diff options
Diffstat (limited to 'dts/src/mips')
96 files changed, 7392 insertions, 1105 deletions
diff --git a/dts/src/mips/brcm/bcm3368-netgear-cvg834g.dts b/dts/src/mips/brcm/bcm3368-netgear-cvg834g.dts index ed6023a917..d702a843c7 100644 --- a/dts/src/mips/brcm/bcm3368-netgear-cvg834g.dts +++ b/dts/src/mips/brcm/bcm3368-netgear-cvg834g.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm3368.dtsi" +#include "bcm3368.dtsi" / { compatible = "netgear,cvg834g", "brcm,bcm3368"; diff --git a/dts/src/mips/brcm/bcm3368.dtsi b/dts/src/mips/brcm/bcm3368.dtsi index 69cbef4723..883ca8bed8 100644 --- a/dts/src/mips/brcm/bcm3368.dtsi +++ b/dts/src/mips/brcm/bcm3368.dtsi @@ -1,4 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 + +#include "dt-bindings/clock/bcm3368-clock.h" + / { #address-cells = <1>; #size-cells = <1>; @@ -59,7 +62,7 @@ periph_cntl: syscon@fff8c008 { compatible = "syscon"; - reg = <0xfff8c000 0x4>; + reg = <0xfff8c008 0x4>; native-endian; }; diff --git a/dts/src/mips/brcm/bcm63268-comtrend-vr-3032u.dts b/dts/src/mips/brcm/bcm63268-comtrend-vr-3032u.dts index 8d010b919d..b511bc7125 100644 --- a/dts/src/mips/brcm/bcm63268-comtrend-vr-3032u.dts +++ b/dts/src/mips/brcm/bcm63268-comtrend-vr-3032u.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm63268.dtsi" +#include "bcm63268.dtsi" / { compatible = "comtrend,vr-3032u", "brcm,bcm63268"; diff --git a/dts/src/mips/brcm/bcm63268.dtsi b/dts/src/mips/brcm/bcm63268.dtsi index beec24145a..7b788757cb 100644 --- a/dts/src/mips/brcm/bcm63268.dtsi +++ b/dts/src/mips/brcm/bcm63268.dtsi @@ -1,4 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 + +#include "dt-bindings/clock/bcm63268-clock.h" +#include "dt-bindings/reset/bcm63268-reset.h" +#include "dt-bindings/soc/bcm63268-pm.h" + / { #address-cells = <1>; #size-cells = <1>; @@ -24,16 +29,29 @@ }; clocks { - periph_clk: periph-clk { + periph_osc: periph-osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + + hsspi_osc: hsspi-osc { + compatible = "fixed-clock"; + + #clock-cells = <0>; + + clock-frequency = <400000000>; + clock-output-names = "hsspi_osc"; }; }; aliases { + nflash = &nflash; serial0 = &uart0; serial1 = &uart1; + spi0 = &lsspi; + spi1 = &hsspi; }; cpu_intc: interrupt-controller { @@ -51,23 +69,28 @@ compatible = "simple-bus"; ranges; - clkctl: clock-controller@10000004 { + periph_clk: clock-controller@10000004 { compatible = "brcm,bcm63268-clocks"; reg = <0x10000004 0x4>; #clock-cells = <1>; }; - periph_cntl: syscon@10000008 { + pll_cntl: syscon@10000008 { compatible = "syscon"; - reg = <0x10000000 0xc>; + reg = <0x10000008 0x4>; native-endian; + + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x1>; + }; }; - reboot: syscon-reboot@10000008 { - compatible = "syscon-reboot"; - regmap = <&periph_cntl>; - offset = <0x0>; - mask = <0x1>; + periph_rst: reset-controller@10000010 { + compatible = "brcm,bcm6345-reset"; + reg = <0x10000010 0x4>; + #reset-cells = <1>; }; periph_intc: interrupt-controller@10000020 { @@ -82,6 +105,29 @@ interrupts = <2>, <3>; }; + timer-mfd@10000080 { + compatible = "brcm,bcm7038-twd", "simple-mfd", "syscon"; + reg = <0x10000080 0x30>; + ranges = <0x0 0x10000080 0x30>; + #address-cells = <1>; + #size-cells = <1>; + + timer@0 { + compatible = "brcm,bcm6345-timer"; + reg = <0x0 0x1c>; + }; + + wdt: watchdog@1c { + compatible = "brcm,bcm7038-wdt"; + reg = <0x1c 0xc>; + + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; + }; + uart0: serial@10000180 { compatible = "brcm,bcm6345-uart"; reg = <0x10000180 0x18>; @@ -89,12 +135,34 @@ interrupt-parent = <&periph_intc>; interrupts = <5>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; }; + nflash: nand@10000200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm6368", + "brcm,brcmnand-v4.0", + "brcm,brcmnand"; + reg = <0x10000200 0x180>, + <0x10000600 0x200>, + <0x100000b0 0x10>; + reg-names = "nand", + "nand-cache", + "nand-int-base"; + + interrupt-parent = <&periph_intc>; + interrupts = <50>; + + clocks = <&periph_clk BCM63268_CLK_NAND>; + clock-names = "nand"; + + status = "disabled"; + }; + uart1: serial@100001a0 { compatible = "brcm,bcm6345-uart"; reg = <0x100001a0 0x18>; @@ -102,12 +170,54 @@ interrupt-parent = <&periph_intc>; interrupts = <34>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; }; + lsspi: spi@10000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6358-spi"; + reg = <0x10000800 0x70c>; + + interrupt-parent = <&periph_intc>; + interrupts = <80>; + + clocks = <&periph_clk BCM63268_CLK_SPI>; + clock-names = "spi"; + + resets = <&periph_rst BCM63268_RST_SPI>; + + status = "disabled"; + }; + + hsspi: spi@10001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x10001000 0x600>; + + interrupt-parent = <&periph_intc>; + interrupts = <6>; + + clocks = <&periph_clk BCM63268_CLK_HSSPI>, + <&hsspi_osc>; + clock-names = "hsspi", + "pll"; + + resets = <&periph_rst BCM63268_RST_SPI>; + + status = "disabled"; + }; + + periph_pwr: power-controller@1000184c { + compatible = "brcm,bcm6328-power-controller"; + reg = <0x1000184c 0x4>; + #power-domain-cells = <1>; + }; + leds0: led-controller@10001900 { #address-cells = <1>; #size-cells = <0>; @@ -125,6 +235,9 @@ interrupt-parent = <&periph_intc>; interrupts = <10>; + phys = <&usbh 0>; + phy-names = "usb"; + status = "disabled"; }; @@ -137,6 +250,25 @@ interrupt-parent = <&periph_intc>; interrupts = <9>; + phys = <&usbh 0>; + phy-names = "usb"; + + status = "disabled"; + }; + + usbh: usb-phy@10002700 { + compatible = "brcm,bcm63268-usbh-phy"; + reg = <0x10002700 0x38>; + #phy-cells = <1>; + + clocks = <&periph_clk BCM63268_CLK_USBH>; + clock-names = "usbh"; + + power-domains = <&periph_pwr BCM63268_POWER_DOMAIN_USBH>; + + resets = <&periph_rst BCM63268_RST_USBH>; + reset-names = "usbh"; + status = "disabled"; }; }; diff --git a/dts/src/mips/brcm/bcm6328.dtsi b/dts/src/mips/brcm/bcm6328.dtsi index af860d06de..634618d437 100644 --- a/dts/src/mips/brcm/bcm6328.dtsi +++ b/dts/src/mips/brcm/bcm6328.dtsi @@ -1,4 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 + +#include "dt-bindings/clock/bcm6328-clock.h" +#include "dt-bindings/reset/bcm6328-reset.h" +#include "dt-bindings/soc/bcm6328-pm.h" + / { #address-cells = <1>; #size-cells = <1>; @@ -24,16 +29,26 @@ }; clocks { - periph_clk: periph-clk { + periph_osc: periph-osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + + hsspi_osc: hsspi-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133333333>; + clock-output-names = "hsspi_osc"; }; }; aliases { + nflash = &nflash; serial0 = &uart0; serial1 = &uart1; + spi1 = &hsspi; }; cpu_intc: interrupt-controller { @@ -51,12 +66,18 @@ compatible = "simple-bus"; ranges; - clkctl: clock-controller@10000004 { + periph_clk: clock-controller@10000004 { compatible = "brcm,bcm6328-clocks"; reg = <0x10000004 0x4>; #clock-cells = <1>; }; + periph_rst: reset-controller@10000010 { + compatible = "brcm,bcm6345-reset"; + reg = <0x10000010 0x4>; + #reset-cells = <1>; + }; + periph_intc: interrupt-controller@10000020 { compatible = "brcm,bcm6345-l1-intc"; reg = <0x10000020 0x10>, @@ -69,37 +90,71 @@ interrupts = <2>, <3>; }; + wdt: watchdog@1000005c { + compatible = "brcm,bcm7038-wdt"; + reg = <0x1000005c 0xc>; + + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; + + soft_reset: syscon@10000068 { + compatible = "syscon"; + reg = <0x10000068 0x4>; + native-endian; + + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x1>; + }; + }; + uart0: serial@10000100 { compatible = "brcm,bcm6345-uart"; reg = <0x10000100 0x18>; + interrupt-parent = <&periph_intc>; interrupts = <28>; - clocks = <&periph_clk>; + + clocks = <&periph_osc>; clock-names = "refclk"; + status = "disabled"; }; uart1: serial@10000120 { compatible = "brcm,bcm6345-uart"; reg = <0x10000120 0x18>; + interrupt-parent = <&periph_intc>; interrupts = <39>; - clocks = <&periph_clk>; + + clocks = <&periph_osc>; clock-names = "refclk"; + status = "disabled"; }; - timer: syscon@10000040 { - compatible = "syscon"; - reg = <0x10000040 0x2c>; - native-endian; - }; + nflash: nand@10000200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm6368", + "brcm,brcmnand-v2.2", + "brcm,brcmnand"; + reg = <0x10000200 0x180>, + <0x10000400 0x200>, + <0x10000070 0x10>; + reg-names = "nand", + "nand-cache", + "nand-int-base"; - reboot: syscon-reboot@10000068 { - compatible = "syscon-reboot"; - regmap = <&timer>; - offset = <0x28>; - mask = <0x1>; + interrupt-parent = <&periph_intc>; + interrupts = <0>; + + status = "disabled"; }; leds0: led-controller@10000800 { @@ -107,15 +162,47 @@ #size-cells = <0>; compatible = "brcm,bcm6328-leds"; reg = <0x10000800 0x24>; + status = "disabled"; }; + hsspi: spi@10001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x10001000 0x600>; + + interrupt-parent = <&periph_intc>; + interrupts = <29>; + + clocks = <&periph_clk BCM6328_CLK_HSSPI>, + <&hsspi_osc>; + clock-names = "hsspi", + "pll"; + + resets = <&periph_rst BCM6328_RST_SPI>; + reset-names = "hsspi"; + + status = "disabled"; + }; + + periph_pwr: power-controller@10001848 { + compatible = "brcm,bcm6328-power-controller"; + reg = <0x10001848 0x4>; + #power-domain-cells = <1>; + }; + ehci: usb@10002500 { compatible = "brcm,bcm6328-ehci", "generic-ehci"; reg = <0x10002500 0x100>; big-endian; + interrupt-parent = <&periph_intc>; interrupts = <42>; + + phys = <&usbh 0>; + phy-names = "usb"; + status = "disabled"; }; @@ -124,8 +211,29 @@ reg = <0x10002600 0x100>; big-endian; no-big-frame-no; + interrupt-parent = <&periph_intc>; interrupts = <41>; + + phys = <&usbh 0>; + phy-names = "usb"; + + status = "disabled"; + }; + + usbh: usb-phy@10002700 { + compatible = "brcm,bcm6328-usbh-phy"; + reg = <0x10002700 0x38>; + #phy-cells = <1>; + + clocks = <&periph_clk BCM6328_CLK_USBH>; + clock-names = "usbh"; + + power-domains = <&periph_pwr BCM6328_POWER_DOMAIN_USBH>; + + resets = <&periph_rst BCM6328_RST_USBH>; + reset-names = "usbh"; + status = "disabled"; }; }; diff --git a/dts/src/mips/brcm/bcm6358-neufbox4-sercomm.dts b/dts/src/mips/brcm/bcm6358-neufbox4-sercomm.dts index 53e57cc292..c646690ee3 100644 --- a/dts/src/mips/brcm/bcm6358-neufbox4-sercomm.dts +++ b/dts/src/mips/brcm/bcm6358-neufbox4-sercomm.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm6358.dtsi" +#include "bcm6358.dtsi" / { compatible = "sfr,nb4-ser", "brcm,bcm6358"; diff --git a/dts/src/mips/brcm/bcm6358.dtsi b/dts/src/mips/brcm/bcm6358.dtsi index f21176cac0..777c4379ed 100644 --- a/dts/src/mips/brcm/bcm6358.dtsi +++ b/dts/src/mips/brcm/bcm6358.dtsi @@ -1,4 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 + +#include "dt-bindings/clock/bcm6358-clock.h" +#include "dt-bindings/reset/bcm6358-reset.h" + / { #address-cells = <1>; #size-cells = <1>; @@ -24,16 +28,19 @@ }; clocks { - periph_clk: periph-clk { + periph_osc: periph-osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "periph"; }; }; aliases { + pflash = &pflash; serial0 = &uart0; serial1 = &uart1; + spi0 = &lsspi; }; cpu_intc: interrupt-controller { @@ -51,23 +58,22 @@ compatible = "simple-bus"; ranges; - clkctl: clock-controller@fffe0004 { + periph_clk: clock-controller@fffe0004 { compatible = "brcm,bcm6358-clocks"; reg = <0xfffe0004 0x4>; #clock-cells = <1>; }; - periph_cntl: syscon@fffe0008 { + pll_cntl: syscon@fffe0008 { compatible = "syscon"; - reg = <0xfffe0000 0x4>; + reg = <0xfffe0008 0x4>; native-endian; - }; - reboot: syscon-reboot@fffe0008 { - compatible = "syscon-reboot"; - regmap = <&periph_cntl>; - offset = <0x0>; - mask = <0x1>; + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x1>; + }; }; periph_intc: interrupt-controller@fffe000c { @@ -82,6 +88,22 @@ interrupts = <2>, <3>; }; + periph_rst: reset-controller@fffe0034 { + compatible = "brcm,bcm6345-reset"; + reg = <0xfffe0034 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@fffe005c { + compatible = "brcm,bcm7038-wdt"; + reg = <0xfffe005c 0xc>; + + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; + leds0: led-controller@fffe00d0 { #address-cells = <1>; #size-cells = <0>; @@ -98,7 +120,7 @@ interrupt-parent = <&periph_intc>; interrupts = <2>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; @@ -111,18 +133,41 @@ interrupt-parent = <&periph_intc>; interrupts = <3>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; }; + lsspi: spi@fffe0800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6358-spi"; + reg = <0xfffe0800 0x70c>; + + interrupt-parent = <&periph_intc>; + interrupts = <1>; + + clocks = <&periph_clk BCM6358_CLK_SPI>; + clock-names = "spi"; + + resets = <&periph_rst BCM6358_RST_SPI>; + reset-names = "spi"; + + status = "disabled"; + }; + ehci: usb@fffe1300 { compatible = "brcm,bcm6358-ehci", "generic-ehci"; reg = <0xfffe1300 0x100>; big-endian; + interrupt-parent = <&periph_intc>; interrupts = <10>; + + phys = <&usbh 0>; + phy-names = "usb"; + status = "disabled"; }; @@ -131,9 +176,35 @@ reg = <0xfffe1400 0x100>; big-endian; no-big-frame-no; + interrupt-parent = <&periph_intc>; interrupts = <5>; + + phys = <&usbh 0>; + phy-names = "usb"; + + status = "disabled"; + }; + + usbh: usb-phy@fffe1500 { + compatible = "brcm,bcm6358-usbh-phy"; + reg = <0xfffe1500 0x38>; + #phy-cells = <1>; + + resets = <&periph_rst BCM6358_RST_USBH>; + reset-names = "usbh"; + status = "disabled"; }; }; + + pflash: nor@1e000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x1e000000 0x2000000>; + bank-width = <2>; + + status = "disabled"; + }; }; diff --git a/dts/src/mips/brcm/bcm6362-neufbox6-sercomm.dts b/dts/src/mips/brcm/bcm6362-neufbox6-sercomm.dts index 3e83bee5b9..f83d95ca05 100644 --- a/dts/src/mips/brcm/bcm6362-neufbox6-sercomm.dts +++ b/dts/src/mips/brcm/bcm6362-neufbox6-sercomm.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm6362.dtsi" +#include "bcm6362.dtsi" / { compatible = "sfr,nb6-ser", "brcm,bcm6362"; diff --git a/dts/src/mips/brcm/bcm6362.dtsi b/dts/src/mips/brcm/bcm6362.dtsi index 8ae6981735..d74021925c 100644 --- a/dts/src/mips/brcm/bcm6362.dtsi +++ b/dts/src/mips/brcm/bcm6362.dtsi @@ -1,4 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 + +#include "dt-bindings/clock/bcm6362-clock.h" +#include "dt-bindings/reset/bcm6362-reset.h" +#include "dt-bindings/soc/bcm6362-pm.h" + / { #address-cells = <1>; #size-cells = <1>; @@ -24,16 +29,29 @@ }; clocks { - periph_clk: periph-clk { + periph_osc: periph-osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + + hsspi_osc: hsspi-osc { + compatible = "fixed-clock"; + + #clock-cells = <0>; + + clock-frequency = <400000000>; + clock-output-names = "hsspi_osc"; }; }; aliases { + nflash = &nflash; serial0 = &uart0; serial1 = &uart1; + spi0 = &lsspi; + spi1 = &hsspi; }; cpu_intc: interrupt-controller { @@ -51,23 +69,28 @@ compatible = "simple-bus"; ranges; - clkctl: clock-controller@10000004 { + periph_clk: clock-controller@10000004 { compatible = "brcm,bcm6362-clocks"; reg = <0x10000004 0x4>; #clock-cells = <1>; }; - periph_cntl: syscon@10000008 { + pll_cntl: syscon@10000008 { compatible = "syscon"; - reg = <0x10000000 0xc>; + reg = <0x10000008 0x4>; native-endian; + + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x1>; + }; }; - reboot: syscon-reboot@10000008 { - compatible = "syscon-reboot"; - regmap = <&periph_cntl>; - offset = <0x0>; - mask = <0x1>; + periph_rst: reset-controller@10000010 { + compatible = "brcm,bcm6345-reset"; + reg = <0x10000010 0x4>; + #reset-cells = <1>; }; periph_intc: interrupt-controller@10000020 { @@ -82,6 +105,16 @@ interrupts = <2>, <3>; }; + wdt: watchdog@1000005c { + compatible = "brcm,bcm7038-wdt"; + reg = <0x1000005c 0xc>; + + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; + uart0: serial@10000100 { compatible = "brcm,bcm6345-uart"; reg = <0x10000100 0x18>; @@ -89,7 +122,7 @@ interrupt-parent = <&periph_intc>; interrupts = <3>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; @@ -102,12 +135,78 @@ interrupt-parent = <&periph_intc>; interrupts = <4>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; }; + nflash: nand@10000200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm6368", + "brcm,brcmnand-v2.2", + "brcm,brcmnand"; + reg = <0x10000200 0x180>, + <0x10000600 0x200>, + <0x10000070 0x10>; + reg-names = "nand", + "nand-cache", + "nand-int-base"; + + interrupt-parent = <&periph_intc>; + interrupts = <12>; + + clocks = <&periph_clk BCM6362_CLK_NAND>; + clock-names = "nand"; + + status = "disabled"; + }; + + lsspi: spi@10000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6358-spi"; + reg = <0x10000800 0x70c>; + + interrupt-parent = <&periph_intc>; + interrupts = <2>; + + clocks = <&periph_clk BCM6362_CLK_SPI>; + clock-names = "spi"; + + resets = <&periph_rst BCM6362_RST_SPI>; + reset-names = "spi"; + + status = "disabled"; + }; + + hsspi: spi@10001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x10001000 0x600>; + + interrupt-parent = <&periph_intc>; + interrupts = <5>; + + clocks = <&periph_clk BCM6362_CLK_HSSPI>, + <&hsspi_osc>; + clock-names = "hsspi", + "pll"; + + resets = <&periph_rst BCM6362_RST_SPI>; + reset-names = "hsspi"; + + status = "disabled"; + }; + + periph_pwr: power-controller@10001848 { + compatible = "brcm,bcm6362-power-controller"; + reg = <0x10001848 0x4>; + #power-domain-cells = <1>; + }; + leds0: led-controller@10001900 { #address-cells = <1>; #size-cells = <0>; @@ -125,6 +224,9 @@ interrupt-parent = <&periph_intc>; interrupts = <10>; + phys = <&usbh 0>; + phy-names = "usb"; + status = "disabled"; }; @@ -137,6 +239,26 @@ interrupt-parent = <&periph_intc>; interrupts = <9>; + phys = <&usbh 0>; + phy-names = "usb"; + + status = "disabled"; + }; + + usbh: usb-phy@10002700 { + compatible = "brcm,bcm6362-usbh-phy"; + reg = <0x10002700 0x38>; + + #phy-cells = <1>; + + clocks = <&periph_clk BCM6362_CLK_USBH>; + clock-names = "usbh"; + + power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_USBH>; + + resets = <&periph_rst BCM6362_RST_USBH>; + reset-names = "usbh"; + status = "disabled"; }; }; diff --git a/dts/src/mips/brcm/bcm6368.dtsi b/dts/src/mips/brcm/bcm6368.dtsi index 449c167dd8..fc15e20087 100644 --- a/dts/src/mips/brcm/bcm6368.dtsi +++ b/dts/src/mips/brcm/bcm6368.dtsi @@ -1,4 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 + +#include "dt-bindings/clock/bcm6368-clock.h" +#include "dt-bindings/reset/bcm6368-reset.h" + / { #address-cells = <1>; #size-cells = <1>; @@ -24,16 +28,20 @@ }; clocks { - periph_clk: periph-clk { + periph_osc: periph-osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "periph"; }; }; aliases { + nflash = &nflash; + pflash = &pflash; serial0 = &uart0; serial1 = &uart1; + spi0 = &lsspi; }; cpu_intc: interrupt-controller { @@ -51,23 +59,28 @@ compatible = "simple-bus"; ranges; - clkctl: clock-controller@10000004 { + periph_clk: clock-controller@10000004 { compatible = "brcm,bcm6368-clocks"; reg = <0x10000004 0x4>; #clock-cells = <1>; }; - periph_cntl: syscon@100000008 { + pll_cntl: syscon@100000008 { compatible = "syscon"; - reg = <0x10000000 0xc>; + reg = <0x10000008 0x4>; native-endian; + + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x1>; + }; }; - reboot: syscon-reboot@10000008 { - compatible = "syscon-reboot"; - regmap = <&periph_cntl>; - offset = <0x0>; - mask = <0x1>; + periph_rst: reset-controller@10000010 { + compatible = "brcm,bcm6345-reset"; + reg = <0x10000010 0x4>; + #reset-cells = <1>; }; periph_intc: interrupt-controller@10000020 { @@ -82,31 +95,88 @@ interrupts = <2>, <3>; }; + wdt: watchdog@1000005c { + compatible = "brcm,bcm7038-wdt"; + reg = <0x1000005c 0xc>; + + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; + leds0: led-controller@100000d0 { #address-cells = <1>; #size-cells = <0>; compatible = "brcm,bcm6358-leds"; reg = <0x100000d0 0x8>; + status = "disabled"; }; uart0: serial@10000100 { compatible = "brcm,bcm6345-uart"; reg = <0x10000100 0x18>; + interrupt-parent = <&periph_intc>; interrupts = <2>; - clocks = <&periph_clk>; + + clocks = <&periph_osc>; clock-names = "refclk"; + status = "disabled"; }; uart1: serial@10000120 { compatible = "brcm,bcm6345-uart"; reg = <0x10000120 0x18>; + interrupt-parent = <&periph_intc>; interrupts = <3>; - clocks = <&periph_clk>; + + clocks = <&periph_osc>; clock-names = "refclk"; + + status = "disabled"; + }; + + nflash: nand@10000200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm6368", + "brcm,brcmnand-v2.1", + "brcm,brcmnand"; + reg = <0x10000200 0x180>, + <0x10000600 0x200>, + <0x10000070 0x10>; + reg-names = "nand", + "nand-cache", + "nand-int-base"; + + interrupt-parent = <&periph_intc>; + interrupts = <10>; + + clocks = <&periph_clk BCM6368_CLK_NAND>; + clock-names = "nand"; + + status = "disabled"; + }; + + lsspi: spi@10000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6358-spi"; + reg = <0x10000800 0x70c>; + + interrupt-parent = <&periph_intc>; + interrupts = <1>; + + clocks = <&periph_clk BCM6368_CLK_SPI>; + clock-names = "spi"; + + resets = <&periph_rst BCM6368_RST_SPI>; + reset-names = "spi"; + status = "disabled"; }; @@ -114,8 +184,13 @@ compatible = "brcm,bcm6368-ehci", "generic-ehci"; reg = <0x10001500 0x100>; big-endian; + interrupt-parent = <&periph_intc>; interrupts = <7>; + + phys = <&usbh 0>; + phy-names = "usb"; + status = "disabled"; }; @@ -124,9 +199,49 @@ reg = <0x10001600 0x100>; big-endian; no-big-frame-no; + interrupt-parent = <&periph_intc>; interrupts = <5>; + + phys = <&usbh 0>; + phy-names = "usb"; + status = "disabled"; }; + + usbh: usb-phy@10001700 { + compatible = "brcm,bcm6368-usbh-phy"; + reg = <0x10001700 0x38>; + #phy-cells = <1>; + + clocks = <&periph_clk BCM6368_CLK_USBH>; + clock-names = "usbh"; + + resets = <&periph_rst BCM6368_RST_USBH>; + reset-names = "usbh"; + + status = "disabled"; + }; + + random: rng@10004180 { + compatible = "brcm,bcm6368-rng"; + reg = <0x10004180 0x14>; + + clocks = <&periph_clk BCM6368_CLK_IPSEC>; + clock-names = "ipsec"; + + resets = <&periph_rst BCM6368_RST_IPSEC>; + reset-names = "ipsec"; + }; + }; + + pflash: nor@18000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x18000000 0x2000000>; + bank-width = <2>; + + status = "disabled"; }; }; diff --git a/dts/src/mips/brcm/bcm7425.dtsi b/dts/src/mips/brcm/bcm7425.dtsi index aa0b2d39c9..62588c53d3 100644 --- a/dts/src/mips/brcm/bcm7425.dtsi +++ b/dts/src/mips/brcm/bcm7425.dtsi @@ -584,4 +584,34 @@ }; }; }; + + pcie_0: pcie@8b20000 { + status = "disabled"; + compatible = "brcm,bcm7425-pcie"; + + ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000 + 0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000 + 0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000 + 0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>; + + reg = <0x10410000 0x19310>; + aspm-no-l0s; + device_type = "pci"; + msi-controller; + msi-parent = <&pcie_0>; + #address-cells = <0x3>; + #size-cells = <0x2>; + bus-range = <0x0 0xff>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + linux,pci-domain = <0x0>; + + interrupt-parent = <&periph_intc>; + interrupts = <37>, <37>; + interrupt-names = "pcie", "msi"; + #interrupt-cells = <0x1>; + interrupt-map = <0 0 0 1 &periph_intc 0x21 + 0 0 0 1 &periph_intc 0x22 + 0 0 0 1 &periph_intc 0x23 + 0 0 0 1 &periph_intc 0x24>; + }; }; diff --git a/dts/src/mips/brcm/bcm7435.dtsi b/dts/src/mips/brcm/bcm7435.dtsi index 8398b7f68b..cfdf9804e1 100644 --- a/dts/src/mips/brcm/bcm7435.dtsi +++ b/dts/src/mips/brcm/bcm7435.dtsi @@ -422,6 +422,7 @@ reg = <0x41c800 0x600>, <0x41d000 0x100>; interrupt-parent = <&hif_l2_intc>; interrupts = <24>, <4>; + interrupt-names = "nand_ctlrdy", "flash_dma_done"; status = "disabled"; }; @@ -599,4 +600,34 @@ }; }; }; + + pcie_0: pcie@8b20000 { + status = "disabled"; + compatible = "brcm,bcm7435-pcie"; + + ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000 + 0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000 + 0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000 + 0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>; + + reg = <0x10410000 0x19310>; + aspm-no-l0s; + device_type = "pci"; + msi-controller; + msi-parent = <&pcie_0>; + #address-cells = <0x3>; + #size-cells = <0x2>; + bus-range = <0x0 0xff>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + linux,pci-domain = <0x0>; + + interrupt-parent = <&periph_intc>; + interrupts = <39>, <39>; + interrupt-names = "pcie", "msi"; + #interrupt-cells = <0x1>; + interrupt-map = <0 0 0 1 &periph_intc 0x23 + 0 0 0 1 &periph_intc 0x24 + 0 0 0 1 &periph_intc 0x25 + 0 0 0 1 &periph_intc 0x26>; + }; }; diff --git a/dts/src/mips/brcm/bcm93384wvg.dts b/dts/src/mips/brcm/bcm93384wvg.dts index 601e4d9293..7d3f181b89 100644 --- a/dts/src/mips/brcm/bcm93384wvg.dts +++ b/dts/src/mips/brcm/bcm93384wvg.