Merge branch 'sched/urgent' into sched/core, to avoid conflicts

Signed-off-by: Ingo Molnar <mingo@kernel.org>

20 files changed, 450 insertions, 366 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 1386749b48ffd..6e9f74a5c0950 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -40,7 +40,7 @@ config SGI_MBCS
 source "drivers/tty/serial/Kconfig"
 
 config TTY_PRINTK
-	bool "TTY driver to output user messages via printk"
+	tristate "TTY driver to output user messages via printk"
 	depends on EXPERT && TTY
 	default n
 	---help---
@@ -408,7 +408,7 @@ config APPLICOM
 
 config SONYPI
 	tristate "Sony Vaio Programmable I/O Control Device support"
-	depends on X86 && PCI && INPUT && !64BIT
+	depends on X86_32 && PCI && INPUT
 	---help---
 	  This driver enables access to the Sony Programmable I/O Control
 	  Device which can be found in many (all ?) Sony Vaio laptops.
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 2f2b08457c673..244759bbd7b73 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -342,11 +342,11 @@ config HW_RANDOM_TPM
 	  If unsure, say Y.
 
 config HW_RANDOM_MSM
-	tristate "Qualcomm MSM Random Number Generator support"
-	depends on HW_RANDOM && ARCH_MSM
+	tristate "Qualcomm SoCs Random Number Generator support"
+	depends on HW_RANDOM && ARCH_QCOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on Qualcomm MSM SoCs.
+	  Generator hardware found on Qualcomm SoCs.
 
 	  To compile this driver as a module, choose M here. the
 	  module will be called msm-rng.
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index bf9fc6b79328c..851bc7e20ad26 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -54,29 +54,22 @@ static int atmel_trng_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EINVAL;
-
 	trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
 	if (!trng)
 		return -ENOMEM;
 
-	if (!devm_request_mem_region(&pdev->dev, res->start,
-				     resource_size(res), pdev->name))
-		return -EBUSY;
-
-	trng->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!trng->base)
-		return -EBUSY;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	trng->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(trng->base))
+		return PTR_ERR(trng->base);
 
-	trng->clk = clk_get(&pdev->dev, NULL);
+	trng->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(trng->clk))
 		return PTR_ERR(trng->clk);
 
 	ret = clk_enable(trng->clk);
 	if (ret)
-		goto err_enable;
+		return ret;
 
 	writel(TRNG_KEY | 1, trng->base + TRNG_CR);
 	trng->rng.name = pdev->name;
@@ -92,9 +85,6 @@ static int atmel_trng_probe(struct platform_device *pdev)
 
 err_register:
 	clk_disable(trng->clk);
-err_enable:
-	clk_put(trng->clk);
-
 	return ret;
 }
 
@@ -106,7 +96,6 @@ static int atmel_trng_remove(struct platform_device *pdev)
 
 	writel(TRNG_KEY, trng->base + TRNG_CR);
 	clk_disable(trng->clk);
-	clk_put(trng->clk);
 
 	return 0;
 }
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index 8c3b255e629a8..e900961cdd2e8 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -61,18 +61,18 @@ static int bcm2835_rng_probe(struct platform_device *pdev)
 	}
 	bcm2835_rng_ops.priv = (unsigned long)rng_base;
 
+	/* set warm-up count & enable */
+	__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
+	__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
+
 	/* register driver */
 	err = hwrng_register(&bcm2835_rng_ops);
 	if (err) {
 		dev_err(dev, "hwrng registration failed\n");
 		iounmap(rng_base);
-	} else {
+	} else
 		dev_info(dev, "hwrng registered\n");
 
-		/* set warm-up count & enable */
-		__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
-		__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
-	}
 	return err;
 }
 
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index b9495a8c05c6d..334601cc81cf5 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -40,6 +40,7 @@
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/random.h>
 #include <asm/uaccess.h>
 
 
@@ -301,9 +302,10 @@ err_misc_dereg:
 
 int hwrng_register(struct hwrng *rng)
 {
-	int must_register_misc;
 	int err = -EINVAL;
 	struct hwrng *old_rng, *tmp;
+	unsigned char bytes[16];
+	int bytes_read;
 
 	if (rng->name == NULL ||
 	    (rng->data_read == NULL && rng->read == NULL))
@@ -326,7 +328,6 @@ int hwrng_register(struct hwrng *rng)
 			goto out_unlock;
 	}
 
-	must_register_misc = (current_rng == NULL);
 	old_rng = current_rng;
 	if (!old_rng) {
 		err = hwrng_init(rng);
@@ -335,18 +336,20 @@ int hwrng_register(struct hwrng *rng)
 		current_rng = rng;
 	}
 	err = 0;
-	if (must_register_misc) {
+	if (!old_rng) {
 		err = register_miscdev();
 		if (err) {
-			if (!old_rng) {
-				hwrng_cleanup(rng);
-				current_rng = NULL;
-			}
+			hwrng_cleanup(rng);
+			current_rng = NULL;
 			goto out_unlock;
 		}
 	}
 	INIT_LIST_HEAD(&rng->list);
 	list_add_tail(&rng->list, &rng_list);
+
+	bytes_read = rng_get_data(rng, bytes, sizeof(bytes), 1);
+	if (bytes_read > 0)
+		add_device_randomness(bytes, bytes_read);
 out_unlock:
 	mutex_unlock(&rng_mutex);
 out:
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index 00e9d2d466343..9c85815772464 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -43,7 +43,7 @@ static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
 	void __iomem *base;
 	int ret;
 
-	rng_clk = clk_get(&dev->dev, NULL);
+	rng_clk = devm_clk_get(&dev->dev, NULL);
 	if (IS_ERR(rng_clk)) {
 		dev_err(&dev->dev, "could not get rng clock\n");
 		ret = PTR_ERR(rng_clk);
@@ -56,33 +56,28 @@ static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
 	if (ret)
 		goto out_clk;
 	ret = -ENOMEM;
-	base = ioremap(dev->res.start, resource_size(&dev->res));
+	base = devm_ioremap(&dev->dev, dev->res.start,
+			    resource_size(&dev->res));
 	if (!base)
 		goto out_release;
 	nmk_rng.priv = (unsigned long)base;
 	ret = hwrng_register(&nmk_rng);
 	if (ret)
-		goto out_unmap;
+		goto out_release;
 	return 0;
 
-out_unmap:
-	iounmap(base);
 out_release:
 	amba_release_regions(dev);
 out_clk:
 	clk_disable(rng_clk);
-	clk_put(rng_clk);
 	return ret;
 }
 
 static int nmk_rng_remove(struct amba_device *dev)
 {
-	void __iomem *base = (void __iomem *)nmk_rng.priv;
 	hwrng_unregister(&nmk_rng);
-	iounmap(base);
 	amba_release_regions(dev);
 	clk_disable(rng_clk);
-	clk_put(rng_clk);
 	return 0;
 }
 
diff --git a/drivers/char/hw_random/omap3-rom-rng.c b/drivers/char/hw_random/omap3-rom-rng.c
index c853e9e685737..6f2eaffed623a 100644
--- a/drivers/char/hw_random/omap3-rom-rng.c
+++ b/drivers/char/hw_random/omap3-rom-rng.c
@@ -103,7 +103,7 @@ static int omap3_rom_rng_probe(struct platform_device *pdev)
 	}
 
 	setup_timer(&idle_timer, omap3_rom_rng_idle, 0);
-	rng_clk = clk_get(&pdev->dev, "ick");
+	rng_clk = devm_clk_get(&pdev->dev, "ick");
 	if (IS_ERR(rng_clk)) {
 		pr_err("unable to get RNG clock\n");
 		return PTR_ERR(rng_clk);
@@ -120,7 +120,6 @@ static int omap3_rom_rng_remove(struct platform_device *pdev)
 {
 	hwrng_unregister(&omap3_rom_rng_ops);
 	clk_disable_unprepare(rng_clk);
-	clk_put(rng_clk);
 	return 0;
 }
 
diff --git a/drivers/char/hw_random/picoxcell-rng.c b/drivers/char/hw_random/picoxcell-rng.c
index 3d4c2293c6f56..eab5448ad56fb 100644
--- a/drivers/char/hw_random/picoxcell-rng.c
+++ b/drivers/char/hw_random/picoxcell-rng.c
@@ -104,24 +104,11 @@ static int picoxcell_trng_probe(struct platform_device *pdev)
 	int ret;
 	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	if (!mem) {
-		dev_warn(&pdev->dev, "no memory resource\n");
-		return -ENOMEM;
-	}
-
-	if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
-				     "picoxcell_trng")) {
-		dev_warn(&pdev->dev, "unable to request io mem\n");
-		return -EBUSY;
-	}
+	rng_base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(rng_base))
+		return PTR_ERR(rng_base);
 
