1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
/*
* Copyright (C) 2014 Steffen Trumtrar, Pengutronix
*
*
* with the PMIC init code taken from u-boot
* Copyright (C) 2012,2013 Lothar Waßmann <LW@KARO-electronics.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <common.h>
#include <gpio.h>
#include <init.h>
#include <i2c/i2c.h>
#include <linux/clk.h>
#include <environment.h>
#include <mach/bbu.h>
#include <mach/imx6.h>
#include <mfd/imx6q-iomuxc-gpr.h>
#define ETH_PHY_RST IMX_GPIO_NR(7, 6)
#define ETH_PHY_PWR IMX_GPIO_NR(3, 20)
#define ETH_PHY_INT IMX_GPIO_NR(7, 1)
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
#define LTC3676_BUCK1 0x01
#define LTC3676_BUCK2 0x02
#define LTC3676_BUCK3 0x03
#define LTC3676_BUCK4 0x04
#define LTC3676_DVB1A 0x0A
#define LTC3676_DVB1B 0x0B
#define LTC3676_DVB2A 0x0C
#define LTC3676_DVB2B 0x0D
#define LTC3676_DVB3A 0x0E
#define LTC3676_DVB3B 0x0F
#define LTC3676_DVB4A 0x10
#define LTC3676_DVB4B 0x11
#define LTC3676_MSKPG 0x13
#define LTC3676_CLIRQ 0x1f
#define LTC3676_BUCK_DVDT_FAST (1 << 0)
#define LTC3676_BUCK_KEEP_ALIVE (1 << 1)
#define LTC3676_BUCK_CLK_RATE_LOW (1 << 2)
#define LTC3676_BUCK_PHASE_SEL (1 << 3)
#define LTC3676_BUCK_ENABLE_300 (1 << 4)
#define LTC3676_BUCK_PULSE_SKIP (0 << 5)
#define LTC3676_BUCK_BURST_MODE (1 << 5)
#define LTC3676_BUCK_CONTINUOUS (2 << 5)
#define LTC3676_BUCK_ENABLE (1 << 7)
#define LTC3676_PGOOD_MASK (1 << 5)
#define LTC3676_MSKPG_BUCK1 (1 << 0)
#define LTC3676_MSKPG_BUCK2 (1 << 1)
#define LTC3676_MSKPG_BUCK3 (1 << 2)
#define LTC3676_MSKPG_BUCK4 (1 << 3)
#define LTC3676_MSKPG_LDO2 (1 << 5)
#define LTC3676_MSKPG_LDO3 (1 << 6)
#define LTC3676_MSKPG_LDO4 (1 << 7)
#define VDD_IO_VAL mV_to_regval(vout_to_vref(3300 * 10, 5))
#define VDD_IO_VAL_LP mV_to_regval(vout_to_vref(3100 * 10, 5))
#define VDD_IO_VAL_2 mV_to_regval(vout_to_vref(3300 * 10, 5_2))
#define VDD_IO_VAL_2_LP mV_to_regval(vout_to_vref(3100 * 10, 5_2))
#define VDD_SOC_VAL mV_to_regval(vout_to_vref(1425 * 10, 6))
#define VDD_SOC_VAL_LP mV_to_regval(vout_to_vref(900 * 10, 6))
#define VDD_DDR_VAL mV_to_regval(vout_to_vref(1500 * 10, 7))
#define VDD_DDR_VAL_LP mV_to_regval(vout_to_vref(1500 * 10, 7))
#define VDD_CORE_VAL mV_to_regval(vout_to_vref(1425 * 10, 8))
#define VDD_CORE_VAL_LP mV_to_regval(vout_to_vref(900 * 10, 8))
/* LDO1 */
#define R1_1 470
#define R2_1 150
/* LDO4 */
#define R1_4 470
#define R2_4 150
/* Buck1 */
#define R1_5 390
#define R2_5 110
#define R1_5_2 470
#define R2_5_2 150
/* Buck2 (SOC) */
#define R1_6 150
