i2c: imx: make bus recovery through pinctrl optional

Since commit 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") the
driver starts to use gpio/pinctrl to support optional bus recovery
feature.  But pinctrl is not always usable.  There are platforms such
as ls1021a and ls1043a that don't support pinctrl, and it could just
be broken due to old/broken device tree.  The patch makes it really
optional that the probe function won't bailout on pinctrl problems
instead it just disables bus recovery and prints out notification when
there is problem with pinctrl.  Since pinctrl is only used by bus
recovery in this driver, move pinctrl initialization into bus recovery
init function to prevent confusion.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

1 files changed, 22 insertions, 9 deletions

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index cb11eee956731..592a8f26a708d 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -984,11 +984,24 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
 	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
 }
 
-static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
+/*
+ * We switch SCL and SDA to their GPIO function and do some bitbanging
+ * for bus recovery. These alternative pinmux settings can be
+ * described in the device tree by a separate pinctrl state "gpio". If
+ * this is missing this is not a big problem, the only implication is
+ * that we can't do bus recovery.
+ */
+static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 		struct platform_device *pdev)
 {
 	struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
 
+	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+		dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+		return PTR_ERR(i2c_imx->pinctrl);
+	}
+
 	i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
 			PINCTRL_STATE_DEFAULT);
 	i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
@@ -1001,7 +1014,7 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 	    IS_ERR(i2c_imx->pinctrl_pins_default) ||
 	    IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
 		dev_dbg(&pdev->dev, "recovery information incomplete\n");
-		return;
+		return 0;
 	}
 
 	dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
@@ -1011,6 +1024,8 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 	rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
 	rinfo->recover_bus = i2c_generic_gpio_recovery;
 	i2c_imx->adapter.bus_recovery_info = rinfo;
+
+	return 0;
 }
 
 static u32 i2c_imx_func(struct i2c_adapter *adapter)
@@ -1081,12 +1096,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (IS_ERR(i2c_imx->pinctrl)) {
-		ret = PTR_ERR(i2c_imx->pinctrl);
-		goto clk_disable;
-	}
-
 	/* Request IRQ */
 	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
 				pdev->name, i2c_imx);
@@ -1125,7 +1134,11 @@ static int i2c_imx_probe(struct platform_device *pdev)
 			i2c_imx, IMX_I2C_I2CR);
 	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
 
-	i2c_imx_init_recovery_info(i2c_imx, pdev);
+	/* Init optional bus recovery function */
+	ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
+	/* Give it another chance if pinctrl used is not ready yet */
+	if (ret == -EPROBE_DEFER)
+		goto rpm_disable;
 
 	/* Add I2C adapter */
 	ret = i2c_add_numbered_adapter(&i2c_imx->adapter);