Merge tag 'asoc-v4.7' into asoc-linus

ASoC: Updates for v4.7

The updates this time around are almost all driver code:

 - Further slow progress on the topology code.
 - Substantial updates and improvements for the da7219, es8328, fsl-ssi
   Intel and rcar drivers.

# gpg: Signature made Mon 16 May 2016 12:08:43 BST using RSA key ID 5D5487D0
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3F25 68AA C269 98F9 E813  A1C5 C3F4 36CA 30F5 D8EB
#      Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2  9FEA 24D6 8B72 5D54 87D0

3 files changed, 71 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
new file mode 100644
index 0000000000000..55b53e1fd72c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
@@ -0,0 +1,51 @@
+Texas Instruments DaVinci McBSP module
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
+audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
+
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+- compatible :
+        "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
+
+- reg : physical base address and length of the controller memory mapped
+        region(s).
+- reg-names : Should contain:
+        * "mpu" for the main registers (required).
+        * "dat" for the data FIFO (optional).
+
+- dmas: three element list of DMA controller phandles, DMA request line and
+	TC channel ordered triplets.
+- dma-names: identifier string for each DMA request line in the dmas property.
+	These strings correspond 1:1 with the ordered pairs in dmas. The dma
+	identifiers must be "rx" and "tx".
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+- interrupts : Interrupt numbers for McBSP
+- interrupt-names : Known interrupt names are "rx" and "tx"
+
+- pinctrl-0: Should specify pin control group used for this controller.
+- pinctrl-names: Should contain only one value - "default", for more details
+        please refer to pinctrl-bindings.txt
+
+Example (AM1808):
+~~~~~~~~~~~~~~~~~
+
+mcbsp0: mcbsp@1d10000 {
+	compatible = "ti,da850-mcbsp";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp0_pins>;
+
+	reg = 	<0x00110000 0x1000>,
+		<0x00310000 0x1000>;
+	reg-names = "mpu", "dat";
+	interrupts = <97 98>;
+	interrupts-names = "rx", "tx";
+	dmas = <&edma0 3 1
+		&edma0 2 1>;
+	dma-names = "tx", "rx";
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
index 044e5d76e2dd3..740b467adf7d1 100644
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -7,8 +7,8 @@ codec/DSP interfaces.
 
 Required properties:
 
-  - compatible		: Compatible list, contains "fsl,vf610-sai" or
-			  "fsl,imx6sx-sai".
+  - compatible		: Compatible list, contains "fsl,vf610-sai",
+			  "fsl,imx6sx-sai" or "fsl,imx6ul-sai"
 
   - reg			: Offset and length of the register set for the device.
 
@@ -48,6 +48,11 @@ Required properties:
 			  receive data by following their own bit clocks and
 			  frame sync clocks separately.
 
+Optional properties (for mx6ul):
+
+  - fsl,sai-mclk-direction-output: This is a boolean property. If present,
+			 indicates that SAI will output the SAI MCLK clock.
+
 Note:
 - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
   default synchronous mode (sync Rx with Tx) will be used, which means both
diff --git a/Documentation/devicetree/bindings/sound/pcm5102a.txt b/Documentation/devicetree/bindings/sound/pcm5102a.txt
new file mode 100644
index 0000000000000..c63ab0b6ee196
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm5102a.txt
@@ -0,0 +1,13 @@
+PCM5102a audio CODECs
+
+These devices does not use I2C or SPI.
+
+Required properties:
+
+  - compatible : set as "ti,pcm5102a"
+
+Examples:
+
+	pcm5102a: pcm5102a {
+		compatible = "ti,pcm5102a";
+	};