#define R2_6 180
/* Buck3 (DDR) */
#define R1_7 150
#define R2_7 140
/* Buck4 (CORE) */
#define R1_8 150
#define R2_8 180
/* calculate voltages in 10mV */
#define R1(idx) R1_##idx
#define R2(idx) R2_##idx
#define vout_to_vref(vout, idx) ((vout) * R2(idx) / (R1(idx) + R2(idx)))
#define vref_to_vout(vref, idx) DIV_ROUND_UP((vref) * (R1(idx) + R2(idx)), R2(idx))
#define mV_to_regval(mV) DIV_ROUND(((((mV) < 4125) ? 4125 : (mV)) - 4125), 125)
#define regval_to_mV(v) (((v) * 125 + 4125))
static struct ltc3673_regs {
u8 addr;
u8 val;
u8 mask;
} ltc3676_regs[] = {
{ LTC3676_MSKPG, ~LTC3676_MSKPG_BUCK1, },
{ LTC3676_DVB2B, VDD_SOC_VAL_LP | LTC3676_PGOOD_MASK, ~0x3f, },
{ LTC3676_DVB3B, VDD_DDR_VAL_LP, ~0x3f, },
{ LTC3676_DVB4B, VDD_CORE_VAL_LP | LTC3676_PGOOD_MASK, ~0x3f, },
{ LTC3676_DVB2A, VDD_SOC_VAL, ~0x3f, },
{ LTC3676_DVB3A, VDD_DDR_VAL, ~0x3f, },
{ LTC3676_DVB4A, VDD_CORE_VAL, ~0x3f, },
{ LTC3676_BUCK1, LTC3676_BUCK_BURST_MODE | LTC3676_BUCK_CLK_RATE_LOW, },
{ LTC3676_BUCK2, LTC3676_BUCK_BURST_MODE, },
{ LTC3676_BUCK3, LTC3676_BUCK_BURST_MODE, },
{ LTC3676_BUCK4, LTC3676_BUCK_BURST_MODE, },
{ LTC3676_CLIRQ, 0, }, /* clear interrupt status */
};
static struct ltc3673_regs ltc3676_regs_2[] = {
{ LTC3676_DVB1B, VDD_IO_VAL_2_LP | LTC3676_PGOOD_MASK, ~0x3f, },
{ LTC3676_DVB1A, VDD_IO_VAL_2, ~0x3f, },
};
static int setup_pmic_voltages(void)
{
struct i2c_adapter *adapter = NULL;
struct i2c_client client;
int addr = 0x3c;
int bus = 0;
int i;
struct ltc3673_regs *r;
adapter = i2c_get_adapter(bus);
if (!adapter) {
pr_err("i2c bus %d not found\n", bus);
return -ENODEV;
}
client.adapter = adapter;
client.addr = addr;
r = ltc3676_regs;
for (i = 0; i < ARRAY_SIZE(ltc3676_regs); i++, r++) {
if (i2c_write_reg(&client, r->addr, &r->val, 1) != 1) {
pr_err("i2c write error\n");
return -EIO;
}
}
r = ltc3676_regs_2;
for (i = 0; i < ARRAY_SIZE(ltc3676_regs_2); i++, r++) {
if (i2c_write_reg(&client, r->addr, &r->val, 1) != 1) {
pr_err("i2c write error\n");
return -EIO;
}
}
return 0;
}
static void eth_init(void)
{
void __iomem *iomux = (void *)MX6_IOMUXC_BASE_ADDR;
uint32_t val;
val = readl(iomux + IOMUXC_GPR1);
val |= IMX6Q_GPR1_ENET_CLK_SEL_ANATOP;
writel(val, iomux + IOMUXC_GPR1);
}
static int tx6x_devices_init(void)
{
if (!of_machine_is_compatible("karo,imx6dl-tx6dl") &&
!of_machine_is_compatible("karo,imx6q-tx6q"))
return 0;
barebox_set_hostname("tx6u");
eth_init();
setup_pmic_voltages();
imx6_bbu_nand_register_handler("nand", BBU_HANDLER_FLAG_DEFAULT);
return 0;
}
device_initcall(tx6x_devices_init);
|