-	rng_base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
-	if (!rng_base) {
-		dev_warn(&pdev->dev, "unable to remap io mem\n");
-		return -ENOMEM;
-	}
-
-	rng_clk = clk_get(&pdev->dev, NULL);
+	rng_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(rng_clk)) {
 		dev_warn(&pdev->dev, "no clk\n");
 		return PTR_ERR(rng_clk);
@@ -130,7 +117,7 @@ static int picoxcell_trng_probe(struct platform_device *pdev)
 	ret = clk_enable(rng_clk);
 	if (ret) {
 		dev_warn(&pdev->dev, "unable to enable clk\n");
-		goto err_enable;
+		return ret;
 	}
 
 	picoxcell_trng_start();
@@ -145,9 +132,6 @@ static int picoxcell_trng_probe(struct platform_device *pdev)
 
 err_register:
 	clk_disable(rng_clk);
-err_enable:
-	clk_put(rng_clk);
-
 	return ret;
 }
 
@@ -155,7 +139,6 @@ static int picoxcell_trng_remove(struct platform_device *pdev)
 {
 	hwrng_unregister(&picoxcell_trng);
 	clk_disable(rng_clk);
-	clk_put(rng_clk);
 
 	return 0;
 }
diff --git a/drivers/char/hw_random/timeriomem-rng.c b/drivers/char/hw_random/timeriomem-rng.c
index 73ce739f8e196..439ff8b28c439 100644
--- a/drivers/char/hw_random/timeriomem-rng.c
+++ b/drivers/char/hw_random/timeriomem-rng.c
@@ -118,7 +118,8 @@ static int timeriomem_rng_probe(struct platform_device *pdev)
 	}
 
 	/* Allocate memory for the device structure (and zero it) */
-	priv = kzalloc(sizeof(struct timeriomem_rng_private_data), GFP_KERNEL);
+	priv = devm_kzalloc(&pdev->dev,
+			sizeof(struct timeriomem_rng_private_data), GFP_KERNEL);
 	if (!priv) {
 		dev_err(&pdev->dev, "failed to allocate device structure.\n");
 		return -ENOMEM;
@@ -134,17 +135,16 @@ static int timeriomem_rng_probe(struct platform_device *pdev)
 			period = i;
 		else {
 			dev_err(&pdev->dev, "missing period\n");
-			err = -EINVAL;
-			goto out_free;
+			return -EINVAL;
 		}
-	} else
+	} else {
 		period = pdata->period;
+	}
 
 	priv->period = usecs_to_jiffies(period);
 	if (priv->period < 1) {
 		dev_err(&pdev->dev, "period is less than one jiffy\n");
-		err = -EINVAL;
-		goto out_free;
+		return -EINVAL;
 	}
 
 	priv->expires	= jiffies;
@@ -160,24 +160,16 @@ static int timeriomem_rng_probe(struct platform_device *pdev)
 	priv->timeriomem_rng_ops.data_read	= timeriomem_rng_data_read;
 	priv->timeriomem_rng_ops.priv		= (unsigned long)priv;
 
-	if (!request_mem_region(res->start, resource_size(res),
-				dev_name(&pdev->dev))) {
-		dev_err(&pdev->dev, "request_mem_region failed\n");
-		err = -EBUSY;
+	priv->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->io_base)) {
+		err = PTR_ERR(priv->io_base);
 		goto out_timer;
 	}
 
-	priv->io_base = ioremap(res->start, resource_size(res));
-	if (priv->io_base == NULL) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		err = -EIO;
-		goto out_release_io;
-	}
-
 	err = hwrng_register(&priv->timeriomem_rng_ops);
 	if (err) {
 		dev_err(&pdev->dev, "problem registering\n");
-		goto out;
+		goto out_timer;
 	}
 
 	dev_info(&pdev->dev, "32bits from 0x%p @ %dus\n",
@@ -185,30 +177,18 @@ static int timeriomem_rng_probe(struct platform_device *pdev)
 
 	return 0;
 
-out:
-	iounmap(priv->io_base);
-out_release_io:
-	release_mem_region(res->start, resource_size(res));
 out_timer:
 	del_timer_sync(&priv->timer);
-out_free:
-	kfree(priv);
 	return err;
 }
 
 static int timeriomem_rng_remove(struct platform_device *pdev)
 {
 	struct timeriomem_rng_private_data *priv = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	hwrng_unregister(&priv->timeriomem_rng_ops);
 
 	del_timer_sync(&priv->timer);
-	iounmap(priv->io_base);
-	release_mem_region(res->start, resource_size(res));
-	kfree(priv);
 
 	return 0;
 }
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index c12398d1517c5..2ce0e225e58c3 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -47,8 +47,7 @@ static void register_buffer(u8 *buf, size_t size)
 	sg_init_one(&sg, buf, size);
 
 	/* There should always be room for one buffer. */
-	if (virtqueue_add_inbuf(vq, &sg, 1, buf, GFP_KERNEL) < 0)
-		BUG();
+	virtqueue_add_inbuf(vq, &sg, 1, buf, GFP_KERNEL);
 
 	virtqueue_kick(vq);
 }
diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
index 0baa8fab4ea7a..db1c9b7adaa66 100644
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -50,6 +50,18 @@ config IPMI_SI
 	 Currently, only KCS and SMIC are supported.  If
 	 you are using IPMI, you should probably say "y" here.
 
+config IPMI_SI_PROBE_DEFAULTS
+       bool 'Probe for all possible IPMI system interfaces by default'
+       default n
+       depends on IPMI_SI
+       help
+	 Modern systems will usually expose IPMI interfaces via a discoverable
+	 firmware mechanism such as ACPI or DMI. Older systems do not, and so
+	 the driver is forced to probe hardware manually. This may cause boot
+	 delays. Say "n" here to disable this manual probing. IPMI will then
+	 only be available on older systems if the "ipmi_si_intf.trydefaults=1"
+	 boot argument is passed.
+
 config IPMI_WATCHDOG
        tristate 'IPMI Watchdog Timer'
        help
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index f5e4cd7617f68..61e71616689b7 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -352,7 +352,7 @@ static inline void write_all_bytes(struct si_sm_data *bt)
 
 static inline int read_all_bytes(struct si_sm_data *bt)
 {
-	unsigned char i;
+	unsigned int i;
 
 	/*
 	 * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index 6a4bdc18955a5..8c25f596808a9 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -251,8 +251,9 @@ static inline int check_obf(struct si_sm_data *kcs, unsigned char status,
 	if (!GET_STATUS_OBF(status)) {
 		kcs->obf_timeout -= time;
 		if (kcs->obf_timeout < 0) {
-		    start_error_recovery(kcs, "OBF not ready in time");
-		    return 1;
+			kcs->obf_timeout = OBF_RETRY_TIMEOUT;
+			start_error_recovery(kcs, "OBF not ready in time");
+			return 1;
 		}
 		return 0;
 	}
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index ec4e10fcf1a51..e6db9381b2c76 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -55,6 +55,7 @@ static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
 static int ipmi_init_msghandler(void);
 static void smi_recv_tasklet(unsigned long);
 static void handle_new_recv_msgs(ipmi_smi_t intf);
+static void need_waiter(ipmi_smi_t intf);
 
 static int initialized;
 
