Merge branch 'topic/drvdata-fix' into topic/asoc

10 files changed, 471 insertions, 22 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 8918a32c6b3a5..b1eb661e6302a 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF     $@
 	$(call cmd,db2pdf)
 
 
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
 build_main_index = rm -rf $(main_idx) && \
 		   echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \
 	$(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
 	$(patsubst %.xml, %.html, $(DOCBOOKS)) \
 	$(patsubst %.xml, %.9,    $(DOCBOOKS)) \
-	$(C-procfs-example)
+	$(C-procfs-example) $(index)
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 76efe5b71d7d8..3120f8dd2c316 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -512,16 +512,24 @@ locking rules:
 		BKL	mmap_sem	PageLocked(page)
 open:		no	yes
 close:		no	yes
-fault:		no	yes
-page_mkwrite:	no	yes		no
+fault:		no	yes		can return with page locked
+page_mkwrite:	no	yes		can return with page locked
 access:		no	yes
 
-	->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+	->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+	->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
 
 	->access() is called when get_user_pages() fails in
 acces_process_vm(), typically used to debug a process through
diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt
new file mode 100644
index 0000000000000..5e22dcf6d48d1
--- /dev/null
+++ b/Documentation/input/bcm5974.txt
@@ -0,0 +1,65 @@
+BCM5974 Driver (bcm5974)
+------------------------
+	Copyright (C) 2008-2009	Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+	Copyright (C) 2008	Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+	Copyright (C) 2001-2004	Greg Kroah-Hartman (greg@kroah.com)
+	Copyright (C) 2005	Johannes Berg (johannes@sipsolutions.net)
+	Copyright (C) 2005	Stelian Pop (stelian@popies.net)
+	Copyright (C) 2005	Frank Arnold (frank@scirocco-5v-turbo.de)
+	Copyright (C) 2005	Peter Osterlund (petero2@telia.com)
+	Copyright (C) 2005	Michael Hanselmann (linux-kernel@hansmi.ch)
+	Copyright (C) 2006	Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
new file mode 100644
index 0000000000000..9f09557aea39c
--- /dev/null
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -0,0 +1,140 @@
+Multi-touch (MT) Protocol
+-------------------------
+	Copyright (C) 2009	Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. The end of multi-touch
+transfer is marked by calling the usual input_sync() function.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation.  The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
+more granular information may specify general shapes as blobs, i.e., as a
+sequence of rectangular shapes grouped together by an
+ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
+whether the touching tool is a finger or a pen or something else.
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted.
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same.
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular.
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe half a revolution
+clockwise around the touch center. The scale of the value is arbitrary, but
+zero should be returned for an ellipse aligned along the Y axis of the
+surface. As an example, an index finger placed straight onto the axis could
+return zero orientation, something negative when twisted to the left, and
+something positive when twisted to the right. This value can be omitted if
+the touching object is circular, or if the information is not available in
+the kernel driver.
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level contactID, explained below. Most kernel drivers will
+not have this capability, and can safely omit the event.
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique contactID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the contactID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the synaptics X driver, and in addition
+implement more advanced gestures.
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
index 9fee5f2e5c627..5a2d69989a8c0 100644
--- a/Documentation/isdn/00-INDEX
+++ b/Documentation/isdn/00-INDEX
@@ -2,8 +2,14 @@
 	- this file (info on ISDN implementation for Linux)
 CREDITS
 	- list of the kind folks that brought you this stuff.
+HiSax.cert
+	- information about the ITU approval certification of the HiSax driver.
 INTERFACE
-	- description of Linklevel and Hardwarelevel ISDN interface.
+	- description of isdn4linux Link Level and Hardware Level interfaces.
+INTERFACE.fax
+	- description of the fax subinterface of isdn4linux.
+INTERFACE.CAPI
+	- description of kernel CAPI Link Level to Hardware Level interface.
 README
 	- general info on what you need and what to do for Linux ISDN.
 README.FAQ
@@ -12,6 +18,8 @@ README.audio
 	- info for running audio over ISDN.
 README.fax
 	- info for using Fax over ISDN.
+README.gigaset
+	- info on the drivers for Siemens Gigaset ISDN adapters.
 README.icn
 	- info on the ICN-ISDN-card and its driver.
 README.HiSax
@@ -37,7 +45,8 @@ README.diversion
 README.sc
 	- info on driver for Spellcaster cards.
 README.x25
-    _ info for running X.25 over ISDN.
+	- info for running X.25 over ISDN.
 README.hysdn
-        - info on driver for Hypercope active HYSDN cards
- 
+	- info on driver for Hypercope active HYSDN cards
+README.mISDN
+	- info on the Modular ISDN subsystem (mISDN).
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
new file mode 100644
index 0000000000000..786d619b36e51
--- /dev/null
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -0,0 +1,213 @@
+Kernel CAPI Interface to Hardware Drivers
+-----------------------------------------
+
+1. Overview
+
+From the CAPI 2.0 specification:
+COMMON-ISDN-API (CAPI) is an application programming interface standard used
+to access ISDN equipment connected to basic rate interfaces (BRI) and primary
+rate interfaces (PRI).
+
+Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
+hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
+lingo) with Kernel CAPI to indicate their readiness to provide their service
+to CAPI applications. CAPI applications also register with Kernel CAPI,
+requesting association with a CAPI device. Kernel CAPI then dispatches the
+application registration to an available device, forwarding it to the
+corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
+directions between the application and the hardware driver.
+
+Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
+This standard is freely available from http://www.capi.org.
+
+
+2. Driver and Device Registration
+
+CAPI drivers optionally register themselves with Kernel CAPI by calling the
+Kernel CAPI function register_capi_driver() with a pointer to a struct
+capi_driver. This structure must be filled with the name and revision of the
+driver, and optionally a pointer to a callback function, add_card(). The
+registration can be revoked by calling the function unregister_capi_driver()
+with a pointer to the same struct capi_driver.
+
