diff options
146 files changed, 6477 insertions, 4495 deletions
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt new file mode 100644 index 0000000000000..fd459f00aa5a0 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt @@ -0,0 +1,26 @@ + +* Samsung Exynos NoC (Network on Chip) Probe device + +The Samsung Exynos542x SoC has NoC (Network on Chip) Probe for NoC bus. +NoC provides the primitive values to get the performance data. The packets +that the Network on Chip (NoC) probes detects are transported over +the network infrastructure to observer units. You can configure probes to +capture packets with header or data on the data request response network, +or as traffic debug or statistic collectors. Exynos542x bus has multiple +NoC probes to provide bandwidth information about behavior of the SoC +that you can use while analyzing system performance. + +Required properties: +- compatible: Should be "samsung,exynos5420-nocp" +- reg: physical base address of each NoC Probe and length of memory mapped region. + +Optional properties: +- clock-names : the name of clock used by the NoC Probe, "nocp" +- clocks : phandles for clock specified in "clock-names" property + +Example : NoC Probe nodes in Device Tree are listed below. + + nocp_mem0_0: nocp@10CA1000 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1000 0x200>; + }; diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt new file mode 100644 index 0000000000000..d3ec8e676b6bf --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -0,0 +1,409 @@ +* Generic Exynos Bus frequency device + +The Samsung Exynos SoC has many buses for data transfer between DRAM +and sub-blocks in SoC. Most Exynos SoCs share the common architecture +for buses. Generally, each bus of Exynos SoC includes a source clock +and a power line, which are able to change the clock frequency +of the bus in runtime. To monitor the usage of each bus in runtime, +the driver uses the PPMU (Platform Performance Monitoring Unit), which +is able to measure the current load of sub-blocks. + +The Exynos SoC includes the various sub-blocks which have the each AXI bus. +The each AXI bus has the owned source clock but, has not the only owned +power line. The power line might be shared among one more sub-blocks. +So, we can divide into two type of device as the role of each sub-block. +There are two type of bus devices as following: +- parent bus device +- passive bus device + +Basically, parent and passive bus device share the same power line. +The parent bus device can only change the voltage of shared power line +and the rest bus devices (passive bus device) depend on the decision of +the parent bus device. If there are three blocks which share the VDD_xxx +power line, Only one block should be parent device and then the rest blocks +should depend on the parent device as passive device. + + VDD_xxx |--- A block (parent) + |--- B block (passive) + |--- C block (passive) + +There are a little different composition among Exynos SoC because each Exynos +SoC has different sub-blocks. Therefore, such difference should be specified +in devicetree file instead of each device driver. In result, this driver +is able to support the bus frequency for all Exynos SoCs. + +Required properties for all bus devices: +- compatible: Should be "samsung,exynos-bus". +- clock-names : the name of clock used by the bus, "bus". +- clocks : phandles for clock specified in "clock-names" property. +- operating-points-v2: the OPP table including frequency/voltage information + to support DVFS (Dynamic Voltage/Frequency Scaling) feature. + +Required properties only for parent bus device: +- vdd-supply: the regulator to provide the buses with the voltage. +- devfreq-events: the devfreq-event device to monitor the current utilization + of buses. + +Required properties only for passive bus device: +- devfreq: the parent bus device. + +Optional properties only for parent bus device: +- exynos,saturation-ratio: the percentage value which is used to calibrate + the performance count against total cycle count. +- exynos,voltage-tolerance: the percentage value for bus voltage tolerance + which is used to calculate the max voltage. + +Detailed correlation between sub-blocks and power line according to Exynos SoC: +- In case of Exynos3250, there are two power line as following: + VDD_MIF |--- DMC + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC + |--- G3D + |--- RIGHTBUS + |--- PERIR + |--- FSYS + |--- LCD0 + |--- PERIR + |--- ISP + |--- CAM + +- In case of Exynos4210, there is one power line as following: + VDD_INT |--- DMC (parent device) + |--- LEFTBUS + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- LCD0 + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- LCD1 + +- In case of Exynos4x12, there are two power line as following: + VDD_MIF |--- DMC + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- IMAGE + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- ISP + +- In case of Exynos5422, there are two power line as following: + VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) + |--- DREX 1 + + VDD_INT |--- NoC_Core (parent device) + |--- G2D + |--- G3D + |--- DISP1 + |--- NoC_WCORE + |--- GSCL + |--- MSCL + |--- ISP + |--- MFC + |--- GEN + |--- PERIS + |--- PERIC + |--- FSYS + |--- FSYS2 + +Example1: + Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to + power line (regulator). The MIF (Memory Interface) AXI bus is used to + transfer data between DRAM and CPU and uses the VDD_MIF regulator. + + - MIF (Memory Interface) block + : VDD_MIF |--- DMC (Dynamic Memory Controller) + + - INT (Internal) block + : VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC + |--- G3D + |--- RIGHTBUS + |--- FSYS + |--- LCD0 + |--- PERIR + |--- ISP + |--- CAM + + - MIF bus's frequency/voltage table + ----------------------- + |Lv| Freq | Voltage | + ----------------------- + |L1| 50000 |800000 | + |L2| 100000 |800000 | + |L3| 134000 |800000 | + |L4| 200000 |825000 | + |L5| 400000 |875000 | + ----------------------- + + - INT bus's frequency/voltage table + ---------------------------------------------------------- + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | + | name| |LCD0 | | | || | + | | |FSYS | | | || | + | | |MFC | | | || | + ---------------------------------------------------------- + |Mode |*parent|passive |passive|passive|passive|| | + ---------------------------------------------------------- + |Lv |Frequency ||Voltage | + ---------------------------------------------------------- + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | + |L4 |134000 |134000 |200000 |200000 | ||1000000 | + |L5 |200000 |200000 |400000 |300000 | ||1000000 | + ---------------------------------------------------------- + +Example2 : + The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi + is listed below: + + bus_dmc: bus_dmc { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_dmc CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_dmc_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + opp-microvolt = <800000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <800000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <800000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <825000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <875000>; + }; + }; + + bus_leftbus: bus_leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_rightbus: bus_rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_lcd0: bus_lcd0 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_160>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_200>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_mcuisp: bus_mcuisp { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>; + clock-names = "bus"; + operating-points-v2 = <&bus_mcuisp_opp_table>; + status = "disabled"; + }; + + bus_isp: bus_isp { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_266>; + clock-names = "bus"; + operating-points-v2 = <&bus_isp_opp_table>; + status = "disabled"; + }; + + bus_peril: bus_peril { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peril_opp_table>; + status = "disabled"; + }; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_leftbus_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + opp-microvolt = <900000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + opp-microvolt = <900000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <1000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1000000>; + }; + }; + + bus_mcuisp_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + }; + + bus_isp_opp_table: opp_table3 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_peril_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + + + Usage case to handle the frequency and voltage of bus on runtime + in exynos3250-rinato.dts is listed below: + + &bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; /* VDD_MIF */ + status = "okay"; + }; + + &bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; + }; + + &bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_lcd0 { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_mcuisp { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_isp { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_peril { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index c84fb47265ebc..d23dc002a87e9 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -37,8 +37,10 @@ Required properties: - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - "rockchip,rk3399-io-voltage-domain" for rk3399 - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains -- rockchip,grf: phandle to the syscon managing the "general register files" +Deprecated properties: +- rockchip,grf: phandle to the syscon managing the "general register files" + Systems should move the io-domains to a sub-node of the grf simple-mfd. You specify supplies using the standard regulator bindings by including a phandle the relevant regulator. All specified supplies must be able diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 09126c2307d2b..1b322c0c8dff8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1671,6 +1671,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. hwp_only Only load intel_pstate on systems which support hardware P state control (HWP) if available. + support_acpi_ppc + Enforce ACPI _PPC performance limits. If the Fixed ACPI + Description Table, specifies preferred power management + profile as "Enterprise Server" or "Performance Server", + then this feature is turned on by default. intremap= [X86-64, Intel-IOMMU] on enable Interrupt Remapping (default) diff --git a/MAINTAINERS b/MAINTAINERS index d2b9b80ffe30c..f40d40d420307 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1322,6 +1322,7 @@ F: drivers/rtc/rtc-armada38x.c F: arch/arm/boot/dts/armada* F: arch/arm/boot/dts/kirkwood* F: arch/arm64/boot/dts/marvell/armada* +F: drivers/cpufreq/mvebu-cpufreq.c ARM/Marvell Berlin SoC support @@ -3539,6 +3540,15 @@ F: drivers/devfreq/devfreq-event.c F: include/linux/devfreq-event.h F: Documentation/devicetree/bindings/devfreq/event/ +BUS FREQUENCY DRIVER FOR SAMSUNG EXYNOS +M: Chanwoo Choi <cw00.choi@samsung.com> +L: linux-pm@vger.kernel.org +L: linux-samsung-soc@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git +S: Maintained +F: drivers/devfreq/exynos-bus.c +F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt + DEVICE NUMBER REGISTRY M: Torben Mathiasen <device@lanana.org> W: http://lanana.org/docs/device-list/index.html diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h index 3848259bebf85..baefe1d515174 100644 --- a/arch/arm/include/asm/cpuidle.h +++ b/arch/arm/include/asm/cpuidle.h @@ -36,7 +36,7 @@ struct cpuidle_ops { struct of_cpuidle_method { const char *method; - struct cpuidle_ops *ops; + const struct cpuidle_ops *ops; }; #define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops) \ diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 703926e7007b4..a44b268e12e1a 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -70,7 +70,7 @@ int arm_cpuidle_suspend(int index) * * Returns a struct cpuidle_ops pointer, NULL if not found. */ -static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) +static const struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) { struct of_cpuidle_method *m = __cpuidle_method_of_table; @@ -88,7 +88,7 @@ static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) * * Get the method name defined in the 'enable-method' property, retrieve the * associated cpuidle_ops and do a struct copy. This copy is needed because all - * cpuidle_ops are tagged __initdata and will be unloaded after the init + * cpuidle_ops are tagged __initconst and will be unloaded after the init * process. * * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if @@ -97,7 +97,7 @@ static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) { const char *enable_method; - struct cpuidle_ops *ops; + const struct cpuidle_ops *ops; enable_method = of_get_property(dn, "enable-method", NULL); if (!enable_method) diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c index 25d73870cccad..ac181c6797ee5 100644 --- a/arch/arm/mach-berlin/berlin.c +++ b/arch/arm/mach-berlin/berlin.c @@ -18,11 +18,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> -static void __init berlin_init_late(void) -{ - platform_device_register_simple("cpufreq-dt", -1, NULL, 0); -} - static const char * const berlin_dt_compat[] = { "marvell,berlin", NULL, @@ -30,7 +25,6 @@ static const char * const berlin_dt_compat[] = { DT_MACHINE_START(BERLIN_DT, "Marvell Berlin") .dt_compat = berlin_dt_compat, - .init_late = berlin_init_late, /* * with DT probing for L2CCs, berlin_init_machine can be removed. * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index bbf51a46f772d..4d3b056fd786e 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -213,33 +213,6 @@ static void __init exynos_init_irq(void) exynos_map_pmu(); } -static const struct of_device_id exynos_cpufreq_matches[] = { - { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" }, - { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" }, - { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" }, - { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" }, - { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, -#ifndef CONFIG_BL_SWITCHER - { .compatible = "samsung,exynos5420", .data = "cpufreq-dt" }, - { .compatible = "samsung,exynos5800", .data = "cpufreq-dt" }, -#endif - { /* sentinel */ } -}; - -static void __init exynos_cpufreq_init(void) -{ - struct device_node *root = of_find_node_by_path("/"); - const struct of_device_id *match; - - match = of_match_node(exynos_cpufreq_matches, root); - if (!match) { - platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); - return; - } - - platform_device_register_simple(match->data, -1, NULL, 0); -} - static void __init exynos_dt_machine_init(void) { /* @@ -262,8 +235,6 @@ static void __init exynos_dt_machine_init(void) of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); - exynos_cpufreq_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index bd42d1bd10aff..530a728c2acc2 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -18,15 +18,6 @@ #include "common.h" #include "mx27.h" -static void __init imx27_dt_init(void) -{ - struct platform_device_info devinfo = { .name = "cpufreq-dt", }; - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - platform_device_register_full(&devinfo); -} - static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL @@ -36,6 +27,5 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .init_machine = imx27_dt_init, .dt_compat = imx27_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index 6883fbaf9484b..10a82a4f1e588 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -50,13 +50,10 @@ static void __init imx51_ipu_mipi_setup(void) static void __init imx51_dt_init(void) { - struct platform_device_info devinfo = { .name = "cpufreq-dt", }; - imx51_ipu_mipi_setup(); imx_src_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - platform_device_register_full(&devinfo); } static void __init imx51_init_late(void) diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 86316a979297f..18b5c5c136db9 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -40,8 +40,6 @@ static void __init imx53_dt_init(void) static void __init imx53_init_late(void) { imx53_pm_init(); - - platform_device_register_simple("cpufreq-dt", -1, NULL, 0); } static const char * const imx53_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index 5a27f20c9a82b..b450f525a6709 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -105,11 +105,6 @@ static void __init imx7d_init_irq(void) irqchip_init(); } -static void __init imx7d_init_late(void) -{ - platform_device_register_simple("cpufreq-dt", -1, NULL, 0); -} - static const char *const imx7d_dt_compat[] __initconst = { "fsl,imx7d", NULL, @@ -117,7 +112,6 @@ static const char *const imx7d_dt_compat[] __initconst = { DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") .init_irq = imx7d_init_irq, - .init_late = imx7d_init_late, .init_machine = imx7d_init_machine, .dt_compat = imx7d_dt_compat, MACHINE_END diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index ed8fda4cd0558..b44442338e4e4 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -20,7 +20,6 @@ #include <linux/clk.h> #include <linux/cpu_pm.h> -#include <linux/cpufreq-dt.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> @@ -29,7 +28,6 @@ #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/platform_device.h> -#include <linux/pm_opp.h> #include <linux/resource.h> #include <linux/slab.h> #include <linux/smp.h> @@ -608,86 +606,3 @@ int mvebu_pmsu_dfs_request(int cpu) return 0; } - -struct cpufreq_dt_platform_data cpufreq_dt_pd = { - .independent_clocks = true, -}; - -static int __init armada_xp_pmsu_cpufreq_init(void) -{ - struct device_node *np; - struct resource res; - int ret, cpu; - - if (!of_machine_is_compatible("marvell,armadaxp")) - return 0; - - /* - * In order to have proper cpufreq handling, we need to ensure - * that the Device Tree description of the CPU clock includes - * the definition of the PMU DFS registers. If not, we do not - * register the clock notifier and the cpufreq driver. This - * piece of code is only for compatibility with old Device - * Trees. - */ - np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock"); - if (!np) - return 0; - - ret = of_address_to_resource(np, 1, &res); - if (ret) { - pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n"); - of_node_put(np); - return 0; - } - - of_node_put(np); - - /* - * For each CPU, this loop registers the operating points - * supported (which are the nominal CPU frequency and half of - * it), and registers the clock notifier that will take care - * of doing the PMSU part of a frequency transition. - */ - for_each_possible_cpu(cpu) { - struct device *cpu_dev; - struct clk *clk; - int ret; - - cpu_dev = get_cpu_device(cpu); - if (!cpu_dev) { - pr_err("Cannot get CPU %d\n", cpu); - continue; - } - - clk = clk_get(cpu_dev, 0); - if (IS_ERR(clk)) { - pr_err("Cannot get clock for CPU %d\n", cpu); - return PTR_ERR(clk); - } - - /* - * In case of a failure of dev_pm_opp_add(), we don't - * bother with cleaning up the registered OPP (there's - * no function to do so), and simply cancel the - * registration of the cpufreq device. - */ - ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0); - if (ret) { - clk_put(clk); - return ret; - } - - ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0); - if (ret) { - clk_put(clk); - return ret; - } - } - - platform_device_register_data(NULL, "cpufreq-dt", -1, - &cpufreq_dt_pd, sizeof(cpufreq_dt_pd)); - return 0; -} - -device_initcall(armada_xp_pmsu_cpufreq_init); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 58920bc8807bc..2f7b11da7d5d9 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -277,13 +277,10 @@ static void __init omap4_init_voltages(void) static inline void omap_init_cpufreq(void) { - struct platform_device_info devinfo = { }; + struct platform_device_info devinfo = { .name = "omap-cpufreq" }; if (!of_have_populated_dt()) - devinfo.name = "omap-cpufreq"; - else - devinfo.name = "cpufreq-dt"; - platform_device_register_full(&devinfo); + platform_device_register_full(&devinfo); } static int __init omap2_common_pm_init(void) diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 3f07cc5dfe5fc..beb71da5d9c8f 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -74,7 +74,6 @@ static void __init rockchip_dt_init(void) { rockchip_suspend_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - platform_device_register_simple("cpufreq-dt", 0, NULL, 0); } static const char * const rockchip_board_dt_compat[] = { diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index a65c80ac9009d..c9ea0e6ff4f90 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -38,7 +38,6 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # PM objects obj-$(CONFIG_SUSPEND) += suspend.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 5464b7a75e302..3b562d87826d7 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -25,16 +25,9 @@ static inline int shmobile_suspend_init(void) { return 0; } static inline void shmobile_smp_apmu_suspend_init(void) { } #endif -#ifdef CONFIG_CPU_FREQ -int shmobile_cpufreq_init(void); -#else -static inline int shmobile_cpufreq_init(void) { return 0; } -#endif - static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); - shmobile_cpufreq_init(); } #endif /* __ARCH_MACH_COMMON_H */ diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c deleted file mode 100644 index 634d701c56a74..0000000000000 --- a/arch/arm/mach-shmobile/cpufreq.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * CPUFreq support code for SH-Mobile ARM - * - * Copyright (C) 2014 Gaku Inami - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/platform_device.h> - -#include "common.h" - -int __init shmobile_cpufreq_init(void) -{ - platform_device_register_simple("cpufreq-dt", -1, NULL, 0); - return 0; -} diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 3c156190a1d44..95dca8c2c9edc 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -17,11 +17,6 @@ #include <asm/mach/arch.h> -static void __init sunxi_dt_cpufreq_init(void) -{ - platform_device_register_simple("cpufreq-dt", -1, NULL, 0); -} - static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", "allwinner,sun5i-a10s", @@ -32,7 +27,6 @@ static const char * const sunxi_board_dt_compat[] = { DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families") .dt_compat = sunxi_board_dt_compat, - .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -53,7 +47,6 @@ static void __init sun6i_timer_init(void) DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") .init_time = sun6i_timer_init, .dt_compat = sun6i_board_dt_compat, - .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun7i_board_dt_compat[] = { @@ -63,7 +56,6 @@ static const char * const sun7i_board_dt_compat[] = { DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") .dt_compat = sun7i_board_dt_compat, - .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun8i_board_dt_compat[] = { @@ -77,7 +69,6 @@ static const char * const sun8i_board_dt_compat[] = { DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family") .init_time = sun6i_timer_init, .dt_compat = sun8i_board_dt_compat, - .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun9i_board_dt_compat[] = { diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 860ffb663f02b..da876d28ccbc5 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -110,7 +110,6 @@ static void __init zynq_init_late(void) */ static void __init zynq_init_machine(void) { - struct platform_device_info devinfo = { .name = "cpufreq-dt", }; struct soc_device_attribute *soc_dev_attr; struct soc_device *soc_dev; struct device *parent = NULL; @@ -145,7 +144,6 @@ out: of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); platform_device_register(&zynq_cpuidle_device); - platform_device_register_full(&devinfo); } static void __init zynq_timer_init(void) diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index 0e64a1b5e62a0..3657ac1cb8015 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -159,7 +159,7 @@ int of_pm_clk_add_clks(struct device *dev) count = of_count_phandle_with_args(dev->of_node, "clocks", "#clock-cells"); - if (count == 0) + if (count <= 0) return -ENODEV; clks = kcalloc(count, sizeof(*clks), GFP_KERNEL); diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 56705b52758ef..de23b648fce3b 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -229,17 +229,6 @@ static int genpd_poweron(struct generic_pm_domain *genpd, unsigned int depth) return ret; } -static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev) -{ - return GENPD_DEV_CALLBACK(genpd, int, save_state, dev); -} - -static int genpd_restore_dev(struct generic_pm_domain *genpd, - struct device *dev) -{ - return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev); -} - static int genpd_dev_pm_qos_notifier(struct notifier_block *nb, unsigned long val, void *ptr) { @@ -372,17 +361,63 @@ static void genpd_power_off_work_fn(struct work_struct *work) } /** - * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain. + * __genpd_runtime_suspend - walk the hierarchy of ->runtime_suspend() callbacks + * @dev: Device to handle. + */ +static int __genpd_runtime_suspend(struct device *dev) +{ + int (*cb)(struct device *__dev); + + if (dev->type && dev->type->pm) + cb = dev->type->pm->runtime_suspend; + else if (dev->class && dev->class->pm) + cb = dev->class->pm->runtime_suspend; + else if (dev->bus && dev->bus->pm) + cb = dev->bus->pm->runtime_suspend; + else + cb = NULL; + + if (!cb && dev->driver && dev->driver->pm) + cb = dev->driver->pm->runtime_suspend; + + return cb ? cb(dev) : 0; +} + +/** + * __genpd_runtime_resume - walk the hierarchy of ->runtime_resume() callbacks + * @dev: Device to handle. + */ +static int __genpd_runtime_resume(struct device *dev) +{ + int (*cb)(struct device *__dev); + + if (dev->type && dev->type->pm) + cb = dev->type->pm->runtime_resume; + else if (dev->class && dev->class->pm) + cb = dev->class->pm->runtime_resume; + else if (dev->bus && dev->bus->pm) + cb = dev->bus->pm->runtime_resume; + else + cb = NULL; + + if (!cb && dev->driver && dev->driver->pm) + cb = dev->driver->pm->runtime_resume; + + return cb ? cb(dev) : 0; +} + +/** + * genpd_runtime_suspend - Suspend a device belonging to I/O PM domain. * @dev: Device to suspend. * * Carry out a runtime suspend of a device under the assumption that its * pm_domain field points to the domain member of an object of type * struct generic_pm_domain representing a PM domain consisting of I/O devices. */ -static int pm_genpd_runtime_suspend(struct device *dev) +static int genpd_runtime_suspend(struct device *dev) { struct generic_pm_domain *genpd; - bool (*stop_ok)(struct device *__dev); + bool (*suspend_ok)(struct device *__dev); struct gpd_timing_data *td = &dev_gpd_data(dev)->td; bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; @@ -401,21 +436,21 @@ static int pm_genpd_runtime_suspend(struct device *dev) * runtime PM is disabled. Under these circumstances, we shall skip * validating/measuring the PM QoS latency. */ - stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL; - if (runtime_pm && stop_ok && !stop_ok(dev)) + suspend_ok = genpd->gov ? genpd->gov->suspend_ok : NULL; + if (runtime_pm && suspend_ok && !suspend_ok(dev)) return -EBUSY; /* Measure suspend latency. */ if (runtime_pm) time_start = ktime_get(); - ret = genpd_save_dev(genpd, dev); + ret = __genpd_runtime_suspend(dev); if (ret) return ret; ret = genpd_stop_dev(genpd, dev); if (ret) { - genpd_restore_dev(genpd, dev); + __genpd_runtime_resume(dev); return ret; } @@ -446,14 +481,14 @@ static int pm_genpd_runtime_suspend(struct device *dev) } /** - * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain. + * genpd_runtime_resume - Resume a device belonging to I/O PM domain. * @dev: Device to resume. * * Carry out a runtime resume of a device under the assumption that its * pm_domain field points to the domain member of an object of type * struct generic_pm_domain representing a PM domain consisting of I/O devices. */ -static int pm_genpd_runtime_resume(struct device *dev) +static int genpd_runtime_resume(struct device *dev) { struct generic_pm_domain *genpd; struct gpd_timing_data *td = &dev_gpd_data(dev)->td; @@ -491,7 +526,7 @@ static int pm_genpd_runtime_resume(struct device *dev) if (ret) goto err_poweroff; - ret = genpd_restore_dev(genpd, dev); + ret = __genpd_runtime_resume(dev); if (ret) goto err_stop; @@ -695,15 +730,6 @@ static int pm_genpd_prepare(struct device *dev) * at this point and a system wakeup event should be reported if it's * set up to wake up the system from sleep states. */ - pm_runtime_get_noresume(dev); - if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) - pm_wakeup_event(dev, 0); - - if (pm_wakeup_pending()) { - pm_runtime_put(dev); - return -EBUSY; - } - if (resume_needed(dev, genpd)) pm_runtime_resume(dev); @@ -716,10 +742,8 @@ static int pm_genpd_prepare(struct device *dev) mutex_unlock(&genpd->lock); - if (genpd->suspend_power_off) { - pm_runtime_put_noidle(dev); + if (genpd->suspend_power_off) return 0; - } /* * The PM domain must be in the GPD_STATE_ACTIVE state at this point, @@ -741,7 +765,6 @@ static int pm_genpd_prepare(struct device *dev) pm_runtime_enable(dev); } - pm_runtime_put(dev); return ret; } @@ -1427,54 +1450,6 @@ out: } EXPORT_SYMBOL_GPL(pm_genpd_remove_subdomain); -/* Default device callbacks for generic PM domains. */ - -/** - * pm_genpd_default_save_state - Default "save device state" for PM domains. - * @dev: Device to handle. - */ -static int pm_genpd_default_save_state(struct device *dev) -{ - int (*cb)(struct device *__dev); - - if (dev->type && dev->type->pm) - cb = dev->type->pm->runtime_suspend; - else if (dev->class && dev->class->pm) - cb = dev->class->pm->runtime_suspend; - else if (dev->bus && dev->bus->pm) - cb = dev->bus->pm->runtime_suspend; - else - cb = NULL; - - if (!cb && dev->driver && dev->driver->pm) - cb = dev->driver->pm->runtime_suspend; - - return cb ? cb(dev) : 0; -} - -/** - * pm_genpd_default_restore_state - Default PM domains "restore device state". - * @dev: Device to handle. - */ -static int pm_genpd_default_restore_state(struct device *dev) -{ - int (*cb)(struct device *__dev); - - if (dev->type && dev->type->pm) - cb = dev->type->pm->runtime_resume; - else if (dev->class && dev->class->pm) - cb = dev->class->pm->runtime_resume; - else if (dev->bus && dev->bus->pm) - cb = dev->bus->pm->runtime_resume; - else - cb = NULL; - - if (!cb && dev->driver && dev->driver->pm) - cb = dev->driver->pm->runtime_resume; - - return cb ? cb(dev) : 0; -} - /** * pm_genpd_init - Initialize a generic I/O PM domain object. * @genpd: PM domain object to initialize. @@ -1498,8 +1473,8 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->device_count = 0; genpd->max_off_time_ns = -1; genpd->max_off_time_changed = true; - genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; - genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; + genpd->domain.ops.runtime_suspend = genpd_runtime_suspend; + genpd->domain.ops.runtime_resume = genpd_runtime_resume; genpd->domain.ops.prepare = pm_genpd_prepare; genpd->domain.ops.suspend = pm_genpd_suspend; genpd->domain.ops.suspend_late = pm_genpd_suspend_late; @@ -1520,8 +1495,6 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->domain.ops.restore_early = pm_genpd_resume_early; genpd->domain.ops.restore = pm_genpd_resume; genpd->domain.ops.complete = pm_genpd_complete; - genpd->dev_ops.save_state = pm_genpd_default_save_state; - genpd->dev_ops.restore_state = pm_genpd_default_restore_state; if (genpd->flags & GENPD_FLAG_PM_CLK) { genpd->dev_ops.stop = pm_clk_suspend; diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c index 00a5436dd44b6..2e0fce711135c 100644 --- a/drivers/base/power/domain_governor.c +++ b/drivers/base/power/domain_governor.c @@ -37,10 +37,10 @@ static int dev_update_qos_constraint(struct device *dev, void *data) } /** - * default_stop_ok - Default PM domain governor routine for stopping devices. + * default_suspend_ok - Default PM domain governor routine to suspend devices. * @dev: Device to check. */ -static bool default_stop_ok(struct device *dev) +static bool default_suspend_ok(struct device *dev) { struct gpd_timing_data *td = &dev_gpd_data(dev)->td; unsigned long flags; @@ -51,13 +51,13 @@ static bool default_stop_ok(struct device *dev) spin_lock_irqsave(&dev->power.lock, flags); if (!td->constraint_changed) { - bool ret = td->cached_stop_ok; + bool ret = td->cached_suspend_ok; spin_unlock_irqrestore(&dev->power.lock, flags); return ret; } td->constraint_changed = false; - td->cached_stop_ok = false; + td->cached_suspend_ok = false; td->effective_constraint_ns = -1; constraint_ns = __dev_pm_qos_read_value(dev); @@ -83,13 +83,13 @@ static bool default_stop_ok(struct device *dev) return false; } td->effective_constraint_ns = constraint_ns; - td->cached_stop_ok = constraint_ns >= 0; + td->cached_suspend_ok = constraint_ns >= 0; /* * The children have been suspended already, so we don't need to take - * their stop latencies into account here. + * their suspend latencies into account here. */ - return td->cached_stop_ok; + return td->cached_suspend_ok; } /** @@ -150,7 +150,7 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd, */ td = &to_gpd_data(pdd)->td; constraint_ns = td->effective_constraint_ns; - /* default_stop_ok() need not be called before us. */ + /* default_suspend_ok() need not be called before us. */ if (constraint_ns < 0) { constraint_ns = dev_pm_qos_read_value(pdd->dev); constraint_ns *= NSEC_PER_USEC; @@ -227,7 +227,7 @@ static bool always_on_power_down_ok(struct dev_pm_domain *domain) } struct