x20>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <23>;
-
- /* Disable dmac1 until we have something that uses it */
- status = "disabled";
};
- uhc: uhc@13430000 {
+ uhc: usb@13430000 {
compatible = "generic-ohci";
reg = <0x13430000 0x1000>;
@@ -260,4 +442,28 @@
status = "disabled";
};
+
+ usb_otg: usb@13440000 {
+ compatible = "ingenic,jz4770-musb";
+ reg = <0x13440000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_OTG>;
+ clock-names = "udc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+ interrupt-names = "mc";
+
+ phys = <&otg_phy>;
+
+ usb-role-switch;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
};
diff --git a/dts/src/mips/ingenic/jz4780.dtsi b/dts/src/mips/ingenic/jz4780.dtsi
index bb89653d16..18affff85c 100644
--- a/dts/src/mips/ingenic/jz4780.dtsi
+++ b/dts/src/mips/ingenic/jz4780.dtsi
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4780-cgu.h>
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/dma/jz4780-dma.h>
@@ -8,6 +8,29 @@
#size-cells = <1>;
compatible = "ingenic,jz4780";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4780_CLK_CPU>;
+ clock-names = "cpu";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <1>;
+
+ clocks = <&cgu JZ4780_CLK_CORE1>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -38,13 +61,34 @@
};
cgu: jz4780-cgu@10000000 {
- compatible = "ingenic,jz4780-cgu";
+ compatible = "ingenic,jz4780-cgu", "simple-mfd";
reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ #clock-cells = <1>;
clocks = <&ext>, <&rtc>;
clock-names = "ext", "rtc";
- #clock-cells = <1>;
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4780-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4780_CLK_OTG1>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ rng: rng@d8 {
+ compatible = "ingenic,jz4780-rng";
+ reg = <0xd8 0x8>;
+
+ status = "disabled";
+ };
};
tcu: timer@10002000 {
@@ -58,9 +102,9 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4780_CLK_RTCLK
- &cgu JZ4780_CLK_EXCLK
- &cgu JZ4780_CLK_PCLK>;
+ clocks = <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_EXCLK>,
+ <&cgu JZ4780_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -76,6 +120,30 @@
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
};
rtc_dev: rtc@10003000 {
@@ -87,6 +155,8 @@
clocks = <&cgu JZ4780_CLK_RTCLK>;
clock-names = "rtc";
+
+ #clock-cells = <0>;
};
pinctrl: pin-controller@10010000 {
@@ -187,23 +257,23 @@
};
};
- spi_gpio {
- compatible = "spi-gpio";
+ spi0: spi@10043000 {
+ compatible = "ingenic,jz4780-spi";
+ reg = <0x10043000 0x1c>;
#address-cells = <1>;
#size-cells = <0>;
- num-chipselects = <2>;
- gpio-miso = <&gpe 14 0>;
- gpio-sck = <&gpe 15 0>;
- gpio-mosi = <&gpe 17 0>;
- cs-gpios = <&gpe 16 0
- &gpe 18 0>;
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&cgu JZ4780_CLK_SSI0>;
+ clock-names = "spi";
- spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <1000000>;
- };
+ dmas = <&dma JZ4780_DMA_SSI0_RX 0xffffffff>,
+ <&dma JZ4780_DMA_SSI0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
};
uart0: serial@10030000 {
@@ -271,8 +341,27 @@
status = "disabled";
};
+ spi1: spi@10044000 {
+ compatible = "ingenic,jz4780-spi";
+ reg = <0x10044000 0x1c>;
+ #address-cells = <1>;
+ #size-sells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <7>;