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm3384_zephyr.dtsi" +#include "bcm3384_zephyr.dtsi" / { compatible = "brcm,bcm93384wvg", "brcm,bcm3384"; diff --git a/dts/src/mips/brcm/bcm93384wvg_viper.dts b/dts/src/mips/brcm/bcm93384wvg_viper.dts index 938a8e6612..f845faa0d6 100644 --- a/dts/src/mips/brcm/bcm93384wvg_viper.dts +++ b/dts/src/mips/brcm/bcm93384wvg_viper.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm3384_viper.dtsi" +#include "bcm3384_viper.dtsi" / { compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper"; diff --git a/dts/src/mips/brcm/bcm96368mvwg.dts b/dts/src/mips/brcm/bcm96368mvwg.dts index 6d772c394e..f5e9550853 100644 --- a/dts/src/mips/brcm/bcm96368mvwg.dts +++ b/dts/src/mips/brcm/bcm96368mvwg.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm6368.dtsi" +#include "bcm6368.dtsi" / { compatible = "brcm,bcm96368mvwg", "brcm,bcm6368"; diff --git a/dts/src/mips/brcm/bcm97125cbmb.dts b/dts/src/mips/brcm/bcm97125cbmb.dts index 79e9769f7e..bda5f79625 100644 --- a/dts/src/mips/brcm/bcm97125cbmb.dts +++ b/dts/src/mips/brcm/bcm97125cbmb.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7125.dtsi" +#include "bcm7125.dtsi" / { compatible = "brcm,bcm97125cbmb", "brcm,bcm7125"; diff --git a/dts/src/mips/brcm/bcm97346dbsmb.dts b/dts/src/mips/brcm/bcm97346dbsmb.dts index 28370ff77e..9f73735e81 100644 --- a/dts/src/mips/brcm/bcm97346dbsmb.dts +++ b/dts/src/mips/brcm/bcm97346dbsmb.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7346.dtsi" -/include/ "bcm97xxx-nand-cs1-bch24.dtsi" +#include "bcm7346.dtsi" +#include "bcm97xxx-nand-cs1-bch24.dtsi" / { compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346"; diff --git a/dts/src/mips/brcm/bcm97358svmb.dts b/dts/src/mips/brcm/bcm97358svmb.dts index 41c1b510c2..c17fc14d48 100644 --- a/dts/src/mips/brcm/bcm97358svmb.dts +++ b/dts/src/mips/brcm/bcm97358svmb.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7358.dtsi" -/include/ "bcm97xxx-nand-cs1-bch4.dtsi" +#include "bcm7358.dtsi" +#include "bcm97xxx-nand-cs1-bch4.dtsi" / { compatible = "brcm,bcm97358svmb", "brcm,bcm7358"; @@ -78,7 +78,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/brcm/bcm97360svmb.dts b/dts/src/mips/brcm/bcm97360svmb.dts index 9f6c6c9b7e..c9b76f41e7 100644 --- a/dts/src/mips/brcm/bcm97360svmb.dts +++ b/dts/src/mips/brcm/bcm97360svmb.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7360.dtsi" +#include "bcm7360.dtsi" / { compatible = "brcm,bcm97360svmb", "brcm,bcm7360"; @@ -81,7 +81,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/brcm/bcm97362svmb.dts b/dts/src/mips/brcm/bcm97362svmb.dts index df8b755c39..97aeb51b68 100644 --- a/dts/src/mips/brcm/bcm97362svmb.dts +++ b/dts/src/mips/brcm/bcm97362svmb.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7362.dtsi" -/include/ "bcm97xxx-nand-cs1-bch4.dtsi" +#include "bcm7362.dtsi" +#include "bcm97xxx-nand-cs1-bch4.dtsi" / { compatible = "brcm,bcm97362svmb", "brcm,bcm7362"; diff --git a/dts/src/mips/brcm/bcm97420c.dts b/dts/src/mips/brcm/bcm97420c.dts index 086faeaa38..cc70c2dd4d 100644 --- a/dts/src/mips/brcm/bcm97420c.dts +++ b/dts/src/mips/brcm/bcm97420c.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7420.dtsi" +#include "bcm7420.dtsi" / { compatible = "brcm,bcm97420c", "brcm,bcm7420"; diff --git a/dts/src/mips/brcm/bcm97425svmb.dts b/dts/src/mips/brcm/bcm97425svmb.dts index 0ed22217bf..289a57b912 100644 --- a/dts/src/mips/brcm/bcm97425svmb.dts +++ b/dts/src/mips/brcm/bcm97425svmb.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7425.dtsi" -/include/ "bcm97xxx-nand-cs1-bch24.dtsi" +#include "bcm7425.dtsi" +#include "bcm97xxx-nand-cs1-bch24.dtsi" / { compatible = "brcm,bcm97425svmb", "brcm,bcm7425"; @@ -116,7 +116,7 @@ &qspi { status = "okay"; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <40000000>; @@ -152,3 +152,12 @@ &waketimer { status = "okay"; }; + +&pcie_0 { + status = "okay"; + /* 1GB Memc0, 1GB Memc1 */ + brcm,scb-sizes = <0 0x40000000 0 0x40000000>; + dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000 + 0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000 + 0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>; +}; diff --git a/dts/src/mips/brcm/bcm97435svmb.dts b/dts/src/mips/brcm/bcm97435svmb.dts index 2c145a883a..a0cf53e23c 100644 --- a/dts/src/mips/brcm/bcm97435svmb.dts +++ b/dts/src/mips/brcm/bcm97435svmb.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm7435.dtsi" -/include/ "bcm97xxx-nand-cs1-bch24.dtsi" +#include "bcm7435.dtsi" +#include "bcm97xxx-nand-cs1-bch24.dtsi" / { compatible = "brcm,bcm97435svmb", "brcm,bcm7435"; @@ -128,3 +128,12 @@ &waketimer { status = "okay"; }; + +&pcie_0 { + status = "okay"; + /* 1GB Memc0, 1GB Memc1 */ + brcm,scb-sizes = <0 0x40000000 0 0x40000000>; + dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000 + 0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000 + 0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>; +}; diff --git a/dts/src/mips/brcm/bcm9ejtagprb.dts b/dts/src/mips/brcm/bcm9ejtagprb.dts index 8d58c1971b..615d2b9777 100644 --- a/dts/src/mips/brcm/bcm9ejtagprb.dts +++ b/dts/src/mips/brcm/bcm9ejtagprb.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "bcm6328.dtsi" +#include "bcm6328.dtsi" / { compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328"; diff --git a/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts b/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts index 2fdb4baad1..cb460eaf88 100644 --- a/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts +++ b/dts/src/mips/cavium-octeon/dlink_dsr-1000n.dts @@ -20,27 +20,27 @@ leds { compatible = "gpio-leds"; - usb1 { + led-usb1 { label = "usb1"; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; - usb2 { + led-usb2 { label = "usb2"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; - wps { + led-wps { label = "wps"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - wireless1 { + led-wireless1 { label = "5g"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; - wireless2 { + led-wireless2 { label = "2.4g"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts b/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts index e04237281b..c55845fd84 100644 --- a/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts +++ b/dts/src/mips/cavium-octeon/dlink_dsr-500n.dts @@ -21,15 +21,15 @@ leds { compatible = "gpio-leds"; - usb { + led-usb { gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; - wps { + led-wps { gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - wireless { + led-wireless { label = "2.4g"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/mips/img/boston.dts b/dts/src/mips/img/boston.dts index 84328afa3a..72f7605d2e 100644 --- a/dts/src/mips/img/boston.dts +++ b/dts/src/mips/img/boston.dts @@ -125,7 +125,7 @@ #interrupt-cells = <1>; }; - pci2_root@0,0,0 { + pci2_root@0,0 { compatible = "pci10ee,7021"; reg = <0x00000000 0 0 0 0>; diff --git a/dts/src/mips/img/pistachio.dtsi b/dts/src/mips/img/pistachio.dtsi index dc3b7909de..b1db8b8f44 100644 --- a/dts/src/mips/img/pistachio.dtsi +++ b/dts/src/mips/img/pistachio.dtsi @@ -900,6 +900,16 @@ }; }; + cpc: cpc@1bde0000 { + compatible = "mti,mips-cpc"; + reg = <0x1bde0000 0x10000>; + }; + + cdmm: cdmm@1bdf0000 { + compatible = "mti,mips-cdmm"; + reg = <0x1bdf0000 0x10000>; + }; + usb_phy: usb-phy { compatible = "img,pistachio-usb-phy"; clocks = <&clk_core CLK_USB_PHY>; diff --git a/dts/src/mips/img/pistachio_marduk.dts b/dts/src/mips/img/pistachio_marduk.dts index bf69da96dc..a8da2f992b 100644 --- a/dts/src/mips/img/pistachio_marduk.dts +++ b/dts/src/mips/img/pistachio_marduk.dts @@ -46,9 +46,10 @@ regulator-max-microvolt = <1800000>; }; - leds { + led-controller { compatible = "pwm-leds"; - heartbeat { + + led-1 { label = "marduk:red:heartbeat"; pwms = <&pwm 3 300000>; max-brightness = <255>; @@ -58,12 +59,12 @@ keys { compatible = "gpio-keys"; - button@1 { + button-1 { label = "Button 1"; linux,code = <0x101>; /* BTN_1 */ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; }; - button@2 { + button-2 { label = "Button 2"; linux,code = <0x102>; /* BTN_2 */ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts index db0ca250bd..a141a699b7 100644 --- a/dts/src/mips/ingenic/ci20.dts +++ b/dts/src/mips/ingenic/ci20.dts @@ -31,7 +31,7 @@ gpio-keys { compatible = "gpio-keys"; - sw1 { + switch { label = "ci20:sw1"; linux,code = <KEY_F13>; gpios = <&gpd 17 GPIO_ACTIVE_HIGH>; @@ -42,57 +42,154 @@ leds { compatible = "gpio-leds"; - led0 { + led-0 { label = "ci20:red:led0"; gpios = <&gpc 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; - led1 { + led-1 { label = "ci20:red:led1"; gpios = <&gpc 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "nand-disk"; }; - led2 { + led-2 { label = "ci20:red:led2"; gpios = <&gpc 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu1"; }; - led3 { + led-3 { label = "ci20:red:led3"; gpios = <&gpc 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu0"; }; }; - eth0_power: fixedregulator@0 { + eth0_power: fixedregulator-0 { compatible = "regulator-fixed"; + regulator-name = "eth0_power"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpb 25 GPIO_ACTIVE_LOW>; + + gpio = <&gpb 25 0>; enable-active-high; }; + hdmi_out: connector { + compatible = "hdmi-connector"; + label = "HDMI OUT"; + type = "a"; + + ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>; + + port { + hdmi_con: endpoint { + remote-endpoint = <&dw_hdmi_out>; + }; + }; + }; + ir: ir { compatible = "gpio-ir-receiver"; gpios = <&gpe 3 GPIO_ACTIVE_LOW>; }; - wlan0_power: fixedregulator@1 { + bt_power: fixedregulator-1 { + compatible = "regulator-fixed"; + + regulator-name = "bt_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <1400>; + + vin-supply = <&vcc_50>; + + gpio = <&gpb 19 0>; + enable-active-high; + }; + + otg_power: fixedregulator-2 { compatible = "regulator-fixed"; - regulator-name = "wlan0_power"; - gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + + regulator-name = "otg_power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpf 15 0>; enable-active-high; }; + + wifi_power: fixedregulator-4 { + compatible = "regulator-fixed"; + + regulator-name = "wifi_power"; + + /* + * Technically it's 5V, the WiFi chip has its own internal + * regulators; but the MMC/SD subsystem won't accept such a + * value. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <150000>; + + vin-supply = <&bt_power>; + }; + + vcc_33v: fixedregulator-5 { + compatible = "regulator-fixed"; + + regulator-name = "vcc_33v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + + clocks = <&rtc_dev>; + clock-names = "ext_clock"; + }; }; &ext { clock-frequency = <48000000>; }; +&cgu { + /* + * Use the 32.768 kHz oscillator as the parent of the RTC for a higher + * precision. + */ + assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>, + <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>, + <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_MSCMUX>; + assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>, + <&cgu JZ4780_CLK_MPLL>, + <&cgu JZ4780_CLK_SSIPLL>, + <0>, <&cgu JZ4780_CLK_MPLL>; + assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>; +}; + +&tcu { + /* + * 750 kHz for the system timers and clocksource, + * use channel #0 and #1 for the per cpu system timers, + * and use channel #2 for the clocksource. + * + * 3000 kHz for the OST timer to provide a higher + * precision clocksource. + */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_OST>; + assigned-clock-rates = <750000>, <750000>, <750000>, <3000000>; +}; + &mmc0 { status = "okay"; @@ -103,24 +200,33 @@ pinctrl-0 = <&pins_mmc0>; cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_33v>; + vqmmc-supply = <&vcc_33v>; }; &mmc1 { status = "okay"; bus-width = <4>; - max-frequency = <50000000>; + max-frequency = <25000000>; + mmc-pwrseq = <&wifi_pwrseq>; + vmmc-supply = <&wifi_power>; + vqmmc-supply = <&wifi_io>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&pins_mmc1>; - brcmf: wifi@1 { -/* reg = <4>;*/ - compatible = "brcm,bcm4330-fmac"; - vcc-supply = <&wlan0_power>; - device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpd>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; }; }; @@ -147,11 +253,20 @@ bluetooth { compatible = "brcm,bcm4330-bt"; - reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; - vcc-supply = <&wlan0_power>; + + vbat-supply = <&bt_power>; + vddio-supply = <&wifi_io>; + + interrupt-parent = <&gpf>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + + clocks = <&rtc_dev>; + clock-names = "lpo"; + + reset-gpios = <&gpf 8 GPIO_ACTIVE_LOW>; device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_HIGH>; }; }; @@ -180,59 +295,54 @@ act8600: act8600@5a { compatible = "active-semi,act8600"; reg = <0x5a>; - status = "okay"; regulators { - vddcore: SUDCDC1 { - regulator-name = "DCDC_REG1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + vddcore: DCDC1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + vp1-supply = <&vcc_33v>; regulator-always-on; }; - vddmem: SUDCDC2 { - regulator-name = "DCDC_REG2"; + vddmem: DCDC2 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; + vp2-supply = <&vcc_33v>; regulator-always-on; }; - vcc_33: SUDCDC3 { - regulator-name = "DCDC_REG3"; + vcc_33: DCDC3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vp3-supply = <&vcc_33v>; regulator-always-on; }; - vcc_50: SUDCDC4 { - regulator-name = "SUDCDC_REG4"; + vcc_50: SUDCDC_REG4 { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; - vcc_25: LDO_REG5 { - regulator-name = "LDO_REG5"; + vcc_25: LDO5 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; + inl-supply = <&vcc_33v>; regulator-always-on; }; - wifi_io: LDO_REG6 { - regulator-name = "LDO_REG6"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; + wifi_io: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-settling-time-us = <150000>; + inl-supply = <&vcc_33v>; }; - vcc_28: LDO_REG7 { - regulator-name = "LDO_REG7"; + cim_io_28: LDO7 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; + inl-supply = <&vcc_33v>; }; - vcc_15: LDO_REG8 { - regulator-name = "LDO_REG8"; + cim_io_15: LDO8 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - regulator-always-on; + inl-supply = <&vcc_33v>; }; vrtc_18: LDO_REG9 { - regulator-name = "LDO_REG9"; /* Despite the datasheet stating 3.3V * for REG9 and the driver expecting that, * REG9 outputs 1.8V. @@ -246,7 +356,6 @@ regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "LDO_REG10"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -306,7 +415,7 @@ #address-cells = <1>; #size-cells = <0>; - ingenic,bch-controller = <&bch>; + ecc-engine = <&bch>; ingenic,nemc-tAS = <10>; ingenic,nemc-tAH = <5>; @@ -372,8 +481,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pins_nemc_cs6>; - reg = <6 0 1 /* addr */ - 6 2 1>; /* data */ + reg = <6 0 1>, /* addr */ + <6 2 1>; /* data */ ingenic,nemc-tAS = <15>; ingenic,nemc-tAH = <10>; @@ -381,11 +490,14 @@ ingenic,nemc-tAW = <50>; ingenic,nemc-tSTRV = <100>; - reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; vcc-supply = <ð0_power>; interrupt-parent = <&gpe>; - interrupts = <19 4>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + + nvmem-cells = <ð0_addr>; + nvmem-cell-names = "mac-address"; }; }; @@ -393,6 +505,16 @@ status = "okay"; }; +&otg_phy { + status = "okay"; + + vcc-supply = <&otg_power>; +}; + +&otg { + status = "okay"; +}; + &pinctrl { pins_uart0: uart0 { function = "uart0"; @@ -454,6 +576,12 @@ bias-disable; }; + pins_hdmi_ddc: hdmi_ddc { + function = "hdmi-ddc"; + groups = "hdmi-ddc"; + bias-disable; + }; + pins_nemc: nemc { function = "nemc"; groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; @@ -485,8 +613,38 @@ }; }; -&tcu { - /* 3 MHz for the system timer and clocksource */ - assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>; - assigned-clock-rates = <3000000>, <3000000>; +&hdmi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_hdmi_ddc>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dw_hdmi_in: endpoint { + remote-endpoint = <&lcd_out>; + }; + }; + + port@1 { + reg = <1>; + dw_hdmi_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; +}; + +&lcdc0 { + status = "okay"; + + port { + lcd_out: endpoint { + remote-endpoint = <&dw_hdmi_in>; + }; + }; }; diff --git a/dts/src/mips/ingenic/cu1000-neo.dts b/dts/src/mips/ingenic/cu1000-neo.dts index 03abd94acd..c89abf94e7 100644 --- a/dts/src/mips/ingenic/cu1000-neo.dts +++ b/dts/src/mips/ingenic/cu1000-neo.dts @@ -3,12 +3,12 @@ #include "x1000.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/ingenic,tcu.h> +#include <dt-bindings/clock/ingenic,sysost.h> #include <dt-bindings/interrupt-controller/irq.h> / { - compatible = "yna,cu1000-neo", "ingenic,x1000"; - model = "YSH & ATIL General Board CU Neo"; + compatible = "yna,cu1000-neo", "ingenic,x1000e"; + model = "YSH & ATIL General Board CU1000-Neo"; aliases { serial2 = &uart2; @@ -23,20 +23,19 @@ reg = <0x0 0x04000000>; }; + leds { + compatible = "gpio-leds"; + led-0 { + gpios = <&gpb 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&lpoclk>; - clock-names = "ext_clock"; - reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>; post-power-on-delay-ms = <200>; - - lpoclk: ap6212a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; }; }; @@ -44,60 +43,78 @@ clock-frequency = <24000000>; }; -&tcu { +&cgu { + /* + * Use the 32.768 kHz oscillator as the parent of the RTC for a higher + * precision. + */ + assigned-clocks = <&cgu X1000_CLK_RTC>; + assigned-clock-parents = <&cgu X1000_CLK_RTCLK>; +}; + +&ost { /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>; + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; assigned-clock-rates = <1500000>, <1500000>; - - /* Use channel #0 for the system timer channel #2 for the clocksource */ - ingenic,pwm-channels-mask = <0xfa>; }; -&i2c0 { +&uart2 { status = "okay"; - clock-frequency = <400000>; - - pinctrl-names = "default"; - pinctrl-0 = <&pins_i2c0>; - - ads7830@48 { - compatible = "ti,ads7830"; - reg = <0x48>; - }; -}; - -&uart2 { pinctrl-names = "default"; pinctrl-0 = <&pins_uart2>; +}; +&ssi { status = "okay"; -}; -&mac { - phy-mode = "rmii"; - phy-handle = <&lan8720a>; + num-cs = <2>; + cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pins_mac>; + pinctrl-0 = <&pins_ssi>; - snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */ - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ - status = "okay"; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpc>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; }; -&mdio { +&i2c0 { status = "okay"; - lan8720a: ethernet-phy@0 { - compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; - reg = <0>; + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + ads7830: adc@48 { + compatible = "ti,ads7830"; + reg = <0x48>; }; }; &msc0 { + status = "okay"; + bus-width = <8>; max-frequency = <50000000>; @@ -105,26 +122,23 @@ pinctrl-0 = <&pins_msc0>; non-removable; - - status = "okay"; }; &msc1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; bus-width = <4>; max-frequency = <50000000>; pinctrl-names = "default"; pinctrl-0 = <&pins_msc1>; - #address-cells = <1>; - #size-cells = <0>; - non-removable; mmc-pwrseq = <&wlan_pwrseq>; - status = "okay"; - ap6212a: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; @@ -137,25 +151,56 @@ }; }; -&pinctrl { - pins_i2c0: i2c0 { - function = "i2c0"; - groups = "i2c0-data"; - bias-disable; +&mac { + status = "okay"; + + phy-mode = "rmii"; + phy-handle = <&lan8720a>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mac>; + + snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; +}; + +&mdio { + status = "okay"; + + lan8720a: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; + reg = <0>; }; +}; +&otg_phy { + status = "okay"; +}; + +&otg { + status = "okay"; +}; + +&pinctrl { pins_uart2: uart2 { function = "uart2"; groups = "uart2-data-d"; - bias-disable; + bias-pull-up; }; - pins_mac: mac { - function = "mac"; - groups = "mac"; + pins_ssi: ssi { + function = "ssi"; + groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d"; bias-disable; }; + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-pull-up; + }; + pins_msc0: msc0 { function = "mmc0"; groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit"; @@ -167,4 +212,10 @@ groups = "mmc1-1bit", "mmc1-4bit"; bias-disable; }; + + pins_mac: mac { + function = "mac"; + groups = "mac"; + bias-disable; + }; }; diff --git a/dts/src/mips/ingenic/cu1830-neo.dts b/dts/src/mips/ingenic/cu1830-neo.dts new file mode 100644 index 0000000000..3c77849833 --- /dev/null +++ b/dts/src/mips/ingenic/cu1830-neo.dts @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "x1830.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/ingenic,sysost.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "yna,cu1830-neo", "ingenic,x1830"; + model = "YSH & ATIL General Board CU1830-Neo"; + + aliases { + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + gpios = <&gpc 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + + wlan_pwrseq: msc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + + reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + }; +}; + +&exclk { + clock-frequency = <24000000>; +}; + +&cgu { + /* + * Use the 32.768 kHz oscillator as the parent of the RTC for a higher + * precision. + */ + assigned-clocks = <&cgu X1830_CLK_RTC>; + assigned-clock-parents = <&cgu X1830_CLK_RTCLK>; +}; + +&ost { + /* 1500 kHz for the system timer and clocksource */ + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clock-rates = <1500000>, <1500000>; +}; + +&uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart1>; +}; + +&ssi0 { + status = "okay"; + + num-cs = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_ssi0>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpb>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + ads7830: adc@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; +}; + +&dtrng { + status = "okay"; +}; + +&msc0 { + status = "okay"; + + bus-width = <4>; + max-frequency = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_msc0>; + + non-removable; +}; + +&msc1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + max-frequency = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_msc1>; + + non-removable; + + mmc-pwrseq = <&wlan_pwrseq>; + + ap6212a: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpc>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + brcm,drive-strength = <10>; + }; +}; + +&mac { + status = "okay"; + + phy-mode = "rmii"; + phy-handle = <&ip101gr>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mac>; + + snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; +}; + +&mdio { + status = "okay"; + + ip101gr: ethernet-phy@0 { + compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&otg_phy { + status = "okay"; +}; + +&otg { + status = "okay"; +}; + +&pinctrl { + pins_uart1: uart1 { + function = "uart1"; + groups = "uart1-data"; + bias-pull-up; + }; + + pins_ssi0: ssi0 { + function = "ssi0"; + groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1"; + bias-disable; + }; + + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-pull-up; + }; + + pins_msc0: msc0 { + function = "mmc0"; + groups = "mmc0-1bit", "mmc0-4bit"; + bias-disable; + }; + + pins_msc1: msc1 { + function = "mmc1"; + groups = "mmc1-1bit", "mmc1-4bit"; + bias-disable; + }; + + pins_mac: mac { + function = "mac"; + groups = "mac"; + bias-disable; + }; +}; diff --git a/dts/src/mips/ingenic/gcw0.dts b/dts/src/mips/ingenic/gcw0.dts index f58d239c20..5d33f26fd2 100644 --- a/dts/src/mips/ingenic/gcw0.dts +++ b/dts/src/mips/ingenic/gcw0.dts @@ -4,6 +4,10 @@ #include "jz4770.dtsi" #include <dt-bindings/clock/ingenic,tcu.