diff options
Diffstat (limited to 'include/configs/ADNPESC1.h')
| -rw-r--r-- | include/configs/ADNPESC1.h | 677 |
1 files changed, 677 insertions, 0 deletions
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h new file mode 100644 index 0000000000..e2dc343273 --- /dev/null +++ b/include/configs/ADNPESC1.h @@ -0,0 +1,677 @@ +/* + * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net> + * Stephan Linz <linz@li-pro.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*********************************************************************** + * Include the whole NIOS CPU configuration. + * + * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!! + * + ***********************************************************************/ + +#if defined(CONFIG_NIOS_BASE_32) +#include <configs/ADNPESC1_base_32.h> +#else +#error *** CFG_ERROR: you have to setup right NIOS CPU configuration +#endif + +/*------------------------------------------------------------------------ + * BOARD/CPU -- TOP-LEVEL + *----------------------------------------------------------------------*/ +#define CONFIG_NIOS 1 /* NIOS-32 core */ +#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */ +#define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */ +#define CFG_HZ 1000 /* 1 msec time tick */ +#undef CFG_CLKS_IN_HZ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ + +/*------------------------------------------------------------------------ + * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_SDRAM_SIZE != 0) + +#define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE +#define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE + +#else +#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config +#endif + +#if defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE) + +#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE +#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE + +#else + +#undef CFG_SRAM_BASE +#undef CFG_SRAM_SIZE + +#endif + +#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION - For the most part, you can put things pretty + * much anywhere. This is pretty flexible for Nios. So here we make some + * arbitrary choices & assume that the monitor is placed at the end of + * a memory resource (so you must make sure TEXT_BASE is chosen + * appropriately -- this is very important if you plan to move your + * memory to another place as configured at this time !!!). + * + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_FLASH_SIZE != 0) + +#define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE +#define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size */ + +#else +#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config +#endif + +/*------------------------------------------------------------------------ + * ENVIRONMENT + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_FLASH_SIZE != 0) + +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ + +/* Mem addr of environment */ +#if defined(CONFIG_NIOS_BASE_32) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +#else +#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR +#endif + +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */ + +#else +#define CFG_ENV_IS_NOWHERE 1 /* NO Environment */ +#endif + +/*------------------------------------------------------------------------ + * NIOS APPLICATION CODE BASE AREA + *----------------------------------------------------------------------*/ +#if ((CFG_ENV_ADDR + CFG_ENV_SIZE) == 0x1050000) +#define CFG_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100" +#define CFG_ADNPESC1_NIOS_APPL_ENTRY "0x1050000" +#define CFG_ADNPESC1_NIOS_APPL_IDENT "0x105000c" +#define CFG_ADNPESC1_NIOS_APPL_END "0x11fffff" +#define CFG_ADNPESC1_FILESYSTEM_BASE "0x1200000" +#define CFG_ADNPESC1_FILESYSTEM_END "0x17fffff" +#else +#error *** CFG_ERROR: missing right appl.code base configuration, expand your config.h +#endif +#define CFG_ADNPESC1_NIOS_IDENTIFIER "Nios" + +/*------------------------------------------------------------------------ + * BOOT ENVIRONMENT + *----------------------------------------------------------------------*/ +#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ +#define CFG_ADNPESC1_SLED_BOOT_OFF "sled boot off; " +#define CFG_ADNPESC1_SLED_RED_BLINK "sled red blink; " +#else +#define CFG_ADNPESC1_SLED_BOOT_OFF +#define CFG_ADNPESC1_SLED_RED_BLINK +#endif + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTCOMMAND \ + "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \ + "then " \ + "wd off; " \ + CFG_ADNPESC1_SLED_BOOT_OFF \ + "go $appl_entry_addr; " \ + "else " \ + CFG_ADNPESC1_SLED_RED_BLINK \ + "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\ + "echo *** invalid application at $appl_entry_addr; " \ + "echo *** stop bootup...; " \ + "fi" + +/*------------------------------------------------------------------------ + * EXTRA ENVIRONMENT + *----------------------------------------------------------------------*/ +#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ +#define CFG_ADNPESC1_SLED_YELLO_ON "sled yellow on; " +#define CFG_ADNPESC1_SLED_YELLO_OFF "sled yellow off; " +#else +#define CFG_ADNPESC1_SLED_YELLO_ON +#define CFG_ADNPESC1_SLED_YELLO_OFF +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "update_allowed=0\0" \ + "update_load_addr=" CFG_ADNPESC1_UPDATE_LOAD_ADDR "\0" \ + "appl_entry_addr=" CFG_ADNPESC1_NIOS_APPL_ENTRY "\0" \ + "appl_end_addr=" CFG_ADNPESC1_NIOS_APPL_END "\0" \ + "appl_ident_addr=" CFG_ADNPESC1_NIOS_APPL_IDENT "\0" \ + "appl_ident_str=" CFG_ADNPESC1_NIOS_IDENTIFIER "\0" \ + "appl_name=ADNPESC1/base32/linux.bin\0" \ + "appl_update=" \ + "if itest.b $update_allowed != 0; " \ + "then " \ + CFG_ADNPESC1_SLED_YELLO_ON \ + "tftp $update_load_addr $appl_name; " \ + "protect off $appl_entry_addr $appl_end_addr; " \ + "era $appl_entry_addr $appl_end_addr; " \ + "cp.b $update_load_addr $appl_entry_addr $filesize; "\ + CFG_ADNPESC1_SLED_YELLO_OFF \ + "else " \ + "echo *** update not allowed (update_allowed=$update_allowed); "\ + "fi\0" \ + "fs_base_addr=" CFG_ADNPESC1_FILESYSTEM_BASE "\0" \ + "fs_end_addr=" CFG_ADNPESC1_FILESYSTEM_END "\0" \ + "fs_name=ADNPESC1/base32/romfs.img\0" \ + "fs_update=" \ + "if itest.b $update_allowed != 0; " \ + "then " \ + CFG_ADNPESC1_SLED_YELLO_ON \ + "tftp $update_load_addr $fs_name; " \ + "protect off $fs_base_addr $fs_end_addr; " \ + "era $fs_base_addr $fs_end_addr; " \ + "cp.b $update_load_addr $fs_base_addr $filesize; "\ + CFG_ADNPESC1_SLED_YELLO_OFF \ + "else " \ + "echo *** update not allowed (update_allowed=$update_allowed); "\ + "fi\0" \ + "uboot_name=ADNPESC1/base32/u-boot.bin\0" \ + "uboot_loadnrun=" \ + "if ping $serverip; " \ + "then " \ + CFG_ADNPESC1_SLED_YELLO_ON \ + "tftp $update_load_addr $uboot_name; " \ + "wd off; " \ + "go $update_load_addr; " \ + "else " \ + "echo *** missing connection to $serverip; " \ + "echo *** check your network and try again...; "\ + "fi\0" + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_UART_NUMS != 0) + +#define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */ + +#if (CFG_NIOS_CPU_UART0_BR != 0) +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR +#else +#undef CFG_NIOS_FIXEDBAUD +#define CONFIG_BAUDRATE 115200 +#endif + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#else +#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config +#endif + +/*------------------------------------------------------------------------ + * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, + * so an avalon bus timer is required. + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER) + +#if (CFG_NIOS_CPU_TICK_TIMER == 0) + +#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */ +#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ + +#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ + +#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ) +#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ) +#else +#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#endif + +#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ + +#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */ + +#if (CFG_HZ <= 1000) +#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#else +#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#endif + +#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) + +#else +#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct +#endif + +#elif (CFG_NIOS_CPU_TICK_TIMER == 1) + +#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */ +#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ + +#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ + +#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ) +#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ) +#else +#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#endif + +#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ + +#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */ + +#if (CFG_HZ <= 1000) +#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#else +#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#endif + +#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) + +#else +#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct +#endif + +#endif /* CFG_NIOS_CPU_TICK_TIMER */ + +#else +#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config +#endif + +/*------------------------------------------------------------------------ + * WATCHDOG (or better MAX823 supervisory circuite access) + *----------------------------------------------------------------------*/ +#define CONFIG_HW_WATCHDOG 1 /* board specific WD */ + +#ifdef CONFIG_HW_WATCHDOG + +/* MAX823 supervisor -- watchdog enable port at: */ +#if (CFG_NIOS_CPU_WDENA_PIO == 0) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 1) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 2) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 3) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 4) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 5) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 6) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 7) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 8) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */ +#elif (CFG_NIOS_CPU_WDENA_PIO == 9) +#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */ +#else +#error *** CFG_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config +#endif + +/* MAX823 supervisor -- watchdog trigger port at: */ +#if (CFG_NIOS_CPU_WDTOG_PIO == 0) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 1) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 2) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 3) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 4) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 5) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 6) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 7) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 8) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */ +#elif (CFG_NIOS_CPU_WDTOG_PIO == 9) +#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */ +#else +#error *** CFG_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config +#endif + +#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */ +#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */ +#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */ +#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/ +#else +#error *** CFG_ERROR: missing watchdog bit configuration, expand your config.h +#endif + +#endif /* CONFIG_HW_WATCHDOG */ + +/*------------------------------------------------------------------------ + * SERIAL PERIPHAREL INTERFACE + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_SPI_NUMS == 1) + +#define CONFIG_NIOS_SPI 1 /* SPI support active */ +#define CFG_NIOS_SPIBASE CFG_NIOS_CPU_SPI0 +#define CFG_NIOS_SPIBITS CFG_NIOS_CPU_SPI0_BITS + +#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */ +#define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */ + +#define __SPI_CMD_OFF 0 /* allow default commands: */ + /* CFG_CMD_SPI */ + /* CFG_CMD_DATE */ + +#else +#undef CONFIG_NIOS_SPI /* NO SPI support */ +#define __SPI_CMD_OFF ( CFG_CMD_SPI \ + | CFG_CMD_DATE \ + ) +#endif + +/*------------------------------------------------------------------------ + * Ethernet -- needs work! + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_LAN_NUMS == 1) + +#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ + +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS) + +#if (CFG_NIOS_CPU_LAN0_BUSW == 32) +#define CONFIG_SMC_USE_32_BIT 1 +#else /* no */ +#undef CONFIG_SMC_USE_32_BIT +#endif + +#elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ + + /********************************************/ + /* !!! CS8900 is __not__ tested on NIOS !!! */ + /********************************************/ +#define CONFIG_DRIVER_CS8900 /* Using CS8900 */ +#define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS) + +#if (CFG_NIOS_CPU_LAN0_BUSW == 32) +#undef CS8900_BUS16 +#define CS8900_BUS32 1 +#else /* no */ +#define CS8900_BUS16 1 +#undef CS8900_BUS32 +#endif + +#else +#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config +#endif + +#define CONFIG_ETHADDR 02:80:ae:20:60:6f +#define CONFIG_NETMASK 255.255.255.248 +#define CONFIG_IPADDR 192.168.161.84 +#define CONFIG_SERVERIP 192.168.161.85 + +#else +#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h +#endif + +/*------------------------------------------------------------------------ + * STATUS LEDs + *----------------------------------------------------------------------*/ +#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO) + +#if (CFG_NIOS_CPU_LED_PIO == 0) + +#define STATUS_LED_BASE CFG_NIOS_CPU_PIO0 +#define STATUS_LED_BITS CFG_NIOS_CPU_PIO0_BITS +#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ + +#if (CFG_NIOS_CPU_PIO0_TYPE == 1) +#define STATUS_LED_WRONLY 1 +#else +#undef STATUS_LED_WRONLY +#endif + +#elif (CFG_NIOS_CPU_LED_PIO == 1) + +#define