+
+ clocks = <&cgu JZ4780_CLK_SSI1>;
+ clock-names = "spi";
+
+ dmas = <&dma JZ4780_DMA_SSI1_RX 0xffffffff>,
+ <&dma JZ4780_DMA_SSI1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
i2c0: i2c@10050000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -290,7 +379,7 @@
};
i2c1: i2c@10051000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10051000 0x1000>;
@@ -307,7 +396,7 @@
};
i2c2: i2c@10052000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10052000 0x1000>;
@@ -324,7 +413,7 @@
};
i2c3: i2c@10053000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10053000 0x1000>;
@@ -341,7 +430,7 @@
};
i2c4: i2c@10054000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10054000 0x1000>;
@@ -357,27 +446,81 @@
status = "disabled";
};
+ hdmi: hdmi@10180000 {
+ compatible = "ingenic,jz4780-dw-hdmi";
+ reg = <0x10180000 0x8000>;
+ reg-io-width = <4>;
+
+ clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ lcdc0: lcdc0@13050000 {
+ compatible = "ingenic,jz4780-lcd";
+ reg = <0x13050000 0x1800>;
+
+ clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
+ clock-names = "lcd", "lcd_pclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ status = "disabled";
+ };
+
+ lcdc1: lcdc1@130a0000 {
+ compatible = "ingenic,jz4780-lcd";
+ reg = <0x130a0000 0x1800>;
+
+ clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
+ clock-names = "lcd", "lcd_pclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <23>;
+
+ status = "disabled";
+ };
+
nemc: nemc@13410000 {
- compatible = "ingenic,jz4780-nemc";
+ compatible = "ingenic,jz4780-nemc", "simple-mfd";
reg = <0x13410000 0x10000>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x1b000000 0x1000000
- 2 0 0x1a000000 0x1000000
- 3 0 0x19000000 0x1000000
- 4 0 0x18000000 0x1000000
- 5 0 0x17000000 0x1000000
- 6 0 0x16000000 0x1000000>;
+ ranges = <0 0 0x13410000 0x10000>,
+ <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
clocks = <&cgu JZ4780_CLK_NEMC>;
status = "disabled";
+
+ efuse: efuse@d0 {
+ reg = <0 0xd0 0x30>;
+ compatible = "ingenic,jz4780-efuse";
+
+ clocks = <&cgu JZ4780_CLK_AHB2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_addr: eth-mac-addr@22 {
+ reg = <0x22 0x6>;
+ };
+ };
};
dma: dma@13420000 {
compatible = "ingenic,jz4780-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
@@ -434,4 +577,24 @@
status = "disabled";
};
+
+ otg: usb@13500000 {
+ compatible = "ingenic,jz4780-otg";
+ reg = <0x13500000 0x40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+
+ clocks = <&cgu JZ4780_CLK_UHC>;
+ clock-names = "otg";
+
+ phys = <&otg_phy>;
+ phy-names = "usb2-phy";
+
+ g-rx-fifo-size = <768>;
+ g-np-tx-fifo-size = <256>;
+ g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
+
+ status = "disabled";
+ };
};
diff --git a/dts/src/mips/ingenic/qi_lb60.dts b/dts/src/mips/ingenic/qi_lb60.dts
index 7a371d9c5a..24f987244a 100644
--- a/dts/src/mips/ingenic/qi_lb60.dts
+++ b/dts/src/mips/ingenic/qi_lb60.dts
@@ -16,12 +16,18 @@
/ {
compatible = "qi,lb60", "ingenic,jz4740";
+ model = "Ben Nanonote";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
chosen {
stdout-path = &uart0;
};
- vcc: regulator@0 {
+ vcc: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "vcc";
@@ -30,7 +36,7 @@