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/adc/ingenic,adc.h> +#include <dt-bindings/input/input.h> + / { compatible = "gcw,zero", "ingenic,jz4770"; model = "GCW Zero"; @@ -15,20 +19,365 @@ serial3 = &uart3; }; + memory: memory { + device_type = "memory"; + reg = <0x0 0x10000000>, + <0x30000000 0x10000000>; + }; + chosen { stdout-path = "serial2:57600n8"; }; - board { - compatible = "simple-bus"; + vcc: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + mmc1_power: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_vcc"; + gpio = <&gpe 9 0>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc>; + }; + + headphones_amp: analog-amplifier@0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>; + enable-delay-ms = <50>; + + VCC-supply = <&ldo5>; + sound-name-prefix = "Headphones Amp"; + }; + + speaker_amp: analog-amplifier@1 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>; + + VCC-supply = <&ldo5>; + sound-name-prefix = "Speaker Amp"; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "gcw0-audio"; + simple-audio-card,format = "i2s"; + + simple-audio-card,widgets = + "Speaker", "Speaker", + "Headphone", "Headphones", + "Microphone", "Built-in Mic"; + simple-audio-card,routing = + "Headphones Amp INL", "LHPOUT", + "Headphones Amp INR", "RHPOUT", + "Headphones", "Headphones Amp OUTL", + "Headphones", "Headphones Amp OUTR", + "Speaker Amp INL", "LOUT", + "Speaker Amp INR", "ROUT", + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "LLINEIN", "Cap-less", + "RLINEIN", "Cap-less", + "Built-in Mic", "MICBIAS", + "MIC1P", "Built-in Mic", + "MIC1N", "Built-in Mic"; + simple-audio-card,pin-switches = "Speaker", "Headphones"; + + simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>; + simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>; + + simple-audio-card,bitclock-master = <&dai_codec>; + simple-audio-card,frame-master = <&dai_codec>; + + dai_cpu: simple-audio-card,cpu { + sound-dai = <&aic>; + }; + + dai_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + rumble { + compatible = "pwm-vibrator"; + pwms = <&pwm 4 2000000 0>; + pwm-names = "enable"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_pwm4>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000 0>; + power-supply = <&vcc>; + + brightness-levels = <0 16 32 48 64 80 96 112 128 + 144 160 176 192 208 224 240 255>; + default-brightness-level = <12>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_pwm1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-0 { + label = "D-pad up"; + linux,code = <KEY_UP>; + linux,can-disable; + gpios = <&gpe 21 GPIO_ACTIVE_LOW>; + }; + + button-1 { + label = "D-pad down"; + linux,code = <KEY_DOWN>; + linux,can-disable; + gpios = <&gpe 25 GPIO_ACTIVE_LOW>; + }; + + button-2 { + label = "D-pad left"; + linux,code = <KEY_LEFT>; + linux,can-disable; + gpios = <&gpe 23 GPIO_ACTIVE_LOW>; + }; + + button-3 { + label = "D-pad right"; + linux,code = <KEY_RIGHT>; + linux,can-disable; + gpios = <&gpe 24 GPIO_ACTIVE_LOW>; + }; + + button-4 { + label = "Button A"; + linux,code = <KEY_LEFTCTRL>; + linux,can-disable; + gpios = <&gpe 29 GPIO_ACTIVE_LOW>; + }; + + button-5 { + label = "Button B"; + linux,code = <KEY_LEFTALT>; + linux,can-disable; + gpios = <&gpe 20 GPIO_ACTIVE_LOW>; + }; + + button-6 { + label = "Button Y"; + linux,code = <KEY_SPACE>; + linux,can-disable; + gpios = <&gpe 27 GPIO_ACTIVE_LOW>; + }; + + button-7 { + label = "Button X"; + linux,code = <KEY_LEFTSHIFT>; + linux,can-disable; + gpios = <&gpe 28 GPIO_ACTIVE_LOW>; + }; + + button-8 { + label = "Left shoulder button"; + linux,code = <KEY_TAB>; + linux,can-disable; + gpios = <&gpb 20 GPIO_ACTIVE_LOW>; + }; + + button-9 { + label = "Right shoulder button"; + linux,code = <KEY_BACKSPACE>; + linux,can-disable; + gpios = <&gpe 26 GPIO_ACTIVE_LOW>; + }; + + button-10 { + label = "Start button"; + linux,code = <KEY_ENTER>; + linux,can-disable; + gpios = <&gpb 21 GPIO_ACTIVE_LOW>; + }; + + button-11 { + label = "Select button"; + linux,code = <KEY_ESC>; + linux,can-disable; + /* + * This is the only button that is active high, + * since it doubles as BOOT_SEL1. + */ + gpios = <&gpd 18 GPIO_ACTIVE_HIGH>; + }; + + button-12 { + label = "Power slider"; + linux,code = <KEY_POWER>; + linux,can-disable; + gpios = <&gpa 30 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-13 { + label = "Power hold"; + linux,code = <KEY_PAUSE>; + linux,can-disable; + gpios = <&gpf 11 GPIO_ACTIVE_LOW>; + }; + }; + + i2c3: i2c-controller@3 { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; /* 250 kHz */ + + act8600: pmic@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + + regulators { + /* USB OTG */ + otg_vbus: SUDCDC_REG4 { + /* + * 5.3V instead of 5.0V to compensate + * for the voltage drop of a diode + * between the regulator and the + * connector. + */ + regulator-min-microvolt = <5300000>; + regulator-max-microvolt = <5300000>; + inl-supply = <&vcc>; + }; + + /* + * When this is off, there is no sound, but also + * no USB networking. + */ + ldo5: LDO5 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + inl-supply = <&vcc>; + }; + + /* LCD panel and FM radio */ + ldo6: LDO6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + inl-supply = <&vcc>; + }; + + /* ??? */ + LDO7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /*regulator-always-on;*/ + inl-supply = <&vcc>; + }; + + /* + * The colors on the LCD are wrong when this is + * off. Which is strange, since the LCD panel + * data sheet only mentions a 3.3V input. + */ + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + /* RTC fixed 3.3V */ + LDO_REG9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + /* Unused fixed 1.2V */ + LDO_REG10 { + inl-supply = <&vcc>; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led { + gpios = <&gpb 30 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + spi { + compatible = "spi-gpio"; #address-cells = <1>; - #size-cells = <1>; - ranges; + #size-cells = <0>; + + sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + nt39016@0 { + compatible = "kingdisplay,kd035g6-54nt"; + reg = <0>; + + spi-max-frequency = <3125000>; + spi-3wire; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; - otg_phy: otg-phy { - compatible = "usb-nop-xceiv"; - clocks = <&cgu JZ4770_CLK_OTG_PHY>; - clock-names = "main_clk"; + backlight = <&backlight>; + power-supply = <&ldo6>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "mini-USB"; + type = "mini"; + + /* + * USB OTG is not yet working reliably, the ID detection + * mechanism tends to fry easily for unknown reasons. + * Until this is fixed, disable OTG by not providing the + * ID GPIO to the driver. + */ + //id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>; + + vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + vbus-supply = <&otg_vbus>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_otg>; + + port { + usb_ep: endpoint { + remote-endpoint = <&usb_otg_ep>; + }; }; }; }; @@ -37,24 +386,86 @@ clock-frequency = <12000000>; }; +&pinctrl { + pins_lcd: lcd { + function = "lcd"; + groups = "lcd-24bit"; + }; + + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data"; + }; + + pins_mmc0: mmc0 { + function = "mmc0"; + groups = "mmc0-1bit-a", "mmc0-4bit-a"; + }; + + pins_mmc1: mmc1 { + function = "mmc1"; + groups = "mmc1-1bit-d", "mmc1-4bit-d"; + }; + + pins_otg: otg { + otg-vbus-pin { + function = "otg"; + groups = "otg-vbus"; + }; + + vbus-pin { + pins = "PB5"; + bias-disable; + }; + }; + + pins_pwm1: pwm1 { + function = "pwm1"; + groups = "pwm1"; + }; + + pins_pwm4: pwm4 { + function = "pwm4"; + groups = "pwm4"; + }; +}; + &uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; + status = "okay"; }; &cgu { - /* Put high-speed peripherals under PLL1, such that we can change the + /* + * Put high-speed peripherals under PLL1, such that we can change the * PLL0 frequency on demand without having to suspend peripherals. * We use a rate of 432 MHz, which is the least common multiple of * 27 MHz (required by TV encoder) and 48 MHz (required by USB host). + * Put the GPU under PLL0 since we want a higher frequency. + * Use the 32 kHz oscillator as the parent of the RTC for a higher + * precision. */ assigned-clocks = <&cgu JZ4770_CLK_PLL1>, - <&cgu JZ4770_CLK_UHC>; + <&cgu JZ4770_CLK_GPU>, + <&cgu JZ4770_CLK_RTC>, + <&cgu JZ4770_CLK_UHC>, + <&cgu JZ4770_CLK_LPCLK_MUX>, + <&cgu JZ4770_CLK_MMC0_MUX>, + <&cgu JZ4770_CLK_MMC1_MUX>; assigned-clock-parents = <0>, + <&cgu JZ4770_CLK_PLL0>, + <&cgu JZ4770_CLK_OSC32K>, + <&cgu JZ4770_CLK_PLL1>, + <&cgu JZ4770_CLK_PLL1>, + <&cgu JZ4770_CLK_PLL1>, <&cgu JZ4770_CLK_PLL1>; assigned-clock-rates = - <432000000>; + <432000000>, + <600000000>; }; &uhc { @@ -63,10 +474,69 @@ }; &tcu { - /* 750 kHz for the system timer and clocksource */ - assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>; - assigned-clock-rates = <750000>, <750000>; + /* + * 750 kHz for the system timer and clocksource, 12 MHz for the OST, + * and use RTC as the parent for the watchdog clock + */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>, + <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>; + assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>; + assigned-clock-rates = <750000>, <750000>, <12000000>; - /* PWM1 is in use, so reserve channel #2 for the clocksource */ + /* PWM1 is in use, so use channel #2 for the clocksource */ ingenic,pwm-channels-mask = <0xfa>; }; + +&usb_otg { + port { + usb_otg_ep: endpoint { + remote-endpoint = <&usb_ep>; + }; + }; +}; + +&otg_phy { + vcc-supply = <&ldo5>; +}; + +&rtc { + clocks = <&cgu JZ4770_CLK_RTC>; + clock-names = "rtc"; + + system-power-controller; +}; + +&mmc0 { + status = "okay"; + + bus-width = <4>; + max-frequency = <48000000>; + vmmc-supply = <&vcc>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc0>; +}; + +&mmc1 { + status = "okay"; + + bus-width = <4>; + max-frequency = <48000000>; + cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>; + vmmc-supply = <&mmc1_power>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc1>; +}; + +&lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pins_lcd>; + + port { + panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; +}; diff --git a/dts/src/mips/ingenic/gcw0_proto.dts b/dts/src/mips/ingenic/gcw0_proto.dts new file mode 100644 index 0000000000..02df22f8ae --- /dev/null +++ b/dts/src/mips/ingenic/gcw0_proto.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "gcw0.dts" + +/ { + model = "GCW Zero Prototype"; +}; + +&memory { + /* Prototype has only 256 MiB of RAM */ + reg = <0x0 0x10000000>; +}; diff --git a/dts/src/mips/ingenic/jz4725b.dtsi b/dts/src/mips/ingenic/jz4725b.dtsi new file mode 100644 index 0000000000..c5c5a094c3 --- /dev/null +++ b/dts/src/mips/ingenic/jz4725b.dtsi @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/ingenic,jz4725b-cgu.h> +#include <dt-bindings/clock/ingenic,tcu.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ingenic,jz4725b"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "ingenic,xburst-mxu1.0"; + reg = <0>; + + clocks = <&cgu JZ4725B_CLK_CCLK>; + clock-names = "cpu"; + }; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: interrupt-controller@10001000 { + compatible = "ingenic,jz4725b-intc", "ingenic,jz4740-intc"; + reg = <0x10001000 0x14>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + ext: ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + osc32k: osc32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + cgu: clock-controller@10000000 { + compatible = "ingenic,jz4725b-cgu"; + reg = <0x10000000 0x100>; + + clocks = <&ext>, <&osc32k>; + clock-names = "ext", "osc32k"; + + #clock-cells = <1>; + }; + + tcu: timer@10002000 { + compatible = "ingenic,jz4725b-tcu", "simple-mfd"; + reg = <0x10002000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10002000 0x1000>; + + #clock-cells = <1>; + + clocks = <&cgu JZ4725B_CLK_RTC>, + <&cgu JZ4725B_CLK_EXT>, + <&cgu JZ4725B_CLK_PCLK>, + <&cgu JZ4725B_CLK_TCU>; + clock-names = "rtc", "ext", "pclk", "tcu"; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&intc>; + interrupts = <23>, <22>, <21>; + + watchdog: watchdog@0 { + compatible = "ingenic,jz4725b-watchdog", "ingenic,jz4740-watchdog"; + reg = <0x0 0xc>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; + + pwm: pwm@60 { + compatible = "ingenic,jz4725b-pwm"; + reg = <0x60 0x40>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>; + clock-names = "timer0", "timer1", "timer2", + "timer3", "timer4", "timer5"; + }; + + ost: timer@e0 { + compatible = "ingenic,jz4725b-ost"; + reg = <0xe0 0x20>; + + clocks = <&tcu TCU_CLK_OST>; + clock-names = "ost"; + + interrupts = <15>; + }; + }; + + rtc_dev: rtc@10003000 { + compatible = "ingenic,jz4725b-rtc", "ingenic,jz4740-rtc"; + reg = <0x10003000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <6>; + + clocks = <&cgu JZ4725B_CLK_RTC>; + clock-names = "rtc"; + }; + + pinctrl: pinctrl@10010000 { + compatible = "ingenic,jz4725b-pinctrl"; + reg = <0x10010000 0x400>; + + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,jz4725b-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <16>; + }; + + gpb: gpio@1 { + compatible = "ingenic,jz4725b-gpio"; + reg = <1>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <15>; + }; + + gpc: gpio@2 { + compatible = "ingenic,jz4725b-gpio"; + reg = <2>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <14>; + }; + + gpd: gpio@3 { + compatible = "ingenic,jz4725b-gpio"; + reg = <3>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <13>; + }; + }; + + aic: audio-controller@10020000 { + compatible = "ingenic,jz4725b-i2s", "ingenic,jz4740-i2s"; + reg = <0x10020000 0x38>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4725B_CLK_AIC>, <&cgu JZ4725B_CLK_I2S>; + clock-names = "aic", "i2s"; + + interrupt-parent = <&intc>; + interrupts = <10>; + + dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>; + dma-names = "rx", "tx"; + }; + + codec: audio-codec@100200a4 { + compatible = "ingenic,jz4725b-codec"; + reg = <0x100200a4 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4725B_CLK_AIC>; + clock-names = "aic"; + }; + + mmc0: mmc@10021000 { + compatible = "ingenic,jz4725b-mmc"; + reg = <0x10021000 0x1000>; + + clocks = <&cgu JZ4725B_CLK_MMC0>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <25>; + + dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + }; + + mmc1: mmc@10022000 { + compatible = "ingenic,jz4725b-mmc"; + reg = <0x10022000 0x1000>; + + clocks = <&cgu JZ4725B_CLK_MMC1>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <24>; + + dmas = <&dmac 31 0xffffffff>, <&dmac 30 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + }; + + uart: serial@10030000 { + compatible = "ingenic,jz4725b-uart", "ingenic,jz4740-uart"; + reg = <0x10030000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <9>; + + clocks = <&ext>, <&cgu JZ4725B_CLK_UART>; + clock-names = "baud", "module"; + }; + + adc: adc@10070000 { + compatible = "ingenic,jz4725b-adc"; + #io-channel-cells = <1>; + + reg = <0x10070000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10070000 0x30>; + + clocks = <&cgu JZ4725B_CLK_ADC>; + clock-names = "adc"; + + interrupt-parent = <&intc>; + interrupts = <18>; + }; + + nemc: memory-controller@13010000 { + compatible = "ingenic,jz4725b-nemc", "ingenic,jz4740-nemc"; + reg = <0x13010000 0x10000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0x18000000 0x4000000>, <2 0 0x14000000 0x4000000>, + <3 0 0x0c000000 0x4000000>, <4 0 0x08000000 0x4000000>; + + clocks = <&cgu JZ4725B_CLK_MCLK>; + }; + + dmac: dma-controller@13020000 { + compatible = "ingenic,jz4725b-dma"; + reg = <0x13020000 0xd8>, <0x13020300 0x14>; + + #dma-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <29>; + + clocks = <&cgu JZ4725B_CLK_DMA>; + }; + + udc: usb@13040000 { + compatible = "ingenic,jz4725b-musb", "ingenic,jz4740-musb"; + reg = <0x13040000 0x10000>; + + interrupt-parent = <&intc>; + interrupts = <27>; + interrupt-names = "mc"; + + clocks = <&cgu JZ4725B_CLK_UDC>; + clock-names = "udc"; + }; + + lcd: lcd-controller@13050000 { + compatible = "ingenic,jz4725b-lcd"; + reg = <0x13050000 0x130>; /* tbc */ + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4725B_CLK_LCD>; + clock-names = "lcd_pclk"; + + lcd_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@8 { + reg = <8>; + + ipu_output: endpoint { + remote-endpoint = <&ipu_input>; + }; + }; + }; + }; + + ipu: ipu@13080000 { + compatible = "ingenic,jz4725b-ipu"; + reg = <0x13080000 0x64>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + clocks = <&cgu JZ4725B_CLK_IPU>; + clock-names = "ipu"; + + port { + ipu_input: endpoint { + remote-endpoint = <&ipu_output>; + }; + }; + }; + + bch: ecc-controller@130d0000 { + compatible = "ingenic,jz4725b-bch"; + reg = <0x130d0000 0x44>; + + clocks = <&cgu JZ4725B_CLK_BCH>; + }; + + rom: memory@1fc00000 { + compatible = "mtd-rom"; + reg = <0x1fc00000 0x2000>; + + bank-width = <4>; + device-width = <1>; + }; +}; diff --git a/dts/src/mips/ingenic/jz4740.dtsi b/dts/src/mips/ingenic/jz4740.dtsi index a3301bab92..bdd6f4d82e 100644 --- a/dts/src/mips/ingenic/jz4740.dtsi +++ b/dts/src/mips/ingenic/jz4740.dtsi @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/clock/jz4740-cgu.h> +#include <dt-bindings/clock/ingenic,jz4740-cgu.h> #include <dt-bindings/clock/ingenic,tcu.h> / { @@ -7,6 +7,20 @@ #size-cells = <1>; compatible = "ingenic,jz4740"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "ingenic,xburst-mxu1.0"; + reg = <0>; + + clocks = <&cgu JZ4740_CLK_CCLK>; + clock-names = "cpu"; + }; + }; + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; @@ -55,10 +69,10 @@ #clock-cells = <1>; - clocks = <&cgu JZ4740_CLK_RTC - &cgu JZ4740_CLK_EXT - &cgu JZ4740_CLK_PCLK - &cgu JZ4740_CLK_TCU>; + clocks = <&cgu JZ4740_CLK_RTC>, + <&cgu JZ4740_CLK_EXT>, + <&cgu JZ4740_CLK_PCLK>, + <&cgu JZ4740_CLK_TCU>; clock-names = "rtc", "ext", "pclk", "tcu"; interrupt-controller; @@ -74,6 +88,20 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; }; rtc_dev: rtc@10003000 { @@ -164,11 +192,8 @@ interrupt-parent = <&intc>; interrupts = <18>; - clocks = <&cgu JZ4740_CLK_AIC>, - <&cgu JZ4740_CLK_I2S>, - <&cgu JZ4740_CLK_EXT>, - <&cgu JZ4740_CLK_PLL_HALF>; - clock-names = "aic", "i2s", "ext", "pll half"; + clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2S>; + clock-names = "aic", "i2s"; dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>; dma-names = "rx", "tx"; @@ -241,10 +266,10 @@ reg = <0x13010000 0x54>; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 0x18000000 0x4000000 - 2 0 0x14000000 0x4000000 - 3 0 0x0c000000 0x4000000 - 4 0 0x08000000 0x4000000>; + ranges = <1 0 0x18000000 0x4000000>, + <2 0 0x14000000 0x4000000>, + <3 0 0x0c000000 0x4000000>, + <4 0 0x08000000 0x4000000>; clocks = <&cgu JZ4740_CLK_MCLK>; }; @@ -258,8 +283,7 @@ dmac: dma-controller@13020000 { compatible = "ingenic,jz4740-dma"; - reg = <0x13020000 0xbc - 0x13020300 0x14>; + reg = <0x13020000 0xbc>, <0x13020300 0x14>; #dma-cells = <2>; interrupt-parent = <&intc>; @@ -268,7 +292,7 @@ clocks = <&cgu JZ4740_CLK_DMA>; }; - uhc: uhc@13030000 { + uhc: usb@13030000 { compatible = "ingenic,jz4740-ohci", "generic-ohci"; reg = <0x13030000 0x1000>; @@ -296,7 +320,7 @@ lcd: lcd-controller@13050000 { compatible = "ingenic,jz4740-lcd"; - reg = <0x13050000 0x1000>; + reg = <0x13050000 0x60>; /* LCDCMD1+4 */ interrupt-parent = <&intc>; interrupts = <30>; diff --git a/dts/src/mips/ingenic/jz4770.dtsi b/dts/src/mips/ingenic/jz4770.dtsi index 0bfb9edff3..504e895e91 100644 --- a/dts/src/mips/ingenic/jz4770.dtsi +++ b/dts/src/mips/ingenic/jz4770.dtsi @@ -1,12 +1,26 @@ // SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/clock/jz4770-cgu.h> +#include <dt-bindings/clock/ingenic,jz4770-cgu.h> +#include <dt-bindings/clock/ingenic,tcu.h> / { #address-cells = <1>; #size-cells = <1>; compatible = "ingenic,jz4770"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "ingenic,xburst-fpu1.0-mxu1.1"; + reg = <0>; + + clocks = <&cgu JZ4770_CLK_CCLK>; + clock-names = "cpu"; + }; + }; + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; @@ -37,13 +51,25 @@ }; cgu: jz4770-cgu@10000000 { - compatible = "ingenic,jz4770-cgu"; + compatible = "ingenic,jz4770-cgu", "simple-mfd"; reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; clocks = <&ext>, <&osc32k>; clock-names = "ext", "osc32k"; #clock-cells = <1>; + + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + #phy-cells = <0>; + }; }; tcu: timer@10002000 { @@ -55,9 +81,9 @@ #clock-cells = <1>; - clocks = <&cgu JZ4770_CLK_RTC - &cgu JZ4770_CLK_EXT - &cgu JZ4770_CLK_PCLK>; + clocks = <&cgu JZ4770_CLK_RTC>, + <&cgu JZ4770_CLK_EXT>, + <&cgu JZ4770_CLK_PCLK>; clock-names = "rtc", "ext", "pclk"; interrupt-controller; @@ -65,6 +91,47 @@ interrupt-parent = <&intc>; interrupts = <27 26 25>; + + watchdog: watchdog@0 { + compatible = "ingenic,jz4770-watchdog", + "ingenic,jz4740-watchdog"; + reg = <0x0 0xc>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; + + pwm: pwm@40 { + compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; + + ost: timer@e0 { + compatible = "ingenic,jz4770-ost"; + reg = <0xe0 0x20>; + + clocks = <&tcu TCU_CLK_OST>; + clock-names = "ost"; + + interrupts = <15>; + }; + }; + + rtc: rtc@10003000 { + compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc"; + reg = <0x10003000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <32>; }; pinctrl: pin-controller@10010000 { @@ -165,6 +232,92 @@ }; }; + aic: audio-controller@10020000 { + compatible = "ingenic,jz4770-i2s"; + reg = <0x10020000 0x94>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>; + clock-names = "aic", "i2s"; + + interrupt-parent = <&intc>; + interrupts = <34>; + + dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>; + dma-names = "rx", "tx"; + }; + + codec: audio-codec@100200a0 { + compatible = "ingenic,jz4770-codec"; + reg = <0x100200a4 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4770_CLK_AIC>; + clock-names = "aic"; + }; + + mmc0: mmc@10021000 { + compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; + reg = <0x10021000 0x1000>; + + clocks = <&cgu JZ4770_CLK_MMC0>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <37>; + + dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + status = "disabled"; + }; + + mmc1: mmc@10022000 { + compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; + reg = <0x10022000 0x1000>; + + clocks = <&cgu JZ4770_CLK_MMC1>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <36>; + + dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + status = "disabled"; + }; + + mmc2: mmc@10023000 { + compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; + reg = <0x10023000 0x1000>; + + clocks = <&cgu JZ4770_CLK_MMC2>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <35>; + + dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + status = "disabled"; + }; + uart0: serial@10030000 { compatible = "ingenic,jz4770-uart"; reg = <0x10030000 0x100>; @@ -217,37 +370,66 @@ status = "disabled"; }; + adc: adc@10070000 { + compatible = "ingenic,jz4770-adc"; + reg = <0x10070000 0x30>; + + #io-channel-cells = <1>; + + clocks = <&cgu JZ4770_CLK_ADC>; + clock-names = "adc"; + + interrupt-parent = <&intc>; + interrupts = <18>; + }; + + gpu: gpu@13040000 { + compatible = "vivante,gc"; + reg = <0x13040000 0x10000>; + + clocks = <&cgu JZ4770_CLK_GPU>, + <&cgu JZ4770_CLK_GPU>, + <&cgu JZ4770_CLK_GPU>; + clock-names = "bus", "core", "shader"; + + interrupt-parent = <&intc>; + interrupts = <6>; + }; + + lcd: lcd-controller@13050000 { + compatible = "ingenic,jz4770-lcd"; + reg = <0x13050000 0x130>; /* tbc */ + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4770_CLK_LPCLK_MUX>; + clock-names = "lcd_pclk"; + }; + dmac0: dma-controller@13420000 { compatible = "ingenic,jz4770-dma"; - reg = <0x13420000 0xC0 - 0x13420300 0x20>; + reg = <0x13420000 0xC0>, <0x13420300 0x20>; - #dma-cells = <1>; + #dma-cells = <2>; clocks = <&cgu JZ4770_CLK_DMA>; interrupt-parent = <&intc>; interrupts = <24>; - - /* Disable dmac0 until we have something that uses it */ - status = "disabled"; }; dmac1: dma-controller@13420100 { compatible = "ingenic,jz4770-dma"; - reg = <0x13420100 0xC0 - 0x13420400 0x20>; + reg = <0x13420100 0xC0>, <0x13420400 0x20>; - #dma-cells = <1>; + #dma-cells = <2>; clocks = <&cgu JZ4770_CLK_DMA>; interrupt-parent = <&intc>; interrupts = <23>; - - /* Disable dmac1 until we have something that uses it */ - status = "disabled"; }; - uhc: uhc@13430000 { + uhc: usb@13430000 { compatible = "generic-ohci"; reg = <0x13430000 0x1000>; @@ -260,4 +442,28 @@ status = "disabled"; }; + + usb_otg: usb@13440000 { + compatible = "ingenic,jz4770-musb"; + reg = <0x13440000 0x10000>; + + clocks = <&cgu JZ4770_CLK_OTG>; + clock-names = "udc"; + + interrupt-parent = <&intc>; + interrupts = <21>; + interrupt-names = "mc"; + + phys = <&otg_phy>; + + usb-role-switch; + }; + + rom: memory@1fc00000 { + compatible = "mtd-rom"; + reg = <0x1fc00000 0x2000>; + + bank-width = <4>; + device-width = <1>; + }; }; diff --git a/dts/src/mips/ingenic/jz4780.dtsi b/dts/src/mips/ingenic/jz4780.dtsi index bb89653d16..18affff85c 100644 --- a/dts/src/mips/ingenic/jz4780.dtsi +++ b/dts/src/mips/ingenic/jz4780.dtsi @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/clock/jz4780-cgu.h> +#include <dt-bindings/clock/ingenic,jz4780-cgu.h> #include <dt-bindings/clock/ingenic,tcu.h> #include <dt-bindings/dma/jz4780-dma.h> @@ -8,6 +8,29 @@ #size-cells = <1>; compatible = "ingenic,jz4780"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "ingenic,xburst-fpu1.0-mxu1.1"; + reg = <0>; + + clocks = <&cgu JZ4780_CLK_CPU>; + clock-names = "cpu"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "ingenic,xburst-fpu1.0-mxu1.1"; + reg = <1>; + + clocks = <&cgu JZ4780_CLK_CORE1>; + clock-names = "cpu"; + }; + }; + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; @@ -38,13 +61,34 @@ }; cgu: jz4780-cgu@10000000 { - compatible = "ingenic,jz4780-cgu"; + compatible = "ingenic,jz4780-cgu", "simple-mfd"; reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; + + #clock-cells = <1>; clocks = <&ext>, <&rtc>; clock-names = "ext", "rtc"; - #clock-cells = <1>; + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4780-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4780_CLK_OTG1>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + rng: rng@d8 { + compatible = "ingenic,jz4780-rng"; + reg = <0xd8 0x8>; + + status = "disabled"; + }; }; tcu: timer@10002000 { @@ -58,9 +102,9 @@ #clock-cells = <1>; - clocks = <&cgu JZ4780_CLK_RTCLK - &cgu JZ4780_CLK_EXCLK - &cgu JZ4780_CLK_PCLK>; + clocks = <&cgu JZ4780_CLK_RTCLK>, + <&cgu JZ4780_CLK_EXCLK>, + <&cgu JZ4780_CLK_PCLK>; clock-names = "rtc", "ext", "pclk"; interrupt-controller; @@ -76,6 +120,30 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; + + ost: timer@e0 { + compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost"; + reg = <0xe0 0x20>; + + clocks = <&tcu TCU_CLK_OST>; + clock-names = "ost"; + + interrupts = <15>; + }; }; rtc_dev: rtc@10003000 { @@ -87,6 +155,8 @@ clocks = <&cgu JZ4780_CLK_RTCLK>; clock-names = "rtc"; + + #clock-cells = <0>; }; pinctrl: pin-controller@10010000 { @@ -187,23 +257,23 @@ }; }; - spi_gpio { - compatible = "spi-gpio"; + spi0: spi@10043000 { + compatible = "ingenic,jz4780-spi"; + reg = <0x10043000 0x1c>; #address-cells = <1>; #size-cells = <0>; - num-chipselects = <2>; - gpio-miso = <&gpe 14 0>; - gpio-sck = <&gpe 15 0>; - gpio-mosi = <&gpe 17 0>; - cs-gpios = <&gpe 16 0 - &gpe 18 0>; + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu JZ4780_CLK_SSI0>; + clock-names = "spi"; - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <1000000>; - }; + dmas = <&dma JZ4780_DMA_SSI0_RX 0xffffffff>, + <&dma JZ4780_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; }; uart0: serial@10030000 { @@ -271,8 +341,27 @@ status = "disabled"; }; + spi1: spi@10044000 { + compatible = "ingenic,jz4780-spi"; + reg = <0x10044000 0x1c>; + #address-cells = <1>; + #size-sells = <0>; + + interrupt-parent = <&intc>; + interrupts = <7>; + + clocks = <&cgu JZ4780_CLK_SSI1>; + clock-names = "spi"; + + dmas = <&dma JZ4780_DMA_SSI1_RX 0xffffffff>, + <&dma JZ4780_DMA_SSI1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c@10050000 { - compatible = "ingenic,jz4780-i2c"; + compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -290,7 +379,7 @@ }; i2c1: i2c@10051000 { - compatible = "ingenic,jz4780-i2c"; + compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x10051000 0x1000>; @@ -307,7 +396,7 @@ }; i2c2: i2c@10052000 { - compatible = "ingenic,jz4780-i2c"; + compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x10052000 0x1000>; @@ -324,7 +413,7 @@ }; i2c3: i2c@10053000 { - compatible = "ingenic,jz4780-i2c"; + compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x10053000 0x1000>; @@ -341,7 +430,7 @@ }; i2c4: i2c@10054000 { - compatible = "ingenic,jz4780-i2c"; + compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x10054000 0x1000>; @@ -357,27 +446,81 @@ status = "disabled"; }; + hdmi: hdmi@10180000 { + compatible = "ingenic,jz4780-dw-hdmi"; + reg = <0x10180000 0x8000>; + reg-io-width = <4>; + + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; + clock-names = "iahb", "isfr"; + + interrupt-parent = <&intc>; + interrupts = <3>; + + status = "disabled"; + }; + + lcdc0: lcdc0@13050000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x13050000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <31>; + + status = "disabled"; + }; + + lcdc1: lcdc1@130a0000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x130a0000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <23>; + + status = "disabled"; + }; + nemc: nemc@13410000 { - compatible = "ingenic,jz4780-nemc"; + compatible = "ingenic,jz4780-nemc", "simple-mfd"; reg = <0x13410000 0x10000>; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 0x1b000000 0x1000000 - 2 0 0x1a000000 0x1000000 - 3 0 0x19000000 0x1000000 - 4 0 0x18000000 0x1000000 - 5 0 0x17000000 0x1000000 - 6 0 0x16000000 0x1000000>; + ranges = <0 0 0x13410000 0x10000>, + <1 0 0x1b000000 0x1000000>, + <2 0 0x1a000000 0x1000000>, + <3 0 0x19000000 0x1000000>, + <4 0 0x18000000 0x1000000>, + <5 0 0x17000000 0x1000000>, + <6 0 0x16000000 0x1000000>; clocks = <&cgu JZ4780_CLK_NEMC>; status = "disabled"; + + efuse: efuse@d0 { + reg = <0 0xd0 0x30>; + compatible = "ingenic,jz4780-efuse"; + + clocks = <&cgu JZ4780_CLK_AHB2>; + + #address-cells = <1>; + #size-cells = <1>; + + eth0_addr: eth-mac-addr@22 { + reg = <0x22 0x6>; + }; + }; }; dma: dma@13420000 { compatible = "ingenic,jz4780-dma"; - reg = <0x13420000 0x400 - 0x13421000 0x40>; + reg = <0x13420000 0x400>, <0x13421000 0x40>; #dma-cells = <2>; interrupt-parent = <&intc>; @@ -434,4 +577,24 @@ status = "disabled"; }; + + otg: usb@13500000 { + compatible = "ingenic,jz4780-otg"; + reg = <0x13500000 0x40000>; + + interrupt-parent = <&intc>; + interrupts = <21>; + + clocks = <&cgu JZ4780_CLK_UHC>; + clock-names = "otg"; + + phys = <&otg_phy>; + phy-names = "usb2-phy"; + + g-rx-fifo-size = <768>; + g-np-tx-fifo-size = <256>; + g-tx-fifo-size = <256 256 256 256 256 256 256 512>; + + status = "disabled"; + }; }; diff --git a/dts/src/mips/ingenic/qi_lb60.dts b/dts/src/mips/ingenic/qi_lb60.dts index 7a371d9c5a..24f987244a 100644 --- a/dts/src/mips/ingenic/qi_lb60.dts +++ b/dts/src/mips/ingenic/qi_lb60.dts @@ -16,12 +16,18 @@ / { compatible = "qi,lb60", "ingenic,jz4740"; + model = "Ben Nanonote"; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; chosen { stdout-path = &uart0; }; - vcc: regulator@0 { + vcc: regulator-0 { compatible = "regulator-fixed"; regulator-name = "vcc"; @@ -30,7 +36,7 @@ regulator-always-on; }; - mmc_power: regulator@1 { + mmc_power: regulator-1 { compatible = "regulator-fixed"; regulator-name = "mmc_vcc"; gpio = <&gpd 2 0>; @@ -39,7 +45,7 @@ regulator-max-microvolt = <3300000>; }; - amp_supply: regulator@2 { + amp_supply: regulator-2 { compatible = "regulator-fixed"; regulator-name = "amp_supply"; gpio = <&gpd 4 0>; @@ -69,7 +75,7 @@ "Speaker", "OUTL", "Speaker", "OUTR", "INL", "LOUT", - "INL", "ROUT"; + "INR", "ROUT"; simple-audio-card,aux-devs = <&>; @@ -103,74 +109,73 @@ debounce-delay-ms = <10>; wakeup-source; - row-gpios = <&gpd 18 0 &gpd 19 0 &gpd 20 0 &gpd 21 0 - &gpd 22 0 &gpd 23 0 &gpd 24 0 &gpd 26 0>; - col-gpios = <&gpc 10 0 &gpc 11 0 &gpc 12 0 &gpc 13 0 - &gpc 14 0 &gpc 15 0 &gpc 16 0 &gpc 17 0>; + row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>, + <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>; + col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>, + <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>; gpio-activelow; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_F1) /* S2 */ - MATRIX_KEY(0, 1, KEY_F2) /* S3 */ - MATRIX_KEY(0, 2, KEY_F3) /* S4 */ - MATRIX_KEY(0, 3, KEY_F4) /* S5 */ - MATRIX_KEY(0, 4, KEY_F5) /* S6 */ - MATRIX_KEY(0, 5, KEY_F6) /* S7 */ - MATRIX_KEY(0, 6, KEY_F7) /* S8 */ - - MATRIX_KEY(1, 0, KEY_Q) /* S10 */ - MATRIX_KEY(1, 1, KEY_W) /* S11 */ - MATRIX_KEY(1, 2, KEY_E) /* S12 */ - MATRIX_KEY(1, 3, KEY_R) /* S13 */ - MATRIX_KEY(1, 4, KEY_T) /* S14 */ - MATRIX_KEY(1, 5, KEY_Y) /* S15 */ - MATRIX_KEY(1, 6, KEY_U) /* S16 */ - MATRIX_KEY(1, 7, KEY_I) /* S17 */ - MATRIX_KEY(2, 0, KEY_A) /* S18 */ - MATRIX_KEY(2, 1, KEY_S) /* S19 */ - MATRIX_KEY(2, 2, KEY_D) /* S20 */ - MATRIX_KEY(2, 3, KEY_F) /* S21 */ - MATRIX_KEY(2, 4, KEY_G) /* S22 */ - MATRIX_KEY(2, 5, KEY_H) /* S23 */ - MATRIX_KEY(2, 6, KEY_J) /* S24 */ - MATRIX_KEY(2, 7, KEY_K) /* S25 */ - MATRIX_KEY(3, 0, KEY_ESC) /* S26 */ - MATRIX_KEY(3, 1, KEY_Z) /* S27 */ - MATRIX_KEY(3, 2, KEY_X) /* S28 */ - MATRIX_KEY(3, 3, KEY_C) /* S29 */ - MATRIX_KEY(3, 4, KEY_V) /* S30 */ - MATRIX_KEY(3, 5, KEY_B) /* S31 */ - MATRIX_KEY(3, 6, KEY_N) /* S32 */ - MATRIX_KEY(3, 7, KEY_M) /* S33 */ - MATRIX_KEY(4, 0, KEY_TAB) /* S34 */ - MATRIX_KEY(4, 1, KEY_CAPSLOCK) /* S35 */ - MATRIX_KEY(4, 2, KEY_BACKSLASH) /* S36 */ - MATRIX_KEY(4, 3, KEY_APOSTROPHE) /* S37 */ - MATRIX_KEY(4, 4, KEY_COMMA) /* S38 */ - MATRIX_KEY(4, 5, KEY_DOT) /* S39 */ - MATRIX_KEY(4, 6, KEY_SLASH) /* S40 */ - MATRIX_KEY(4, 7, KEY_UP) /* S41 */ - MATRIX_KEY(5, 0, KEY_O) /* S42 */ - MATRIX_KEY(5, 1, KEY_L) /* S43 */ - MATRIX_KEY(5, 2, KEY_EQUAL) /* S44 */ - MATRIX_KEY(5, 3, KEY_QI_UPRED) /* S45 */ - MATRIX_KEY(5, 4, KEY_SPACE) /* S46 */ - MATRIX_KEY(5, 5, KEY_QI_QI) /* S47 */ - MATRIX_KEY(5, 6, KEY_RIGHTCTRL) /* S48 */ - MATRIX_KEY(5, 7, KEY_LEFT) /* S49 */ - MATRIX_KEY(6, 0, KEY_F8) /* S50 */ - MATRIX_KEY(6, 1, KEY_P) /* S51 */ - MATRIX_KEY(6, 2, KEY_BACKSPACE)/* S52 */ - MATRIX_KEY(6, 3, KEY_ENTER) /* S53 */ - MATRIX_KEY(6, 4, KEY_QI_VOLUP) /* S54 */ - MATRIX_KEY(6, 5, KEY_QI_VOLDOWN) /* S55 */ - MATRIX_KEY(6, 6, KEY_DOWN) /* S56 */ - MATRIX_KEY(6, 7, KEY_RIGHT) /* S57 */ - - MATRIX_KEY(7, 0, KEY_LEFTSHIFT) /* S58 */ - MATRIX_KEY(7, 1, KEY_LEFTALT) /* S59 */ - MATRIX_KEY(7, 2, KEY_QI_FN) /* S60 */ - >; + linux,keymap = + <MATRIX_KEY(0, 0, KEY_F1)>, /* S2 */ + <MATRIX_KEY(0, 1, KEY_F2)>, /* S3 */ + <MATRIX_KEY(0, 2, KEY_F3)>, /* S4 */ + <MATRIX_KEY(0, 3, KEY_F4)>, /* S5 */ + <MATRIX_KEY(0, 4, KEY_F5)>, /* S6 */ + <MATRIX_KEY(0, 5, KEY_F6)>, /* S7 */ + <MATRIX_KEY(0, 6, KEY_F7)>, /* S8 */ + + <MATRIX_KEY(1, 0, KEY_Q)>, /* S10 */ + <MATRIX_KEY(1, 1, KEY_W)>, /* S11 */ + <MATRIX_KEY(1, 2, KEY_E)>, /* S12 */ + <MATRIX_KEY(1, 3, KEY_R)>, /* S13 */ + <MATRIX_KEY(1, 4, KEY_T)>, /* S14 */ + <MATRIX_KEY(1, 5, KEY_Y)>, /* S15 */ + <MATRIX_KEY(1, 6, KEY_U)>, /* S16 */ + <MATRIX_KEY(1, 7, KEY_I)>, /* S17 */ + <MATRIX_KEY(2, 0, KEY_A)>, /* S18 */ + <MATRIX_KEY(2, 1, KEY_S)>, /* S19 */ + <MATRIX_KEY(2, 2, KEY_D)>, /* S20 */ + <MATRIX_KEY(2, 3, KEY_F)>, /* S21 */ + <MATRIX_KEY(2, 4, KEY_G)>, /* S22 */ + <MATRIX_KEY(2, 5, KEY_H)>, /* S23 */ + <MATRIX_KEY(2, 6, KEY_J)>, /* S24 */ + <MATRIX_KEY(2, 7, KEY_K)>, /* S25 */ + <MATRIX_KEY(3, 0, KEY_ESC)>, /* S26 */ + <MATRIX_KEY(3, 1, KEY_Z)>, /* S27 */ + <MATRIX_KEY(3, 2, KEY_X)>, /* S28 */ + <MATRIX_KEY(3, 3, KEY_C)>, /* S29 */ + <MATRIX_KEY(3, 4, KEY_V)>, /* S30 */ + <MATRIX_KEY(3, 5, KEY_B)>, /* S31 */ + <MATRIX_KEY(3, 6, KEY_N)>, /* S32 */ + <MATRIX_KEY(3, 7, KEY_M)>, /* S33 */ + <MATRIX_KEY(4, 0, KEY_TAB)>, /* S34 */ + <MATRIX_KEY(4, 1, KEY_CAPSLOCK)>, /* S35 */ + <MATRIX_KEY(4, 2, KEY_BACKSLASH)>, /* S36 */ + <MATRIX_KEY(4, 3, KEY_APOSTROPHE)>, /* S37 */ + <MATRIX_KEY(4, 4, KEY_COMMA)>, /* S38 */ + <MATRIX_KEY(4, 5, KEY_DOT)>, /* S39 */ + <MATRIX_KEY(4, 6, KEY_SLASH)>, /* S40 */ + <MATRIX_KEY(4, 7, KEY_UP)>, /* S41 */ + <MATRIX_KEY(5, 0, KEY_O)>, /* S42 */ + <MATRIX_KEY(5, 1, KEY_L)>, /* S43 */ + <MATRIX_KEY(5, 2, KEY_EQUAL)>, /* S44 */ + <MATRIX_KEY(5, 3, KEY_QI_UPRED)>, /* S45 */ + <MATRIX_KEY(5, 4, KEY_SPACE)>, /* S46 */ + <MATRIX_KEY(5, 5, KEY_QI_QI)>, /* S47 */ + <MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>, /* S48 */ + <MATRIX_KEY(5, 7, KEY_LEFT)>, /* S49 */ + <MATRIX_KEY(6, 0, KEY_F8)>, /* S50 */ + <MATRIX_KEY(6, 1, KEY_P)>, /* S51 */ + <MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */ + <MATRIX_KEY(6, 3, KEY_ENTER)>, /* S53 */ + <MATRIX_KEY(6, 4, KEY_QI_VOLUP)>, /* S54 */ + <MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>, /* S55 */ + <MATRIX_KEY(6, 6, KEY_DOWN)>, /* S56 */ + <MATRIX_KEY(6, 7, KEY_RIGHT)>, /* S57 */ + + <MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>, /* S58 */ + <MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */ + <MATRIX_KEY(7, 2, KEY_QI_FN)>; /* S60 */ }; spi { @@ -255,12 +260,12 @@ #address-cells = <1>; #size-cells = <0>; - ingenic,bch-controller = <&ecc>; + ecc-engine = <&ecc>; pinctrl-names = "default"; pinctrl-0 = <&pins_nemc>; - rb-gpios = <&gpc 30 GPIO_ACTIVE_LOW>; + rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>; nand@1 { reg = <1>; @@ -318,7 +323,7 @@ pins_nemc: nemc { function = "nand"; - groups = "nand-cs1"; + groups = "nand-fre-fwe", "nand-cs1"; }; pins_uart0: uart0 { diff --git a/dts/src/mips/ingenic/rs90.dts b/dts/src/mips/ingenic/rs90.dts new file mode 100644 index 0000000000..e8df70dd42 --- /dev/null +++ b/dts/src/mips/ingenic/rs90.dts @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "jz4725b.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/adc/ingenic,adc.h> +#include <dt-bindings/input/linux-event-codes.h> + +/ { + compatible = "ylm,rs90", "ingenic,jz4725b"; + model = "RS-90"; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vmem: video-memory@1f00000 { + compatible = "shared-dma-pool"; + reg = <0x1f00000 0x100000>; + reusable; + }; + }; + + vcc: regulator { + compatible = "regulator-fixed"; + + regulator-name = "vcc"; + regulaor-min-microvolt = <3300000>; + regulaor-max-microvolt = <3300000>; + regulator-always-on; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 40000 0>; + + brightness-levels = <0 16 32 48 64 80 112 144 192 255>; + default-brightness-level = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_pwm3>; + + power-supply = <&vcc>; + }; + + keys@0 { + compatible = "gpio-keys"; + + key-0 { + label = "D-pad up"; + linux,code = <KEY_UP>; + gpios = <&gpc 10 GPIO_ACTIVE_LOW>; + }; + + key-1 { + label = "D-pad down"; + linux,code = <KEY_DOWN>; + gpios = <&gpc 11 GPIO_ACTIVE_LOW>; + }; + + key-2 { + label = "D-pad left"; + linux,code = <KEY_LEFT>; + gpios = <&gpb 31 GPIO_ACTIVE_LOW>; + }; + + key-3 { + label = "D-pad right"; + linux,code = <KEY_RIGHT>; + gpios = <&gpd 21 GPIO_ACTIVE_LOW>; + }; + + key-4 { + label = "Button A"; + linux,code = <KEY_LEFTCTRL>; + gpios = <&gpc 31 GPIO_ACTIVE_LOW>; + }; + + key-5 { + label = "Button B"; + linux,code = <KEY_LEFTALT>; + gpios = <&gpc 30 GPIO_ACTIVE_LOW>; + }; + + key-6 { + label = "Right shoulder button"; + linux,code = <KEY_BACKSPACE>; + gpios = <&gpc 12 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + }; + + key-7 { + label = "Start button"; + linux,code = <KEY_ENTER>; + gpios = <&gpd 17 GPIO_ACTIVE_LOW>; + }; + }; + + keys@1 { + compatible = "adc-keys"; + io-channels = <&adc INGENIC_ADC_AUX>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1400000>; + poll-interval = <30>; + + key@0 { + label = "Left shoulder button"; + linux,code = <KEY_TAB>; + press-threshold-microvolt = <800000>; + }; + + key@1 { + label = "Select button"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1100000>; + }; + }; + + amp: analog-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>; + + VCC-supply = <&vcc>; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rs90-audio"; + simple-audio-card,format = "i2s"; + + simple-audio-card,widgets = + "Speaker", "Speaker", + "Headphone", "Headphones"; + simple-audio-card,routing = + "INL", "LHPOUT", + "INR", "RHPOUT", + "Headphones", "LHPOUT", + "Headphones", "RHPOUT", + "Speaker", "OUTL", + "Speaker", "OUTR"; + simple-audio-card,pin-switches = "Speaker"; + + simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>; + simple-audio-card,aux-devs = <&>; + + simple-audio-card,bitclock-master = <&dai_codec>; + simple-audio-card,frame-master = <&dai_codec>; + + dai_cpu: simple-audio-card,cpu { + sound-dai = <&aic>; + }; + + dai_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + + }; + + usb_phy: usb-phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + + clocks = <&cgu JZ4725B_CLK_UDC_PHY>; + clock-names = "main_clk"; + vcc-supply = <&vcc>; + }; + + panel { + compatible = "sharp,ls020b1dd01d"; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; +}; + +&ext { + clock-frequency = <12000000>; +}; + +&rtc_dev { + system-power-controller; +}; + +&udc { + phys = <&usb_phy>; +}; + +&pinctrl { + pins_mmc1: mmc1 { + function = "mmc1"; + groups = "mmc1-1bit"; + }; + + pins_nemc: nemc { + function = "nand"; + groups = "nand-cs1", "nand-cle-ale", "nand-fre-fwe"; + }; + + pins_pwm3: pwm3 { + function = "pwm3"; + groups = "pwm3"; + bias-disable; + }; + + pins_lcd: lcd { + function = "lcd"; + groups = "lcd-8bit", "lcd-16bit", "lcd-special"; + }; +}; + +&mmc0 { + status = "disabled"; +}; + +&mmc1 { + bus-width = <1>; + max-frequency = <48000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc1>; + + cd-gpios = <&gpc 20 GPIO_ACTIVE_LOW>; +}; + +&uart { + /* + * The pins for RX/TX are used for the right shoulder button and + * backlight PWM. + */ + status = "disabled"; +}; + +&nemc { + nandc: nand-controller@1 { + compatible = "ingenic,jz4725b-nand"; + reg = <1 0 0x4000000>; + + #address-cells = <1>; + #size-cells = <0>; + + ecc-engine = <&bch>; + + ingenic,nemc-tAS = <10>; + ingenic,nemc-tAH = <5>; + ingenic,nemc-tBP = <10>; + ingenic,nemc-tAW = <15>; + ingenic,nemc-tSTRV = <100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + + rb-gpios = <&gpc 27 GPIO_ACTIVE_HIGH>; + + nand@1 { + reg = <1>; + + nand-ecc-step-size = <512>; + nand-ecc-strength = <8>; + nand-ecc-mode = "hw"; + nand-is-boot-medium; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x20000>; + }; + + partition@20000 { + label = "system"; + reg = <0x20000 0x0>; + }; + }; + }; + }; +}; + +&cgu { + /* Use 32kHz oscillator as the parent of the RTC clock */ + assigned-clocks = <&cgu JZ4725B_CLK_RTC>; + assigned-clock-parents = <&cgu JZ4725B_CLK_OSC32K>; +}; + +&tcu { + /* + * 750 kHz for the system timer and clocksource, and use RTC as the + * parent for the watchdog clock. + */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, <&tcu TCU_CLK_WDT>; + assigned-clock-parents = <0>, <0>, <&cgu JZ4725B_CLK_RTC>; + assigned-clock-rates = <750000>, <750000>; +}; + +&lcd { + memory-region = <&vmem>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_lcd>; +}; + +&lcd_ports { + port@0 { + reg = <0>; + + panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; +}; diff --git a/dts/src/mips/ingenic/x1000.dtsi b/dts/src/mips/ingenic/x1000.dtsi index 147f7d5c24..cc264cfff8 100644 --- a/dts/src/mips/ingenic/x1000.dtsi +++ b/dts/src/mips/ingenic/x1000.