diff options
Diffstat (limited to 'include/configs/CPCI750.h')
| -rw-r--r-- | include/configs/CPCI750.h | 218 |
1 files changed, 109 insertions, 109 deletions
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 1632f374c3..244e45a750 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -57,7 +57,7 @@ #define CONFIG_CPCI750 1 /* this is an CPCI750 board */ -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ +#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ #undef CONFIG_ECC /* enable ECC support */ @@ -84,19 +84,19 @@ * for your console driver. * * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial + * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial * cable onto the second DUART channel, change the CFG_DUART port from 1 * to 0 below. * * to use the MPSC, #define CONFIG_MPSC. If you have wired up another * mpsc channel, change CONFIG_MPSC_PORT to the desired value. */ -#define CONFIG_MPSC +#define CONFIG_MPSC #define CONFIG_MPSC_PORT 0 /* to change the default ethernet port, use this define (options: 0, 1, 2) */ #define CONFIG_NET_MULTI -#define MV_ETH_DEVS 1 +#define MV_ETH_DEVS 1 #define CONFIG_ETHER_PORT 0 #undef CONFIG_ETHER_PORT_MII /* use RMII */ @@ -118,38 +118,38 @@ #define CONFIG_SERIAL "AA000001" #define CONFIG_SERVERIP "10.0.0.79" -#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" +#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" #define CONFIG_TESTDRAMDATA y -#define CONFIG_TESTDRAMADDRESS n +#define CONFIG_TESTDRAMADDRESS n #define CONFIG_TESETDRAMWALK n /* ----------------------------------------------------------------------------- */ -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ +#undef CONFIG_ALTIVEC /* undef to disable */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ + | CFG_CMD_I2C \ | CFG_CMD_CACHE \ | CFG_CMD_EEPROM \ - | CFG_CMD_PCI \ + | CFG_CMD_PCI \ | CFG_CMD_ELF \ | CFG_CMD_DATE \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_IDE \ - | CFG_CMD_FAT \ - | CFG_CMD_EXT2 \ + | CFG_CMD_NET \ + | CFG_CMD_PING \ + | CFG_CMD_IDE \ + | CFG_CMD_FAT \ + | CFG_CMD_EXT2 \ ) #define CONFIG_DOS_PARTITION @@ -159,7 +159,7 @@ #define CONFIG_USE_CPCIDVI -#ifdef CONFIG_USE_CPCIDVI +#ifdef CONFIG_USE_CPCIDVI #define CONFIG_VIDEO #define CONFIG_VIDEO_CT69000 #define CONFIG_CFB_CONSOLE @@ -174,23 +174,23 @@ */ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_SPEED 80000 /* I2C speed default */ +#define CFG_I2C_SPEED 80000 /* I2C speed default */ #define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ /*#define CFG_MEMTEST_START 0x00400000*/ /* memtest works on */ /*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ +/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ /* #define CFG_DRAM_TEST @@ -198,21 +198,21 @@ * CFG_DRAM_TEST - enables the following tests. * * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. + * Environment variable 'test_dram_data' must be + * set to 'y'. * CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. + * addressable. Environment variable + * 'test_dram_address' must be set to 'y'. * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. + * This test takes about 6 minutes to test 64 MB. + * Environment variable 'test_dram_walk' must be + * set to 'y'. */ #define CFG_DRAM_TEST #if defined(CFG_DRAM_TEST) #define CFG_MEMTEST_START 0x00400000 /* memtest works on */ /*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ +#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ #define CFG_DRAM_TEST_DATA #define CFG_DRAM_TEST_ADDRESS #define CFG_DRAM_TEST_WALK @@ -221,10 +221,10 @@ #define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ #undef CFG_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ -#define CFG_LOAD_ADDR 0x00300000 /* default load address */ +#define CFG_LOAD_ADDR 0x00300000 /* default load address */ -#define CFG_HZ 1000 /* decr freq: 1ms ticks */ -#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ +#define CFG_HZ 1000 /* decr freq: 1ms ticks */ +#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ #define CFG_BUS_CLK CFG_BUS_HZ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } @@ -251,7 +251,7 @@ * To an unused memory region. The stack will remain in cache until RAM * is initialized */ -#undef CFG_INIT_RAM_LOCK +#undef CFG_INIT_RAM_LOCK /* #define CFG_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ /* #define CFG_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ #define CFG_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ @@ -261,7 +261,7 @@ #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR -/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/ +/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/ #define CFG_INTERNAL_RAM_ADDR 0xf1080000 #endif @@ -270,16 +270,16 @@ * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE 0x00000000 /* Dummies for BAT 4-7 */ -#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CFG_SDRAM2_BASE 0x20000000 -#define CFG_SDRAM3_BASE 0x30000000 -#define CFG_SDRAM4_BASE 0x40000000 +#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#define CFG_SDRAM2_BASE 0x20000000 +#define CFG_SDRAM3_BASE 0x30000000 +#define CFG_SDRAM4_BASE 0x40000000 #define CFG_RESET_ADDRESS 0xfff00100 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE 0xfff00000 -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ /*----------------------------------------------------------------------- * FLASH related @@ -289,15 +289,15 @@ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ #define CFG_FLASH_PROTECTION 1 /* use hardware protection */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */ +#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */ #define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ -#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \ - CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \ - CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \ - CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT } -#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ +#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \ + CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \ + CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \ + CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT } +#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ /* areas to map different things with the GT in physical space */ #define CFG_DRAM_BANKS 4 @@ -308,20 +308,20 @@ /* Peripheral Device section */ /*******************************************************/ -/* We have on the cpci750 Board : */ -/* GT-Chipset Register Area */ -/* GT-Chipset internal SRAM 256k */ -/* SRAM on external device module */ -/* Real time clock on external device module */ -/* dobble UART on external device module */ -/* Data flash on external device module */ -/* Boot flash on external device module */ +/* We have on the cpci750 Board : */ +/* GT-Chipset Register Area */ +/* GT-Chipset internal SRAM 256k */ +/* SRAM on external device module */ +/* Real time clock on external device module */ +/* dobble UART on external device module */ +/* Data flash on external device module */ +/* Boot flash on external device module */ /*******************************************************/ #define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ +#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ -#undef MARVEL_STANDARD_CFG -#ifndef MARVEL_STANDARD_CFG +#undef MARVEL_STANDARD_CFG +#ifndef MARVEL_STANDARD_CFG /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ #define CFG_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ /*#define CFG_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ @@ -333,11 +333,11 @@ #define CFG_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ #define CFG_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ -#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */ -#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */ -#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */ -#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */ -#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */ +#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */ +#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */ +#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */ +#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */ +#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */ /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ #endif @@ -346,22 +346,22 @@ #define CFG_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ #define CFG_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ #define CFG_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ +#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ #define CFG_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ + /* c 4 a 8 2 4 1 c */ + /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ /* MPP Control MV64360 Appendix P P. 632*/ -#define CFG_MPP_CONTROL_0 0x00002222 /* */ -#define CFG_MPP_CONTROL_1 0x11110000 /* */ -#define CFG_MPP_CONTROL_2 0x11111111 /* */ -#define CFG_MPP_CONTROL_3 0x00001111 /* */ -/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */ +#define CFG_MPP_CONTROL_0 0x00002222 /* */ +#define CFG_MPP_CONTROL_1 0x11110000 /* */ +#define CFG_MPP_CONTROL_2 0x11111111 /* */ +#define CFG_MPP_CONTROL_3 0x00001111 /* */ +/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */ #define CFG_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ @@ -378,12 +378,12 @@ ECC disable non registered DRAM */ /* 31:26 25:22 21:20 19 18 17 16 */ - /* 100001 0000 010 0 0 0 0 */ + /* 100001 0000 010 0 0 0 0 */ /* refresh_count=0x400 phisical interleaving disable virtual interleaving enable */ /* 15 14 13:0 */ - /* 0 1 0x400 */ + /* 0 1 0x400 */ # define CFG_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ @@ -392,14 +392,14 @@ *----------------------------------------------------------------------- */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ /* PCI MEMORY MAP section */ #define CFG_PCI0_MEM_BASE 0x80000000 @@ -433,21 +433,21 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#define CONFIG_IDE_RESET /* no reset for ide supported */ -#define CONFIG_IDE_PREINIT /* check for units */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#define CONFIG_IDE_RESET /* no reset for ide supported */ +#define CONFIG_IDE_PREINIT /* check for units */ -#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ +#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR 0 -#define CFG_ATA_IDE0_OFFSET 0 -#define CFG_ATA_IDE1_OFFSET 0 +#define CFG_ATA_BASE_ADDR 0 +#define CFG_ATA_IDE0_OFFSET 0 +#define CFG_ATA_IDE1_OFFSET 0 -#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ /*---------------------------------------------------------------------- @@ -551,7 +551,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization @@ -563,23 +563,23 @@ #define CFG_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ #if 0 -#define CFG_ENV_IS_IN_FLASH 0 -#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CFG_ENV_IS_IN_FLASH 0 +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x10000 #define CFG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */ +/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */ #endif #define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_EEPROM_ADDR 0x050 +#define CFG_I2C_EEPROM_ADDR 0x050 #define CFG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */ #define CFG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/ #define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ #define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40) +#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40) /*----------------------------------------------------------------------- * Cache Configuration @@ -601,7 +601,7 @@ #if defined (CONFIG_750CX) || defined (CONFIG_750FX) #define L2_INIT 0 #else -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ +#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) #endif @@ -612,9 +612,9 @@ * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_BOARD_ASM_INIT 1 +#define CFG_BOARD_ASM_INIT 1 #endif /* __CONFIG_H */ |