regulator-always-on;
};
- mmc_power: regulator@1 {
+ mmc_power: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "mmc_vcc";
gpio = <&gpd 2 0>;
@@ -39,7 +45,7 @@
regulator-max-microvolt = <3300000>;
};
- amp_supply: regulator@2 {
+ amp_supply: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "amp_supply";
gpio = <&gpd 4 0>;
@@ -69,7 +75,7 @@
"Speaker", "OUTL",
"Speaker", "OUTR",
"INL", "LOUT",
- "INL", "ROUT";
+ "INR", "ROUT";
simple-audio-card,aux-devs = <&amp>;
@@ -103,74 +109,73 @@
debounce-delay-ms = <10>;
wakeup-source;
- row-gpios = <&gpd 18 0 &gpd 19 0 &gpd 20 0 &gpd 21 0
- &gpd 22 0 &gpd 23 0 &gpd 24 0 &gpd 26 0>;
- col-gpios = <&gpc 10 0 &gpc 11 0 &gpc 12 0 &gpc 13 0
- &gpc 14 0 &gpc 15 0 &gpc 16 0 &gpc 17 0>;
+ row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>,
+ <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>;
+ col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>,
+ <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>;
gpio-activelow;
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_F1) /* S2 */
- MATRIX_KEY(0, 1, KEY_F2) /* S3 */
- MATRIX_KEY(0, 2, KEY_F3) /* S4 */
- MATRIX_KEY(0, 3, KEY_F4) /* S5 */
- MATRIX_KEY(0, 4, KEY_F5) /* S6 */
- MATRIX_KEY(0, 5, KEY_F6) /* S7 */
- MATRIX_KEY(0, 6, KEY_F7) /* S8 */
-
- MATRIX_KEY(1, 0, KEY_Q) /* S10 */
- MATRIX_KEY(1, 1, KEY_W) /* S11 */
- MATRIX_KEY(1, 2, KEY_E) /* S12 */
- MATRIX_KEY(1, 3, KEY_R) /* S13 */
- MATRIX_KEY(1, 4, KEY_T) /* S14 */
- MATRIX_KEY(1, 5, KEY_Y) /* S15 */
- MATRIX_KEY(1, 6, KEY_U) /* S16 */
- MATRIX_KEY(1, 7, KEY_I) /* S17 */
- MATRIX_KEY(2, 0, KEY_A) /* S18 */
- MATRIX_KEY(2, 1, KEY_S) /* S19 */
- MATRIX_KEY(2, 2, KEY_D) /* S20 */
- MATRIX_KEY(2, 3, KEY_F) /* S21 */
- MATRIX_KEY(2, 4, KEY_G) /* S22 */
- MATRIX_KEY(2, 5, KEY_H) /* S23 */
- MATRIX_KEY(2, 6, KEY_J) /* S24 */
- MATRIX_KEY(2, 7, KEY_K) /* S25 */
- MATRIX_KEY(3, 0, KEY_ESC) /* S26 */
- MATRIX_KEY(3, 1, KEY_Z) /* S27 */
- MATRIX_KEY(3, 2, KEY_X) /* S28 */
- MATRIX_KEY(3, 3, KEY_C) /* S29 */
- MATRIX_KEY(3, 4, KEY_V) /* S30 */
- MATRIX_KEY(3, 5, KEY_B) /* S31 */
- MATRIX_KEY(3, 6, KEY_N) /* S32 */
- MATRIX_KEY(3, 7, KEY_M) /* S33 */
- MATRIX_KEY(4, 0, KEY_TAB) /* S34 */
- MATRIX_KEY(4, 1, KEY_CAPSLOCK) /* S35 */
- MATRIX_KEY(4, 2, KEY_BACKSLASH) /* S36 */
- MATRIX_KEY(4, 3, KEY_APOSTROPHE) /* S37 */
- MATRIX_KEY(4, 4, KEY_COMMA) /* S38 */
- MATRIX_KEY(4, 5, KEY_DOT) /* S39 */
- MATRIX_KEY(4, 6, KEY_SLASH) /* S40 */
- MATRIX_KEY(4, 7, KEY_UP) /* S41 */
- MATRIX_KEY(5, 0, KEY_O) /* S42 */
- MATRIX_KEY(5, 1, KEY_L) /* S43 */
- MATRIX_KEY(5, 2, KEY_EQUAL) /* S44 */
- MATRIX_KEY(5, 3, KEY_QI_UPRED) /* S45 */
- MATRIX_KEY(5, 4, KEY_SPACE) /* S46 */
- MATRIX_KEY(5, 5, KEY_QI_QI) /* S47 */
- MATRIX_KEY(5, 6, KEY_RIGHTCTRL) /* S48 */
- MATRIX_KEY(5, 7, KEY_LEFT) /* S49 */
- MATRIX_KEY(6, 0, KEY_F8) /* S50 */
- MATRIX_KEY(6, 1, KEY_P) /* S51 */
- MATRIX_KEY(6, 2, KEY_BACKSPACE)/* S52 */
- MATRIX_KEY(6, 3, KEY_ENTER) /* S53 */
- MATRIX_KEY(6, 4, KEY_QI_VOLUP) /* S54 */
- MATRIX_KEY(6, 5, KEY_QI_VOLDOWN) /* S55 */
- MATRIX_KEY(6, 6, KEY_DOWN) /* S56 */
- MATRIX_KEY(6, 7, KEY_RIGHT) /* S57 */
-
- MATRIX_KEY(7, 0, KEY_LEFTSHIFT) /* S58 */
- MATRIX_KEY(7, 1, KEY_LEFTALT) /* S59 */
- MATRIX_KEY(7, 2, KEY_QI_FN) /* S60 */
- >;
+ linux,keymap =