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/ingenic,tcu.h> -#include <dt-bindings/clock/x1000-cgu.h> +#include <dt-bindings/clock/ingenic,x1000-cgu.h> #include <dt-bindings/dma/x1000-dma.h> / { @@ -8,6 +8,20 @@ #size-cells = <1>; compatible = "ingenic,x1000", "ingenic,x1000e"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "ingenic,xburst-fpu1.0-mxu1.1"; + reg = <0>; + + clocks = <&cgu X1000_CLK_CPU>; + clock-names = "cpu"; + }; + }; + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; @@ -38,19 +52,56 @@ }; cgu: x1000-cgu@10000000 { - compatible = "ingenic,x1000-cgu"; + compatible = "ingenic,x1000-cgu", "simple-mfd"; reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; #clock-cells = <1>; clocks = <&exclk>, <&rtclk>; clock-names = "ext", "rtc"; + + otg_phy: usb-phy@3c { + compatible = "ingenic,x1000-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu X1000_CLK_OTGPHY>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + rng: rng@d8 { + compatible = "ingenic,x1000-rng"; + reg = <0xd8 0x8>; + + status = "disabled"; + }; + + mac_phy_ctrl: mac-phy-ctrl@e8 { + compatible = "syscon"; + reg = <0xe8 0x4>; + }; + }; + + ost: timer@12000000 { + compatible = "ingenic,x1000-ost"; + reg = <0x12000000 0x3c>; + + #clock-cells = <1>; + + clocks = <&cgu X1000_CLK_OST>; + clock-names = "ost"; + + interrupt-parent = <&cpuintc>; + interrupts = <3>; }; tcu: timer@10002000 { - compatible = "ingenic,x1000-tcu", - "ingenic,jz4770-tcu", - "simple-mfd"; + compatible = "ingenic,x1000-tcu", "simple-mfd"; reg = <0x10002000 0x1000>; #address-cells = <1>; #size-cells = <1>; @@ -58,10 +109,11 @@ #clock-cells = <1>; - clocks = <&cgu X1000_CLK_RTCLK - &cgu X1000_CLK_EXCLK - &cgu X1000_CLK_PCLK>; - clock-names = "rtc", "ext", "pclk"; + clocks = <&cgu X1000_CLK_RTCLK>, + <&cgu X1000_CLK_EXCLK>, + <&cgu X1000_CLK_PCLK>, + <&cgu X1000_CLK_TCU>; + clock-names = "rtc", "ext", "pclk", "tcu"; interrupt-controller; #interrupt-cells = <1>; @@ -76,6 +128,18 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,x1000-pwm"; + reg = <0x40 0x50>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>; + clock-names = "timer0", "timer1", "timer2", "timer3", "timer4"; + }; }; rtc: rtc@10003000 { @@ -156,6 +220,64 @@ }; }; + uart0: serial@10030000 { + compatible = "ingenic,x1000-uart"; + reg = <0x10030000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <51>; + + clocks = <&exclk>, <&cgu X1000_CLK_UART0>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + uart1: serial@10031000 { + compatible = "ingenic,x1000-uart"; + reg = <0x10031000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <50>; + + clocks = <&exclk>, <&cgu X1000_CLK_UART1>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + uart2: serial@10032000 { + compatible = "ingenic,x1000-uart"; + reg = <0x10032000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <49>; + + clocks = <&exclk>, <&cgu X1000_CLK_UART2>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + ssi: spi@10043000 { + compatible = "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1000_CLK_SSI>; + clock-names = "spi"; + + dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>, + <&pdma X1000_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c-controller@10050000 { compatible = "ingenic,x1000-i2c"; reg = <0x10050000 0x1000>; @@ -198,55 +320,58 @@ status = "disabled"; }; - uart0: serial@10030000 { - compatible = "ingenic,x1000-uart"; - reg = <0x10030000 0x100>; + pdma: dma-controller@13420000 { + compatible = "ingenic,x1000-dma"; + reg = <0x13420000 0x400>, <0x13421000 0x40>; - interrupt-parent = <&intc>; - interrupts = <51>; + #dma-cells = <2>; - clocks = <&exclk>, <&cgu X1000_CLK_UART0>; - clock-names = "baud", "module"; + interrupt-parent = <&intc>; + interrupts = <10>; - status = "disabled"; + clocks = <&cgu X1000_CLK_PDMA>; }; - uart1: serial@10031000 { - compatible = "ingenic,x1000-uart"; - reg = <0x10031000 0x100>; + msc0: mmc@13450000 { + compatible = "ingenic,x1000-mmc"; + reg = <0x13450000 0x1000>; interrupt-parent = <&intc>; - interrupts = <50>; + interrupts = <37>; - clocks = <&exclk>, <&cgu X1000_CLK_UART1>; - clock-names = "baud", "module"; + clocks = <&cgu X1000_CLK_MSC0>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>, + <&pdma X1000_DMA_MSC0_TX 0xffffffff>; + dma-names = "rx", "tx"; status = "disabled"; }; - uart2: serial@10032000 { - compatible = "ingenic,x1000-uart"; - reg = <0x10032000 0x100>; + msc1: mmc@13460000 { + compatible = "ingenic,x1000-mmc"; + reg = <0x13460000 0x1000>; interrupt-parent = <&intc>; - interrupts = <49>; - - clocks = <&exclk>, <&cgu X1000_CLK_UART2>; - clock-names = "baud", "module"; + interrupts = <36>; - status = "disabled"; - }; + clocks = <&cgu X1000_CLK_MSC1>; + clock-names = "mmc"; - pdma: dma-controller@13420000 { - compatible = "ingenic,x1000-dma"; - reg = <0x13420000 0x400 - 0x13421000 0x40>; - #dma-cells = <2>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; - interrupt-parent = <&intc>; - interrupts = <10>; + dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>, + <&pdma X1000_DMA_MSC1_TX 0xffffffff>; + dma-names = "rx", "tx"; - clocks = <&cgu X1000_CLK_PDMA>; + status = "disabled"; }; mac: ethernet@134b0000 { @@ -260,6 +385,8 @@ clocks = <&cgu X1000_CLK_MAC>; clock-names = "stmmaceth"; + mode-reg = <&mac_phy_ctrl>; + status = "disabled"; mdio: mdio { @@ -271,45 +398,41 @@ }; }; - msc0: mmc@13450000 { - compatible = "ingenic,x1000-mmc"; - reg = <0x13450000 0x1000>; + otg: usb@13500000 { + compatible = "ingenic,x1000-otg"; + reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; - interrupts = <37>; + interrupts = <21>; - clocks = <&cgu X1000_CLK_MSC0>; - clock-names = "mmc"; + clocks = <&cgu X1000_CLK_OTG>; + clock-names = "otg"; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; + phys = <&otg_phy>; + phy-names = "usb2-phy"; - dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>, - <&pdma X1000_DMA_MSC0_TX 0xffffffff>; - dma-names = "rx", "tx"; + g-rx-fifo-size = <768>; + g-np-tx-fifo-size = <256>; + g-tx-fifo-size = <256 256 256 256 256 256 256 512>; status = "disabled"; }; - msc1: mmc@13460000 { - compatible = "ingenic,x1000-mmc"; - reg = <0x13460000 0x1000>; + aic: audio-controller@10020000 { + compatible = "ingenic,x1000-i2s"; + reg = <0x10020000 0x38>; - interrupt-parent = <&intc>; - interrupts = <36>; + #sound-dai-cells = <0>; - clocks = <&cgu X1000_CLK_MSC1>; - clock-names = "mmc"; + interrupt-parent = <&intc>; + interrupts = <1>; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; + clocks = <&cgu X1000_CLK_AIC>, + <&cgu X1000_CLK_I2S>; + clock-names = "aic", "i2s"; - dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>, - <&pdma X1000_DMA_MSC1_TX 0xffffffff>; + dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>, + <&pdma X1000_DMA_I2S0_TX 0xffffffff>; dma-names = "rx", "tx"; - - status = "disabled"; }; }; diff --git a/dts/src/mips/ingenic/x1830.dtsi b/dts/src/mips/ingenic/x1830.dtsi new file mode 100644 index 0000000000..65a5da71c1 --- /dev/null +++ b/dts/src/mips/ingenic/x1830.dtsi @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/ingenic,tcu.h> +#include <dt-bindings/clock/ingenic,x1830-cgu.h> +#include <dt-bindings/dma/x1830-dma.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ingenic,x1830"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "ingenic,xburst-fpu2.0-mxu2.0"; + reg = <0>; + + clocks = <&cgu X1830_CLK_CPU>; + clock-names = "cpu"; + }; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: interrupt-controller@10001000 { + compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc"; + reg = <0x10001000 0x50>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + exclk: ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + rtclk: rtc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + cgu: x1830-cgu@10000000 { + compatible = "ingenic,x1830-cgu", "simple-mfd"; + reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; + + #clock-cells = <1>; + + clocks = <&exclk>, <&rtclk>; + clock-names = "ext", "rtc"; + + otg_phy: usb-phy@3c { + compatible = "ingenic,x1830-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu X1830_CLK_OTGPHY>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + mac_phy_ctrl: mac-phy-ctrl@e8 { + compatible = "syscon"; + reg = <0xe8 0x4>; + }; + }; + + ost: timer@12000000 { + compatible = "ingenic,x1830-ost", "ingenic,x1000-ost"; + reg = <0x12000000 0x3c>; + + #clock-cells = <1>; + + clocks = <&cgu X1830_CLK_OST>; + clock-names = "ost"; + + interrupt-parent = <&cpuintc>; + interrupts = <4>; + }; + + tcu: timer@10002000 { + compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd"; + reg = <0x10002000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10002000 0x1000>; + + #clock-cells = <1>; + + clocks = <&cgu X1830_CLK_RTCLK>, + <&cgu X1830_CLK_EXCLK>, + <&cgu X1830_CLK_PCLK>, + <&cgu X1830_CLK_TCU>; + clock-names = "rtc", "ext", "pclk", "tcu"; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&intc>; + interrupts = <27 26 25>; + + wdt: watchdog@0 { + compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog"; + reg = <0x0 0x10>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; + + pwm: pwm@40 { + compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; + }; + + rtc: rtc@10003000 { + compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc"; + reg = <0x10003000 0x4c>; + + interrupt-parent = <&intc>; + interrupts = <32>; + + clocks = <&cgu X1830_CLK_RTCLK>; + clock-names = "rtc"; + }; + + pinctrl: pin-controller@10010000 { + compatible = "ingenic,x1830-pinctrl"; + reg = <0x10010000 0x800>; + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,x1830-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <17>; + }; + + gpb: gpio@1 { + compatible = "ingenic,x1830-gpio"; + reg = <1>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <16>; + }; + + gpc: gpio@2 { + compatible = "ingenic,x1830-gpio"; + reg = <2>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <15>; + }; + + gpd: gpio@3 { + compatible = "ingenic,x1830-gpio"; + reg = <3>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <14>; + }; + }; + + uart0: serial@10030000 { + compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; + reg = <0x10030000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <51>; + + clocks = <&exclk>, <&cgu X1830_CLK_UART0>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + uart1: serial@10031000 { + compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; + reg = <0x10031000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <50>; + + clocks = <&exclk>, <&cgu X1830_CLK_UART1>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + ssi0: spi@10043000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <9>; + + clocks = <&cgu X1830_CLK_SSI0>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>, + <&pdma X1830_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + ssi1: spi@10044000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10044000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1830_CLK_SSI1>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>, + <&pdma X1830_DMA_SSI1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + i2c0: i2c-controller@10050000 { + compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; + reg = <0x10050000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <60>; + + clocks = <&cgu X1830_CLK_SMB0>; + + status = "disabled"; + }; + + i2c1: i2c-controller@10051000 { + compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; + reg = <0x10051000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <59>; + + clocks = <&cgu X1830_CLK_SMB1>; + + status = "disabled"; + }; + + i2c2: i2c-controller@10052000 { + compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; + reg = <0x10052000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <58>; + + clocks = <&cgu X1830_CLK_SMB2>; + + status = "disabled"; + }; + + dtrng: trng@10072000 { + compatible = "ingenic,x1830-dtrng"; + reg = <0x10072000 0xc>; + + clocks = <&cgu X1830_CLK_DTRNG>; + + status = "disabled"; + }; + + pdma: dma-controller@13420000 { + compatible = "ingenic,x1830-dma"; + reg = <0x13420000 0x400>, <0x13421000 0x40>; + + #dma-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <10>; + + clocks = <&cgu X1830_CLK_PDMA>; + }; + + msc0: mmc@13450000 { + compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; + reg = <0x13450000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <37>; + + clocks = <&cgu X1830_CLK_MSC0>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>, + <&pdma X1830_DMA_MSC0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + msc1: mmc@13460000 { + compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; + reg = <0x13460000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <36>; + + clocks = <&cgu X1830_CLK_MSC1>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>, + <&pdma X1830_DMA_MSC1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + mac: ethernet@134b0000 { + compatible = "ingenic,x1830-mac", "snps,dwmac"; + reg = <0x134b0000 0x2000>; + + interrupt-parent = <&intc>; + interrupts = <55>; + interrupt-names = "macirq"; + + clocks = <&cgu X1830_CLK_MAC>; + clock-names = "stmmaceth"; + + mode-reg = <&mac_phy_ctrl>; + + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + otg: usb@13500000 { + compatible = "ingenic,x1830-otg"; + reg = <0x13500000 0x40000>; + + interrupt-parent = <&intc>; + interrupts = <21>; + + clocks = <&cgu X1830_CLK_OTG>; + clock-names = "otg"; + + phys = <&otg_phy>; + phy-names = "usb2-phy"; + + g-rx-fifo-size = <768>; + g-np-tx-fifo-size = <256>; + g-tx-fifo-size = <256 256 256 256 256 256 256 512>; + + status = "disabled"; + }; +}; diff --git a/dts/src/mips/lantiq/danube.dtsi b/dts/src/mips/lantiq/danube.dtsi index 510be63c8b..7a7ba66aa5 100644 --- a/dts/src/mips/lantiq/danube.dtsi +++ b/dts/src/mips/lantiq/danube.dtsi @@ -40,7 +40,6 @@ eiu0: eiu@101000 { #interrupt-cells = <1>; interrupt-controller; - interrupt-parent; compatible = "lantiq,eiu-xway"; reg = <0x101000 0x1000>; }; diff --git a/dts/src/mips/lantiq/easy50712.dts b/dts/src/mips/lantiq/danube_easy50712.dts index 1ce20b7d05..1ce20b7d05 100644 --- a/dts/src/mips/lantiq/easy50712.dts +++ b/dts/src/mips/lantiq/danube_easy50712.dts diff --git a/dts/src/mips/loongson/loongson64-2k1000.dtsi b/dts/src/mips/loongson/loongson64-2k1000.dtsi new file mode 100644 index 0000000000..ee3e2153dd --- /dev/null +++ b/dts/src/mips/loongson/loongson64-2k1000.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "loongson,loongson2k1000"; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "loongson,gs264"; + reg = <0x0>; + #clock-cells = <1>; + clocks = <&cpu_clk>; + }; + }; + + memory@200000 { + compatible = "memory"; + device_type = "memory"; + reg = <0x00000000 0x00200000 0x00000000 0x0ee00000>, /* 238 MB at 2 MB */ + <0x00000000 0x20000000 0x00000000 0x1f000000>, /* 496 MB at 512 MB */ + <0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */ + }; + + cpu_clk: cpu_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <800000000>; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + package0: bus@10000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* ioports */ + 0 0x40000000 0 0x40000000 0 0x40000000 + 0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>; + + pm: reset-controller@1fe07000 { + compatible = "loongson,ls2k-pm"; + reg = <0 0x1fe07000 0 0x422>; + }; + + liointc0: interrupt-controller@1fe11400 { + compatible = "loongson,liointc-2.0"; + reg = <0 0x1fe11400 0 0x40>, + <0 0x1fe11040 0 0x8>, + <0 0x1fe11140 0 0x8>; + reg-names = "main", "isr0", "isr1"; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + liointc1: interrupt-controller@1fe11440 { + compatible = "loongson,liointc-2.0"; + reg = <0 0x1fe11440 0 0x40>, + <0 0x1fe11048 0 0x8>, + <0 0x1fe11148 0 0x8>; + reg-names = "main", "isr0", "isr1"; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <3>; + interrupt-names = "int1"; + + loongson,parent_int_map = <0x00000000>, /* int0 */ + <0xffffffff>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + rtc0: rtc@1fe07800 { + compatible = "loongson,ls2k1000-rtc"; + reg = <0 0x1fe07800 0 0x78>; + interrupt-parent = <&liointc0>; + interrupts = <60 IRQ_TYPE_LEVEL_LOW>; + }; + + uart0: serial@1fe00000 { + compatible = "ns16550a"; + reg = <0 0x1fe00000 0 0x8>; + clock-frequency = <125000000>; + interrupt-parent = <&liointc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + no-loopback-test; + }; + + pci@1a000000 { + compatible = "loongson,ls2k-pci"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <2>; + + reg = <0 0x1a000000 0 0x02000000>, + <0xfe 0x00000000 0 0x20000000>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x18000000 0x0 0x00010000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + + gmac@3,0 { + compatible = "pci0014,7a03.0", + "pci0014,7a03", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>, + <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq", "eth_lpi"; + interrupt-parent = <&liointc0>; + phy-mode = "rgmii"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + gmac@3,1 { + compatible = "pci0014,7a03.0", + "pci0014,7a03", + "pciclass0c0320", + "pciclass0c03", + "loongson, pci-gmac"; + + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>, + <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq", "eth_lpi"; + interrupt-parent = <&liointc0>; + phy-mode = "rgmii"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; + }; + + ehci@4,1 { + compatible = "pci0014,7a14.0", + "pci0014,7a14", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x2100 0x0 0x0 0x0 0x0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + }; + + ohci@4,2 { + compatible = "pci0014,7a24.0", + "pci0014,7a24", + "pciclass0c0310", + "pciclass0c03"; + + reg = <0x2200 0x0 0x0 0x0 0x0>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + }; + + sata@8,0 { + compatible = "pci0014,7a08.0", + "pci0014,7a08", + "pciclass010601", + "pciclass0106"; + + reg = <0x4000 0x0 0x0 0x0 0x0>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc0>; + }; + + pci_bridge@9,0 { + compatible = "pci0014,7a19.0", + "pci0014,7a19", + "pciclass060400", + "pciclass0604"; + + reg = <0x4800 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>; + external-facing; + }; + + pci_bridge@a,0 { + compatible = "pci0014,7a09.0", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x5000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>; + external-facing; + }; + + pci_bridge@b,0 { + compatible = "pci0014,7a09.0", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x5800 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>; + external-facing; + }; + + pci_bridge@c,0 { + compatible = "pci0014,7a09.0", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x6000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>; + external-facing; + }; + + pci_bridge@d,0 { + compatible = "pci0014,7a19.0", + "pci0014,7a19", + "pciclass060400", + "pciclass0604"; + + reg = <0x6800 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>; + external-facing; + }; + + pci_bridge@e,0 { + compatible = "pci0014,7a09.0", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x7000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&liointc1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>; + external-facing; + }; + + }; + }; +}; + diff --git a/dts/src/mips/loongson/loongson64_2core_2k1000.dts b/dts/src/mips/loongson/loongson64_2core_2k1000.dts new file mode 100644 index 0000000000..e31d2ee65c --- /dev/null +++ b/dts/src/mips/loongson/loongson64_2core_2k1000.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "loongson64-2k1000.dtsi" + +/ { + compatible = "loongson,loongson64-2core-2k1000"; +}; + diff --git a/dts/src/mips/loongson/loongson3-package.dtsi b/dts/src/mips/loongson/loongson64c-package.dtsi index 5bb876a4de..5bb876a4de 100644 --- a/dts/src/mips/loongson/loongson3-package.dtsi +++ b/dts/src/mips/loongson/loongson64c-package.dtsi diff --git a/dts/src/mips/loongson/loongson64c_4core_ls7a.dts b/dts/src/mips/loongson/loongson64c_4core_ls7a.dts new file mode 100644 index 0000000000..c7ea4f1c0b --- /dev/null +++ b/dts/src/mips/loongson/loongson64c_4core_ls7a.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "loongson64c-package.dtsi" +#include "ls7a-pch.dtsi" + +/ { + compatible = "loongson,loongson64c-4core-ls7a"; +}; + +&package0 { + htvec: interrupt-controller@efdfb000080 { + compatible = "loongson,htvec-1.0"; + reg = <0xefd 0xfb000080 0x40>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&liointc>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <25 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pch { + msi: msi-controller@2ff00000 { + compatible = "loongson,pch-msi-1.0"; + reg = <0 0x2ff00000 0 0x8>; + interrupt-controller; + msi-controller; + loongson,msi-base-vec = <64>; + loongson,msi-num-vecs = <64>; + interrupt-parent = <&htvec>; + }; +}; diff --git a/dts/src/mips/loongson/loongson3_4core_rs780e.dts b/dts/src/mips/loongson/loongson64c_4core_rs780e.dts index 6b5694ca0f..d681a295df 100644 --- a/dts/src/mips/loongson/loongson3_4core_rs780e.dts +++ b/dts/src/mips/loongson/loongson64c_4core_rs780e.dts @@ -2,11 +2,11 @@ /dts-v1/; -#include "loongson3-package.dtsi" +#include "loongson64c-package.dtsi" #include "rs780e-pch.dtsi" / { - compatible = "loongson,loongson3-4core-rs780e"; + compatible = "loongson,loongson64c-4core-rs780e"; }; &package0 { diff --git a/dts/src/mips/loongson/loongson3_8core_rs780e.dts b/dts/src/mips/loongson/loongson64c_8core_rs780e.dts index ffefa2f829..3c2044142c 100644 --- a/dts/src/mips/loongson/loongson3_8core_rs780e.dts +++ b/dts/src/mips/loongson/loongson64c_8core_rs780e.dts @@ -2,11 +2,11 @@ /dts-v1/; -#include "loongson3-package.dtsi" +#include "loongson64c-package.dtsi" #include "rs780e-pch.dtsi" / { - compatible = "loongson,loongson3-8core-rs780e"; + compatible = "loongson,loongson64c-8core-rs780e"; }; &package0 { diff --git a/dts/src/mips/loongson/loongson64g-package.dtsi b/dts/src/mips/loongson/loongson64g-package.dtsi new file mode 100644 index 0000000000..d4314f62cc --- /dev/null +++ b/dts/src/mips/loongson/loongson64g-package.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + package0: bus@1fe00000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x1fe00000 0 0x1fe00000 0x100000 + 0 0x3ff00000 0 0x3ff00000 0x100000 + 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>; + + liointc: interrupt-controller@3ff01400 { + compatible = "loongson,liointc-1.0"; + reg = <0 0x3ff01400 0x64>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>; + interrupt-names = "int0", "int1"; + + loongson,parent_int_map = <0x00ffffff>, /* int0 */ + <0xff000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + + }; + + cpu_uart0: serial@1fe00100 { + compatible = "ns16550a"; + reg = <0 0x1fe00100 0x10>; + clock-frequency = <100000000>; + interrupt-parent = <&liointc>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + }; + + cpu_uart1: serial@1fe00110 { + status = "disabled"; + compatible = "ns16550a"; + reg = <0 0x1fe00110 0x10>; + clock-frequency = <100000000>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&liointc>; + no-loopback-test; + }; + }; +}; diff --git a/dts/src/mips/loongson/loongson64g_4core_ls7a.dts b/dts/src/mips/loongson/loongson64g_4core_ls7a.dts new file mode 100644 index 0000000000..c945f8565d --- /dev/null +++ b/dts/src/mips/loongson/loongson64g_4core_ls7a.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "loongson64g-package.dtsi" +#include "ls7a-pch.dtsi" + +/ { + compatible = "loongson,loongson64g-4core-ls7a"; +}; + +&package0 { + htvec: interrupt-controller@efdfb000080 { + compatible = "loongson,htvec-1.0"; + reg = <0xefd 0xfb000080 0x40>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&liointc>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <25 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <29 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <31 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pch { + msi: msi-controller@2ff00000 { + compatible = "loongson,pch-msi-1.0"; + reg = <0 0x2ff00000 0 0x8>; + interrupt-controller; + msi-controller; + loongson,msi-base-vec = <64>; + loongson,msi-num-vecs = <192>; + interrupt-parent = <&htvec>; + }; +}; diff --git a/dts/src/mips/loongson/loongson64v_4core_virtio.dts b/dts/src/mips/loongson/loongson64v_4core_virtio.dts new file mode 100644 index 0000000000..d0588d81e0 --- /dev/null +++ b/dts/src/mips/loongson/loongson64v_4core_virtio.