dev_power_governor simple_qos_governor = { - .stop_ok = default_stop_ok, + .suspend_ok = default_suspend_ok, .power_down_ok = default_power_down_ok, }; @@ -236,5 +236,5 @@ struct dev_power_governor simple_qos_governor = { */ struct dev_power_governor pm_domain_always_on_gov = { .power_down_ok = always_on_power_down_ok, - .stop_ok = default_stop_ok, + .suspend_ok = default_suspend_ok, }; diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 6e7c3ccea24bb..c81667d4bb602 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1556,7 +1556,6 @@ int dpm_suspend(pm_message_t state) static int device_prepare(struct device *dev, pm_message_t state) { int (*callback)(struct device *) = NULL; - char *info = NULL; int ret = 0; if (dev->power.syscore) @@ -1579,24 +1578,17 @@ static int device_prepare(struct device *dev, pm_message_t state) goto unlock; } - if (dev->pm_domain) { - info = "preparing power domain "; + if (dev->pm_domain) callback = dev->pm_domain->ops.prepare; - } else if (dev->type && dev->type->pm) { - info = "preparing type "; + else if (dev->type && dev->type->pm) callback = dev->type->pm->prepare; - } else if (dev->class && dev->class->pm) { - info = "preparing class "; + else if (dev->class && dev->class->pm) callback = dev->class->pm->prepare; - } else if (dev->bus && dev->bus->pm) { - info = "preparing bus "; + else if (dev->bus && dev->bus->pm) callback = dev->bus->pm->prepare; - } - if (!callback && dev->driver && dev->driver->pm) { - info = "preparing driver "; + if (!callback && dev->driver && dev->driver->pm) callback = dev->driver->pm->prepare; - } if (callback) ret = callback(dev); diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile index 19837ef04d8ef..e70ceb406fe91 100644 --- a/drivers/base/power/opp/Makefile +++ b/drivers/base/power/opp/Makefile @@ -1,3 +1,4 @@ ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG obj-y += core.o cpu.o +obj-$(CONFIG_OF) += of.o obj-$(CONFIG_DEBUG_FS) += debugfs.o diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index d8f4cc22856c9..7c04c87738a69 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -18,7 +18,6 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/device.h> -#include <linux/of.h> #include <linux/export.h> #include <linux/regulator/consumer.h> @@ -29,7 +28,7 @@ * from here, with each opp_table containing the list of opps it supports in * various states of availability. */ -static LIST_HEAD(opp_tables); +LIST_HEAD(opp_tables); /* Lock to allow exclusive modification to the device and opp lists */ DEFINE_MUTEX(opp_table_lock); @@ -53,26 +52,6 @@ static struct opp_device *_find_opp_dev(const struct device *dev, return NULL; } -static struct opp_table *_managed_opp(const struct device_node *np) -{ - struct opp_table *opp_table; - - list_for_each_entry_rcu(opp_table, &opp_tables, node) { - if (opp_table->np == np) { - /* - * Multiple devices can point to the same OPP table and - * so will have same node-pointer, np. - * - * But the OPPs will be considered as shared only if the - * OPP table contains a "opp-shared" property. - */ - return opp_table->shared_opp ? opp_table : NULL; - } - } - - return NULL; -} - /** * _find_opp_table() - find opp_table struct using device pointer * @dev: device pointer used to lookup OPP table @@ -757,7 +736,6 @@ static struct opp_table *_add_opp_table(struct device *dev) { struct opp_table *opp_table; struct opp_device *opp_dev; - struct device_node *np; int ret; /* Check for existing table for 'dev' first */ @@ -781,20 +759,7 @@ static struct opp_table *_add_opp_table(struct device *dev) return NULL; } - /* - * Only required for backward compatibility with v1 bindings, but isn't - * harmful for other cases. And so we do it unconditionally. - */ - np = of_node_get(dev->of_node); - if (np) { - u32 val; - - if (!of_property_read_u32(np, "clock-latency", &val)) - opp_table->clock_latency_ns_max = val; - of_property_read_u32(np, "voltage-tolerance", - &opp_table->voltage_tolerance_v1); - of_node_put(np); - } + _of_init_opp_table(opp_table, dev); /* Set regulator to a non-NULL error value */ opp_table->regulator = ERR_PTR(-ENXIO); @@ -890,8 +855,8 @@ static void _kfree_opp_rcu(struct rcu_head *head) * It is assumed that the caller holds required mutex for an RCU updater * strategy. */ -static void _opp_remove(struct opp_table *opp_table, - struct dev_pm_opp *opp, bool notify) +void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, + bool notify) { /* * Notify the changes in the availability of the operable @@ -952,8 +917,8 @@ unlock: } EXPORT_SYMBOL_GPL(dev_pm_opp_remove); -static struct dev_pm_opp *_allocate_opp(struct device *dev, - struct opp_table **opp_table) +struct dev_pm_opp *_allocate_opp(struct device *dev, + struct opp_table **opp_table) { struct dev_pm_opp *opp; @@ -989,8 +954,8 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, return true; } -static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, - struct opp_table *opp_table) +int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, + struct opp_table *opp_table) { struct dev_pm_opp *opp; struct list_head *head = &opp_table->opp_list; @@ -1066,8 +1031,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure */ -static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, - bool dynamic) +int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, + bool dynamic) { struct opp_table *opp_table; struct dev_pm_opp *new_opp; @@ -1112,83 +1077,6 @@ unlock: return ret; } -/* TODO: Support multiple regulators */ -static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, - struct opp_table *opp_table) -{ - u32 microvolt[3] = {0}; - u32 val; - int count, ret; - struct property *prop = NULL; - char name[NAME_MAX]; - - /* Search for "opp-microvolt-<name>" */ - if (opp_table->prop_name) { - snprintf(name, sizeof(name), "opp-microvolt-%s", - opp_table->prop_name); - prop = of_find_property(opp->np, name, NULL); - } - - if (!prop) { - /* Search for "opp-microvolt" */ - sprintf(name, "opp-microvolt"); - prop = of_find_property(opp->np, name, NULL); - - /* Missing property isn't a problem, but an invalid entry is */ - if (!prop) - return 0; - } - - count = of_property_count_u32_elems(opp->np, name); - if (count < 0) { - dev_err(dev, "%s: Invalid %s property (%d)\n", - __func__, name, count); - return count; - } - - /* There can be one or three elements here */ - if (count != 1 && count != 3) { - dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n", - __func__, name, count); - return -EINVAL; - } - - ret = of_property_read_u32_array(opp->np, name, microvolt, count); - if (ret) { - dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret); - return -EINVAL; - } - - opp->u_volt = microvolt[0]; - - if (count == 1) { - opp->u_volt_min = opp->u_volt; - opp->u_volt_max = opp->u_volt; - } else { - opp->u_volt_min = microvolt[1]; - opp->u_volt_max = microvolt[2]; - } - - /* Search for "opp-microamp-<name>" */ - prop = NULL; - if (opp_table->prop_name) { - snprintf(name, sizeof(name), "opp-microamp-%s", - opp_table->prop_name); - prop = of_find_property(opp->np, name, NULL); - } - - if (!prop) { - /* Search for "opp-microamp" */ - sprintf(name, "opp-microamp"); - prop = of_find_property(opp->np, name, NULL); - } - - if (prop && !of_property_read_u32(opp->np, name, &val)) - opp->u_amp = val; - - return 0; -} - /** * dev_pm_opp_set_supported_hw() - Set supported platforms * @dev: Device for which supported-hw has to be set. @@ -1517,144 +1405,6 @@ unlock: } EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator); -static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table, - struct device_node *np) -{ - unsigned int count = opp_table->supported_hw_count; - u32 version; - int ret; - - if (!opp_table->supported_hw) - return true; - - while (count--) { - ret = of_property_read_u32_index(np, "opp-supported-hw", count, - &version); - if (ret) { - dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n", - __func__, count, ret); - return false; - } - - /* Both of these are bitwise masks of the versions */ - if (!(version & opp_table->supported_hw[count])) - return false; - } - - return true; -} - -/** - * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings) - * @dev: device for which we do this operation - * @np: device node - * - * This function adds an opp definition to the opp table and returns status. The - * opp can be controlled using dev_pm_opp_enable/disable functions and may be - * removed by dev_pm_opp_remove. - * - * Locking: The internal opp_table and opp structures are RCU protected. - * Hence this function internally uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - * -EINVAL Failed parsing the OPP node - */ -static int _opp_add_static_v2(struct device *dev, struct device_node *np) -{ - struct opp_table *opp_table; - struct dev_pm_opp *new_opp; - u64 rate; - u32 val; - int ret; - - /* Hold our table modification lock here */ - mutex_lock(&opp_table_lock); - - new_opp = _allocate_opp(dev, &opp_table); - if (!new_opp) { - ret = -ENOMEM; - goto unlock; - } - - ret = of_property_read_u64(np, "opp-hz", &rate); - if (ret < 0) { - dev_err(dev, "%s: opp-hz not found\n", __func__); - goto free_opp; - } - - /* Check if the OPP supports hardware's hierarchy of versions or not */ - if (!_opp_is_supported(dev, opp_table, np)) { - dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate); - goto free_opp; - } - - /* - * Rate is defined as an unsigned long in clk API, and so casting - * explicitly to its type. Must be fixed once rate is 64 bit - * guaranteed in clk API. - */ - new_opp->rate = (unsigned long)rate; - new_opp->turbo = of_property_read_bool(np, "turbo-mode"); - - new_opp->np = np; - new_opp->dynamic = false; - new_opp->available = true; - - if (!of_property_read_u32(np, "clock-latency-ns", &val)) - new_opp->clock_latency_ns = val; - - ret = opp_parse_supplies(new_opp, dev, opp_table); - if (ret) - goto free_opp; - - ret = _opp_add(dev, new_opp, opp_table); - if (ret) - goto free_opp; - - /* OPP to select on device suspend */ - if (of_property_read_bool(np, "opp-suspend")) { - if (opp_table->suspend_opp) { - dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n", - __func__, opp_table->suspend_opp->rate, - new_opp->rate); - } else { - new_opp->suspend = true; - opp_table->suspend_opp = new_opp; - } - } - - if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max) - opp_table->clock_latency_ns_max = new_opp->clock_latency_ns; - - mutex_unlock(&opp_table_lock); - - pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", - __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, - new_opp->u_volt_min, new_opp->u_volt_max, - new_opp->clock_latency_ns); - - /* - * Notify the changes in the availability of the operable - * frequency/voltage list. - */ - srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp); - return 0; - -free_opp: - _opp_remove(opp_table, new_opp, false); -unlock: - mutex_unlock(&opp_table_lock); - return ret; -} - /** * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation @@ -1842,21 +1592,11 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev) } EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier); -#ifdef CONFIG_OF -/** - * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT - * entries - * @dev: device pointer used to lookup OPP table. - * - * Free OPPs created using static entries present in DT. - * - * Locking: The internal opp_table and opp structures are RCU protected. - * Hence this function indirectly uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. +/* + * Free OPPs either created using static entries present in DT or even the + * dynamically added entries based on remove_all param. */ -void dev_pm_opp_of_remove_table(struct device *dev) +void _dev_pm_opp_remove_table(struct device *dev, bool remove_all) { struct opp_table *opp_table; struct dev_pm_opp *opp, *tmp; @@ -1881,7 +1621,7 @@ void dev_pm_opp_of_remove_table(struct device *dev) if (list_is_singular(&opp_table->dev_list)) { /* Free static OPPs */ list_for_each_entry_safe(opp, tmp, &opp_table->opp_list, node) { - if (!opp->dynamic) + if (remove_all || !opp->dynamic) _opp_remove(opp_table, opp, true); } } else { @@ -1891,160 +1631,22 @@ void dev_pm_opp_of_remove_table(struct device *dev) unlock: mutex_unlock(&opp_table_lock); } -EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table); - -/* Returns opp descriptor node for a device, caller must do of_node_put() */ -struct device_node *_of_get_opp_desc_node(struct device *dev) -{ - /* - * TODO: Support for multiple OPP tables. - * - * There should be only ONE phandle present in "operating-points-v2" - * property. - */ - - return of_parse_phandle(dev->of_node, "operating-points-v2", 0); -} - -/* Initializes OPP tables based on new bindings */ -static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np) -{ - struct device_node *np; - struct opp_table *opp_table; - int ret = 0, count = 0; - - mutex_lock(&opp_table_lock); - - opp_table = _managed_opp(opp_np); - if (opp_table) { - /* OPPs are already managed */ - if (!_add_opp_dev(dev, opp_table)) - ret = -ENOMEM; - mutex_unlock(&opp_table_lock); - return ret; - } - mutex_unlock(&opp_table_lock); - - /* We have opp-table node now, iterate over it and add OPPs */ - for_each_available_child_of_node(opp_np, np) { - count++; - - ret = _opp_add_static_v2(dev, np); - if (ret) { - dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, - ret); - goto free_table; - } - } - - /* There should be one of more OPP defined */ - if (WARN_ON(!count)) - return -ENOENT; - - mutex_lock(&opp_table_lock); - - opp_table = _find_opp_table(dev); - if (WARN_ON(IS_ERR(opp_table))) { - ret = PTR_ERR(opp_table); - mutex_unlock(&opp_table_lock); - goto free_table; - } - - opp_table->np = opp_np; - opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared"); - - mutex_unlock(&opp_table_lock); - - return 0; - -free_table: - dev_pm_opp_of_remove_table(dev); - - return ret; -} - -/* Initializes OPP tables based on old-deprecated bindings */ -static int _of_add_opp_table_v1(struct device *dev) -{ - const struct property *prop; - const __be32 *val; - int nr; - - prop = of_find_property(dev->of_node, "operating-points", NULL); - if (!prop) - return -ENODEV; - if (!prop->value) - return -ENODATA; - - /* - * Each OPP is a set of tuples consisting of frequency and - * voltage like <freq-kHz vol-uV>. - */ - nr = prop->length / sizeof(u32); - if (nr % 2) { - dev_err(dev, "%s: Invalid OPP table\n", __func__); - return -EINVAL; - } - - val = prop->value; - while (nr) { - unsigned long freq = be32_to_cpup(val++) * 1000; - unsigned long volt = be32_to_cpup(val++); - - if (_opp_add_v1(dev, freq, volt, false)) - dev_warn(dev, "%s: Failed to add OPP %ld\n", - __func__, freq); - nr -= 2; - } - - return 0; -} /** - * dev_pm_opp_of_add_table() - Initialize opp table from device tree + * dev_pm_opp_remove_table() - Free all OPPs associated with the device * @dev: device pointer used to lookup OPP table. * - * Register the initial OPP table with the OPP library for given device. + * Free both OPPs created using static entries present in DT and the + * dynamically added entries. * * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function indirectly uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - * -ENODEV when 'operating-points' property is not found or is invalid data - * in device node. - * -ENODATA when empty 'operating-points' property is found - * -EINVAL when invalid entries are found in opp-v2 table */ -int dev_pm_opp_of_add_table(struct device *dev) +void dev_pm_opp_remove_table(struct device *dev) { - struct device_node *opp_np; - int ret; - - /* - * OPPs have two version of bindings now. The older one is deprecated, - * try for the new binding first. - */ - opp_np = _of_get_opp_desc_node(dev); - if (!opp_np) { - /* - * Try old-deprecated bindings for backward compatibility with - * older dtbs. - */ - return _of_add_opp_table_v1(dev); - } - - ret = _of_add_opp_table_v2(dev, opp_np); - of_node_put(opp_np); - - return ret; + _dev_pm_opp_remove_table(dev, true); } -EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); -#endif +EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table); diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c index ba2bdbd932ef3..83d6e7ba1a343 100644 --- a/drivers/base/power/opp/cpu.c +++ b/drivers/base/power/opp/cpu.c @@ -18,7 +18,6 @@ #include <linux/err.h> #include <linux/errno.h> #include <linux/export.h> -#include <linux/of.h> #include <linux/slab.h> #include "opp.h" @@ -119,8 +118,66 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev, EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); #endif /* CONFIG_CPU_FREQ */ -/* Required only for V1 bindings, as v2 can manage it from DT itself */ -int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) +void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of) +{ + struct device *cpu_dev; + int cpu; + + WARN_ON(cpumask_empty(cpumask)); + + for_each_cpu(cpu, cpumask) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + cpu); + continue; + } + + if (of) + dev_pm_opp_of_remove_table(cpu_dev); + else + dev_pm_opp_remove_table(cpu_dev); + } +} + +/** + * dev_pm_opp_cpumask_remove_table() - Removes OPP table for @cpumask + * @cpumask: cpumask for which OPP table needs to be removed + * + * This removes the OPP tables for CPUs present in the @cpumask. + * This should be used to remove all the OPPs entries associated with + * the cpus in @cpumask. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask) +{ + _dev_pm_opp_cpumask_remove_table(cpumask, false); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_remove_table); + +/** + * dev_pm_opp_set_sharing_cpus() - Mark OPP table as shared by few CPUs + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask of the CPUs which share the OPP table with @cpu_dev + * + * This marks OPP table of the @cpu_dev as shared by the CPUs present in + * @cpumask. + * + * Returns -ENODEV if OPP table isn't already present. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, + const struct cpumask *cpumask) { struct opp_device *opp_dev; struct opp_table *opp_table; @@ -131,7 +188,7 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) opp_table = _find_opp_table(cpu_dev); if (IS_ERR(opp_table)) { - ret = -EINVAL; + ret = PTR_ERR(opp_table); goto unlock; } @@ -152,6 +209,9 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) __func__, cpu); continue; } + + /* Mark opp-table as multiple CPUs are sharing it now */ + opp_table->shared_opp = true; } unlock: mutex_unlock(&opp_table_lock); @@ -160,112 +220,47 @@ unlock: } EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus); -#ifdef CONFIG_OF -void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask) -{ - struct device *cpu_dev; - int cpu; - - WARN_ON(cpumask_empty(cpumask)); - - for_each_cpu(cpu, cpumask) { - cpu_dev = get_cpu_device(cpu); - if (!cpu_dev) { - pr_err("%s: failed to get cpu%d device\n", __func__, - cpu); - continue; - } - - dev_pm_opp_of_remove_table(cpu_dev); - } -} -EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table); - -int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask) -{ - struct device *cpu_dev; - int cpu, ret = 0; - - WARN_ON(cpumask_empty(cpumask)); - - for_each_cpu(cpu, cpumask) { - cpu_dev = get_cpu_device(cpu); - if (!cpu_dev) { - pr_err("%s: failed to get cpu%d device\n", __func__, - cpu); - continue; - } - - ret = dev_pm_opp_of_add_table(cpu_dev); - if (ret) { - pr_err("%s: couldn't find opp table for cpu:%d, %d\n", - __func__, cpu, ret); - - /* Free all other OPPs */ - dev_pm_opp_of_cpumask_remove_table(cpumask); - break; - } - } - - return ret; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table); - -/* - * Works only for OPP v2 bindings. +/** + * dev_pm_opp_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with @cpu_dev + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask to update with information of sharing CPUs + * + * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev. * - * Returns -ENOENT if operating-points-v2 bindings aren't supported. + * Returns -ENODEV if OPP table isn't already present. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. */ -int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) +int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { - struct device_node *np, *tmp_np; - struct device *tcpu_dev; - int cpu, ret = 0; - - /* Get OPP descriptor node */ - np = _of_get_opp_desc_node(cpu_dev); - if (!np) { - dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__); - return -ENOENT; - } - - cpumask_set_cpu(cpu_dev->id, cpumask); - - /* OPPs are shared ? */ - if (!of_property_read_bool(np, "opp-shared")) - goto put_cpu_node; - - for_each_possible_cpu(cpu) { - if (cpu == cpu_dev->id) - continue; + struct opp_device *opp_dev; + struct opp_table *opp_table; + int ret = 0; - tcpu_dev = get_cpu_device(cpu); - if (!tcpu_dev) { - dev_err(cpu_dev, "%s: failed to get cpu%d device\n", - __func__, cpu); - ret = -ENODEV; - goto put_cpu_node; - } + mutex_lock(&opp_table_lock); - /* Get OPP descriptor node */ - tmp_np = _of_get_opp_desc_node(tcpu_dev); - if (!tmp_np) { - dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n", - __func__); - ret = -ENOENT; - goto put_cpu_node; - } + opp_table = _find_opp_table(cpu_dev); + if (IS_ERR(opp_table)) { + ret = PTR_ERR(opp_table); + goto unlock; + } - /* CPUs are sharing opp node */ - if (np == tmp_np) - cpumask_set_cpu(cpu, cpumask); + cpumask_clear(cpumask); - of_node_put(tmp_np); + if (opp_table->shared_opp) { + list_for_each_entry(opp_dev, &opp_table->dev_list, node) + cpumask_set_cpu(opp_dev->dev->id, cpumask); + } else { + cpumask_set_cpu(cpu_dev->id, cpumask); } -put_cpu_node: - of_node_put(np); +unlock: + mutex_unlock(&opp_table_lock); + return ret; } -EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus); -#endif +EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus); diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c new file mode 100644 index 0000000000000..94d2010558e36 --- /dev/null +++ b/drivers/base/power/opp/of.c @@ -0,0 +1,591 @@ +/* + * Generic OPP OF helpers + * + * Copyright (C) 2009-2010 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/export.h> + +#include "opp.h" + +static struct opp_table *_managed_opp(const struct device_node *np) +{ + struct opp_table *opp_table; + + list_for_each_entry_rcu(opp_table, &opp_tables, node) { + if (opp_table->np == np) { + /* + * Multiple devices can point to the same OPP table and + * so will have same node-pointer, np. + * + * But the OPPs will be considered as shared only if the + * OPP table contains a "opp-shared" property. + */ + return opp_table->shared_opp ? opp_table : NULL; + } + } + + return NULL; +} + +void _of_init_opp_table(struct opp_table *opp_table, struct device *dev) +{ + struct device_node *np; + + /* + * Only required for backward compatibility with v1 bindings, but isn't + * harmful for other cases. And so we do it unconditionally. + */ + np = of_node_get(dev->of_node); + if (np) { + u32 val; + + if (!of_property_read_u32(np, "clock-latency", &val)) + opp_table->clock_latency_ns_max = val; + of_property_read_u32(np, "voltage-tolerance", + &opp_table->voltage_tolerance_v1); + of_node_put(np); + } +} + +static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table, + struct device_node *np) +{ + unsigned int count = opp_table->supported_hw_count; + u32 version; + int ret; + + if (!opp_table->supported_hw) + return true; + + while (count--) { + ret = of_property_read_u32_index(np, "opp-supported-hw", count, + &version); + if (ret) { + dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n", + __func__, count, ret); + return false; + } + + /* Both of these are bitwise masks of the versions */ + if (!(version & opp_table->supported_hw[count])) + return false; + } + + return true; +} + +/* TODO: Support multiple regulators */ +static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, + struct opp_table *opp_table) +{ + u32 microvolt[3] = {0}; + u32 val; + int count, ret; + struct property *prop = NULL; + char name[NAME_MAX]; + + /* Search for "opp-microvolt-<name>" */ + if (opp_table->prop_name) { + snprintf(name, sizeof(name), "opp-microvolt-%s", + opp_table->prop_name); + prop = of_find_property(opp->np, name, NULL); + } + + if (!prop) { + /* Search for "opp-microvolt" */ + sprintf(name, "opp-microvolt"); + prop = of_find_property(opp->np, name, NULL); + + /* Missing property isn't a problem, but an invalid entry is */ + if (!prop) + return 0; + } + + count = of_property_count_u32_elems(opp->np, name); + if (count < 0) { + dev_err(dev, "%s: Invalid %s property (%d)\n", + __func__, name, count); + return count; + } + + /* There can be one or three elements here */ + if (count != 1 && count != 3) { + dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n", + __func__, name, count); + return -EINVAL; + } + + ret = of_property_read_u32_array(opp->np, name, microvolt, count); + if (ret) { + dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret); + return -EINVAL; + } + + opp->u_volt = microvolt[0]; + + if (count == 1) { + opp->u_volt_min = opp->u_volt; + opp->u_volt_max = opp->u_volt; + } else { + opp->u_volt_min = microvolt[1]; + opp->u_volt_max = microvolt[2]; + } + + /* Search for "opp-microamp-<name>" */ + prop = NULL; + if (opp_table->prop_name) { + snprintf(name, sizeof(name), "opp-microamp-%s", + opp_table->prop_name); + prop = of_find_property(opp->np, name, NULL); + } + + if (!prop) { + /* Search for "opp-microamp" */ + sprintf(name, "opp-microamp"); + prop = of_find_property(opp->np, name, NULL); + } + + if (prop && !of_property_read_u32(opp->np, name, &val)) + opp->u_amp = val; + + return 0; +} + +/** + * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT + * entries + * @dev: device pointer used to lookup OPP table. + * + * Free OPPs created using static entries present in DT. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function indirectly uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_of_remove_table(struct device *dev) +{ + _dev_pm_opp_remove_table(dev, false); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table); + +/* Returns opp descriptor node for a device, caller must do of_node_put() */ +struct device_node *_of_get_opp_desc_node(struct device *dev) +{ + /* + * TODO: Support for multiple OPP tables. + * + * There should be only ONE phandle present in "operating-points-v2" + * property. + */ + + return of_parse_phandle(dev->of_node, "operating-points-v2", 0); +} + +/** + * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings) + * @dev: device for which we do this operation + * @np: device node + * + * This function adds an opp definition to the opp table and returns status. The + * opp can be controlled using dev_pm_opp_enable/disable functions and may be + * removed by dev_pm_opp_remove. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -EINVAL Failed parsing the OPP node + */ +static int _opp_add_static_v2(struct device *dev, struct device_node *np) +{ + struct opp_table *opp_table; + struct dev_pm_opp *new_opp; + u64 rate; + u32 val; + int ret; + + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock); + + new_opp = _allocate_opp(dev, &opp_table); + if (!new_opp) { + ret = -ENOMEM; + goto unlock; + } + + ret = of_property_read_u64(np, "opp-hz", &rate); + if (ret < 0) { + dev_err(dev, "%s: opp-hz not found\n", __func__); + goto free_opp; + } + + /* Check if the OPP supports hardware's hierarchy of versions or not */ + if (!_opp_is_supported(dev, opp_table, np)) { + dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate); + goto free_opp; + } + + /* + * Rate is defined as an unsigned long in clk API, and so casting + * explicitly to its type. Must be fixed once rate is 64 bit + * guaranteed in clk API. + */ + new_opp->rate = (unsigned long)rate; + new_opp->turbo = of_property_read_bool(np, "turbo-mode"); + + new_opp->np = np; + new_opp->dynamic = false; + new_opp->available = true; + + if (!of_property_read_u32(np, "clock-latency-ns", &val)) + new_opp->clock_latency_ns = val; + + ret = opp_parse_supplies(new_opp, dev, opp_table); + if (ret) + goto free_opp; + + ret = _opp_add(dev, new_opp, opp_table); + if (ret) + goto free_opp; + + /* OPP to select on device suspend */ + if (of_property_read_bool(np, "opp-suspend")) { + if (opp_table->suspend_opp) { + dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n", + __func__, opp_table->suspend_opp->rate, + new_opp->rate); + } else { + new_opp->suspend = true; + opp_table->suspend_opp = new_opp; + } + } + + if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max) + opp_table->clock_latency_ns_max = new_opp->clock_latency_ns; + + mutex_unlock(&opp_table_lock); + + pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", + __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, + new_opp->u_volt_min, new_opp->u_volt_max, + new_opp->clock_latency_ns); + + /* + * Notify the changes in the availability of the operable + * frequency/voltage list. + */ + srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp); + return 0; + +free_opp: + _opp_remove(opp_table, new_opp, false); +unlock: + mutex_unlock(&opp_table_lock); + return ret; +} + +/* Initializes OPP tables based on new bindings */ +static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np) +{ + struct device_node *np; + struct opp_table *opp_table; + int ret = 0, count = 0; + + mutex_lock(&opp_table_lock); + + opp_table = _managed_opp(opp_np); + if (opp_table) { + /* OPPs are already managed */ + if (!_add_opp_dev(dev, opp_table)) + ret = -ENOMEM; + mutex_unlock(&opp_table_lock); + return ret; + } + mutex_unlock(&opp_table_lock); + + /* We have opp-table node now, iterate over it and add OPPs */ + for_each_available_child_of_node(opp_np, np) { + count++; + + ret = _opp_add_static_v2(dev, np); + if (ret) { + dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, + ret); + goto free_table; + } + } + + /* There should be one of more OPP defined */ + if (WARN_ON(!count)) + return -ENOENT; + + mutex_lock(&opp_table_lock); + + opp_table = _find_opp_table(dev); + if (WARN_ON(IS_ERR(opp_table))) { + ret = PTR_ERR(opp_table); + mutex_unlock(&opp_table_lock); + goto free_table; + } + + opp_table->np = opp_np; + opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared"); + + mutex_unlock(&opp_table_lock); + + return 0; + +free_table: + dev_pm_opp_of_remove_table(dev); + + return ret; +} + +/* Initializes OPP tables based on old-deprecated bindings */ +static int _of_add_opp_table_v1(struct device *dev) +{ + const struct property *prop; + const __be32 *val; + int nr; + + prop = of_find_property(dev->of_node, "operating-points", NULL); + if (!prop) + return -ENODEV; + if (!prop->value) + return -ENODATA; + + /* + * Each OPP is a set of tuples consisting of frequency and + * voltage like <freq-kHz vol-uV>. + */ + nr = prop->length / sizeof(u32); + if (nr % 2) { + dev_err(dev, "%s: Invalid OPP table\n", __func__); + return -EINVAL; + } + + val = prop->value; + while (nr) { + unsigned long freq = be32_to_cpup(val++) * 1000; + unsigned long volt = be32_to_cpup(val++); + + if (_opp_add_v1(dev, freq, volt, false)) + dev_warn(dev, "%s: Failed to add OPP %ld\n", + __func__, freq); + nr -= 2; + } + + return 0; +} + +/** + * dev_pm_opp_of_add_table() - Initialize opp table from device tree + * @dev: device pointer used to lookup OPP table. + * + * Register the initial OPP table with the OPP library for given device. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function indirectly uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -ENODEV when 'operating-points' property is not found or is invalid data + * in device node. + * -ENODATA when empty 'operating-points' property is found + * -EINVAL when invalid entries are found in opp-v2 table + */ +int dev_pm_opp_of_add_table(struct device *dev) +{ + struct device_node *opp_np; + int ret; + + /* + * OPPs have two version of bindings now. The older one is deprecated, + * try for the new binding first. + */ + opp_np = _of_get_opp_desc_node(dev); + if (!opp_np) { + /* + * Try old-deprecated bindings for backward compatibility with + * older dtbs. + */ + return _of_add_opp_table_v1(dev); + } + + ret = _of_add_opp_table_v2(dev, opp_np); + of_node_put(opp_np); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); + +/* CPU device specific helpers */ + +/** + * dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask + * @cpumask: cpumask for which OPP table needs to be removed + * + * This removes the OPP tables for CPUs present in the @cpumask. + * This should be used only to remove static entries created from DT. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask) +{ + _dev_pm_opp_cpumask_remove_table(cpumask, true); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table); + +/** + * dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask + * @cpumask: cpumask for which OPP table needs to be added. + * + * This adds the OPP tables for CPUs present in the @cpumask. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask) +{ + struct device *cpu_dev; + int cpu, ret = 0; + + WARN_ON(cpumask_empty(cpumask)); + + for_each_cpu(cpu, cpumask) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + cpu); + continue; + } + + ret = dev_pm_opp_of_add_table(cpu_dev); + if (ret) { + pr_err("%s: couldn't find opp table for cpu:%d, %d\n", + __func__, cpu, ret); + + /* Free all other OPPs */ + dev_pm_opp_of_cpumask_remove_table(cpumask); + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table); + +/* + * Works only for OPP v2 bindings. + * + * Returns -ENOENT if operating-points-v2 bindings aren't supported. + */ +/** + * dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with + * @cpu_dev using operating-points-v2 + * bindings. + * + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask to update with information of sharing CPUs + * + * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev. + * + * Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, + struct cpumask *cpumask) +{ + struct device_node *np, *tmp_np; + struct device *tcpu_dev; + int cpu, ret = 0; + + /* Get OPP descriptor node */ + np = _of_get_opp_desc_node(cpu_dev); + if (!np) { + dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__); + return -ENOENT; + } + + cpumask_set_cpu(cpu_dev->id, cpumask); + + /* OPPs are shared ? */ + if (!of_property_read_bool(np, "opp-shared")) + goto put_cpu_node; + + for_each_possible_cpu(cpu) { + if (cpu == cpu_dev->id) + continue; + + tcpu_dev = get_cpu_device(cpu); + if (!tcpu_dev) { + dev_err(cpu_dev, "%s: failed to get cpu%d device\n", + __func__, cpu); + ret = -ENODEV; + goto put_cpu_node; + } + + /* Get OPP descriptor node */ + tmp_np = _of_get_opp_desc_node(tcpu_dev); + if (!tmp_np) { + dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n", + __func__); + ret = -ENOENT; + goto put_cpu_node; + } + + /* CPUs are sharing opp node */ + if (np == tmp_np) + cpumask_set_cpu(cpu, cpumask); + + of_node_put(tmp_np); + } + +put_cpu_node: + of_node_put(np); + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus); diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index f67f806fcf3ae..20f3be22e060f 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -28,6 +28,8 @@ struct regulator; /* Lock to allow exclusive modification to the device and opp lists */ extern struct mutex opp_table_lock; +extern struct list_head opp_tables; + /* * Internal data structure organization with the OPP layer library is as * follows: @@ -183,6 +185,18 @@ struct opp_table { struct opp_table *_find_opp_table(struct device *dev); struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table); struct device_node *_of_get_opp_desc_node(struct device *dev); +void _dev_pm_opp_remove_table(struct device *dev, bool remove_all); +struct dev_pm_opp *_allocate_opp(struct device *dev, struct opp_table **opp_table); +int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table); +void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, bool notify); +int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, bool dynamic); +void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of); + +#ifdef CONFIG_OF +void _of_init_opp_table(struct opp_table *opp_table, struct device *dev); +#else +static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev) {} +#endif #ifdef CONFIG_DEBUG_FS void opp_debug_remove_one(struct dev_pm_opp *opp); diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 4c7055009bd6a..b746904185045 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1506,11 +1506,16 @@ int pm_runtime_force_resume(struct device *dev) goto out; } - ret = callback(dev); + ret = pm_runtime_set_active(dev); if (ret) goto out; - pm_runtime_set_active(dev); + ret = callback(dev); + if (ret) { + pm_runtime_set_suspended(dev); + goto out; + } + pm_runtime_mark_last_busy(dev); out: pm_runtime_enable(dev); diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index a7f45853c1033..b7445b6ae5a4b 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -18,7 +18,11 @@ config CPU_FREQ if CPU_FREQ +config CPU_FREQ_GOV_ATTR_SET + bool + config CPU_FREQ_GOV_COMMON + select CPU_FREQ_GOV_ATTR_SET select IRQ_WORK bool @@ -103,6 +107,17 @@ config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE Be aware that not all cpufreq drivers support the conservative governor. If unsure have a look at the help section of the driver. Fallback governor will be the performance governor. + +config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL + bool "schedutil" + depends on SMP + select CPU_FREQ_GOV_SCHEDUTIL + select CPU_FREQ_GOV_PERFORMANCE + help + Use the 'schedutil' CPUFreq governor by default. If unsure, + have a look at the help section of that governor. The fallback + governor will be 'performance'. + endchoice config CPU_FREQ_GOV_PERFORMANCE @@ -184,6 +199,26 @@ config CPU_FREQ_GOV_CONSERVATIVE If in doubt, say N. +config CPU_FREQ_GOV_SCHEDUTIL + tristate "'schedutil' cpufreq policy governor" + depends on CPU_FREQ && SMP + select CPU_FREQ_GOV_ATTR_SET + select IRQ_WORK + help + This governor makes decisions based on the utilization data provided + by the scheduler. It sets the CPU frequency to be proportional to + the utilization/capacity ratio coming from the scheduler. If the + utilization is frequency-invariant, the new frequency is also + proportional to the maximum available frequency. If that is not the + case, it is proportional to the current frequency of the CPU. The + frequency tipping point is at utilization/capacity equal to 80% in + both cases. + + To compile this driver as a module, choose M here: the module will + be called cpufreq_schedutil. + + If in doubt, say N. + comment "CPU frequency scaling drivers" config CPUFREQ_DT @@ -191,6 +226,7 @@ config CPUFREQ_DT depends on HAVE_CLK && OF # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y: depends on !CPU_THERMAL || THERMAL + select CPUFREQ_DT_PLATDEV select PM_OPP help This adds a generic DT based cpufreq driver for frequency management. @@ -199,6 +235,15 @@ config CPUFREQ_DT If in doubt, say N. +config CPUFREQ_DT_PLATDEV + bool + help + This adds a generic DT based cpufreq platdev driver for frequency + management. This creates a 'cpufreq-dt' platform device, on the + supported platforms. + + If in doubt, say N. + if X86 source "drivers/cpufreq/Kconfig.x86" endif diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 14b1f9393b057..d89b8afe23b69 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -50,15 +50,6 @@ config ARM_HIGHBANK_CPUFREQ If in doubt, say N. -config ARM_HISI_ACPU_CPUFREQ - tristate "Hisilicon ACPU CPUfreq driver" - depends on ARCH_HISI && CPUFREQ_DT - select PM_OPP - help - This enables the hisilicon ACPU CPUfreq driver. - - If in doubt, say N. - config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6 cpufreq support" depends on ARCH_MXC diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index c59bdcb832170..adbd1de1cea55 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -5,6 +5,7 @@ config X86_INTEL_PSTATE bool "Intel P state control" depends on X86 + select ACPI_PROCESSOR if ACPI help This driver provides a P state for Intel core processors. The driver implements an internal governor and will become diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 9e63fb1b09f81..e1eb11ee35708 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -11,8 +11,10 @@ obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o +obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o +obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o ################################################################################## # x86 drivers. @@ -53,7 +55,6 @@ obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o -obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o @@ -78,6 +79,7 @@ obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o +obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o ################################################################################## diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index fb5712141040a..32a15052f363f 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -25,6 +25,8 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -50,8 +52,6 @@ MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); MODULE_LICENSE("GPL"); -#define PFX "acpi-cpufreq: " - enum { UNDEFINED_CAPABLE = 0, SYSTEM_INTEL_MSR_CAPABLE, @@ -65,7 +65,6 @@ enum { #define MSR_K7_HWCR_CPB_DIS (1ULL << 25) struct acpi_cpufreq_data { - struct cpufreq_frequency_table *freq_table; unsigned int resume; unsigned int cpu_feature; unsigned int acpi_perf_cpu; @@ -200,8 +199,9 @@ static int check_amd_hwpstate_cpu(unsigned int cpuid) return cpu_has(cpu, X86_FEATURE_HW_PSTATE); } -static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) +static unsigned extract_io(struct cpufreq_policy *policy, u32 value) { + struct acpi_cpufreq_data *data = policy->driver_data; struct acpi_processor_performance *perf; int i; @@ -209,13 +209,14 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) for (i = 0; i < perf->state_count; i++) { if (value == perf->states[i].status) - return data->freq_table[i].frequency; + return policy->freq_table[i].frequency; } return 0; } -static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) +static unsigned extract_msr(struct cpufreq_policy *policy, u32 msr) { + struct acpi_cpufreq_data *data = policy->driver_data; struct cpufreq_frequency_table *pos; struct acpi_processor_performance *perf; @@ -226,20 +227,22 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) perf = to_perf_data(data); - cpufreq_for_each_entry(pos, data->freq_table) + cpufreq_for_each_entry(pos, policy->freq_table) if (msr == perf->states[pos->driver_data].status) return pos->frequency; - return data->freq_table[0].frequency; + return policy->freq_table[0].frequency; } -static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) +static unsigned extract_freq(struct cpufreq_policy *policy, u32 val) { + struct acpi_cpufreq_data *data = policy->driver_data; + switch (data->cpu_feature) { case SYSTEM_INTEL_MSR_CAPABLE: case SYSTEM_AMD_MSR_CAPABLE: - return extract_msr(val, data); + return extract_msr(policy, val); case SYSTEM_IO_CAPABLE: - return extract_io(val, data); + return extract_io(policy, val); default: return 0; } @@ -374,11 +377,11 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu) return 0; data = policy->driver_data; - if (unlikely(!data || !data->freq_table)) + if (unlikely(!data || !policy->freq_table)) return 0; - cached_freq = data->freq_table[to_perf_data(data)->state].frequency; - freq = extract_freq(get_cur_val(cpumask_of(cpu), data), data); + cached_freq = policy->freq_table[to_perf_data(data)->state].frequency; + freq = extract_freq(policy, get_cur_val(cpumask_of(cpu), data)); if (freq != cached_freq) { /* * The dreaded BIOS frequency change behind our back. @@ -392,14 +395,15 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu) return freq; } -static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, - struct acpi_cpufreq_data *data) +static unsigned int check_freqs(struct cpufreq_policy *policy, + const struct cpumask *mask, unsigned int freq) { + struct acpi_cpufreq_data *data = policy->driver_data; unsigned int cur_freq; unsigned int i; for (i = 0; i < 100; i++) { - cur_freq = extract_freq(get_cur_val(mask, data), data); + cur_freq = extract_freq(policy, get_cur_val(mask, data)); if (cur_freq == freq) return 1; udelay(10); @@ -416,12 +420,12 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, unsigned int next_perf_state = 0; /* Index into perf table */ int result = 0; - if (unlikely(data == NULL || data->freq_table == NULL)) { + if (unlikely(!data)) { return -ENODEV; } perf = to_perf_data(data); - next_perf_state = data->freq_table[index].driver_data; + next_perf_state = policy->freq_table[index].driver_data; if (perf->state == next_perf_state) { if (unlikely(data->resume)) { pr_debug("Called after resume, resetting to P%d\n", @@ -444,8 +448,8 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, drv_write(data, mask, perf->states[next_perf_state].control); if (acpi_pstate_strict) { - if (!check_freqs(mask, data->freq_table[index].frequency, - data)) { + if (!check_freqs(policy, mask, + policy->freq_table[index].frequency)) { pr_debug("acpi_cpufreq_target failed (%d)\n", policy->cpu); result = -EAGAIN; @@ -458,6 +462,43 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, return result; } +unsigned int acpi_cpufreq_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + struct acpi_processor_performance *perf; + struct cpufreq_frequency_table *entry; + unsigned int next_perf_state, next_freq, freq; + + /* + * Find the closest frequency above target_freq. + * + * The table is sorted in the reverse order with respect to the + * frequency and all of the entries are valid (see the initialization). + */ + entry = policy->freq_table; + do { + entry++; + freq = entry->frequency; + } while (freq >= target_freq && freq != CPUFREQ_TABLE_END); + entry--; + next_freq = entry->frequency; + next_perf_state = entry->driver_data; + + perf = to_perf_data(data); + if (perf->state == next_perf_state) { + if (unlikely(data->resume)) + data->resume = 0; + else + return next_freq; + } + + data->cpu_freq_write(&perf->control_register, + perf->states[next_perf_state].control); + perf->state = next_perf_state; + return next_freq; +} + static unsigned long acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) { @@ -611,10 +652,7 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) if ((c->x86 == 15) && (c->x86_model == 6) && (c->x86_mask == 8)) { - printk(KERN_INFO "acpi-cpufreq: Intel(R) " - "Xeon(R) 7100 Errata AL30, processors may " - "lock up on frequency changes: disabling " - "acpi-cpufreq.\n"); + pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n"); return -ENODEV; } } @@ -631,6 +669,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) unsigned int result = 0; struct cpuinfo_x86 *c = &cpu_data(policy->cpu); struct acpi_processor_performance *perf; + struct cpufreq_frequency_table *freq_table; #ifdef CONFIG_SMP static int blacklisted; #endif @@ -690,7 +729,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) cpumask_copy(data->freqdomain_cpus, topology_sibling_cpumask(cpu)); policy->shared_type = CPUFREQ_SHARED_TYPE_HW; - pr_info_once(PFX "overriding BIOS provided _PSD data\n"); + pr_info_once("overriding BIOS provided _PSD data\n"); } #endif @@ -742,9 +781,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) goto err_unreg; } - data->freq_table = kzalloc(sizeof(*data->freq_table) * + freq_table = kzalloc(sizeof(*freq_table) * (perf->state_count+1), GFP_KERNEL); - if (!data->freq_table) { + if (!freq_table) { result = -ENOMEM; goto err_unreg; } @@ -762,30 +801,29 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO - "P-state transition latency capped at 20 uS\n"); + pr_info_once("P-state transition latency capped at 20 uS\n"); } /* table init */ for (i = 0; i < perf->state_count; i++) { if (i > 0 && perf->states[i].core_frequency >= - data->freq_table[valid_states-1].frequency / 1000) + freq_table[valid_states-1].frequency / 1000) continue; - data->freq_table[valid_states].driver_data = i; - data->freq_table[valid_states].frequency = + freq_table[valid_states].driver_data = i; + freq_table[valid_states].frequency = perf->states[i].core_frequency * 1000; valid_states++; } - data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; + freq_table[valid_states].frequency = CPUFREQ_TABLE_END; perf->state = 0; - result = cpufreq_table_validate_and_show(policy, data->freq_table); + result = cpufreq_table_validate_and_show(policy, freq_table); if (result) goto err_freqfree; if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) - printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); + pr_warn(FW_WARN "P-state 0 is not max freq\n"); switch (perf->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: @@ -821,10 +859,13 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) */ data->resume = 1; + policy->fast_switch_possible = !acpi_pstate_strict && + !(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY); + return result; err_freqfree: - kfree(data->freq_table); + kfree(freq_table); err_unreg: acpi_processor_unregister_performance(cpu); err_free_mask: @@ -842,13 +883,12 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) pr_debug("acpi_cpufreq_cpu_exit\n"); - if (data) { - policy->driver_data = NULL; - acpi_processor_unregister_performance(data->acpi_perf_cpu); - free_cpumask_var(data->freqdomain_cpus); - kfree(data->freq_table); - kfree(data); - } + policy->fast_switch_possible = false; + policy->driver_data = NULL; + acpi_processor_unregister_performance(data->acpi_perf_cpu); + free_cpumask_var(data->freqdomain_cpus); + kfree(policy->freq_table); + kfree(data); return 0; } @@ -876,6 +916,7 @@ static struct freq_attr *acpi_cpufreq_attr[] = { static struct cpufreq_driver acpi_cpufreq_driver = { .verify = cpufreq_generic_frequency_table_verify, .target_index = acpi_cpufreq_target, + .fast_switch = acpi_cpufreq_fast_switch, .bios_limit = acpi_processor_get_bios_limit, .init = acpi_cpufreq_cpu_init, .exit = acpi_cpufreq_cpu_exit, diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index c251247ae6613..418042201e6da 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -298,7 +298,8 @@ static int merge_cluster_tables(void) return 0; } -static void _put_cluster_clk_and_freq_table(struct device *cpu_dev) +static void _put_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) { u32 cluster = raw_cpu_to_cluster(cpu_dev->id); @@ -308,11 +309,12 @@ static void _put_cluster_clk_and_freq_table(struct device *cpu_dev) clk_put(clk[cluster]); dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); if (arm_bL_ops->free_opp_table) - arm_bL_ops->free_opp_table(cpu_dev); + arm_bL_ops->free_opp_table(cpumask); dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster); } -static void put_cluster_clk_and_freq_table(struct device *cpu_dev) +static void put_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) { u32 cluster = cpu_to_cluster(cpu_dev->id); int i; @@ -321,7 +323,7 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev) return; if (cluster < MAX_CLUSTERS) - return _put_cluster_clk_and_freq_table(cpu_dev); + return _put_cluster_clk_and_freq_table(cpu_dev, cpumask); for_each_present_cpu(i) { struct device *cdev = get_cpu_device(i); @@ -330,14 +332,15 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev) return; } - _put_cluster_clk_and_freq_table(cdev); + _put_cluster_clk_and_freq_table(cdev, cpumask); } /* free virtual table */ kfree(freq_table[cluster]); } -static int _get_cluster_clk_and_freq_table(struct device *cpu_dev) +static int _get_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) { u32 cluster = raw_cpu_to_cluster(cpu_dev->id); int ret; @@ -345,7 +348,7 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev) if (freq_table[cluster]) return 0; - ret = arm_bL_ops->init_opp_table(cpu_dev); + ret = arm_bL_ops->init_opp_table(cpumask); if (ret) { dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n", __func__, cpu_dev->id, ret); @@ -374,14 +377,15 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev) free_opp_table: if (arm_bL_ops->free_opp_table) - arm_bL_ops->free_opp_table(cpu_dev); + arm_bL_ops->free_opp_table(cpumask); out: dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__, cluster); return ret; } -static int get_cluster_clk_and_freq_table(struct device *cpu_dev) +static int get_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) { u32 cluster = cpu_to_cluster(cpu_dev->id); int i, ret; @@ -390,7 +394,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev) return 0; if (cluster < MAX_CLUSTERS) { - ret = _get_cluster_clk_and_freq_table(cpu_dev); + ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask); if (ret) atomic_dec(&cluster_usage[cluster]); return ret; @@ -407,7 +411,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev) return -ENODEV; } - ret = _get_cluster_clk_and_freq_table(cdev); + ret = _get_cluster_clk_and_freq_table(cdev, cpumask); if (ret) goto put_clusters; } @@ -433,7 +437,7 @@ put_clusters: return -ENODEV; } - _put_cluster_clk_and_freq_table(cdev); + _put_cluster_clk_and_freq_table(cdev, cpumask); } atomic_dec(&cluster_usage[cluster]); @@ -455,18 +459,6 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) return -ENODEV; } - ret = get_cluster_clk_and_freq_table(cpu_dev); - if (ret) - return ret; - - ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]); - if (ret) { - dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n", - policy->cpu, cur_cluster); - put_cluster_clk_and_freq_table(cpu_dev); - return ret; - } - if (cur_cluster < MAX_CLUSTERS) { int cpu; @@ -479,6 +471,18 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER; } + ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus); + if (ret) + return ret; + + ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]); + if (ret) { + dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n", + policy->cpu, cur_cluster); + put_cluster_clk_and_freq_table(cpu_dev, policy->cpus); + return ret; + } + if (arm_bL_ops->get_transition_latency) policy->cpuinfo.transition_latency = arm_bL_ops->get_transition_latency(cpu_dev); @@ -509,7 +513,7 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy) return -ENODEV; } - put_cluster_clk_and_freq_table(cpu_dev); + put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus); dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu); return 0; diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h index b88889d9387ed..184d7c3a112a8 100644 --- a/drivers/cpufreq/arm_big_little.h +++ b/drivers/cpufreq/arm_big_little.h @@ -30,11 +30,11 @@ struct cpufreq_arm_bL_ops { * This must set opp table for cpu_dev in a similar way as done by * dev_pm_opp_of_add_table(). */ - int (*init_opp_table)(struct device *cpu_dev); + int (*init_opp_table)(const struct cpumask *cpumask); /* Optional */ int (*get_transition_latency)(struct device *cpu_dev); - void (*free_opp_table)(struct device *cpu_dev); + void (*free_opp_table)(const struct cpumask *cpumask); }; int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops); diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 16ddeefe94433..39b3f51d9a30a 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -43,23 +43,6 @@ static struct device_node *get_cpu_node_with_valid_op(int cpu) return np; } -static int dt_init_opp_table(struct device *cpu_dev) -{ - struct device_node *np; - int ret; - - np = of_node_get(cpu_dev->of_node); - if (!np) { - pr_err("failed to find cpu%d node\n", cpu_dev->id); - return -ENOENT; - } - - ret = dev_pm_opp_of_add_table(cpu_dev); - of_node_put(np); - - return ret; -} - static int dt_get_transition_latency(struct device *cpu_dev) { struct device_node *np; @@ -81,8 +64,8 @@ static int dt_get_transition_latency(struct device *cpu_dev) static struct cpufreq_arm_bL_ops dt_bL_ops = { .name = "dt-bl", .get_transition_latency = dt_get_transition_latency, - .init_opp_table = dt_init_opp_table, - .free_opp_table = dev_pm_opp_of_remove_table, + .init_opp_table = dev_pm_opp_of_cpumask_add_table, + .free_opp_table = dev_pm_opp_of_cpumask_remove_table, }; static int generic_bL_probe(struct platform_device *pdev) diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index 7c0bdfb1a2ca4..8882b8e2ecd0d 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -173,4 +173,25 @@ out: return -ENODEV; } +static void __exit cppc_cpufreq_exit(void) +{ + struct cpudata *cpu; + int i; + + cpufreq_unregister_driver(&cppc_cpufreq_driver); + + for_each_possible_cpu(i) { + cpu = all_cpu_data[i]; + free_cpumask_var(cpu->shared_cpu_map); + kfree(cpu); + } + + kfree(all_cpu_data); +} + +module_exit(cppc_cpufreq_exit); +MODULE_AUTHOR("Ashwin Chaugule"); +MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec"); +MODULE_LICENSE("GPL"); + late_initcall(cppc_cpufreq_init); diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c new file mode 100644 index 0000000000000..3646b143bbf53 --- /dev/null +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2016 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +static const struct of_device_id machines[] __initconst = { + { .compatible = "allwinner,sun4i-a10", }, + { .compatible = "allwinner,sun5i-a10s", }, + { .compatible = "allwinner,sun5i-a13", }, + { .compatible = "allwinner,sun5i-r8", }, + { .compatible = "allwinner,sun6i-a31", }, + { .compatible = "allwinner,sun6i-a31s", }, + { .compatible = "allwinner,sun7i-a20", }, + { .compatible = "allwinner,sun8i-a23", }, + { .compatible = "allwinner,sun8i-a33", }, + { .compatible = "allwinner,sun8i-a83t", }, + { .compatible = "allwinner,sun8i-h3", }, + + { .compatible = "hisilicon,hi6220", }, + + { .compatible = "fsl,imx27", }, + { .compatible = "fsl,imx51", }, + { .compatible = "fsl,imx53", }, + { .compatible = "fsl,imx7d", }, + + { .compatible = "marvell,berlin", }, + + { .compatible = "samsung,exynos3250", }, + { .compatible = "samsung,exynos4210", }, + { .compatible = "samsung,exynos4212", }, + { .compatible = "samsung,exynos4412", }, + { .compatible = "samsung,exynos5250", }, +#ifndef CONFIG_BL_SWITCHER + { .compatible = "samsung,exynos5420", }, + { .compatible = "samsung,exynos5800", }, +#endif + + { .compatible = "renesas,emev2", }, + { .compatible = "renesas,r7s72100", }, + { .compatible = "renesas,r8a73a4", }, + { .compatible = "renesas,r8a7740", }, + { .compatible = "renesas,r8a7778", }, + { .compatible = "renesas,r8a7779", }, + { .compatible = "renesas,r8a7790", }, + { .compatible = "renesas,r8a7791", }, + { .compatible = "renesas,r8a7793", }, + { .compatible = "renesas,r8a7794", }, + { .compatible = "renesas,sh73a0", }, + + { .compatible = "rockchip,rk2928", }, + { .compatible = "rockchip,rk3036", }, + { .compatible = "rockchip,rk3066a", }, + { .compatible = "rockchip,rk3066b", }, + { .compatible = "rockchip,rk3188", }, + { .compatible = "rockchip,rk3228", }, + { .compatible = "rockchip,rk3288", }, + { .compatible = "rockchip,rk3366", }, + { .compatible = "rockchip,rk3368", }, + { .compatible = "rockchip,rk3399", }, + + { .compatible = "sigma,tango4" }, + + { .compatible = "ti,omap2", }, + { .compatible = "ti,omap3", }, + { .compatible = "ti,omap4", }, + { .compatible = "ti,omap5", }, + + { .compatible = "xlnx,zynq-7000", }, +}; + +static int __init cpufreq_dt_platdev_init(void) +{ + struct device_node *np = of_find_node_by_path("/"); + + if (!np) + return -ENODEV; + + if (!of_match_node(machines, np)) + return -ENODEV; + + of_node_put(of_root); + + return PTR_ERR_OR_ZERO(platform_device_register_simple("cpufreq-dt", -1, + NULL, 0)); +} +device_initcall(cpufreq_dt_platdev_init); diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 5f8dbe640a202..3957de801ae82 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -15,7 +15,6 @@ #include <linux/cpu.h> #include <linux/cpu_cooling.h> #include <linux/cpufreq.h> -#include <linux/cpufreq-dt.h> #include <linux/cpumask.h> #include <linux/err.h> #include <linux/module.h> @@ -147,7 +146,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) struct clk *cpu_clk; struct dev_pm_opp *suspend_opp; unsigned int transition_latency; - bool opp_v1 = false; + bool fallback = false; const char *name; int ret; @@ -167,14 +166,16 @@ static int cpufreq_init(struct cpufreq_policy *policy) /* Get OPP-sharing information from "operating-points-v2" bindings */ ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus); if (ret) { + if (ret != -ENOENT) + goto out_put_clk; + /* * operating-points-v2 not supported, fallback to old method of - * finding shared-OPPs for backward compatibility. + * finding shared-OPPs for backward compatibility if the + * platform hasn't set sharing CPUs. */ - if (ret == -ENOENT) - opp_v1 = true; - else - goto out_put_clk; + if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus)) + fallback = true; } /* @@ -214,11 +215,8 @@ static int cpufreq_init(struct cpufreq_policy *policy) goto out_free_opp; } - if (opp_v1) { - struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data(); - - if (!pd || !pd->independent_clocks) - cpumask_setall(policy->cpus); + if (fallback) { + cpumask_setall(policy->cpus); /* * OPP tables are initialized only for policy->cpu, do it for diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c index db69eeb501a7d..5503d491b0160 100644 --- a/drivers/cpufreq/cpufreq-nforce2.c +++ b/drivers/cpufreq/cpufreq-nforce2.c @@ -7,6 +7,8 @@ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -56,8 +58,6 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, "Minimum FSB to use, if not defined: current FSB - 50"); -#define PFX "cpufreq-nforce2: " - /** * nforce2_calc_fsb - calculate FSB * @pll: PLL value @@ -174,13 +174,13 @@ static int nforce2_set_fsb(unsigned int fsb) int pll = 0; if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); + pr_err("FSB %d is out of range!\n", fsb); return -EINVAL; } tfsb = nforce2_fsb_read(0); if (!tfsb) { - printk(KERN_ERR PFX "Error while reading the FSB\n"); + pr_err("Error while reading the FSB\n"); return -EINVAL; } @@ -276,8 +276,7 @@ static int nforce2_target(struct cpufreq_policy *policy, /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR PFX "Changing FSB to %d failed\n", - target_fsb); + pr_err("Changing FSB to %d failed\n", target_fsb); else pr_debug("Changed FSB successfully to %d\n", target_fsb); @@ -325,8 +324,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* FIX: Get FID from CPU */ if (!fid) { if (!cpu_khz) { - printk(KERN_WARNING PFX - "cpu_khz not set, can't calculate multiplier!\n"); + pr_warn("cpu_khz not set, can't calculate multiplier!\n"); return -ENODEV; } @@ -341,8 +339,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) } } - printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, - fid / 10, fid % 10); + pr_info("FSB currently at %i MHz, FID %d.%d\n", + fsb, fid / 10, fid % 10); /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); @@ -401,11 +399,9 @@ static int nforce2_detect_chipset(void) if (nforce2_dev == NULL) return -ENODEV; - printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", - nforce2_dev->revision); - printk(KERN_INFO PFX - "FSB changing is maybe unstable and can lead to " - "crashes and data loss.\n"); + pr_info("Detected nForce2 chipset revision %X\n", + nforce2_dev->revision); + pr_info("FSB changing is maybe unstable and can lead to crashes and data loss\n"); return 0; } @@ -423,7 +419,7 @@ static int __init nforce2_init(void) /* detect chipset */ if (nforce2_detect_chipset()) { - printk(KERN_INFO PFX "No nForce2 chipset.