| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
| |
Currently the backlight implementation stretches a brightness change over
a period of 100ms. While this is a fine default for PWM backlights, a user
might wish to change this slew time to meet other constraints or even
completely disable it for some backlight devices.
Add a parameter and provide the default value from the backlight device.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If an attached bb device was removed before the actual mtd device
the code would try due to a missing pointer reset to access
the no more present bb device handle which leads to a page fault.
This bug was made visible by commit "7649473 mtd: nand: remove
automatically created bb devices" which relys on a correct
mtd->cdev_bb handling.
Signed-off-by: Heinrich Toews <heinrich.toews@wago.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| | |
Make of_property_get_value() public, so it can be used in other part
of the system.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Remove an erroneous bch4 string leftover that
leads to a false ecc mode mapping.
BCH4 support was previously removed by Teresa Remmet:
d316cda 'mtd: nand: omap_gpmc: Remove BCH4 support'
Signed-off-by: Heinrich Toews <heinrich.toews@wago.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The eccsteps where set wrong for OMAP_ECC_BCH8_CODE_HW_ROMCODE.
So the ECC was only corrected for the first 512 bytes chunk of a 2k page.
Moved out the ecc step iteration out of the correcting loop to make
it more alike the generic nand functions. And made sure that
the ECC is caclulated for all chunks.
This patch is based on work of Sascha Hauer.
Fixes commit dec7b4d2bf9c ("mtd: nand_omap_gpmc: fix BCH error correction").
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
get_drv_data(..., &data->type) overwrites memory beyond data->type member due
to mismatch of sizeof(enum pca_type) and sizeof(void *) on 64 bit systems.
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
write_buff() uses ~(flash_info.portwidth - 1) to mask lower bits of addr. This
causes higher 32 bits of addr to be discarded on a 64 bit system, since
flash_info.portwidth is 32 bits long (unsigned int) and addr is 64 bits long
(unsigned long).
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: Rebased to account for move to nvmem]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Not that barebox has a proper NVMEM subsystem, convert OCOTP driver to
use that to both make things more consistent with Linux and also allow
accessing OCOTP fields without the need for
imx_ocotp_read_field()/imx_ocotp_write_field().
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Original name, 'nvmemN', doesn't really give any hint about which
physical HW it may represent, so change the code to either pick up an
DT alias or use the name passed via 'struct nvmem_config'.
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move OCOTP driver to drivers/nvmem to be consistent with Linux
kerenel.
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
There are no users of that function outside of the driver itself, so
re-declare it as static.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Move inline assembly related to querying and counter value as well as
getting and setting counter frequency register into asm/system.h as
well as converting it inot helper functions. This is done to make the
code availible to other parts of the system.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This is based on Lucas' patch sent as "[PATCH v2 4/4] clk: imx: add
clock driver for i.MX8MQ CCM" to the mailing list.
It will likely need some rework before it is finally merged, so apply
the reworks here before merging into barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: Fix pll type for IMX8MQ_VIDEO2_PLL1]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Rather than doing DMA on the input buffer address get a proper DMA
address from the mapping functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The fec receive buffers are coherently mapped, no need to dma_sync on
them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Rather than relying on the fact that addresses can be just casted
into DMA addresses use proper DMA mapping functions.
This fixes compiler warnings when we do DMA on this 32bit only device
on aarch64 SoCs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |/
| |/|
| | |
| | |
| | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Some device trees use pinctrl-* settings inside device tree nodes for
clock providers.
Barebox does not threat clock providers (such as fixed-clock or
gpio-gate-clock) as conventional devices, thus setting default
pinctrl configuration in driver binding code does not happen for
clock providers.
This patch adds setting default pinctrl configuration to of_clk_init(),
just before calling clock provider's probe routine.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This implements support for gpio-gate-clock device tree nodes, that
define clocks that can be enabled or disabled via GPIO line.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | | |
Fixes: 1ef7cd07a304 (watchdog: rename dev to hwdev)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/
|/|
| |
| |
| |
| |
| |
| | |
When printing the partition size with "0x" prefix the value has to
be displayed in hex.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
|
|
| |
Commit e5098495 "usb: gadget: fastboot: Add option to download to a buffer"
breaks the use of temporary files for fastboot barebox_update.
In the patch the ".imagefile = FASTBOOT_TMPFILE" allocation gets
removed, but data.imagefile is still used. This leads to an NULL
pointer dereference. We fix it by using sourcefile instead.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If MFD_SYSCON is disabled in .config then socfpga_designware_eth probe
fails with this message:
socfpga_designware_eth ff702000.ethernet: Could not get sysmgr-syscon node
Thanks to Steffen for hint!
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Depending on specifics, some 'serdev' devices might need prevent
parent console device from being removed and corresponding memory
deallocated to properly function until the very end of Barebox's
execution. An example of such a use-case would be a reset handler
relying on a serdev device for transport.
To avoid having to develop complicatione reference counting/ownership
scheme drop all of the code that calls console_unregister() and frees
the memory effectively making the problem above impossible to arise.
All of the de-initialization that serial drivers were doing in their
.remove functions was somewhat superflous anyway, so this change
should be pretty harmless.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/
| |
| |
| |
| |
| |
| |
| |
| | |
Port 'serdev' UART-slave deivce framework found in recent Linux
kernels (post 4.13) in order to be able to port 'serdev' slave drivers
from Linux.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Since commit a4cee7207a1 ("net: phy: micrel: Add workaround for bad
autoneg") by Philipp Zabel <p.zabel@pengutronix.de>:
Based on kernel commit d2fd719bcb0e ("net/phy: micrel: Add workaround
for bad autoneg") by Nathan Sullivan <nathan.sullivan@ni.com>:
Very rarely, the KSZ9031 will appear to complete autonegotiation, but
will drop all traffic afterwards. When this happens, the idle error
count will read 0xFF after autonegotiation completes. Reset the PHY
when in that state.
is it possible that we get the link to late and barebox reports "Network is
down". The problem is that ksz9031_config_init is called again in an
error case. In this case autoneg will restart but waiting for finish is
missing.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Tested-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Port RAVE SP watchdog driver from Linux kernel
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Port MFD driver for RAVE SP from Linux kernel.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Timeout of 1ms is too low for case when device operates in Full Speed
mode. This causes most incoming frames to be lost.
Since timeout is only used to get out of polling loop in case of no
response from hardware, increasing it should be safe for all platforms.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Tested-By: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Otherwise the i2c core will try to populate the TC358767 child nodes
as i2c devices, which is wrong.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | | |
| | | |
| | | |
| | | |
| | | | |
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ \ |
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
|