diff options
Diffstat (limited to 'include/linux/mtd/nand.h')
-rw-r--r-- | include/linux/mtd/nand.h | 645 |
1 files changed, 369 insertions, 276 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index e5cfed92b0..74ea0b4e02 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1,11 +1,9 @@ /* * linux/include/linux/mtd/nand.h * - * Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org> - * Steven J. Hill <sjhill@realitydiluted.com> - * Thomas Gleixner <tglx@linutronix.de> - * - * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $ + * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> + * Steven J. Hill <sjhill@realitydiluted.com> + * Thomas Gleixner <tglx@linutronix.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -20,34 +18,43 @@ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H -#ifndef DOXYGEN_SHOULD_SKIP_THIS - #include <linux/mtd/mtd.h> - -/* The maximum number of NAND chips in an array */ -#define NAND_MAX_CHIPS 8 - +#include <linux/mtd/flashchip.h> #include <linux/mtd/bbm.h> struct mtd_info; +struct nand_flash_dev; /* Scan and identify a NAND device */ -extern int nand_scan (struct mtd_info *mtd, int max_chips); -/* Separate phases of nand_scan(), allowing board driver to intervene - * and override command or ECC setup according to flash type */ -extern int nand_scan_ident(struct mtd_info *mtd, int max_chips); +extern int nand_scan(struct mtd_info *mtd, int max_chips); +/* + * Separate phases of nand_scan(), allowing board driver to intervene + * and override command or ECC setup according to flash type. + */ +extern int nand_scan_ident(struct mtd_info *mtd, int max_chips, + struct nand_flash_dev *table); extern int nand_scan_tail(struct mtd_info *mtd); /* Free resources held by the NAND device */ -extern void nand_release (struct mtd_info *mtd); +extern void nand_release(struct mtd_info *mtd); /* Internal helper for board drivers which need to override command function */ extern void nand_wait_ready(struct mtd_info *mtd); -/* This constant declares the max. oobsize / page, which +/* locks all blocks present in the device */ +extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); + +/* unlocks specified locked blocks */ +extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); + +/* The maximum number of NAND chips in an array */ +#define NAND_MAX_CHIPS 8 + +/* + * This constant declares the max. oobsize / page, which * is supported now. If you add a chip with bigger oobsize/page * adjust this accordingly. */ -#define NAND_MAX_OOBSIZE 576 +#define NAND_MAX_OOBSIZE 640 #define NAND_MAX_PAGESIZE 8192 /* @@ -77,38 +84,24 @@ extern void nand_wait_ready(struct mtd_info *mtd); #define NAND_CMD_READOOB 0x50 #define NAND_CMD_ERASE1 0x60 #define NAND_CMD_STATUS 0x70 -#define NAND_CMD_STATUS_MULTI 0x71 #define NAND_CMD_SEQIN 0x80 #define NAND_CMD_RNDIN 0x85 #define NAND_CMD_READID 0x90 #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_PARAM 0xec +#define NAND_CMD_GET_FEATURES 0xee +#define NAND_CMD_SET_FEATURES 0xef #define NAND_CMD_RESET 0xff +#define NAND_CMD_LOCK 0x2a +#define NAND_CMD_UNLOCK1 0x23 +#define NAND_CMD_UNLOCK2 0x24 + /* Extended commands for large page devices */ #define NAND_CMD_READSTART 0x30 #define NAND_CMD_RNDOUTSTART 0xE0 #define NAND_CMD_CACHEDPROG 0x15 -/* Extended commands for AG-AND device */ -/* - * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but - * there is no way to distinguish that from NAND_CMD_READ0 - * until the remaining sequence of commands has been completed - * so add a high order bit and mask it off in the command. - */ -#define NAND_CMD_DEPLETE1 0x100 -#define NAND_CMD_DEPLETE2 0x38 -#define NAND_CMD_STATUS_MULTI 0x71 -#define NAND_CMD_STATUS_ERROR 0x72 -/* multi-bank error status (banks 0-3) */ -#define NAND_CMD_STATUS_ERROR0 0x73 -#define NAND_CMD_STATUS_ERROR1 0x74 -#define NAND_CMD_STATUS_ERROR2 0x75 -#define NAND_CMD_STATUS_ERROR3 0x76 -#define NAND_CMD_STATUS_RESET 0x7f -#define NAND_CMD_STATUS_CLEAR 0xff - #define NAND_CMD_NONE -1 /* Status bits */ @@ -126,6 +119,8 @@ typedef enum { NAND_ECC_SOFT, NAND_ECC_HW, NAND_ECC_HW_SYNDROME, + NAND_ECC_HW_OOB_FIRST, + NAND_ECC_SOFT_BCH, } nand_ecc_modes_t; /* @@ -135,65 +130,65 @@ typedef enum { #define NAND_ECC_READ 0 /* Reset Hardware ECC for write */ #define NAND_ECC_WRITE 1 -/* Enable Hardware ECC before syndrom is read back