+ <MATRIX_KEY(0, 0, KEY_F1)>, /* S2 */
+ <MATRIX_KEY(0, 1, KEY_F2)>, /* S3 */
+ <MATRIX_KEY(0, 2, KEY_F3)>, /* S4 */
+ <MATRIX_KEY(0, 3, KEY_F4)>, /* S5 */
+ <MATRIX_KEY(0, 4, KEY_F5)>, /* S6 */
+ <MATRIX_KEY(0, 5, KEY_F6)>, /* S7 */
+ <MATRIX_KEY(0, 6, KEY_F7)>, /* S8 */
+
+ <MATRIX_KEY(1, 0, KEY_Q)>, /* S10 */
+ <MATRIX_KEY(1, 1, KEY_W)>, /* S11 */
+ <MATRIX_KEY(1, 2, KEY_E)>, /* S12 */
+ <MATRIX_KEY(1, 3, KEY_R)>, /* S13 */
+ <MATRIX_KEY(1, 4, KEY_T)>, /* S14 */
+ <MATRIX_KEY(1, 5, KEY_Y)>, /* S15 */
+ <MATRIX_KEY(1, 6, KEY_U)>, /* S16 */
+ <MATRIX_KEY(1, 7, KEY_I)>, /* S17 */
+ <MATRIX_KEY(2, 0, KEY_A)>, /* S18 */
+ <MATRIX_KEY(2, 1, KEY_S)>, /* S19 */
+ <MATRIX_KEY(2, 2, KEY_D)>, /* S20 */
+ <MATRIX_KEY(2, 3, KEY_F)>, /* S21 */
+ <MATRIX_KEY(2, 4, KEY_G)>, /* S22 */
+ <MATRIX_KEY(2, 5, KEY_H)>, /* S23 */
+ <MATRIX_KEY(2, 6, KEY_J)>, /* S24 */
+ <MATRIX_KEY(2, 7, KEY_K)>, /* S25 */
+ <MATRIX_KEY(3, 0, KEY_ESC)>, /* S26 */
+ <MATRIX_KEY(3, 1, KEY_Z)>, /* S27 */
+ <MATRIX_KEY(3, 2, KEY_X)>, /* S28 */
+ <MATRIX_KEY(3, 3, KEY_C)>, /* S29 */
+ <MATRIX_KEY(3, 4, KEY_V)>, /* S30 */
+ <MATRIX_KEY(3, 5, KEY_B)>, /* S31 */
+ <MATRIX_KEY(3, 6, KEY_N)>, /* S32 */
+ <MATRIX_KEY(3, 7, KEY_M)>, /* S33 */
+ <MATRIX_KEY(4, 0, KEY_TAB)>, /* S34 */
+ <MATRIX_KEY(4, 1, KEY_CAPSLOCK)>, /* S35 */
+ <MATRIX_KEY(4, 2, KEY_BACKSLASH)>, /* S36 */
+ <MATRIX_KEY(4, 3, KEY_APOSTROPHE)>, /* S37 */
+ <MATRIX_KEY(4, 4, KEY_COMMA)>, /* S38 */
+ <MATRIX_KEY(4, 5, KEY_DOT)>, /* S39 */
+ <MATRIX_KEY(4, 6, KEY_SLASH)>, /* S40 */
+ <MATRIX_KEY(4, 7, KEY_UP)>, /* S41 */
+ <MATRIX_KEY(5, 0, KEY_O)>, /* S42 */
+ <MATRIX_KEY(5, 1, KEY_L)>, /* S43 */
+ <MATRIX_KEY(5, 2, KEY_EQUAL)>, /* S44 */
+ <MATRIX_KEY(5, 3, KEY_QI_UPRED)>, /* S45 */
+ <MATRIX_KEY(5, 4, KEY_SPACE)>, /* S46 */
+ <MATRIX_KEY(5, 5, KEY_QI_QI)>, /* S47 */
+ <MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>, /* S48 */
+ <MATRIX_KEY(5, 7, KEY_LEFT)>, /* S49 */
+ <MATRIX_KEY(6, 0, KEY_F8)>, /* S50 */
+ <MATRIX_KEY(6, 1, KEY_P)>, /* S51 */
+ <MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */
+ <MATRIX_KEY(6, 3, KEY_ENTER)>, /* S53 */
+ <MATRIX_KEY(6, 4, KEY_QI_VOLUP)>, /* S54 */
+ <MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>, /* S55 */
+ <MATRIX_KEY(6, 6, KEY_DOWN)>, /* S56 */
+ <MATRIX_KEY(6, 7, KEY_RIGHT)>, /* S57 */
+
+ <MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>, /* S58 */
+ <MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */
+ <MATRIX_KEY(7, 2, KEY_QI_FN)>; /* S60 */
};
spi {
@@ -255,12 +260,12 @@
#address-cells = <1>;
#size-cells = <0>;
- ingenic,bch-controller = <&ecc>;
+ ecc-engine = <&ecc>;
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc>;
- rb-gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+ rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>;
nand@1 {
reg = <1>;
@@ -318,7 +323,7 @@
pins_nemc: nemc {
function = "nand";
- groups = "nand-cs1";
+ groups = "nand-fre-fwe", "nand-cs1";
};
pins_uart0: uart0 {
diff --git a/dts/src/mips/ingenic/rs90.dts b/dts/src/mips/ingenic/rs90.dts
new file mode 100644
index 0000000000..e8df70dd42
--- /dev/null
+++ b/dts/src/mips/ingenic/rs90.dts
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4725b.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ compatible = "ylm,rs90", "ingenic,jz4725b";