\n"); + pr_info("No nForce2 chipset\n"); return -ENODEV; } diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index c4acfc5273b3c..035513b012eeb 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -78,6 +78,11 @@ static int cpufreq_governor(struct cpufreq_policy *policy, unsigned int event); static unsigned int __cpufreq_get(struct cpufreq_policy *policy); static int cpufreq_start_governor(struct cpufreq_policy *policy); +static inline int cpufreq_exit_governor(struct cpufreq_policy *policy) +{ + return cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); +} + /** * Two notifier lists: the "policy" list is involved in the * validation process for a new CPU frequency policy; the @@ -429,6 +434,73 @@ void cpufreq_freq_transition_end(struct cpufreq_policy *policy, } EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end); +/* + * Fast frequency switching status count. Positive means "enabled", negative + * means "disabled" and 0 means "not decided yet". + */ +static int cpufreq_fast_switch_count; +static DEFINE_MUTEX(cpufreq_fast_switch_lock); + +static void cpufreq_list_transition_notifiers(void) +{ + struct notifier_block *nb; + + pr_info("Registered transition notifiers:\n"); + + mutex_lock(&cpufreq_transition_notifier_list.mutex); + + for (nb = cpufreq_transition_notifier_list.head; nb; nb = nb->next) + pr_info("%pF\n", nb->notifier_call); + + mutex_unlock(&cpufreq_transition_notifier_list.mutex); +} + +/** + * cpufreq_enable_fast_switch - Enable fast frequency switching for policy. + * @policy: cpufreq policy to enable fast frequency switching for. + * + * Try to enable fast frequency switching for @policy. + * + * The attempt will fail if there is at least one transition notifier registered + * at this point, as fast frequency switching is quite fundamentally at odds + * with transition notifiers. Thus if successful, it will make registration of + * transition notifiers fail going forward. + */ +void cpufreq_enable_fast_switch(struct cpufreq_policy *policy) +{ + lockdep_assert_held(&policy->rwsem); + + if (!policy->fast_switch_possible) + return; + + mutex_lock(&cpufreq_fast_switch_lock); + if (cpufreq_fast_switch_count >= 0) { + cpufreq_fast_switch_count++; + policy->fast_switch_enabled = true; + } else { + pr_warn("CPU%u: Fast frequency switching not enabled\n", + policy->cpu); + cpufreq_list_transition_notifiers(); + } + mutex_unlock(&cpufreq_fast_switch_lock); +} +EXPORT_SYMBOL_GPL(cpufreq_enable_fast_switch); + +/** + * cpufreq_disable_fast_switch - Disable fast frequency switching for policy. + * @policy: cpufreq policy to disable fast frequency switching for. + */ +void cpufreq_disable_fast_switch(struct cpufreq_policy *policy) +{ + mutex_lock(&cpufreq_fast_switch_lock); + if (policy->fast_switch_enabled) { + policy->fast_switch_enabled = false; + if (!WARN_ON(cpufreq_fast_switch_count <= 0)) + cpufreq_fast_switch_count--; + } + mutex_unlock(&cpufreq_fast_switch_lock); +} +EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch); /********************************************************************* * SYSFS INTERFACE * @@ -1248,26 +1320,24 @@ out_free_policy: */ static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) { + struct cpufreq_policy *policy; unsigned cpu = dev->id; - int ret; dev_dbg(dev, "%s: adding CPU%u\n", __func__, cpu); - if (cpu_online(cpu)) { - ret = cpufreq_online(cpu); - } else { - /* - * A hotplug notifier will follow and we will handle it as CPU - * online then. For now, just create the sysfs link, unless - * there is no policy or the link is already present. - */ - struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); + if (cpu_online(cpu)) + return cpufreq_online(cpu); - ret = policy && !cpumask_test_and_set_cpu(cpu, policy->real_cpus) - ? add_cpu_dev_symlink(policy, cpu) : 0; - } + /* + * A hotplug notifier will follow and we will handle it as CPU online + * then. For now, just create the sysfs link, unless there is no policy + * or the link is already present. + */ + policy = per_cpu(cpufreq_cpu_data, cpu); + if (!policy || cpumask_test_and_set_cpu(cpu, policy->real_cpus)) + return 0; - return ret; + return add_cpu_dev_symlink(policy, cpu); } static void cpufreq_offline(unsigned int cpu) @@ -1319,7 +1389,7 @@ static void cpufreq_offline(unsigned int cpu) /* If cpu is last user of policy, free policy */ if (has_target()) { - ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); + ret = cpufreq_exit_governor(policy); if (ret) pr_err("%s: Failed to exit governor\n", __func__); } @@ -1447,8 +1517,12 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy) ret_freq = cpufreq_driver->get(policy->cpu); - /* Updating inactive policies is invalid, so avoid doing that. */ - if (unlikely(policy_is_inactive(policy))) + /* + * Updating inactive policies is invalid, so avoid doing that. Also + * if fast frequency switching is used with the given policy, the check + * against policy->cur is pointless, so skip it in that case too. + */ + if (unlikely(policy_is_inactive(policy)) || policy->fast_switch_enabled) return ret_freq; if (ret_freq && policy->cur && @@ -1679,8 +1753,18 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) switch (list) { case CPUFREQ_TRANSITION_NOTIFIER: + mutex_lock(&cpufreq_fast_switch_lock); + + if (cpufreq_fast_switch_count > 0) { + mutex_unlock(&cpufreq_fast_switch_lock); + return -EBUSY; + } ret = srcu_notifier_chain_register( &cpufreq_transition_notifier_list, nb); + if (!ret) + cpufreq_fast_switch_count--; + + mutex_unlock(&cpufreq_fast_switch_lock); break; case CPUFREQ_POLICY_NOTIFIER: ret = blocking_notifier_chain_register( @@ -1713,8 +1797,14 @@ int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list) switch (list) { case CPUFREQ_TRANSITION_NOTIFIER: + mutex_lock(&cpufreq_fast_switch_lock); + ret = srcu_notifier_chain_unregister( &cpufreq_transition_notifier_list, nb); + if (!ret && !WARN_ON(cpufreq_fast_switch_count >= 0)) + cpufreq_fast_switch_count++; + + mutex_unlock(&cpufreq_fast_switch_lock); break; case CPUFREQ_POLICY_NOTIFIER: ret = blocking_notifier_chain_unregister( @@ -1733,6 +1823,37 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier); * GOVERNORS * *********************************************************************/ +/** + * cpufreq_driver_fast_switch - Carry out a fast CPU frequency switch. + * @policy: cpufreq policy to switch the frequency for. + * @target_freq: New frequency to set (may be approximate). + * + * Carry out a fast frequency switch without sleeping. + * + * The driver's ->fast_switch() callback invoked by this function must be + * suitable for being called from within RCU-sched read-side critical sections + * and it is expected to select the minimum available frequency greater than or + * equal to @target_freq (CPUFREQ_RELATION_L). + * + * This function must not be called if policy->fast_switch_enabled is unset. + * + * Governors calling this function must guarantee that it will never be invoked + * twice in parallel for the same policy and that it will never be called in + * parallel with either ->target() or ->target_index() for the same policy. + * + * If CPUFREQ_ENTRY_INVALID is returned by the driver's ->fast_switch() + * callback to indicate an error condition, the hardware configuration must be + * preserved. + */ +unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + clamp_val(target_freq, policy->min, policy->max); + + return cpufreq_driver->fast_switch(policy, target_freq); +} +EXPORT_SYMBOL_GPL(cpufreq_driver_fast_switch); + /* Must set freqs->new to intermediate frequency */ static int __target_intermediate(struct cpufreq_policy *policy, struct cpufreq_freqs *freqs, int index) @@ -2108,7 +2229,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy, return ret; } - ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); + ret = cpufreq_exit_governor(policy); if (ret) { pr_err("%s: Failed to Exit Governor: %s (%d)\n", __func__, old_gov->name, ret); @@ -2125,7 +2246,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy, pr_debug("cpufreq: governor change\n"); return 0; } - cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); + cpufreq_exit_governor(policy); } /* new governor failed, so re-start old one */ @@ -2193,16 +2314,13 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb, switch (action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: + case CPU_DOWN_FAILED: cpufreq_online(cpu); break; case CPU_DOWN_PREPARE: cpufreq_offline(cpu); break; - - case CPU_DOWN_FAILED: - cpufreq_online(cpu); - break; } return NOTIFY_OK; } diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index bf4913f6453b1..316df247e00da 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -129,9 +129,10 @@ static struct notifier_block cs_cpufreq_notifier_block = { /************************** sysfs interface ************************/ static struct dbs_governor cs_dbs_gov; -static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, - const char *buf, size_t count) +static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); unsigned int input; int ret; ret = sscanf(buf, "%u", &input); @@ -143,9 +144,10 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, return count; } -static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_up_threshold(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; unsigned int input; int ret; @@ -158,9 +160,10 @@ static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf, return count; } -static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_down_threshold(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; unsigned int input; int ret; @@ -175,9 +178,10 @@ static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf, return count; } -static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, - const char *buf, size_t count) +static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); unsigned int input; int ret; @@ -199,9 +203,10 @@ static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, return count; } -static ssize_t store_freq_step(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_freq_step(struct gov_attr_set *attr_set, const char *buf, + size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; unsigned int input; int ret; diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 5f1147fa9239c..be498d56dd697 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -43,9 +43,10 @@ static DEFINE_MUTEX(gov_dbs_data_mutex); * This must be called with dbs_data->mutex held, otherwise traversing * policy_dbs_list isn't safe. */ -ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf, +ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); struct policy_dbs_info *policy_dbs; unsigned int rate; int ret; @@ -59,7 +60,7 @@ ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf, * We are operating under dbs_data->mutex and so the list and its * entries can't be freed concurrently. */ - list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) { + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { mutex_lock(&policy_dbs->timer_mutex); /* * On 32-bit architectures this may race with the @@ -96,13 +97,13 @@ void gov_update_cpu_data(struct dbs_data *dbs_data) { struct policy_dbs_info *policy_dbs; - list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) { + list_for_each_entry(policy_dbs, &dbs_data->attr_set.policy_list, list) { unsigned int j; for_each_cpu(j, policy_dbs->policy->cpus) { struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); - j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall, + j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, dbs_data->io_is_busy); if (dbs_data->ignore_nice_load) j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; @@ -111,54 +112,6 @@ void gov_update_cpu_data(struct dbs_data *dbs_data) } EXPORT_SYMBOL_GPL(gov_update_cpu_data); -static inline struct dbs_data *to_dbs_data(struct kobject *kobj) -{ - return container_of(kobj, struct dbs_data, kobj); -} - -static inline struct governor_attr *to_gov_attr(struct attribute *attr) -{ - return container_of(attr, struct governor_attr, attr); -} - -static ssize_t governor_show(struct kobject *kobj, struct attribute *attr, - char *buf) -{ - struct dbs_data *dbs_data = to_dbs_data(kobj); - struct governor_attr *gattr = to_gov_attr(attr); - - return gattr->show(dbs_data, buf); -} - -static ssize_t governor_store(struct kobject *kobj, struct attribute *attr, - const char *buf, size_t count) -{ - struct dbs_data *dbs_data = to_dbs_data(kobj); - struct governor_attr *gattr = to_gov_attr(attr); - int ret = -EBUSY; - - mutex_lock(&dbs_data->mutex); - - if (dbs_data->usage_count) - ret = gattr->store(dbs_data, buf, count); - - mutex_unlock(&dbs_data->mutex); - - return ret; -} - -/* - * Sysfs Ops for accessing governor attributes. - * - * All show/store invocations for governor specific sysfs attributes, will first - * call the below show/store callbacks and the attribute specific callback will - * be called from within it. - */ -static const struct sysfs_ops governor_sysfs_ops = { - .show = governor_show, - .store = governor_store, -}; - unsigned int dbs_update(struct cpufreq_policy *policy) { struct policy_dbs_info *policy_dbs = policy->governor_data; @@ -184,14 +137,14 @@ unsigned int dbs_update(struct cpufreq_policy *policy) /* Get Absolute Load */ for_each_cpu(j, policy->cpus) { struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); - u64 cur_wall_time, cur_idle_time; - unsigned int idle_time, wall_time; + u64 update_time, cur_idle_time; + unsigned int idle_time, time_elapsed; unsigned int load; - cur_idle_time = get_cpu_idle_time(j, &cur_wall_time, io_busy); + cur_idle_time = get_cpu_idle_time(j, &update_time, io_busy); - wall_time = cur_wall_time - j_cdbs->prev_cpu_wall; - j_cdbs->prev_cpu_wall = cur_wall_time; + time_elapsed = update_time - j_cdbs->prev_update_time; + j_cdbs->prev_update_time = update_time; idle_time = cur_idle_time - j_cdbs->prev_cpu_idle; j_cdbs->prev_cpu_idle = cur_idle_time; @@ -203,47 +156,62 @@ unsigned int dbs_update(struct cpufreq_policy *policy) j_cdbs->prev_cpu_nice = cur_nice; } - if (unlikely(!wall_time || wall_time < idle_time)) - continue; - - /* - * If the CPU had gone completely idle, and a task just woke up - * on this CPU now, it would be unfair to calculate 'load' the - * usual way for this elapsed time-window, because it will show - * near-zero load, irrespective of how CPU intensive that task - * actually is. This is undesirable for latency-sensitive bursty - * workloads. - * - * To avoid this, we reuse the 'load' from the previous - * time-window and give this task a chance to start with a - * reasonably high CPU frequency. (However, we shouldn't over-do - * this copy, lest we get stuck at a high load (high frequency) - * for too long, even when the current system load has actually - * dropped down. So we perform the copy only once, upon the - * first wake-up from idle.) - * - * Detecting this situation is easy: the governor's utilization - * update handler would not have run during CPU-idle periods. - * Hence, an unusually large 'wall_time' (as compared to the - * sampling rate) indicates this scenario. - * - * prev_load can be zero in two cases and we must recalculate it - * for both cases: - * - during long idle intervals - * - explicitly set to zero - */ - if (unlikely(wall_time > (2 * sampling_rate) && - j_cdbs->prev_load)) { + if (unlikely(!time_elapsed)) { + /* + * That can only happen when this function is called + * twice in a row with a very short interval between the + * calls, so the previous load value can be used then. + */ load = j_cdbs->prev_load; - + } else if (unlikely(time_elapsed > 2 * sampling_rate && + j_cdbs->prev_load)) { /* - * Perform a destructive copy, to ensure that we copy - * the previous load only once, upon the first wake-up - * from idle. + * If the CPU had gone completely idle and a task has + * just woken up on this CPU now, it would be unfair to + * calculate 'load' the usual way for this elapsed + * time-window, because it would show near-zero load, + * irrespective of how CPU intensive that task actually + * was. This is undesirable for latency-sensitive bursty + * workloads. + * + * To avoid this, reuse the 'load' from the previous + * time-window and give this task a chance to start with + * a reasonably high CPU frequency. However, that + * shouldn't be over-done, lest we get stuck at a high + * load (high frequency) for too long, even when the + * current system load has actually dropped down, so + * clear prev_load to guarantee that the load will be + * computed again next time. + * + * Detecting this situation is easy: the governor's + * utilization update handler would not have run during + * CPU-idle periods. Hence, an unusually large + * 'time_elapsed' (as compared to the sampling rate) + * indicates this scenario. */ + load = j_cdbs->prev_load; j_cdbs->prev_load = 0; } else { - load = 100 * (wall_time - idle_time) / wall_time; + if (time_elapsed >= idle_time) { + load = 100 * (time_elapsed - idle_time) / time_elapsed; + } else { + /* + * That can happen if idle_time is returned by + * get_cpu_idle_time_jiffy(). In that case + * idle_time is roughly equal to the difference + * between time_elapsed and "busy time" obtained + * from CPU statistics. Then, the "busy time" + * can end up being greater than time_elapsed + * (for example, if jiffies_64 and the CPU + * statistics are updated by different CPUs), + * so idle_time may in fact be negative. That + * means, though, that the CPU was busy all + * the time (on the rough average) during the + * last sampling interval and 100 can be + * returned as the load. + */ + load = (int)idle_time < 0 ? 100 : 0; + } j_cdbs->prev_load = load; } @@ -254,43 +222,6 @@ unsigned int dbs_update(struct cpufreq_policy *policy) } EXPORT_SYMBOL_GPL(dbs_update); -static void gov_set_update_util(struct policy_dbs_info *policy_dbs, - unsigned int delay_us) -{ - struct cpufreq_policy *policy = policy_dbs->policy; - int cpu; - - gov_update_sample_delay(policy_dbs, delay_us); - policy_dbs->last_sample_time = 0; - - for_each_cpu(cpu, policy->cpus) { - struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu); - - cpufreq_set_update_util_data(cpu, &cdbs->update_util); - } -} - -static inline void gov_clear_update_util(struct cpufreq_policy *policy) -{ - int i; - - for_each_cpu(i, policy->cpus) - cpufreq_set_update_util_data(i, NULL); - - synchronize_sched(); -} - -static void gov_cancel_work(struct cpufreq_policy *policy) -{ - struct policy_dbs_info *policy_dbs = policy->governor_data; - - gov_clear_update_util(policy_dbs->policy); - irq_work_sync(&policy_dbs->irq_work); - cancel_work_sync(&policy_dbs->work); - atomic_set(&policy_dbs->work_count, 0); - policy_dbs->work_in_progress = false; -} - static void dbs_work_handler(struct work_struct *work) { struct policy_dbs_info *policy_dbs; @@ -378,6 +309,44 @@ static void dbs_update_util_handler(struct update_util_data *data, u64 time, irq_work_queue(&policy_dbs->irq_work); } +static void gov_set_update_util(struct policy_dbs_info *policy_dbs, + unsigned int delay_us) +{ + struct cpufreq_policy *policy = policy_dbs->policy; + int cpu; + + gov_update_sample_delay(policy_dbs, delay_us); + policy_dbs->last_sample_time = 0; + + for_each_cpu(cpu, policy->cpus) { + struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu); + + cpufreq_add_update_util_hook(cpu, &cdbs->update_util, + dbs_update_util_handler); + } +} + +static inline void gov_clear_update_util(struct cpufreq_policy *policy) +{ + int i; + + for_each_cpu(i, policy->cpus) + cpufreq_remove_update_util_hook(i); + + synchronize_sched(); +} + +static void gov_cancel_work(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + + gov_clear_update_util(policy_dbs->policy); + irq_work_sync(&policy_dbs->irq_work); + cancel_work_sync(&policy_dbs->work); + atomic_set(&policy_dbs->work_count, 0); + policy_dbs->work_in_progress = false; +} + static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *policy, struct dbs_governor *gov) { @@ -400,7 +369,6 @@ static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *poli struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); j_cdbs->policy_dbs = policy_dbs; - j_cdbs->update_util.func = dbs_update_util_handler; } return policy_dbs; } @@ -449,10 +417,7 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy) policy_dbs->dbs_data = dbs_data; policy->governor_data = policy_dbs; - mutex_lock(&dbs_data->mutex); - dbs_data->usage_count++; - list_add(&policy_dbs->list, &dbs_data->policy_dbs_list); - mutex_unlock(&dbs_data->mutex); + gov_attr_set_get(&dbs_data->attr_set, &policy_dbs->list); goto out; } @@ -462,8 +427,7 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy) goto free_policy_dbs_info; } - INIT_LIST_HEAD(&dbs_data->policy_dbs_list); - mutex_init(&dbs_data->mutex); + gov_attr_set_init(&dbs_data->attr_set, &policy_dbs->list); ret = gov->init(dbs_data, !policy->governor->initialized); if (ret) @@ -483,14 +447,11 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy) if (!have_governor_per_policy()) gov->gdbs_data = dbs_data; - policy->governor_data = policy_dbs; - policy_dbs->dbs_data = dbs_data; - dbs_data->usage_count = 1; - list_add(&policy_dbs->list, &dbs_data->policy_dbs_list); + policy->governor_data = policy_dbs; gov->kobj_type.sysfs_ops = &governor_sysfs_ops; - ret = kobject_init_and_add(&dbs_data->kobj, &gov->kobj_type, + ret = kobject_init_and_add(&dbs_data->attr_set.kobj, &gov->kobj_type, get_governor_parent_kobj(policy), "%s", gov->gov.name); if (!ret) @@ -519,29 +480,21 @@ static int cpufreq_governor_exit(struct cpufreq_policy *policy) struct dbs_governor *gov = dbs_governor_of(policy); struct policy_dbs_info *policy_dbs = policy->governor_data; struct dbs_data *dbs_data = policy_dbs->dbs_data; - int count; + unsigned int count; /* Protect gov->gdbs_data against concurrent updates. */ mutex_lock(&gov_dbs_data_mutex); - mutex_lock(&dbs_data->mutex); - list_del(&policy_dbs->list); - count = --dbs_data->usage_count; - mutex_unlock(&dbs_data->mutex); + count = gov_attr_set_put(&dbs_data->attr_set, &policy_dbs->list); - if (!count) { - kobject_put(&dbs_data->kobj); - - policy->governor_data = NULL; + policy->governor_data = NULL; + if (!count) { if (!have_governor_per_policy()) gov->gdbs_data = NULL; gov->exit(dbs_data, policy->governor->initialized == 1); - mutex_destroy(&dbs_data->mutex); kfree(dbs_data); - } else { - policy->governor_data = NULL; } free_policy_dbs_info(policy_dbs, gov); @@ -570,12 +523,12 @@ static int cpufreq_governor_start(struct cpufreq_policy *policy) for_each_cpu(j, policy->cpus) { struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); - unsigned int prev_load; - j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall, io_busy); - - prev_load = j_cdbs->prev_cpu_wall - j_cdbs->prev_cpu_idle; - j_cdbs->prev_load = 100 * prev_load / (unsigned int)j_cdbs->prev_cpu_wall; + j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, io_busy); + /* + * Make the first invocation of dbs_update() compute the load. + */ + j_cdbs->prev_load = 0; if (ignore_nice) j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index 61ff82fe06132..34eb214b6d57a 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -24,20 +24,6 @@ #include <linux/module.h> #include <linux/mutex.h> -/* - * The polling frequency depends on the capability of the processor. Default - * polling frequency is 1000 times the transition latency of the processor. The - * governor will work on any processor with transition latency <= 10ms, using - * appropriate sampling rate. - * - * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL) - * this governor will not work. All times here are in us (micro seconds). - */ -#define MIN_SAMPLING_RATE_RATIO (2) -#define LATENCY_MULTIPLIER (1000) -#define MIN_LATENCY_MULTIPLIER (20) -#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000) - /* Ondemand Sampling types */ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE}; @@ -52,7 +38,7 @@ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE}; /* Governor demand based switching data (per-policy or global). */ struct dbs_data { - int usage_count; + struct gov_attr_set attr_set; void *tuners; unsigned int min_sampling_rate; unsigned int ignore_nice_load; @@ -60,37 +46,27 @@ struct dbs_data { unsigned int sampling_down_factor; unsigned int up_threshold; unsigned int io_is_busy; - - struct kobject kobj; - struct list_head policy_dbs_list; - /* - * Protect concurrent updates to governor tunables from sysfs, - * policy_dbs_list and usage_count. - */ - struct mutex mutex; }; -/* Governor's specific attributes */ -struct dbs_data; -struct governor_attr { - struct attribute attr; - ssize_t (*show)(struct dbs_data *dbs_data, char *buf); - ssize_t (*store)(struct dbs_data *dbs_data, const char *buf, - size_t count); -}; +static inline struct dbs_data *to_dbs_data(struct gov_attr_set *attr_set) +{ + return container_of(attr_set, struct dbs_data, attr_set); +} #define gov_show_one(_gov, file_name) \ static ssize_t show_##file_name \ -(struct dbs_data *dbs_data, char *buf) \ +(struct gov_attr_set *attr_set, char *buf) \ { \ + struct dbs_data *dbs_data = to_dbs_data(attr_set); \ struct _gov##_dbs_tuners *tuners = dbs_data->tuners; \ return sprintf(buf, "%u\n", tuners->file_name); \ } #define gov_show_one_common(file_name) \ static ssize_t show_##file_name \ -(struct dbs_data *dbs_data, char *buf) \ +(struct gov_attr_set *attr_set, char *buf) \ { \ + struct dbs_data *dbs_data = to_dbs_data(attr_set); \ return sprintf(buf, "%u\n", dbs_data->file_name); \ } @@ -135,7 +111,7 @@ static inline void gov_update_sample_delay(struct policy_dbs_info *policy_dbs, /* Per cpu structures */ struct cpu_dbs_info { u64 prev_cpu_idle; - u64 prev_cpu_wall; + u64 prev_update_time; u64 prev_cpu_nice; /* * Used to keep track of load in the previous interval. However, when @@ -184,7 +160,7 @@ void od_register_powersave_bias_handler(unsigned int (*f) (struct cpufreq_policy *, unsigned int, unsigned int), unsigned int powersave_bias); void od_unregister_powersave_bias_handler(void); -ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf, +ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf, size_t count); void gov_update_cpu_data(struct dbs_data *dbs_data); #endif /* _CPUFREQ_GOVERNOR_H */ diff --git a/drivers/cpufreq/cpufreq_governor_attr_set.c b/drivers/cpufreq/cpufreq_governor_attr_set.c new file mode 100644 index 0000000000000..52841f807a7eb --- /dev/null +++ b/drivers/cpufreq/cpufreq_governor_attr_set.c @@ -0,0 +1,84 @@ +/* + * Abstract code for CPUFreq governor tunable sysfs attributes. + * + * Copyright (C) 2016, Intel Corporation + * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "cpufreq_governor.h" + +static inline struct gov_attr_set *to_gov_attr_set(struct kobject *kobj) +{ + return container_of(kobj, struct gov_attr_set, kobj); +} + +static inline struct governor_attr *to_gov_attr(struct attribute *attr) +{ + return container_of(attr, struct governor_attr, attr); +} + +static ssize_t governor_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct governor_attr *gattr = to_gov_attr(attr); + + return gattr->show(to_gov_attr_set(kobj), buf); +} + +static ssize_t governor_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct gov_attr_set *attr_set = to_gov_attr_set(kobj); + struct governor_attr *gattr = to_gov_attr(attr); + int ret; + + mutex_lock(&attr_set->update_lock); + ret = attr_set->usage_count ? gattr->store(attr_set, buf, count) : -EBUSY; + mutex_unlock(&attr_set->update_lock); + return ret; +} + +const struct sysfs_ops governor_sysfs_ops = { + .show = governor_show, + .store = governor_store, +}; +EXPORT_SYMBOL_GPL(governor_sysfs_ops); + +void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node) +{ + INIT_LIST_HEAD(&attr_set->policy_list); + mutex_init(&attr_set->update_lock); + attr_set->usage_count = 1; + list_add(list_node, &attr_set->policy_list); +} +EXPORT_SYMBOL_GPL(gov_attr_set_init); + +void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node) +{ + mutex_lock(&attr_set->update_lock); + attr_set->usage_count++; + list_add(list_node, &attr_set->policy_list); + mutex_unlock(&attr_set->update_lock); +} +EXPORT_SYMBOL_GPL(gov_attr_set_get); + +unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node) +{ + unsigned int count; + + mutex_lock(&attr_set->update_lock); + list_del(list_node); + count = --attr_set->usage_count; + mutex_unlock(&attr_set->update_lock); + if (count) + return count; + + kobject_put(&attr_set->kobj); + mutex_destroy(&attr_set->update_lock); + return 0; +} +EXPORT_SYMBOL_GPL(gov_attr_set_put); diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index acd80272ded67..3001634305167 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -207,9 +207,10 @@ static unsigned int od_dbs_timer(struct cpufreq_policy *policy) /************************** sysfs interface ************************/ static struct dbs_governor od_dbs_gov; -static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_io_is_busy(struct gov_attr_set *attr_set, const char *buf, + size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); unsigned int input; int ret; @@ -224,9 +225,10 @@ static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf, return count; } -static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_up_threshold(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); unsigned int input; int ret; ret = sscanf(buf, "%u", &input); @@ -240,9 +242,10 @@ static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf, return count; } -static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, - const char *buf, size_t count) +static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); struct policy_dbs_info *policy_dbs; unsigned int input; int ret; @@ -254,7 +257,7 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, dbs_data->sampling_down_factor = input; /* Reset down sampling multiplier in case it was active */ - list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) { + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { /* * Doing this without locking might lead to using different * rate_mult values in od_update() and od_dbs_timer(). @@ -267,9 +270,10 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, return count; } -static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, - const char *buf, size_t count) +static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); unsigned int input; int ret; @@ -291,9 +295,10 @@ static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, return count; } -static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_powersave_bias(struct gov_attr_set *attr_set, + const char *buf, size_t count) { + struct dbs_data *dbs_data = to_dbs_data(attr_set); struct od_dbs_tuners *od_tuners = dbs_data->tuners; struct policy_dbs_info *policy_dbs; unsigned int input; @@ -308,7 +313,7 @@ static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf, od_tuners->powersave_bias = input; - list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) ondemand_powersave_bias_init(policy_dbs->policy); return count; diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index 4d16f45ee1daf..9f3dec9a3f36d 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/slab.h> static DEFINE_PER_CPU(unsigned int, cpu_is_managed); static DEFINE_MUTEX(userspace_mutex); @@ -31,6 +32,7 @@ static DEFINE_MUTEX(userspace_mutex); static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) { int ret = -EINVAL; + unsigned int *setspeed = policy->governor_data; pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq); @@ -38,6 +40,8 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) if (!per_cpu(cpu_is_managed, policy->cpu)) goto err; + *setspeed = freq; + ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L); err: mutex_unlock(&userspace_mutex); @@ -49,19 +53,45 @@ static ssize_t show_speed(struct cpufreq_policy *policy, char *buf) return sprintf(buf, "%u\n", policy->cur); } +static int cpufreq_userspace_policy_init(struct cpufreq_policy *policy) +{ + unsigned int *setspeed; + + setspeed = kzalloc(sizeof(*setspeed), GFP_KERNEL); + if (!setspeed) + return -ENOMEM; + + policy->governor_data = setspeed; + return 0; +} + static int cpufreq_governor_userspace(struct cpufreq_policy *policy, unsigned int event) { + unsigned int *setspeed = policy->governor_data; unsigned int cpu = policy->cpu; int rc = 0; + if (event == CPUFREQ_GOV_POLICY_INIT) + return cpufreq_userspace_policy_init(policy); + + if (!setspeed) + return -EINVAL; + switch (event) { + case CPUFREQ_GOV_POLICY_EXIT: + mutex_lock(&userspace_mutex); + policy->governor_data = NULL; + kfree(setspeed); + mutex_unlock(&userspace_mutex); + break; case CPUFREQ_GOV_START: BUG_ON(!policy->cur); pr_debug("started managing cpu %u\n", cpu); mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 1; + *setspeed = policy->cur; mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_STOP: @@ -69,20 +99,23 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 0; + *setspeed = 0; mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_LIMITS: mutex_lock(&userspace_mutex); - pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n", - cpu, policy->min, policy->max, - policy->cur); + pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n", + cpu, policy->min, policy->max, policy->cur, *setspeed); - if (policy->max < policy->cur) + if (policy->max < *setspeed) __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); - else if (policy->min > policy->cur) + else if (policy->min > *setspeed) __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); + else + __cpufreq_driver_target(policy, *setspeed, + CPUFREQ_RELATION_L); mutex_unlock(&userspace_mutex); break; } diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 4085244c8a670..cdf097b298623 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -6,6 +6,8 @@ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -20,7 +22,7 @@ #include <asm/msr.h> #include <asm/tsc.h> -#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) #include <linux/acpi.h> #include <acpi/processor.h> #endif @@ -33,7 +35,7 @@ struct eps_cpu_data { u32 fsb; -#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) u32 bios_limit; #endif struct cpufreq_frequency_table freq_table[]; @@ -46,7 +48,7 @@ static int freq_failsafe_off; static int voltage_failsafe_off; static int set_max_voltage; -#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) static int ignore_acpi_limit; static struct acpi_processor_performance *eps_acpi_cpu_perf; @@ -141,11 +143,9 @@ static int eps_set_state(struct eps_cpu_data *centaur, /* Print voltage and multiplier */ rdmsr(MSR_IA32_PERF_STATUS, lo, hi); current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); + pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700); current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", - current_multiplier); + pr_info("Current multiplier = %d\n", current_multiplier); } #endif return 0; @@ -166,7 +166,7 @@ static int eps_target(struct cpufreq_policy *policy, unsigned int index) dest_state = centaur->freq_table[index].driver_data & 0xffff; ret = eps_set_state(centaur, policy, dest_state); if (ret) - printk(KERN_ERR "eps: Timeout!\n"); + pr_err("Timeout!\n"); return ret; } @@ -186,7 +186,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) int k, step, voltage; int ret; int states; -#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) unsigned int limit; #endif @@ -194,36 +194,36 @@ static int eps_cpu_init(struct cpufreq_policy *policy) return -ENODEV; /* Check brand */ - printk(KERN_INFO "eps: Detected VIA "); + pr_info("Detected VIA "); switch (c->x86_model) { case 10: rdmsr(0x1153, lo, hi); brand = (((lo >> 2) ^ lo) >> 18) & 3; - printk(KERN_CONT "Model A "); + pr_cont("Model A "); break; case 13: rdmsr(0x1154, lo, hi); brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff; - printk(KERN_CONT "Model D "); + pr_cont("Model D "); break; } switch (brand) { case EPS_BRAND_C7M: - printk(KERN_CONT "C7-M\n"); + pr_cont("C7-M\n"); break; case EPS_BRAND_C7: - printk(KERN_CONT "C7\n"); + pr_cont("C7\n"); break; case EPS_BRAND_EDEN: - printk(KERN_CONT "Eden\n"); + pr_cont("Eden\n"); break; case EPS_BRAND_C7D: - printk(KERN_CONT "C7-D\n"); + pr_cont("C7-D\n"); break; case EPS_BRAND_C3: - printk(KERN_CONT "C3\n"); + pr_cont("C3\n"); return -ENODEV; break; } @@ -235,7 +235,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Can be locked at 0 */ rdmsrl(MSR_IA32_MISC_ENABLE, val); if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n"); + pr_info("Can't enable Enhanced PowerSaver\n"); return -ENODEV; } } @@ -243,22 +243,19 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Print voltage and multiplier */ rdmsr(MSR_IA32_PERF_STATUS, lo, hi); current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); + pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700); current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); + pr_info("Current multiplier = %d\n", current_multiplier); /* Print limits */ max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", - max_voltage * 16 + 700); + pr_info("Highest voltage = %dmV\n", max_voltage * 16 + 700); max_multiplier = (hi >> 8) & 0xff; - printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); + pr_info("Highest multiplier = %d\n", max_multiplier); min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", - min_voltage * 16 + 700); + pr_info("Lowest voltage = %dmV\n", min_voltage * 16 + 700); min_multiplier = (hi >> 24) & 0xff; - printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); + pr_info("Lowest multiplier = %d\n", min_multiplier); /* Sanity checks */ if (current_multiplier == 0 || max_multiplier == 0 @@ -276,34 +273,30 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Check for systems using underclocked CPU */ if (!freq_failsafe_off && max_multiplier != current_multiplier) { - printk(KERN_INFO "eps: Your processor is running at different " - "frequency then its maximum. Aborting.