from flash */ +/* Enable Hardware ECC before syndrome is read back from flash */ #define NAND_ECC_READSYN 2 /* Bit mask for flags passed to do_nand_read_ecc */ #define NAND_GET_DEVICE 0x80 -/* Option constants for bizarre disfunctionality and real -* features -*/ -/* Chip can not auto increment pages */ -#define NAND_NO_AUTOINCR 0x00000001 -/* Buswitdh is 16 bit */ +/* + * Option constants for bizarre disfunctionality and real + * features. + */ +/* Buswidth is 16 bit */ #define NAND_BUSWIDTH_16 0x00000002 -/* Device supports partial programming without padding */ -#define NAND_NO_PADDING 0x00000004 /* Chip has cache program function */ #define NAND_CACHEPRG 0x00000008 -/* Chip has copy back function */ -#define NAND_COPYBACK 0x00000010 -/* AND Chip which has 4 banks and a confusing page / block - * assignment. See Renesas datasheet for further information */ -#define NAND_IS_AND 0x00000020 -/* Chip has a array of 4 pages which can be read without - * additional ready /busy waits */ -#define NAND_4PAGE_ARRAY 0x00000040 -/* Chip requires that BBT is periodically rewritten to prevent - * bits from adjacent blocks from 'leaking' in altering data. - * This happens with the Renesas AG-AND chips, possibly others. */ -#define BBT_AUTO_REFRESH 0x00000080 -/* Chip does not require ready check on read. True - * for all large page devices, as they do not support - * autoincrement.*/ -#define NAND_NO_READRDY 0x00000100 +/* + * Chip requires ready check on read (for auto-incremented sequential read). + * True only for small page devices; large page devices do not support + * autoincrement. + */ +#define NAND_NEED_READRDY 0x00000100 + /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 -/* Buswitdh shal be autodetected */ -#define NAND_BUSWIDTH_AUTO 0x00080000 +/* Device is one of 'new' xD cards that expose fake nand command set */ +#define NAND_BROKEN_XD 0x00000400 + +/* Device behaves just like nand, but is readonly */ +#define NAND_ROM 0x00000800 + +/* Device supports subpage reads */ +#define NAND_SUBPAGE_READ 0x00001000 /* Options valid for Samsung large page devices */ -#define NAND_SAMSUNG_LP_OPTIONS \ - (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) +#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG /* Macros to identify the above */ -#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) -#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) -#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) - -/* Mask to zero out the chip options, which come from the id table */ -#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) +#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) /* Non chip related options */ /* This option skips the bbt scan during initialization. */ -#define NAND_SKIP_BBTSCAN 0x00020000 -/* This option is defined if the board driver allocates its own buffers - (e.g. because it needs them DMA-coherent */ -#define NAND_OWN_BUFFERS 0x00040000 +#define NAND_SKIP_BBTSCAN 0x00010000 +/* + * This option is defined if the board driver allocates its own buffers + * (e.g. because it needs them DMA-coherent). + */ +#define NAND_OWN_BUFFERS 0x00020000 +/* Chip may not exist, so silence any errors in scan */ +#define NAND_SCAN_SILENT_NODEV 0x00040000 +/* + * Autodetect nand buswidth with readid/onfi. + * This suppose the driver will configure the hardware in 8 bits mode + * when calling nand_scan_ident, and update its configuration + * before calling nand_scan_tail. + */ +#define NAND_BUSWIDTH_AUTO 0x00080000 + /* Options set by nand scan */ /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 @@ -202,23 +197,24 @@ typedef enum { #define NAND_CI_CHIPNR_MSK 0x03 #define NAND_CI_CELLTYPE_MSK 0x0C -/* - * nand_state_t - chip states - * Enumeration for NAND flash chip state - */ -typedef enum { - FL_READY, - FL_READING, - FL_WRITING, - FL_ERASING, - FL_SYNCING, - FL_CACHEDPRG, - FL_PM_SUSPENDED, -} nand_state_t; - /* Keep gcc happy */ struct nand_chip; +/* ONFI timing mode, used in both asynchronous and synchronous mode */ +#define ONFI_TIMING_MODE_0 (1 << 0) +#define ONFI_TIMING_MODE_1 (1 << 1) +#define ONFI_TIMING_MODE_2 (1 << 2) +#define ONFI_TIMING_MODE_3 (1 << 3) +#define ONFI_TIMING_MODE_4 (1 << 4) +#define ONFI_TIMING_MODE_5 (1 << 5) +#define ONFI_TIMING_MODE_UNKNOWN (1 << 6) + +/* ONFI feature address */ +#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1 + +/* ONFI subfeature parameters length */ +#define ONFI_SUBFEATURE_PARAM_LEN 4 + struct nand_onfi_params { /* rev info and features block */ /* 'O' 'N' 'F' 'I' */ @@ -287,77 +283,87 @@ struct nand_onfi_params { * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices * @lock: protection lock * @active: the mtd device which holds the controller currently - * @wq: wait queue to sleep on if a NAND operation is in progress - * used instead of the per chip wait queue when a hw controller is available + * @wq: wait queue to sleep on if a NAND operation is in + * progress used instead of the per chip wait queue + * when a hw controller is available. */ struct nand_hw_control { struct nand_chip *active; }; /** - * struct nand_ecc_ctrl - Control structure for ecc - * @mode: ecc mode - * @steps: number of ecc steps per page - * @size: data bytes per ecc step - * @bytes: ecc bytes per step + * struct nand_ecc_ctrl - Control structure for ECC + * @mode: ECC mode + * @steps: number of ECC steps per page + * @size: data bytes per ECC step + * @bytes: ECC bytes per step * @strength: max number of correctible bits per ECC step - * @total: total number of ecc bytes per page - * @prepad: padding information for syndrome based ecc generators - * @postpad: padding information for syndrome based ecc generators + * @total: total number of ECC bytes per page + * @prepad: padding information for syndrome based ECC generators + * @postpad: padding information for syndrome based ECC generators * @layout: ECC layout control struct pointer - * @hwctl: function to control hardware ecc generator. Must only + * @priv: pointer to private ECC control data + * @hwctl: function to control hardware ECC generator. Must only * be provided if an hardware ECC is available - * @calculate: function for ecc calculation or readback from ecc hardware - * @correct: function for ecc correction, matching to ecc generator (sw/hw) + * @calculate: function for ECC calculation or readback from ECC hardware + * @correct: function for ECC correction, matching to ECC generator (sw/hw) * @read_page_raw: function to read a raw page without ECC * @write_page_raw: function to write a raw page without ECC - * @read_page: function to read a page according to the ecc generator requirements - * @write_page: function to write a page according to the ecc generator requirements + * @read_page: function to read a page according to the ECC generator + * requirements; returns maximum number of bitflips corrected in + * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error + * @read_subpage: function to read parts of the page covered by ECC; + * returns same as read_page() + * @write_subpage: function to write parts of the page covered by ECC. + * @write_page: function to write a page according to the ECC generator + * requirements. + * @write_oob_raw: function to write chip OOB data without ECC + * @read_oob_raw: function to read chip OOB data without ECC * @read_oob: function to read chip OOB data * @write_oob: function to write chip OOB data */ struct nand_ecc_ctrl { - nand_ecc_modes_t mode; - int steps; - int size; - int bytes; - int total; - int strength; - int prepad; - int postpad; + nand_ecc_modes_t mode; + int steps; + int size; + int bytes; + int total; + int strength; + int prepad; + int postpad; struct nand_ecclayout *layout; - void (*hwctl)(struct mtd_info *mtd, int mode); - int (*calculate)(struct mtd_info *mtd, - const uint8_t *dat, - uint8_t *ecc_code); - int (*correct)(struct mtd_info *mtd, uint8_t *dat, - uint8_t *read_ecc, - uint8_t *calc_ecc); - int (*read_page_raw)(struct mtd_info *mtd, - struct nand_chip *chip, - uint8_t *buf); - void (*write_page_raw)(struct mtd_info *mtd, - struct nand_chip *chip, - const uint8_t *buf); - int (*read_page)(struct mtd_info *mtd, - struct nand_chip *chip, - uint8_t *buf); - void (*write_page)(struct mtd_info *mtd, - struct nand_chip *chip, - const uint8_t *buf); - int (*read_oob)(struct mtd_info *mtd, - struct nand_chip *chip, - int page, - int sndcmd); - int (*write_oob)(struct mtd_info *mtd, - struct nand_chip *chip, - int page); + void *priv; + void (*hwctl)(struct mtd_info *mtd, int mode); + int (*calculate)(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code); + int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, + uint8_t *calc_ecc); + int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page); + int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); + int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page); + int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offs, uint32_t len, uint8_t *buf); + int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, uint32_t data_len, + const uint8_t *data_buf, int oob_required); + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); + int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); + int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip, + int page); }; /** * struct nand_buffers - buffer structure for read/write - * @ecccalc: buffer for calculated ecc - * @ecccode: buffer for ecc read from flash + * @ecccalc: buffer for calculated ECC + * @ecccode: buffer for ECC read from flash * @databuf: buffer for data - dynamically sized * * Do not change the order of buffers. databuf and oobrbuf must be in @@ -371,168 +377,234 @@ struct nand_buffers { /** * struct nand_chip - NAND Private Flash Chip Data - * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device - * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the + * flash device + * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the + * flash device. * @read_byte: [REPLACEABLE] read one byte from the chip * @read_word: [REPLACEABLE] read one word from the chip * @write_buf: [REPLACEABLE] write data from the buffer to the chip * @read_buf: [REPLACEABLE] read data from the chip into the buffer - * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data * @select_chip: [REPLACEABLE] select chip nr * @block_bad: [REPLACEABLE] check, if the block is bad * @block_markbad: [REPLACEABLE] mark the block bad * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling * ALE/CLE/nCE. Also used to write command and address - * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line - * If set to NULL no access to ready/busy is available and the ready/busy information - * is read from the chip status register - * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip - * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready - * @ecc: [BOARDSPECIFIC] ecc control ctructure + * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting + * mtd->oobsize, mtd->writesize and so on. + * @id_data contains the 8 bytes values of NAND_CMD_READID. + * Return with the bus width. + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing + * device ready/busy line. If set to NULL no access to + * ready/busy is available and the ready/busy information + * is read from the chip status register. + * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing + * commands to the chip. + * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on + * ready. + * @ecc: [BOARDSPECIFIC] ECC control structure * @buffers: buffer structure for read/write * @hwcontrol: platform-specific hardware control structure - * @ops: oob operation operands - * @erase_cmd: [INTERN] erase command write function, selectable due to AND support + * @erase_cmd: [INTERN] erase command write function, selectable due + * to AND support. * @scan_bbt: [REPLACEABLE] function to scan bad block table - * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) - * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring + * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device - * @oob_poi: poison value buffer - * @page_shift: [INTERN] number of address bits in a page (column address bits) + * @oob_poi: "poison value buffer," used for laying out OOB data + * before writing + * @page_shift: [INTERN] number of address bits in a page (column + * address bits). * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry * @chip_shift: [INTERN] number of address bits in one chip - * @datbuf: [INTERN] internal buffer for one page + oob - * @oobbuf: [INTERN] oob buffer for one eraseblock - * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized - * @data_poi: [INTERN] pointer to a data buffer - * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about - * special functionality. See the defines for further explanation + * @options: [BOARDSPECIFIC] various chip options. They can partly + * be set to inform nand_scan about special functionality. + * See the defines for further