Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal updates from Zhang Rui:

 - Fix a regression where bogus trip points on some Lenovo laptops start
   to screw up thermal control after commit 81ad4276b505 ("Thermal:
   initialize thermal zone device correctly").

   On these Lenovo laptops, a bogus passive trip point is reported,
   which is 0 degree Celsius.  Without commit 81ad4276b505, thermal zone
   fails to set cooling devices to proper cooling state, which is a bug.
   But with commit 81ad4276b505 applied, the processors are always
   throttled on these Lenovo laptops because the current temperature is
   always higher than the passive trip point.

   Fix things to ignore such bogus trip points.  (Zhang Rui)

 - Introduce Mediatek thermal driver.  (Sascha Hauer)

 - Introduce devm_ versions of OF thermal sensor register API.  (Laxman
   Dewangan)

 - Changes in Kconfigs to allow compile test on UM arch.  (Krzysztof
   Kozlowski)

 - Introduce Skylake support in intel_pch_thermal driver.  (Srinivas
   Pandruvada)

 - Several small fixes on Rockchip, TI-SoC, Tegra, RCar, and Exynos
   thermal drivers.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (26 commits)
  Thermal: Ignore invalid trip points
  thermal: trace: migrating thermal traces to use TRACE_DEFINE_ENUM() macros
  thermal: intel_pch_thermal: Enable Skylake PCH thermal
  thermal: doc: Add details of devm_thermal_zone_of_sensor_{register,unregister}
  thermal: of-thermal: Add devm version of thermal_zone_of_sensor_register
  thermal: doc: Add details of thermal_zone_of_sensor_{register,unregister}
  thermal: exynos: Defer probe if vtmu is present but not registered
  thermal: exynos: Use devm_regulator_get_optional() for vtmu
  thermal: exynos: List vtmu-supply as optional property in DT binding
  thermal: exynos: Print a message about exceeded number of supported trip-points
  thermal: exynos: Document number of supported trip-points
  thermal: exynos: Document compatible for Exynos5433 TMU
  thermal: mtk: allow compile testing on UM
  thermal: tegra_soctherm: fix sign bit of temperature
  thermal: Fix build error of missing devm_ioremap_resource on UM
  thermal: ti-soc-thermal: clean up the error handling a bit
  thermal: rcar: Use ARCH_RENESAS
  thermal: rcar_thermal: don't open code of_device_get_match_data()
  thermal: db8500_cpufreq_cooling: Compile with COMPILE_TEST
  thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399
  ...

3 files changed, 126 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 695150a4136bb..70b4c16c7ed83 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -11,6 +11,7 @@
 	       "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
 	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
 			Exynos5420 (Must pass triminfo base and triminfo clock)
+               "samsung,exynos5433-tmu"
 	       "samsung,exynos5440-tmu"
 	       "samsung,exynos7-tmu"
 - interrupt-parent : The phandle for the interrupt controller
@@ -40,9 +41,14 @@
 		for current TMU channel
 	-- "tmu_sclk" clock for functional operation of the current TMU
 		channel
-- vtmu-supply: This entry is optional and provides the regulator node supplying
-		voltage to TMU. If needed this entry can be placed inside
-		board/platform specific dts file.
+
+The Exynos TMU supports generating interrupts when reaching given
+temperature thresholds. Number of supported thermal trip points depends
+on the SoC (only first trip points defined in DT will be configured):
+ - most of SoC: 4
+ - samsung,exynos5433-tmu: 8
+ - samsung,exynos7-tmu: 8
+
 Following properties are mandatory (depending on SoC):
 - samsung,tmu_gain: Gain value for internal TMU operation.
 - samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
@@ -56,6 +62,12 @@ Following properties are mandatory (depending on SoC):
 - samsung,tmu_default_temp_offset: Default temperature offset
 - samsung,tmu_cal_type: Callibration type
 