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; +/ { + compatible = "loongson,loongson64v-4core-virtio"; + #address-cells = <2>; + #size-cells = <2>; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + package0: bus@1fe00000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x1fe00000 0 0x1fe00000 0x100000 + 0 0x3ff00000 0 0x3ff00000 0x100000 + 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>; + + liointc: interrupt-controller@3ff01400 { + compatible = "loongson,liointc-1.0"; + reg = <0 0x3ff01400 0x64>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>; + interrupt-names = "int0", "int1"; + + loongson,parent_int_map = <0x00000001>, /* int0 */ + <0xfffffffe>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + + }; + + cpu_uart0: serial@1fe001e0 { + compatible = "ns16550a"; + reg = <0 0x1fe001e0 0x8>; + clock-frequency = <33000000>; + interrupt-parent = <&liointc>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + }; + }; + + bus@10000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */ + 0 0x40000000 0 0x40000000 0 0x40000000>; /* PCI MEM */ + + rtc0: rtc@10081000 { + compatible = "google,goldfish-rtc"; + reg = <0 0x10081000 0 0x1000>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&liointc>; + }; + + pci@1a000000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + bus-range = <0x0 0x1f>; + reg = <0 0x1a000000 0 0x02000000>; + + ranges = <0x01000000 0x0 0x00004000 0x0 0x18004000 0x0 0x0000c000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + + interrupt-map = < + 0x0000 0x0 0x0 0x1 &liointc 0x2 IRQ_TYPE_LEVEL_HIGH + 0x0800 0x0 0x0 0x1 &liointc 0x3 IRQ_TYPE_LEVEL_HIGH + 0x1000 0x0 0x0 0x1 &liointc 0x4 IRQ_TYPE_LEVEL_HIGH + 0x1800 0x0 0x0 0x1 &liointc 0x5 IRQ_TYPE_LEVEL_HIGH + >; + + interrupt-map-mask = <0x1800 0x0 0x0 0x7>; + }; + + isa@18000000 { + compatible = "isa"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0 0x18000000 0x4000>; + }; + }; + + hypervisor { + compatible = "linux,kvm"; + }; +}; diff --git a/dts/src/mips/loongson/ls7a-pch.dtsi b/dts/src/mips/loongson/ls7a-pch.dtsi new file mode 100644 index 0000000000..cce9428afc --- /dev/null +++ b/dts/src/mips/loongson/ls7a-pch.dtsi @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + pch: bus@10000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */ + 0 0x20000000 0 0x20000000 0 0x10000000 + 0 0x40000000 0 0x40000000 0 0x40000000 /* PCI MEM */ + 0xe00 0x00000000 0xe00 0x00000000 0x100 0x0000000>; + + pic: interrupt-controller@10000000 { + compatible = "loongson,pch-pic-1.0"; + reg = <0 0x10000000 0 0x400>; + interrupt-controller; + interrupt-parent = <&htvec>; + loongson,pic-base-vec = <0>; + #interrupt-cells = <2>; + }; + + rtc0: rtc@100d0100 { + compatible = "loongson,ls7a-rtc"; + reg = <0 0x100d0100 0 0x78>; + interrupt-parent = <&pic>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + }; + + ls7a_uart0: serial@10080000 { + compatible = "ns16550a"; + reg = <0 0x10080000 0 0x100>; + clock-frequency = <50000000>; + interrupt-parent = <&pic>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + }; + + ls7a_uart1: serial@10080100 { + status = "disabled"; + compatible = "ns16550a"; + reg = <0 0x10080100 0 0x100>; + clock-frequency = <50000000>; + interrupt-parent = <&pic>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + }; + + ls7a_uart2: serial@10080200 { + status = "disabled"; + compatible = "ns16550a"; + reg = <0 0x10080200 0 0x100>; + clock-frequency = <50000000>; + interrupt-parent = <&pic>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + }; + + ls7a_uart3: serial@10080300 { + status = "disabled"; + compatible = "ns16550a"; + reg = <0 0x10080300 0 0x100>; + clock-frequency = <50000000>; + interrupt-parent = <&pic>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + }; + + pci@1a000000 { + compatible = "loongson,ls7a-pci"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <2>; + msi-parent = <&msi>; + + reg = <0 0x1a000000 0 0x02000000>, + <0xefe 0x00000000 0 0x20000000>; + + ranges = <0x01000000 0x0 0x00020000 0x0 0x18020000 0x0 0x00020000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + + ohci@4,0 { + compatible = "pci0014,7a24.0", + "pci0014,7a24", + "pciclass0c0310", + "pciclass0c03"; + + reg = <0x2000 0x0 0x0 0x0 0x0>; + interrupts = <49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + ehci@4,1 { + compatible = "pci0014,7a14.0", + "pci0014,7a14", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x2100 0x0 0x0 0x0 0x0>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + ohci@5,0 { + compatible = "pci0014,7a24.0", + "pci0014,7a24", + "pciclass0c0310", + "pciclass0c03"; + + reg = <0x2800 0x0 0x0 0x0 0x0>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + ehci@5,1 { + compatible = "pci0014,7a14.0", + "pci0014,7a14", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x2900 0x0 0x0 0x0 0x0>; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + sata@8,0 { + compatible = "pci0014,7a08.0", + "pci0014,7a08", + "pciclass010601", + "pciclass0106"; + + reg = <0x4000 0x0 0x0 0x0 0x0>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + sata@8,1 { + compatible = "pci0014,7a08.0", + "pci0014,7a08", + "pciclass010601", + "pciclass0106"; + + reg = <0x4100 0x0 0x0 0x0 0x0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + sata@8,2 { + compatible = "pci0014,7a08.0", + "pci0014,7a08", + "pciclass010601", + "pciclass0106"; + + reg = <0x4200 0x0 0x0 0x0 0x0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + gpu@6,0 { + compatible = "pci0014,7a15.0", + "pci0014,7a15", + "pciclass030200", + "pciclass0302"; + + reg = <0x3000 0x0 0x0 0x0 0x0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + dc@6,1 { + compatible = "pci0014,7a06.0", + "pci0014,7a06", + "pciclass030000", + "pciclass0300"; + + reg = <0x3100 0x0 0x0 0x0 0x0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + hda@7,0 { + compatible = "pci0014,7a07.0", + "pci0014,7a07", + "pciclass040300", + "pciclass0403"; + + reg = <0x3800 0x0 0x0 0x0 0x0>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + }; + + gmac@3,0 { + compatible = "pci0014,7a03.0", + "pci0014,7a03", + "pciclass020000", + "pciclass0200"; + + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + interrupt-parent = <&pic>; + phy-mode = "rgmii"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + gmac@3,1 { + compatible = "pci0014,7a03.0", + "pci0014,7a03", + "pciclass020000", + "pciclass0200", + "loongson, pci-gmac"; + + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + interrupt-parent = <&pic>; + phy-mode = "rgmii"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; + }; + + pci_bridge@9,0 { + compatible = "pci0014,7a19.1", + "pci0014,7a19", + "pciclass060400", + "pciclass0604"; + + reg = <0x4800 0x0 0x0 0x0 0x0>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 32 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@a,0 { + compatible = "pci0014,7a09.1", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x5000 0x0 0x0 0x0 0x0>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 33 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@b,0 { + compatible = "pci0014,7a09.1", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x5800 0x0 0x0 0x0 0x0>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 34 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@c,0 { + compatible = "pci0014,7a09.1", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x6000 0x0 0x0 0x0 0x0>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 35 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@d,0 { + compatible = "pci0014,7a19.1", + "pci0014,7a19", + "pciclass060400", + "pciclass0604"; + + reg = <0x6800 0x0 0x0 0x0 0x0>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 36 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@e,0 { + compatible = "pci0014,7a09.1", + "pci0014,7a09", + "pciclass060400", + "pciclass0604"; + + reg = <0x7000 0x0 0x0 0x0 0x0>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@f,0 { + compatible = "pci0014,7a29.1", + "pci0014,7a29", + "pciclass060400", + "pciclass0604"; + + reg = <0x7800 0x0 0x0 0x0 0x0>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 40 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@10,0 { + compatible = "pci0014,7a19.1", + "pci0014,7a19", + "pciclass060400", + "pciclass0604"; + + reg = <0x8000 0x0 0x0 0x0 0x0>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@11,0 { + compatible = "pci0014,7a29.1", + "pci0014,7a29", + "pciclass060400", + "pciclass0604"; + + reg = <0x8800 0x0 0x0 0x0 0x0>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 42 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@12,0 { + compatible = "pci0014,7a19.1", + "pci0014,7a19", + "pciclass060400", + "pciclass0604"; + + reg = <0x9000 0x0 0x0 0x0 0x0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 43 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@13,0 { + compatible = "pci0014,7a29.1", + "pci0014,7a29", + "pciclass060400", + "pciclass0604"; + + reg = <0x9800 0x0 0x0 0x0 0x0>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 38 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci_bridge@14,0 { + compatible = "pci0014,7a19.1", + "pci0014,7a19", + "pciclass060400", + "pciclass0604"; + + reg = <0xa000 0x0 0x0 0x0 0x0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &pic 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + isa@18000000 { + compatible = "isa"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0 0x18000000 0x20000>; + }; + }; +}; diff --git a/dts/src/mips/loongson/rs780e-pch.dtsi b/dts/src/mips/loongson/rs780e-pch.dtsi index 45c54d555f..6f459511e6 100644 --- a/dts/src/mips/loongson/rs780e-pch.dtsi +++ b/dts/src/mips/loongson/rs780e-pch.dtsi @@ -9,11 +9,23 @@ 0 0x40000000 0 0x40000000 0 0x40000000 0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>; - isa { + pci@1a000000 { + compatible = "loongson,rs780e-pci"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + reg = <0 0x1a000000 0 0x02000000>; + + ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x0000c000>, + <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>; + }; + + isa@18000000 { compatible = "isa"; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 0 0 0x1000>; + ranges = <1 0 0 0x18000000 0x4000>; rtc0: rtc@70 { compatible = "motorola,mc146818"; @@ -21,6 +33,11 @@ interrupts = <8>; interrupt-parent = <&htpic>; }; + + acpi@800 { + compatible = "loongson,rs780e-acpi"; + reg = <1 0x800 0x100>; + }; }; }; }; diff --git a/dts/src/mips/mobileye/eyeq5-epm5.dts b/dts/src/mips/mobileye/eyeq5-epm5.dts new file mode 100644 index 0000000000..6898b2d826 --- /dev/null +++ b/dts/src/mips/mobileye/eyeq5-epm5.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright 2023 Mobileye Vision Technologies Ltd. + */ + +/dts-v1/; + +#include "eyeq5.dtsi" + +/ { + compatible = "mobileye,eyeq5-epm5", "mobileye,eyeq5"; + model = "Mobile EyeQ5 MP5 Evaluation board"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0x02000000>, + <0x8 0x02000000 0x0 0x7E000000>; + }; +}; diff --git a/dts/src/mips/mobileye/eyeq5-fixed-clocks.dtsi b/dts/src/mips/mobileye/eyeq5-fixed-clocks.dtsi new file mode 100644 index 0000000000..78f5533a95 --- /dev/null +++ b/dts/src/mips/mobileye/eyeq5-fixed-clocks.dtsi @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright 2023 Mobileye Vision Technologies Ltd. + */ + +/ { + /* Fixed clock */ + pll_cpu: pll-cpu { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1500000000>; + }; + + pll_vdi: pll-vdi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1280000000>; + }; + + pll_per: pll-per { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2000000000>; + }; + + pll_ddr0: pll-ddr0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1857210000>; + }; + + pll_ddr1: pll-ddr1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1857210000>; + }; + +/* PLL_CPU derivatives */ + occ_cpu: occ-cpu { + compatible = "fixed-factor-clock"; + clocks = <&pll_cpu>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + si_css0_ref_clk: si-css0-ref-clk { /* gate ClkRstGen_si_css0_ref */ + compatible = "fixed-factor-clock"; + clocks = <&occ_cpu>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + cpc_clk: cpc-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core0_clk: core0-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core1_clk: core1-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core2_clk: core2-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + core3_clk: core3-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + cm_clk: cm-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + mem_clk: mem-clk { + compatible = "fixed-factor-clock"; + clocks = <&si_css0_ref_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + occ_isram: occ-isram { + compatible = "fixed-factor-clock"; + clocks = <&pll_cpu>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + isram_clk: isram-clk { /* gate ClkRstGen_isram */ + compatible = "fixed-factor-clock"; + clocks = <&occ_isram>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + occ_dbu: occ-dbu { + compatible = "fixed-factor-clock"; + clocks = <&pll_cpu>; + #clock-cells = <0>; + clock-div = <10>; + clock-mult = <1>; + }; + si_dbu_tp_pclk: si-dbu-tp-pclk { /* gate ClkRstGen_dbu */ + compatible = "fixed-factor-clock"; + clocks = <&occ_dbu>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; +/* PLL_VDI derivatives */ + occ_vdi: occ-vdi { + compatible = "fixed-factor-clock"; + clocks = <&pll_vdi>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + vdi_clk: vdi-clk { /* gate ClkRstGen_vdi */ + compatible = "fixed-factor-clock"; + clocks = <&occ_vdi>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + occ_can_ser: occ-can-ser { + compatible = "fixed-factor-clock"; + clocks = <&pll_vdi>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + }; + can_ser_clk: can-ser-clk { /* gate ClkRstGen_can_ser */ + compatible = "fixed-factor-clock"; + clocks = <&occ_can_ser>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + i2c_ser_clk: i2c-ser-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_vdi>; + #clock-cells = <0>; + clock-div = <20>; + clock-mult = <1>; + }; +/* PLL_PER derivatives */ + occ_periph: occ-periph { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + }; + periph_clk: periph-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + can_clk: can-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + spi_clk: spi-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + }; + i2c_clk: i2c-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "i2c_clk"; + }; + timer_clk: timer-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "timer_clk"; + }; + gpio_clk: gpio-clk { + compatible = "fixed-factor-clock"; + clocks = <&occ_periph>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "gpio_clk"; + }; + emmc_sys_clk: emmc-sys-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <10>; + clock-mult = <1>; + clock-output-names = "emmc_sys_clk"; + }; + ccf_ctrl_clk: ccf-ctrl-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "ccf_ctrl_clk"; + }; + occ_mjpeg_core: occ-mjpeg-core { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "occ_mjpeg_core"; + }; + hsm_clk: hsm-clk { /* gate ClkRstGen_hsm */ + compatible = "fixed-factor-clock"; + clocks = <&occ_mjpeg_core>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "hsm_clk"; + }; + mjpeg_core_clk: mjpeg-core-clk { /* gate ClkRstGen_mjpeg_gen */ + compatible = "fixed-factor-clock"; + clocks = <&occ_mjpeg_core>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "mjpeg_core_clk"; + }; + fcmu_a_clk: fcmu-a-clk { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <20>; + clock-mult = <1>; + clock-output-names = "fcmu_a_clk"; + }; + occ_pci_sys: occ-pci-sys { + compatible = "fixed-factor-clock"; + clocks = <&pll_per>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "occ_pci_sys"; + }; + pclk: pclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; /* 250MHz */ + }; + tsu_clk: tsu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; /* 125MHz */ + }; +}; diff --git a/dts/src/mips/mobileye/eyeq5.dtsi b/dts/src/mips/mobileye/eyeq5.dtsi new file mode 100644 index 0000000000..6cc5980e2f --- /dev/null +++ b/dts/src/mips/mobileye/eyeq5.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* +* Copyright 2023 Mobileye Vision Technologies Ltd. +*/ + +#include <dt-bindings/interrupt-controller/mips-gic.h> + +#include "eyeq5-fixed-clocks.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "img,i6500"; + reg = <0>; + clocks = <&core0_clk>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* These reserved memory regions are also defined in bootmanager + * for configuring inbound translation for BARS, don't change + * these without syncing with bootmanager + */ + shmem0_reserved: shmem@804000000 { + reg = <0x8 0x04000000 0x0 0x1000000>; + }; + shmem1_reserved: shmem@805000000 { + reg = <0x8 0x05000000 0x0 0x1000000>; + }; + pci0_msi_reserved: pci0-msi@806000000 { + reg = <0x8 0x06000000 0x0 0x100000>; + }; + pci1_msi_reserved: pci1-msi@806100000 { + reg = <0x8 0x06100000 0x0 0x100000>; + }; + + mini_coredump0_reserved: mini-coredump0@806200000 { + reg = <0x8 0x06200000 0x0 0x100000>; + }; + mhm_reserved_0: the-mhm-reserved-0@0 { + reg = <0x8 0x00000000 0x0 0x0000800>; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpu_intc: interrupt-controller { + compatible = "mti,cpu-interrupt-controller"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + soc: soc { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "simple-bus"; + + uart0: serial@800000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x800000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&occ_periph>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart1: serial@900000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x900000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&occ_periph>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart2: serial@a00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0xa00000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&occ_periph>; + clock-names = "uartclk", "apb_pclk"; + }; + + gic: interrupt-controller@140000 { + compatible = "mti,gic"; + reg = <0x0 0x140000 0x0 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + + /* + * Declare the interrupt-parent even though the mti,gic + * binding doesn't require it, such that the kernel can + * figure out that cpu_intc is the root interrupt + * controller & should be probed first. + */ + interrupt-parent = <&cpu_intc>; + + timer { + compatible = "mti,gic-timer"; + interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; + clocks = <&core0_clk>; + }; + }; + }; +}; diff --git a/dts/src/mips/mscc/jaguar2.dtsi b/dts/src/mips/mscc/jaguar2.dtsi new file mode 100644 index 0000000000..42b2b0a51d --- /dev/null +++ b/dts/src/mips/mscc/jaguar2.dtsi @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,jr2"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + gpio0 = &gpio; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb: ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@70000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x70000000 0x2c>; + }; + + intc: interrupt-controller@70000070 { + compatible = "mscc,jaguar2-icpu-intr"; + reg = <0x70000070 0x94>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@70100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + uart2: serial@70100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + gpio: pinctrl@71010038 { + compatible = "mscc,jaguar2-pinctrl"; + reg = <0x71010038 0x90>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 64>; + + uart_pins: uart-pins { + pins = "GPIO_10", "GPIO_11"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_24", "GPIO_25"; + function = "uart2"; + }; + + cs1_pins: cs1-pins { + pins = "GPIO_16"; + function = "si"; + }; + + cs2_pins: cs2-pins { + pins = "GPIO_17"; + function = "si"; + }; + + cs3_pins: cs3-pins { + pins = "GPIO_18"; + function = "si"; + }; + + i2c_pins: i2c-pins { + pins = "GPIO_14", "GPIO_15"; + function = "twi"; + }; + + i2c2_pins: i2c2-pins { + pins = "GPIO_28", "GPIO_29"; + function = "twi2"; + }; + }; + + i2c0: i2c@70100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x70100400 0x100>, <0x700001b8 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + + i2c2: i2c@70100c00 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + reg = <0x70100c00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + }; +}; diff --git a/dts/src/mips/mscc/jaguar2_common.dtsi b/dts/src/mips/mscc/jaguar2_common.dtsi new file mode 100644 index 0000000000..679ff0d8ed --- /dev/null +++ b/dts/src/mips/mscc/jaguar2_common.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +#include "jaguar2.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +}; diff --git a/dts/src/mips/mscc/jaguar2_pcb110.dts b/dts/src/mips/mscc/jaguar2_pcb110.dts new file mode 100644 index 0000000000..1813f4e32e --- /dev/null +++ b/dts/src/mips/mscc/jaguar2_pcb110.dts @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board"; + compatible = "mscc,jr2-pcb110", "mscc,jr2"; + + aliases { + i2c0 = &i2c0; + i2c108 = &i2c108; + i2c109 = &i2c109; + i2c110 = &i2c110; + i2c111 = &i2c111; + i2c112 = &i2c112; + i2c113 = &i2c113; + i2c114 = &i2c114; + i2c115 = &i2c115; + i2c116 = &i2c116; + i2c117 = &i2c117; + i2c118 = &i2c118; + i2c119 = &i2c119; + i2c120 = &i2c120; + i2c121 = &i2c121; + i2c122 = &i2c122; + i2c123 = &i2c123; + i2c124 = &i2c124; + i2c125 = &i2c125; + i2c126 = &i2c126; + i2c127 = &i2c127; + i2c128 = &i2c128; + i2c129 = &i2c129; + i2c130 = &i2c130; + i2c131 = &i2c131; + i2c149 = &i2c149; + i2c150 = &i2c150; + i2c151 = &i2c151; + i2c152 = &i2c152; + }; + i2c0_imux: i2c0-imux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c149", "i2c150", "i2c151", "i2c152", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_pins_i>; + i2c149: i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c150: i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c152: i2c@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c0_emux: i2c0-emux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + mux-gpios = <&gpio 51 GPIO_ACTIVE_HIGH + &gpio 52 GPIO_ACTIVE_HIGH + &gpio 53 GPIO_ACTIVE_HIGH + &gpio 58 GPIO_ACTIVE_HIGH + &gpio 59 GPIO_ACTIVE_HIGH>; + idle-state = <0x0>; + i2c108: i2c@10 { + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c109: i2c@11 { + reg = <0x11>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c110: i2c@12 { + reg = <0x12>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c111: i2c@13 { + reg = <0x13>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c112: i2c@14 { + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c113: i2c@15 { + reg = <0x15>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c114: i2c@16 { + reg = <0x16>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c115: i2c@17 { + reg = <0x17>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c116: i2c@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c117: i2c@9 { + reg = <0x9>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c118: i2c@a { + reg = <0xa>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c119: i2c@b { + reg = <0xb>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c120: i2c@c { + reg = <0xc>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c121: i2c@d { + reg = <0xd>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c122: i2c@e { + reg = <0xe>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c123: i2c@f { + reg = <0xf>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + synce_pins: synce-pins { + // GPIO 16 == SI_nCS1 + pins = "GPIO_16"; + function = "si"; + }; + synce_builtin_pins: synce-builtin-pins { + // GPIO 49 == SI_nCS13 + pins = "GPIO_49"; + function = "si"; + }; + i2cmux_pins_i: i2cmux-pins { + pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0-pins { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1-pins { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2-pins { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3-pins { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; + +&i2c0 { + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + i2c124: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c125: i2c@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c126: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c127: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + i2c-mux@71 { + compatible = "nxp,pca9545"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + i2c128: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c129: i2c@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c130: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c131: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; diff --git a/dts/src/mips/mscc/jaguar2_pcb111.dts b/dts/src/mips/mscc/jaguar2_pcb111.dts new file mode 100644 index 0000000000..05d8c6a96d --- /dev/null +++ b/dts/src/mips/mscc/jaguar2_pcb111.dts @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" + +/ { + model = "Jaguar2 Cu48 PCB111 Reference Board"; + compatible = "mscc,jr2-pcb111", "mscc,jr2"; + + aliases { + i2c0 = &i2c0; + i2c149 = &i2c149; + i2c150 = &i2c150; + i2c151 = &i2c151; + i2c152 = &i2c152; + i2c203 = &i2c203; + }; + + i2c0_imux: i2c0-imux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c149", "i2c150", "i2c151", "i2c152", "i2c203", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_pins_i>; // Added by convention for PoE + pinctrl-5 = <&i2cmux_pins_i>; + i2c149: i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c150: i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c152: i2c@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c203: i2c@4 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + synce_builtin_pins: synce-builtin-pins { + // GPIO 49 == SI_nCS13 + pins = "GPIO_49"; + function = "si"; + }; + cpld_pins: cpld-pins { + // GPIO 50 == SI_nCS14 + pins = "GPIO_50"; + function = "si"; + }; + cpld_fifo_pins: synce-builtin-pins { + // GPIO 51 == SI_nCS15 + pins = "GPIO_51"; + function = "si"; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins { + pins = "GPIO_17", "GPIO_18"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0-pins { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1-pins { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2-pins { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3-pins { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; diff --git a/dts/src/mips/mscc/jaguar2_pcb118.dts b/dts/src/mips/mscc/jaguar2_pcb118.dts new file mode 100644 index 0000000000..cf2cf591a2 --- /dev/null +++ b/dts/src/mips/mscc/jaguar2_pcb118.