explanation. * @bbt_options: [INTERN] bad block specific options. All options used * here must come from bbm.h. By default, these options * will be copied to the appropriate nand_bbt_descr's. - * @badblockpos: [INTERN] position of the bad block marker in the oob area + * @badblockpos: [INTERN] position of the bad block marker in the oob + * area. + * @badblockbits: [INTERN] minimum number of set bits in a good block's + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 * @cellinfo: [INTERN] MLC/multichip data from chip ident * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 - * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf + * @pagebuf: [INTERN] holds the pagenumber which is currently in + * data_buf. + * @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is + * currently in data_buf. * @subpagesize: [INTERN] holds the subpagesize * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded), * non 0 if ONFI supported. * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is * supported, 0 otherwise. - * @ecclayout: [REPLACEABLE] the default ecc placement scheme + * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand + * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand + * @ecclayout: [REPLACEABLE] the default ECC placement scheme * @bbt: [INTERN] bad block table pointer - * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup + * @bbt_td: [REPLACEABLE] bad block table descriptor for flash + * lookup. * @bbt_md: [REPLACEABLE] bad block table mirror descriptor - * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan - * @controller: [REPLACEABLE] a pointer to a hardware controller structure - * which is shared among multiple independend devices - * @priv: [OPTIONAL] pointer to private chip date - * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks - * (determine if errors are correctable) + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial + * bad block scan. + * @controller: [REPLACEABLE] a pointer to a hardware controller + * structure which is shared among multiple independent + * devices. + * @priv: [OPTIONAL] pointer to private chip data + * @errstat: [OPTIONAL] hardware specific function to perform + * additional error status checks (determine if errors are + * correctable). * @write_page: [REPLACEABLE] High-level page write function */ -struct nand_chip { - void __iomem *IO_ADDR_R; - void __iomem *IO_ADDR_W; - - uint8_t (*read_byte)(struct mtd_info *mtd); - u16 (*read_word)(struct mtd_info *mtd); - void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); - void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); - int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); - void (*select_chip)(struct mtd_info *mtd, int chip); - int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); - int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); - void (*cmd_ctrl)(struct mtd_info *mtd, int dat, - unsigned int ctrl); - int (*dev_ready)(struct mtd_info *mtd); - void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); - int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); - void (*erase_cmd)(struct mtd_info *mtd, int page); - int (*scan_bbt)(struct mtd_info *mtd); - int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); - int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw); - int (*set_buswidth)(struct mtd_info *mtd, struct nand_chip *this, int buswidth); - - int chip_delay; - unsigned int options; - unsigned int bbt_options; - - int page_shift; - int phys_erase_shift; - int bbt_erase_shift; - int chip_shift; - int numchips; - uint64_t chipsize; - int pagemask; - int pagebuf; - int subpagesize; - uint8_t cellinfo; - int badblockpos; +struct nand_chip { + void __iomem *IO_ADDR_R; + void __iomem *IO_ADDR_W; + + uint8_t (*read_byte)(struct mtd_info *mtd); + u16 (*read_word)(struct mtd_info *mtd); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + void (*select_chip)(struct mtd_info *mtd, int chip); + int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); + int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); + void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + int (*init_size)(struct mtd_info *mtd, struct nand_chip *this, + u8 *id_data); + int (*dev_ready)(struct mtd_info *mtd); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, + int