+ model = "RS-90";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vmem: video-memory@1f00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x1f00000 0x100000>;
+ reusable;
+ };
+ };
+
+ vcc: regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc";
+ regulaor-min-microvolt = <3300000>;
+ regulaor-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 40000 0>;
+
+ brightness-levels = <0 16 32 48 64 80 112 144 192 255>;
+ default-brightness-level = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm3>;
+
+ power-supply = <&vcc>;
+ };
+
+ keys@0 {
+ compatible = "gpio-keys";
+
+ key-0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpc 10 GPIO_ACTIVE_LOW>;
+ };
+
+ key-1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpc 11 GPIO_ACTIVE_LOW>;
+ };
+
+ key-2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpb 31 GPIO_ACTIVE_LOW>;
+ };
+
+ key-3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpd 21 GPIO_ACTIVE_LOW>;
+ };
+
+ key-4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ gpios = <&gpc 31 GPIO_ACTIVE_LOW>;
+ };
+
+ key-5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+ };
+
+ key-6 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ gpios = <&gpc 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+
+ key-7 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpd 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys@1 {
+ compatible = "adc-keys";
+ io-channels = <&adc INGENIC_ADC_AUX>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1400000>;
+ poll-interval = <30>;
+
+ key@0 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ press-threshold-microvolt = <800000>;
+ };
+
+ key@1 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1100000>;
+ };
+ };
+
+ amp: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&vcc>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "rs90-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "INL", "LHPOUT",
+ "INR", "RHPOUT",
+ "Headphones", "LHPOUT",
+ "Headphones", "RHPOUT",
+ "Speaker", "OUTL",
+ "Speaker", "OUTR";
+ simple-audio-card,pin-switches = "Speaker";
+
+ simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>;
+ simple-audio-card,aux-devs = <&amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+
+ };
+
+ usb_phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_UDC_PHY>;
+ clock-names = "main_clk";
+ vcc-supply = <&vcc>;
+ };
+
+ panel {
+ compatible = "sharp,ls020b1dd01d";
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+ system-power-controller;
+};
+
+&udc {
+ phys = <&usb_phy>;
+};
+
+&pinctrl {
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit";
+ };
+
+ pins_nemc: nemc {
+ function = "nand";
+ groups = "nand-cs1", "nand-cle-ale", "nand-fre-fwe";
+ };
+
+ pins_pwm3: pwm3 {
+ function = "pwm3";
+ groups = "pwm3";
+ bias-disable;
+ };
+
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-8bit", "lcd-16bit", "lcd-special";
+ };
+};
+
+&mmc0 {
+ status = "disabled";
+};
+
+&mmc1 {
+ bus-width = <1>;
+ max-frequency = <48000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+
+ cd-gpios = <&gpc 20 GPIO_ACTIVE_LOW>;
+};
+
+&uart {
+ /*
+ * The pins for RX/TX are used for the right shoulder button and
+ * backlight PWM.
