diff options
Diffstat (limited to 'dts/Bindings/display/solomon,ssd1307fb.yaml')
| -rw-r--r-- | dts/Bindings/display/solomon,ssd1307fb.yaml | 28 |
1 files changed, 1 insertions, 27 deletions
diff --git a/dts/Bindings/display/solomon,ssd1307fb.yaml b/dts/Bindings/display/solomon,ssd1307fb.yaml index 20e2bd15d4..3afbb52d1b 100644 --- a/dts/Bindings/display/solomon,ssd1307fb.yaml +++ b/dts/Bindings/display/solomon,ssd1307fb.yaml @@ -27,38 +27,12 @@ properties: - solomon,ssd1307 - solomon,ssd1309 - reg: - maxItems: 1 - pwms: maxItems: 1 - reset-gpios: - maxItems: 1 - - # Only required for SPI - dc-gpios: - description: - GPIO connected to the controller's D/C# (Data/Command) pin, - that is needed for 4-wire SPI to tell the controller if the - data sent is for a command register or the display data RAM - maxItems: 1 - vbat-supply: description: The supply for VBAT - solomon,height: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Height in pixel of the screen driven by the controller. - The default value is controller-dependent. - - solomon,width: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Width in pixel of the screen driven by the controller. - The default value is controller-dependent. - solomon,page-offset: $ref: /schemas/types.yaml#/definitions/uint32 default: 1 @@ -148,7 +122,7 @@ required: - reg allOf: - - $ref: /schemas/spi/spi-peripheral-props.yaml# + - $ref: solomon,ssd-common.yaml# - if: properties: |