blob: 74d11ffe59d5f16aa873402a88c903c8956f9c22 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
D-Link DIR-320
==============
The D-Link DIR-320 wireless router has
* BCM5354 SoC;
* 32 MiB SDRAM;
* 4 MiB NOR type Flash Memory;
* RS232 serial interface (LV-TTL levels on board!);
* 1xUSB interface;
* 4 + 1 ethernet interfaces;
* 802.11b/g (WiFi) interface;
* JTAG interface;
* 5 LEDs;
* 2 buttons.
The router uses CFE as firmware.
Running barebox
---------------
Barebox can be started from CFE using tftp.
You must setup tftp-server on host 192.168.0.1.
Put your barebox.bin to tftp-server directory
(usual /tftpboot or /srv/tftp).
Connect your DIR-320 to your tftp-server network via
one of four <LAN> sockets.
Next, setup network on DIR-320 and run barebox.bin, e.g.::
CFE> ifconfig eth0 -addr=192.168.0.99
CFE> boot -tftp -addr=a0800000 -raw 192.168.0.1:barebox.bin
Links
-----
* http://www.dlink.com.au/products/?pid=768
* http://wiki.openwrt.org/toh/d-link/dir-320
CFE links:
* http://www.broadcom.com/support/communications_processors/downloads.php#cfe
* http://www.linux-mips.org/wiki/CFE
|