libata-sff: separate out BMDMA EH

Some of error handling logic in ata_sff_error_handler() and all of
ata_sff_post_internal_cmd() are for BMDMA.  Create
ata_bmdma_error_handler() and ata_bmdma_post_internal_cmd() and move
BMDMA part into those.

While at it, change DMA protocol check to ata_is_dma(), fix
post_internal_cmd to call ap->ops->bmdma_stop instead of directly
calling ata_bmdma_stop() and open code hardreset selection so that
ata_std_error_handler() doesn't have to know about sff hardreset.

As these two functions are BMDMA specific, there's no reason to check
for bmdma_addr before calling bmdma methods if the protocol of the
failed command is DMA.  sata_mv and pata_mpc52xx now don't need to set
.post_internal_cmd to ATA_OP_NULL and pata_icside and sata_qstor don't
need to set it to their bmdma_stop routines.

ata_sff_post_internal_cmd() becomes noop and is removed.

This fixes p3 described in clean-up-BMDMA-initialization patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 0 insertions, 1 deletions

diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index ee85a9ce0a11d..b56e8f722d208 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -333,7 +333,6 @@ static struct ata_port_operations pata_icside_port_ops = {
 	.cable_detect		= ata_cable_40wire,
 	.set_dmamode		= pata_icside_set_dmamode,
 	.postreset		= pata_icside_postreset,
-	.post_internal_cmd	= pata_icside_bmdma_stop,
 
 	.port_start		= ATA_OP_NULL,	/* don't need PRD table */
 };