1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
// SPDX-License-Identifier: GPL-2.0+
// SPDX-FileCopyrightText: 2017 Sam Ravnborg <sam@ravnborg.org>
#include <common.h>
#include <globalvar.h>
#include <magicvar.h>
#include <envfs.h>
#include <init.h>
#include <gpio.h>
#include <bootsource.h>
#include <linux/sizes.h>
#include <mach/at91/at91sam9263_matrix.h>
#include <mach/at91/at91sam9_sdramc.h>
#include <mach/at91/at91sam9_smc.h>
#include <mach/at91/hardware.h>
#include <mach/at91/iomux.h>
static struct sam9_smc_config skov_nor_smc_config = {
/* Setup time is 2 cycles after the CS signal */
.nwe_setup = 2,
.ncs_write_setup = 0,
.nrd_setup = 2,
.ncs_read_setup = 0,
/* Set pulse long enough - pulse should be a bit shorter than the cycle */
.nwe_pulse = 10,
.ncs_write_pulse = 12,
.nrd_pulse = 10,
.ncs_read_pulse = 12,
/* Set cycle long enougth at least 12 Cycles->120ns plus a little extra */
.write_cycle = 0x13,
.read_cycle = 0x13,
/* Set mode: 16Bit bus width, enable read and write
* Note: pagemode + 32 byte pages do not work with the 29GL512P flash
*/
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
AT91_SMC_BAT_WRITE |
AT91_SMC_DBW_16 |
AT91_SMC_TDFMODE,
.tdf_cycles = 1,
};
BAREBOX_MAGICVAR(board.mem, "The detected memory size in MiB");
static int mem;
/*
* Initialize of SMC must come after we
* probe the at91sam9_smc_driver.
* But is required before we start the other drives.
* Use device_initcall() to maintain this order.
*/
static int skov_arm9_probe(struct device *dev)
{
barebox_set_hostname("skov-arm9cpu");
add_generic_device("at91sam9-smc", 0, NULL, AT91SAM9263_BASE_SMC0, 0x200,
IORESOURCE_MEM, NULL);
add_generic_device("at91sam9-smc", 1, NULL, AT91SAM9263_BASE_SMC1, 0x200,
IORESOURCE_MEM, NULL);
/* configure chip-select 0 (NOR) */
sam9_smc_configure(0, 0, &skov_nor_smc_config);
mem = at91_get_sdram_size(IOMEM(AT91SAM9263_BASE_SDRAMC0));
mem = mem / SZ_1M;
globalvar_add_simple_int("board.mem", &mem, "%u");
/*
* NOR first stage bootloader is at91bootstrap, so if we find traces
* of barebox in on-chip SRAM, it must mean we have booted from SD
*/
if (is_barebox_arm_head((void *)AT91SAM9263_SRAM0_BASE))
bootsource_set_raw(BOOTSOURCE_MMC, BOOTSOURCE_INSTANCE_UNKNOWN);
return 0;
}
static __maybe_unused struct of_device_id skov_arm9_ids[] = {
{
.compatible = "skov,arm9-cpu",
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, skov_arm9_ids);
static struct driver skov_arm9_driver = {
.name = "skov-arm9",
.probe = skov_arm9_probe,
.of_compatible = DRV_OF_COMPAT(skov_arm9_ids),
};
coredevice_platform_driver(skov_arm9_driver);
|