Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

1 files changed, 60 insertions, 10 deletions

diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt
index 5efae00f6c7fd..d2963123eb1cc 100644
--- a/Documentation/filesystems/nfs/nfsroot.txt
+++ b/Documentation/filesystems/nfs/nfsroot.txt
@@ -5,6 +5,7 @@ Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
 Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
 Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
 Updated 2006 by Horms <horms@verge.net.au>
+Updated 2018 by Chris Novakovic <chris@chrisn.me.uk>
 
 
 
@@ -79,7 +80,7 @@ nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
 
 
 ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:
-   <dns0-ip>:<dns1-ip>
+   <dns0-ip>:<dns1-ip>:<ntp0-ip>
 
   This parameter tells the kernel how to configure IP addresses of devices
   and also how to set up the IP routing table. It was originally called
@@ -110,6 +111,9 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:
 		will not be triggered if it is missing and NFS root is not
 		in operation.
 
+		Value is exported to /proc/net/pnp with the prefix "bootserver "
+		(see below).
+
 		Default: Determined using autoconfiguration.
 		         The address of the autoconfiguration server is used.
 
@@ -123,10 +127,13 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:
 
 		Default:  Determined using autoconfiguration.
 
-  <hostname>	Name of the client. May be supplied by autoconfiguration,
-  		but its absence will not trigger autoconfiguration.
-		If specified and DHCP is used, the user provided hostname will
-		be carried in the DHCP request to hopefully update DNS record.
+  <hostname>	Name of the client. If a '.' character is present, anything
+		before the first '.' is used as the client's hostname, and anything
+		after it is used as its NIS domain name. May be supplied by
+		autoconfiguration, but its absence will not trigger autoconfiguration.
+		If specified and DHCP is used, the user-provided hostname (and NIS
+		domain name, if present) will be carried in the DHCP request; this
+		may cause a DNS record to be created or updated for the client.
 
   		Default: Client IP address is used in ASCII notation.
 
@@ -162,12 +169,55 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:
 
                 Default: any
 
-  <dns0-ip>	IP address of first nameserver.
-		Value gets exported by /proc/net/pnp which is often linked
-		on embedded systems by /etc/resolv.conf.
+  <dns0-ip>	IP address of primary nameserver.
+		Value is exported to /proc/net/pnp with the prefix "nameserver "
+		(see below).
+
+		Default: None if not using autoconfiguration; determined
+		automatically if using autoconfiguration.
+
+  <dns1-ip>	IP address of secondary nameserver.
+		See <dns0-ip>.
+
+  <ntp0-ip>	IP address of a Network Time Protocol (NTP) server.
+		Value is exported to /proc/net/ipconfig/ntp_servers, but is
+		otherwise unused (see below).
+
+		Default: None if not using autoconfiguration; determined
+		automatically if using autoconfiguration.
+
+  After configuration (whether manual or automatic) is complete, two files
+  are created in the following format; lines are omitted if their respective
+  value is empty following configuration:
+
+  - /proc/net/pnp:
+
+	#PROTO: <DHCP|BOOTP|RARP|MANUAL>	(depending on configuration method)
+	domain <dns-domain>			(if autoconfigured, the DNS domain)
+	nameserver <dns0-ip>			(primary name server IP)
+	nameserver <dns1-ip>			(secondary name server IP)
+	nameserver <dns2-ip>			(tertiary name server IP)
+	bootserver <server-ip>			(NFS server IP)
+
+  - /proc/net/ipconfig/ntp_servers:
+
+	<ntp0-ip>				(NTP server IP)
+	<ntp1-ip>				(NTP server IP)
+	<ntp2-ip>				(NTP server IP)
+
+  <dns-domain> and <dns2-ip> (in /proc/net/pnp) and <ntp1-ip> and <ntp2-ip>
+  (in /proc/net/ipconfig/ntp_servers) are requested during autoconfiguration;
+  they cannot be specified as part of the "ip=" kernel command line parameter.
+
+  Because the "domain" and "nameserver" options are recognised by DNS
+  resolvers, /etc/resolv.conf is often linked to /proc/net/pnp on systems
+  that use an NFS root filesystem.
 
-  <dns1-ip>	IP address of second nameserver.
-		Same as above.
+  Note that the kernel will not synchronise the system time with any NTP
+  servers it discovers; this is the responsibility of a user space process
+  (e.g. an initrd/initramfs script that passes the IP addresses listed in
+  /proc/net/ipconfig/ntp_servers to an NTP client before mounting the real
+  root filesystem if it is on NFS).
 
 
 nfsrootdebug