\n"); - printk(KERN_INFO "eps: You can use freq_failsafe_off option " - "to disable this check.\n"); + pr_info("Your processor is running at different frequency then its maximum. Aborting.\n"); + pr_info("You can use freq_failsafe_off option to disable this check.\n"); return -EINVAL; } if (!voltage_failsafe_off && max_voltage != current_voltage) { - printk(KERN_INFO "eps: Your processor is running at different " - "voltage then its maximum. Aborting.\n"); - printk(KERN_INFO "eps: You can use voltage_failsafe_off " - "option to disable this check.\n"); + pr_info("Your processor is running at different voltage then its maximum. Aborting.\n"); + pr_info("You can use voltage_failsafe_off option to disable this check.\n"); return -EINVAL; } /* Calc FSB speed */ fsb = cpu_khz / current_multiplier; -#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) /* Check for ACPI processor speed limit */ if (!ignore_acpi_limit && !eps_acpi_init()) { if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) { - printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n", + pr_info("ACPI limit %u.%uGHz\n", limit/1000000, (limit%1000000)/10000); eps_acpi_exit(policy); /* Check if max_multiplier is in BIOS limits */ if (limit && max_multiplier * fsb > limit) { - printk(KERN_INFO "eps: Aborting.\n"); + pr_info("Aborting\n"); return -EINVAL; } } @@ -319,8 +312,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) v = (set_max_voltage - 700) / 16; /* Check if voltage is within limits */ if (v >= min_voltage && v <= max_voltage) { - printk(KERN_INFO "eps: Setting %dmV as maximum.\n", - v * 16 + 700); + pr_info("Setting %dmV as maximum\n", v * 16 + 700); max_voltage = v; } } @@ -341,7 +333,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Copy basic values */ centaur->fsb = fsb; -#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) centaur->bios_limit = limit; #endif @@ -426,7 +418,7 @@ module_param(freq_failsafe_off, int, 0644); MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check"); module_param(voltage_failsafe_off, int, 0644); MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check"); -#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) module_param(ignore_acpi_limit, int, 0644); MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit"); #endif diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c index 1c06e786c9baa..bfce11cba1df8 100644 --- a/drivers/cpufreq/elanfreq.c +++ b/drivers/cpufreq/elanfreq.c @@ -16,6 +16,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -185,7 +187,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) static int __init elanfreq_setup(char *str) { max_freq = simple_strtoul(str, &str, 0); - printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); + pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); return 1; } __setup("elanfreq=", elanfreq_setup); diff --git a/drivers/cpufreq/hisi-acpu-cpufreq.c b/drivers/cpufreq/hisi-acpu-cpufreq.c deleted file mode 100644 index 026d5b2224de0..0000000000000 --- a/drivers/cpufreq/hisi-acpu-cpufreq.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Hisilicon Platforms Using ACPU CPUFreq Support - * - * Copyright (c) 2015 Hisilicon Limited. - * Copyright (c) 2015 Linaro Limited. - * - * Leo Yan <leo.yan@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/err.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> - -static int __init hisi_acpu_cpufreq_driver_init(void) -{ - struct platform_device *pdev; - - if (!of_machine_is_compatible("hisilicon,hi6220")) - return -ENODEV; - - pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); - return PTR_ERR_OR_ZERO(pdev); -} -module_init(hisi_acpu_cpufreq_driver_init); - -MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>"); -MODULE_DESCRIPTION("Hisilicon acpu cpufreq driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index 0202429f1c5bb..759612da4fdce 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -8,6 +8,8 @@ * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> @@ -118,8 +120,7 @@ processor_get_freq ( if (ret) { set_cpus_allowed_ptr(current, &saved_mask); - printk(KERN_WARNING "get performance failed with error %d\n", - ret); + pr_warn("get performance failed with error %d\n", ret); ret = 0; goto migrate_end; } @@ -177,7 +178,7 @@ processor_set_freq ( ret = processor_set_pstate(value); if (ret) { - printk(KERN_WARNING "Transition failed with error %d\n", ret); + pr_warn("Transition failed with error %d\n", ret); retval = -ENODEV; goto migrate_end; } @@ -291,8 +292,7 @@ acpi_cpufreq_cpu_init ( /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); - printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management " - "activated.\n", cpu); + pr_info("CPU%u - ACPI performance management activated\n", cpu); for (i = 0; i < data->acpi_data.state_count; i++) pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index b230ebaae66cb..b76a98dd9988b 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -10,6 +10,8 @@ * of the License. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/kernel_stat.h> #include <linux/module.h> @@ -39,10 +41,17 @@ #define ATOM_TURBO_RATIOS 0x66c #define ATOM_TURBO_VIDS 0x66d +#ifdef CONFIG_ACPI +#include <acpi/processor.h> +#endif + #define FRAC_BITS 8 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS) #define fp_toint(X) ((X) >> FRAC_BITS) +#define EXT_BITS 6 +#define EXT_FRAC_BITS (EXT_BITS + FRAC_BITS) + static inline int32_t mul_fp(int32_t x, int32_t y) { return ((int64_t)x * (int64_t)y) >> FRAC_BITS; @@ -64,12 +73,22 @@ static inline int ceiling_fp(int32_t x) return ret; } +static inline u64 mul_ext_fp(u64 x, u64 y) +{ + return (x * y) >> EXT_FRAC_BITS; +} + +static inline u64 div_ext_fp(u64 x, u64 y) +{ + return div64_u64(x << EXT_FRAC_BITS, y); +} + /** * struct sample - Store performance sample - * @core_pct_busy: Ratio of APERF/MPERF in percent, which is actual + * @core_avg_perf: Ratio of APERF/MPERF which is the actual average * performance during last sample period * @busy_scaled: Scaled busy value which is used to calculate next - * P state. This can be different than core_pct_busy + * P state. This can be different than core_avg_perf * to account for cpu idle period * @aperf: Difference of actual performance frequency clock count * read from APERF MSR between last and current sample @@ -84,7 +103,7 @@ static inline int ceiling_fp(int32_t x) * data for choosing next P State. */ struct sample { - int32_t core_pct_busy; + int32_t core_avg_perf; int32_t busy_scaled; u64 aperf; u64 mperf; @@ -162,6 +181,7 @@ struct _pid { * struct cpudata - Per CPU instance data storage * @cpu: CPU number for this instance data * @update_util: CPUFreq utility callback information + * @update_util_set: CPUFreq utility callback is set * @pstate: Stores P state limits for this CPU * @vid: Stores VID limits for this CPU * @pid: Stores PID parameters for this CPU @@ -172,6 +192,8 @@ struct _pid { * @prev_cummulative_iowait: IO Wait time difference from last and * current sample * @sample: Storage for storing last Sample data + * @acpi_perf_data: Stores ACPI perf information read from _PSS + * @valid_pss_table: Set to true for valid ACPI _PSS entries found * * This structure stores per CPU instance data for all CPUs. */ @@ -179,6 +201,7 @@ struct cpudata { int cpu; struct update_util_data update_util; + bool update_util_set; struct pstate_data pstate; struct vid_data vid; @@ -190,6 +213,10 @@ struct cpudata { u64 prev_tsc; u64 prev_cummulative_iowait; struct sample sample; +#ifdef CONFIG_ACPI + struct acpi_processor_performance acpi_perf_data; + bool valid_pss_table; +#endif }; static struct cpudata **all_cpu_data; @@ -258,6 +285,9 @@ static struct pstate_adjust_policy pid_params; static struct pstate_funcs pstate_funcs; static int hwp_active; +#ifdef CONFIG_ACPI +static bool acpi_ppc; +#endif /** * struct perf_limits - Store user and policy limits @@ -331,6 +361,124 @@ static struct perf_limits *limits = &performance_limits; static struct perf_limits *limits = &powersave_limits; #endif +#ifdef CONFIG_ACPI + +static bool intel_pstate_get_ppc_enable_status(void) +{ + if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER || + acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER) + return true; + + return acpi_ppc; +} + +/* + * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and + * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and + * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state + * ratio, out of it only high 8 bits are used. For example 0x1700 is setting + * target ratio 0x17. The _PSS control value stores in a format which can be + * directly written to PERF_CTL MSR. But in intel_pstate driver this shift + * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()). + * This function converts the _PSS control value to intel pstate driver format + * for comparison and assignment. + */ +static int convert_to_native_pstate_format(struct cpudata *cpu, int index) +{ + return cpu->acpi_perf_data.states[index].control >> 8; +} + +static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + int turbo_pss_ctl; + int ret; + int i; + + if (hwp_active) + return; + + if (!intel_pstate_get_ppc_enable_status()) + return; + + cpu = all_cpu_data[policy->cpu]; + + ret = acpi_processor_register_performance(&cpu->acpi_perf_data, + policy->cpu); + if (ret) + return; + + /* + * Check if the control value in _PSS is for PERF_CTL MSR, which should + * guarantee that the states returned by it map to the states in our + * list directly. + */ + if (cpu->acpi_perf_data.control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) + goto err; + + /* + * If there is only one entry _PSS, simply ignore _PSS and continue as + * usual without taking _PSS into account + */ + if (cpu->acpi_perf_data.state_count < 2) + goto err; + + pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu); + for (i = 0; i < cpu->acpi_perf_data.state_count; i++) { + pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n", + (i == cpu->acpi_perf_data.state ? '*' : ' '), i, + (u32) cpu->acpi_perf_data.states[i].core_frequency, + (u32) cpu->acpi_perf_data.states[i].power, + (u32) cpu->acpi_perf_data.states[i].control); + } + + /* + * The _PSS table doesn't contain whole turbo frequency range. + * This just contains +1 MHZ above the max non turbo frequency, + * with control value corresponding to max turbo ratio. But + * when cpufreq set policy is called, it will call with this + * max frequency, which will cause a reduced performance as + * this driver uses real max turbo frequency as the max + * frequency. So correct this frequency in _PSS table to + * correct max turbo frequency based on the turbo ratio. + * Also need to convert to MHz as _PSS freq is in MHz. + */ + turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0); + if (turbo_pss_ctl > cpu->pstate.max_pstate) + cpu->acpi_perf_data.states[0].core_frequency = + policy->cpuinfo.max_freq / 1000; + cpu->valid_pss_table = true; + pr_info("_PPC limits will be enforced\n"); + + return; + + err: + cpu->valid_pss_table = false; + acpi_processor_unregister_performance(policy->cpu); +} + +static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + + cpu = all_cpu_data[policy->cpu]; + if (!cpu->valid_pss_table) + return; + + acpi_processor_unregister_performance(policy->cpu); +} + +#else +static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) +{ +} + +static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) +{ +} +#endif + static inline void pid_reset(struct _pid *pid, int setpoint, int busy, int deadband, int integral) { pid->setpoint = int_tofp(setpoint); @@ -341,17 +489,17 @@ static inline void pid_reset(struct _pid *pid, int setpoint, int busy, static inline void pid_p_gain_set(struct _pid *pid, int percent) { - pid->p_gain = div_fp(int_tofp(percent), int_tofp(100)); + pid->p_gain = div_fp(percent, 100); } static inline void pid_i_gain_set(struct _pid *pid, int percent) { - pid->i_gain = div_fp(int_tofp(percent), int_tofp(100)); + pid->i_gain = div_fp(percent, 100); } static inline void pid_d_gain_set(struct _pid *pid, int percent) { - pid->d_gain = div_fp(int_tofp(percent), int_tofp(100)); + pid->d_gain = div_fp(percent, 100); } static signed int pid_calc(struct _pid *pid, int32_t busy) @@ -537,7 +685,7 @@ static ssize_t show_turbo_pct(struct kobject *kobj, total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1; - turbo_fp = div_fp(int_tofp(no_turbo), int_tofp(total)); + turbo_fp = div_fp(no_turbo, total); turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100))); return sprintf(buf, "%u\n", turbo_pct); } @@ -579,7 +727,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, update_turbo_state(); if (limits->turbo_disabled) { - pr_warn("intel_pstate: Turbo disabled by BIOS or unavailable on processor\n"); + pr_warn("Turbo disabled by BIOS or unavailable on processor\n"); return -EPERM; } @@ -608,8 +756,7 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b, limits->max_perf_pct); limits->max_perf_pct = max(limits->min_perf_pct, limits->max_perf_pct); - limits->max_perf = div_fp(int_tofp(limits->max_perf_pct), - int_tofp(100)); + limits->max_perf = div_fp(limits->max_perf_pct, 100); if (hwp_active) intel_pstate_hwp_set_online_cpus(); @@ -633,8 +780,7 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b, limits->min_perf_pct); limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct); - limits->min_perf = div_fp(int_tofp(limits->min_perf_pct), - int_tofp(100)); + limits->min_perf = div_fp(limits->min_perf_pct, 100); if (hwp_active) intel_pstate_hwp_set_online_cpus(); @@ -1019,15 +1165,11 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) intel_pstate_set_min_pstate(cpu); } -static inline void intel_pstate_calc_busy(struct cpudata *cpu) +static inline void intel_pstate_calc_avg_perf(struct cpudata *cpu) { struct sample *sample = &cpu->sample; - int64_t core_pct; - core_pct = int_tofp(sample->aperf) * int_tofp(100); - core_pct = div64_u64(core_pct, int_tofp(sample->mperf)); - - sample->core_pct_busy = (int32_t)core_pct; + sample->core_avg_perf = div_ext_fp(sample->aperf, sample->mperf); } static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time) @@ -1070,9 +1212,14 @@ static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time) static inline int32_t get_avg_frequency(struct cpudata *cpu) { - return fp_toint(mul_fp(cpu->sample.core_pct_busy, - int_tofp(cpu->pstate.max_pstate_physical * - cpu->pstate.scaling / 100))); + return mul_ext_fp(cpu->sample.core_avg_perf, + cpu->pstate.max_pstate_physical * cpu->pstate.scaling); +} + +static inline int32_t get_avg_pstate(struct cpudata *cpu) +{ + return mul_ext_fp(cpu->pstate.max_pstate_physical, + cpu->sample.core_avg_perf); } static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu) @@ -1107,49 +1254,43 @@ static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu) cpu_load = div64_u64(int_tofp(100) * mperf, sample->tsc); cpu->sample.busy_scaled = cpu_load; - return cpu->pstate.current_pstate - pid_calc(&cpu->pid, cpu_load); + return get_avg_pstate(cpu) - pid_calc(&cpu->pid, cpu_load); } static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) { - int32_t core_busy, max_pstate, current_pstate, sample_ratio; + int32_t perf_scaled, max_pstate, current_pstate, sample_ratio; u64 duration_ns; /* - * core_busy is the ratio of actual performance to max - * max_pstate is the max non turbo pstate available - * current_pstate was the pstate that was requested during - * the last sample period. - * - * We normalize core_busy, which was our actual percent - * performance to what we requested during the last sample - * period. The result will be a percentage of busy at a - * specified pstate. + * perf_scaled is the average performance during the last sampling + * period scaled by the ratio of the maximum P-state to the P-state + * requested last time (in percent). That measures the system's + * response to the previous P-state selection. */ - core_busy = cpu->sample.core_pct_busy; - max_pstate = int_tofp(cpu->pstate.max_pstate_physical); - current_pstate = int_tofp(cpu->pstate.current_pstate); - core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate)); + max_pstate = cpu->pstate.max_pstate_physical; + current_pstate = cpu->pstate.current_pstate; + perf_scaled = mul_ext_fp(cpu->sample.core_avg_perf, + div_fp(100 * max_pstate, current_pstate)); /* * Since our utilization update callback will not run unless we are * in C0, check if the actual elapsed time is significantly greater (3x) * than our sample interval. If it is, then we were idle for a long - * enough period of time to adjust our busyness. + * enough period of time to adjust our performance metric. */ duration_ns = cpu->sample.time - cpu->last_sample_time; if ((s64)duration_ns > pid_params.sample_rate_ns * 3) { - sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns), - int_tofp(duration_ns)); - core_busy = mul_fp(core_busy, sample_ratio); + sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns); + perf_scaled = mul_fp(perf_scaled, sample_ratio); } else { sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc); if (sample_ratio < int_tofp(1)) - core_busy = 0; + perf_scaled = 0; } - cpu->sample.busy_scaled = core_busy; - return cpu->pstate.current_pstate - pid_calc(&cpu->pid, core_busy); + cpu->sample.busy_scaled = perf_scaled; + return cpu->pstate.current_pstate - pid_calc(&cpu->pid, perf_scaled); } static inline void intel_pstate_update_pstate(struct cpudata *cpu, int pstate) @@ -1179,7 +1320,7 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) intel_pstate_update_pstate(cpu, target_pstate); sample = &cpu->sample; - trace_pstate_sample(fp_toint(sample->core_pct_busy), + trace_pstate_sample(mul_ext_fp(100, sample->core_avg_perf), fp_toint(sample->busy_scaled), from, cpu->pstate.current_pstate, @@ -1199,7 +1340,7 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time, bool sample_taken = intel_pstate_sample(cpu, time); if (sample_taken) { - intel_pstate_calc_busy(cpu); + intel_pstate_calc_avg_perf(cpu); if (!hwp_active) intel_pstate_adjust_busy_pstate(cpu); } @@ -1261,23 +1402,16 @@ static int intel_pstate_init_cpu(unsigned int cpunum) intel_pstate_busy_pid_reset(cpu); - cpu->update_util.func = intel_pstate_update_util; - - pr_debug("intel_pstate: controlling: cpu %d\n", cpunum); + pr_debug("controlling: cpu %d\n", cpunum); return 0; } static unsigned int intel_pstate_get(unsigned int cpu_num) { - struct sample *sample; - struct cpudata *cpu; + struct cpudata *cpu = all_cpu_data[cpu_num]; - cpu = all_cpu_data[cpu_num]; - if (!cpu) - return 0; - sample = &cpu->sample; - return get_avg_frequency(cpu); + return cpu ? get_avg_frequency(cpu) : 0; } static void intel_pstate_set_update_util_hook(unsigned int cpu_num) @@ -1286,12 +1420,20 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num) /* Prevent intel_pstate_update_util() from using stale data. */ cpu->sample.time = 0; - cpufreq_set_update_util_data(cpu_num, &cpu->update_util); + cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, + intel_pstate_update_util); + cpu->update_util_set = true; } static void intel_pstate_clear_update_util_hook(unsigned int cpu) { - cpufreq_set_update_util_data(cpu, NULL); + struct cpudata *cpu_data = all_cpu_data[cpu]; + + if (!cpu_data->update_util_set) + return; + + cpufreq_remove_update_util_hook(cpu); + cpu_data->update_util_set = false; synchronize_sched(); } @@ -1311,20 +1453,31 @@ static void intel_pstate_set_performance_limits(struct perf_limits *limits) static int intel_pstate_set_policy(struct cpufreq_policy *policy) { + struct cpudata *cpu; + if (!policy->cpuinfo.max_freq) return -ENODEV; intel_pstate_clear_update_util_hook(policy->cpu); + cpu = all_cpu_data[0]; + if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate) { + if (policy->max < policy->cpuinfo.max_freq && + policy->max > cpu->pstate.max_pstate * cpu->pstate.scaling) { + pr_debug("policy->max > max non turbo frequency\n"); + policy->max = policy->cpuinfo.max_freq; + } + } + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { limits = &performance_limits; if (policy->max >= policy->cpuinfo.max_freq) { - pr_debug("intel_pstate: set performance\n"); + pr_debug("set performance\n"); intel_pstate_set_performance_limits(limits); goto out; } } else { - pr_debug("intel_pstate: set powersave\n"); + pr_debug("set powersave\n"); limits = &powersave_limits; } @@ -1348,10 +1501,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) /* Make sure min_perf_pct <= max_perf_pct */ limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct); - limits->min_perf = div_fp(int_tofp(limits->min_perf_pct), - int_tofp(100)); - limits->max_perf = div_fp(int_tofp(limits->max_perf_pct), - int_tofp(100)); + limits->min_perf = div_fp(limits->min_perf_pct, 100); + limits->max_perf = div_fp(limits->max_perf_pct, 100); out: intel_pstate_set_update_util_hook(policy->cpu); @@ -1377,7 +1528,7 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy) int cpu_num = policy->cpu; struct cpudata *cpu = all_cpu_data[cpu_num]; - pr_debug("intel_pstate: CPU %d exiting\n", cpu_num); + pr_debug("CPU %d exiting\n", cpu_num); intel_pstate_clear_update_util_hook(cpu_num); @@ -1410,12 +1561,20 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling; policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + intel_pstate_init_acpi_perf_limits(policy); policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; cpumask_set_cpu(policy->cpu, policy->cpus); return 0; } +static int intel_pstate_cpu_exit(struct cpufreq_policy *policy) +{ + intel_pstate_exit_perf_limits(policy); + + return 0; +} + static struct cpufreq_driver intel_pstate_driver = { .flags = CPUFREQ_CONST_LOOPS, .verify = intel_pstate_verify_policy, @@ -1423,6 +1582,7 @@ static struct cpufreq_driver intel_pstate_driver = { .resume = intel_pstate_hwp_set_policy, .get = intel_pstate_get, .init = intel_pstate_cpu_init, + .exit = intel_pstate_cpu_exit, .stop_cpu = intel_pstate_stop_cpu, .name = "intel_pstate", }; @@ -1466,8 +1626,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs) } -#if IS_ENABLED(CONFIG_ACPI) -#include <acpi/processor.h> +#ifdef CONFIG_ACPI static bool intel_pstate_no_acpi_pss(void) { @@ -1623,7 +1782,7 @@ hwp_cpu_matched: if (intel_pstate_platform_pwr_mgmt_exists()) return -ENODEV; - pr_info("Intel P-state driver initializing.\n"); + pr_info("Intel P-state driver initializing\n"); all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus()); if (!all_cpu_data) @@ -1640,7 +1799,7 @@ hwp_cpu_matched: intel_pstate_sysfs_expose_params(); if (hwp_active) - pr_info("intel_pstate: HWP enabled\n"); + pr_info("HWP enabled\n"); return rc; out: @@ -1666,13 +1825,19 @@ static int __init intel_pstate_setup(char *str) if (!strcmp(str, "disable")) no_load = 1; if (!strcmp(str, "no_hwp")) { - pr_info("intel_pstate: HWP disabled\n"); + pr_info("HWP disabled\n"); no_hwp = 1; } if (!strcmp(str, "force")) force_load = 1; if (!strcmp(str, "hwp_only")) hwp_only = 1; + +#ifdef CONFIG_ACPI + if (!strcmp(str, "support_acpi_ppc")) + acpi_ppc = true; +#endif + return 0; } early_param("intel_pstate", intel_pstate_setup); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index 247bfa8eaddbf..c46a12df40dd8 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -21,6 +21,8 @@ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -40,8 +42,6 @@ #include "longhaul.h" -#define PFX "longhaul: " - #define TYPE_LONGHAUL_V1 1 #define TYPE_LONGHAUL_V2 2 #define TYPE_POWERSAVER 3 @@ -347,14 +347,13 @@ retry_loop: freqs.new = calc_speed(longhaul_get_cpu_mult()); /* Check if requested frequency is set. */ if (unlikely(freqs.new != speed)) { - printk(KERN_INFO PFX "Failed to set requested frequency!\n"); + pr_info("Failed to set requested frequency!\n"); /* Revision ID = 1 but processor is expecting revision key * equal to 0. Jumpers at the bottom of processor will change * multiplier and FSB, but will not change bits in Longhaul * MSR nor enable voltage scaling. */ if (!revid_errata) { - printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " - "option.\n"); + pr_info("Enabling \"Ignore Revision ID\" option\n"); revid_errata = 1; msleep(200); goto retry_loop; @@ -364,11 +363,10 @@ retry_loop: * but it doesn't change frequency. I tried poking various * bits in northbridge registers, but without success. */ if (longhaul_flags & USE_ACPI_C3) { - printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); + pr_info("Disabling ACPI C3 support\n"); longhaul_flags &= ~USE_ACPI_C3; if (revid_errata) { - printk(KERN_INFO PFX "Disabling \"Ignore " - "Revision ID\" option.\n"); + pr_info("Disabling \"Ignore Revision ID\" option\n"); revid_errata = 0; } msleep(200); @@ -379,7 +377,7 @@ retry_loop: * RevID = 1. RevID errata will make things right. Just * to be 100% sure. */ if (longhaul_version == TYPE_LONGHAUL_V2) { - printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); + pr_info("Switching to Longhaul ver. 1\n"); longhaul_version = TYPE_LONGHAUL_V1; msleep(200); goto retry_loop; @@ -387,8 +385,7 @@ retry_loop: } if (!bm_timeout) { - printk(KERN_INFO PFX "Warning: Timeout while waiting for " - "idle PCI bus.\n"); + pr_info("Warning: Timeout while waiting for idle PCI bus\n"); return -EBUSY; } @@ -433,12 +430,12 @@ static int longhaul_get_ranges(void) /* Get current frequency */ mult = longhaul_get_cpu_mult(); if (mult == -1) { - printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + pr_info("Invalid (reserved) multiplier!\n"); return -EINVAL; } fsb = guess_fsb(mult); if (fsb == 0) { - printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + pr_info("Invalid (reserved) FSB!\n"); return -EINVAL; } /* Get max multiplier - as we always did. @@ -468,11 +465,11 @@ static int longhaul_get_ranges(void) print_speed(highest_speed/1000)); if (lowest_speed == highest_speed) { - printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + pr_info("highestspeed == lowest, aborting\n"); return -EINVAL; } if (lowest_speed > highest_speed) { - printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + pr_info("nonsense! lowest (%d > %d) !\n", lowest_speed, highest_speed); return -EINVAL; } @@ -538,16 +535,16 @@ static void longhaul_setup_voltagescaling(void) rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!(longhaul.bits.RevisionID & 1)) { - printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); + pr_info("Voltage scaling not supported by CPU\n"); return; } if (!longhaul.bits.VRMRev) { - printk(KERN_INFO PFX "VRM 8.5\n"); + pr_info("VRM 8.5\n"); vrm_mV_table = &vrm85_mV[0]; mV_vrm_table = &mV_vrm85[0]; } else { - printk(KERN_INFO PFX "Mobile VRM\n"); + pr_info("Mobile VRM\n"); if (cpu_model < CPU_NEHEMIAH) return; vrm_mV_table = &mobilevrm_mV[0]; @@ -558,27 +555,21 @@ static void longhaul_setup_voltagescaling(void) maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " - "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, - maxvid.mV/1000, maxvid.mV%1000); + pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n", + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); return; } if (minvid.mV == maxvid.mV) { - printk(KERN_INFO PFX "Claims to support voltage scaling but " - "min & max are both %d.%03d. " - "Voltage scaling disabled\n", - maxvid.mV/1000, maxvid.mV%1000); + pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n", + maxvid.mV/1000, maxvid.mV%1000); return; } /* How many voltage steps*/ numvscales = maxvid.pos - minvid.pos + 1; - printk(KERN_INFO PFX - "Max VID=%d.%03d " - "Min VID=%d.%03d, " - "%d possible voltage scales\n", + pr_info("Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", maxvid.mV/1000, maxvid.mV%1000, minvid.mV/1000, minvid.mV%1000, numvscales); @@ -617,12 +608,12 @@ static void longhaul_setup_voltagescaling(void) pos = minvid.pos; freq_pos->driver_data |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", + pr_info("f: %d kHz, index: %d, vid: %d mV\n", speed, (int)(freq_pos - longhaul_table), vid.mV); } can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled.\n"); + pr_info("Voltage scaling enabled\n"); } @@ -720,8 +711,7 @@ static int enable_arbiter_disable(void) pci_write_config_byte(dev, reg, pci_cmd); pci_read_config_byte(dev, reg, &pci_cmd); if (!(pci_cmd & 1<<7)) { - printk(KERN_ERR PFX - "Can't enable access to port 0x22.\n"); + pr_err("Can't enable access to port 0x22\n"); status = 0; } } @@ -758,8 +748,7 @@ static int longhaul_setup_southbridge(void) if (pci_cmd & 1 << 7) { pci_read_config_dword(dev, 0x88, &acpi_regs_addr); acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", - acpi_regs_addr); + pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr); } pci_dev_put(dev); @@ -853,14 +842,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_version = TYPE_LONGHAUL_V1; } - printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + pr_info("VIA %s CPU detected. ", cpuname); switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); + pr_cont("Longhaul v%d supported\n", longhaul_version); break; case TYPE_POWERSAVER: - printk(KERN_CONT "Powersaver supported.\n"); + pr_cont("Powersaver supported\n"); break; }; @@ -889,15 +878,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) if (!(longhaul_flags & USE_ACPI_C3 || longhaul_flags & USE_NORTHBRIDGE) && ((pr == NULL) || !(pr->flags.bm_control))) { - printk(KERN_ERR PFX - "No ACPI support. Unsupported northbridge.\n"); + pr_err("No ACPI support: Unsupported northbridge\n"); return -ENODEV; } if (longhaul_flags & USE_NORTHBRIDGE) - printk(KERN_INFO PFX "Using northbridge support.\n"); + pr_info("Using northbridge support\n"); if (longhaul_flags & USE_ACPI_C3) - printk(KERN_INFO PFX "Using ACPI support.\n"); + pr_info("Using ACPI support\n"); ret = longhaul_get_ranges(); if (ret != 0) @@ -934,20 +922,18 @@ static int __init longhaul_init(void) return -ENODEV; if (!enable) { - printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n"); + pr_err("Option \"enable\" not set - Aborting\n"); return -ENODEV; } #ifdef CONFIG_SMP if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, " - "longhaul disabled.\n"); + pr_err("More than 1 CPU detected, longhaul disabled\n"); return -ENODEV; } #endif #ifdef CONFIG_X86_IO_APIC if (boot_cpu_has(X86_FEATURE_APIC)) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently " - "broken in this configuration.\n"); + pr_err("APIC detected. Longhaul is currently broken in this configuration.\n"); return -ENODEV; } #endif @@ -955,7 +941,7 @@ static int __init longhaul_init(void) case 6 ... 9: return cpufreq_register_driver(&longhaul_driver); case 10: - printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); + pr_err("Use acpi-cpufreq driver for VIA C7\n"); default: ; } diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index cd593c1f66dc8..6bbdac1065ff5 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -10,6 +10,9 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/cpufreq.h> #include <linux/module.h> #include <linux/err.h> @@ -76,7 +79,7 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) cpuclk = clk_get(NULL, "cpu_clk"); if (IS_ERR(cpuclk)) { - printk(KERN_ERR "cpufreq: couldn't get CPU clk\n"); + pr_err("couldn't get CPU clk\n"); return PTR_ERR(cpuclk); } @@ -163,7 +166,7 @@ static int __init cpufreq_init(void) if (ret) return ret; - pr_info("cpufreq: Loongson-2F CPU frequency driver.