@@ -73,14 +74,28 @@ static struct proc_dir_entry *proc_ipmi_root;
  */
 #define MAX_MSG_TIMEOUT		60000
 
+/* Call every ~1000 ms. */
+#define IPMI_TIMEOUT_TIME	1000
+
+/* How many jiffies does it take to get to the timeout time. */
+#define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000)
+
+/*
+ * Request events from the queue every second (this is the number of
+ * IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the
+ * future, IPMI will add a way to know immediately if an event is in
+ * the queue and this silliness can go away.
+ */
+#define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME))
+
 /*
  * The main "user" data structure.
  */
 struct ipmi_user {
 	struct list_head link;
 
-	/* Set to "0" when the user is destroyed. */
-	int valid;
+	/* Set to false when the user is destroyed. */
+	bool valid;
 
 	struct kref refcount;
 
@@ -92,7 +107,7 @@ struct ipmi_user {
 	ipmi_smi_t intf;
 
 	/* Does this interface receive IPMI events? */
-	int gets_events;
+	bool gets_events;
 };
 
 struct cmd_rcvr {
@@ -383,6 +398,9 @@ struct ipmi_smi {
 	unsigned int     waiting_events_count; /* How many events in queue? */
 	char             delivering_events;
 	char             event_msg_printed;
+	atomic_t         event_waiters;
+	unsigned int     ticks_to_req_ev;
+	int              last_needs_timer;
 
 	/*
 	 * The event receiver for my BMC, only really used at panic
@@ -395,7 +413,7 @@ struct ipmi_smi {
 
 	/* For handling of maintenance mode. */
 	int maintenance_mode;
-	int maintenance_mode_enable;
+	bool maintenance_mode_enable;
 	int auto_maintenance_timeout;
 	spinlock_t maintenance_mode_lock; /* Used in a timer... */
 
@@ -451,7 +469,6 @@ static DEFINE_MUTEX(ipmi_interfaces_mutex);
 static LIST_HEAD(smi_watchers);
 static DEFINE_MUTEX(smi_watchers_mutex);
 
-
 #define ipmi_inc_stat(intf, stat) \
 	atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat])
 #define ipmi_get_stat(intf, stat) \
@@ -772,6 +789,7 @@ static int intf_next_seq(ipmi_smi_t           intf,
 		*seq = i;
 		*seqid = intf->seq_table[i].seqid;
 		intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ;
+		need_waiter(intf);
 	} else {
 		rv = -EAGAIN;
 	}
@@ -941,7 +959,7 @@ int ipmi_create_user(unsigned int          if_num,
 	new_user->handler = handler;
 	new_user->handler_data = handler_data;
 	new_user->intf = intf;
-	new_user->gets_events = 0;
+	new_user->gets_events = false;
 
 	if (!try_module_get(intf->handlers->owner)) {
 		rv = -ENODEV;
@@ -962,10 +980,15 @@ int ipmi_create_user(unsigned int          if_num,
 	 */
 	mutex_unlock(&ipmi_interfaces_mutex);
 
-	new_user->valid = 1;
+	new_user->valid = true;
 	spin_lock_irqsave(&intf->seq_lock, flags);
 	list_add_rcu(&new_user->link, &intf->users);
 	spin_unlock_irqrestore(&intf->seq_lock, flags);
+	if (handler->ipmi_watchdog_pretimeout) {
+		/* User wants pretimeouts, so make sure to watch for them. */
+		if (atomic_inc_return(&intf->event_waiters) == 1)
+			need_waiter(intf);
+	}
 	*user = new_user;
 	return 0;
 
@@ -1019,7 +1042,13 @@ int ipmi_destroy_user(ipmi_user_t user)
 	struct cmd_rcvr  *rcvr;
 	struct cmd_rcvr  *rcvrs = NULL;
 
-	user->valid = 0;
+	user->valid = false;
+
+	if (user->handler->ipmi_watchdog_pretimeout)
+		atomic_dec(&intf->event_waiters);
+
+	if (user->gets_events)
+		atomic_dec(&intf->event_waiters);
 
 	/* Remove the user from the interface's sequence table. */
 	spin_lock_irqsave(&intf->seq_lock, flags);
@@ -1155,25 +1184,23 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode)
 	if (intf->maintenance_mode != mode) {
 		switch (mode) {
 		case IPMI_MAINTENANCE_MODE_AUTO:
-			intf->maintenance_mode = mode;
 			intf->maintenance_mode_enable
 				= (intf->auto_maintenance_timeout > 0);
 			break;
 
 		case IPMI_MAINTENANCE_MODE_OFF:
-			intf->maintenance_mode = mode;
-			intf->maintenance_mode_enable = 0;
+			intf->maintenance_mode_enable = false;
 			break;
 
 		case IPMI_MAINTENANCE_MODE_ON:
-			intf->maintenance_mode = mode;
-			intf->maintenance_mode_enable = 1;
+			intf->maintenance_mode_enable = true;
 			break;
 
 		default:
 			rv = -EINVAL;
 			goto out_unlock;
 		}
+		intf->maintenance_mode = mode;
 
 		maintenance_mode_update(intf);
 	}
@@ -1184,7 +1211,7 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode)
 }
 EXPORT_SYMBOL(ipmi_set_maintenance_mode);
 
-int ipmi_set_gets_events(ipmi_user_t user, int val)
+int ipmi_set_gets_events(ipmi_user_t user, bool val)
 {
 	unsigned long        flags;
 	ipmi_smi_t           intf = user->intf;
@@ -1194,8 +1221,18 @@ int ipmi_set_gets_events(ipmi_user_t user, int val)
 	INIT_LIST_HEAD(&msgs);
 
 	spin_lock_irqsave(&intf->events_lock, flags);
+	if (user->gets_events == val)
+		goto out;
+
 	user->gets_events = val;
 
+	if (val) {
+		if (atomic_inc_return(&intf->event_waiters) == 1)
+			need_waiter(intf);
+	} else {
+		atomic_dec(&intf->event_waiters);
+	}
+
 	if (intf->delivering_events)
 		/*
 		 * Another thread is delivering events for this, so
@@ -1289,6 +1326,9 @@ int ipmi_register_for_cmd(ipmi_user_t   user,
 		goto out_unlock;
 	}
 
+	if (atomic_inc_return(&intf->event_waiters) == 1)
+		need_waiter(intf);
+
 	list_add_rcu(&rcvr->link, &intf->cmd_rcvrs);
 
  out_unlock:
@@ -1330,6 +1370,7 @@ int ipmi_unregister_for_cmd(ipmi_user_t   user,
 	mutex_unlock(&intf->cmd_rcvrs_mutex);
 	synchronize_rcu();
 	while (rcvrs) {
+		atomic_dec(&intf->event_waiters);
 		rcvr = rcvrs;
 		rcvrs = rcvr->next;
 		kfree(rcvr);
@@ -1535,7 +1576,7 @@ static int i_ipmi_request(ipmi_user_t          user,
 				= IPMI_MAINTENANCE_MODE_TIMEOUT;
 			if (!intf->maintenance_mode
 			    && !intf->maintenance_mode_enable) {
-				intf->maintenance_mode_enable = 1;
+				intf->maintenance_mode_enable = true;
 				maintenance_mode_update(intf);
 			}
 			spin_unlock_irqrestore(&intf->maintenance_mode_lock,
@@ -2876,6 +2917,8 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
 		     (unsigned long) intf);
 	atomic_set(&intf->watchdog_pretimeouts_to_deliver, 0);
 	spin_lock_init(&intf->events_lock);
+	atomic_set(&intf->event_waiters, 0);
+	intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
 	INIT_LIST_HEAD(&intf->waiting_events);
 	intf->waiting_events_count = 0;
 	mutex_init(&intf->cmd_rcvrs_mutex);
@@ -3965,7 +4008,8 @@ smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg,
 
 static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 			      struct list_head *timeouts, long timeout_period,
-			      int slot, unsigned long *flags)
+			      int slot, unsigned long *flags,
+			      unsigned int *waiting_msgs)
 {
 	struct ipmi_recv_msg     *msg;
 	struct ipmi_smi_handlers *handlers;
@@ -3977,8 +4021,10 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		return;
 
 	ent->timeout -= timeout_period;
-	if (ent->timeout > 0)
+	if (ent->timeout > 0) {
+		(*waiting_msgs)++;
 		return;
+	}
 
 	if (ent->retries_left == 0) {
 		/* The message has used all its retries. */
@@ -3995,6 +4041,8 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		struct ipmi_smi_msg *smi_msg;
 		/* More retries, send again. */
 