+ */
+ status = "disabled";
+};
+
+&nemc {
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4725b-nand";
+ reg = <1 0 0x4000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ecc-engine = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ rb-gpios = <&gpc 27 GPIO_ACTIVE_HIGH>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <8>;
+ nand-ecc-mode = "hw";
+ nand-is-boot-medium;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x20000>;
+ };
+
+ partition@20000 {
+ label = "system";
+ reg = <0x20000 0x0>;
+ };
+ };
+ };
+ };
+};
+
+&cgu {
+ /* Use 32kHz oscillator as the parent of the RTC clock */
+ assigned-clocks = <&cgu JZ4725B_CLK_RTC>;
+ assigned-clock-parents = <&cgu JZ4725B_CLK_OSC32K>;
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timer and clocksource, and use RTC as the
+ * parent for the watchdog clock.
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <&cgu JZ4725B_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>;
+};
+
+&lcd {
+ memory-region = <&vmem>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+};
+
+&lcd_ports {
+ port@0 {
+ reg = <0>;
+
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/dts/src/mips/ingenic/x1000.dtsi b/dts/src/mips/ingenic/x1000.dtsi
index 147f7d5c24..cc264cfff8 100644
--- a/dts/src/mips/ingenic/x1000.dtsi
+++ b/dts/src/mips/ingenic/x1000.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/ingenic,tcu.h>
-#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/clock/ingenic,x1000-cgu.h>
#include <dt-bindings/dma/x1000-dma.h>
/ {
@@ -8,6 +8,20 @@
#size-cells = <1>;
compatible = "ingenic,x1000", "ingenic,x1000e";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu X1000_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -38,19 +52,56 @@
};
cgu: x1000-cgu@10000000 {
- compatible = "ingenic,x1000-cgu";
+ compatible = "ingenic,x1000-cgu", "simple-mfd";
reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
#clock-cells = <1>;
clocks = <&exclk>, <&rtclk>;
clock-names = "ext", "rtc";
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,x1000-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu X1000_CLK_OTGPHY>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ rng: rng@d8 {
+ compatible = "ingenic,x1000-rng";
+ reg = <0xd8 0x8>;
+
+ status = "disabled";
+ };
+
+ mac_phy_ctrl: mac-phy-ctrl@e8 {
+ compatible = "syscon";
+ reg = <0xe8 0x4>;
+ };
+ };
+
+ ost: timer@12000000 {
+ compatible = "ingenic,x1000-ost";
+ reg = <0x12000000 0x3c>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1000_CLK_OST>;
+ clock-names = "ost";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
};
tcu: timer@10002000 {
- compatible = "ingenic,x1000-tcu",
- "ingenic,jz4770-tcu",
- "simple-mfd";
+ compatible = "ingenic,x1000-tcu", "simple-mfd";
reg = <0x10002000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -58,10 +109,11 @@
#clock-cells = <1>;
- clocks = <&cgu X1000_CLK_RTCLK
- &cgu X1000_CLK_EXCLK
- &cgu X1000_CLK_PCLK>;
- clock-names = "rtc", "ext", "pclk";
+ clocks = <&cgu X1000_CLK_RTCLK>,
+ <&cgu X1000_CLK_EXCLK>,
+ <&cgu X1000_CLK_PCLK>,
+ <&cgu X1000_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
#interrupt-cells = <1>;
@@ -76,6 +128,18 @@
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
+
+ pwm: pwm@40 {
+ compatible = "ingenic,x1000-pwm";
+ reg = <0x40 0x50>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>;
+ clock-names = "timer0", "timer1", "timer2", "timer3", "timer4";
+ };
};
rtc: rtc@10003000 {
@@ -156,6 +220,64 @@
};
};
+ uart0: serial@10030000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ ssi: spi@10043000 {
+ compatible = "ingenic,x1000-spi";
+ reg = <0x10043000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&cgu X1000_CLK_SSI>;
+ clock-names = "spi";
+
+ dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>,
+ <&pdma X1000_DMA_SSI0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
i2c0: i2c-controller@10050000 {
compatible = "ingenic,x1000-i2c";
reg = <0x10050000 0x1000>;
@@ -198,55 +320,58 @@