\n"); + pr_info("Loongson-2F CPU frequency driver\n"); cpufreq_register_notifier(&loongson2_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c index cc3408fc073f9..d9df89392b843 100644 --- a/drivers/cpufreq/maple-cpufreq.c +++ b/drivers/cpufreq/maple-cpufreq.c @@ -13,6 +13,8 @@ #undef DEBUG +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/errno.h> @@ -174,7 +176,7 @@ static int __init maple_cpufreq_init(void) /* Get first CPU node */ cpunode = of_cpu_device_node_get(0); if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); + pr_err("Can't find any CPU 0 node\n"); goto bail_noprops; } @@ -182,8 +184,7 @@ static int __init maple_cpufreq_init(void) /* we actually don't care on which CPU to access PVR */ pvr_hi = PVR_VER(mfspr(SPRN_PVR)); if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n", - pvr_hi); + pr_err("Unsupported CPU version (%x)\n", pvr_hi); goto bail_noprops; } @@ -222,8 +223,8 @@ static int __init maple_cpufreq_init(void) maple_pmode_cur = -1; maple_scom_switch_freq(maple_scom_query_freq()); - printk(KERN_INFO "Registering Maple CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + pr_info("Registering Maple CPU frequency driver\n"); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", maple_cpu_freqs[1].frequency/1000, maple_cpu_freqs[0].frequency/1000, maple_cpu_freqs[maple_pmode_cur].frequency/1000); diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c index 2058e6d292ce9..6f602c7a71bd8 100644 --- a/drivers/cpufreq/mt8173-cpufreq.c +++ b/drivers/cpufreq/mt8173-cpufreq.c @@ -59,11 +59,8 @@ static LIST_HEAD(dvfs_info_list); static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu) { struct mtk_cpu_dvfs_info *info; - struct list_head *list; - - list_for_each(list, &dvfs_info_list) { - info = list_entry(list, struct mtk_cpu_dvfs_info, list_head); + list_for_each_entry(info, &dvfs_info_list, list_head) { if (cpumask_test_cpu(cpu, &info->cpus)) return info; } @@ -524,8 +521,7 @@ static struct cpufreq_driver mt8173_cpufreq_driver = { static int mt8173_cpufreq_probe(struct platform_device *pdev) { - struct mtk_cpu_dvfs_info *info; - struct list_head *list, *tmp; + struct mtk_cpu_dvfs_info *info, *tmp; int cpu, ret; for_each_possible_cpu(cpu) { @@ -559,11 +555,9 @@ static int mt8173_cpufreq_probe(struct platform_device *pdev) return 0; release_dvfs_info_list: - list_for_each_safe(list, tmp, &dvfs_info_list) { - info = list_entry(list, struct mtk_cpu_dvfs_info, list_head); - + list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) { mtk_cpu_dvfs_info_release(info); - list_del(list); + list_del(&info->list_head); } return ret; diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c new file mode 100644 index 0000000000000..e920889b9ac29 --- /dev/null +++ b/drivers/cpufreq/mvebu-cpufreq.c @@ -0,0 +1,107 @@ +/* + * CPUFreq support for Armada 370/XP platforms. + * + * Copyright (C) 2012-2016 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory Clement <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "mvebu-pmsu: " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/resource.h> + +static int __init armada_xp_pmsu_cpufreq_init(void) +{ + struct device_node *np; + struct resource res; + int ret, cpu; + + if (!of_machine_is_compatible("marvell,armadaxp")) + return 0; + + /* + * In order to have proper cpufreq handling, we need to ensure + * that the Device Tree description of the CPU clock includes + * the definition of the PMU DFS registers. If not, we do not + * register the clock notifier and the cpufreq driver. This + * piece of code is only for compatibility with old Device + * Trees. + */ + np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock"); + if (!np) + return 0; + + ret = of_address_to_resource(np, 1, &res); + if (ret) { + pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n"); + of_node_put(np); + return 0; + } + + of_node_put(np); + + /* + * For each CPU, this loop registers the operating points + * supported (which are the nominal CPU frequency and half of + * it), and registers the clock notifier that will take care + * of doing the PMSU part of a frequency transition. + */ + for_each_possible_cpu(cpu) { + struct device *cpu_dev; + struct clk *clk; + int ret; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("Cannot get CPU %d\n", cpu); + continue; + } + + clk = clk_get(cpu_dev, 0); + if (IS_ERR(clk)) { + pr_err("Cannot get clock for CPU %d\n", cpu); + return PTR_ERR(clk); + } + + /* + * In case of a failure of dev_pm_opp_add(), we don't + * bother with cleaning up the registered OPP (there's + * no function to do so), and simply cancel the + * registration of the cpufreq device. + */ + ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0); + if (ret) { + clk_put(clk); + return ret; + } + + ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0); + if (ret) { + clk_put(clk); + return ret; + } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, + cpumask_of(cpu_dev->id)); + if (ret) + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); + } + + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + return 0; +} +device_initcall(armada_xp_pmsu_cpufreq_init); diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index e3866e0d5bf8e..cead9bec4843a 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -13,6 +13,9 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> @@ -163,13 +166,13 @@ static int omap_cpufreq_probe(struct platform_device *pdev) { mpu_dev = get_cpu_device(0); if (!mpu_dev) { - pr_warning("%s: unable to get the mpu device\n", __func__); + pr_warn("%s: unable to get the MPU device\n", __func__); return -EINVAL; } mpu_reg = regulator_get(mpu_dev, "vcc"); if (IS_ERR(mpu_reg)) { - pr_warning("%s: unable to get MPU regulator\n", __func__); + pr_warn("%s: unable to get MPU regulator\n", __func__); mpu_reg = NULL; } else { /* diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 5dd95dab580d1..fd77812313f3e 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -20,6 +20,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -35,8 +37,6 @@ #include "speedstep-lib.h" -#define PFX "p4-clockmod: " - /* * Duty Cycle (3bits), note DC_DISABLE is not specified in * intel docs i just use it to mean disable @@ -124,11 +124,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) { if (c->x86 == 0x06) { if (cpu_has(c, X86_FEATURE_EST)) - printk_once(KERN_WARNING PFX "Warning: EST-capable " - "CPU detected. The acpi-cpufreq module offers " - "voltage scaling in addition to frequency " - "scaling. You should use that instead of " - "p4-clockmod, if possible.\n"); + pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n"); switch (c->x86_model) { case 0x0E: /* Core */ case 0x0F: /* Core Duo */ @@ -152,11 +148,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { - printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " - "The speedstep-ich or acpi cpufreq modules offer " - "voltage scaling in addition of frequency scaling. " - "You should use either one instead of p4-clockmod, " - "if possible.\n"); + pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n"); return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); } @@ -265,8 +257,7 @@ static int __init cpufreq_p4_init(void) ret = cpufreq_register_driver(&p4clockmod_driver); if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " - "Modulation available\n"); + pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); return ret; } diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c index 1f49d97a70ea1..b7b576e53e926 100644 --- a/drivers/cpufreq/pmac32-cpufreq.c +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -13,6 +13,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/errno.h> @@ -481,13 +483,13 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) freqs = of_get_property(cpunode, "bus-frequencies", &lenp); lenp /= sizeof(u32); if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + pr_err("bus-frequencies incorrect or missing\n"); return 1; } ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", NULL); if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + pr_err("processor-to-bus-ratio*2 missing\n"); return 1; } @@ -550,7 +552,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode) if (volt_gpio_np) voltage_gpio = read_gpio(volt_gpio_np); if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + pr_err("missing cpu-vcore-select gpio\n"); return 1; } @@ -675,9 +677,9 @@ out: pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; ppc_proc_freq = cur_freq * 1000ul; - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); + pr_info("Registering PowerMac CPU frequency driver\n"); + pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); return cpufreq_register_driver(&pmac_cpufreq_driver); } diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c index 4ff86878727fc..267e0894c62d0 100644 --- a/drivers/cpufreq/pmac64-cpufreq.c +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -12,6 +12,8 @@ #undef DEBUG +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/errno.h> @@ -138,7 +140,7 @@ static void g5_vdnap_switch_volt(int speed_mode) usleep_range(1000, 1000); } if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + pr_warn("Timeout in clock slewing !\n"); } @@ -266,7 +268,7 @@ static int g5_pfunc_switch_freq(int speed_mode) rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); if (rc) - printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); + pr_warn("pfunc switch error %d\n", rc); /* It's an irq GPIO so we should be able to just block here, * I'll do that later after I've properly tested the IRQ code for @@ -282,7 +284,7 @@ static int g5_pfunc_switch_freq(int speed_mode) usleep_range(500, 500); } if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + pr_warn("Timeout in clock slewing !\n"); /* If frequency is going down, last ramp the voltage */ if (speed_mode > g5_pmode_cur) @@ -368,7 +370,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) } pvr_hi = (*valp) >> 16; if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); + pr_err("Unsupported CPU version\n"); goto bail_noprops; } @@ -403,8 +405,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) root = of_find_node_by_path("/"); if (root == NULL) { - printk(KERN_ERR "cpufreq: Can't find root of " - "device tree\n"); + pr_err("Can't find root of device tree\n"); goto bail_noprops; } pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); @@ -412,8 +413,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) pmf_find_function(root, "slewing-done"); if (pfunc_set_vdnap0 == NULL || pfunc_vdnap0_complete == NULL) { - printk(KERN_ERR "cpufreq: Can't find required " - "platform function\n"); + pr_err("Can't find required platform function\n"); goto bail_noprops; } @@ -453,10 +453,10 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) g5_pmode_cur = -1; g5_switch_freq(g5_query_freq()); - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", - freq_method, volt_method); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + pr_info("Registering G5 CPU frequency driver\n"); + pr_info("Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", g5_cpu_freqs[1].frequency/1000, g5_cpu_freqs[0].frequency/1000, g5_cpu_freqs[g5_pmode_cur].frequency/1000); @@ -493,7 +493,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) if (cpuid != NULL) eeprom = of_get_property(cpuid, "cpuid", NULL); if (eeprom == NULL) { - printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + pr_err("Can't find cpuid EEPROM !\n"); rc = -ENODEV; goto bail; } @@ -511,7 +511,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) break; } if (hwclock == NULL) { - printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + pr_err("Can't find i2c clock chip !\n"); rc = -ENODEV; goto bail; } @@ -539,7 +539,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Check we have minimum requirements */ if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { - printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + pr_err("Can't find platform functions !\n"); rc = -ENODEV; goto bail; } @@ -567,7 +567,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Get max frequency from device-tree */ valp = of_get_property(cpunode, "clock-frequency", NULL); if (!valp) { - printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + pr_err("Can't find CPU frequency !\n"); rc = -ENODEV; goto bail; } @@ -583,8 +583,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Check for machines with no useful settings */ if (il == ih) { - printk(KERN_WARNING "cpufreq: No low frequency mode available" - " on this model !\n"); + pr_warn("No low frequency mode available on this model !\n"); rc = -ENODEV; goto bail; } @@ -595,7 +594,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Sanity check */ if (min_freq >= max_freq || min_freq < 1000) { - printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + pr_err("Can't calculate low frequency !\n"); rc = -ENXIO; goto bail; } @@ -619,10 +618,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) g5_pmode_cur = -1; g5_switch_freq(g5_query_freq()); - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: i2c/pfunc, " - "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + pr_info("Registering G5 CPU frequency driver\n"); + pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n", + has_volt ? "i2c/pfunc" : "none"); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", g5_cpu_freqs[1].frequency/1000, g5_cpu_freqs[0].frequency/1000, g5_cpu_freqs[g5_pmode_cur].frequency/1000); @@ -654,7 +653,7 @@ static int __init g5_cpufreq_init(void) /* Get first CPU node */ cpunode = of_cpu_device_node_get(0); if (cpunode == NULL) { - pr_err("cpufreq: Can't find any CPU node\n"); + pr_err("Can't find any CPU node\n"); return -ENODEV; } diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index e6f24b281e3ed..dedd2568e8528 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -8,6 +8,8 @@ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -22,7 +24,6 @@ #define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long as it is unused */ -#define PFX "powernow-k6: " static unsigned int busfreq; /* FSB, in 10 kHz */ static unsigned int max_multiplier; @@ -141,7 +142,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy, { if (clock_ratio[best_i].driver_data > max_multiplier) { - printk(KERN_ERR PFX "invalid target frequency\n"); + pr_err("invalid target frequency\n"); return -EINVAL; } @@ -175,13 +176,14 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) max_multiplier = param_max_multiplier; goto have_max_multiplier; } - printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n"); + pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n"); return -EINVAL; } if (!max_multiplier) { - printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz); - printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n"); + pr_warn("unknown frequency %u, cannot determine current multiplier\n", + khz); + pr_warn("use module parameters max_multiplier and bus_frequency\n"); return -EOPNOTSUPP; } @@ -193,7 +195,7 @@ have_max_multiplier: busfreq = param_busfreq / 10; goto have_busfreq; } - printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); + pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); return -EINVAL; } @@ -275,7 +277,7 @@ static int __init powernow_k6_init(void) return -ENODEV; if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); + pr_info("PowerNow IOPORT region already used\n"); return -EIO; } diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index c1ae1999770af..9f013ed42977e 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -13,6 +13,8 @@ * - We disable half multipliers if ACPI is used on A0 stepping CPUs. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -35,9 +37,6 @@ #include "powernow-k7.h" -#define PFX "powernow: " - - struct psb_s { u8 signature[10]; u8 tableversion; @@ -127,14 +126,13 @@ static int check_powernow(void) maxei = cpuid_eax(0x80000000); if (maxei < 0x80000007) { /* Any powernow info ? */ #ifdef MODULE - printk(KERN_INFO PFX "No powernow capabilities detected\n"); + pr_info("No powernow capabilities detected\n"); #endif return 0; } if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk(KERN_INFO PFX "K7 660[A0] core detected, " - "enabling errata workarounds\n"); + pr_info("K7 660[A0] core detected, enabling errata workarounds\n"); have_a0 = 1; } @@ -144,22 +142,22 @@ static int check_powernow(void) if (!(edx & (1 << 1 | 1 << 2))) return 0; - printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); + pr_info("PowerNOW! Technology present. Can scale: "); if (edx & 1 << 1) { - printk("frequency"); + pr_cont("frequency"); can_scale_bus = 1; } if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk(" and "); + pr_cont(" and "); if (edx & 1 << 2) { - printk("voltage"); + pr_cont("voltage"); can_scale_vid = 1; } - printk(".\n"); + pr_cont("\n"); return 1; } @@ -427,16 +425,14 @@ err1: err05: kfree(acpi_processor_perf); err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used on " - "this platform\n"); + pr_warn("ACPI perflib can not be used on this platform\n"); acpi_processor_perf = NULL; return retval; } #else static int powernow_acpi_init(void) { - printk(KERN_INFO PFX "no support for ACPI processor found." - " Please recompile your kernel with ACPI processor\n"); + pr_info("no support for ACPI processor found - please recompile your kernel with ACPI processor\n"); return -EINVAL; } #endif @@ -468,8 +464,7 @@ static int powernow_decode_bios(int maxfid, int startvid) psb = (struct psb_s *) p; pr_debug("Table version: 0x%x\n", psb->tableversion); if (psb->tableversion != 0x12) { - printk(KERN_INFO PFX "Sorry, only v1.2 tables" - " supported right now\n"); + pr_info("Sorry, only v1.2 tables supported right now\n"); return -ENODEV; } @@ -481,10 +476,8 @@ static int powernow_decode_bios(int maxfid, int startvid) latency = psb->settlingtime; if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time " - "to %d microseconds. " - "Should be at least 100. " - "Correcting.\n", latency); + pr_info("BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n", + latency); latency = 100; } pr_debug("Settling Time: %d microseconds.\n", @@ -516,10 +509,9 @@ static int powernow_decode_bios(int maxfid, int startvid) p += 2; } } - printk(KERN_INFO PFX "No PST tables match this cpuid " - "(0x%x)\n", etuple); - printk(KERN_INFO PFX "This is indicative of a broken " - "BIOS.\n"); + pr_info("No PST tables match this cpuid (0x%x)\n", + etuple); + pr_info("This is indicative of a broken BIOS\n"); return -EINVAL; } @@ -552,7 +544,7 @@ static int fixup_sgtc(void) sgtc = 100 * m * latency; sgtc = sgtc / 3; if (sgtc > 0xfffff) { - printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); + pr_warn("SGTC too large %d\n", sgtc); sgtc = 0xfffff; } return sgtc; @@ -574,14 +566,10 @@ static unsigned int powernow_get(unsigned int cpu) static int acer_cpufreq_pst(const struct dmi_system_id *d) { - printk(KERN_WARNING PFX - "%s laptop with broken PST tables in BIOS detected.\n", + pr_warn("%s laptop with broken PST tables in BIOS detected\n", d->ident); - printk(KERN_WARNING PFX - "You need to downgrade to 3A21 (09/09/2002), or try a newer " - "BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING PFX - "cpufreq scaling has been disabled as a result of this.\n"); + pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); + pr_warn("cpufreq scaling has been disabled as a result of this\n"); return 0; } @@ -616,40 +604,38 @@ static int powernow_cpu_init(struct cpufreq_policy *policy) fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; if (!fsb) { - printk(KERN_WARNING PFX "can not determine bus frequency\n"); + pr_warn("can not determine bus frequency\n"); return -EINVAL; } pr_debug("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk(KERN_INFO PFX "PSB/PST known to be broken. " - "Trying ACPI instead\n"); + pr_info("PSB/PST known to be broken - trying ACPI instead\n"); result = powernow_acpi_init(); } else { result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); if (result) { - printk(KERN_INFO PFX "Trying ACPI perflib\n"); + pr_info("Trying ACPI perflib\n"); maximum_speed = 0; minimum_speed = -1; latency = 0; result = powernow_acpi_init(); if (result) { - printk(KERN_INFO PFX - "ACPI and legacy methods failed\n"); + pr_info("ACPI and legacy methods failed\n"); } } else { /* SGTC use the bus clock as timer */ latency = fixup_sgtc(); - printk(KERN_INFO PFX "SGTC: %d\n", latency); + pr_info("SGTC: %d\n", latency); } } if (result) return result; - printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", - minimum_speed/1000, maximum_speed/1000); + pr_info("Minimum speed %d MHz - Maximum speed %d MHz\n", + minimum_speed/1000, maximum_speed/1000); policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c index 39ac78c94be0f..54c45368e3f17 100644 --- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -36,12 +36,56 @@ #include <asm/reg.h> #include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */ #include <asm/opal.h> +#include <linux/timer.h> #define POWERNV_MAX_PSTATES 256 #define PMSR_PSAFE_ENABLE (1UL << 30) #define PMSR_SPR_EM_DISABLE (1UL << 31) #define PMSR_MAX(x) ((x >> 32) & 0xFF) +#define MAX_RAMP_DOWN_TIME 5120 +/* + * On an idle system we want the global pstate to ramp-down from max value to + * min over a span of ~5 secs. Also we want it to initially ramp-down slowly and + * then ramp-down rapidly later on. + * + * This gives a percentage rampdown for time elapsed in milliseconds. + * ramp_down_percentage = ((ms * ms) >> 18) + * ~= 3.8 * (sec * sec) + * + * At 0 ms ramp_down_percent = 0 + * At 5120 ms ramp_down_percent = 100 + */ +#define ramp_down_percent(time) ((time * time) >> 18) + +/* Interval after which the timer is queued to bring down global pstate */ +#define GPSTATE_TIMER_INTERVAL 2000 + +/** + * struct global_pstate_info - Per policy data structure to maintain history of + * global pstates + * @highest_lpstate: The local pstate from which we are ramping down + * @elapsed_time: Time in ms spent in ramping down from + * highest_lpstate + * @last_sampled_time: Time from boot in ms when global pstates were + * last set + * @last_lpstate,last_gpstate: Last set values for local and global pstates + * @timer: Is used for ramping down if cpu goes idle for + * a long time with global pstate held high + * @gpstate_lock: A spinlock to maintain synchronization between + * routines called by the timer handler and + * governer's target_index calls + */ +struct global_pstate_info { + int highest_lpstate; + unsigned int elapsed_time; + unsigned int last_sampled_time; + int last_lpstate; + int last_gpstate; + spinlock_t gpstate_lock; + struct timer_list timer; +}; + static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1]; static bool rebooting, throttled, occ_reset; @@ -94,6 +138,17 @@ static struct powernv_pstate_info { int nr_pstates; } powernv_pstate_info; +static inline void reset_gpstates(struct cpufreq_policy *policy) +{ + struct global_pstate_info *gpstates = policy->driver_data; + + gpstates->highest_lpstate = 0; + gpstates->elapsed_time = 0; + gpstates->last_sampled_time = 0; + gpstates->last_lpstate = 0; + gpstates->last_gpstate = 0; +} + /* * Initialize the freq table based on data obtained * from the firmware passed via device-tree @@ -285,6 +340,7 @@ static inline void set_pmspr(unsigned long sprn, unsigned long val) struct powernv_smp_call_data { unsigned int freq; int pstate_id; + int gpstate_id; }; /* @@ -343,19 +399,21 @@ static unsigned int powernv_cpufreq_get(unsigned int cpu) * (struct powernv_smp_call_data *) and the pstate_id which needs to be set * on this CPU should be present in freq_data->pstate_id. */ -static void set_pstate(void *freq_data) +static void set_pstate(void *data) { unsigned long val; - unsigned long pstate_ul = - ((struct powernv_smp_call_data *) freq_data)->pstate_id; + struct powernv_smp_call_data *freq_data = data; + unsigned long pstate_ul = freq_data->pstate_id; + unsigned long gpstate_ul = freq_data->gpstate_id; val = get_pmspr(SPRN_PMCR); val = val & 0x0000FFFFFFFFFFFFULL; pstate_ul = pstate_ul & 0xFF; + gpstate_ul = gpstate_ul & 0xFF; /* Set both global(bits 56..63) and local(bits 48..55) PStates */ - val = val | (pstate_ul << 56) | (pstate_ul << 48); + val = val | (gpstate_ul << 56) | (pstate_ul << 48); pr_debug("Setting cpu %d pmcr to %016lX\n", raw_smp_processor_id(), val); @@ -424,6 +482,111 @@ next: } } +/** + * calc_global_pstate - Calculate global pstate + * @elapsed_time: Elapsed time in milliseconds + * @local_pstate: New local pstate + * @highest_lpstate: pstate from which its ramping down + * + * Finds the appropriate global pstate based on the pstate from which its + * ramping down and the time elapsed in ramping down. It follows a quadratic + * equation which ensures that it reaches ramping down to pmin in 5sec. + */ +static inline int calc_global_pstate(unsigned int elapsed_time, + int highest_lpstate, int local_pstate) +{ + int pstate_diff; + + /* + * Using ramp_down_percent we get the percentage of rampdown + * that we are expecting to be dropping. Difference between + * highest_lpstate and powernv_pstate_info.min will give a absolute + * number of how many pstates we will drop eventually by the end of + * 5 seconds, then just scale it get the number pstates to be dropped. + */ + pstate_diff = ((int)ramp_down_percent(elapsed_time) * + (highest_lpstate - powernv_pstate_info.min)) / 100; + + /* Ensure that global pstate is >= to local pstate */ + if (highest_lpstate - pstate_diff < local_pstate) + return local_pstate; + else + return highest_lpstate - pstate_diff; +} + +static inline void queue_gpstate_timer(struct global_pstate_info *gpstates) +{ + unsigned int timer_interval; + + /* + * Setting up timer to fire after GPSTATE_TIMER_INTERVAL ms, But + * if it exceeds MAX_RAMP_DOWN_TIME ms for ramp down time. + * Set timer such that it fires exactly at MAX_RAMP_DOWN_TIME + * seconds of ramp down time. + */ + if ((gpstates->elapsed_time + GPSTATE_TIMER_INTERVAL) + > MAX_RAMP_DOWN_TIME) + timer_interval = MAX_RAMP_DOWN_TIME - gpstates->elapsed_time; + else + timer_interval = GPSTATE_TIMER_INTERVAL; + + mod_timer_pinned(&gpstates->timer, jiffies + + msecs_to_jiffies(timer_interval)); +} + +/** + * gpstate_timer_handler + * + * @data: pointer to cpufreq_policy on which timer was queued + * + * This handler brings down the global pstate closer to the local pstate + * according quadratic equation. Queues a new timer if it is still not equal + * to local pstate + */ +void gpstate_timer_handler(unsigned long data) +{ + struct cpufreq_policy *policy = (struct cpufreq_policy *)data; + struct global_pstate_info *gpstates = policy->driver_data; + int gpstate_id; + unsigned int time_diff = jiffies_to_msecs(jiffies) + - gpstates->last_sampled_time; + struct powernv_smp_call_data freq_data; + + if (!spin_trylock(&gpstates->gpstate_lock)) + return; + + gpstates->last_sampled_time += time_diff; + gpstates->elapsed_time += time_diff; + freq_data.pstate_id = gpstates->last_lpstate; + + if ((gpstates->last_gpstate == freq_data.pstate_id) || + (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME)) { + gpstate_id = freq_data.pstate_id; + reset_gpstates(policy); + gpstates->highest_lpstate = freq_data.pstate_id; + } else { + gpstate_id = calc_global_pstate(gpstates->elapsed_time, + gpstates->highest_lpstate, + freq_data.pstate_id); + } + + /* + * If local pstate is equal to global pstate, rampdown is over + * So timer is not required to be queued. + */ + if (gpstate_id != freq_data.pstate_id) + queue_gpstate_timer(gpstates); + + freq_data.gpstate_id = gpstate_id; + gpstates->last_gpstate = freq_data.gpstate_id; + gpstates->last_lpstate = freq_data.pstate_id; + + spin_unlock(&gpstates->gpstate_lock); + + /* Timer may get migrated to a different cpu on cpu hot unplug */ + smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1); +} + /* * powernv_cpufreq_target_index: Sets the frequency corresponding to * the cpufreq table entry indexed by new_index on the cpus in the @@ -433,6 +596,8 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy, unsigned int new_index) { struct powernv_smp_call_data freq_data; + unsigned int cur_msec, gpstate_id; + struct global_pstate_info *gpstates = policy->driver_data; if (unlikely(rebooting) && new_index != get_nominal_index()) return 0; @@ -440,28 +605,81 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy, if (!throttled) powernv_cpufreq_throttle_check(NULL); + cur_msec = jiffies_to_msecs(get_jiffies_64()); + + spin_lock(&gpstates->gpstate_lock); freq_data.pstate_id = powernv_freqs[new_index].driver_data; + if (!gpstates->last_sampled_time) { + gpstate_id = freq_data.pstate_id; + gpstates->highest_lpstate = freq_data.pstate_id; + goto gpstates_done; + } + + if (gpstates->last_gpstate > freq_data.pstate_id) { + gpstates->elapsed_time += cur_msec - + gpstates->last_sampled_time; + + /* + * If its has been ramping down for more than MAX_RAMP_DOWN_TIME + * we should be resetting all global pstate related data. Set it + * equal to local pstate to start fresh. + */ + if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) { + reset_gpstates(policy); + gpstates->highest_lpstate = freq_data.pstate_id; + gpstate_id = freq_data.pstate_id; + } else { + /* Elaspsed_time is less than 5 seconds, continue to rampdown */ + gpstate_id = calc_global_pstate(gpstates->elapsed_time, + gpstates->highest_lpstate, + freq_data.pstate_id); + } + } else { + reset_gpstates(policy); + gpstates->highest_lpstate = freq_data.pstate_id; + gpstate_id = freq_data.pstate_id; + } + + /* + * If local pstate is equal to global pstate, rampdown is over + * So timer is not required to be queued. + */ + if (gpstate_id != freq_data.pstate_id) + queue_gpstate_timer(gpstates); + else + del_timer_sync(&gpstates->timer); + +gpstates_done: + freq_data.gpstate_id = gpstate_id; + gpstates->last_sampled_time = cur_msec; + gpstates->last_gpstate = freq_data.gpstate_id; + gpstates->last_lpstate = freq_data.pstate_id; + + spin_unlock(&gpstates->gpstate_lock); + /* * Use smp_call_function to send IPI and execute the * mtspr on target CPU. We could do that without IPI * if current CPU is within policy->cpus (core) */ smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1); - return 0; } static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy) { - int base, i; + int base, i, ret; + struct kernfs_node *kn; + struct global_pstate_info *gpstates; base = cpu_first_thread_sibling(policy->cpu); for (i = 0; i < threads_per_core; i++) cpumask_set_cpu(base + i, policy->cpus); - if (!policy->driver_data) { + kn = kernfs_find_and_get(policy->kobj.sd, throttle_attr_grp.name); + if (!kn) { int ret; ret = sysfs_create_group(&policy->kobj, &throttle_attr_grp); @@ -470,13 +688,37 @@ static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->cpu); return ret; } - /* - * policy->driver_data is used as a flag for one-time - * creation of throttle sysfs files. - */ - policy->driver_data = policy; + } else { + kernfs_put(kn); } - return cpufreq_table_validate_and_show(policy, powernv_freqs); + + gpstates = kzalloc(sizeof(*gpstates), GFP_KERNEL); + if (!gpstates) + return -ENOMEM; + + policy->driver_data = gpstates; + + /* initialize timer */ + init_timer_deferrable(&gpstates->timer); + gpstates->timer.data = (unsigned long)policy; + gpstates->timer.function = gpstate_timer_handler; + gpstates->timer.expires = jiffies + + msecs_to_jiffies(GPSTATE_TIMER_INTERVAL); + spin_lock_init(&gpstates->gpstate_lock); + ret = cpufreq_table_validate_and_show(policy, powernv_freqs); + + if (ret < 0) + kfree(policy->driver_data); + + return ret; +} + +static int powernv_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + /* timer is deleted in cpufreq_cpu_stop() */ + kfree(policy->driver_data); + + return 0; } static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb, @@ -604,15 +846,19 @@ static struct notifier_block powernv_cpufreq_opal_nb = { static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy) { struct powernv_smp_call_data freq_data; + struct global_pstate_info *gpstates = policy->driver_data; freq_data.pstate_id = powernv_pstate_info.min; + freq_data.gpstate_id = powernv_pstate_info.min; smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1); + del_timer_sync(&gpstates->timer); } static struct cpufreq_driver powernv_cpufreq_driver = { .name = "powernv-cpufreq", .flags = CPUFREQ_CONST_LOOPS, .init = powernv_cpufreq_cpu_init, + .exit = powernv_cpufreq_cpu_exit, .verify = cpufreq_generic_frequency_table_verify, .target_index = powernv_cpufreq_target_index, .get = powernv_cpufreq_get, diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h index b4c00a5a6a597..3eace725ccd6c 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq.h +++ b/drivers/cpufreq/ppc_cbe_cpufreq.h @@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu); int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode); -#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE) +#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI) extern bool cbe_cpufreq_has_pmi; #else #define cbe_cpufreq_has_pmi (0) diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c index 7969f7690498b..7c4cd5c634f23 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c +++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c @@ -23,7 +23,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/timer.