+		(*waiting_msgs)++;
+
 		/*
 		 * Start with the max timer, set to normal timer after
 		 * the message is sent.
@@ -4040,117 +4088,118 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 	}
 }
 
-static void ipmi_timeout_handler(long timeout_period)
+static unsigned int ipmi_timeout_handler(ipmi_smi_t intf, long timeout_period)
 {
-	ipmi_smi_t           intf;
 	struct list_head     timeouts;
 	struct ipmi_recv_msg *msg, *msg2;
 	unsigned long        flags;
 	int                  i;
+	unsigned int         waiting_msgs = 0;
 
-	rcu_read_lock();
-	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
-		tasklet_schedule(&intf->recv_tasklet);
-
-		/*
-		 * Go through the seq table and find any messages that
-		 * have timed out, putting them in the timeouts
-		 * list.
-		 */
-		INIT_LIST_HEAD(&timeouts);
-		spin_lock_irqsave(&intf->seq_lock, flags);
-		for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
-			check_msg_timeout(intf, &(intf->seq_table[i]),
-					  &timeouts, timeout_period, i,
-					  &flags);
-		spin_unlock_irqrestore(&intf->seq_lock, flags);
+	/*
+	 * Go through the seq table and find any messages that
+	 * have timed out, putting them in the timeouts
+	 * list.
+	 */
+	INIT_LIST_HEAD(&timeouts);
+	spin_lock_irqsave(&intf->seq_lock, flags);
+	for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
+		check_msg_timeout(intf, &(intf->seq_table[i]),
+				  &timeouts, timeout_period, i,
+				  &flags, &waiting_msgs);
+	spin_unlock_irqrestore(&intf->seq_lock, flags);
 
-		list_for_each_entry_safe(msg, msg2, &timeouts, link)
-			deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE);
+	list_for_each_entry_safe(msg, msg2, &timeouts, link)
+		deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE);
 
-		/*
-		 * Maintenance mode handling.  Check the timeout
-		 * optimistically before we claim the lock.  It may
-		 * mean a timeout gets missed occasionally, but that
-		 * only means the timeout gets extended by one period
-		 * in that case.  No big deal, and it avoids the lock
-		 * most of the time.
-		 */
+	/*
+	 * Maintenance mode handling.  Check the timeout
+	 * optimistically before we claim the lock.  It may
+	 * mean a timeout gets missed occasionally, but that
+	 * only means the timeout gets extended by one period
+	 * in that case.  No big deal, and it avoids the lock
+	 * most of the time.
+	 */
+	if (intf->auto_maintenance_timeout > 0) {
+		spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
 		if (intf->auto_maintenance_timeout > 0) {
-			spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
-			if (intf->auto_maintenance_timeout > 0) {
-				intf->auto_maintenance_timeout
-					-= timeout_period;
-				if (!intf->maintenance_mode
-				    && (intf->auto_maintenance_timeout <= 0)) {
-					intf->maintenance_mode_enable = 0;
-					maintenance_mode_update(intf);
-				}
+			intf->auto_maintenance_timeout
+				-= timeout_period;
+			if (!intf->maintenance_mode
+			    && (intf->auto_maintenance_timeout <= 0)) {
+				intf->maintenance_mode_enable = false;
+				maintenance_mode_update(intf);
 			}
-			spin_unlock_irqrestore(&intf->maintenance_mode_lock,
-					       flags);
 		}
+		spin_unlock_irqrestore(&intf->maintenance_mode_lock,
+				       flags);
 	}
-	rcu_read_unlock();
+
+	tasklet_schedule(&intf->recv_tasklet);
+
+	return waiting_msgs;
 }
 
-static void ipmi_request_event(void)
+static void ipmi_request_event(ipmi_smi_t intf)
 {
-	ipmi_smi_t               intf;
 	struct ipmi_smi_handlers *handlers;
 
-	rcu_read_lock();
-	/*
-	 * Called from the timer, no need to check if handlers is
-	 * valid.
-	 */
-	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
-		/* No event requests when in maintenance mode. */
-		if (intf->maintenance_mode_enable)
-			continue;
+	/* No event requests when in maintenance mode. */
+	if (intf->maintenance_mode_enable)
+		return;
 
-		handlers = intf->handlers;
-		if (handlers)
-			handlers->request_events(intf->send_info);
-	}
-	rcu_read_unlock();
+	handlers = intf->handlers;
+	if (handlers)
+		handlers->request_events(intf->send_info);
 }
 
 static struct timer_list ipmi_timer;
 
-/* Call every ~1000 ms. */
-#define IPMI_TIMEOUT_TIME	1000
-
-/* How many jiffies does it take to get to the timeout time. */
-#define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000)
-
-/*
- * Request events from the queue every second (this is the number of
- * IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the
- * future, IPMI will add a way to know immediately if an event is in
- * the queue and this silliness can go away.
- */
-#define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME))
-
 static atomic_t stop_operation;
-static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
 
 static void ipmi_timeout(unsigned long data)
 {
+	ipmi_smi_t intf;
+	int nt = 0;
+
 	if (atomic_read(&stop_operation))
 		return;
 
-	ticks_to_req_ev--;
-	if (ticks_to_req_ev == 0) {
-		ipmi_request_event();
-		ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
-	}
+	rcu_read_lock();
+	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
+		int lnt = 0;
+
+		if (atomic_read(&intf->event_waiters)) {
+			intf->ticks_to_req_ev--;
+			if (intf->ticks_to_req_ev == 0) {
+				ipmi_request_event(intf);
+				intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
+			}
+			lnt++;
+		}
 
-	ipmi_timeout_handler(IPMI_TIMEOUT_TIME);
+		lnt += ipmi_timeout_handler(intf, IPMI_TIMEOUT_TIME);
 
-	mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
+		lnt = !!lnt;
+		if (lnt != intf->last_needs_timer &&
+					intf->handlers->set_need_watch)
+			intf->handlers->set_need_watch(intf->send_info, lnt);
+		intf->last_needs_timer = lnt;
+
+		nt += lnt;
+	}
+	rcu_read_unlock();
+
+	if (nt)
+		mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
 }
 
+static void need_waiter(ipmi_smi_t intf)
+{
+	/* Racy, but worst case we start the timer twice. */
+	if (!timer_pending(&ipmi_timer))
+		mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
+}
 
 static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0);
 static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 0f20d3646a465..5d665680ae33f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -217,7 +217,7 @@ struct smi_info {
 	unsigned char       msg_flags;
 
 	/* Does the BMC have an event buffer? */
-	char		    has_event_buffer;
+	bool		    has_event_buffer;
 
 	/*
 	 * If set to true, this will request events the next time the
@@ -230,7 +230,7 @@ struct smi_info {
 	 * call.  Generally used after a panic to make sure stuff goes
 	 * out.
 	 */
-	int                 run_to_completion;
+	bool                run_to_completion;
 
 	/* The I/O port of an SI interface. */
 	int                 port;
@@ -248,19 +248,25 @@ struct smi_info {
 	/* The timer for this si. */
 	struct timer_list   si_timer;
 
+	/* This flag is set, if the timer is running (timer_pending() isn't enough) */
+	bool		    timer_running;
+
 	/* The time (in jiffies) the last timeout occurred at. */
 	unsigned long       last_timeout_jiffies;
 
 	/* Used to gracefully stop the timer without race conditions. */
 	atomic_t            stop_operation;
 
