diff options
Diffstat (limited to 'dts/src/mips')
51 files changed, 1990 insertions, 323 deletions
diff --git a/dts/src/mips/brcm/bcm63268.dtsi b/dts/src/mips/brcm/bcm63268.dtsi index c3ce49ec67..7b788757cb 100644 --- a/dts/src/mips/brcm/bcm63268.dtsi +++ b/dts/src/mips/brcm/bcm63268.dtsi @@ -105,14 +105,27 @@ interrupts = <2>, <3>; }; - wdt: watchdog@1000009c { - compatible = "brcm,bcm7038-wdt"; - reg = <0x1000009c 0xc>; + timer-mfd@10000080 { + compatible = "brcm,bcm7038-twd", "simple-mfd", "syscon"; + reg = <0x10000080 0x30>; + ranges = <0x0 0x10000080 0x30>; + #address-cells = <1>; + #size-cells = <1>; - clocks = <&periph_osc>; - clock-names = "refclk"; + timer@0 { + compatible = "brcm,bcm6345-timer"; + reg = <0x0 0x1c>; + }; - timeout-sec = <30>; + wdt: watchdog@1c { + compatible = "brcm,bcm7038-wdt"; + reg = <0x1c 0xc>; + + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; }; uart0: serial@10000180 { diff --git a/dts/src/mips/brcm/bcm7425.dtsi b/dts/src/mips/brcm/bcm7425.dtsi index aa0b2d39c9..62588c53d3 100644 --- a/dts/src/mips/brcm/bcm7425.dtsi +++ b/dts/src/mips/brcm/bcm7425.dtsi @@ -584,4 +584,34 @@ }; }; }; + + pcie_0: pcie@8b20000 { + status = "disabled"; + compatible = "brcm,bcm7425-pcie"; + + ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000 + 0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000 + 0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000 + 0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>; + + reg = <0x10410000 0x19310>; + aspm-no-l0s; + device_type = "pci"; + msi-controller; + msi-parent = <&pcie_0>; + #address-cells = <0x3>; + #size-cells = <0x2>; + bus-range = <0x0 0xff>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + linux,pci-domain = <0x0>; + + interrupt-parent = <&periph_intc>; + interrupts = <37>, <37>; + interrupt-names = "pcie", "msi"; + #interrupt-cells = <0x1>; + interrupt-map = <0 0 0 1 &periph_intc 0x21 + 0 0 0 1 &periph_intc 0x22 + 0 0 0 1 &periph_intc 0x23 + 0 0 0 1 &periph_intc 0x24>; + }; }; diff --git a/dts/src/mips/brcm/bcm7435.dtsi b/dts/src/mips/brcm/bcm7435.dtsi index 8398b7f68b..cfdf9804e1 100644 --- a/dts/src/mips/brcm/bcm7435.dtsi +++ b/dts/src/mips/brcm/bcm7435.dtsi @@ -422,6 +422,7 @@ reg = <0x41c800 0x600>, <0x41d000 0x100>; interrupt-parent = <&hif_l2_intc>; interrupts = <24>, <4>; + interrupt-names = "nand_ctlrdy", "flash_dma_done"; status = "disabled"; }; @@ -599,4 +600,34 @@ }; }; }; + + pcie_0: pcie@8b20000 { + status = "disabled"; + compatible = "brcm,bcm7435-pcie"; + + ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000 + 0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000 + 0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000 + 0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>; + + reg = <0x10410000 0x19310>; + aspm-no-l0s; + device_type = "pci"; + msi-controller; + msi-parent = <&pcie_0>; + #address-cells = <0x3>; + #size-cells = <0x2>; + bus-range = <0x0 0xff>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + linux,pci-domain = <0x0>; + + interrupt-parent = <&periph_intc>; + interrupts = <39>, <39>; + interrupt-names = "pcie", "msi"; + #interrupt-cells = <0x1>; + interrupt-map = <0 0 0 1 &periph_intc 0x23 + 0 0 0 1 &periph_intc 0x24 + 0 0 0 1 &periph_intc 0x25 + 0 0 0 1 &periph_intc 0x26>; + }; }; diff --git a/dts/src/mips/brcm/bcm97358svmb.dts b/dts/src/mips/brcm/bcm97358svmb.dts index 522f2c40d6..c17fc14d48 100644 --- a/dts/src/mips/brcm/bcm97358svmb.dts +++ b/dts/src/mips/brcm/bcm97358svmb.dts @@ -78,7 +78,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/brcm/bcm97360svmb.dts b/dts/src/mips/brcm/bcm97360svmb.dts index 01f215b08d..c9b76f41e7 100644 --- a/dts/src/mips/brcm/bcm97360svmb.dts +++ b/dts/src/mips/brcm/bcm97360svmb.dts @@ -81,7 +81,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/brcm/bcm97425svmb.dts b/dts/src/mips/brcm/bcm97425svmb.dts index 9efecfe1e0..289a57b912 100644 --- a/dts/src/mips/brcm/bcm97425svmb.dts +++ b/dts/src/mips/brcm/bcm97425svmb.dts @@ -116,7 +116,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; @@ -152,3 +152,12 @@ &waketimer { status = "okay"; }; + +&pcie_0 { + status = "okay"; + /* 1GB Memc0, 1GB Memc1 */ + brcm,scb-sizes = <0 0x40000000 0 0x40000000>; + dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000 + 0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000 + 0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>; +}; diff --git a/dts/src/mips/brcm/bcm97435svmb.dts b/dts/src/mips/brcm/bcm97435svmb.dts index b653c6ff74..a0cf53e23c 100644 --- a/dts/src/mips/brcm/bcm97435svmb.dts +++ b/dts/src/mips/brcm/bcm97435svmb.dts @@ -128,3 +128,12 @@ &waketimer { status = "okay"; }; + +&pcie_0 { + status = "okay"; + /* 1GB Memc0, 1GB Memc1 */ + brcm,scb-sizes = <0 0x40000000 0 0x40000000>; + dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000 + 0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000 + 0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>; +}; diff --git a/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts b/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts index 2fdb4baad1..cb460eaf88 100644 --- a/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts +++ b/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts @@ -20,27 +20,27 @@ leds { compatible = "gpio-leds"; - usb1 { + led-usb1 { label = "usb1"; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; - usb2 { + led-usb2 { label = "usb2"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; - wps { + led-wps { label = "wps"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - wireless1 { + led-wireless1 { label = "5g"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; - wireless2 { + led-wireless2 { label = "2.4g"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts b/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts index e04237281b..c55845fd84 100644 --- a/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts +++ b/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts @@ -21,15 +21,15 @@ leds { compatible = "gpio-leds"; - usb { + led-usb { gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; - wps { + led-wps { gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - wireless { + led-wireless { label = "2.4g"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/mips/img/boston.dts b/dts/src/mips/img/boston.dts index 84328afa3a..72f7605d2e 100644 --- a/dts/src/mips/img/boston.dts +++ b/dts/src/mips/img/boston.dts @@ -125,7 +125,7 @@ #interrupt-cells = <1>; }; - pci2_root@0,0,0 { + pci2_root@0,0 { compatible = "pci10ee,7021"; reg = <0x00000000 0 0 0 0>; diff --git a/dts/src/mips/img/pistachio_marduk.dts b/dts/src/mips/img/pistachio_marduk.dts index a8708783f0..a8da2f992b 100644 --- a/dts/src/mips/img/pistachio_marduk.dts +++ b/dts/src/mips/img/pistachio_marduk.dts @@ -59,12 +59,12 @@ keys { compatible = "gpio-keys"; - button@1 { + button-1 { label = "Button 1"; linux,code = <0x101>; /* BTN_1 */ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; }; - button@2 { + button-2 { label = "Button 2"; linux,code = <0x102>; /* BTN_2 */ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts index b249a4f0f6..a141a699b7 100644 --- a/dts/src/mips/ingenic/ci20.dts +++ b/dts/src/mips/ingenic/ci20.dts @@ -31,7 +31,7 @@ gpio-keys { compatible = "gpio-keys"; - sw1 { + switch { label = "ci20:sw1"; linux,code = <KEY_F13>; gpios = <&gpd 17 GPIO_ACTIVE_HIGH>; @@ -42,66 +42,119 @@ leds { compatible = "gpio-leds"; - led0 { + led-0 { label = "ci20:red:led0"; gpios = <&gpc 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; - led1 { + led-1 { label = "ci20:red:led1"; gpios = <&gpc 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "nand-disk"; }; - led2 { + led-2 { label = "ci20:red:led2"; gpios = <&gpc 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu1"; }; - led3 { + led-3 { label = "ci20:red:led3"; gpios = <&gpc 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu0"; }; }; - eth0_power: fixedregulator@0 { + eth0_power: fixedregulator-0 { compatible = "regulator-fixed"; regulator-name = "eth0_power"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpb 25 GPIO_ACTIVE_LOW>; + gpio = <&gpb 25 0>; enable-active-high; }; + hdmi_out: connector { + compatible = "hdmi-connector"; + label = "HDMI OUT"; + type = "a"; + + ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>; + + port { + hdmi_con: endpoint { + remote-endpoint = <&dw_hdmi_out>; + }; + }; + }; + ir: ir { compatible = "gpio-ir-receiver"; gpios = <&gpe 3 GPIO_ACTIVE_LOW>; }; - wlan0_power: fixedregulator@1 { + bt_power: fixedregulator-1 { compatible = "regulator-fixed"; - regulator-name = "wlan0_power"; + regulator-name = "bt_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <1400>; + + vin-supply = <&vcc_50>; - gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + gpio = <&gpb 19 0>; enable-active-high; }; - otg_power: fixedregulator@2 { + otg_power: fixedregulator-2 { compatible = "regulator-fixed"; regulator-name = "otg_power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpf 14 GPIO_ACTIVE_LOW>; + gpio = <&gpf 15 0>; enable-active-high; }; + + wifi_power: fixedregulator-4 { + compatible = "regulator-fixed"; + + regulator-name = "wifi_power"; + + /* + * Technically it's 5V, the WiFi chip has its own internal + * regulators; but the MMC/SD subsystem won't accept such a + * value. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <150000>; + + vin-supply = <&bt_power>; + }; + + vcc_33v: fixedregulator-5 { + compatible = "regulator-fixed"; + + regulator-name = "vcc_33v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + + clocks = <&rtc_dev>; + clock-names = "ext_clock"; + }; }; &ext { @@ -114,11 +167,13 @@ * precision. */ assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>, - <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>; + <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>, + <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_MSCMUX>; assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>, <&cgu JZ4780_CLK_MPLL>, - <&cgu JZ4780_CLK_SSIPLL>; - assigned-clock-rates = <48000000>, <0>, <54000000>; + <&cgu JZ4780_CLK_SSIPLL>, + <0>, <&cgu JZ4780_CLK_MPLL>; + assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>; }; &tcu { @@ -145,24 +200,33 @@ pinctrl-0 = <&pins_mmc0>; cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_33v>; + vqmmc-supply = <&vcc_33v>; }; &mmc1 { status = "okay"; bus-width = <4>; - max-frequency = <50000000>; + max-frequency = <25000000>; + mmc-pwrseq = <&wifi_pwrseq>; + vmmc-supply = <&wifi_power>; + vqmmc-supply = <&wifi_io>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&pins_mmc1>; - brcmf: wifi@1 { -/* reg = <4>;*/ - compatible = "brcm,bcm4330-fmac"; - vcc-supply = <&wlan0_power>; - device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpd>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; }; }; @@ -189,11 +253,20 @@ bluetooth { compatible = "brcm,bcm4330-bt"; - reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; - vcc-supply = <&wlan0_power>; + + vbat-supply = <&bt_power>; + vddio-supply = <&wifi_io>; + + interrupt-parent = <&gpf>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + + clocks = <&rtc_dev>; + clock-names = "lpo"; + + reset-gpios = <&gpf 8 GPIO_ACTIVE_LOW>; device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_HIGH>; }; }; @@ -222,59 +295,54 @@ act8600: act8600@5a { compatible = "active-semi,act8600"; reg = <0x5a>; - status = "okay"; regulators { - vddcore: SUDCDC1 { - regulator-name = "DCDC_REG1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + vddcore: DCDC1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + vp1-supply = <&vcc_33v>; regulator-always-on; }; - vddmem: SUDCDC2 { - regulator-name = "DCDC_REG2"; + vddmem: DCDC2 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; + vp2-supply = <&vcc_33v>; regulator-always-on; }; - vcc_33: SUDCDC3 { - regulator-name = "DCDC_REG3"; + vcc_33: DCDC3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vp3-supply = <&vcc_33v>; regulator-always-on; }; - vcc_50: SUDCDC4 { - regulator-name = "SUDCDC_REG4"; + vcc_50: SUDCDC_REG4 { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; - vcc_25: LDO_REG5 { - regulator-name = "LDO_REG5"; + vcc_25: LDO5 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; + inl-supply = <&vcc_33v>; regulator-always-on; }; - wifi_io: LDO_REG6 { - regulator-name = "LDO_REG6"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; + wifi_io: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-settling-time-us = <150000>; + inl-supply = <&vcc_33v>; }; - vcc_28: LDO_REG7 { - regulator-name = "LDO_REG7"; + cim_io_28: LDO7 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; + inl-supply = <&vcc_33v>; }; - vcc_15: LDO_REG8 { - regulator-name = "LDO_REG8"; + cim_io_15: LDO8 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - regulator-always-on; + inl-supply = <&vcc_33v>; }; vrtc_18: LDO_REG9 { - regulator-name = "LDO_REG9"; /* Despite the datasheet stating 3.3V * for REG9 and the driver expecting that, * REG9 outputs 1.8V. @@ -288,7 +356,6 @@ regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "LDO_REG10"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -348,7 +415,7 @@ #address-cells = <1>; #size-cells = <0>; - ingenic,bch-controller = <&bch>; + ecc-engine = <&bch>; ingenic,nemc-tAS = <10>; ingenic,nemc-tAH = <5>; @@ -414,8 +481,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pins_nemc_cs6>; - reg = <6 0 1 /* addr */ - 6 2 1>; /* data */ + reg = <6 0 1>, /* addr */ + <6 2 1>; /* data */ ingenic,nemc-tAS = <15>; ingenic,nemc-tAH = <10>; @@ -423,11 +490,11 @@ ingenic,nemc-tAW = <50>; ingenic,nemc-tSTRV = <100>; - reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; vcc-supply = <ð0_power>; interrupt-parent = <&gpe>; - interrupts = <19 4>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; nvmem-cells = <ð0_addr>; nvmem-cell-names = "mac-address"; @@ -509,6 +576,12 @@ bias-disable; }; + pins_hdmi_ddc: hdmi_ddc { + function = "hdmi-ddc"; + groups = "hdmi-ddc"; + bias-disable; + }; + pins_nemc: nemc { function = "nemc"; groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; @@ -539,3 +612,39 @@ bias-disable; }; }; + +&hdmi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_hdmi_ddc>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dw_hdmi_in: endpoint { + remote-endpoint = <&lcd_out>; + }; + }; + + port@1 { + reg = <1>; + dw_hdmi_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; +}; + +&lcdc0 { + status = "okay"; + + port { + lcd_out: endpoint { + remote-endpoint = <&dw_hdmi_in>; + }; + }; +}; diff --git a/dts/src/mips/ingenic/cu1000-neo.dts b/dts/src/mips/ingenic/cu1000-neo.dts index f98cf029ef..c89abf94e7 100644 --- a/dts/src/mips/ingenic/cu1000-neo.dts +++ b/dts/src/mips/ingenic/cu1000-neo.dts @@ -31,42 +31,6 @@ }; }; - ssi: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&gpd 2 GPIO_ACTIVE_HIGH>; - miso-gpios = <&gpd 3 GPIO_ACTIVE_HIGH>; - sck-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpd 1 GPIO_ACTIVE_HIGH>; - - status = "okay"; - - spi-max-frequency = <50000000>; - - sc16is752: expander@0 { - compatible = "nxp,sc16is752"; - reg = <0>; /* CE0 */ - spi-max-frequency = <4000000>; - - clocks = <&exclk_sc16is752>; - - interrupt-parent = <&gpc>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - - gpio-controller; - #gpio-cells = <2>; - - exclk_sc16is752: sc16is752 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - }; - }; - wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -90,7 +54,7 @@ &ost { /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; assigned-clock-rates = <1500000>, <1500000>; }; @@ -101,6 +65,39 @@ pinctrl-0 = <&pins_uart2>; }; +&ssi { + status = "okay"; + + num-cs = <2>; + cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_ssi>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpc>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; +}; + &i2c0 { status = "okay"; @@ -192,6 +189,12 @@ bias-pull-up; }; + pins_ssi: ssi { + function = "ssi"; + groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d"; + bias-disable; + }; + pins_i2c0: i2c0 { function = "i2c0"; groups = "i2c0-data"; diff --git a/dts/src/mips/ingenic/cu1830-neo.dts