| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|\ \ \ \
| | | | |
| | | | |
| | | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
oftree -f is gone and now global.bootm.boot_atag must be set to true
if boot using ATAGs is desired. Update the documentation accordingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Being able to free the live device tree seemed like a good idea in the
early days of device tree support when the first boards were brought up.
It turned out to be illusory that noone stores pointers to the live tree
which become invalid when oftree -f is executed. Enough people stumbled
upon crashed boards with this option, so remove it finally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
So far we can only force legacy boot using ATAGs by executing
'oftree -f'. Said command is going away as often this command
is not safe to call. Add an alternative way using the
global.bootm.boot_atag environment variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ \ |
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Similar to imx_v7_defconfig, add imx_v8_defconfig as a default
configuration encompassing all ARMv8 based i.MX SoCs.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Use a loop to create multiple header copies on i.MX35 to avoid code
duplication.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Add DDRC PHY support code needed to upload DDR training firwmare as
well as to wait for the training process to complete.
Those are needed to support board specific DDR initialization code.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Provide IN_PBL as boolean constant which can be tested for in C.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/ / /
| |/| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Provide missing .format_mac for i.MX8MQ to prevent driver from
crashing on start.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ \ |
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
On i.MX6 GPMI Nand controller the clock must be disabled during
a rate change. Otherwise glitches on the clock line may occur
which result in errors like:
MXS NAND: Error sending command
MXS NAND: DMA read error
There were previous attempts to fix this. One is in:
54961378f0 imx6: clk: Gate off ENFC clock before setting clock rate
This patch added a clk_disable() right before the rate change. Since
a clk_disable() on a disabled clk is a no-op, the patch added a
clk_enable() to the i.MX6 clk driver in the hope that the clk is
enabled in the nand driver probe and the clk_disable() really takes
place.
This patch doesn't work. First of all it enabled the enfc_podf clk
which was not the one that was actually disabled in the nand driver,
resulting in the nand drivers call to clk_disable() still being a
no-op. Then this patch also only works only on the classic i.MX6 which
was the only one supported at that time, but not on the i.MX6UL, i.MX6SX
and i.MX6SL which have a separate clk driver.
Instead of adding more quirks to the other i.MX6 clk drivers, fix this
in the GPMI driver. We no longer call clk_disable() on a disabled clk,
but instead do a clk_enable() first which makes sure the hardware state
is synchronized to the usage count and the following clk_disable()
is really effective. At the same time we can (and actually must) remove
the quirk in the i.MX6 clk driver.
Also add clk_disable()/clk_enable() around another rate change in the
GPMI driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Convert RAVE SP EEPROMs to use "zii,eeprom-name" instead of aliases in
order to minimize differences with upstream Linux DT.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Convert RAVE SP EEPROMs to use "zii,eeprom-name" instead of aliases in
order to minimize differences with upstream Linux DT.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Upstream kernel driver allows specifying EEPROM name via
"zii,eeprom-name" property. Add code to support that in Barebox as
well.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This is a backport of patch [1] by Kees Cook
[1] https://lkml.kernel.org/r/20180620182600.GA24297@beast
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
ZII RDU1 is a i.MX51 based, Babbagde board derivative supported by
upstream kernel. This commit add support for it to Barebox.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Some board designs copy i.MX51 Babbadge board's PMIC design and so
require exactly the same initialization. Move correspoding code into a
separate file so it can be shared.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Change is_timeout() to sample current time before invoking poller
infrascructure to avoid occasional false timeout conditions.
Consider the following timeout loop (can be found in wait_on_timeout):
while (!(condition)) {
if (is_timeout(...)) {
return -ETIMEDOUT;
}
}
...
in the original logic of is_timeout() it was possible to end up in the
following situation:
1. Immediate check of of "condition" yeilds false (not enough
time for it to become true has passed yet)
2. is_timeout is called which, in turn, calls poller_call()
3. All registerd pollers take more than specified timeout time
to execute.
4. Sometime during poller_call() "contition" becomes true
5. As a result of #3 is_timeout() returns "true"
6. Code bails out with -ETIMEDOUT early even though timeout
condition didn't really occur.
