1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
maintainers:
- Iskren Chernev <iskren.chernev@gmail.com>
description:
This binding describes the Top Level Mode Multiplexer block found in the
SM4250/6115 platforms.
properties:
compatible:
const: qcom,sm6115-tlmm
reg:
minItems: 3
maxItems: 3
reg-names:
items:
- const: west
- const: south
- const: east
interrupts:
description: Specifies the TLMM summary IRQ
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
description:
Specifies the PIN numbers and Flags, as defined in defined in
include/dt-bindings/interrupt-controller/irq.h
const: 2
gpio-controller: true
'#gpio-cells':
description: Specifying the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h
const: 2
gpio-ranges:
maxItems: 1
wakeup-parent: true
#PIN CONFIGURATION NODES
patternProperties:
'-state$':
oneOf:
- $ref: "#/$defs/qcom-sm6115-tlmm-state"
- patternProperties:
".*":
$ref: "#/$defs/qcom-sm6115-tlmm-state"
'$defs':
qcom-sm6115-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
- enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
minItems: 1
maxItems: 36
function:
description:
Specify the alternative function to be configured for the specified
pins.
enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0,
ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist,
mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte,
m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag,
pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti,
qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb,
sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk,
uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
wlan1_adc0, elan1_adc1 ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
default: 2
description:
Selects the drive strength for the specified pins, in mA.
bias-pull-down: true
bias-pull-up: true
bias-disable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: "pinctrl.yaml#"
required:
- compatible
- reg
- reg-names
- interrupts
- interrupt-controller
- '#interrupt-cells'
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
tlmm: pinctrl@500000 {
compatible = "qcom,sm6115-tlmm";
reg = <0x500000 0x400000>,
<0x900000 0x400000>,
<0xd00000 0x400000>;
reg-names = "west", "south", "east";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 114>;
sdc2_on_state: sdc2-on-state {
clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
sd-cd {
pins = "gpio88";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
};
};
|