page_addr); + int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); + void (*erase_cmd)(struct mtd_info *mtd, int page); + int (*scan_bbt)(struct mtd_info *mtd); + int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, + int status, int page); + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, int data_len, const uint8_t *buf, + int oob_required, int page, int cached, int raw); + int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + + int chip_delay; + unsigned int options; + unsigned int bbt_options; + + int page_shift; + int phys_erase_shift; + int bbt_erase_shift; + int chip_shift; + int numchips; + uint64_t chipsize; + int pagemask; + int pagebuf; + unsigned int pagebuf_bitflips; + int subpagesize; + uint8_t cellinfo; + int badblockpos; + int badblockbits; int onfi_version; - struct nand_onfi_params onfi_params; + struct nand_onfi_params onfi_params; - nand_state_t state; + flstate_t state; - uint8_t *oob_poi; - struct nand_hw_control *controller; - struct nand_ecclayout *ecclayout; + uint8_t *oob_poi; + struct nand_hw_control *controller; + struct nand_ecclayout *ecclayout; struct nand_ecc_ctrl ecc; struct nand_buffers *buffers; struct nand_hw_control hwcontrol; - struct mtd_oob_ops ops; - - uint8_t *bbt; - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; + uint8_t *bbt; + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; - struct nand_bbt_descr *badblock_pattern; + struct nand_bbt_descr *badblock_pattern; - void *priv; + void *priv; }; /* * NAND Flash Manufacturer ID Codes */ -#define NAND_MFR_TOSHIBA 0x98 -#define NAND_MFR_SAMSUNG 0xec -#define NAND_MFR_FUJITSU 0x04 -#define NAND_MFR_NATIONAL 0x8f -#define NAND_MFR_RENESAS 0x07 -#define NAND_MFR_STMICRO 0x20 -#define NAND_MFR_HYNIX 0xad -#define NAND_MFR_MICRON 0x2c -#define NAND_MFR_AMD 0x01 -#define NAND_MFR_MACRONIX 0xc2 -#define NAND_MFR_EON 0x92 +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec +#define NAND_MFR_FUJITSU 0x04 +#define NAND_MFR_NATIONAL 0x8f +#define NAND_MFR_RENESAS 0x07 +#define NAND_MFR_STMICRO 0x20 +#define NAND_MFR_HYNIX 0xad +#define NAND_MFR_MICRON 0x2c +#define NAND_MFR_AMD 0x01 +#define NAND_MFR_MACRONIX 0xc2 +#define NAND_MFR_EON 0x92 + +/* The maximum expected count of bytes in the NAND ID sequence */ +#define NAND_MAX_ID_LEN 8 + +/* + * A helper for defining older NAND chips where the second ID byte fully + * defined the chip, including the geometry (chip size, eraseblock size, page + * size). All these chips have 512 bytes NAND page size. + */ +#define LEGACY_ID_NAND(nm, devid, chipsz, erasesz, opts) \ + { .name = (nm), {{ .dev_id = (devid) }}, .pagesize = 512, \ + .chipsize = (chipsz), .erasesize = (erasesz), .options = (opts) } + +/* + * A helper for defining newer chips which report their page size and + * eraseblock size via the extended ID bytes. + * + * The real difference between LEGACY_ID_NAND and EXTENDED_ID_NAND is that with + * EXTENDED_ID_NAND, manufacturers overloaded the same device ID so that the + * device ID now only represented a particular total chip size (and voltage, + * buswidth), and the page size, eraseblock size, and OOB size could vary while + * using the same device ID. + */ +#define EXTENDED_ID_NAND(nm, devid, chipsz, opts) \ + { .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \ + .options = (opts) } /** * struct nand_flash_dev - NAND Flash Device ID Structure - * @name: Identify the device type - * @id: device ID code - * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 - * If the pagesize is 0, then the real pagesize - * and the eraseize are determined from the - * extended id bytes in the chip - * @erasesize: Size of an erase block in the flash device. - * @chipsize: Total chipsize in Mega Bytes - * @options: Bitfield to store chip relevant options + * @name: a human-readable name of the NAND chip + * @dev_id: the device ID (the second byte of the full chip ID array) + * @mfr_id: manufecturer ID part of the full chip ID array (refers the same + * memory address as @id[0]) + * @dev_id: device ID part of the full chip ID array (refers the same memory + * address as @id[1]) + * @id: full device ID array + * @pagesize: size of the NAND page in bytes; if 0, then the real page size (as + * well as the eraseblock size) is determined from the extended NAND + * chip ID array) + * @chipsize: total chip size in MiB + * @erasesize: eraseblock size in bytes (determined from the extended ID if 0) + * @options: stores various chip bit options + * @id_len: The valid length of the @id. + * @oobsize: OOB size */ struct nand_flash_dev { char *name; - int id; - unsigned long pagesize; - unsigned long chipsize; - unsigned long erasesize; - unsigned long options; + union { + struct { + uint8_t mfr_id; + uint8_t dev_id; + }; + uint8_t id[NAND_MAX_ID_LEN]; + }; + unsigned int pagesize; + unsigned int chipsize; + unsigned int erasesize; + unsigned int options; + uint16_t id_len; + uint16_t oobsize; }; /** @@ -542,7 +614,7 @@ struct nand_flash_dev { */ struct nand_manufacturers { int id; - char * name; + char *name; }; extern struct nand_flash_dev nand_flash_ids[]; @@ -555,13 +627,8 @@ extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt); extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, uint8_t * buf); + size_t *retlen, uint8_t *buf); extern int add_mtd_nand_device(struct mtd_info *mtd, char *devname); -/* -* Constants for oob configuration -*/ -#define NAND_SMALL_BADBLOCK_POS 5 -#define NAND_LARGE_BADBLOCK_POS 0 /** * struct platform_nand_chip - chip level device structure @@ -571,40 +638,52 @@ extern int add_mtd_nand_device(struct mtd_info *mtd, char *devname); * @partitions: mtd partition list * @chip_delay: R/B delay value in us * @options: Option flags, e.g. 16bit buswidth - * @ecclayout: ecc layout info structure + * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH + * @ecclayout: ECC layout info structure * @part_probe_types: NULL-terminated array of probe types - * @priv: hardware controller specific settings */ struct platform_nand_chip { - int nr_chips; - int chip_offset; - int nr_partitions; - struct mtd_partition *partitions; - struct nand_ecclayout *ecclayout; - int chip_delay; - unsigned int options; - const char **part_probe_types; - void *priv; + int nr_chips; + int chip_offset; + int nr_partitions; + struct mtd_partition *partitions; + struct nand_ecclayout *ecclayout; + int chip_delay; + unsigned int options; + unsigned int bbt_options; + const char **part_probe_types; }; +/* Keep gcc happy */ +struct platform_device; + /** * struct platform_nand_ctrl - controller level device structure + * @probe: platform specific function to probe/setup hardware + * @remove: platform specific function to remove/teardown hardware * @hwcontrol: platform specific hardware control structure * @dev_ready: platform specific function to read ready/busy pin * @select_chip: platform specific chip select function * @cmd_ctrl: platform specific function for controlling * ALE/CLE/nCE. Also used to write command and address + * @write_buf: platform specific function for write buffer + * @read_buf: platform specific function for read buffer + * @read_byte: platform specific function to read one byte from chip * @priv: private data to transport driver specific settings * * All fields are optional and depend on the hardware driver requirements */ struct platform_nand_ctrl { - void (*hwcontrol)(struct mtd_info *mtd, int cmd); - int (*dev_ready)(struct mtd_info *mtd); - void (*select_chip)(struct mtd_info *mtd, int chip); - void (*cmd_ctrl)(struct mtd_info *mtd, int dat, - unsigned int ctrl); - void *priv; + int (*probe)(struct platform_device *pdev); + void (*remove)(struct platform_device *pdev); + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*select_chip)(struct mtd_info *mtd, int chip); + void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + unsigned char (*read_byte)(struct mtd_info *mtd); + void *priv; }; /** @@ -613,8 +692,8 @@ struct platform_nand_ctrl { * @ctrl: controller level device structure */ struct platform_nand_data { - struct platform_nand_chip chip; - struct platform_nand_ctrl ctrl; + struct platform_nand_chip chip; + struct platform_nand_ctrl ctrl; }; /* Some helpers to access the data structures */ @@ -626,6 +705,20 @@ struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) return chip->priv; } -#endif /* DOXYGEN_SHOULD_SKIP_THIS */ +/* return the supported asynchronous timing mode. */ +static inline int onfi_get_async_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.async_timing_mode); +} + +/* return the supported synchronous timing mode. */ +static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); +} #endif /* __LINUX_MTD_NAND_H */ |