+	/* Are we waiting for the events, pretimeouts, received msgs? */
+	atomic_t            need_watch;
+
 	/*
 	 * The driver will disable interrupts when it gets into a
 	 * situation where it cannot handle messages due to lack of
 	 * memory.  Once that situation clears up, it will re-enable
 	 * interrupts.
 	 */
-	int interrupt_disabled;
+	bool interrupt_disabled;
 
 	/* From the get device id response... */
 	struct ipmi_device_id device_id;
@@ -273,7 +279,7 @@ struct smi_info {
 	 * True if we allocated the device, false if it came from
 	 * someplace else (like PCI).
 	 */
-	int dev_registered;
+	bool dev_registered;
 
 	/* Slave address, could be reported from DMI. */
 	unsigned char slave_addr;
@@ -297,19 +303,19 @@ struct smi_info {
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
 #ifdef CONFIG_PCI
-static int pci_registered;
+static bool pci_registered;
 #endif
 #ifdef CONFIG_ACPI
-static int pnp_registered;
+static bool pnp_registered;
 #endif
 #ifdef CONFIG_PARISC
-static int parisc_registered;
+static bool parisc_registered;
 #endif
 
 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 static int num_max_busy_us;
 
-static int unload_when_empty = 1;
+static bool unload_when_empty = true;
 
 static int add_smi(struct smi_info *smi);
 static int try_smi_init(struct smi_info *smi);
@@ -434,6 +440,13 @@ static void start_clear_flags(struct smi_info *smi_info)
 	smi_info->si_state = SI_CLEARING_FLAGS;
 }
 
+static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
+{
+	smi_info->last_timeout_jiffies = jiffies;
+	mod_timer(&smi_info->si_timer, new_val);
+	smi_info->timer_running = true;
+}
+
 /*
  * When we have a situtaion where we run out of memory and cannot
  * allocate messages, we just leave them in the BMC and run the system
@@ -444,10 +457,9 @@ static inline void disable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 		start_disable_irq(smi_info);
-		smi_info->interrupt_disabled = 1;
+		smi_info->interrupt_disabled = true;
 		if (!atomic_read(&smi_info->stop_operation))
-			mod_timer(&smi_info->si_timer,
-				  jiffies + SI_TIMEOUT_JIFFIES);
+			smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
 	}
 }
 
@@ -455,7 +467,7 @@ static inline void enable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
 		start_enable_irq(smi_info);
-		smi_info->interrupt_disabled = 0;
+		smi_info->interrupt_disabled = false;
 	}
 }
 
@@ -700,7 +712,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 			dev_warn(smi_info->dev,
 				 "Maybe ok, but ipmi might run very slowly.\n");
 		} else
-			smi_info->interrupt_disabled = 0;
+			smi_info->interrupt_disabled = false;
 		smi_info->si_state = SI_NORMAL;
 		break;
 	}
@@ -853,6 +865,19 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 	return si_sm_result;
 }
 
+static void check_start_timer_thread(struct smi_info *smi_info)
+{
+	if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
+		smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
+		if (smi_info->thread)
+			wake_up_process(smi_info->thread);
+
+		start_next_msg(smi_info);
+		smi_event_handler(smi_info, 0);
+	}
+}
+
 static void sender(void                *send_info,
 		   struct ipmi_smi_msg *msg,
 		   int                 priority)
@@ -906,27 +931,11 @@ static void sender(void                *send_info,
 	else
 		list_add_tail(&msg->link, &smi_info->xmit_msgs);
 
-	if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
-		/*
-		 * last_timeout_jiffies is updated here to avoid
-		 * smi_timeout() handler passing very large time_diff
-		 * value to smi_event_handler() that causes
-		 * the send command to abort.
-		 */
-		smi_info->last_timeout_jiffies = jiffies;
-
-		mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
-
-		if (smi_info->thread)
-			wake_up_process(smi_info->thread);
-
-		start_next_msg(smi_info);
-		smi_event_handler(smi_info, 0);
-	}
+	check_start_timer_thread(smi_info);
 	spin_unlock_irqrestore(&smi_info->si_lock, flags);
 }
 
-static void set_run_to_completion(void *send_info, int i_run_to_completion)
+static void set_run_to_completion(void *send_info, bool i_run_to_completion)
 {
 	struct smi_info   *smi_info = send_info;
 	enum si_sm_result result;
@@ -1004,6 +1013,17 @@ static int ipmi_thread(void *data)
 
 		spin_lock_irqsave(&(smi_info->si_lock), flags);
 		smi_result = smi_event_handler(smi_info, 0);
+
+		/*
+		 * If the driver is doing something, there is a possible
+		 * race with the timer.  If the timer handler see idle,
+		 * and the thread here sees something else, the timer
+		 * handler won't restart the timer even though it is
+		 * required.  So start it here if necessary.
+		 */
+		if (smi_result != SI_SM_IDLE && !smi_info->timer_running)
+			smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
@@ -1011,9 +1031,15 @@ static int ipmi_thread(void *data)
 			; /* do nothing */
 		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
 			schedule();
-		else if (smi_result == SI_SM_IDLE)
-			schedule_timeout_interruptible(100);
-		else
+		else if (smi_result == SI_SM_IDLE) {
+			if (atomic_read(&smi_info->need_watch)) {
+				schedule_timeout_interruptible(100);
+			} else {
+				/* Wait to be woken up when we are needed. */
+				__set_current_state(TASK_INTERRUPTIBLE);
+				schedule();
+			}
+		} else
 			schedule_timeout_interruptible(1);
 	}
 	return 0;
@@ -1024,7 +1050,7 @@ static void poll(void *send_info)
 {
 	struct smi_info *smi_info = send_info;
 	unsigned long flags = 0;
-	int run_to_completion = smi_info->run_to_completion;
+	bool run_to_completion = smi_info->run_to_completion;
 
 	/*
 	 * Make sure there is some delay in the poll loop so we can
@@ -1049,6 +1075,17 @@ static void request_events(void *send_info)
 	atomic_set(&smi_info->req_events, 1);
 }
 
+static void set_need_watch(void *send_info, bool enable)
+{
+	struct smi_info *smi_info = send_info;
+	unsigned long flags;
+
+	atomic_set(&smi_info->need_watch, enable);
+	spin_lock_irqsave(&smi_info->si_lock, flags);
+	check_start_timer_thread(smi_info);
+	spin_unlock_irqrestore(&smi_info->si_lock, flags);
+}
+
 static int initialized;
 
 static void smi_timeout(unsigned long data)
@@ -1073,10 +1110,6 @@ static void smi_timeout(unsigned long data)
 		     * SI_USEC_PER_JIFFY);
 	smi_result = smi_event_handler(smi_info, time_diff);
 
-	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
-
-	smi_info->last_timeout_jiffies = jiffies_now;
-
 	if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 		/* Running with interrupts, only do long timeouts. */
 		timeout = jiffies + SI_TIMEOUT_JIFFIES;
@@ -1098,7 +1131,10 @@ static void smi_timeout(unsigned long data)
 
  do_mod_timer:
 	if (smi_result != SI_SM_IDLE)
-		mod_timer(&(smi_info->si_timer), timeout);
+		smi_mod_timer(smi_info, timeout);
+	else
+		smi_info->timer_running = false;
+	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 }
 
 static irqreturn_t si_irq_handler(int irq, void *data)
@@ -1146,8 +1182,7 @@ static int smi_start_processing(void       *send_info,
 
 	/* Set up the timer that drives the interface. */
 	setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
-	new_smi->last_timeout_jiffies = jiffies;
-	mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+	smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES);
 
 	/*
 	 * Check if the user forcefully enabled the daemon.
@@ -1188,7 +1223,7 @@ static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
 	return 0;
 }
 
-static void set_maintenance_mode(void *send_info, int enable)
+static void set_maintenance_mode(void *send_info, bool enable)
 {
 	struct smi_info   *smi_info = send_info;
 
