| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To get the number of address cells and size cells we have to use
the newly created partition node, not the parent device node. The
parent device node returns the address/size cells of the controller
node, not the partition node.
On an am335x machine this fixes the device tree passed to Linux.
The situation there is:
...
gpmc@50000000 {
...
#address-cells = <0x2>;
#size-cells = <0x1>;
ranges = <0x0 0x0 0x8000000 0x10000000>;
...
nand@0,0 {
reg = <0x0 0x0 0x0>;
#address-cells = <0x1>;
#size-cells = <0x1>;
...
partition@7 {
label = "system";
reg = <0x220000 0x7de0000>;
};
};
};
and without this patch barebox passes three bytes for
partition@7's reg property instead of only two which naturally
confuses Linux and yields to the system partition to start at 0
with a size of 0x220000.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
When working with non-coherent transfer buffers, we have to sync
device and cpu for outgoing and incoming buffers. Fix the driver where
non-coherent buffers are used in device context.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch adds a framework to describe, access, store and restore a set of
variables. A state variable set can be fully described in a devicetree node.
This node could be part of the regular devicetree blob or it could be an extra
devicetree solely for the state. The state variable set contains variables of
different types and a place to store the variable set.
For more information see:
Documentation/devicetree/bindings/barebox/barebox,state.rst
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
As hinted in the linux kernel driver, pxa platforms such as mainstone,
stargate and idp have a broken design, where half-word writes not
aligned to a word address are not working.
This patch is a taking back the half-word write accessor for this
specific case from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Based on the corresponding kernel driver with changes to make it
work on barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Based on the corresponding kernel driver, only small changes
to make it work on barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Test for the correct resource before derefencing it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Use pr_debug instead of custom DBG macro.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ |
|
| |/ / /
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This adds the Intel e1000 driver from U-Boot. The driver looks in parts
quite similar to the kernel driver, I don't know whether one is derived
from the other or if they both just have the same origin.
Many coding style related issues are fixed, the code is simplified in
several places. All features of the original driver should still be there,
only fiber support is disabled since it's quite unlikely that this is
used in barebox.
The driver has been tested with the i.MX6 PCIe driver and a I210 e1000
device (0x8086:0x1533)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ |
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Disable the watchdog powerdown counter at start. Otherwise this may
trigger a reset or poweroff over the WDOG_B line to a PMIC. This counter
is set to 16 seconds after poweron.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Replace the set_timeout function in the device platform data by an ops
struct which stores a set_timeout and init function.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
When a watchdog timeout is set in the linux kernel, the FORCE_UPDATE bit is set.
Use this to recognize a system reset that was triggered by the watchdog.
Since only the wdt part of the kernel driver sets this bit, this is a safe
distinguishing feature.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ \
| |_|_|/ /
|/| | | | |
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
In devices_shutdown we should call the busses remove function
which in turn calls the drivers remove function. Otherwise for
example PCI devices never get removed since they do not have
a remove function but a pcidev->remove function instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The bus implementations currently call the drivers remove
hook unconditionally, but this hook is seldomly populated. Only call
it when it's actually populated.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/ /
| |/| |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The active list is supposed to collect active devices in the
opposite order they are probed. This is used to remove the
devices in the correct order in devices_shutdown. The order
is wrong though when in a drivers probe function other devices
are registered. To get the order right we have to add the new
device to the active list before it is probed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The configuration and control setup introduced in commit "extend the
driver for 91c94 and 91c96 support" suffers from a typo defect, which
makes the commit broken.
The typo happens to be in barebox tree, while it's not in the tested
patches I had, and there was a mismatch in my former submission, which
is fixed by this patch.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Marvell Neta's transmit descriptor (txdesc) is allocated by dma_alloc_coherent()
but not zeroed before calling mvneta_send the first time. This can cause spurious
transmit errors due to improperly set bits in txdesc's cmd_sts field.
Fix initial transmit errors by always writing whole cmd_sts field instead of ORing
the bits.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Commit b8a1bb1dd215 (pci: defer device registration until after bridge setup)
changed the activation order of devices, so that bridges above the devices could
be configured properly before activating the devices below. This commit failed
to acknowledge that there may be devices located directly on the root bus without
any bridge in between and so those devices would never get enabled.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The bch8 romcode was only checked and corrected for the
first 512 bytes of a 2048 byte page. Set interation counter
and eccsizes correct for the different bch types.
Tested OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH8_CODE_HW_ROMCODE.
Reported-by: Gabor Janak <g.janak@agilion.de>
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The ecc layout structs are not used anywhere.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The driver needs the dma coherent function and thus can
only work on architectures implementing them.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Fixes:
error: 'clk_register_fractional_divider' undeclared here
introduced with commit 22a0c31c9265 (CLK: Add fractional
divider clock support from Linux kernel)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/ / /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit 03b59bdb64e83ebcdb9111681775117ebce0e03b changed the
return values of dev_add_param_* to ERR_PTR(-ENOSYS) and broke a few boards.
We have now to care about the return value of dev_add_param_bool() in
mci_register().
Also set the ret variable when dev_add_param_bool() fails.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/ /
| |
| |
| |
| |
| |
| |
| | |
Add the required brackets, so that we don't write unused registers
with potentially bogus values.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
| |
The divider lacks the code for calculating the maximum divider for table
based dividers. Add it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
Simplify PIO mode routines.
Fix a bug when IO is possibly performed twice because of using old
interrupt status.
Support for slow-speed card writes.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| | |
This allows to have fixed device names for the SDMMC
controllers.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
of_alias_get assumed that a DT path is always the full node path,
whic is not necessarily the case, as there are other valid path
descriptions. All of them are handled by of_find_node_by_path.
As there is already a preparsed list with all DT aliases that handles
this case properly we can simply reuse that one.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \
| | |
| | |
| | |
| | | |
Conflicts:
drivers/mci/dw_mmc.c
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|