status = "disabled";
};
- uart0: serial@10030000 {
- compatible = "ingenic,x1000-uart";
- reg = <0x10030000 0x100>;
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1000-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
- interrupt-parent = <&intc>;
- interrupts = <51>;
+ #dma-cells = <2>;
- clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
- clock-names = "baud", "module";
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
- status = "disabled";
+ clocks = <&cgu X1000_CLK_PDMA>;
};
- uart1: serial@10031000 {
- compatible = "ingenic,x1000-uart";
- reg = <0x10031000 0x100>;
+ msc0: mmc@13450000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
interrupt-parent = <&intc>;
- interrupts = <50>;
+ interrupts = <37>;
- clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
- clock-names = "baud", "module";
+ clocks = <&cgu X1000_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
status = "disabled";
};
- uart2: serial@10032000 {
- compatible = "ingenic,x1000-uart";
- reg = <0x10032000 0x100>;
+ msc1: mmc@13460000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
interrupt-parent = <&intc>;
- interrupts = <49>;
-
- clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
- clock-names = "baud", "module";
+ interrupts = <36>;
- status = "disabled";
- };
+ clocks = <&cgu X1000_CLK_MSC1>;
+ clock-names = "mmc";
- pdma: dma-controller@13420000 {
- compatible = "ingenic,x1000-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
- #dma-cells = <2>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
- interrupt-parent = <&intc>;
- interrupts = <10>;
+ dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
- clocks = <&cgu X1000_CLK_PDMA>;
+ status = "disabled";
};
mac: ethernet@134b0000 {
@@ -260,6 +385,8 @@
clocks = <&cgu X1000_CLK_MAC>;
clock-names = "stmmaceth";
+ mode-reg = <&mac_phy_ctrl>;
+
status = "disabled";
mdio: mdio {
@@ -271,45 +398,41 @@
};
};
- msc0: mmc@13450000 {
- compatible = "ingenic,x1000-mmc";
- reg = <0x13450000 0x1000>;
+ otg: usb@13500000 {
+ compatible = "ingenic,x1000-otg";
+ reg = <0x13500000 0x40000>;
interrupt-parent = <&intc>;
- interrupts = <37>;
+ interrupts = <21>;
- clocks = <&cgu X1000_CLK_MSC0>;
- clock-names = "mmc";
+ clocks = <&cgu X1000_CLK_OTG>;
+ clock-names = "otg";
- cap-sd-highspeed;
- cap-mmc-highspeed;
- cap-sdio-irq;
+ phys = <&otg_phy>;
+ phy-names = "usb2-phy";
- dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
- <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
- dma-names = "rx", "tx";
+ g-rx-fifo-size = <768>;
+ g-np-tx-fifo-size = <256>;
+ g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
status = "disabled";
};
- msc1: mmc@13460000 {
- compatible = "ingenic,x1000-mmc";
- reg = <0x13460000 0x1000>;
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,x1000-i2s";
+ reg = <0x10020000 0x38>;
- interrupt-parent = <&intc>;
- interrupts = <36>;
+ #sound-dai-cells = <0>;
- clocks = <&cgu X1000_CLK_MSC1>;
- clock-names = "mmc";
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- cap-sdio-irq;
+ clocks = <&cgu X1000_CLK_AIC>,
+ <&cgu X1000_CLK_I2S>;
+ clock-names = "aic", "i2s";
- dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
- <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+ dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>,
+ <&pdma X1000_DMA_I2S0_TX 0xffffffff>;
dma-names = "rx", "tx";
-
- status = "disabled";
};
};
diff --git a/dts/src/mips/ingenic/x1830.dtsi b/dts/src/mips/ingenic/x1830.dtsi
new file mode 100644
index 0000000000..65a5da71c1
--- /dev/null
+++ b/dts/src/mips/ingenic/x1830.dtsi
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/ingenic,x1830-cgu.h>
+#include <dt-bindings/dma/x1830-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,x1830";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu2.0-mxu2.0";
+ reg = <0>;
+
+ clocks = <&cgu X1830_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ exclk: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtclk: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: x1830-cgu@10000000 {