+CAPI drivers must register each of the ISDN devices they control with Kernel
+CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
+struct capi_ctr before they can be used. This structure must be filled with
+the names of the driver and controller, and a number of callback function
+pointers which are subsequently used by Kernel CAPI for communicating with the
+driver. The registration can be revoked by calling the function
+detach_capi_ctr() with a pointer to the same struct capi_ctr.
+
+Before the device can be actually used, the driver must fill in the device
+information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
+structure of the device, and signal its readiness by calling capi_ctr_ready().
+From then on, Kernel CAPI may call the registered callback functions for the
+device.
+
+If the device becomes unusable for any reason (shutdown, disconnect ...), the
+driver has to call capi_ctr_reseted(). This will prevent further calls to the
+callback functions by Kernel CAPI.
+
+
+3. Application Registration and Communication
+
+Kernel CAPI forwards registration requests from applications (calls to CAPI
+operation CAPI_REGISTER) to an appropriate hardware driver by calling its
+register_appl() callback function. A unique Application ID (ApplID, u16) is
+allocated by Kernel CAPI and passed to register_appl() along with the
+parameter structure provided by the application. This is analogous to the
+open() operation on regular files or character devices.
+
+After a successful return from register_appl(), CAPI messages from the
+application may be passed to the driver for the device via calls to the
+send_message() callback function. The CAPI message to send is stored in the
+data portion of an skb. Conversely, the driver may call Kernel CAPI's
+capi_ctr_handle_message() function to pass a received CAPI message to Kernel
+CAPI for forwarding to an application, specifying its ApplID.
+
+Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
+forwarded as calls to the release_appl() callback function, passing the same
+ApplID as with register_appl(). After return from release_appl(), no CAPI
+messages for that application may be passed to or from the device anymore.
+
+
+4. Data Structures
+
+4.1 struct capi_driver
+
+This structure describes a Kernel CAPI driver itself. It is used in the
+register_capi_driver() and unregister_capi_driver() functions, and contains
+the following non-private fields, all to be set by the driver before calling
+register_capi_driver():
+
+char name[32]
+	the name of the driver, as a zero-terminated ASCII string
+char revision[32]
+	the revision number of the driver, as a zero-terminated ASCII string
+int (*add_card)(struct capi_driver *driver, capicardparams *data)
+	a callback function pointer (may be NULL)
+
+
+4.2 struct capi_ctr
+
+This structure describes an ISDN device (controller) handled by a Kernel CAPI
+driver. After registration via the attach_capi_ctr() function it is passed to
+all controller specific lower layer interface and callback functions to
+identify the controller to operate on.
+
+It contains the following non-private fields:
+
+- to be set by the driver before calling attach_capi_ctr():
+
+struct module *owner
+	pointer to the driver module owning the device
+
+void *driverdata
+	an opaque pointer to driver specific data, not touched by Kernel CAPI
+
+char name[32]
+	the name of the controller, as a zero-terminated ASCII string
+
+char *driver_name
+	the name of the driver, as a zero-terminated ASCII string
+
+int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
+	(optional) pointer to a callback function for sending firmware and
+	configuration data to the device
+
+void (*reset_ctr)(struct capi_ctr *ctrlr)
+	pointer to a callback function for performing a reset on the device,
+	releasing all registered applications
+
+void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
+			capi_register_params *rparam)
+void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
+	pointers to callback functions for registration and deregistration of
+	applications with the device
+
+u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
+	pointer to a callback function for sending a CAPI message to the
+	device
+
+char *(*procinfo)(struct capi_ctr *ctrlr)
+	pointer to a callback function returning the entry for the device in
+	the CAPI controller info table, /proc/capi/controller
+
+read_proc_t *ctr_read_proc
+	pointer to the read_proc callback function for the device's proc file
+	system entry, /proc/capi/controllers/<n>; will be called with a
+	pointer to the device's capi_ctr structure as the last (data) argument
+
+- to be filled in before calling capi_ctr_ready():
+
+u8 manu[CAPI_MANUFACTURER_LEN]
+	value to return for CAPI_GET_MANUFACTURER
+
+capi_version version
+	value to return for CAPI_GET_VERSION
+
+capi_profile profile
+	value to return for CAPI_GET_PROFILE
+
+u8 serial[CAPI_SERIAL_LEN]
+	value to return for CAPI_GET_SERIAL
+
+
+5. Lower Layer Interface Functions
+
+(declared in <linux/isdn/capilli.h>)
+
+void register_capi_driver(struct capi_driver *drvr)
+void unregister_capi_driver(struct capi_driver *drvr)
+	register/unregister a driver with Kernel CAPI
+
+int attach_capi_ctr(struct capi_ctr *ctrlr)
+int detach_capi_ctr(struct capi_ctr *ctrlr)
+	register/unregister a device (controller) with Kernel CAPI
+
+void capi_ctr_ready(struct capi_ctr *ctrlr)
+void capi_ctr_reseted(struct capi_ctr *ctrlr)
+	signal controller ready/not ready
+
+void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
+void capi_ctr_resume_output(struct capi_ctr *ctrlr)
+	signal suspend/resume
+
+void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
+				struct sk_buff *skb)
+	pass a received CAPI message to Kernel CAPI
+	for forwarding to the specified application
+
+
+6. Helper Functions and Macros
+
+Library functions (from <linux/isdn/capilli.h>):
+
+void capilib_new_ncci(struct list_head *head, u16 applid,
+			u32 ncci, u32 winsize)
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
+void capilib_release_appl(struct list_head *head, u16 applid)
+void capilib_release(struct list_head *head)
+void capilib_data_b3_conf(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+u16  capilib_data_b3_req(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+
+
+Macros to extract/set element values from/in a CAPI message header
+(from <linux/isdn/capiutil.h>):
+
+Get Macro		Set Macro			Element (Type)
+
+CAPIMSG_LEN(m)		CAPIMSG_SETLEN(m, len)		Total Length (u16)
+CAPIMSG_APPID(m)	CAPIMSG_SETAPPID(m, applid)	ApplID (u16)
+CAPIMSG_COMMAND(m)	CAPIMSG_SETCOMMAND(m,cmd)	Command (u8)
+CAPIMSG_SUBCOMMAND(m)	CAPIMSG_SETSUBCOMMAND(m, cmd)	Subcommand (u8)
+CAPIMSG_CMD(m)		-				Command*256
+							+ Subcommand (u16)
+CAPIMSG_MSGID(m)	CAPIMSG_SETMSGID(m, msgid)	Message Number (u16)
+
+CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
+							(u32)
+CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
+
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 026ec7d573840..4d04572b6549e 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants.
 