@@ -1202,6 +1237,7 @@ static struct ipmi_smi_handlers handlers = {
 	.get_smi_info		= get_smi_info,
 	.sender			= sender,
 	.request_events		= request_events,
+	.set_need_watch		= set_need_watch,
 	.set_maintenance_mode   = set_maintenance_mode,
 	.set_run_to_completion  = set_run_to_completion,
 	.poll			= poll,
@@ -1229,7 +1265,7 @@ static bool          si_tryplatform = 1;
 #ifdef CONFIG_PCI
 static bool          si_trypci = 1;
 #endif
-static bool          si_trydefaults = 1;
+static bool          si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS);
 static char          *si_type[SI_MAX_PARMS];
 #define MAX_SI_TYPE_STR 30
 static char          si_type_str[MAX_SI_TYPE_STR];
@@ -1328,7 +1364,7 @@ module_param_array(force_kipmid, int, &num_force_kipmid, 0);
 MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
 		 " disabled(0).  Normally the IPMI driver auto-detects"
 		 " this, but the value may be overridden by this parm.");
-module_param(unload_when_empty, int, 0);
+module_param(unload_when_empty, bool, 0);
 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
 		 " specified or found, default is 1.  Setting to 0"
 		 " is useful for hot add of devices using hotmod.");
@@ -3336,18 +3372,19 @@ static int try_smi_init(struct smi_info *new_smi)
 	INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
 	new_smi->curr_msg = NULL;
 	atomic_set(&new_smi->req_events, 0);
-	new_smi->run_to_completion = 0;
+	new_smi->run_to_completion = false;
 	for (i = 0; i < SI_NUM_STATS; i++)
 		atomic_set(&new_smi->stats[i], 0);
 
-	new_smi->interrupt_disabled = 1;
+	new_smi->interrupt_disabled = true;
 	atomic_set(&new_smi->stop_operation, 0);
+	atomic_set(&new_smi->need_watch, 0);
 	new_smi->intf_num = smi_num;
 	smi_num++;
 
 	rv = try_enable_event_buffer(new_smi);
 	if (rv == 0)
-		new_smi->has_event_buffer = 1;
+		new_smi->has_event_buffer = true;
 
 	/*
 	 * Start clearing the flags before we enable interrupts or the
@@ -3381,7 +3418,7 @@ static int try_smi_init(struct smi_info *new_smi)
 			       rv);
 			goto out_err;
 		}
-		new_smi->dev_registered = 1;
+		new_smi->dev_registered = true;
 	}
 
 	rv = ipmi_register_smi(&handlers,
@@ -3430,7 +3467,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	wait_for_timer_and_thread(new_smi);
 
  out_err:
-	new_smi->interrupt_disabled = 1;
+	new_smi->interrupt_disabled = true;
 
 	if (new_smi->intf) {
 		ipmi_unregister_smi(new_smi->intf);
@@ -3466,7 +3503,7 @@ static int try_smi_init(struct smi_info *new_smi)
 
 	if (new_smi->dev_registered) {
 		platform_device_unregister(new_smi->pdev);
-		new_smi->dev_registered = 0;
+		new_smi->dev_registered = false;
 	}
 
 	return rv;
@@ -3521,14 +3558,14 @@ static int init_ipmi_si(void)
 			printk(KERN_ERR PFX "Unable to register "
 			       "PCI driver: %d\n", rv);
 		else
-			pci_registered = 1;
+			pci_registered = true;
 	}
 #endif
 
 #ifdef CONFIG_ACPI
 	if (si_tryacpi) {
 		pnp_register_driver(&ipmi_pnp_driver);
-		pnp_registered = 1;
+		pnp_registered = true;
 	}
 #endif
 
@@ -3544,7 +3581,7 @@ static int init_ipmi_si(void)
 
 #ifdef CONFIG_PARISC
 	register_parisc_driver(&ipmi_parisc_driver);
-	parisc_registered = 1;
+	parisc_registered = true;
 	/* poking PC IO addresses will crash machine, don't do it */
 	si_trydefaults = 0;
 #endif
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index b27f5342fe761..8d3dfb0c8a262 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -15,7 +15,7 @@ config SYNCLINK_CS
 
 	  This driver may be built as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called synclinkmp.  If you want to do that, say M
+	  The module will be called synclink_cs.  If you want to do that, say M
 	  here.
 
 config CARDMAN_4000
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 429b75bb60e81..6b75713d953a4 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -295,17 +295,17 @@
  * The minimum number of bits of entropy before we wake up a read on
  * /dev/random.  Should be enough to do a significant reseed.
  */
-static int random_read_wakeup_thresh = 64;
+static int random_read_wakeup_bits = 64;
 
 /*
  * If the entropy count falls under this number of bits, then we
  * should wake up processes which are selecting or polling on write
  * access to /dev/random.
  */
-static int random_write_wakeup_thresh = 28 * OUTPUT_POOL_WORDS;
+static int random_write_wakeup_bits = 28 * OUTPUT_POOL_WORDS;
 
 /*
- * The minimum number of seconds between urandom pool resending.  We
+ * The minimum number of seconds between urandom pool reseeding.  We
  * do this to limit the amount of entropy that can be drained from the
  * input pool even if there are heavy demands on /dev/urandom.
  */
@@ -322,7 +322,7 @@ static int random_min_urandom_seed = 60;
  * Register.  (See M. Matsumoto & Y. Kurita, 1992.  Twisted GFSR
  * generators.  ACM Transactions on Modeling and Computer Simulation
  * 2(3):179-194.  Also see M. Matsumoto & Y. Kurita, 1994.  Twisted
- * GFSR generators II.  ACM Transactions on Mdeling and Computer
+ * GFSR generators II.  ACM Transactions on Modeling and Computer
  * Simulation 4:254-266)
  *
  * Thanks to Colin Plumb for suggesting this.
@@ -666,10 +666,10 @@ retry:
 				  r->entropy_total, _RET_IP_);
 
 	if (r == &input_pool) {
-		int entropy_bytes = entropy_count >> ENTROPY_SHIFT;
+		int entropy_bits = entropy_count >> ENTROPY_SHIFT;
 
 		/* should we wake readers? */
-		if (entropy_bytes >= random_read_wakeup_thresh) {
+		if (entropy_bits >= random_read_wakeup_bits) {
 			wake_up_interruptible(&random_read_wait);
 			kill_fasync(&fasync, SIGIO, POLL_IN);
 		}
@@ -678,9 +678,9 @@ retry:
 		 * forth between them, until the output pools are 75%
 		 * full.
 		 */
-		if (entropy_bytes > random_write_wakeup_thresh &&
+		if (entropy_bits > random_write_wakeup_bits &&
 		    r->initialized &&
-		    r->entropy_total >= 2*random_read_wakeup_thresh) {
+		    r->entropy_total >= 2*random_read_wakeup_bits) {
 			static struct entropy_store *last = &blocking_pool;
 			struct entropy_store *other = &blocking_pool;
 
@@ -844,6 +844,8 @@ void add_interrupt_randomness(int irq, int irq_flags)
 	cycles_t		cycles = random_get_entropy();
 	__u32			input[4], c_high, j_high;
 	__u64			ip;
+	unsigned long		seed;
+	int			credit;
 
 	c_high = (sizeof(cycles) > 4) ? cycles >> 32 : 0;
 	j_high = (sizeof(now) > 4) ? now >> 32 : 0;
@@ -862,20 +864,33 @@ void add_interrupt_randomness(int irq, int irq_flags)
 
 	r = nonblocking_pool.initialized ? &input_pool : &nonblocking_pool;
 	__mix_pool_bytes(r, &fast_pool->pool, sizeof(fast_pool->pool), NULL);
+
 	/*
 	 * If we don't have a valid cycle counter, and we see
 	 * back-to-back timer interrupts, then skip giving credit for
-	 * any entropy.
+	 * any entropy, otherwise credit 1 bit.
 	 */
+	credit = 1;
 	if (cycles == 0) {
 		if (irq_flags & __IRQF_TIMER) {
 			if (fast_pool->last_timer_intr)
-				return;
+				credit = 0;
 			fast_pool->last_timer_intr = 1;
 		} else
 			fast_pool->last_timer_intr = 0;
 	}
-	credit_entropy_bits(r, 1);
+
+	/*
+	 * If we have architectural seed generator, produce a seed and
+	 * add it to the pool.  For the sake of paranoia count it as
+	 * 50% entropic.
+	 */
+	if (arch_get_random_seed_long(&seed)) {
+		__mix_pool_bytes(r, &seed, sizeof(seed), NULL);
+		credit += sizeof(seed) * 4;
+	}
+
+	credit_entropy_bits(r, credit);
 }
 