One concrete example of this problem was discovered on ZII RDU1
board (poller_call() is long due to a serdev) when doing large data
transfers over SPI to attached DataFlash chip.
This commit changes is_timeout() to sample the value of time before
calling poller_call(). This way first call to is_timeout() will almost
always return false thus checking the condition at least twice before
declaring a timeout.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Call to dev_dbg in dataflash_read() is located to early, before
command[] is initialize to correct values, so it end up printing
values from previous invocation. Move it such that it prints current
call's values.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The i.MX header is at an offset in the boot device, usually 0x400 bytes.
This patch adds a flag to support the case that the partition the image
is written to starts at that offset rather than 0x0.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This patch reimplements the IMX_INTERNAL_FLAG_KEEP_DOSPART flag
and makes it more generic. Until now we only kept a dos partition
table over the update. Beginning with i.MX8 we may also want to
preserve a GPT, so we have to extend the preserved area.
It might also be the case that not (only) a partition table is
stored in the initial area of a device, but also other unrelated
data, so it's better to just keep the initial area that is unused
by the i.MX ROM. It's also good to export the flag to allow boards
to specify the initial area shall be preserved.
When a board wants to set the flag for a mtd like device then it
has to check for suitable erase sizes beforehand. We do not check
this (yet).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Now that we can store flags in the generic handler flags
we no longer need our own variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Let the handler store 16 bit of handler specific flags in
the generic handler struct. The setup functions of some
bbu handlers let the user specify a flags field. With this
change they can now pass generic and handler specific flags
in a single variable without having to use a second parameter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
RDU2 stores MAC addresses for its Ethernet interfaces in main RAVE SP
EEPROM. Add code to properly integrate it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Introduce nvmem_cell_get_and_read() that combines getting a NVMEM cell
by name and reading its contents.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Change write register accesses to read-modify-write accesses. This
makes it clearer which bits are actually changed by the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
RAVE SP firmware versions found on RDU2 provide decicated bootsource
manipulation commands, which, under the hood, are just thin wrappers
around write/read to a particular location in EEPROM.
Unfortunately, RAVE SP firmware found on RDU1, does not provide any
dedicated bootsource commands and its users are expected to access
EEPROM directly.
In order to avoid having separate code paths for handling those two
cases, convert the code to access EEPROM directly via NVMEM API.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This code should've been removed when the driver was rebased against
latest watchdog plumbing in Barebox.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
All of the code in this commit is:
a) Obsolete and intended to work with a driver that has never been
submitted upstream anywhere and is no longer used
b) Superceeded by the DT code in Linux DT tree
Remove it all and rely on Linux DTS files to properly specify RAVE SP
MFD with a watchdog child node.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This is needed when host is known to not work properly in high speed
mode.
In linux, chipidea driver supports 'maximum-speed' device tree property.
When that is set to "full-speed", driver sets PFSC bit in PORTSC
register, which disallows use of high speed mode.
This patch implements same support for barebox.
Important technical detail is that PFSC bit is cleared by port reset,
thus setting it has to be done in ehci->init() callback which is called
after ehci_reset().
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This is a minimal port of a kernel commit 6552d3141064 ("backlight:
Add RAVE SP backlight driver"). All of the changes were kept to a
minimum and limited to impedance matching between Barebox/Linux driver
API.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This is a minimal port of a kernel commit 3b51f47be171 ("nvmem: Add
RAVE SP EEPROM driver"). All of the changes were kept to a minimum and
limited to impedance matching between Barebox/Linux driver API.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
While at it, also remove pinux configuration for RX pin (completely
unused) and fix strange setup_uart()'s indentation.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The Advantech ROM-7421 has a custom watchdog reset i2c chip that has
some control gpios. This watchdog is currently not used, therefore mux
its control pins as pull-downs to be sure that the watchdog is disabled
after e.g. a reboot.
For debug purposes this patch also adds i2c1 node.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Latest kernel ./dts/ is providing proper pin and fec
configs. This overwrites are preventing kernel from
net boot if barebox is DT source.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|