summaryrefslogtreecommitdiffstats
path: root/doc/README-i386
blob: 02b753cbd7f48db79a9663ba8e86abb14d3cd7cb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
This is my attempt to port U-Boot to the i386 platform. This
work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se

It is currently capable of booting a linux bzImage from flash on
the AMD SC520 CDP platform.

It was originally based on PPCBoot taken from the CVS October 28 2002.

To compile:

1) Unpack the source tree, either from the complete tarball or
   from the virgin snapshot + the patch

2) Configure the source
   $ make sc520_cdp_comfig
   $ make

To use this code on the CDP:
1) Make a suitable kernel, I used 2.4.19 with the mtd-support updated
   from the MTD CVS and a patch to allow root=/dev/mtdblock1 which I
   included at the end of this file.
   The following options in the MTD section might be useful:

   CONFIG_MTD_PHYSMAP=y
   CONFIG_MTD_PHYSMAP_START=38100000
   CONFIG_MTD_PHYSMAP_LEN=7a0000
   CONFIG_MTD_PHYSMAP_BUSWIDTH=2


2) Program it in to the CDP flashbank with remon
   u-boot.bin should be programmed att offset 0x7e000 and the kernel at
   offset 0. If you want to use a jffs2 root file system (not included here),
   it should be  programmed to offset 0x100000.

   remon> z
   remon> yi
   remon> ns u-boot.bin 7e0000
   remon> ns bzImage 0
   remon> ns image.jffs2 100000

3) Connect a terminal to the 25pin serial port at 9600bps, and start the CDP.

   remon> z
   remon> g

4) U-Boot should output some message and a prompt on the terminal, to
   start the kernel issue the following command:

   BOOT> bootm

5) The kernel should boot, and mount the root filesystem if present.

We hope you find this stuff useful
Daniel Engström, Omicron Ceti AB, daniel@omicron.se


--- linux-2.4.19-orig/init/do_mounts.c	Sat Aug  3 02:39:46 2002
+++ linux-2.4.19/init/do_mounts.c	Mon Sep 23 16:21:33 2002
@@ -224,6 +224,14 @@
 	{ "ftlc", 0x2c10 },
 	{ "ftld", 0x2c18 },
 	{ "mtdblock", 0x1f00 },
+	{ "mtdblock0", 0x1f00 },
+	{ "mtdblock1", 0x1f01 },
+	{ "mtdblock2", 0x1f02 },
+	{ "mtdblock3", 0x1f03 },
+	{ "mtdblock4", 0x1f04 },
+	{ "mtdblock5", 0x1f05 },
+	{ "mtdblock6", 0x1f06 },
+	{ "mtdblock7", 0x1f07 },
 	{ NULL, 0 }
 };

-------------------