 #ifdef CONFIG_BLOCK
@@ -924,19 +939,19 @@ static void _xfer_secondary_pool(struct entropy_store *r, size_t nbytes)
 {
 	__u32	tmp[OUTPUT_POOL_WORDS];
 
-	/* For /dev/random's pool, always leave two wakeup worth's BITS */
-	int rsvd = r->limit ? 0 : random_read_wakeup_thresh/4;
+	/* For /dev/random's pool, always leave two wakeups' worth */
+	int rsvd_bytes = r->limit ? 0 : random_read_wakeup_bits / 4;
 	int bytes = nbytes;
 
-	/* pull at least as many as BYTES as wakeup BITS */
-	bytes = max_t(int, bytes, random_read_wakeup_thresh / 8);
+	/* pull at least as much as a wakeup */
+	bytes = max_t(int, bytes, random_read_wakeup_bits / 8);
 	/* but never more than the buffer size */
 	bytes = min_t(int, bytes, sizeof(tmp));
 
 	trace_xfer_secondary_pool(r->name, bytes * 8, nbytes * 8,
 				  ENTROPY_BITS(r), ENTROPY_BITS(r->pull));
 	bytes = extract_entropy(r->pull, tmp, bytes,
-				random_read_wakeup_thresh / 8, rsvd);
+				random_read_wakeup_bits / 8, rsvd_bytes);
 	mix_pool_bytes(r, tmp, bytes, NULL);
 	credit_entropy_bits(r, bytes*8);
 }
@@ -952,35 +967,22 @@ static void push_to_pool(struct work_struct *work)
 	struct entropy_store *r = container_of(work, struct entropy_store,
 					      push_work);
 	BUG_ON(!r);
-	_xfer_secondary_pool(r, random_read_wakeup_thresh/8);
+	_xfer_secondary_pool(r, random_read_wakeup_bits/8);
 	trace_push_to_pool(r->name, r->entropy_count >> ENTROPY_SHIFT,
 			   r->pull->entropy_count >> ENTROPY_SHIFT);
 }
 
 /*
- * These functions extracts randomness from the "entropy pool", and
- * returns it in a buffer.
- *
- * The min parameter specifies the minimum amount we can pull before
- * failing to avoid races that defeat catastrophic reseeding while the
- * reserved parameter indicates how much entropy we must leave in the
- * pool after each pull to avoid starving other readers.
- *
- * Note: extract_entropy() assumes that .poolwords is a multiple of 16 words.
+ * This function decides how many bytes to actually take from the
+ * given pool, and also debits the entropy count accordingly.
  */
-
 static size_t account(struct entropy_store *r, size_t nbytes, int min,
 		      int reserved)
 {
-	unsigned long flags;
-	int wakeup_write = 0;
 	int have_bytes;
 	int entropy_count, orig;
 	size_t ibytes;
 
-	/* Hold lock while accounting */
-	spin_lock_irqsave(&r->lock, flags);
-
 	BUG_ON(r->entropy_count > r->poolinfo->poolfracbits);
 
 	/* Can we pull enough? */
@@ -988,29 +990,19 @@ retry:
 	entropy_count = orig = ACCESS_ONCE(r->entropy_count);
 	have_bytes = entropy_count >> (ENTROPY_SHIFT + 3);
 	ibytes = nbytes;
-	if (have_bytes < min + reserved) {
+	/* If limited, never pull more than available */
+	if (r->limit)
+		ibytes = min_t(size_t, ibytes, have_bytes - reserved);
+	if (ibytes < min)
 		ibytes = 0;
-	} else {
-		/* If limited, never pull more than available */
-		if (r->limit && ibytes + reserved >= have_bytes)
-			ibytes = have_bytes - reserved;
-
-		if (have_bytes >= ibytes + reserved)
-			entropy_count -= ibytes << (ENTROPY_SHIFT + 3);
-		else
-			entropy_count = reserved << (ENTROPY_SHIFT + 3);
-
-		if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
-			goto retry;
-
-		if ((r->entropy_count >> ENTROPY_SHIFT)
-		    < random_write_wakeup_thresh)
-			wakeup_write = 1;
-	}
-	spin_unlock_irqrestore(&r->lock, flags);
+	entropy_count = max_t(int, 0,
+			      entropy_count - (ibytes << (ENTROPY_SHIFT + 3)));
+	if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
+		goto retry;
 
 	trace_debit_entropy(r->name, 8 * ibytes);
-	if (wakeup_write) {
+	if (ibytes &&
+	    (r->entropy_count >> ENTROPY_SHIFT) < random_write_wakeup_bits) {
 		wake_up_interruptible(&random_write_wait);
 		kill_fasync(&fasync, SIGIO, POLL_OUT);
 	}
@@ -1018,6 +1010,12 @@ retry:
 	return ibytes;
 }
 
+/*
+ * This function does the actual extraction for extract_entropy and
+ * extract_entropy_user.
+ *
+ * Note: we assume that .poolwords is a multiple of 16 words.
+ */
 static void extract_buf(struct entropy_store *r, __u8 *out)
 {
 	int i;
@@ -1029,23 +1027,23 @@ static void extract_buf(struct entropy_store *r, __u8 *out)
 	__u8 extract[64];
 	unsigned long flags;
 
-	/* Generate a hash across the pool, 16 words (512 bits) at a time */
-	sha_init(hash.w);
-	spin_lock_irqsave(&r->lock, flags);
-	for (i = 0; i < r->poolinfo->poolwords; i += 16)
-		sha_transform(hash.w, (__u8 *)(r->pool + i), workspace);
-
 	/*
-	 * If we have a architectural hardware random number
-	 * generator, mix that in, too.
+	 * If we have an architectural hardware random number
+	 * generator, use it for SHA's initial vector
 	 */
+	sha_init(hash.w);
 	for (i = 0; i < LONGS(20); i++) {
 		unsigned long v;
 		if (!arch_get_random_long(&v))
 			break;
-		hash.l[i] ^= v;
+		hash.l[i] = v;
 	}
 
+	/* Generate a hash across the pool, 16 words (512 bits) at a time */
+	spin_lock_irqsave(&r->lock, flags);
+	for (i = 0; i < r->poolinfo->poolwords; i += 16)
+		sha_transform(hash.w, (__u8 *)(r->pool + i), workspace);
+
 	/*
 	 * We mix the hash back into the pool to prevent backtracking
 	 * attacks (where the attacker knows the state of the pool
@@ -1079,6 +1077,15 @@ static void extract_buf(struct entropy_store *r, __u8 *out)
 	memset(&hash, 0, sizeof(hash));
 }
 
+/*
+ * This function extracts randomness from the "entropy pool", and
+ * returns it in a buffer.
+ *
+ * The min parameter specifies the minimum amount we can pull before
+ * failing to avoid races that defeat catastrophic reseeding while the
+ * reserved parameter indicates how much entropy we must leave in the
+ * pool after each pull to avoid starving other readers.
+ */
 static ssize_t extract_entropy(struct entropy_store *r, void *buf,
 				 size_t nbytes, int min, int reserved)
 {
@@ -1129,6 +1136,10 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf,
 	return ret;
 }
 