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" + +/ { + model = "Jaguar2/Aquantia PCB118 Reference Board"; + compatible = "mscc,jr2-pcb118", "mscc,jr2"; + + aliases { + i2c150 = &i2c150; + i2c151 = &i2c151; + }; + + i2c0_imux: i2c0-imux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c150", "i2c151", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_pins_i>; + i2c150: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins { + pins = "GPIO_17", "GPIO_16"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0-pins { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1-pins { + pins = "GPIO_16"; + function = "twi_scl_m"; + output-high; + }; +}; diff --git a/dts/src/mips/mscc/luton.dtsi b/dts/src/mips/mscc/luton.dtsi new file mode 100644 index 0000000000..2a170b84c5 --- /dev/null +++ b/dts/src/mips/mscc/luton.dtsi @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020 Microsemi Corporation */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,luton"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416666666>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb@60000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x60000000 0x20000000>; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@10000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x10000000 0x2c>; + }; + + intc: interrupt-controller@10000084 { + compatible = "mscc,luton-icpu-intr"; + reg = <0x10000084 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@10100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x10100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + i2c0: i2c@10100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x10100400 0x100>, <0x100002a4 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + + gpio: pinctrl@70068 { + compatible = "mscc,luton-pinctrl"; + reg = <0x70068 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 32>; + interrupt-controller; + interrupts = <13>; + #interrupt-cells = <2>; + + i2c_pins: i2c-pins { + pins = "GPIO_5", "GPIO_6"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_30", "GPIO_31"; + function = "uart"; + }; + + }; + }; +}; diff --git a/dts/src/mips/mscc/luton_pcb091.dts b/dts/src/mips/mscc/luton_pcb091.dts new file mode 100644 index 0000000000..26ef6285d7 --- /dev/null +++ b/dts/src/mips/mscc/luton_pcb091.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/dts-v1/; + +#include "luton.dtsi" + +/ { + model = "Luton10 PCB091 Reference Board"; + compatible = "mscc,luton-pcb091", "mscc,luton"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +}; diff --git a/dts/src/mips/mscc/ocelot.dtsi b/dts/src/mips/mscc/ocelot.dtsi index 797d336db5..6bd8a1ad94 100644 --- a/dts/src/mips/mscc/ocelot.dtsi +++ b/dts/src/mips/mscc/ocelot.dtsi @@ -134,13 +134,16 @@ <0x1280000 0x100>, <0x1800000 0x80000>, <0x1880000 0x10000>, - <0x1060000 0x10000>; + <0x1040000 0x10000>, + <0x1050000 0x10000>, + <0x1060000 0x10000>, + <0x1a0 0x1c4>; reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", "port2", "port3", "port4", "port5", "port6", "port7", "port8", "port9", "port10", "qsys", - "ana", "s2"; - interrupts = <18 21 22>; - interrupt-names = "ptp_rdy", "xtr", "inj"; + "ana", "s0", "s1", "s2", "fdma"; + interrupts = <18 21 22 16>; + interrupt-names = "ptp_rdy", "xtr", "inj", "fdma"; ethernet-ports { #address-cells = <1>; @@ -148,36 +151,47 @@ port0: port@0 { reg = <0>; + status = "disabled"; }; port1: port@1 { reg = <1>; + status = "disabled"; }; port2: port@2 { reg = <2>; + status = "disabled"; }; port3: port@3 { reg = <3>; + status = "disabled"; }; port4: port@4 { reg = <4>; + status = "disabled"; }; port5: port@5 { reg = <5>; + status = "disabled"; }; port6: port@6 { reg = <6>; + status = "disabled"; }; port7: port@7 { reg = <7>; + status = "disabled"; }; port8: port@8 { reg = <8>; + status = "disabled"; }; port9: port@9 { reg = <9>; + status = "disabled"; }; port10: port@10 { reg = <10>; + status = "disabled"; }; }; }; @@ -212,9 +226,9 @@ function = "uart2"; }; - miim1: miim1 { + miim1_pins: miim1-pins { pins = "GPIO_14", "GPIO_15"; - function = "miim1"; + function = "miim"; }; }; @@ -248,7 +262,7 @@ reg = <0x10700c0 0x24>; interrupts = <15>; pinctrl-names = "default"; - pinctrl-0 = <&miim1>; + pinctrl-0 = <&miim1_pins>; status = "disabled"; }; diff --git a/dts/src/mips/mscc/ocelot_pcb120.dts b/dts/src/mips/mscc/ocelot_pcb120.dts index 33991fd209..d348742c23 100644 --- a/dts/src/mips/mscc/ocelot_pcb120.dts +++ b/dts/src/mips/mscc/ocelot_pcb120.dts @@ -3,6 +3,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy-ocelot-serdes.h> #include "ocelot.dtsi" @@ -21,10 +22,15 @@ }; &gpio { - phy_int_pins: phy_int_pins { + phy_int_pins: phy-int-pins { pins = "GPIO_4"; function = "gpio"; }; + + phy_load_save_pins: phy-load-save-pins { + pins = "GPIO_10"; + function = "ptp2"; + }; }; &mdio0 { @@ -34,65 +40,81 @@ &mdio1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&miim1>, <&phy_int_pins>; + pinctrl-0 = <&miim1_pins>, <&phy_int_pins>, <&phy_load_save_pins>; phy7: ethernet-phy@0 { reg = <0>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; phy6: ethernet-phy@1 { reg = <1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; phy5: ethernet-phy@2 { reg = <2>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; phy4: ethernet-phy@3 { reg = <3>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; }; &port0 { + status = "okay"; phy-handle = <&phy0>; + phy-mode = "internal"; }; &port1 { + status = "okay"; phy-handle = <&phy1>; + phy-mode = "internal"; }; &port2 { + status = "okay"; phy-handle = <&phy2>; + phy-mode = "internal"; }; &port3 { + status = "okay"; phy-handle = <&phy3>; + phy-mode = "internal"; }; &port4 { + status = "okay"; phy-handle = <&phy7>; phy-mode = "sgmii"; phys = <&serdes 4 SERDES1G(2)>; }; &port5 { + status = "okay"; phy-handle = <&phy4>; phy-mode = "sgmii"; phys = <&serdes 5 SERDES1G(5)>; }; &port6 { + status = "okay"; phy-handle = <&phy6>; phy-mode = "sgmii"; phys = <&serdes 6 SERDES1G(3)>; }; &port9 { + status = "okay"; phy-handle = <&phy5>; phy-mode = "sgmii"; phys = <&serdes 9 SERDES1G(4)>; diff --git a/dts/src/mips/mscc/ocelot_pcb123.dts b/dts/src/mips/mscc/ocelot_pcb123.dts index ef852f382d..0185045c76 100644 --- a/dts/src/mips/mscc/ocelot_pcb123.dts +++ b/dts/src/mips/mscc/ocelot_pcb123.dts @@ -47,17 +47,25 @@ }; &port0 { + status = "okay"; phy-handle = <&phy0>; + phy-mode = "internal"; }; &port1 { + status = "okay"; phy-handle = <&phy1>; + phy-mode = "internal"; }; &port2 { + status = "okay"; phy-handle = <&phy2>; + phy-mode = "internal"; }; &port3 { + status = "okay"; phy-handle = <&phy3>; + phy-mode = "internal"; }; diff --git a/dts/src/mips/mscc/serval.dtsi b/dts/src/mips/mscc/serval.dtsi new file mode 100644 index 0000000000..089ce89df1 --- /dev/null +++ b/dts/src/mips/mscc/serval.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,serval"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416666666>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb: ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@70000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x70000000 0x2c>; + }; + + intc: interrupt-controller@70000070 { + compatible = "mscc,serval-icpu-intr"; + reg = <0x70000070 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@70100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + uart2: serial@70100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,serval-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1"; + function = "sg0"; + }; + + i2c_pins: i2c-pins { + pins = "GPIO_6", "GPIO_7"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_26", "GPIO_27"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_13", "GPIO_14"; + function = "uart2"; + }; + + cs1_pins: cs1-pins { + pins = "GPIO_8"; + function = "si"; + }; + + irqext0_pins: irqext0-pins { + pins = "GPIO_28"; + function = "irq0"; + }; + + irqext1_pins: irqext1-pins { + pins = "GPIO_29"; + function = "irq1"; + }; + }; + + i2c0: i2c@70100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x70100400 0x100>, <0x70000190 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + }; +}; diff --git a/dts/src/mips/mscc/serval_common.dtsi b/dts/src/mips/mscc/serval_common.dtsi new file mode 100644 index 0000000000..5dc1eac49e --- /dev/null +++ b/dts/src/mips/mscc/serval_common.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +#include "serval.dtsi" + +/ { + aliases { + serial0 = &uart0; + i2c104 = &i2c104; + i2c105 = &i2c105; + i2c106 = &i2c106; + i2c107 = &i2c107; + i2c108 = &i2c108; + i2c109 = &i2c109; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2c0_imux: i2c0-imux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c104", "i2c105", "i2c106", "i2c107", + "i2c108", "i2c109", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_4>; + pinctrl-5 = <&i2cmux_5>; + pinctrl-6 = <&i2cmux_pins_i>; + i2c104: i2c_sfp0@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c105: i2c_sfp1@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c106: i2c_sfp2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c107: i2c_sfp3@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c108: i2c_sfp4@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c109: i2c_sfp5@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&gpio { + i2c_pins: i2c-pins { + pins = "GPIO_7"; /* No "default" scl for i2c0 */ + function = "twi"; + }; + i2cmux_pins_i: i2cmux-pins { + pins = "GPIO_11", "GPIO_12", "GPIO_18", "GPIO_19", + "GPIO_20", "GPIO_21"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0-pins { + pins = "GPIO_11"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1-pins { + pins = "GPIO_12"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2-pins { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3-pins { + pins = "GPIO_19"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_4: i2cmux-4-pins { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_5: i2cmux-5-pins { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +}; + diff --git a/dts/src/mips/mscc/serval_pcb105.dts b/dts/src/mips/mscc/serval_pcb105.dts new file mode 100644 index 0000000000..a1b0012b79 --- /dev/null +++ b/dts/src/mips/mscc/serval_pcb105.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB105 Reference Board"; + compatible = "mscc,serval-pcb105", "mscc,serval"; + + aliases { + }; + +}; + diff --git a/dts/src/mips/mscc/serval_pcb106.dts b/dts/src/mips/mscc/serval_pcb106.dts new file mode 100644 index 0000000000..237be7c8da --- /dev/null +++ b/dts/src/mips/mscc/serval_pcb106.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB106 Reference Board"; + compatible = "mscc,serval-pcb106", "mscc,serval"; + + aliases { + }; + +}; + diff --git a/dts/src/mips/mti/sead3.dts b/dts/src/mips/mti/sead3.dts index 192c26ff1d..046c97a297 100644 --- a/dts/src/mips/mti/sead3.dts +++ b/dts/src/mips/mti/sead3.dts @@ -56,7 +56,7 @@ interrupt-parent = <&cpu_intc>; }; - ehci@1b200000 { + usb@1b200000 { compatible = "generic-ehci"; reg = <0x1b200000 0x1000>; @@ -244,7 +244,7 @@ no-loopback-test; }; - eth@1f010000 { + ethernet@1f010000 { compatible = "smsc,lan9115"; reg = <0x1f010000 0x10000>; reg-io-width = <4>; diff --git a/dts/src/mips/netlogic/xlp_evp.dts b/dts/src/mips/netlogic/xlp_evp.dts deleted file mode 100644 index e63e55926e..0000000000 --- a/dts/src/mips/netlogic/xlp_evp.dts +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * XLP8XX Device Tree Source for EVP boards - */ - -/dts-v1/; -/ { - model = "netlogic,XLP-EVP"; - compatible = "netlogic,xlp"; - #address-cells = <2>; - #size-cells = <2>; - - soc { - #address-cells = <2>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG - 1 0 0 0x16000000 0x02000000>; // GBU chipselects - - serial0: serial@30000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x30100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <133333333>; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - serial1: serial@31000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x31100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <133333333>; - interrupt-parent = <&pic>; - interrupts = <18>; - }; - i2c0: ocores@32000 { - compatible = "opencores,i2c-ocores"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x32100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <32000000>; - interrupt-parent = <&pic>; - interrupts = <30>; - }; - i2c1: ocores@33000 { - compatible = "opencores,i2c-ocores"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x33100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <32000000>; - interrupt-parent = <&pic>; - interrupts = <31>; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; - - dtt@4c { - compatible = "national,lm90"; - reg = <0x4c>; - }; - }; - pic: pic@4000 { - compatible = "netlogic,xlp-pic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0 0x4000 0x200>; - interrupt-controller; - }; - - nor_flash@1,0 { - compatible = "cfi-flash"; - #address-cells = <1>; - #size-cells = <1>; - bank-width = <2>; - reg = <1 0 0x1000000>; - - partition@0 { - label = "x-loader"; - reg = <0x0 0x100000>; /* 1M */ - read-only; - }; - - partition@100000 { - label = "u-boot"; - reg = <0x100000 0x100000>; /* 1M */ - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; /* 5M */ - }; - - partition@700000 { - label = "rootfs"; - reg = <0x700000 0x800000>; /* 8M */ - }; - - partition@f00000 { - label = "env"; - reg = <0xf00000 0x100000>; /* 1M */ - read-only; - }; - }; - - gpio: xlp_gpio@34100 { - compatible = "netlogic,xlp832-gpio"; - reg = <0 0x34100 0x1000>; - #gpio-cells = <2>; - gpio-controller; - - #interrupt-cells = <2>; - interrupt-parent = <&pic>; - interrupts = <39>; - interrupt-controller; - }; - }; - - chosen { - bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; - }; -}; diff --git a/dts/src/mips/netlogic/xlp_fvp.dts b/dts/src/mips/netlogic/xlp_fvp.dts deleted file mode 100644 index d05abf13fb..0000000000 --- a/dts/src/mips/netlogic/xlp_fvp.dts +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * XLP2XX Device Tree Source for FVP boards - */ - -/dts-v1/; -/ { - model = "netlogic,XLP-FVP"; - compatible = "netlogic,xlp"; - #address-cells = <2>; - #size-cells = <2>; - - soc { - #address-cells = <2>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG - 1 0 0 0x16000000 0x02000000>; // GBU chipselects - - serial0: serial@30000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x30100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <133333333>; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - serial1: serial@31000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x31100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <133333333>; - interrupt-parent = <&pic>; - interrupts = <18>; - }; - i2c0: ocores@37100 { - compatible = "opencores,i2c-ocores"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x37100 0x20>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <32000000>; - interrupt-parent = <&pic>; - interrupts = <30>; - }; - i2c1: ocores@37120 { - compatible = "opencores,i2c-ocores"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x37120 0x20>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <32000000>; - interrupt-parent = <&pic>; - interrupts = <31>; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; - - dtt@4c { - compatible = "national,lm90"; - reg = <0x4c>; - }; - }; - pic: pic@4000 { - compatible = "netlogic,xlp-pic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0 0x4000 0x200>; - interrupt-controller; - }; - - nor_flash@1,0 { - compatible = "cfi-flash"; - #address-cells = <1>; - #size-cells = <1>; - bank-width = <2>; - reg = <1 0 0x1000000>; - - partition@0 { - label = "x-loader"; - reg = <0x0 0x100000>; /* 1M */ - read-only; - }; - - partition@100000 { - label = "u-boot"; - reg = <0x100000 0x100000>; /* 1M */ - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; /* 5M */ - }; - - partition@700000 { - label = "rootfs"; - reg = <0x700000 0x800000>; /* 8M */ - }; - - partition@f00000 { - label = "env"; - reg = <0xf00000 0x100000>; /* 1M */ - read-only; - }; - }; - - gpio: xlp_gpio@34100 { - compatible = "netlogic,xlp208-gpio"; - reg = <0 0x34100 0x1000>; - #gpio-cells = <2>; - gpio-controller; - - #interrupt-cells = <2>; - interrupt-parent = <&pic>; - interrupts = <39>; - interrupt-controller; - }; - }; - - chosen { - bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; - }; -}; diff --git a/dts/src/mips/netlogic/xlp_gvp.dts b/dts/src/mips/netlogic/xlp_gvp.dts deleted file mode 100644 index d47de48517..0000000000 --- a/dts/src/mips/netlogic/xlp_gvp.dts +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * XLP9XX Device Tree Source for GVP boards - */ - -/dts-v1/; -/ { - model = "netlogic,XLP-GVP"; - compatible = "netlogic,xlp"; - #address-cells = <2>; - #size-cells = <2>; - - soc { - #address-cells = <2>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG - 1 0 0 0x16000000 0x02000000>; // GBU chipselects - - serial0: serial@30000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x112100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <125000000>; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - pic: pic@110000 { - compatible = "netlogic,xlp-pic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0 0x110000 0x200>; - interrupt-controller; - }; - - nor_flash@1,0 { - compatible = "cfi-flash"; - #address-cells = <1>; - #size-cells = <1>; - bank-width = <2>; - reg = <1 0 0x1000000>; - - partition@0 { - label = "x-loader"; - reg = <0x0 0x100000>; /* 1M */ - read-only; - }; - - partition@100000 { - label = "u-boot"; - reg = <0x100000 0x100000>; /* 1M */ - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; /* 5M */ - }; - - partition@700000 { - label = "rootfs"; - reg = <0x700000 0x800000>; /* 8M */ - }; - - partition@f00000 { - label = "env"; - reg = <0xf00000 0x100000>; /* 1M */ - read-only; - }; - }; - - gpio: xlp_gpio@114100 { - compatible = "netlogic,xlp980-gpio"; - reg = <0 0x114100 0x1000>; - #gpio-cells = <2>; - gpio-controller; - - #interrupt-cells = <2>; - interrupt-parent = <&pic>; - interrupts = <39>; - interrupt-controller; - }; - }; - - chosen { - bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; - }; -}; diff --git a/dts/src/mips/netlogic/xlp_rvp.dts b/dts/src/mips/netlogic/xlp_rvp.dts deleted file mode 100644 index aa0faee194..0000000000 --- a/dts/src/mips/netlogic/xlp_rvp.dts +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * XLP5XX Device Tree Source for RVP boards - */ - -/dts-v1/; -/ { - model = "netlogic,XLP-RVP"; - compatible = "netlogic,xlp"; - #address-cells = <2>; - #size-cells = <2>; - - soc { - #address-cells = <2>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG - 1 0 0 0x16000000 0x02000000>; // GBU chipselects - - serial0: serial@30000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x112100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <125000000>; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - pic: pic@110000 { - compatible = "netlogic,xlp-pic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0 0x110000 0x200>; - interrupt-controller; - }; - - nor_flash@1,0 { - compatible = "cfi-flash"; - #address-cells = <1>; - #size-cells = <1>; - bank-width = <2>; - reg = <1 0 0x1000000>; - - partition@0 { - label = "x-loader"; - reg = <0x0 0x100000>; /* 1M */ - read-only; - }; - - partition@100000 { - label = "u-boot"; - reg = <0x100000 0x100000>; /* 1M */ - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; /* 5M */ - }; - - partition@700000 { - label = "rootfs"; - reg = <0x700000 0x800000>; /* 8M */ - }; - - partition@f00000 { - label = "env"; - reg = <0xf00000 0x100000>; /* 1M */ - read-only; - }; - }; - - gpio: xlp_gpio@114100 { - compatible = "netlogic,xlp532-gpio"; - reg = <0 0x114100 0x1000>; - #gpio-cells = <2>; - gpio-controller; - - #interrupt-cells = <2>; - interrupt-parent = <&pic>; - interrupts = <39>; - interrupt-controller; - }; - }; - - chosen { - bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; - }; -}; diff --git a/dts/src/mips/netlogic/xlp_svp.dts b/dts/src/mips/netlogic/xlp_svp.dts deleted file mode 100644 index 3bb0b2e08e..0000000000 --- a/dts/src/mips/netlogic/xlp_svp.dts +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * XLP3XX Device Tree Source for SVP boards - */ - -/dts-v1/; -/ { - model = "netlogic,XLP-SVP"; - compatible = "netlogic,xlp"; - #address-cells = <2>; - #size-cells = <2>; - - soc { - #address-cells = <2>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG - 1 0 0 0x16000000 0x02000000>; // GBU chipselects - - serial0: serial@30000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x30100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <133333333>; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - serial1: serial@31000 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0 0x31100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <133333333>; - interrupt-parent = <&pic>; - interrupts = <18>; - }; - i2c0: ocores@32000 { - compatible = "opencores,i2c-ocores"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x32100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <32000000>; - interrupt-parent = <&pic>; - interrupts = <30>; - }; - i2c1: ocores@33000 { - compatible = "opencores,i2c-ocores"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x33100 0xa00>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <32000000>; - interrupt-parent = <&pic>; - interrupts = <31>; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; - - dtt@4c { - compatible = "national,lm90"; - reg = <0x4c>; - }; - }; - pic: pic@4000 { - compatible = "netlogic,xlp-pic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0 0x4000 0x200>; - interrupt-controller; - }; - - nor_flash@1,0 { - compatible = "cfi-flash"; - #address-cells = <1>; - #size-cells = <1>; - bank-width = <2>; - reg = <1 0 0x1000000>; - - partition@0 { - label = "x-loader"; - reg = <0x0 0x100000>; /* 1M */ - read-only; - }; - - partition@100000 { - label = "u-boot"; - reg = <0x100000 0x100000>; /* 1M */ - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; /* 5M */ - }; - - partition@700000 { - label = "rootfs"; - reg = <0x700000 0x800000>; /* 8M */ - }; - - partition@f00000 { - label = "env"; - reg = <0xf00000 0x100000>; /* 1M */ - read-only; - }; - }; - - gpio: xlp_gpio@34100 { - compatible = "netlogic,xlp316-gpio"; - reg = <0 0x34100 0x1000>; - #gpio-cells = <2>; - gpio-controller; - - #interrupt-cells = <2>; - interrupt-parent = <&pic>; - interrupts = <39>; - interrupt-controller; - }; - }; - - chosen { - bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; - }; -}; diff --git a/dts/src/mips/pic32/pic32mzda.dtsi b/dts/src/mips/pic32/pic32mzda.dtsi index f1e3dad6be..fdc721b414 100644 --- a/dts/src/mips/pic32/pic32mzda.dtsi +++ b/dts/src/mips/pic32/pic32mzda.dtsi @@ -75,7 +75,7 @@ microchip,external-irqs = <3 8 13 18 23>; }; - pic32_pinctrl: pinctrl@1f801400{ + pic32_pinctrl: pinctrl@1f801400 { #address-cells = <1>; #size-cells = <1>; compatible = "microchip,pic32mzda-pinctrl"; diff --git a/dts/src/mips/pic32/pic32mzda_sk.dts b/dts/src/mips/pic32/pic32mzda_sk.dts index d7fa5d55db..b1c5ffdb33 100644 --- a/dts/src/mips/pic32/pic32mzda_sk.dts +++ b/dts/src/mips/pic32/pic32mzda_sk.dts @@ -28,19 +28,19 @@ pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; - led@1 { + led-1 { label = "pic32mzda_sk:red:led1"; gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - led@2 { + led-2 { label = "pic32mzda_sk:yellow:led2"; gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; - led@3 { + led-3 { label = "pic32mzda_sk:green:led3"; gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -52,22 +52,19 @@ pinctrl-0 = <&user_buttons_s0>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - - button@sw1 { + button-1 { label = "ESC"; linux,code = <1>; gpios = <&gpio1 12 0>; }; - button@sw2 { + button-2 { label = "Home"; linux,code = <102>; gpios = <&gpio1 13 0>; }; - button@sw3 { + button-3 { label = "Menu"; linux,code = <139>; gpios = <&gpio1 14 0>; diff --git a/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts b/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts index 7fccf63572..f894fe1781 100644 --- a/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts +++ b/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts @@ -23,17 +23,15 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; - button@1 { + button-1 { label = "qss"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; @@ -43,23 +41,23 @@ leds { compatible = "gpio-leds"; - led@0 { + led-0 { label = "tp-link:green:usb"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; - led@1 { + led-1 { label = "tp-link:green:system"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - led@2 { + led-2 { label = "tp-link:green:qss"; gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; }; - led@3 { + led-3 { label = "tp-link:green:wlan"; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/mips/qca/ar9331.dtsi b/dts/src/mips/qca/ar9331.dtsi index 8f5aed760a..768ac0f869 100644 --- a/dts/src/mips/qca/ar9331.dtsi +++ b/dts/src/mips/qca/ar9331.dtsi @@ -59,7 +59,7 @@ #qca,ddr-wb-channel-cells = <1>; }; - uart: uart@18020000 { + uart: serial@18020000 { compatible = "qca,ar9330-uart"; reg = <0x18020000 0x14>; @@ -148,6 +148,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; mdio { @@ -175,7 +176,6 @@ switch_port0: port@0 { reg = <0x0>; - label = "cpu"; ethernet = <ð1>; phy-mode = "gmii"; @@ -183,6 +183,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; }; diff --git a/dts/src/mips/qca/ar9331_dpt_module.dts b/dts/src/mips/qca/ar9331_dpt_module.dts index 0f2b200448..c857cd22f7 100644 --- a/dts/src/mips/qca/ar9331_dpt_module.dts +++ b/dts/src/mips/qca/ar9331_dpt_module.dts @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "ar9331.dtsi" @@ -22,8 +23,9 @@ leds { compatible = "gpio-leds"; - system { - label = "dpt-module:green:system"; + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; }; @@ -31,10 +33,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/qca/ar9331_dragino_ms14.dts b/dts/src/mips/qca/ar9331_dragino_ms14.dts index d38aa73f1a..7affa58d4f 100644 --- a/dts/src/mips/qca/ar9331_dragino_ms14.dts +++ b/dts/src/mips/qca/ar9331_dragino_ms14.dts @@ -22,25 +22,25 @@ leds { compatible = "gpio-leds"; - wlan { + led-wlan { label = "dragino2:red:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - lan { + led-lan { label = "dragino2:red:lan"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; default-state = "off"; }; - wan { + led-wan { label = "dragino2:red:wan"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "off"; }; - system { + led-system { label = "dragino2:red:system"; gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -49,16 +49,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "jumpstart"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/qca/ar9331_omega.dts b/dts/src/mips/qca/ar9331_omega.dts index 11778abacf..8904aa917a 100644 --- a/dts/src/mips/qca/ar9331_omega.dts +++ b/dts/src/mips/qca/ar9331_omega.dts @@ -22,7 +22,7 @@ leds { compatible = "gpio-leds"; - system { + led-system { label = "onion:amber:system"; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -31,10 +31,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/qca/ar9331_openembed_som9331_board.dts b/dts/src/mips/qca/ar9331_openembed_som9331_board.dts new file mode 100644 index 0000000000..dc65ebd60b --- /dev/null +++ b/dts/src/mips/qca/ar9331_openembed_som9331_board.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "ar9331.dtsi" + +/ { + model = "OpenEmbed SOM9331 Board"; + compatible = "openembed,som9331"; + + aliases { + serial0 = &uart; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + /* Winbond 25Q64FVSIG SPI flash */ + spiflash: w25q64@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q64", "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; +}; + +ð1 { + status = "okay"; +}; + +&switch_port1 { + label = "lan0"; + status = "okay"; +}; + +&switch_port3 { + label = "lan1"; + status = "okay"; +}; + +&phy_port0 { + status = "okay"; +}; + +&phy_port2 { + status = "okay"; +}; + +&phy_port4 { + status = "okay"; +}; diff --git a/dts/src/mips/qca/ar9331_tl_mr3020.dts b/dts/src/mips/qca/ar9331_tl_mr3020.dts index c8290d36cf..10b9759228 100644 --- a/dts/src/mips/qca/ar9331_tl_mr3020.dts +++ b/dts/src/mips/qca/ar9331_tl_mr3020.dts @@ -22,25 +22,25 @@ leds { compatible = "gpio-leds"; - wlan { + led-wlan { label = "tp-link:green:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - lan { + led-lan { label = "tp-link:green:lan"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "off"; }; - wps { + led-wps { label = "tp-link:green:wps"; gpios = <&gpio 26 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led3g { + led-led3g { label = "tp-link:green:3g"; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -49,22 +49,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; - button@1 { + button-1 { label = "sw1"; linux,code = <BTN_0>; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "sw2"; linux,code = <BTN_1>; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts index 6069b33cf0..18107ca0a0 100644 --- a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts +++ b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts @@ -26,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ - user_btn1 { + button { label = "USER_BTN1"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code =<KEY_PROG1> ; @@ -47,67 +47,67 @@ * (see below). So we can't include it in this LED node. */ - power_blue { + led-power-blue { label = "smartgw:power:blue"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - power_green { + led-power-green { label = "smartgw:power:green"; gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - power_red { + led-power-red { label = "smartgw:power:red"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_blue { + led-radio-blue { label = "smartgw:radio:blue"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_green { + led-radio-green { label = "smartgw:radio:green"; gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_red { + led-radio-red { label = "smartgw:radio:red"; gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_blue { + led-internet-blue { label = "smartgw:internet:blue"; gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_green { + led-internet-green { label = "smartgw:internet:green"; gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_red { + led-internet-red { label = "smartgw:internet:red"; gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - ethernet_link { + led-ethernet-link { label = "smartgw:eth:link"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "netdev"; }; - ethernet_activity { + led-ethernet-activity { label = "smartgw:eth:act"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; linux,default-trigger = "netdev"; @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts new file mode 100644 index 0000000000..f9c262cc2e --- /dev/null +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc"; + model = "GnuBee GB-PC1"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x1c000000>, + <0x20000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-power { + label = "green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-system { + label = "green:system"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; +}; + +&mmc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + broken-flash-reset; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "ethblack"; + }; + + port@4 { + status = "okay"; + label = "ethblue"; + }; + }; +}; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts new file mode 100644 index 0000000000..b281e13f22 --- /dev/null +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc"; + model = "GnuBee GB-PC2"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x1c000000>, + <0x20000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-ethblack-green { + label = "green:ethblack"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + led-ethblue-green { + label = "green:ethblue"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + led-ethyellow-green { + label = "green:ethyellow"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led-ethyellow-orange { + label = "orange:ethyellow"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led-power { + label = "green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-system { + label = "green:system"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; +}; + +&mmc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + broken-flash-reset; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&gmac1 { + phy-mode = "rgmii-rxid"; + phy-handle = <ðphy5>; + + fixed-link { + status = "disabled"; + }; +}; + +&mdio { + ethphy5: ethernet-phy@5 { + reg = <5>; + }; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "ethblack"; + }; + + port@4 { + status = "okay"; + label = "ethblue"; + }; + + port@5 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/mips/ralink/mt7621-tplink-hc220-g5-v1.dts b/dts/src/mips/ralink/mt7621-tplink-hc220-g5-v1.dts new file mode 100644 index 0000000000..2d2eadc6b9 --- /dev/null +++ b/dts/src/mips/ralink/mt7621-tplink-hc220-g5-v1.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "tplink,hc220-g5-v1", "mediatek,mt7621-soc"; + model = "TP-Link HC220 G5 v1"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "earlycon console=ttyS0,115200"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + key-wps { + label = "wps"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-fault { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_FAULT; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + led-power { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wps { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WPS; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan2"; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@2 { + status = "okay"; + label = "wan"; + }; + }; +}; diff --git a/dts/src/mips/ralink/mt7621.dtsi b/dts/src/mips/ralink/mt7621.dtsi new file mode 100644 index 0000000000..6e95e6f19a --- /dev/null +++ b/dts/src/mips/ralink/mt7621.dtsi @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +#include <dt-bindings/interrupt-controller/mips-gic.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/mt7621-clk.h> +#include <dt-bindings/reset/mt7621-reset.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mediatek,mt7621-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips1004Kc"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "mips,mips1004Kc"; + reg = <1>; + }; + }; + + cpuintc: cpuintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + mmc_fixed_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mmc_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + }; + + mmc_fixed_1v8_io: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "mmc_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + }; + + palmbus: palmbus@1e000000 { + compatible = "palmbus"; + reg = <0x1e000000 0x100000>; + ranges = <0x0 0x1e000000 0x0fffff>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc: syscon@0 { + compatible = "mediatek,mt7621-sysc", "syscon"; + reg = <0x0 0x100>; + #clock-cells = <1>; + #reset-cells = <1>; + ralink,memctl = <&memc>; + clock-output-names = "xtal", "cpu", "bus", + "50m", "125m", "150m", + "250m", "270m"; + }; + + wdt: watchdog@100 { + compatible = "mediatek,mt7621-wdt"; + reg = <0x100 0x100>; + mediatek,sysctl = <&sysc>; + }; + + gpio: gpio@600 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "mediatek,mt7621-gpio"; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 95>; + interrupt-controller; + reg = <0x600 0x100>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>; + }; + + i2c: i2c@900 { + compatible = "mediatek,mt7621-i2c"; + reg = <0x900 0x100>; + + clocks = <&sysc MT7621_CLK_I2C>; + clock-names = "i2c"; + resets = <&sysc MT7621_RST_I2C>; + reset-names = "i2c"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + }; + + memc: memory-controller@5000 { + compatible = "mediatek,mt7621-memc", "syscon"; + reg = <0x5000 0x1000>; + }; + + serial0: serial@c00 { + compatible = "ns16550a"; + reg = <0xc00 0x100>; + + reg-io-width = <4>; + reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART1>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>; + + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + }; + + serial1: serial@d00 { + compatible = "ns16550a"; + reg = <0xd00 0x100>; + + reg-io-width = <4>; + reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART2>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>; + + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "disabled"; + }; + + serial2: serial@e00 { + compatible = "ns16550a"; + reg = <0xe00 0x100>; + + reg-io-width = <4>; + reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART3>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>; + + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + status = "disabled"; + }; + + spi0: spi@b00 { + status = "disabled"; + + compatible = "ralink,mt7621-spi"; + reg = <0xb00 0x100>; + + clocks = <&sysc MT7621_CLK_SPI>; + clock-names = "spi"; + + resets = <&sysc MT7621_RST_SPI>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + }; + }; + + pinctrl: pinctrl { + compatible = "ralink,mt7621-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + + spi_pins: spi0-pins { + pinmux { + groups = "spi"; + function = "spi"; + }; + }; + + uart1_pins: uart1-pins { + pinmux { + groups = "uart1"; + function = "uart1"; + }; + }; + + uart2_pins: uart2-pins { + pinmux { + groups = "uart2"; + function = "uart2"; + }; + }; + + uart3_pins: uart3-pins { + pinmux { + groups = "uart3"; + function = "uart3"; + }; + }; + + rgmii1_pins: rgmii1-pins { + pinmux { + groups = "rgmii1"; + function = "rgmii1"; + }; + }; + + rgmii2_pins: rgmii2-pins { + pinmux { + groups = "rgmii2"; + function = "rgmii2"; + }; + }; + + mdio_pins: mdio0-pins { + pinmux { + groups = "mdio"; + function = "mdio"; + }; + }; + + pcie_pins: pcie0-pins { + pinmux { + groups = "pcie"; + function = "gpio"; + }; + }; + + nand_pins: nand0-pins { + spi-pinmux { + groups = "spi"; + function = "nand1"; + }; + + sdhci-pinmux { + groups = "sdhci"; + function = "nand2"; + }; + }; + + sdhci_pins: sdhci0-pins { + pinmux { + groups = "sdhci"; + function = "sdhci"; + }; + }; + }; + + mmc: mmc@1e130000 { + status = "disabled"; + + compatible = "mediatek,mt7620-mmc"; + reg = <0x1e130000 0x4000>; + + bus-width = <4>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&mmc_fixed_3v3>; + vqmmc-supply = <&mmc_fixed_1v8_io>; + disable-wp; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdhci_pins>; + pinctrl-1 = <&sdhci_pins>; + + clocks = <&sysc MT7621_CLK_SHXC>, + <&sysc MT7621_CLK_50M>; + clock-names = "source", "hclk"; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb: usb@1e1c0000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; + reg = <0x1e1c0000 0x1000 + 0x1e1d0700 0x0100>; + reg-names = "mac", "ippc"; + + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&sysc MT7621_CLK_XTAL>; + clock-names = "sys_ck"; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@1fbc0000 { + compatible = "mti,gic"; + reg = <0x1fbc0000 0x2000>; + + interrupt-controller; + #interrupt-cells = <3>; + + mti,reserved-cpu-vectors = <7>; + + timer { + compatible = "mti,gic-timer"; + interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; + clocks = <&sysc MT7621_CLK_CPU>; + }; + }; + + cpc: cpc@1fbf0000 { + compatible = "mti,mips-cpc"; + reg = <0x1fbf0000 0x8000>; + }; + + cdmm: cdmm@1fbf8000 { + compatible = "mti,mips-cdmm"; + reg = <0x1fbf8000 0x8000>; + }; + + ethernet: ethernet@1e100000 { + compatible = "mediatek,mt7621-eth"; + reg = <0x1e100000 0x10000>; + + clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>; + clock-names = "fe", "ethif"; + + #address-cells = <1>; + #size-cells = <0>; + + resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>; + reset-names = "fe", "eth"; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; + + mediatek,ethsys = <&sysc>; + + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + status = "disabled"; + reg = <0>; + label = "swp0"; + }; + + port@1 { + status = "disabled"; + reg = <1>; + label = "swp1"; + }; + + port@2 { + status = "disabled"; + reg = <2>; + label = "swp2"; + }; + + port@3 { + status = "disabled"; + reg = <3>; + label = "swp3"; + }; + + port@4 { + status = "disabled"; + reg = <4>; + label = "swp4"; + }; + + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + }; + + pcie: pcie@1e140000 { + compatible = "mediatek,mt7621-pci"; + reg = <0x1e140000 0x100>, /* host-pci bridge registers */ + <0x1e142000 0x100>, /* pcie port 0 RC control registers */ + <0x1e143000 0x100>, /* pcie port 1 RC control registers */ + <0x1e144000 0x100>; /* pcie port 2 RC control registers */ + #address-cells = <3>; + #size-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + + device_type = "pci"; + + ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */ + <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0xF800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>; + resets = <&sysc MT7621_RST_PCIE0>; + clocks = <&sysc MT7621_CLK_PCIE0>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy0"; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>; + resets = <&sysc MT7621_RST_PCIE1>; + clocks = <&sysc MT7621_CLK_PCIE1>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy1"; + ranges; + }; + + pcie@2,0 { + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + resets = <&sysc MT7621_RST_PCIE2>; + clocks = <&sysc MT7621_CLK_PCIE2>; + phys = <&pcie2_phy 0>; + phy-names = "pcie-phy2"; + ranges; + }; + }; + + pcie0_phy: pcie-phy@1e149000 { + compatible = "mediatek,mt7621-pci-phy"; + reg = <0x1e149000 0x0700>; + clocks = <&sysc MT7621_CLK_XTAL>; + #phy-cells = <1>; + }; + + pcie2_phy: pcie-phy@1e14a000 { + compatible = "mediatek,mt7621-pci-phy"; + reg = <0x1e14a000 0x0700>; + clocks = <&sysc MT7621_CLK_XTAL>; + #phy-cells = <1>; + }; +}; diff --git a/dts/src/mips/ralink/mt7628a.dtsi b/dts/src/mips/ralink/mt7628a.dtsi index 892e8ab863..45a15e005c 100644 --- a/dts/src/mips/ralink/mt7628a.dtsi +++ b/dts/src/mips/ralink/mt7628a.dtsi @@ -51,85 +51,85 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x1>; - pinmux_gpio_gpio: pinmux_gpio_gpio { + pinmux_gpio_gpio: gpio-gpio-pins { pinctrl-single,bits = <0x0 0x0 0x3>; }; - pinmux_spi_cs1_cs: pinmux_spi_cs1_cs { + pinmux_spi_cs1_cs: spi-cs1-cs-pins { pinctrl-single,bits = <0x0 0x0 0x30>; }; - pinmux_i2s_gpio: pinmux_i2s_gpio { + pinmux_i2s_gpio: i2s-gpio-pins { pinctrl-single,bits = <0x0 0x40 0xc0>; }; - pinmux_uart0_uart: pinmux_uart0_uart0 { + pinmux_uart0_uart: uart0-uart0-pins { pinctrl-single,bits = <0x0 0x0 0x300>; }; - pinmux_sdmode_sdxc: pinmux_sdmode_sdxc { + pinmux_sdmode_sdxc: sdmode-sdxc-pins { pinctrl-single,bits = <0x0 0x0 0xc00>; }; - pinmux_sdmode_gpio: pinmux_sdmode_gpio { + pinmux_sdmode_gpio: sdmode-gpio-pins { pinctrl-single,bits = <0x0 0x400 0xc00>; }; - pinmux_spi_spi: pinmux_spi_spi { + pinmux_spi_spi: spi-spi-pins { pinctrl-single,bits = <0x0 0x0 0x1000>; }; - pinmux_refclk_gpio: pinmux_refclk_gpio { + pinmux_refclk_gpio: refclk-gpio-pins { pinctrl-single,bits = <0x0 0x40000 0x40000>; }; - pinmux_i2c_i2c: pinmux_i2c_i2c { + pinmux_i2c_i2c: i2c-i2c-pins { pinctrl-single,bits = <0x0 0x0 0x300000>; }; - pinmux_uart1_uart: pinmux_uart1_uart1 { + pinmux_uart1_uart: uart1-uart1-pins { pinctrl-single,bits = <0x0 0x0 0x3000000>; }; - pinmux_uart2_uart: pinmux_uart2_uart { + pinmux_uart2_uart: uart2-uart-pins { pinctrl-single,bits = <0x0 0x0 0xc000000>; }; - pinmux_pwm0_pwm: pinmux_pwm0_pwm { + pinmux_pwm0_pwm: pwm0-pwm-pins { pinctrl-single,bits = <0x0 0x0 0x30000000>; }; - pinmux_pwm0_gpio: pinmux_pwm0_gpio { + pinmux_pwm0_gpio: pwm0-gpio-pins { pinctrl-single,bits = <0x0 0x10000000 0x30000000>; }; - pinmux_pwm1_pwm: pinmux_pwm1_pwm { + pinmux_pwm1_pwm: pwm1-pwm-pins { pinctrl-single,bits = <0x0 0x0 0xc0000000>; }; - pinmux_pwm1_gpio: pinmux_pwm1_gpio { + pinmux_pwm1_gpio: pwm1-gpio-pins { pinctrl-single,bits = <0x0 0x40000000 0xc0000000>; }; - pinmux_p0led_an_gpio: pinmux_p0led_an_gpio { + pinmux_p0led_an_gpio: p0led-an-gpio-pins { pinctrl-single,bits = <0x4 0x4 0xc>; }; - pinmux_p1led_an_gpio: pinmux_p1led_an_gpio { + pinmux_p1led_an_gpio: p1led-an-gpio-pins { pinctrl-single,bits = <0x4 0x10 0x30>; }; - pinmux_p2led_an_gpio: pinmux_p2led_an_gpio { + pinmux_p2led_an_gpio: p2led-an-gpio-pins { pinctrl-single,bits = <0x4 0x40 0xc0>; }; - pinmux_p3led_an_gpio: pinmux_p3led_an_gpio { + pinmux_p3led_an_gpio: p3led-an-gpio-pins { pinctrl-single,bits = <0x4 0x100 0x300>; }; - pinmux_p4led_an_gpio: pinmux_p4led_an_gpio { + pinmux_p4led_an_gpio: p4led-an-gpio-pins { pinctrl-single,bits = <0x4 0x400 0xc00>; }; }; @@ -275,7 +275,7 @@ reset-names = "host", "device"; }; - ehci@101c0000 { + usb@101c0000 { compatible = "generic-ehci"; reg = <0x101c0000 0x1000>; diff --git a/dts/src/mips/realtek/cisco_sg220-26.dts b/dts/src/mips/realtek/cisco_sg220-26.dts new file mode 100644 index 0000000000..1cdbb09297 --- /dev/null +++ b/dts/src/mips/realtek/cisco_sg220-26.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause + +/dts-v1/; + +#include "rtl83xx.dtsi" +#include "rtl838x.dtsi" + +/ { + model = "Cisco SG220-26"; + compatible = "cisco,sg220-26", "realtek,rtl8382-soc"; + + chosen { + stdout-path = "serial0:9600n8"; + bootargs = "earlycon console=ttyS0,9600"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/mips/realtek/rtl838x.dtsi b/dts/src/mips/realtek/rtl838x.dtsi new file mode 100644 index 0000000000..6cc4ff5c0d --- /dev/null +++ b/dts/src/mips/realtek/rtl838x.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips4KEc"; + reg = <0>; + clocks = <&baseclk 0>; + clock-names = "cpu"; + }; + }; + + baseclk: baseclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; +}; diff --git a/dts/src/mips/realtek/rtl83xx.dtsi b/dts/src/mips/realtek/rtl83xx.dtsi new file mode 100644 index 0000000000..de65a111b6 --- /dev/null +++ b/dts/src/mips/realtek/rtl83xx.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + cpuintc: cpuintc { + compatible = "mti,cpu-interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000000 0x10000>; + + uart0: uart@2000 { + compatible = "ns16550a"; + reg = <0x2000 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&cpuintc>; + interrupts = <31>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "disabled"; + }; + + uart1: uart@2100 { + compatible = "ns16550a"; + reg = <0x2100 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&cpuintc>; + interrupts = <30>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "disabled"; + }; + }; +}; |