block: make scsi_request and scsi ioctl support optional

We only need this code to support scsi, ide, cciss and virtio.  And at
least for virtio it's a deprecated feature to start with.

This should shrink the kernel size for embedded device that only use,
say eMMC a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

5 files changed, 8 insertions, 0 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 223ff2fcae7e0..7a4c787a5edfb 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -69,6 +69,7 @@ config AMIGA_Z2RAM
 config GDROM
 	tristate "SEGA Dreamcast GD-ROM drive"
 	depends on SH_DREAMCAST
+	select BLK_SCSI_REQUEST # only for the generic cdrom code
 	help
 	  A standard SEGA Dreamcast comes with a modified CD ROM drive called a
 	  "GD-ROM" by SEGA to signify it is capable of reading special disks
@@ -114,6 +115,7 @@ config BLK_CPQ_CISS_DA
 	tristate "Compaq Smart Array 5xxx support"
 	depends on PCI
 	select CHECK_SIGNATURE
+	select BLK_SCSI_REQUEST
 	help
 	  This is the driver for Compaq Smart Array 5xxx controllers.
 	  Everyone using these boards should say Y here.
@@ -386,6 +388,7 @@ config BLK_DEV_RAM_DAX
 config CDROM_PKTCDVD
 	tristate "Packet writing on CD/DVD media (DEPRECATED)"
 	depends on !UML
+	select BLK_SCSI_REQUEST
 	help
 	  Note: This driver is deprecated and will be removed from the
 	  kernel in the near future!
@@ -497,6 +500,7 @@ config XEN_BLKDEV_BACKEND
 config VIRTIO_BLK
 	tristate "Virtio block driver"
 	depends on VIRTIO
+	select BLK_SCSI_REQUEST
 	---help---
 	  This is the virtual block driver for virtio.  It can be used with
           lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
index efefb5ac30045..3a15247942e41 100644
--- a/drivers/block/paride/Kconfig
+++ b/drivers/block/paride/Kconfig
@@ -25,6 +25,7 @@ config PARIDE_PD
 config PARIDE_PCD
 	tristate "Parallel port ATAPI CD-ROMs"
 	depends on PARIDE
+	select BLK_SCSI_REQUEST # only for the generic cdrom code
 	---help---
 	  This option enables the high-level driver for ATAPI CD-ROM devices
 	  connected through a parallel port. If you chose to build PARIDE
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 39ea67f9b0669..c99a25c075bcb 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -10,6 +10,7 @@ menuconfig IDE
 	tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
 	depends on HAVE_IDE
 	depends on BLOCK
+	select BLK_SCSI_REQUEST
 	---help---
 	  If you say Y here, your kernel will be able to manage ATA/(E)IDE and
 	  ATAPI units. The most common cases are IDE hard drives and ATAPI
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index a4f6b0d955159..d4023bf1e739d 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -18,6 +18,7 @@ config SCSI
 	depends on BLOCK
 	select SCSI_DMA if HAS_DMA
 	select SG_POOL
+	select BLK_SCSI_REQUEST
 	---help---
 	  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
 	  any other SCSI device under Linux, say Y and make sure that you know
diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig
index 257361280510b..e2bc99980f755 100644
--- a/drivers/target/Kconfig
+++ b/drivers/target/Kconfig
@@ -4,6 +4,7 @@ menuconfig TARGET_CORE
 	depends on SCSI && BLOCK
 	select CONFIGFS_FS
 	select CRC_T10DIF
+	select BLK_SCSI_REQUEST # only for scsi_command_size_tbl..
 	default n
 	help
 	Say Y or M here to enable the TCM Storage Engine and ConfigFS enabled