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/of_platform.h> #include <asm/processor.h> @@ -142,15 +142,4 @@ static int __init cbe_cpufreq_pmi_init(void) return 0; } - -static void __exit cbe_cpufreq_pmi_exit(void) -{ - cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); - pmi_unregister_handler(&cbe_pmi_handler); -} - -module_init(cbe_cpufreq_pmi_init); -module_exit(cbe_cpufreq_pmi_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); +device_initcall(cbe_cpufreq_pmi_init); diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 46fee1539cc87..ce345bf34d5dd 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -29,6 +29,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/sched.h> @@ -186,8 +188,7 @@ static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq) ret = regulator_set_voltage(vcc_core, vmin, vmax); if (ret) - pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n", - vmin, vmax); + pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax); return ret; } @@ -195,10 +196,10 @@ static void __init pxa_cpufreq_init_voltages(void) { vcc_core = regulator_get(NULL, "vcc_core"); if (IS_ERR(vcc_core)) { - pr_info("cpufreq: Didn't find vcc_core regulator\n"); + pr_info("Didn't find vcc_core regulator\n"); vcc_core = NULL; } else { - pr_info("cpufreq: Found vcc_core regulator\n"); + pr_info("Found vcc_core regulator\n"); } } #else @@ -233,9 +234,8 @@ static void pxa27x_guess_max_freq(void) { if (!pxa27x_maxfreq) { pxa27x_maxfreq = 416000; - printk(KERN_INFO "PXA CPU 27x max frequency not defined " - "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", - pxa27x_maxfreq); + pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", + pxa27x_maxfreq); } else { pxa27x_maxfreq *= 1000; } @@ -408,7 +408,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) */ if (cpu_is_pxa25x()) { find_freq_tables(&pxa255_freq_table, &pxa255_freqs); - pr_info("PXA255 cpufreq using %s frequency table\n", + pr_info("using %s frequency table\n", pxa255_turbo_table ? "turbo" : "run"); cpufreq_table_validate_and_show(policy, pxa255_freq_table); @@ -417,7 +417,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) cpufreq_table_validate_and_show(policy, pxa27x_freq_table); } - printk(KERN_INFO "PXA CPU frequency change support initialized\n"); + pr_info("frequency change support initialized\n"); return 0; } diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c index b23e525a7af3f..53d8c3fb16f67 100644 --- a/drivers/cpufreq/qoriq-cpufreq.c +++ b/drivers/cpufreq/qoriq-cpufreq.c @@ -301,10 +301,11 @@ err_np: return -ENODEV; } -static int __exit qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy) +static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy) { struct cpu_data *data = policy->driver_data; + cpufreq_cooling_unregister(data->cdev); kfree(data->pclk); kfree(data->table); kfree(data); @@ -333,8 +334,8 @@ static void qoriq_cpufreq_ready(struct cpufreq_policy *policy) cpud->cdev = of_cpufreq_cooling_register(np, policy->related_cpus); - if (IS_ERR(cpud->cdev)) { - pr_err("Failed to register cooling device cpu%d: %ld\n", + if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) { + pr_err("cpu%d is not running as cooling device: %ld\n", policy->cpu, PTR_ERR(cpud->cdev)); cpud->cdev = NULL; @@ -348,7 +349,7 @@ static struct cpufreq_driver qoriq_cpufreq_driver = { .name = "qoriq_cpufreq", .flags = CPUFREQ_CONST_LOOPS, .init = qoriq_cpufreq_cpu_init, - .exit = __exit_p(qoriq_cpufreq_cpu_exit), + .exit = qoriq_cpufreq_cpu_exit, .verify = cpufreq_generic_frequency_table_verify, .target_index = qoriq_cpufreq_target, .get = cpufreq_generic_get, diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c index eb262133fef25..b04b6f02bbdcc 100644 --- a/drivers/cpufreq/s3c2412-cpufreq.c +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -10,6 +10,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -197,21 +199,20 @@ static int s3c2412_cpufreq_add(struct device *dev, hclk = clk_get(NULL, "hclk"); if (IS_ERR(hclk)) { - printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); + pr_err("cannot find hclk clock\n"); return -ENOENT; } fclk = clk_get(NULL, "fclk"); if (IS_ERR(fclk)) { - printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); + pr_err("cannot find fclk clock\n"); goto err_fclk; } fclk_rate = clk_get_rate(fclk); if (fclk_rate > 200000000) { - printk(KERN_INFO - "%s: fclk %ld MHz, assuming 266MHz capable part\n", - __func__, fclk_rate / 1000000); + pr_info("fclk %ld MHz, assuming 266MHz capable part\n", + fclk_rate / 1000000); s3c2412_cpufreq_info.max.fclk = 266000000; s3c2412_cpufreq_info.max.hclk = 133000000; s3c2412_cpufreq_info.max.pclk = 66000000; @@ -219,13 +220,13 @@ static int s3c2412_cpufreq_add(struct device *dev, armclk = clk_get(NULL, "armclk"); if (IS_ERR(armclk)) { - printk(KERN_ERR "%s: cannot find arm clock\n", __func__); + pr_err("cannot find arm clock\n"); goto err_armclk; } xtal = clk_get(NULL, "xtal"); if (IS_ERR(xtal)) { - printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); + pr_err("cannot find xtal clock\n"); goto err_xtal; } diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c index 0129f5c70a610..d0d75b65ddd6d 100644 --- a/drivers/cpufreq/s3c2440-cpufreq.c +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -11,6 +11,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -66,7 +68,7 @@ static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) __func__, fclk, armclk, hclk_max); if (armclk > fclk) { - printk(KERN_WARNING "%s: armclk > fclk\n", __func__); + pr_warn("%s: armclk > fclk\n", __func__); armclk = fclk; } @@ -273,7 +275,7 @@ static int s3c2440_cpufreq_add(struct device *dev, armclk = s3c_cpufreq_clk_get(NULL, "armclk"); if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { - printk(KERN_ERR "%s: failed to get clocks\n", __func__); + pr_err("%s: failed to get clocks\n", __func__); return -ENOENT; } diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c index 9b7b4289d66cb..4d976e8dbb2f4 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c +++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -10,6 +10,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/export.h> #include <linux/interrupt.h> @@ -178,7 +180,7 @@ static int __init s3c_freq_debugfs_init(void) { dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); if (IS_ERR(dbgfs_root)) { - printk(KERN_ERR "%s: error creating debugfs root\n", __func__); + pr_err("%s: error creating debugfs root\n", __func__); return PTR_ERR(dbgfs_root); } diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 68ef8fd9482fd..ae8eaed77b707 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -10,6 +10,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -175,7 +177,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, cpu_new.freq.fclk = cpu_new.pll.frequency; if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { - printk(KERN_ERR "no divisors for %d\n", target_freq); + pr_err("no divisors for %d\n", target_freq); goto err_notpossible; } @@ -187,7 +189,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { if (s3c_cpufreq_calcio(&cpu_new) < 0) { - printk(KERN_ERR "%s: no IO timings\n", __func__); + pr_err("%s: no IO timings\n", __func__); goto err_notpossible; } } @@ -262,7 +264,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, return 0; err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); + pr_err("no compatible settings for %d\n", target_freq); return -EINVAL; } @@ -331,7 +333,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy, &index); if (ret < 0) { - printk(KERN_ERR "%s: no PLL available\n", __func__); + pr_err("%s: no PLL available\n", __func__); goto err_notpossible; } @@ -346,7 +348,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy, return s3c_cpufreq_settarget(policy, target_freq, pll); err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); + pr_err("no compatible settings for %d\n", target_freq); return -EINVAL; } @@ -356,7 +358,7 @@ struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) clk = clk_get(dev, name); if (IS_ERR(clk)) - printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); + pr_err("failed to get clock '%s'\n", name); return clk; } @@ -378,15 +380,16 @@ static int __init s3c_cpufreq_initclks(void) if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { - printk(KERN_ERR "%s: could not get clock(s)\n", __func__); + pr_err("%s: could not get clock(s)\n", __func__); return -ENOENT; } - printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, - clk_get_rate(clk_fclk) / 1000, - clk_get_rate(clk_hclk) / 1000, - clk_get_rate(clk_pclk) / 1000, - clk_get_rate(clk_arm) / 1000); + pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", + __func__, + clk_get_rate(clk_fclk) / 1000, + clk_get_rate(clk_hclk) / 1000, + clk_get_rate(clk_pclk) / 1000, + clk_get_rate(clk_arm) / 1000); return 0; } @@ -424,7 +427,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); if (ret) { - printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); + pr_err("%s: failed to reset pll/freq\n", __func__); return ret; } @@ -449,13 +452,12 @@ static struct cpufreq_driver s3c24xx_driver = { int s3c_cpufreq_register(struct s3c_cpufreq_info *info) { if (!info || !info->name) { - printk(KERN_ERR "%s: failed to pass valid information\n", - __func__); + pr_err("%s: failed to pass valid information\n", __func__); return -EINVAL; } - printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", - info->name); + pr_info("S3C24XX CPU Frequency driver, %s cpu support\n", + info->name); /* check our driver info has valid data */ @@ -478,7 +480,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) struct s3c_cpufreq_board *ours; if (!board) { - printk(KERN_INFO "%s: no board data\n", __func__); + pr_info("%s: no board data\n", __func__); return -EINVAL; } @@ -487,7 +489,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) ours = kzalloc(sizeof(*ours), GFP_KERNEL); if (ours == NULL) { - printk(KERN_ERR "%s: no memory\n", __func__); + pr_err("%s: no memory\n", __func__); return -ENOMEM; } @@ -502,15 +504,15 @@ static int __init s3c_cpufreq_auto_io(void) int ret; if (!cpu_cur.info->get_iotiming) { - printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); + pr_err("%s: get_iotiming undefined\n", __func__); return -ENOENT; } - printk(KERN_INFO "%s: working out IO settings\n", __func__); + pr_info("%s: working out IO settings\n", __func__); ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); if (ret) - printk(KERN_ERR "%s: failed to get timings\n", __func__); + pr_err("%s: failed to get timings\n", __func__); return ret; } @@ -561,7 +563,7 @@ static void s3c_cpufreq_update_loctkime(void) val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; val |= calc_locktime(rate, cpu_cur.info->locktime_m); - printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); + pr_info("%s: new locktime is 0x%08x\n", __func__, val); __raw_writel(val, S3C2410_LOCKTIME); } @@ -580,7 +582,7 @@ static int s3c_cpufreq_build_freq(void) ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL); if (!ftab) { - printk(KERN_ERR "%s: no memory for tables\n", __func__); + pr_err("%s: no memory for tables\n", __func__); return -ENOMEM; } @@ -608,15 +610,14 @@ static int __init s3c_cpufreq_initcall(void) if (cpu_cur.board->auto_io) { ret = s3c_cpufreq_auto_io(); if (ret) { - printk(KERN_ERR "%s: failed to get io timing\n", + pr_err("%s: failed to get io timing\n", __func__); goto out; } } if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { - printk(KERN_ERR "%s: no IO support registered\n", - __func__); + pr_err("%s: no IO support registered\n", __func__); ret = -EINVAL; goto out; } @@ -666,9 +667,9 @@ int s3c_plltab_register(struct cpufreq_frequency_table *plls, vals += plls_no; vals->frequency = CPUFREQ_TABLE_END; - printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); + pr_info("%d PLL entries\n", plls_no); } else - printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); + pr_err("no memory for PLL tables\n"); return vals ? 0 : -ENOMEM; } diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index a145b319d1717..06d85917b6d5d 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -9,6 +9,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> @@ -205,7 +207,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) } else if (ch == DMC1) { reg = (dmc_base[1] + 0x30); } else { - printk(KERN_ERR "Cannot find DMC port\n"); + pr_err("Cannot find DMC port\n"); return; } @@ -534,7 +536,7 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy) mem_type = check_mem_type(dmc_base[0]); if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { - printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); + pr_err("CPUFreq doesn't support this memory type\n"); ret = -EINVAL; goto out_dmc1; } @@ -635,13 +637,13 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev) arm_regulator = regulator_get(NULL, "vddarm"); if (IS_ERR(arm_regulator)) { - pr_err("failed to get regulator vddarm"); + pr_err("failed to get regulator vddarm\n"); return PTR_ERR(arm_regulator); } int_regulator = regulator_get(NULL, "vddint"); if (IS_ERR(int_regulator)) { - pr_err("failed to get regulator vddint"); + pr_err("failed to get regulator vddint\n"); regulator_put(arm_regulator); return PTR_ERR(int_regulator); } diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index ac84e48180148..4225501a4b785 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -13,6 +13,8 @@ * 2005-03-30: - initial revision */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -30,8 +32,6 @@ static __u8 __iomem *cpuctl; -#define PFX "sc520_freq: " - static struct cpufreq_frequency_table sc520_freq_table[] = { {0, 0x01, 100000}, {0, 0x02, 133000}, @@ -44,8 +44,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) switch (clockspeed_reg & 0x03) { default: - printk(KERN_ERR PFX "error: cpuctl register has unexpected " - "value %02x\n", clockspeed_reg); + pr_err("error: cpuctl register has unexpected value %02x\n", + clockspeed_reg); case 0x01: return 100000; case 0x02: @@ -112,7 +112,7 @@ static int __init sc520_freq_init(void) cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); if (!cpuctl) { - printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + pr_err("sc520_freq: error: failed to remap memory\n"); return -ENOMEM; } diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index de5e89b2eaaa3..e8a7bf57b31b1 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -18,6 +18,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -38,10 +39,20 @@ static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev) return scpi_ops->dvfs_get_info(domain); } -static int scpi_opp_table_ops(struct device *cpu_dev, bool remove) +static int scpi_get_transition_latency(struct device *cpu_dev) { - int idx, ret = 0; + struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + return info->latency; +} + +static int scpi_init_opp_table(const struct cpumask *cpumask) +{ + int idx, ret; struct scpi_opp *opp; + struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask)); struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); if (IS_ERR(info)) @@ -51,11 +62,7 @@ static int scpi_opp_table_ops(struct device *cpu_dev, bool remove) return -EIO; for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) { - if (remove) - dev_pm_opp_remove(cpu_dev, opp->freq); - else - ret = dev_pm_opp_add(cpu_dev, opp->freq, - opp->m_volt * 1000); + ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000); if (ret) { dev_warn(cpu_dev, "failed to add opp %uHz %umV\n", opp->freq, opp->m_volt); @@ -64,33 +71,19 @@ static int scpi_opp_table_ops(struct device *cpu_dev, bool remove) return ret; } } - return ret; -} -static int scpi_get_transition_latency(struct device *cpu_dev) -{ - struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); - - if (IS_ERR(info)) - return PTR_ERR(info); - return info->latency; -} - -static int scpi_init_opp_table(struct device *cpu_dev) -{ - return scpi_opp_table_ops(cpu_dev, false); -} - -static void scpi_free_opp_table(struct device *cpu_dev) -{ - scpi_opp_table_ops(cpu_dev, true); + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask); + if (ret) + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); + return ret; } static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = { .name = "scpi", .get_transition_latency = scpi_get_transition_latency, .init_opp_table = scpi_init_opp_table, - .free_opp_table = scpi_free_opp_table, + .free_opp_table = dev_pm_opp_cpumask_remove_table, }; static int scpi_cpufreq_probe(struct platform_device *pdev) diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index 7d4a315716085..41bc5397f4bbb 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -13,6 +13,8 @@ * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -27,7 +29,6 @@ #include <asm/cpufeature.h> #include <asm/cpu_device_id.h> -#define PFX "speedstep-centrino: " #define MAINTAINER "linux-pm@vger.kernel.org" #define INTEL_MSR_RANGE (0xffff) @@ -386,8 +387,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) /* check to see if it stuck */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO PFX - "couldn't enable Enhanced SpeedStep\n"); + pr_info("couldn't enable Enhanced SpeedStep\n"); return -ENODEV; } } diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c index 37555c6b86a7c..b86953a3ddc4a 100644 --- a/drivers/cpufreq/speedstep-ich.c +++ b/drivers/cpufreq/speedstep-ich.c @@ -18,6 +18,8 @@ * SPEEDSTEP - DEFINITIONS * *********************************************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -68,13 +70,13 @@ static int speedstep_find_register(void) /* get PMBASE */ pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); if (!(pmbase & 0x01)) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + pr_err("could not find speedstep register\n"); return -ENODEV; } pmbase &= 0xFFFFFFFE; if (!pmbase) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + pr_err("could not find speedstep register\n"); return -ENODEV; } @@ -136,7 +138,7 @@ static void speedstep_set_state(unsigned int state) pr_debug("change to %u MHz succeeded\n", speedstep_get_frequency(speedstep_processor) / 1000); else - printk(KERN_ERR "cpufreq: change failed - I/O error\n"); + pr_err("change failed - I/O error\n"); return; } diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c index 15d3214aaa00b..1b8062182c813 100644 --- a/drivers/cpufreq/speedstep-lib.c +++ b/drivers/cpufreq/speedstep-lib.c @@ -8,6 +8,8 @@ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -153,7 +155,7 @@ static unsigned int pentium_core_get_frequency(void) fsb = 333333; break; default: - printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); + pr_err("PCORE - MSR_FSB_FREQ undefined value\n"); } rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); @@ -453,11 +455,8 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor, */ if (*transition_latency > 10000000 || *transition_latency < 50000) { - printk(KERN_WARNING PFX "frequency transition " - "measured seems out of range (%u " - "nSec), falling back to a safe one of" - "%u nSec.\n", - *transition_latency, 500000); + pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n", + *transition_latency, 500000); *transition_latency = 500000; } } diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c index 819229e824fb6..770a9ae1999a9 100644 --- a/drivers/cpufreq/speedstep-smi.c +++ b/drivers/cpufreq/speedstep-smi.c @@ -12,6 +12,8 @@ * SPEEDSTEP - DEFINITIONS * *********************************************************************/ +#define pr_fmt(fmt) "cpufreq: " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -204,9 +206,8 @@ static void speedstep_set_state(unsigned int state) (speedstep_freqs[new_state].frequency / 1000), retry, result); else - printk(KERN_ERR "cpufreq: change to state %u " - "failed with new_state %u and result %u\n", - state, new_state, result); + pr_err("change to state %u failed with new_state %u and result %u\n", + state, new_state, result); return; } diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c index 20bcceb58ccc0..43530254201a8 100644 --- a/drivers/cpufreq/tegra124-cpufreq.c +++ b/drivers/cpufreq/tegra124-cpufreq.c @@ -14,7 +14,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/clk.h> -#include <linux/cpufreq-dt.h> #include <linux/err.h> #include <linux/init.h> #include <linux/kernel.h> @@ -69,10 +68,6 @@ static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv) clk_set_parent(priv->cpu_clk, priv->pllx_clk); } -static struct cpufreq_dt_platform_data cpufreq_dt_pd = { - .independent_clocks = false, -}; - static int tegra124_cpufreq_probe(struct platform_device *pdev) { struct tegra124_cpufreq_priv *priv; @@ -129,8 +124,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) cpufreq_dt_devinfo.name = "cpufreq-dt"; cpufreq_dt_devinfo.parent = &pdev->dev; - cpufreq_dt_devinfo.data = &cpufreq_dt_pd; - cpufreq_dt_devinfo.size_data = sizeof(cpufreq_dt_pd); priv->cpufreq_dt_pdev = platform_device_register_full(&cpufreq_dt_devinfo); diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c index 433e93fd4900a..87e5bdc5ec74c 100644 --- a/drivers/cpufreq/vexpress-spc-cpufreq.c +++ b/drivers/cpufreq/vexpress-spc-cpufreq.c @@ -18,6 +18,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -26,8 +27,9 @@ #include "arm_big_little.h" -static int ve_spc_init_opp_table(struct device *cpu_dev) +static int ve_spc_init_opp_table(const struct cpumask *cpumask) { + struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask)); /* * platform specific SPC code must initialise the opp table * so just check if the OPP count is non-zero diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index f996efc56605a..2b8e6ce62e816 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -173,7 +173,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, struct cpuidle_state *target_state = &drv->states[index]; bool broadcast = !!(target_state->flags & CPUIDLE_FLAG_TIMER_STOP); - ktime_t time_start, time_end; + u64 time_start, time_end; s64 diff; /* @@ -195,13 +195,13 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, sched_idle_set_state(target_state); trace_cpu_idle_rcuidle(index, dev->cpu); - time_start = ktime_get(); + time_start = local_clock(); stop_critical_timings(); entered_state = target_state->enter(dev, drv, index); start_critical_timings(); - time_end = ktime_get(); + time_end = local_clock(); trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu); /* The cpu is no longer idle or about to enter idle. */ @@ -217,7 +217,11 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, if (!cpuidle_state_is_coupled(drv, entered_state)) local_irq_enable(); - diff = ktime_to_us(ktime_sub(time_end, time_start)); + /* + * local_clock() returns the time in nanosecond, let's shift + * by 10 (divide by 1024) to have microsecond based time. + */ + diff = (time_end - time_start) >> 10; if (diff > INT_MAX) diff = INT_MAX; @@ -433,6 +437,8 @@ static void __cpuidle_unregister_device(struct cpuidle_device *dev) list_del(&dev->device_list); per_cpu(cpuidle_devices, dev->cpu) = NULL; module_put(drv->owner); + + dev->registered = 0; } static void __cpuidle_device_init(struct cpuidle_device *dev) diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 4de78c552251a..78dac0e9da111 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -64,30 +64,32 @@ config DEVFREQ_GOV_USERSPACE Otherwise, the governor does not change the frequency given at the initialization. +config DEVFREQ_GOV_PASSIVE + tristate "Passive" + help + Sets the frequency based on the frequency of its parent devfreq + device. This governor does not change the frequency by itself + through sysfs entries. The passive governor recommends that + devfreq device uses the OPP table to get the frequency/voltage. + comment "DEVFREQ Drivers" -config ARM_EXYNOS4_BUS_DEVFREQ - bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" - depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM +config ARM_EXYNOS_BUS_DEVFREQ + bool "ARM EXYNOS Generic Memory Bus DEVFREQ Driver" + depends on ARCH_EXYNOS select DEVFREQ_GOV_SIMPLE_ONDEMAND + select DEVFREQ_GOV_PASSIVE + select DEVFREQ_EVENT_EXYNOS_PPMU + select PM_DEVFREQ_EVENT select PM_OPP help - This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int) - and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int). - It reads PPMU counters of memory controllers and adjusts - the operating frequencies and voltages with OPP support. + This adds the common DEVFREQ driver for Exynos Memory bus. Exynos + Memory bus has one more group of memory bus (e.g, MIF and INT block). + Each memory bus group could contain many memoby bus block. It reads + PPMU counters of memory controllers by using DEVFREQ-event device + and adjusts the operating frequencies and voltages with OPP support. This does not yet operate with optimal voltages. -config ARM_EXYNOS5_BUS_DEVFREQ - tristate "ARM Exynos5250 Bus DEVFREQ Driver" - depends on SOC_EXYNOS5250 - select DEVFREQ_GOV_SIMPLE_ONDEMAND - select PM_OPP - help - This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int). - It reads PPMU counters of memory controllers and adjusts the - operating frequencies and voltages with OPP support. - config ARM_TEGRA_DEVFREQ tristate "Tegra DEVFREQ Driver" depends on ARCH_TEGRA_124_SOC diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile index 5134f9ee983d2..09f11d9d40d59 100644 --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile @@ -4,10 +4,10 @@ obj-$(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) += governor_simpleondemand.o obj-$(CONFIG_DEVFREQ_GOV_PERFORMANCE) += governor_performance.o obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o +obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o # DEVFREQ Drivers -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/ -obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/ +obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o # DEVFREQ Event Drivers diff --git a/drivers/devfreq/devfreq-event.c b/drivers/devfreq/devfreq-event.c index 38bf144ca1479..39b048eda2ce4 100644 --- a/drivers/devfreq/devfreq-event.c +++ b/drivers/devfreq/devfreq-event.c @@ -235,6 +235,11 @@ struct devfreq_event_dev *devfreq_event_get_edev_by_phandle(struct device *dev, mutex_lock(&devfreq_event_list_lock); list_for_each_entry(edev, &devfreq_event_list, node) { + if (edev->dev.parent && edev->dev.parent->of_node == node) + goto out; + } + + list_for_each_entry(edev, &devfreq_event_list, node) { if (!strcmp(edev->desc->name, node->name)) goto out; } diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 984c5e9e7bdd5..1d6c803804d5f 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -25,6 +25,7 @@ #include <linux/list.h> #include <linux/printk.h> #include <linux/hrtimer.h> +#include <linux/of.h> #include "governor.h" static struct class *devfreq_class; @@ -188,6 +189,29 @@ static struct devfreq_governor *find_devfreq_governor(const char *name) return ERR_PTR(-ENODEV); } +static int devfreq_notify_transition(struct devfreq *devfreq, + struct devfreq_freqs *freqs, unsigned int state) +{ + if (!devfreq) + return -EINVAL; + + switch (state) { + case DEVFREQ_PRECHANGE: + srcu_notifier_call_chain(&devfreq->transition_notifier_list, + DEVFREQ_PRECHANGE, freqs); + break; + + case DEVFREQ_POSTCHANGE: + srcu_notifier_call_chain(&devfreq->transition_notifier_list, + DEVFREQ_POSTCHANGE, freqs); + break; + default: + return -EINVAL; + } + + return 0; +} + /* Load monitoring helper functions for governors use */ /** @@ -199,7 +223,8 @@ static struct devfreq_governor *find_devfreq_governor(const char *name) */ int update_devfreq(struct devfreq *devfreq) { - unsigned long freq; + struct devfreq_freqs freqs; + unsigned long freq, cur_freq; int err = 0; u32 flags = 0; @@ -233,10 +258,22 @@ int update_devfreq(struct devfreq *devfreq) flags |= DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use LUB */ } + if (devfreq->profile->get_cur_freq) + devfreq->profile->get_cur_freq(devfreq->dev.parent, &cur_freq); + else + cur_freq = devfreq->previous_freq; + + freqs.old = cur_freq; + freqs.new = freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE); + err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); if (err) return err; + freqs.new = freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); + if (devfreq->profile->freq_table) if (devfreq_update_status(devfreq, freq)) dev_err(&devfreq->dev, @@ -541,6 +578,8 @@ struct devfreq *devfreq_add_device(struct device *dev, goto err_out; } + srcu_init_notifier_head(&devfreq->transition_notifier_list); + mutex_unlock(&devfreq->lock); mutex_lock(&devfreq_list_lock); @@ -639,6 +678,49 @@ struct devfreq *devm_devfreq_add_device(struct device *dev, } EXPORT_SYMBOL(devm_devfreq_add_device); +#ifdef CONFIG_OF +/* + * devfreq_get_devfreq_by_phandle - Get the devfreq device from devicetree + * @dev - instance to the given device + * @index - index into list of devfreq + * + * return the instance of devfreq device + */ +struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index) +{ + struct device_node *node; + struct devfreq *devfreq; + + if (!dev) + return ERR_PTR(-EINVAL); + + if (!dev->of_node) + return ERR_PTR(-EINVAL); + + node = of_parse_phandle(dev->of_node, "devfreq", index); + if (!node) + return ERR_PTR(-ENODEV); + + mutex_lock(&devfreq_list_lock); + list_for_each_entry(devfreq, &devfreq_list, node) { + if (devfreq->dev.parent + && devfreq->dev.parent->of_node == node) { + mutex_unlock(&devfreq_list_lock); + return devfreq; + } + } + mutex_unlock(&devfreq_list_lock); + + return ERR_PTR(-EPROBE_DEFER); +} +#else +struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index) +{ + return ERR_PTR(-ENODEV); +} +#endif /* CONFIG_OF */ +EXPORT_SYMBOL_GPL(devfreq_get_devfreq_by_phandle); + /** * devm_devfreq_remove_device() - Resource-managed devfreq_remove_device() * @dev: the device to add devfreq feature. @@ -1266,6 +1348,129 @@ void devm_devfreq_unregister_opp_notifier(struct device *dev, } EXPORT_SYMBOL(devm_devfreq_unregister_opp_notifier); +/** + * devfreq_register_notifier() - Register a driver with devfreq + * @devfreq: The devfreq object. + * @nb: The notifier block to register. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +int devfreq_register_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + int ret = 0; + + if (!devfreq) + return -EINVAL; + + switch (list) { + case DEVFREQ_TRANSITION_NOTIFIER: + ret = srcu_notifier_chain_register( + &devfreq->transition_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(devfreq_register_notifier); + +/* + * devfreq_unregister_notifier() - Unregister a driver with devfreq + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +int devfreq_unregister_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + int ret = 0; + + if (!devfreq) + return -EINVAL; + + switch (list) { + case DEVFREQ_TRANSITION_NOTIFIER: + ret = srcu_notifier_chain_unregister( + &devfreq->transition_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(devfreq_unregister_notifier); + +struct devfreq_notifier_devres { + struct devfreq *devfreq; + struct notifier_block *nb; + unsigned int list; +}; + +static void devm_devfreq_notifier_release(struct device *dev, void *res) +{ + struct devfreq_notifier_devres *this = res; + + devfreq_unregister_notifier(this->devfreq, this->nb, this->list); +} + +/** + * devm_devfreq_register_notifier() + - Resource-managed devfreq_register_notifier() + * @dev: The devfreq user device. (parent of devfreq) + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +int devm_devfreq_register_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + struct devfreq_notifier_devres *ptr; + int ret; + + ptr = devres_alloc(devm_devfreq_notifier_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = devfreq_register_notifier(devfreq, nb, list); + if (ret) { + devres_free(ptr); + return ret; + } + + ptr->devfreq = devfreq; + ptr->nb = nb; + ptr->list = list; + devres_add(dev, ptr); + + return 0; +} +EXPORT_SYMBOL(devm_devfreq_register_notifier); + +/** + * devm_devfreq_unregister_notifier() + - Resource-managed devfreq_unregister_notifier() + * @dev: The devfreq user device. (parent of devfreq) + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ +void devm_devfreq_unregister_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + WARN_ON(devres_release(dev, devm_devfreq_notifier_release, + devm_devfreq_dev_match, devfreq)); +} +EXPORT_SYMBOL(devm_devfreq_unregister_notifier); + MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); MODULE_DESCRIPTION("devfreq class support"); MODULE_LICENSE("GPL"); diff --git a/drivers/devfreq/event/Kconfig b/drivers/devfreq/event/Kconfig index a11720affc319..1e8b4f469f38d 100644 --- a/drivers/devfreq/event/Kconfig +++ b/drivers/devfreq/event/Kconfig @@ -13,6 +13,14 @@ menuconfig PM_DEVFREQ_EVENT if PM_DEVFREQ_EVENT +config DEVFREQ_EVENT_EXYNOS_NOCP + bool "EXYNOS NoC (Network On Chip) Probe DEVFREQ event Driver" + depends on ARCH_EXYNOS + select PM_OPP + help + This add the devfreq-event driver for Exynos SoC. It provides NoC + (Network on Chip) Probe counters to measure the bandwidth of AXI bus. + config DEVFREQ_EVENT_EXYNOS_PPMU bool "EXYNOS PPMU (Platform Performance Monitoring Unit) DEVFREQ event Driver" depends on ARCH_EXYNOS diff --git a/drivers/devfreq/event/Makefile b/drivers/devfreq/event/Makefile index be146ead79cfb..3d6afd3522535 100644 --- a/drivers/devfreq/event/Makefile +++ b/drivers/devfreq/event/Makefile @@ -1,2 +1,4 @@ # Exynos DEVFREQ Event Drivers + +obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP) += exynos-nocp.o obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU) += exynos-ppmu.o diff --git a/drivers/devfreq/event/exynos-nocp.c b/drivers/devfreq/event/exynos-nocp.c new file mode 100644 index 0000000000000..6b6a5f310486f --- /dev/null +++ b/drivers/devfreq/event/exynos-nocp.c @@ -0,0 +1,304 @@ +/* + * exynos-nocp.c - EXYNOS NoC (Network On Chip) Probe support + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Author : Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/devfreq-event.