b/dts/src/mips/ingenic/cu1830-neo.dts index cfcb40edb7..3c77849833 100644 --- a/dts/src/mips/ingenic/cu1830-neo.dts +++ b/dts/src/mips/ingenic/cu1830-neo.dts @@ -31,42 +31,6 @@ }; }; - ssi0: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&gpc 12 GPIO_ACTIVE_HIGH>; - miso-gpios = <&gpc 11 GPIO_ACTIVE_HIGH>; - sck-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpc 16 GPIO_ACTIVE_HIGH>; - - status = "okay"; - - spi-max-frequency = <50000000>; - - sc16is752: expander@0 { - compatible = "nxp,sc16is752"; - reg = <0>; /* CE0 */ - spi-max-frequency = <4000000>; - - clocks = <&exclk_sc16is752>; - - interrupt-parent = <&gpb>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - - gpio-controller; - #gpio-cells = <2>; - - exclk_sc16is752: sc16is752 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - }; - }; - wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -90,7 +54,7 @@ &ost { /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; assigned-clock-rates = <1500000>, <1500000>; }; @@ -101,6 +65,38 @@ pinctrl-0 = <&pins_uart1>; }; +&ssi0 { + status = "okay"; + + num-cs = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_ssi0>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpb>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; +}; + &i2c0 { status = "okay"; @@ -196,6 +192,12 @@ bias-pull-up; }; + pins_ssi0: ssi0 { + function = "ssi0"; + groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1"; + bias-disable; + }; + pins_i2c0: i2c0 { function = "i2c0"; groups = "i2c0-data"; diff --git a/dts/src/mips/ingenic/gcw0.dts b/dts/src/mips/ingenic/gcw0.dts index 4abb031841..5d33f26fd2 100644 --- a/dts/src/mips/ingenic/gcw0.dts +++ b/dts/src/mips/ingenic/gcw0.dts @@ -130,89 +130,86 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - button@0 { + button-0 { label = "D-pad up"; linux,code = <KEY_UP>; linux,can-disable; gpios = <&gpe 21 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "D-pad down"; linux,code = <KEY_DOWN>; linux,can-disable; gpios = <&gpe 25 GPIO_ACTIVE_LOW>; }; - button@2 { + button-2 { label = "D-pad left"; linux,code = <KEY_LEFT>; linux,can-disable; gpios = <&gpe 23 GPIO_ACTIVE_LOW>; }; - button@3 { + button-3 { label = "D-pad right"; linux,code = <KEY_RIGHT>; linux,can-disable; gpios = <&gpe 24 GPIO_ACTIVE_LOW>; }; - button@4 { + button-4 { label = "Button A"; linux,code = <KEY_LEFTCTRL>; linux,can-disable; gpios = <&gpe 29 GPIO_ACTIVE_LOW>; }; - button@5 { + button-5 { label = "Button B"; linux,code = <KEY_LEFTALT>; linux,can-disable; gpios = <&gpe 20 GPIO_ACTIVE_LOW>; }; - button@6 { + button-6 { label = "Button Y"; linux,code = <KEY_SPACE>; linux,can-disable; gpios = <&gpe 27 GPIO_ACTIVE_LOW>; }; - button@7 { + button-7 { label = "Button X"; linux,code = <KEY_LEFTSHIFT>; linux,can-disable; gpios = <&gpe 28 GPIO_ACTIVE_LOW>; }; - button@8 { + button-8 { label = "Left shoulder button"; linux,code = <KEY_TAB>; linux,can-disable; gpios = <&gpb 20 GPIO_ACTIVE_LOW>; }; - button@9 { + button-9 { label = "Right shoulder button"; linux,code = <KEY_BACKSPACE>; linux,can-disable; gpios = <&gpe 26 GPIO_ACTIVE_LOW>; }; - button@10 { + button-10 { label = "Start button"; linux,code = <KEY_ENTER>; linux,can-disable; gpios = <&gpb 21 GPIO_ACTIVE_LOW>; }; - button@11 { + button-11 { label = "Select button"; linux,code = <KEY_ESC>; linux,can-disable; @@ -223,7 +220,7 @@ gpios = <&gpd 18 GPIO_ACTIVE_HIGH>; }; - button@12 { + button-12 { label = "Power slider"; linux,code = <KEY_POWER>; linux,can-disable; @@ -231,7 +228,7 @@ wakeup-source; }; - button@13 { + button-13 { label = "Power hold"; linux,code = <KEY_PAUSE>; linux,can-disable; diff --git a/dts/src/mips/ingenic/jz4725b.dtsi b/dts/src/mips/ingenic/jz4725b.dtsi index 0c6a5a4266..c5c5a094c3 100644 --- a/dts/src/mips/ingenic/jz4725b.dtsi +++ b/dts/src/mips/ingenic/jz4725b.dtsi @@ -198,11 +198,8 @@ #sound-dai-cells = <0>; - clocks = <&cgu JZ4725B_CLK_AIC>, - <&cgu JZ4725B_CLK_I2S>, - <&cgu JZ4725B_CLK_EXT>, - <&cgu JZ4725B_CLK_PLL_HALF>; - clock-names = "aic", "i2s", "ext", "pll half"; + clocks = <&cgu JZ4725B_CLK_AIC>, <&cgu JZ4725B_CLK_I2S>; + clock-names = "aic", "i2s"; interrupt-parent = <&intc>; interrupts = <10>; @@ -321,7 +318,7 @@ lcd: lcd-controller@13050000 { compatible = "ingenic,jz4725b-lcd"; - reg = <0x13050000 0x1000>; + reg = <0x13050000 0x130>; /* tbc */ interrupt-parent = <&intc>; interrupts = <31>; @@ -369,7 +366,6 @@ rom: memory@1fc00000 { compatible = "mtd-rom"; - probe-type = "map_rom"; reg = <0x1fc00000 0x2000>; bank-width = <4>; diff --git a/dts/src/mips/ingenic/jz4740.dtsi b/dts/src/mips/ingenic/jz4740.dtsi index 772542e1f2..bdd6f4d82e 100644 --- a/dts/src/mips/ingenic/jz4740.dtsi +++ b/dts/src/mips/ingenic/jz4740.dtsi @@ -192,11 +192,8 @@ interrupt-parent = <&intc>; interrupts = <18>; - clocks = <&cgu JZ4740_CLK_AIC>, - <&cgu JZ4740_CLK_I2S>, - <&cgu JZ4740_CLK_EXT>, - <&cgu JZ4740_CLK_PLL_HALF>; - clock-names = "aic", "i2s", "ext", "pll half"; + clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2S>; + clock-names = "aic", "i2s"; dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>; dma-names = "rx", "tx"; @@ -323,7 +320,7 @@ lcd: lcd-controller@13050000 { compatible = "ingenic,jz4740-lcd"; - reg = <0x13050000 0x1000>; + reg = <0x13050000 0x60>; /* LCDCMD1+4 */ interrupt-parent = <&intc>; interrupts = <30>; diff --git a/dts/src/mips/ingenic/jz4770.dtsi b/dts/src/mips/ingenic/jz4770.dtsi index dfe74328ae..504e895e91 100644 --- a/dts/src/mips/ingenic/jz4770.dtsi +++ b/dts/src/mips/ingenic/jz4770.dtsi @@ -238,9 +238,8 @@ #sound-dai-cells = <0>; - clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>, - <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>; - clock-names = "aic", "i2s", "ext", "pll half"; + clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>; + clock-names = "aic", "i2s"; interrupt-parent = <&intc>; interrupts = <34>; @@ -399,7 +398,7 @@ lcd: lcd-controller@13050000 { compatible = "ingenic,jz4770-lcd"; - reg = <0x13050000 0x300>; + reg = <0x13050000 0x130>; /* tbc */ interrupt-parent = <&intc>; interrupts = <31>; @@ -462,7 +461,6 @@ rom: memory@1fc00000 { compatible = "mtd-rom"; - probe-type = "map_rom"; reg = <0x1fc00000 0x2000>; bank-width = <4>; diff --git a/dts/src/mips/ingenic/jz4780.dtsi b/dts/src/mips/ingenic/jz4780.dtsi index b0a4e2e019..18affff85c 100644 --- a/dts/src/mips/ingenic/jz4780.dtsi +++ b/dts/src/mips/ingenic/jz4780.dtsi @@ -155,6 +155,8 @@ clocks = <&cgu JZ4780_CLK_RTCLK>; clock-names = "rtc"; + + #clock-cells = <0>; }; pinctrl: pin-controller@10010000 { @@ -444,6 +446,46 @@ status = "disabled"; }; + hdmi: hdmi@10180000 { + compatible = "ingenic,jz4780-dw-hdmi"; + reg = <0x10180000 0x8000>; + reg-io-width = <4>; + + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; + clock-names = "iahb", "isfr"; + + interrupt-parent = <&intc>; + interrupts = <3>; + + status = "disabled"; + }; + + lcdc0: lcdc0@13050000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x13050000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <31>; + + status = "disabled"; + }; + + lcdc1: lcdc1@130a0000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x130a0000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <23>; + + status = "disabled"; + }; + nemc: nemc@13410000 { compatible = "ingenic,jz4780-nemc", "simple-mfd"; reg = <0x13410000 0x10000>; @@ -470,7 +512,7 @@ #address-cells = <1>; #size-cells = <1>; - eth0_addr: eth-mac-addr@0x22 { + eth0_addr: eth-mac-addr@22 { reg = <0x22 0x6>; }; }; @@ -537,7 +579,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,jz4780-otg", "snps,dwc2"; + compatible = "ingenic,jz4780-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; diff --git a/dts/src/mips/ingenic/qi_lb60.dts b/dts/src/mips/ingenic/qi_lb60.dts index ba02189715..24f987244a 100644 --- a/dts/src/mips/ingenic/qi_lb60.dts +++ b/dts/src/mips/ingenic/qi_lb60.dts @@ -27,7 +27,7 @@ stdout-path = &uart0; }; - vcc: regulator@0 { + vcc: regulator-0 { compatible = "regulator-fixed"; regulator-name = "vcc"; @@ -36,7 +36,7 @@ regulator-always-on; }; - mmc_power: regulator@1 { + mmc_power: regulator-1 { compatible = "regulator-fixed"; regulator-name = "mmc_vcc"; gpio = <&gpd 2 0>; @@ -45,7 +45,7 @@ regulator-max-microvolt = <3300000>; }; - amp_supply: regulator@2 { + amp_supply: regulator-2 { compatible = "regulator-fixed"; regulator-name = "amp_supply"; gpio = <&gpd 4 0>; diff --git a/dts/src/mips/ingenic/rs90.dts b/dts/src/mips/ingenic/rs90.dts index 74fee7f013..e8df70dd42 100644 --- a/dts/src/mips/ingenic/rs90.dts +++ b/dts/src/mips/ingenic/rs90.dts @@ -52,53 +52,51 @@ keys@0 { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - key@0 { + key-0 { label = "D-pad up"; linux,code = <KEY_UP>; gpios = <&gpc 10 GPIO_ACTIVE_LOW>; }; - key@1 { + key-1 { label = "D-pad down"; linux,code = <KEY_DOWN>; gpios = <&gpc 11 GPIO_ACTIVE_LOW>; }; - key@2 { + key-2 { label = "D-pad left"; linux,code = <KEY_LEFT>; gpios = <&gpb 31 GPIO_ACTIVE_LOW>; }; - key@3 { + key-3 { label = "D-pad right"; linux,code = <KEY_RIGHT>; gpios = <&gpd 21 GPIO_ACTIVE_LOW>; }; - key@4 { + key-4 { label = "Button A"; linux,code = <KEY_LEFTCTRL>; gpios = <&gpc 31 GPIO_ACTIVE_LOW>; }; - key@5 { + key-5 { label = "Button B"; linux,code = <KEY_LEFTALT>; gpios = <&gpc 30 GPIO_ACTIVE_LOW>; }; - key@6 { + key-6 { label = "Right shoulder button"; linux,code = <KEY_BACKSPACE>; gpios = <&gpc 12 GPIO_ACTIVE_LOW>; debounce-interval = <10>; }; - key@7 { + key-7 { label = "Start button"; linux,code = <KEY_ENTER>; gpios = <&gpd 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/ingenic/x1000.dtsi b/dts/src/mips/ingenic/x1000.dtsi index 8bd27edef2..cc264cfff8 100644 --- a/dts/src/mips/ingenic/x1000.dtsi +++ b/dts/src/mips/ingenic/x1000.dtsi @@ -111,8 +111,9 @@ clocks = <&cgu X1000_CLK_RTCLK>, <&cgu X1000_CLK_EXCLK>, - <&cgu X1000_CLK_PCLK>; - clock-names = "rtc", "ext", "pclk"; + <&cgu X1000_CLK_PCLK>, + <&cgu X1000_CLK_TCU>; + clock-names = "rtc", "ext", "pclk", "tcu"; interrupt-controller; #interrupt-cells = <1>; @@ -127,6 +128,18 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,x1000-pwm"; + reg = <0x40 0x50>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>; + clock-names = "timer0", "timer1", "timer2", "timer3", "timer4"; + }; }; rtc: rtc@10003000 { @@ -246,6 +259,25 @@ status = "disabled"; }; + ssi: spi@10043000 { + compatible = "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1000_CLK_SSI>; + clock-names = "spi"; + + dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>, + <&pdma X1000_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c-controller@10050000 { compatible = "ingenic,x1000-i2c"; reg = <0x10050000 0x1000>; @@ -291,6 +323,7 @@ pdma: dma-controller@13420000 { compatible = "ingenic,x1000-dma"; reg = <0x13420000 0x400>, <0x13421000 0x40>; + #dma-cells = <2>; interrupt-parent = <&intc>; @@ -366,7 +399,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,x1000-otg", "snps,dwc2"; + compatible = "ingenic,x1000-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; @@ -384,4 +417,22 @@ status = "disabled"; }; + + aic: audio-controller@10020000 { + compatible = "ingenic,x1000-i2s"; + reg = <0x10020000 0x38>; + + #sound-dai-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <1>; + + clocks = <&cgu X1000_CLK_AIC>, + <&cgu X1000_CLK_I2S>; + clock-names = "aic", "i2s"; + + dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>, + <&pdma X1000_DMA_I2S0_TX 0xffffffff>; + dma-names = "rx", "tx"; + }; }; diff --git a/dts/src/mips/ingenic/x1830.dtsi b/dts/src/mips/ingenic/x1830.dtsi index 2595df8671..65a5da71c1 100644 --- a/dts/src/mips/ingenic/x1830.dtsi +++ b/dts/src/mips/ingenic/x1830.dtsi @@ -104,8 +104,9 @@ clocks = <&cgu X1830_CLK_RTCLK>, <&cgu X1830_CLK_EXCLK>, - <&cgu X1830_CLK_PCLK>; - clock-names = "rtc", "ext", "pclk"; + <&cgu X1830_CLK_PCLK>, + <&cgu X1830_CLK_TCU>; + clock-names = "rtc", "ext", "pclk", "tcu"; interrupt-controller; #interrupt-cells = <1>; @@ -120,6 +121,20 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; }; rtc: rtc@10003000 { @@ -226,6 +241,44 @@ status = "disabled"; }; + ssi0: spi@10043000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <9>; + + clocks = <&cgu X1830_CLK_SSI0>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>, + <&pdma X1830_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + ssi1: spi@10044000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10044000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1830_CLK_SSI1>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>, + <&pdma X1830_DMA_SSI1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c-controller@10050000 { compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; reg = <0x10050000 0x1000>; @@ -280,6 +333,7 @@ pdma: dma-controller@13420000 { compatible = "ingenic,x1830-dma"; reg = <0x13420000 0x400>, <0x13421000 0x40>; + #dma-cells = <2>; interrupt-parent = <&intc>; @@ -355,7 +409,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,x1830-otg", "snps,dwc2"; + compatible = "ingenic,x1830-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; diff --git a/dts/src/mips/lantiq/danube.dtsi b/dts/src/mips/lantiq/danube.dtsi index 510be63c8b..7a7ba66aa5 100644 --- a/dts/src/mips/lantiq/danube.dtsi +++ b/dts/src/mips/lantiq/danube.dtsi @@ -40,7 +40,6 @@ eiu0: eiu@101000 { #interrupt-cells = <1>; interrupt-controller; - interrupt-parent; compatible = "lantiq,eiu-xway"; reg = <0x101000 0x1000>; }; diff --git a/dts/src/mips/lantiq/easy50712.dts b/dts/src/mips/lantiq/danube_easy50712.dts index 1ce20b7d05..1ce20b7d05 100644 --- a/dts/src/mips/lantiq/easy50712.dts +++ b/dts/src/mips/lantiq/danube_easy50712.dts diff --git a/dts/src/mips/loongson/loongson64-2k1000.dtsi b/dts/src/mips/loongson/loongson64-2k1000.dtsi index bfc3d3243e..ee3e2153dd 100644 --- a/dts/src/mips/loongson/loongson64-2k1000.dtsi +++ b/dts/src/mips/loongson/loongson64-2k1000.dtsi @@ -52,6 +52,11 @@ 0 0x40000000 0 0x40000000 0 0x40000000 0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>; + pm: reset-controller@1fe07000 { + compatible = "loongson,ls2k-pm"; + reg = <0 0x1fe07000 0 0x422>; + }; + liointc0: interrupt-controller@1fe11400 { compatible = "loongson,liointc-2.0"; reg = <0 0x1fe11400 0 0x40>, @@ -92,6 +97,13 @@ <0x00000000>; /* int3 */ }; + rtc0: rtc@1fe07800 { + compatible = "loongson,ls2k1000-rtc"; + reg = <0 0x1fe07800 0 0x78>; + interrupt-parent = <&liointc0>; + interrupts = <60 IRQ_TYPE_LEVEL_LOW>; + }; + uart0: serial@1fe00000 { compatible = "ns16550a"; reg = <0 0x1fe00000 0 0x8>; @@ -118,8 +130,7 @@ compatible = "pci0014,7a03.0", "pci0014,7a03", "pciclass0c0320", - "pciclass0c03", - "loongson, pci-gmac"; + "pciclass0c03"; reg = <0x1800 0x0 0x0 0x0 0x0>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>, diff --git a/dts/src/mips/loongson/ls7a-pch.dtsi b/dts/src/mips/loongson/ls7a-pch.dtsi index 2f45fce2cd..cce9428afc 100644 --- a/dts/src/mips/loongson/ls7a-pch.dtsi +++ b/dts/src/mips/loongson/ls7a-pch.dtsi @@ -19,6 +19,13 @@ #interrupt-cells = <2>; }; + rtc0: rtc@100d0100 { + compatible = "loongson,ls7a-rtc"; + reg = <0 0x100d0100 0 0x78>; + interrupt-parent = <&pic>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + }; + ls7a_uart0: serial@10080000 { compatible = "ns16550a"; reg = <0 0x10080000 0 0x100>; @@ -186,8 +193,7 @@ compatible = "pci0014,7a03.0", "pci0014,7a03", "pciclass020000", - "pciclass0200", - "loongson, pci-gmac"; + "pciclass0200"; reg = <0x1800 0x0 0x0 0x0 0x0>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, diff --git a/dts/src/mips/mobileye/eyeq5-epm5.dts b/dts/src/mips/mobileye/eyeq5-epm5.dts new file mode 100644 index 0000000000..6898b2d826 --- /dev/null +++ b/dts/src/mips/mobileye/eyeq5-epm5.