+** Optional properties:
+
+- vtmu-supply: This entry is optional and provides the regulator node supplying
+		voltage to TMU. If needed this entry can be placed inside
+		board/platform specific dts file.
+
 Example 1):
 
 	tmu@100C0000 {
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
new file mode 100644
index 0000000000000..81f9a512bc2a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -0,0 +1,43 @@
+* Mediatek Thermal
+
+This describes the device tree binding for the Mediatek thermal controller
+which measures the on-SoC temperatures. This device does not have its own ADC,
+instead it directly controls the AUXADC via AHB bus accesses. For this reason
+this device needs phandles to the AUXADC. Also it controls a mux in the
+apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
+is also needed.
+
+Required properties:
+- compatible: "mediatek,mt8173-thermal"
+- reg: Address range of the thermal controller
+- interrupts: IRQ for the thermal controller
+- clocks, clock-names: Clocks needed for the thermal controller. required
+                       clocks are:
+		       "therm":	 Main clock needed for register access
+		       "auxadc": The AUXADC clock
+- resets: Reference to the reset controller controlling the thermal controller.
+- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
+- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
+- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description.
+
+Optional properties:
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+               unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
+
+Example:
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt8173-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration_data>;
+		nvmem-cell-names = "calibration-data";
+	};
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 8c745c8931da0..ed419d6c8dec8 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -72,6 +72,74 @@ temperature) and throttle appropriate devices.
     It deletes the corresponding entry form /sys/class/thermal folder and
     unbind all the thermal cooling devices it uses.
 
+1.1.3 struct thermal_zone_device *thermal_zone_of_sensor_register(
+		struct device *dev, int sensor_id, void *data,
+		const struct thermal_zone_of_device_ops *ops)
+
+	This interface adds a new sensor to a DT thermal zone.
+	This function will search the list of thermal zones described in
+	device tree and look for the zone that refer to the sensor device
+	pointed by dev->of_node as temperature providers. For the zone
+	pointing to the sensor node, the sensor will be added to the DT
+	thermal zone device.
+
+	The parameters for this interface are:
+	dev:		Device node of sensor containing valid node pointer in
+			dev->of_node.
+	sensor_id:	a sensor identifier, in case the sensor IP has more
+			than one sensors
+	data:		a private pointer (owned by the caller) that will be
+			passed back, when a temperature reading is needed.
+	ops:		struct thermal_zone_of_device_ops *.
+
+			get_temp:	a pointer to a function that reads the
+					sensor temperature. This is mandatory
+					callback provided by sensor driver.
+			get_trend: 	a pointer to a function that reads the
+					sensor temperature trend.
+			set_emul_temp:	a pointer to a function that sets
+					sensor emulated temperature.
+	The thermal zone temperature is provided by the get_temp() function
+	pointer of thermal_zone_of_device_ops. When called, it will
+	have the private pointer @data back.
+
+	It returns error pointer if fails otherwise valid thermal zone device
+	handle. Caller should check the return handle with IS_ERR() for finding
+	whether success or not.
+
+1.1.4 void thermal_zone_of_sensor_unregister(struct device *dev,
+		struct thermal_zone_device *tzd)
+
+	This interface unregisters a sensor from a DT thermal zone which was
+	successfully added by interface thermal_zone_of_sensor_register().
+	This function removes the sensor callbacks and private data from the
+	thermal zone device registered with thermal_zone_of_sensor_register()
+	interface. It will also silent the zone by remove the .get_temp() and
+	get_trend() thermal zone device callbacks.
+
+1.1.5 struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
+		struct device *dev, int sensor_id,
+		void *data, const struct thermal_zone_of_device_ops *ops)
+
+	This interface is resource managed version of
+	thermal_zone_of_sensor_register().
+	All details of thermal_zone_of_sensor_register() described in
+	section 1.1.3 is applicable here.
+	The benefit of using this interface to register sensor is that it
+	is not require to explicitly call thermal_zone_of_sensor_unregister()
+	in error path or during driver unbinding as this is done by driver
+	resource manager.
+
+1.1.6 void devm_thermal_zone_of_sensor_unregister(struct device *dev,
+		struct thermal_zone_device *tzd)
+
+	This interface is resource managed version of
+	thermal_zone_of_sensor_unregister().
+	All details of thermal_zone_of_sensor_unregister() described in
+	section 1.1.4 is applicable here.
+	Normally this function will not need to be called and the resource
+	management code will ensure that the resource is freed.
+
 1.2 thermal cooling device interface
 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
 		void *devdata, struct thermal_cooling_device_ops *)