 Inside a struct description, you can use the "private:" and "public:"
 comment tags.  Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation.  The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker.  They may optionally include comments between the ":" and the
+ending "*/" marker.
 
 Example:
 
@@ -283,7 +286,7 @@ Example:
 struct my_struct {
     int a;
     int b;
-/* private: */
+/* private: internal use only */
     int c;
 };
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 90b3924071b6c..e87bdbfbcc75e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
 
 	usbcore.blinkenlights=1
 
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+	log_buf_len=1M print-fatal-signals=1
+can also be entered as
+	log-buf-len=1M print_fatal_signals=1
+
+
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
 module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,i386] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			to discrete, to make X server driver able to add WB
 			entry later. This parameter enables that.
 
-	enable_timer_pin_1 [i386,x86-64]
+	enable_timer_pin_1 [X86]
 			Enable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs
 			(in particular on some ATI chipsets).
@@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
-			for IA-64, off otherwise.
+			for 64bit NUMA, off otherwise.
 			Format: 0 | 1 (for off | on)
 
 	hcl=		[IA-64] SGI's Hardware Graph compatibility layer
diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt
index 938ea22f2cc09..e20d913d5914a 100644
--- a/Documentation/lockdep-design.txt
+++ b/Documentation/lockdep-design.txt
@@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
 The bit position indicates STATE, STATE-read, for each of the states listed
 above, and the character displayed in each indicates:
 
-   '.'  acquired while irqs disabled
-   '+'  acquired in irq context
-   '-'  acquired with irqs enabled
+   '.'  acquired while irqs disabled and not in irq context
+   '-'  acquired in irq context
+   '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
 
 Unused mutexes cannot be part of the cause of an error.
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 97c4b3284329b..b716d33912d8a 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -90,6 +90,10 @@ will itself start writeback.
 If dirty_bytes is written, dirty_ratio becomes a function of its value
 (dirty_bytes / the amount of dirtyable system memory).
 
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
 ==============================================================
 
 dirty_expire_centisecs