STATUS_LED_BASE CFG_NIOS_CPU_PIO1 +#define STATUS_LED_BITS CFG_NIOS_CPU_PIO1_BITS +#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ + +#if (CFG_NIOS_CPU_PIO1_TYPE == 1) +#define STATUS_LED_WRONLY 1 +#else +#undef STATUS_LED_WRONLY +#endif + +#elif (CFG_NIOS_CPU_LED_PIO == 2) + +#define STATUS_LED_BASE CFG_NIOS_CPU_PIO2 +#define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS +#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ + +#if (CFG_NIOS_CPU_PIO2_TYPE == 1) +#define STATUS_LED_WRONLY 1 +#else +#undef STATUS_LED_WRONLY +#endif + +#elif (CFG_NIOS_CPU_LED_PIO == 3) + +#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h + +#elif (CFG_NIOS_CPU_LED_PIO == 4) + +#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h + +#elif (CFG_NIOS_CPU_LED_PIO == 5) + +#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h + +#elif (CFG_NIOS_CPU_LED_PIO == 6) + +#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h + +#elif (CFG_NIOS_CPU_LED_PIO == 7) + +#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h + +#elif (CFG_NIOS_CPU_LED_PIO == 8) + +#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h + +#elif (CFG_NIOS_CPU_LED_PIO == 9) + +#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h + +#else +#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case +#endif + +#define CONFIG_STATUS_LED 1 /* enable status led driver */ + +#define STATUS_LED_BIT (1 << 0) /* LED[0] */ +#define STATUS_LED_STATE STATUS_LED_BLINKING +#define STATUS_LED_BOOT_STATE STATUS_LED_OFF +#define STATUS_LED_PERIOD (CFG_HZ / 2) /* ca. 1 Hz */ +#define STATUS_LED_BOOT 0 /* boot LED */ + +#if (STATUS_LED_BITS > 1) +#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CFG_HZ / 10) /* ca. 5 Hz */ +#define STATUS_LED_RED 1 /* fail LED */ +#endif + +#if (STATUS_LED_BITS > 2) +#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_PERIOD2 (CFG_HZ / 2) /* ca. 1 Hz */ +#define STATUS_LED_YELLOW 2 /* info LED */ +#endif + +#if (STATUS_LED_BITS > 3) +#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ +#define STATUS_LED_STATE3 STATUS_LED_OFF +#define STATUS_LED_PERIOD3 (CFG_HZ / 2) /* ca. 1 Hz */ +#define STATUS_LED_GREEN 3 /* info LED */ +#endif + +#define STATUS_LED_PAR 1 /* makes status_led.h happy */ + +#endif /* CFG_NIOS_CPU_PIO_NUMS */ + +/*------------------------------------------------------------------------ + * Diagnostics / Power On Self Tests + *----------------------------------------------------------------------*/ +#define CONFIG_POST CFG_POST_RTC +#define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ + CFG_CMD_ASKENV | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_BMP | \ + CFG_CMD_CACHE | \ + CFG_CMD_DOC | \ + CFG_CMD_DTT | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_FDC | \ + CFG_CMD_FDOS | \ + CFG_CMD_HWFLOW | \ + CFG_CMD_IDE | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_KGDB | \ + CFG_CMD_NAND | \ + CFG_CMD_NFS | \ + CFG_CMD_MMC | \ + CFG_CMD_MII | \ + CFG_CMD_PCI | \ + CFG_CMD_PCMCIA | \ + CFG_CMD_SCSI | \ + CFG_CMD_VFD | \ + CFG_CMD_USB | \ + __SPI_CMD_OFF ) ) + + +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * KGDB + *----------------------------------------------------------------------*/ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 9600 +#endif + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_HUSH_PARSER 1 /* use "hush" command parser + undef to save memory */ +#define CFG_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 64 /* max number of command args*/ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "[]> " +#endif + +/* Default load address */ +#if (CFG_SRAM_SIZE != 0) + +/* default in SRAM */ +#define CFG_LOAD_ADDR CFG_SRAM_BASE + +#elif (CFG_SDRAM_SIZE != 0) + +/* default in SDRAM */ +#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE) +#if 1 +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE) +#else +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x400000) +#endif +#else +#define CFG_LOAD_ADDR CFG_SDRAM_BASE +#endif + +#else +#undef CFG_LOAD_ADDR /* force error break */ +#endif + + +/* MEM test area */ +#if (CFG_SDRAM_SIZE != 0) + +/* SDRAM begin to stack area (1MB stack) */ +#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE) +#if 0 +#define CFG_MEMTEST_START (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE) +#else +#define CFG_MEMTEST_START (CFG_SDRAM_BASE + 0x400000) +#endif +#else +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#endif + +#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) +#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) + +#else +#undef CFG_MEMTEST_START /* force error break */ +#undef CFG_MEMTEST_END +#endif + + +#endif /* __CONFIG_H */ |