+ compatible = "ingenic,x1830-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ #clock-cells = <1>;
+
+ clocks = <&exclk>, <&rtclk>;
+ clock-names = "ext", "rtc";
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,x1830-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu X1830_CLK_OTGPHY>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mac_phy_ctrl: mac-phy-ctrl@e8 {
+ compatible = "syscon";
+ reg = <0xe8 0x4>;
+ };
+ };
+
+ ost: timer@12000000 {
+ compatible = "ingenic,x1830-ost", "ingenic,x1000-ost";
+ reg = <0x12000000 0x3c>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1830_CLK_OST>;
+ clock-names = "ost";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1830_CLK_RTCLK>,
+ <&cgu X1830_CLK_EXCLK>,
+ <&cgu X1830_CLK_PCLK>,
+ <&cgu X1830_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ wdt: watchdog@0 {
+ compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x0 0x10>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1830_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,x1830-pinctrl";
+ reg = <0x10010000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&exclk>, <&cgu X1830_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&exclk>, <&cgu X1830_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ ssi0: spi@10043000 {
+ compatible = "ingenic,x1830-spi", "ingenic,x1000-spi";
+ reg = <0x10043000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&cgu X1830_CLK_SSI0>;
+ clock-names = "spi";
+
+ dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>,
+ <&pdma X1830_DMA_SSI0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ ssi1: spi@10044000 {
+ compatible = "ingenic,x1830-spi", "ingenic,x1000-spi";
+ reg = <0x10044000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&cgu X1830_CLK_SSI1>;
+ clock-names = "spi";
+
+ dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>,
+ <&pdma X1830_DMA_SSI1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ i2c0: i2c-controller@10050000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10050000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu X1830_CLK_SMB0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c-controller@10051000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10051000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu X1830_CLK_SMB1>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c-controller@10052000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10052000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu X1830_CLK_SMB2>;
+
+ status = "disabled";
+ };
+
+ dtrng: trng@10072000 {
+ compatible = "ingenic,x1830-dtrng";
+ reg = <0x10072000 0xc>;
+
+ clocks = <&cgu X1830_CLK_DTRNG>;
+
+ status = "disabled";
+ };
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1830-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1830_CLK_PDMA>;
+ };
+
+ msc0: mmc@13450000 {
+ compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1830_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1830_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: mmc@13460000 {
+ compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1830_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1830_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ mac: ethernet@134b0000 {
+ compatible = "ingenic,x1830-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1830_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ mode-reg = <&mac_phy_ctrl>;
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ otg: usb@13500000 {
+ compatible = "ingenic,x1830-otg";
+ reg = <0x13500000 0x40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+
+ clocks = <&cgu X1830_CLK_OTG>;
+ clock-names = "otg";
+
+ phys = <&otg_phy>;
+ phy-names = "usb2-phy";
+
+ g-rx-fifo-size = <768>;
+ g-np-tx-fifo-size = <256>;
+ g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
+
+ status = "disabled";
+ };
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-18 16:41:13 +0000