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright 2023 Mobileye Vision Technologies Ltd. + */ + +/dts-v1/; + +#include "eyeq5.dtsi" + +/ { + compatible = "mobileye,eyeq5-epm5", "mobileye,eyeq5"; + model = "Mobile EyeQ5 MP5 Evaluation board"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0x02000000>, + <0x8 0x02000000 0x0 0x7E000000>; + }; +}; diff --git a/dts/src/mips/mobileye/eyeq5-fixed-clocks.dtsi b/dts/src/mips/mobileye/eyeq5-fixed-clocks.dtsi new file mode 100644 index 0000000000..78f5533a95 --- /dev/null +++ b/dts/src/mips/mobileye/eyeq5-fixed-clocks.dtsi @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright 2023 Mobileye Vision Technologies Ltd. + */ + +/ { + /* Fixed clock */ + pll_cpu: pll-cpu { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1500000000>; + }; + + pll_vdi: pll-vdi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1280000000>; + }; + + pll_per: pll-per { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2000000000>; + }; + + pll_ddr0: pll-ddr0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1857210000>; + }; + + pll_ddr1: pll-ddr1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1857210000>; + }; + +/* PLL_CPU derivatives */ + occ_cpu: occ-cpu { + compatible = "fixed-factor-clock"; + clocks = <&pll_cpu>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + si_css0_ref_clk: si-css0-ref-clk { /* gate ClkRstGen_si_css0_ref */ + compatible = "fixed-factor-clock"; + clocks = <&occ_cpu>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + cpc_clk: cpc-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core0_clk: core0-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core1_clk: core1-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core2_clk: core2-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core3_clk: core3-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + cm_clk: cm-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + mem_clk: mem-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + occ_isram: occ-isram { + compatible = "fixed-factor-clock"; + clocks = <&pll_cpu>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + isram_clk: isram-clk { /* gate ClkRstGen_isram */ + compatible = "fixed-factor-clock"; + clocks = <&occ_isram>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + occ_dbu: occ-dbu { + compatible = "fixed-factor-clock"; + clocks = <&pll_cpu>; + #clock-cells = <0>; + clock-div = <10>; + clock-mult = <1>; + }; + si_dbu_tp_pclk: si-dbu-tp-pclk { /* gate ClkRstGen_dbu */ + compatible = "fixed-factor-clock"; + clocks = <&occ_dbu>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; +/* PLL_VDI derivatives */ + occ_vdi: occ-vdi { + compatible = "fixed-factor-clock"; + clocks = <&pll_vdi>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + vdi_clk: vdi-clk { /* gate ClkRstGen_vdi */ + compatible = "fixed-factor-clock"; + clocks = <&occ_vdi>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + occ_can_ser: occ-can-ser { + compatible = "fixed-factor-clock"; + clocks = <&pll_vdi>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + }; + can_ser_clk: can-ser-clk { /* gate ClkRstGen_can_ser */ + compatible = "fixed-factor-clock"; + clocks = <&occ_can_ser>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + i2c_ser_clk: i2c-ser-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_vdi>; + #clock-cells = <0>; + clock-div = <20>; + clock-mult = <1>; + }; +/* PLL_PER derivatives */ + occ_periph: occ-periph { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + }; + periph_clk: periph-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + can_clk: can-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + spi_clk: spi-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + i2c_clk: i2c-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "i2c_clk"; + }; + timer_clk: timer-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "timer_clk"; + }; + gpio_clk: gpio-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "gpio_clk"; + }; + emmc_sys_clk: emmc-sys-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <10>; + clock-mult = <1>; + clock-output-names = "emmc_sys_clk"; + }; + ccf_ctrl_clk: ccf-ctrl-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "ccf_ctrl_clk"; + }; + occ_mjpeg_core: occ-mjpeg-core { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "occ_mjpeg_core"; + }; + hsm_clk: hsm-clk { /* gate ClkRstGen_hsm */ + compatible = "fixed-factor-clock"; + clocks = <&occ_mjpeg_core>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "hsm_clk"; + }; + mjpeg_core_clk: mjpeg-core-clk { /* gate ClkRstGen_mjpeg_gen */ + compatible = "fixed-factor-clock"; + clocks = <&occ_mjpeg_core>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "mjpeg_core_clk"; + }; + fcmu_a_clk: fcmu-a-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <20>; + clock-mult = <1>; + clock-output-names = "fcmu_a_clk"; + }; + occ_pci_sys: occ-pci-sys { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "occ_pci_sys"; + }; + pclk: pclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; /* 250MHz */ + }; + tsu_clk: tsu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; /* 125MHz */ + }; +}; diff --git a/dts/src/mips/mobileye/eyeq5.dtsi b/dts/src/mips/mobileye/eyeq5.dtsi new file mode 100644 index 0000000000..6cc5980e2f --- /dev/null +++ b/dts/src/mips/mobileye/eyeq5.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* +* Copyright 2023 Mobileye Vision Technologies Ltd. +*/ + +#include <dt-bindings/interrupt-controller/mips-gic.h> + +#include "eyeq5-fixed-clocks.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "img,i6500"; + reg = <0>; + clocks = <&core0_clk>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* These reserved memory regions are also defined in bootmanager + * for configuring inbound translation for BARS, don't change + * these without syncing with bootmanager + */ + shmem0_reserved: shmem@804000000 { + reg = <0x8 0x04000000 0x0 0x1000000>; + }; + shmem1_reserved: shmem@805000000 { + reg = <0x8 0x05000000 0x0 0x1000000>; + }; + pci0_msi_reserved: pci0-msi@806000000 { + reg = <0x8 0x06000000 0x0 0x100000>; + }; + pci1_msi_reserved: pci1-msi@806100000 { + reg = <0x8 0x06100000 0x0 0x100000>; + }; + + mini_coredump0_reserved: mini-coredump0@806200000 { + reg = <0x8 0x06200000 0x0 0x100000>; + }; + mhm_reserved_0: the-mhm-reserved-0@0 { + reg = <0x8 0x00000000 0x0 0x0000800>; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpu_intc: interrupt-controller { + compatible = "mti,cpu-interrupt-controller"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + soc: soc { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "simple-bus"; + + uart0: serial@800000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x800000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&occ_periph>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart1: serial@900000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x900000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&occ_periph>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart2: serial@a00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0xa00000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&occ_periph>; + clock-names = "uartclk", "apb_pclk"; + }; + + gic: interrupt-controller@140000 { + compatible = "mti,gic"; + reg = <0x0 0x140000 0x0 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + + /* + * Declare the interrupt-parent even though the mti,gic + * binding doesn't require it, such that the kernel can + * figure out that cpu_intc is the root interrupt + * controller & should be probed first. + */ + interrupt-parent = <&cpu_intc>; + + timer { + compatible = "mti,gic-timer"; + interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; + clocks = <&core0_clk>; + }; + }; + }; +}; diff --git a/dts/src/mips/mscc/jaguar2_pcb110.dts b/dts/src/mips/mscc/jaguar2_pcb110.dts index d80cd6842b..1813f4e32e 100644 --- a/dts/src/mips/mscc/jaguar2_pcb110.dts +++ b/dts/src/mips/mscc/jaguar2_pcb110.dts @@ -180,27 +180,27 @@ pins = "GPIO_49"; function = "si"; }; - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_21"; function = "twi_scl_m"; output-high; @@ -208,7 +208,7 @@ }; &i2c0 { - pca9545@70 { + i2c-mux@70 { compatible = "nxp,pca9545"; reg = <0x70>; #address-cells = <1>; @@ -236,7 +236,7 @@ reg = <3>; }; }; - pca9545@71 { + i2c-mux@71 { compatible = "nxp,pca9545"; reg = <0x71>; #address-cells = <1>; diff --git a/dts/src/mips/mscc/jaguar2_pcb111.dts b/dts/src/mips/mscc/jaguar2_pcb111.dts index 813c5e1601..05d8c6a96d 100644 --- a/dts/src/mips/mscc/jaguar2_pcb111.dts +++ b/dts/src/mips/mscc/jaguar2_pcb111.dts @@ -79,27 +79,27 