+/*
+ * This function extracts randomness from the "entropy pool", and
+ * returns it in a userspace buffer.
+ */
 static ssize_t extract_entropy_user(struct entropy_store *r, void __user *buf,
 				    size_t nbytes)
 {
@@ -1170,8 +1181,9 @@ static ssize_t extract_entropy_user(struct entropy_store *r, void __user *buf,
 /*
  * This function is the exported kernel interface.  It returns some
  * number of good random numbers, suitable for key generation, seeding
- * TCP sequence numbers, etc.  It does not use the hw random number
- * generator, if available; use get_random_bytes_arch() for that.
+ * TCP sequence numbers, etc.  It does not rely on the hardware random
+ * number generator.  For random bytes direct from the hardware RNG
+ * (when available), use get_random_bytes_arch().
  */
 void get_random_bytes(void *buf, int nbytes)
 {
@@ -1238,7 +1250,8 @@ static void init_std_data(struct entropy_store *r)
 	r->last_pulled = jiffies;
 	mix_pool_bytes(r, &now, sizeof(now), NULL);
 	for (i = r->poolinfo->poolbytes; i > 0; i -= sizeof(rv)) {
-		if (!arch_get_random_long(&rv))
+		if (!arch_get_random_seed_long(&rv) &&
+		    !arch_get_random_long(&rv))
 			rv = random_get_entropy();
 		mix_pool_bytes(r, &rv, sizeof(rv), NULL);
 	}
@@ -1281,56 +1294,71 @@ void rand_initialize_disk(struct gendisk *disk)
 }
 #endif
 
-static ssize_t
-random_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
+/*
+ * Attempt an emergency refill using arch_get_random_seed_long().
+ *
+ * As with add_interrupt_randomness() be paranoid and only
+ * credit the output as 50% entropic.
+ */
+static int arch_random_refill(void)
 {
-	ssize_t n, retval = 0, count = 0;
+	const unsigned int nlongs = 64;	/* Arbitrary number */
+	unsigned int n = 0;
+	unsigned int i;
+	unsigned long buf[nlongs];
 
-	if (nbytes == 0)
+	if (!arch_has_random_seed())
 		return 0;
 
-	while (nbytes > 0) {
-		n = nbytes;
-		if (n > SEC_XFER_SIZE)
-			n = SEC_XFER_SIZE;
+	for (i = 0; i < nlongs; i++) {
+		if (arch_get_random_seed_long(&buf[n]))
+			n++;
+	}
 
-		n = extract_entropy_user(&blocking_pool, buf, n);
+	if (n) {
+		unsigned int rand_bytes = n * sizeof(unsigned long);
 
-		if (n < 0) {
-			retval = n;
-			break;
-		}
+		mix_pool_bytes(&input_pool, buf, rand_bytes, NULL);
+		credit_entropy_bits(&input_pool, rand_bytes*4);
+	}
 
+	return n;
+}
+
+static ssize_t
+random_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
+{
+	ssize_t n;
+
+	if (nbytes == 0)
+		return 0;
+
+	nbytes = min_t(size_t, nbytes, SEC_XFER_SIZE);
+	while (1) {
+		n = extract_entropy_user(&blocking_pool, buf, nbytes);
+		if (n < 0)
+			return n;
 		trace_random_read(n*8, (nbytes-n)*8,
 				  ENTROPY_BITS(&blocking_pool),
 				  ENTROPY_BITS(&input_pool));
+		if (n > 0)
+			return n;
 
-		if (n == 0) {
-			if (file->f_flags & O_NONBLOCK) {
-				retval = -EAGAIN;
-				break;
-			}
-
-			wait_event_interruptible(random_read_wait,
-				ENTROPY_BITS(&input_pool) >=
-				random_read_wakeup_thresh);
-
-			if (signal_pending(current)) {
-				retval = -ERESTARTSYS;
-				break;
-			}
+		/* Pool is (near) empty.  Maybe wait and retry. */
 
+		/* First try an emergency refill */
+		if (arch_random_refill())
 			continue;
-		}
 
-		count += n;
-		buf += n;
-		nbytes -= n;
-		break;		/* This break makes the device work */
-				/* like a named pipe */
-	}
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
 
-	return (count ? count : retval);
+		wait_event_interruptible(random_read_wait,
+			ENTROPY_BITS(&input_pool) >=
+			random_read_wakeup_bits);
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+	}
 }
 
 static ssize_t
@@ -1358,9 +1386,9 @@ random_poll(struct file *file, poll_table * wait)
 	poll_wait(file, &random_read_wait, wait);
 	poll_wait(file, &random_write_wait, wait);
 	mask = 0;
-	if (ENTROPY_BITS(&input_pool) >= random_read_wakeup_thresh)
+	if (ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits)
 		mask |= POLLIN | POLLRDNORM;
-	if (ENTROPY_BITS(&input_pool) < random_write_wakeup_thresh)
+	if (ENTROPY_BITS(&input_pool) < random_write_wakeup_bits)
 		mask |= POLLOUT | POLLWRNORM;
 	return mask;
 }
@@ -1507,18 +1535,18 @@ EXPORT_SYMBOL(generate_random_uuid);
 #include <linux/sysctl.h>
 
 static int min_read_thresh = 8, min_write_thresh;
-static int max_read_thresh = INPUT_POOL_WORDS * 32;
+static int max_read_thresh = OUTPUT_POOL_WORDS * 32;
 static int max_write_thresh = INPUT_POOL_WORDS * 32;
 static char sysctl_bootid[16];
 
 /*
- * These functions is used to return both the bootid UUID, and random
+ * This function is used to return both the bootid UUID, and random
  * UUID.  The difference is in whether table->data is NULL; if it is,
  * then a new UUID is generated and returned to the user.
  *
- * If the user accesses this via the proc interface, it will be returned
- * as an ASCII string in the standard UUID format.  If accesses via the
- * sysctl system call, it is returned as 16 bytes of binary data.
+ * If the user accesses this via the proc interface, the UUID will be
+ * returned as an ASCII string in the standard UUID format; if via the
+ * sysctl system call, as 16 bytes of binary data.
  */
 static int proc_do_uuid(struct ctl_table *table, int write,
 			void __user *buffer, size_t *lenp, loff_t *ppos)
@@ -1583,7 +1611,7 @@ struct ctl_table random_table[] = {
 	},
 	{
 		.procname	= "read_wakeup_threshold",
-		.data		= &random_read_wakeup_thresh,
+		.data		= &random_read_wakeup_bits,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
@@ -1592,7 +1620,7 @@ struct ctl_table random_table[] = {
 	},
 	{
 		.procname	= "write_wakeup_threshold",
-		.data		= &random_write_wakeup_thresh,
+		.data		= &random_write_wakeup_bits,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 1a65838888cdb..c54cac3f8bc8d 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -74,7 +74,7 @@ config TCG_NSC
 
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
-	depends on PPC64 || HAS_IOPORT
+	depends on PPC64 || HAS_IOPORT_MAP
 	---help---
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index daea84c417432..a15ce4ef39cd9 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -17,7 +17,7 @@
 #include <linux/device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
-#include <linux/export.h>
+#include <linux/module.h>
 
 struct ttyprintk_port {
 	struct tty_port port;
@@ -210,10 +210,19 @@ static int __init ttyprintk_init(void)
 	return 0;
 
 error:
-	tty_unregister_driver(ttyprintk_driver);
 	put_tty_driver(ttyprintk_driver);
 	tty_port_destroy(&tpk_port.port);
-	ttyprintk_driver = NULL;
 	return ret;
 }
+
+static void __exit ttyprintk_exit(void)
+{
+	tty_unregister_driver(ttyprintk_driver);
+	put_tty_driver(ttyprintk_driver);
+	tty_port_destroy(&tpk_port.port);
+}
+
 device_initcall(ttyprintk_init);
+module_exit(ttyprintk_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 6928d094451d6..60aafb8a1f2e2 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -901,9 +901,9 @@ static int pipe_to_sg(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 		if (len + offset > PAGE_SIZE)
 			len = PAGE_SIZE - offset;
 
-		src = buf->ops->map(pipe, buf, 1);
+		src = kmap_atomic(buf->page);
 		memcpy(page_address(page) + offset, src + buf->offset, len);
-		buf->ops->unmap(pipe, buf, src);
+		kunmap_atomic(src);
 
 		sg_set_page(&(sgl->sg[sgl->n]), page, len, offset);
 	}