diff options
Diffstat (limited to 'dts/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi')
-rw-r--r-- | dts/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi | 284 |
1 files changed, 284 insertions, 0 deletions
diff --git a/dts/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi b/dts/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi index fa0061eb33..d79f94432b 100644 --- a/dts/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/dts/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi @@ -11,10 +11,14 @@ / { aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; i2c0 = &i2c0; i2c2 = &i2c2; i2c5 = &i2c5; i2c6 = &i2c6; + mmc0 = &mmc0; + mmc1 = &mmc1; serial0 = &uart0; }; @@ -38,6 +42,10 @@ }; }; +&dvp_clk { + clock-frequency = <74250000>; +}; + &gmac0_rgmii_rxin { clock-frequency = <125000000>; }; @@ -54,6 +62,10 @@ clock-frequency = <50000000>; }; +&hdmitx0_pixelclk { + clock-frequency = <297000000>; +}; + &i2srx_bclk_ext { clock-frequency = <12288000>; }; @@ -86,6 +98,38 @@ clock-frequency = <49152000>; }; +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; +}; + &i2c0 { clock-frequency = <100000>; i2c-sda-hold-time-ns = <300>; @@ -123,12 +167,28 @@ #interrupt-cells = <1>; regulators { + vcc_3v3: dcdc1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + }; + vdd_cpu: dcdc2 { regulator-always-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1540000>; regulator-name = "vdd-cpu"; }; + + emmc_vdd: aldo4 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "emmc_vdd"; + }; }; }; }; @@ -143,6 +203,83 @@ status = "okay"; }; +&mmc0 { + max-frequency = <100000000>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + cap-mmc-hw-reset; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; + status = "okay"; +}; + +&mmc1 { + max-frequency = <100000000>; + bus-width = <4>; + no-sdio; + no-mmc; + broken-cd; + cap-sd-highspeed; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "okay"; +}; + +&qspi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nor_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + cdns,read-delay = <5>; + spi-max-frequency = <12000000>; + cdns,tshsl-ns = <1>; + cdns,tsd2d-ns = <1>; + cdns,tchsh-ns = <1>; + cdns,tslch-ns = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + spl@0 { + reg = <0x0 0x80000>; + }; + uboot-env@f0000 { + reg = <0xf0000 0x10000>; + }; + uboot@100000 { + reg = <0x100000 0x400000>; + }; + reserved-data@600000 { + reg = <0x600000 0x1000000>; + }; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi_dev0: spi@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &sysgpio { i2c0_pins: i2c0-0 { i2c-pins { @@ -200,6 +337,109 @@ }; }; + mmc0_pins: mmc0-0 { + rst-pins { + pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <PINMUX(64, 0)>, + <PINMUX(65, 0)>, + <PINMUX(66, 0)>, + <PINMUX(67, 0)>, + <PINMUX(68, 0)>, + <PINMUX(69, 0)>, + <PINMUX(70, 0)>, + <PINMUX(71, 0)>, + <PINMUX(72, 0)>, + <PINMUX(73, 0)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + }; + }; + + mmc1_pins: mmc1-0 { + clk-pins { + pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, + GPOEN_SYS_SDIO1_CMD, + GPI_SYS_SDIO1_CMD)>, + <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, + GPOEN_SYS_SDIO1_DATA0, + GPI_SYS_SDIO1_DATA0)>, + <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, + GPOEN_SYS_SDIO1_DATA1, + GPI_SYS_SDIO1_DATA1)>, + <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, + GPOEN_SYS_SDIO1_DATA2, + GPI_SYS_SDIO1_DATA2)>, + <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, + GPOEN_SYS_SDIO1_DATA3, + GPI_SYS_SDIO1_DATA3)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + spi0_pins: spi0-0 { + mosi-pins { + pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + miso-pins { + pinmux = <GPIOMUX(53, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_SPI0_RXD)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + + sck-pins { + pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, + GPOEN_ENABLE, + GPI_SYS_SPI0_CLK)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + ss-pins { + pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_FSS, + GPOEN_ENABLE, + GPI_SYS_SPI0_FSS)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + uart0_pins: uart0-0 { tx-pins { pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, @@ -223,6 +463,46 @@ slew-rate = <0>; }; }; + + tdm_pins: tdm-0 { + tx-pins { + pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(61, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_RXD)>; + input-enable; + }; + + sync-pins { + pinmux = <GPIOMUX(63, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_SYNC)>; + input-enable; + }; + + pcmclk-pins { + pinmux = <GPIOMUX(38, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_CLK)>; + input-enable; + }; + }; +}; + +&tdm { + pinctrl-names = "default"; + pinctrl-0 = <&tdm_pins>; + status = "okay"; }; &uart0 { @@ -231,6 +511,10 @@ status = "okay"; }; +&usb0 { + dr_mode = "peripheral"; +}; + &U74_1 { cpu-supply = <&vdd_cpu>; }; |