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_17", "GPIO_18"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_21"; function = "twi_scl_m"; output-high; diff --git a/dts/src/mips/mscc/jaguar2_pcb118.dts b/dts/src/mips/mscc/jaguar2_pcb118.dts index 27c644f2d1..cf2cf591a2 100644 --- a/dts/src/mips/mscc/jaguar2_pcb118.dts +++ b/dts/src/mips/mscc/jaguar2_pcb118.dts @@ -39,17 +39,17 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_17", "GPIO_16"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_16"; function = "twi_scl_m"; output-high; diff --git a/dts/src/mips/mscc/ocelot.dtsi b/dts/src/mips/mscc/ocelot.dtsi index e51db651af..6bd8a1ad94 100644 --- a/dts/src/mips/mscc/ocelot.dtsi +++ b/dts/src/mips/mscc/ocelot.dtsi @@ -136,13 +136,14 @@ <0x1880000 0x10000>, <0x1040000 0x10000>, <0x1050000 0x10000>, - <0x1060000 0x10000>; + <0x1060000 0x10000>, + <0x1a0 0x1c4>; reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", "port2", "port3", "port4", "port5", "port6", "port7", "port8", "port9", "port10", "qsys", - "ana", "s0", "s1", "s2"; - interrupts = <18 21 22>; - interrupt-names = "ptp_rdy", "xtr", "inj"; + "ana", "s0", "s1", "s2", "fdma"; + interrupts = <18 21 22 16>; + interrupt-names = "ptp_rdy", "xtr", "inj", "fdma"; ethernet-ports { #address-cells = <1>; @@ -225,7 +226,7 @@ function = "uart2"; }; - miim1: miim1 { + miim1_pins: miim1-pins { pins = "GPIO_14", "GPIO_15"; function = "miim"; }; @@ -261,7 +262,7 @@ reg = <0x10700c0 0x24>; interrupts = <15>; pinctrl-names = "default"; - pinctrl-0 = <&miim1>; + pinctrl-0 = <&miim1_pins>; status = "disabled"; }; diff --git a/dts/src/mips/mscc/ocelot_pcb120.dts b/dts/src/mips/mscc/ocelot_pcb120.dts index bd240690cb..d348742c23 100644 --- a/dts/src/mips/mscc/ocelot_pcb120.dts +++ b/dts/src/mips/mscc/ocelot_pcb120.dts @@ -22,12 +22,12 @@ }; &gpio { - phy_int_pins: phy_int_pins { + phy_int_pins: phy-int-pins { pins = "GPIO_4"; function = "gpio"; }; - phy_load_save_pins: phy_load_save_pins { + phy_load_save_pins: phy-load-save-pins { pins = "GPIO_10"; function = "ptp2"; }; @@ -40,7 +40,7 @@ &mdio1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>; + pinctrl-0 = <&miim1_pins>, <&phy_int_pins>, <&phy_load_save_pins>; phy7: ethernet-phy@0 { reg = <0>; diff --git a/dts/src/mips/mscc/serval_common.dtsi b/dts/src/mips/mscc/serval_common.dtsi index 5b404836db..5dc1eac49e 100644 --- a/dts/src/mips/mscc/serval_common.dtsi +++ b/dts/src/mips/mscc/serval_common.dtsi @@ -20,7 +20,7 @@ stdout-path = "serial0:115200n8"; }; - i2c0_imux: i2c0-imux{ + i2c0_imux: i2c0-imux { compatible = "i2c-mux-pinctrl"; #address-cells = <1>; #size-cells = <0>; @@ -82,38 +82,38 @@ pins = "GPIO_7"; /* No "default" scl for i2c0 */ function = "twi"; }; - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_11", "GPIO_12", "GPIO_18", "GPIO_19", "GPIO_20", "GPIO_21"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_11"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_12"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_19"; function = "twi_scl_m"; output-high; }; - i2cmux_4: i2cmux-4 { + i2cmux_4: i2cmux-4-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_5: i2cmux-5 { + i2cmux_5: i2cmux-5-pins { pins = "GPIO_21"; function = "twi_scl_m"; output-high; diff --git a/dts/src/mips/pic32/pic32mzda.dtsi b/dts/src/mips/pic32/pic32mzda.dtsi index f1e3dad6be..fdc721b414 100644 --- a/dts/src/mips/pic32/pic32mzda.dtsi +++ b/dts/src/mips/pic32/pic32mzda.dtsi @@ -75,7 +75,7 @@ microchip,external-irqs = <3 8 13 18 23>; }; - pic32_pinctrl: pinctrl@1f801400{ + pic32_pinctrl: pinctrl@1f801400 { #address-cells = <1>; #size-cells = <1>; compatible = "microchip,pic32mzda-pinctrl"; diff --git a/dts/src/mips/pic32/pic32mzda_sk.dts b/dts/src/mips/pic32/pic32mzda_sk.dts index d7fa5d55db..b1c5ffdb33 100644 --- a/dts/src/mips/pic32/pic32mzda_sk.dts +++ b/dts/src/mips/pic32/pic32mzda_sk.dts @@ -28,19 +28,19 @@ pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; - led@1 { + led-1 { label = "pic32mzda_sk:red:led1"; gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - led@2 { + led-2 { label = "pic32mzda_sk:yellow:led2"; gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; - led@3 { + led-3 { label = "pic32mzda_sk:green:led3"; gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -52,22 +52,19 @@ pinctrl-0 = <&user_buttons_s0>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - - button@sw1 { + button-1 { label = "ESC"; linux,code = <1>; gpios = <&gpio1 12 0>; }; - button@sw2 { + button-2 { label = "Home"; linux,code = <102>; gpios = <&gpio1 13 0>; }; - button@sw3 { + button-3 { label = "Menu"; linux,code = <139>; gpios = <&gpio1 14 0>; diff --git a/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts b/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts index 7fccf63572..f894fe1781 100644 --- a/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts +++ b/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts @@ -23,17 +23,15 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; - button@1 { + button-1 { label = "qss"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; @@ -43,23 +41,23 @@ leds { compatible = "gpio-leds"; - led@0 { + led-0 { label = "tp-link:green:usb"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; - led@1 { + led-1 { label = "tp-link:green:system"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - led@2 { + led-2 { label = "tp-link:green:qss"; gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; }; - led@3 { + led-3 { label = "tp-link:green:wlan"; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/mips/qca/ar9331.dtsi b/dts/src/mips/qca/ar9331.dtsi index c4102b280b..768ac0f869 100644 --- a/dts/src/mips/qca/ar9331.dtsi +++ b/dts/src/mips/qca/ar9331.dtsi @@ -176,7 +176,6 @@ switch_port0: port@0 { reg = <0x0>; - label = "cpu"; ethernet = <ð1>; phy-mode = "gmii"; diff --git a/dts/src/mips/qca/ar9331_dpt_module.dts b/dts/src/mips/qca/ar9331_dpt_module.dts index 7695d326df..c857cd22f7 100644 --- a/dts/src/mips/qca/ar9331_dpt_module.dts +++ b/dts/src/mips/qca/ar9331_dpt_module.dts @@ -33,10 +33,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/qca/ar9331_dragino_ms14.dts b/dts/src/mips/qca/ar9331_dragino_ms14.dts index d38aa73f1a..7affa58d4f 100644 --- a/dts/src/mips/qca/ar9331_dragino_ms14.dts +++ b/dts/src/mips/qca/ar9331_dragino_ms14.dts @@ -22,25 +22,25 @@ leds { compatible = "gpio-leds"; - wlan { + led-wlan { label = "dragino2:red:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - lan { + led-lan { label = "dragino2:red:lan"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; default-state = "off"; }; - wan { + led-wan { label = "dragino2:red:wan"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "off"; }; - system { + led-system { label = "dragino2:red:system"; gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -49,16 +49,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "jumpstart"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/qca/ar9331_omega.dts b/dts/src/mips/qca/ar9331_omega.dts index 11778abacf..8904aa917a 100644 --- a/dts/src/mips/qca/ar9331_omega.dts +++ b/dts/src/mips/qca/ar9331_omega.dts @@ -22,7 +22,7 @@ leds { compatible = "gpio-leds"; - system { + led-system { label = "onion:amber:system"; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -31,10 +31,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/qca/ar9331_openembed_som9331_board.dts b/dts/src/mips/qca/ar9331_openembed_som9331_board.dts index e6622f8e8c..dc65ebd60b 100644 --- a/dts/src/mips/qca/ar9331_openembed_som9331_board.dts +++ b/dts/src/mips/qca/ar9331_openembed_som9331_board.dts @@ -33,10 +33,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/qca/ar9331_tl_mr3020.dts b/dts/src/mips/qca/ar9331_tl_mr3020.dts index c8290d36cf..10b9759228 100644 --- a/dts/src/mips/qca/ar9331_tl_mr3020.dts +++ b/dts/src/mips/qca/ar9331_tl_mr3020.dts @@ -22,25 +22,25 @@ leds { compatible = "gpio-leds"; - wlan { + led-wlan { label = "tp-link:green:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - lan { + led-lan { label = "tp-link:green:lan"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "off"; }; - wps { + led-wps { label = "tp-link:green:wps"; gpios = <&gpio 26 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led3g { + led-led3g { label = "tp-link:green:3g"; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -49,22 +49,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; - button@1 { + button-1 { label = "sw1"; linux,code = <BTN_0>; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "sw2"; linux,code = <BTN_1>; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts index 6069b33cf0..18107ca0a0 100644 --- a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts +++ b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts @@ -26,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ - user_btn1 { + button { label = "USER_BTN1"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code =<KEY_PROG1> ; @@ -47,67 +47,67 @@ * (see below). So we can't include it in this LED node. */ - power_blue { + led-power-blue { label = "smartgw:power:blue"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - power_green { + led-power-green { label = "smartgw:power:green"; gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - power_red { + led-power-red { label = "smartgw:power:red"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_blue { + led-radio-blue { label = "smartgw:radio:blue"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_green { + led-radio-green { label = "smartgw:radio:green"; gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_red { + led-radio-red { label = "smartgw:radio:red"; gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_blue { + led-internet-blue { label = "smartgw:internet:blue"; gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_green { + led-internet-green { label = "smartgw:internet:green"; gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_red { + led-internet-red { label = "smartgw:internet:red"; gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - ethernet_link { + led-ethernet-link { label = "smartgw:eth:link"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "netdev"; }; - ethernet_activity { + led-ethernet-activity { label = "smartgw:eth:act"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; linux,default-trigger = "netdev"; @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts new file mode 100644 index 0000000000..f9c262cc2e --- /dev/null +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc"; + model = "GnuBee GB-PC1"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x1c000000>, + <0x20000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-power { + label = "green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-system { + label = "green:system"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; +}; + +&mmc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + broken-flash-reset; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "ethblack"; + }; + + port@4 { + status = "okay"; + label = "ethblue"; + }; + }; +}; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts new file mode 100644 index 0000000000..b281e13f22 --- /dev/null +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc"; + model = "GnuBee GB-PC2"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x1c000000>, + <0x20000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-ethblack-green { + label = "green:ethblack"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + led-ethblue-green { + label = "green:ethblue"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + led-ethyellow-green { + label = "green:ethyellow"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led-ethyellow-orange { + label = "orange:ethyellow"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led-power { + label = "green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-system { + label = "green:system"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; +}; + +&mmc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + broken-flash-reset; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&gmac1 { + phy-mode = "rgmii-rxid"; + phy-handle = <ðphy5>; + + fixed-link { + status = "disabled"; + }; +}; + +&mdio { + ethphy5: ethernet-phy@5 { + reg = <5>; + }; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "ethblack"; + }; + + port@4 { + status = "okay"; + label = "ethblue"; + }; + + port@5 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/mips/ralink/mt7621-tplink-hc220-g5-v1.dts b/dts/src/mips/ralink/mt7621-tplink-hc220-g5-v1.dts new file mode 100644 index 0000000000..2d2eadc6b9 --- /dev/null +++ b/dts/src/mips/ralink/mt7621-tplink-hc220-g5-v1.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "tplink,hc220-g5-v1", "mediatek,mt7621-soc"; + model = "TP-Link HC220 G5 v1"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "earlycon console=ttyS0,115200"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + key-wps { + label = "wps"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-fault { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_FAULT; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + led-power { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wps { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WPS; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan2"; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@2 { + status = "okay"; + label = "wan"; + }; + }; +}; diff --git a/dts/src/mips/ralink/mt7621.dtsi b/dts/src/mips/ralink/mt7621.dtsi new file mode 100644 index 0000000000..6e95e6f19a --- /dev/null +++ b/dts/src/mips/ralink/mt7621.dtsi @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +#include <dt-bindings/interrupt-controller/mips-gic.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/mt7621-clk.h> +#include <dt-bindings/reset/mt7621-reset.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mediatek,mt7621-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips1004Kc"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "mips,mips1004Kc"; + reg = <1>; + }; + }; + + cpuintc: cpuintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + mmc_fixed_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mmc_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + }; + + mmc_fixed_1v8_io: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "mmc_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + }; + + palmbus: palmbus@1e000000 { + compatible = "palmbus"; + reg = <0x1e000000 0x100000>; + ranges = <0x0 0x1e000000 0x0fffff>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc: syscon@0 { + compatible = "mediatek,mt7621-sysc", "syscon"; + reg = <0x0 0x100>; + #clock-cells = <1>; + #reset-cells = <1>; + ralink,memctl = <&memc>; + clock-output-names = "xtal", "cpu", "bus", + "50m", "125m", "150m", + "250m", "270m"; + }; + + wdt: watchdog@100 { + compatible = "mediatek,mt7621-wdt"; + reg = <0x100 0x100>; + mediatek,sysctl = <&sysc>; + }; + + gpio: gpio@600 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "mediatek,mt7621-gpio"; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 95>; + interrupt-controller; + reg = <0x600 0x100>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>; + }; + + i2c: i2c@900 { + compatible = "mediatek,mt7621-i2c"; + reg = <0x900 0x100>; + + clocks = <&sysc MT7621_CLK_I2C>; + clock-names = "i2c"; + resets = <&sysc MT7621_RST_I2C>; + reset-names = "i2c"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + }; + + memc: memory-controller@5000 { + compatible = "mediatek,mt7621-memc", "syscon"; + reg = <0x5000 0x1000>; + }; + + serial0: serial@c00 { + compatible = "ns16550a"; + reg = <0xc00 0x100>; + + reg-io-width = <4>; + reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART1>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>; + + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + }; + + serial1: serial@d00 { + compatible = "ns16550a"; + reg = <0xd00 0x100>; + + reg-io-width = <4>; + reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART2>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>; + + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "disabled"; + }; + + serial2: serial@e00 { + compatible = "ns16550a"; + reg = <0xe00 0x100>; + + reg-io-width = <4>; + reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART3>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>; + + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + status = "disabled"; + }; + + spi0: spi@b00 { + status = "disabled"; + + compatible = "ralink,mt7621-spi"; + reg = <0xb00 0x100>; + + clocks = <&sysc MT7621_CLK_SPI>; + clock-names = "spi"; + + resets = <&sysc MT7621_RST_SPI>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + }; + }; + + pinctrl: pinctrl { + compatible = "ralink,mt7621-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + + spi_pins: spi0-pins { + pinmux { + groups = "spi"; + function = "spi"; + }; + }; + + uart1_pins: uart1-pins { + pinmux { + groups = "uart1"; + function = "uart1"; + }; + }; + + uart2_pins: uart2-pins { + pinmux { + groups = "uart2"; + function = "uart2"; + }; + }; + + uart3_pins: uart3-pins { + pinmux { + groups = "uart3"; + function = "uart3"; + }; + }; + + rgmii1_pins: rgmii1-pins { + pinmux { + groups = "rgmii1"; + function = "rgmii1"; + }; + }; + + rgmii2_pins: rgmii2-pins { + pinmux { + groups = "rgmii2"; + function = "rgmii2"; + }; + }; + + mdio_pins: mdio0-pins { + pinmux { + groups = "mdio"; + function = "mdio"; + }; + }; + + pcie_pins: pcie0-pins { + pinmux { + groups = "pcie"; + function = "gpio"; + }; + }; + + nand_pins: nand0-pins { + spi-pinmux { + groups = "spi"; + function = "nand1"; + }; + + sdhci-pinmux { + groups = "sdhci"; + function = "nand2"; + }; + }; + + sdhci_pins: sdhci0-pins { + pinmux { + groups = "sdhci"; + function = "sdhci"; + }; + }; + }; + + mmc: mmc@1e130000 { + status = "disabled"; + + compatible = "mediatek,mt7620-mmc"; + reg = <0x1e130000 0x4000>; + + bus-width = <4>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&mmc_fixed_3v3>; + vqmmc-supply = <&mmc_fixed_1v8_io>; + disable-wp; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdhci_pins>; + pinctrl-1 = <&sdhci_pins>; + + clocks = <&sysc MT7621_CLK_SHXC>, + <&sysc MT7621_CLK_50M>; + clock-names = "source", "hclk"; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb: usb@1e1c0000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; + reg = <0x1e1c0000 0x1000 + 0x1e1d0700 0x0100>; + reg-names = "mac", "ippc"; + + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&sysc MT7621_CLK_XTAL>; + clock-names = "sys_ck"; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@1fbc0000 { + compatible = "mti,gic"; + reg = <0x1fbc0000 0x2000>; + + interrupt-controller; + #interrupt-cells = <3>; + + mti,reserved-cpu-vectors = <7>; + + timer { + compatible = "mti,gic-timer"; + interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; + clocks = <&sysc MT7621_CLK_CPU>; + }; + }; + + cpc: cpc@1fbf0000 { + compatible = "mti,mips-cpc"; + reg = <0x1fbf0000 0x8000>; + }; + + cdmm: cdmm@1fbf8000 { + compatible = "mti,mips-cdmm"; + reg = <0x1fbf8000 0x8000>; + }; + + ethernet: ethernet@1e100000 { + compatible = "mediatek,mt7621-eth"; + reg = <0x1e100000 0x10000>; + + clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>; + clock-names = "fe", "ethif"; + + #address-cells = <1>; + #size-cells = <0>; + + resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>; + reset-names = "fe", "eth"; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; + + mediatek,ethsys = <&sysc>; + + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + status = "disabled"; + reg = <0>; + label = "swp0"; + }; + + port@1 { + status = "disabled"; + reg = <1>; + label = "swp1"; + }; + + port@2 { + status = "disabled"; + reg = <2>; + label = "swp2"; + }; + + port@3 { + status = "disabled"; + reg = <3>; + label = "swp3"; + }; + + port@4 { + status = "disabled"; + reg = <4>; + label = "swp4"; + }; + + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + }; + + pcie: pcie@1e140000 { + compatible = "mediatek,mt7621-pci"; + reg = <0x1e140000 0x100>, /* host-pci bridge registers */ + <0x1e142000 0x100>, /* pcie port 0 RC control registers */ + <0x1e143000 0x100>, /* pcie port 1 RC control registers */ + <0x1e144000 0x100>; /* pcie port 2 RC control registers */ + #address-cells = <3>; + #size-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + + device_type = "pci"; + + ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */ + <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0xF800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>; + resets = <&sysc MT7621_RST_PCIE0>; + clocks = <&sysc MT7621_CLK_PCIE0>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy0"; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>; + resets = <&sysc MT7621_RST_PCIE1>; + clocks = <&sysc MT7621_CLK_PCIE1>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy1"; + ranges; + }; + + pcie@2,0 { + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + resets = <&sysc MT7621_RST_PCIE2>; + clocks = <&sysc MT7621_CLK_PCIE2>; + phys = <&pcie2_phy 0>; + phy-names = "pcie-phy2"; + ranges; + }; + }; + + pcie0_phy: pcie-phy@1e149000 { + compatible = "mediatek,mt7621-pci-phy"; + reg = <0x1e149000 0x0700>; + clocks = <&sysc MT7621_CLK_XTAL>; + #phy-cells = <1>; + }; + + pcie2_phy: pcie-phy@1e14a000 { + compatible = "mediatek,mt7621-pci-phy"; + reg = <0x1e14a000 0x0700>; + clocks = <&sysc MT7621_CLK_XTAL>; + #phy-cells = <1>; + }; +}; diff --git a/dts/src/mips/ralink/mt7628a.dtsi b/dts/src/mips/ralink/mt7628a.dtsi index 45bf96a3d1..45a15e005c 100644 --- a/dts/src/mips/ralink/mt7628a.dtsi +++ b/dts/src/mips/ralink/mt7628a.dtsi @@ -51,85 +51,85 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x1>; - pinmux_gpio_gpio: pinmux_gpio_gpio { + pinmux_gpio_gpio: gpio-gpio-pins { pinctrl-single,bits = <0x0 0x0 0x3>; }; - pinmux_spi_cs1_cs: pinmux_spi_cs1_cs { + pinmux_spi_cs1_cs: spi-cs1-cs-pins { pinctrl-single,bits = <0x0 0x0 0x30>; }; - pinmux_i2s_gpio: pinmux_i2s_gpio { + pinmux_i2s_gpio: i2s-gpio-pins { pinctrl-single,bits = <0x0 0x40 0xc0>; }; - pinmux_uart0_uart: pinmux_uart0_uart0 { + pinmux_uart0_uart: uart0-uart0-pins { pinctrl-single,bits = <0x0 0x0 0x300>; }; - pinmux_sdmode_sdxc: pinmux_sdmode_sdxc { + pinmux_sdmode_sdxc: sdmode-sdxc-pins { pinctrl-single,bits = <0x0 0x0 0xc00>; }; - pinmux_sdmode_gpio: pinmux_sdmode_gpio { + pinmux_sdmode_gpio: sdmode-gpio-pins { pinctrl-single,bits = <0x0 0x400 0xc00>; }; - pinmux_spi_spi: pinmux_spi_spi { + pinmux_spi_spi: spi-spi-pins { pinctrl-single,bits = <0x0 0x0 0x1000>; }; - pinmux_refclk_gpio: pinmux_refclk_gpio { + pinmux_refclk_gpio: refclk-gpio-pins { pinctrl-single,bits = <0x0 0x40000 0x40000>; }; - pinmux_i2c_i2c: pinmux_i2c_i2c { + pinmux_i2c_i2c: i2c-i2c-pins { pinctrl-single,bits = <0x0 0x0 0x300000>; }; - pinmux_uart1_uart: pinmux_uart1_uart1 { + pinmux_uart1_uart: uart1-uart1-pins { pinctrl-single,bits = <0x0 0x0 0x3000000>; }; - pinmux_uart2_uart: pinmux_uart2_uart { + pinmux_uart2_uart: uart2-uart-pins { pinctrl-single,bits = <0x0 0x0 0xc000000>; }; - pinmux_pwm0_pwm: pinmux_pwm0_pwm { + pinmux_pwm0_pwm: pwm0-pwm-pins { pinctrl-single,bits = <0x0 0x0 0x30000000>; }; - pinmux_pwm0_gpio: pinmux_pwm0_gpio { + pinmux_pwm0_gpio: pwm0-gpio-pins { pinctrl-single,bits = <0x0 0x10000000 0x30000000>; }; - pinmux_pwm1_pwm: pinmux_pwm1_pwm { + pinmux_pwm1_pwm: pwm1-pwm-pins { pinctrl-single,bits = <0x0 0x0 0xc0000000>; }; - pinmux_pwm1_gpio: pinmux_pwm1_gpio { + pinmux_pwm1_gpio: pwm1-gpio-pins { pinctrl-single,bits = <0x0 0x40000000 0xc0000000>; }; - pinmux_p0led_an_gpio: pinmux_p0led_an_gpio { + pinmux_p0led_an_gpio: p0led-an-gpio-pins { pinctrl-single,bits = <0x4 0x4 0xc>; }; - pinmux_p1led_an_gpio: pinmux_p1led_an_gpio { + pinmux_p1led_an_gpio: p1led-an-gpio-pins { pinctrl-single,bits = <0x4 0x10 0x30>; }; - pinmux_p2led_an_gpio: pinmux_p2led_an_gpio { + pinmux_p2led_an_gpio: p2led-an-gpio-pins { pinctrl-single,bits = <0x4 0x40 0xc0>; }; - pinmux_p3led_an_gpio: pinmux_p3led_an_gpio { + pinmux_p3led_an_gpio: p3led-an-gpio-pins { pinctrl-single,bits = <0x4 0x100 0x300>; }; - pinmux_p4led_an_gpio: pinmux_p4led_an_gpio { + pinmux_p4led_an_gpio: p4led-an-gpio-pins { pinctrl-single,bits = <0x4 0x400 0xc00>; }; }; |