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "exynos-nocp.h" + +struct exynos_nocp { + struct devfreq_event_dev *edev; + struct devfreq_event_desc desc; + + struct device *dev; + + struct regmap *regmap; + struct clk *clk; +}; + +/* + * The devfreq-event ops structure for nocp probe. + */ +static int exynos_nocp_set_event(struct devfreq_event_dev *edev) +{ + struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev); + int ret; + + /* Disable NoC probe */ + ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK, 0); + if (ret < 0) { + dev_err(nocp->dev, "failed to disable the NoC probe device\n"); + return ret; + } + + /* Set a statistics dump period to 0 */ + ret = regmap_write(nocp->regmap, NOCP_STAT_PERIOD, 0x0); + if (ret < 0) + goto out; + + /* Set the IntEvent fields of *_SRC */ + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_BYTE_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_CHAIN_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_CYCLE_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_SRC, + NOCP_CNT_SRC_INTEVENT_MASK, + NOCP_CNT_SRC_INTEVENT_CHAIN_MASK); + if (ret < 0) + goto out; + + + /* Set an alarm with a max/min value of 0 to generate StatALARM */ + ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MIN, 0x0); + if (ret < 0) + goto out; + + ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MAX, 0x0); + if (ret < 0) + goto out; + + /* Set AlarmMode */ + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_ALARM_MODE, + NOCP_CNT_ALARM_MODE_MASK, + NOCP_CNT_ALARM_MODE_MIN_MAX_MASK); + if (ret < 0) + goto out; + + /* Enable the measurements by setting AlarmEn and StatEn */ + ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK, + NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK); + if (ret < 0) + goto out; + + /* Set GlobalEN */ + ret = regmap_update_bits(nocp->regmap, NOCP_CFG_CTL, + NOCP_CFG_CTL_GLOBALEN_MASK, + NOCP_CFG_CTL_GLOBALEN_MASK); + if (ret < 0) + goto out; + + /* Enable NoC probe */ + ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK, + NOCP_MAIN_CTL_STATEN_MASK); + if (ret < 0) + goto out; + + return 0; + +out: + /* Reset NoC probe */ + if (regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL, + NOCP_MAIN_CTL_STATEN_MASK, 0)) { + dev_err(nocp->dev, "Failed to reset NoC probe device\n"); + } + + return ret; +} + +static int exynos_nocp_get_event(struct devfreq_event_dev *edev, + struct devfreq_event_data *edata) +{ + struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev); + unsigned int counter[4]; + int ret; + + /* Read cycle count */ + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_0_VAL, &counter[0]); + if (ret < 0) + goto out; + + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_1_VAL, &counter[1]); + if (ret < 0) + goto out; + + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_2_VAL, &counter[2]); + if (ret < 0) + goto out; + + ret = regmap_read(nocp->regmap, NOCP_COUNTERS_3_VAL, &counter[3]); + if (ret < 0) + goto out; + + edata->load_count = ((counter[1] << 16) | counter[0]); + edata->total_count = ((counter[3] << 16) | counter[2]); + + dev_dbg(&edev->dev, "%s (event: %ld/%ld)\n", edev->desc->name, + edata->load_count, edata->total_count); + + return 0; + +out: + edata->load_count = 0; + edata->total_count = 0; + + dev_err(nocp->dev, "Failed to read the counter of NoC probe device\n"); + + return ret; +} + +static const struct devfreq_event_ops exynos_nocp_ops = { + .set_event = exynos_nocp_set_event, + .get_event = exynos_nocp_get_event, +}; + +static const struct of_device_id exynos_nocp_id_match[] = { + { .compatible = "samsung,exynos5420-nocp", }, + { /* sentinel */ }, +}; + +static struct regmap_config exynos_nocp_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = NOCP_COUNTERS_3_VAL, +}; + +static int exynos_nocp_parse_dt(struct platform_device *pdev, + struct exynos_nocp *nocp) +{ + struct device *dev = nocp->dev; + struct device_node *np = dev->of_node; + struct resource *res; + void __iomem *base; + + if (!np) { + dev_err(dev, "failed to find devicetree node\n"); + return -EINVAL; + } + + nocp->clk = devm_clk_get(dev, "nocp"); + if (IS_ERR(nocp->clk)) + nocp->clk = NULL; + + /* Maps the memory mapped IO to control nocp register */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (IS_ERR(res)) + return PTR_ERR(res); + + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + exynos_nocp_regmap_config.max_register = resource_size(res) - 4; + + nocp->regmap = devm_regmap_init_mmio(dev, base, + &exynos_nocp_regmap_config); + if (IS_ERR(nocp->regmap)) { + dev_err(dev, "failed to initialize regmap\n"); + return PTR_ERR(nocp->regmap); + } + + return 0; +} + +static int exynos_nocp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct exynos_nocp *nocp; + int ret; + + nocp = devm_kzalloc(&pdev->dev, sizeof(*nocp), GFP_KERNEL); + if (!nocp) + return -ENOMEM; + + nocp->dev = &pdev->dev; + + /* Parse dt data to get resource */ + ret = exynos_nocp_parse_dt(pdev, nocp); + if (ret < 0) { + dev_err(&pdev->dev, + "failed to parse devicetree for resource\n"); + return ret; + } + + /* Add devfreq-event device to measure the bandwidth of NoC */ + nocp->desc.ops = &exynos_nocp_ops; + nocp->desc.driver_data = nocp; + nocp->desc.name = np->full_name; + nocp->edev = devm_devfreq_event_add_edev(&pdev->dev, &nocp->desc); + if (IS_ERR(nocp->edev)) { + dev_err(&pdev->dev, + "failed to add devfreq-event device\n"); + return PTR_ERR(nocp->edev); + } + platform_set_drvdata(pdev, nocp); + + clk_prepare_enable(nocp->clk); + + pr_info("exynos-nocp: new NoC Probe device registered: %s\n", + dev_name(dev)); + + return 0; +} + +static int exynos_nocp_remove(struct platform_device *pdev) +{ + struct exynos_nocp *nocp = platform_get_drvdata(pdev); + + clk_disable_unprepare(nocp->clk); + + return 0; +} + +static struct platform_driver exynos_nocp_driver = { + .probe = exynos_nocp_probe, + .remove = exynos_nocp_remove, + .driver = { + .name = "exynos-nocp", + .of_match_table = exynos_nocp_id_match, + }, +}; +module_platform_driver(exynos_nocp_driver); + +MODULE_DESCRIPTION("Exynos NoC (Network on Chip) Probe driver"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/devfreq/event/exynos-nocp.h b/drivers/devfreq/event/exynos-nocp.h new file mode 100644 index 0000000000000..28564db0edb86 --- /dev/null +++ b/drivers/devfreq/event/exynos-nocp.h @@ -0,0 +1,78 @@ +/* + * exynos-nocp.h - EXYNOS NoC (Network on Chip) Probe header file + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Author : Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __EXYNOS_NOCP_H__ +#define __EXYNOS_NOCP_H__ + +enum nocp_reg { + NOCP_ID_REVISION_ID = 0x04, + NOCP_MAIN_CTL = 0x08, + NOCP_CFG_CTL = 0x0C, + + NOCP_STAT_PERIOD = 0x24, + NOCP_STAT_GO = 0x28, + NOCP_STAT_ALARM_MIN = 0x2C, + NOCP_STAT_ALARM_MAX = 0x30, + NOCP_STAT_ALARM_STATUS = 0x34, + NOCP_STAT_ALARM_CLR = 0x38, + + NOCP_COUNTERS_0_SRC = 0x138, + NOCP_COUNTERS_0_ALARM_MODE = 0x13C, + NOCP_COUNTERS_0_VAL = 0x140, + + NOCP_COUNTERS_1_SRC = 0x14C, + NOCP_COUNTERS_1_ALARM_MODE = 0x150, + NOCP_COUNTERS_1_VAL = 0x154, + + NOCP_COUNTERS_2_SRC = 0x160, + NOCP_COUNTERS_2_ALARM_MODE = 0x164, + NOCP_COUNTERS_2_VAL = 0x168, + + NOCP_COUNTERS_3_SRC = 0x174, + NOCP_COUNTERS_3_ALARM_MODE = 0x178, + NOCP_COUNTERS_3_VAL = 0x17C, +}; + +/* NOCP_MAIN_CTL register */ +#define NOCP_MAIN_CTL_ERREN_MASK BIT(0) +#define NOCP_MAIN_CTL_TRACEEN_MASK BIT(1) +#define NOCP_MAIN_CTL_PAYLOADEN_MASK BIT(2) +#define NOCP_MAIN_CTL_STATEN_MASK BIT(3) +#define NOCP_MAIN_CTL_ALARMEN_MASK BIT(4) +#define NOCP_MAIN_CTL_STATCONDDUMP_MASK BIT(5) +#define NOCP_MAIN_CTL_INTRUSIVEMODE_MASK BIT(6) + +/* NOCP_CFG_CTL register */ +#define NOCP_CFG_CTL_GLOBALEN_MASK BIT(0) +#define NOCP_CFG_CTL_ACTIVE_MASK BIT(1) + +/* NOCP_COUNTERS_x_SRC register */ +#define NOCP_CNT_SRC_INTEVENT_SHIFT 0 +#define NOCP_CNT_SRC_INTEVENT_MASK (0x1F << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_OFF_MASK (0x0 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_CYCLE_MASK (0x1 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_IDLE_MASK (0x2 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_XFER_MASK (0x3 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_BUSY_MASK (0x4 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_WAIT_MASK (0x5 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_PKT_MASK (0x6 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_BYTE_MASK (0x8 << NOCP_CNT_SRC_INTEVENT_SHIFT) +#define NOCP_CNT_SRC_INTEVENT_CHAIN_MASK (0x10 << NOCP_CNT_SRC_INTEVENT_SHIFT) + +/* NOCP_COUNTERS_x_ALARM_MODE register */ +#define NOCP_CNT_ALARM_MODE_SHIFT 0 +#define NOCP_CNT_ALARM_MODE_MASK (0x3 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_OFF_MASK (0x0 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_MIN_MASK (0x1 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_MAX_MASK (0x2 << NOCP_CNT_ALARM_MODE_SHIFT) +#define NOCP_CNT_ALARM_MODE_MIN_MAX_MASK (0x3 << NOCP_CNT_ALARM_MODE_SHIFT) + +#endif /* __EXYNOS_NOCP_H__ */ diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c new file mode 100644 index 0000000000000..2363d0a189b77 --- /dev/null +++ b/drivers/devfreq/exynos-bus.c @@ -0,0 +1,570 @@ +/* + * Generic Exynos Bus frequency driver with DEVFREQ Framework + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Author : Chanwoo Choi <cw00.choi@samsung.com> + * + * This driver support Exynos Bus frequency feature by using + * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/devfreq.h> +#include <linux/devfreq-event.h> +#include <linux/device.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#define DEFAULT_SATURATION_RATIO 40 +#define DEFAULT_VOLTAGE_TOLERANCE 2 + +struct exynos_bus { + struct device *dev; + + struct devfreq *devfreq; + struct devfreq_event_dev **edev; + unsigned int edev_count; + struct mutex lock; + + struct dev_pm_opp *curr_opp; + + struct regulator *regulator; + struct clk *clk; + unsigned int voltage_tolerance; + unsigned int ratio; +}; + +/* + * Control the devfreq-event device to get the current state of bus + */ +#define exynos_bus_ops_edev(ops) \ +static int exynos_bus_##ops(struct exynos_bus *bus) \ +{ \ + int i, ret; \ + \ + for (i = 0; i < bus->edev_count; i++) { \ + if (!bus->edev[i]) \ + continue; \ + ret = devfreq_event_##ops(bus->edev[i]); \ + if (ret < 0) \ + return ret; \ + } \ + \ + return 0; \ +} +exynos_bus_ops_edev(enable_edev); +exynos_bus_ops_edev(disable_edev); +exynos_bus_ops_edev(set_event); + +static int exynos_bus_get_event(struct exynos_bus *bus, + struct devfreq_event_data *edata) +{ + struct devfreq_event_data event_data; + unsigned long load_count = 0, total_count = 0; + int i, ret = 0; + + for (i = 0; i < bus->edev_count; i++) { + if (!bus->edev[i]) + continue; + + ret = devfreq_event_get_event(bus->edev[i], &event_data); + if (ret < 0) + return ret; + + if (i == 0 || event_data.load_count > load_count) { + load_count = event_data.load_count; + total_count = event_data.total_count; + } + } + + edata->load_count = load_count; + edata->total_count = total_count; + + return ret; +} + +/* + * Must necessary function for devfreq simple-ondemand governor + */ +static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + struct dev_pm_opp *new_opp; + unsigned long old_freq, new_freq, old_volt, new_volt, tol; + int ret = 0; + + /* Get new opp-bus instance according to new bus clock */ + rcu_read_lock(); + new_opp = devfreq_recommended_opp(dev, freq, flags); + if (IS_ERR(new_opp)) { + dev_err(dev, "failed to get recommended opp instance\n"); + rcu_read_unlock(); + return PTR_ERR(new_opp); + } + + new_freq = dev_pm_opp_get_freq(new_opp); + new_volt = dev_pm_opp_get_voltage(new_opp); + old_freq = dev_pm_opp_get_freq(bus->curr_opp); + old_volt = dev_pm_opp_get_voltage(bus->curr_opp); + rcu_read_unlock(); + + if (old_freq == new_freq) + return 0; + tol = new_volt * bus->voltage_tolerance / 100; + + /* Change voltage and frequency according to new OPP level */ + mutex_lock(&bus->lock); + + if (old_freq < new_freq) { + ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol); + if (ret < 0) { + dev_err(bus->dev, "failed to set voltage\n"); + goto out; + } + } + + ret = clk_set_rate(bus->clk, new_freq); + if (ret < 0) { + dev_err(dev, "failed to change clock of bus\n"); + clk_set_rate(bus->clk, old_freq); + goto out; + } + + if (old_freq > new_freq) { + ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol); + if (ret < 0) { + dev_err(bus->dev, "failed to set voltage\n"); + goto out; + } + } + bus->curr_opp = new_opp; + + dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n", + old_freq/1000, new_freq/1000); +out: + mutex_unlock(&bus->lock); + + return ret; +} + +static int exynos_bus_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + struct devfreq_event_data edata; + int ret; + + rcu_read_lock(); + stat->current_frequency = dev_pm_opp_get_freq(bus->curr_opp); + rcu_read_unlock(); + + ret = exynos_bus_get_event(bus, &edata); + if (ret < 0) { + stat->total_time = stat->busy_time = 0; + goto err; + } + + stat->busy_time = (edata.load_count * 100) / bus->ratio; + stat->total_time = edata.total_count; + + dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time, + stat->total_time); + +err: + ret = exynos_bus_set_event(bus); + if (ret < 0) { + dev_err(dev, "failed to set event to devfreq-event devices\n"); + return ret; + } + + return ret; +} + +static void exynos_bus_exit(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + int ret; + + ret = exynos_bus_disable_edev(bus); + if (ret < 0) + dev_warn(dev, "failed to disable the devfreq-event devices\n"); + + if (bus->regulator) + regulator_disable(bus->regulator); + + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(bus->clk); +} + +/* + * Must necessary function for devfreq passive governor + */ +static int exynos_bus_passive_target(struct device *dev, unsigned long *freq, + u32 flags) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + struct dev_pm_opp *new_opp; + unsigned long old_freq, new_freq; + int ret = 0; + + /* Get new opp-bus instance according to new bus clock */ + rcu_read_lock(); + new_opp = devfreq_recommended_opp(dev, freq, flags); + if (IS_ERR(new_opp)) { + dev_err(dev, "failed to get recommended opp instance\n"); + rcu_read_unlock(); + return PTR_ERR(new_opp); + } + + new_freq = dev_pm_opp_get_freq(new_opp); + old_freq = dev_pm_opp_get_freq(bus->curr_opp); + rcu_read_unlock(); + + if (old_freq == new_freq) + return 0; + + /* Change the frequency according to new OPP level */ + mutex_lock(&bus->lock); + + ret = clk_set_rate(bus->clk, new_freq); + if (ret < 0) { + dev_err(dev, "failed to set the clock of bus\n"); + goto out; + } + + *freq = new_freq; + bus->curr_opp = new_opp; + + dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n", + old_freq/1000, new_freq/1000); +out: + mutex_unlock(&bus->lock); + + return ret; +} + +static void exynos_bus_passive_exit(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(bus->clk); +} + +static int exynos_bus_parent_parse_of(struct device_node *np, + struct exynos_bus *bus) +{ + struct device *dev = bus->dev; + int i, ret, count, size; + + /* Get the regulator to provide each bus with the power */ + bus->regulator = devm_regulator_get(dev, "vdd"); + if (IS_ERR(bus->regulator)) { + dev_err(dev, "failed to get VDD regulator\n"); + return PTR_ERR(bus->regulator); + } + + ret = regulator_enable(bus->regulator); + if (ret < 0) { + dev_err(dev, "failed to enable VDD regulator\n"); + return ret; + } + + /* + * Get the devfreq-event devices to get the current utilization of + * buses. This raw data will be used in devfreq ondemand governor. + */ + count = devfreq_event_get_edev_count(dev); + if (count < 0) { + dev_err(dev, "failed to get the count of devfreq-event dev\n"); + ret = count; + goto err_regulator; + } + bus->edev_count = count; + + size = sizeof(*bus->edev) * count; + bus->edev = devm_kzalloc(dev, size, GFP_KERNEL); + if (!bus->edev) { + ret = -ENOMEM; + goto err_regulator; + } + + for (i = 0; i < count; i++) { + bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, i); + if (IS_ERR(bus->edev[i])) { + ret = -EPROBE_DEFER; + goto err_regulator; + } + } + + /* + * Optionally, Get the saturation ratio according to Exynos SoC + * When measuring the utilization of each AXI bus with devfreq-event + * devices, the measured real cycle might be much lower than the + * total cycle of bus during sampling rate. In result, the devfreq + * simple-ondemand governor might not decide to change the current + * frequency due to too utilization (= real cycle/total cycle). + * So, this property is used to adjust the utilization when calculating + * the busy_time in exynos_bus_get_dev_status(). + */ + if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio)) + bus->ratio = DEFAULT_SATURATION_RATIO; + + if (of_property_read_u32(np, "exynos,voltage-tolerance", + &bus->voltage_tolerance)) + bus->voltage_tolerance = DEFAULT_VOLTAGE_TOLERANCE; + + return 0; + +err_regulator: + regulator_disable(bus->regulator); + + return ret; +} + +static int exynos_bus_parse_of(struct device_node *np, + struct exynos_bus *bus) +{ + struct device *dev = bus->dev; + unsigned long rate; + int ret; + + /* Get the clock to provide each bus with source clock */ + bus->clk = devm_clk_get(dev, "bus"); + if (IS_ERR(bus->clk)) { + dev_err(dev, "failed to get bus clock\n"); + return PTR_ERR(bus->clk); + } + + ret = clk_prepare_enable(bus->clk); + if (ret < 0) { + dev_err(dev, "failed to get enable clock\n"); + return ret; + } + + /* Get the freq and voltage from OPP table to scale the bus freq */ + rcu_read_lock(); + ret = dev_pm_opp_of_add_table(dev); + if (ret < 0) { + dev_err(dev, "failed to get OPP table\n"); + rcu_read_unlock(); + goto err_clk; + } + + rate = clk_get_rate(bus->clk); + bus->curr_opp = devfreq_recommended_opp(dev, &rate, 0); + if (IS_ERR(bus->curr_opp)) { + dev_err(dev, "failed to find dev_pm_opp\n"); + rcu_read_unlock(); + ret = PTR_ERR(bus->curr_opp); + goto err_opp; + } + rcu_read_unlock(); + + return 0; + +err_opp: + dev_pm_opp_of_remove_table(dev); +err_clk: + clk_disable_unprepare(bus->clk); + + return ret; +} + +static int exynos_bus_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct devfreq_dev_profile *profile; + struct devfreq_simple_ondemand_data *ondemand_data; + struct devfreq_passive_data *passive_data; + struct devfreq *parent_devfreq; + struct exynos_bus *bus; + int ret, max_state; + unsigned long min_freq, max_freq; + + if (!np) { + dev_err(dev, "failed to find devicetree node\n"); + return -EINVAL; + } + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + mutex_init(&bus->lock); + bus->dev = &pdev->dev; + platform_set_drvdata(pdev, bus); + + /* Parse the device-tree to get the resource information */ + ret = exynos_bus_parse_of(np, bus); + if (ret < 0) + goto err; + + profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL); + if (!profile) { + ret = -ENOMEM; + goto err; + } + + if (of_parse_phandle(dev->of_node, "devfreq", 0)) + goto passive; + else + ret = exynos_bus_parent_parse_of(np, bus); + + if (ret < 0) + goto err; + + /* Initialize the struct profile and governor data for parent device */ + profile->polling_ms = 50; + profile->target = exynos_bus_target; + profile->get_dev_status = exynos_bus_get_dev_status; + profile->exit = exynos_bus_exit; + + ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL); + if (!ondemand_data) { + ret = -ENOMEM; + goto err; + } + ondemand_data->upthreshold = 40; + ondemand_data->downdifferential = 5; + + /* Add devfreq device to monitor and handle the exynos bus */ + bus->devfreq = devm_devfreq_add_device(dev, profile, "simple_ondemand", + ondemand_data); + if (IS_ERR(bus->devfreq)) { + dev_err(dev, "failed to add devfreq device\n"); + ret = PTR_ERR(bus->devfreq); + goto err; + } + + /* Register opp_notifier to catch the change of OPP */ + ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq); + if (ret < 0) { + dev_err(dev, "failed to register opp notifier\n"); + goto err; + } + + /* + * Enable devfreq-event to get raw data which is used to determine + * current bus load. + */ + ret = exynos_bus_enable_edev(bus); + if (ret < 0) { + dev_err(dev, "failed to enable devfreq-event devices\n"); + goto err; + } + + ret = exynos_bus_set_event(bus); + if (ret < 0) { + dev_err(dev, "failed to set event to devfreq-event devices\n"); + goto err; + } + + goto out; +passive: + /* Initialize the struct profile and governor data for passive device */ + profile->target = exynos_bus_passive_target; + profile->exit = exynos_bus_passive_exit; + + /* Get the instance of parent devfreq device */ + parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0); + if (IS_ERR(parent_devfreq)) { + ret = -EPROBE_DEFER; + goto err; + } + + passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL); + if (!passive_data) { + ret = -ENOMEM; + goto err; + } + passive_data->parent = parent_devfreq; + + /* Add devfreq device for exynos bus with passive governor */ + bus->devfreq = devm_devfreq_add_device(dev, profile, "passive", + passive_data); + if (IS_ERR(bus->devfreq)) { + dev_err(dev, + "failed to add devfreq dev with passive governor\n"); + ret = -EPROBE_DEFER; + goto err; + } + +out: + max_state = bus->devfreq->profile->max_state; + min_freq = (bus->devfreq->profile->freq_table[0] / 1000); + max_freq = (bus->devfreq->profile->freq_table[max_state - 1] / 1000); + pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n", + dev_name(dev), min_freq, max_freq); + + return 0; + +err: + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(bus->clk); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int exynos_bus_resume(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + int ret; + + ret = exynos_bus_enable_edev(bus); + if (ret < 0) { + dev_err(dev, "failed to enable the devfreq-event devices\n"); + return ret; + } + + return 0; +} + +static int exynos_bus_suspend(struct device *dev) +{ + struct exynos_bus *bus = dev_get_drvdata(dev); + int ret; + + ret = exynos_bus_disable_edev(bus); + if (ret < 0) { + dev_err(dev, "failed to disable the devfreq-event devices\n"); + return ret; + } + + return 0; +} +#endif + +static const struct dev_pm_ops exynos_bus_pm = { + SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume) +}; + +static const struct of_device_id exynos_bus_of_match[] = { + { .compatible = "samsung,exynos-bus", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, exynos_bus_of_match); + +static struct platform_driver exynos_bus_platdrv = { + .probe = exynos_bus_probe, + .driver = { + .name = "exynos-bus", + .pm = &exynos_bus_pm, + .of_match_table = of_match_ptr(exynos_bus_of_match), + }, +}; +module_platform_driver(exynos_bus_platdrv); + +MODULE_DESCRIPTION("Generic Exynos Bus frequency driver"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile deleted file mode 100644 index 49bc9175f9235..0000000000000 --- a/drivers/devfreq/exynos/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# Exynos DEVFREQ Drivers -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos_ppmu.o exynos4_bus.o -obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c deleted file mode 100644 index da95092051693..0000000000000 --- a/drivers/devfreq/exynos/exynos4_bus.c +++ /dev/null @@ -1,1055 +0,0 @@ -/* drivers/devfreq/exynos4210_memorybus.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework - * This version supports EXYNOS4210 only. This changes bus frequencies - * and vddint voltages. Exynos4412/4212 should be able to be supported - * with minor modifications. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/suspend.h> -#include <linux/pm_opp.h> -#include <linux/devfreq.h> -#include <linux/platform_device.h> -#include <linux/regulator/consumer.h> -#include <linux/module.h> - -#include <mach/map.h> - -#include "exynos_ppmu.h" -#include "exynos4_bus.h" - -#define MAX_SAFEVOLT 1200000 /* 1.2V */ - -enum exynos4_busf_type { - TYPE_BUSF_EXYNOS4210, - TYPE_BUSF_EXYNOS4x12, -}; - -/* Assume that the bus is saturated if the utilization is 40% */ -#define BUS_SATURATION_RATIO 40 - -enum busclk_level_idx { - LV_0 = 0, - LV_1, - LV_2, - LV_3, - LV_4, - _LV_END -}; - -enum exynos_ppmu_idx { - PPMU_DMC0, - PPMU_DMC1, - PPMU_END, -}; - -#define EX4210_LV_MAX LV_2 -#define EX4x12_LV_MAX LV_4 -#define EX4210_LV_NUM (LV_2 + 1) -#define EX4x12_LV_NUM (LV_4 + 1) - -/** - * struct busfreq_opp_info - opp information for bus - * @rate: Frequency in hertz - * @volt: Voltage in microvolts corresponding to this OPP - */ -struct busfreq_opp_info { - unsigned long rate; - unsigned long volt; -}; - -struct busfreq_data { - enum exynos4_busf_type type; - struct device *dev; - struct devfreq *devfreq; - bool disabled; - struct regulator *vdd_int; - struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct busfreq_opp_info curr_oppinfo; - struct busfreq_ppmu_data ppmu_data; - - struct notifier_block pm_notifier; - struct mutex lock; - - /* Dividers calculated at boot/probe-time */ - unsigned int dmc_divtable[_LV_END]; /* DMC0 */ - unsigned int top_divtable[_LV_END]; -}; - -/* 4210 controls clock of mif and voltage of int */ -static struct bus_opp_table exynos4210_busclk_table[] = { - {LV_0, 400000, 1150000}, - {LV_1, 267000, 1050000}, - {LV_2, 133000, 1025000}, - {0, 0, 0}, -}; - -/* - * MIF is the main control knob clock for Exynos4x12 MIF/INT - * clock and voltage of both mif/int are controlled. - */ -static struct bus_opp_table exynos4x12_mifclk_table[] = { - {LV_0, 400000, 1100000}, - {LV_1, 267000, 1000000}, - {LV_2, 160000, 950000}, - {LV_3, 133000, 950000}, - {LV_4, 100000, 950000}, - {0, 0, 0}, -}; - -/* - * INT is not the control knob of 4x12. LV_x is not meant to represent - * the current performance. (MIF does) - */ -static struct bus_opp_table exynos4x12_intclk_table[] = { - {LV_0, 200000, 1000000}, - {LV_1, 160000, 950000}, - {LV_2, 133000, 925000}, - {LV_3, 100000, 900000}, - {0, 0, 0}, -}; - -/* TODO: asv volt definitions are "__initdata"? */ -/* Some chips have different operating voltages */ -static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = { - {1150000, 1050000, 1050000}, - {1125000, 1025000, 1025000}, - {1100000, 1000000, 1000000}, - {1075000, 975000, 975000}, - {1050000, 950000, 950000}, -}; - -static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = { - /* 400 267 160 133 100 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */ - {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */ - {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */ - {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = { - /* 200 160 133 100 */ - {1000000, 950000, 925000, 900000}, /* ASV0 */ - {975000, 925000, 925000, 900000}, /* ASV1 */ - {950000, 925000, 900000, 875000}, /* ASV2 */ - {950000, 900000, 900000, 875000}, /* ASV3 */ - {925000, 875000, 875000, 875000}, /* ASV4 */ - {900000, 850000, 850000, 850000}, /* ASV5 */ - {900000, 850000, 850000, 850000}, /* ASV6 */ - {900000, 850000, 850000, 850000}, /* ASV7 */ - {900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -/*** Clock Divider Data for Exynos4210 ***/ -static unsigned int exynos4210_clkdiv_dmc0[][8] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } - */ - - /* DMC L0: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - /* DMC L1: 266.7MHz */ - { 4, 1, 1, 2, 1, 1, 3, 1 }, - /* DMC L2: 133MHz */ - { 5, 1, 1, 5, 1, 1, 3, 1 }, -}; -static unsigned int exynos4210_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } - */ - /* ACLK200 L0: 200MHz */ - { 3, 7, 4, 5, 1 }, - /* ACLK200 L1: 160MHz */ - { 4, 7, 5, 6, 1 }, - /* ACLK200 L2: 133MHz */ - { 5, 7, 7, 7, 1 }, -}; -static unsigned int exynos4210_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - /* ACLK_GDL/R L1: 200MHz */ - { 3, 1 }, - /* ACLK_GDL/R L2: 160MHz */ - { 4, 1 }, - /* ACLK_GDL/R L3: 133MHz */ - { 5, 1 }, -}; - -/*** Clock Divider Data for Exynos4212/4412 ***/ -static unsigned int exynos4x12_clkdiv_dmc0[][6] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP} - */ - - /* DMC L0: 400MHz */ - {3, 1, 1, 1, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 1, 1, 2, 1, 1}, - /* DMC L2: 160MHz */ - {5, 1, 1, 4, 1, 1}, - /* DMC L3: 133MHz */ - {5, 1, 1, 5, 1, 1}, - /* DMC L4: 100MHz */ - {7, 1, 1, 7, 1, 1}, -}; -static unsigned int exynos4x12_clkdiv_dmc1[][6] = { - /* - * Clock divider value for following - * { G2DACP, DIVC2C, DIVC2C_ACLK } - */ - - /* DMC L0: 400MHz */ - {3, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 2, 1}, - /* DMC L2: 160MHz */ - {5, 4, 1}, - /* DMC L3: 133MHz */ - {5, 5, 1}, - /* DMC L4: 100MHz */ - {7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK266_GPS, DIVACLK100, DIVACLK160, - DIVACLK133, DIVONENAND } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 7, 7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {5, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 1}, -}; -static unsigned int exynos4x12_clkdiv_sclkip[][3] = { - /* - * Clock divider value for following - * { DIVMFC, DIVJPEG, DIVFIMC0~3} - */ - - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 160MHz */ - {4, 4, 5}, - /* SCLK_MFC: 133MHz */ - {5, 5, 5}, - /* SCLK_MFC: 100MHz */ - {7, 7, 7}, -}; - - -static int exynos4210_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4210_LV_NUM; index++) - if (oppi->rate == exynos4210_busclk_table[index].clk) - break; - - if (index == EX4210_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - TOP */ - tmp = data->top_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - return 0; -} - -static int exynos4x12_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (oppi->rate == exynos4x12_mifclk_table[index].clk) - break; - - if (index == EX4x12_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - DMC1 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1); - - tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK | - EXYNOS4_CLKDIV_DMC1_C2C_MASK | - EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc1[index][0] << - EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][1] << - EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][2] << - EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1); - } while (tmp & 0x111111); - - /* Change Divider - TOP */ - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4x12_clkdiv_top[index][0] << - EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) | - (exynos4x12_clkdiv_top[index][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4x12_clkdiv_top[index][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4x12_clkdiv_top[index][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4x12_clkdiv_top[index][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - /* Change Divider - MFC */ - tmp = __raw_readl(EXYNOS4_CLKDIV_MFC); - - tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][0] << - EXYNOS4_CLKDIV_MFC_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_MFC); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC); - } while (tmp & 0x1); - - /* Change Divider - JPEG */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1); - - tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][1] << - EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1); - - /* Change Divider - FIMC0~3 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM); - - tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK | - EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1111); - - return 0; -} - -static int exynos4x12_get_intspec(unsigned long mifclk) -{ - int i = 0; - - while (exynos4x12_intclk_table[i].clk) { - if (exynos4x12_intclk_table[i].clk <= mifclk) - return i; - i++; - } - - return -EINVAL; -} - -static int exynos4_bus_setvolt(struct busfreq_data *data, - struct busfreq_opp_info *oppi, - struct busfreq_opp_info *oldoppi) -{ - int err = 0, tmp; - unsigned long volt = oppi->volt; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - /* OPP represents DMC clock + INT voltage */ - err = regulator_set_voltage(data->vdd_int, volt, - MAX_SAFEVOLT); - break; - case TYPE_BUSF_EXYNOS4x12: - /* OPP represents MIF clock + MIF voltage */ - err = regulator_set_voltage(data->vdd_mif, volt, - MAX_SAFEVOLT); - if (err) - break; - - tmp = exynos4x12_get_intspec(oppi->rate); - if (tmp < 0) { - err = tmp; - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - } - err = regulator_set_voltage(data->vdd_int, - exynos4x12_intclk_table[tmp].volt, - MAX_SAFEVOLT); - /* Try to recover */ - if (err) - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - default: - err = -EINVAL; - } - - return err; -} - -static int exynos4_bus_target(struct device *dev, unsigned long *_freq, - u32 flags) -{ - int err = 0; - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data *data = platform_get_drvdata(pdev); - struct dev_pm_opp *opp; - unsigned long freq; - unsigned long old_freq = data->curr_oppinfo.rate; - struct busfreq_opp_info new_oppinfo; - - rcu_read_lock(); - opp = devfreq_recommended_opp(dev, _freq, flags); - if (IS_ERR(opp)) { - rcu_read_unlock(); - return PTR_ERR(opp); - } - new_oppinfo.rate = dev_pm_opp_get_freq(opp); - new_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - freq = new_oppinfo.rate; - - if (old_freq == freq) - return 0; - - dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt); - - mutex_lock(&data->lock); - - if (data->disabled) - goto out; - - if (old_freq < freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - if (old_freq != freq) { - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - } - if (err) - goto out; - - if (old_freq > freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - data->curr_oppinfo = new_oppinfo; -out: - mutex_unlock(&data->lock); - return err; -} - -static int exynos4_bus_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - int busier; - - exynos_read_ppmu(ppmu_data); - busier = exynos_get_busier_ppmu(ppmu_data); - stat->current_frequency = data->curr_oppinfo.rate; - - /* Number of cycles spent on memory access */ - stat->busy_time = ppmu_data->ppmu[busier].count[PPMU_PMNCNT3]; - stat->busy_time *= 100 / BUS_SATURATION_RATIO; - stat->total_time = ppmu_data->ppmu[busier].ccnt; - - /* If the counters have overflown, retry */ - if (ppmu_data->ppmu[busier].ccnt_overflow || - ppmu_data->ppmu[busier].count_overflow[0]) - return -EAGAIN; - - return 0; -} - -static struct devfreq_dev_profile exynos4_devfreq_profile = { - .initial_freq = 400000, - .polling_ms = 50, - .target = exynos4_bus_target, - .get_dev_status = exynos4_bus_get_dev_status, -}; - -static int exynos4210_init_tables(struct busfreq_data *data) -{ - u32 tmp; - int mgrp; - int i, err = 0; - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK | - EXYNOS4_CLKDIV_DMC0_COPY2_MASK | - EXYNOS4_CLKDIV_DMC0_CORETI_MASK); - - tmp |= ((exynos4210_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4210_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4210_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4210_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4210_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][6] << - EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) | - (exynos4210_clkdiv_dmc0[i][7] << - EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4210_clkdiv_top[i][0] << - EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) | - (exynos4210_clkdiv_top[i][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4210_clkdiv_top[i][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4210_clkdiv_top[i][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4210_clkdiv_top[i][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - data->top_divtable[i] = tmp; - } - - /* - * TODO: init tmp based on busfreq_data - * (device-tree or platform-data) - */ - tmp = 0; /* Max voltages for the reliability of the unknown */ - - pr_debug("ASV Group of Exynos4 is %d\n", tmp); - /* Use merged grouping for voltage */ - switch (tmp) { - case 0: - mgrp = 0; - break; - case 1: - case 2: - mgrp = 1; - break; - case 3: - case 4: - mgrp = 2; - break; - case 5: - case 6: - mgrp = 3; - break; - case 7: - mgrp = 4; - break; - default: - pr_warn("Unknown ASV Group. Use max voltage.\n"); - mgrp = 0; - } - - for (i = LV_0; i < EX4210_LV_NUM; i++) - exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i]; - - for (i = LV_0; i < EX4210_LV_NUM; i++) { - err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk, - exynos4210_busclk_table[i].volt); - if (err) { - dev_err(data->dev, "Cannot add opp entries.\n"); - return err; - } - } - - - return 0; -} - -static int exynos4x12_init_tables(struct busfreq_data *data) -{ - unsigned int i; - unsigned int tmp; - int ret; - - /* Enable pause function for DREX2 DVFS */ - tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL); - tmp |= EXYNOS4_DMC_PAUSE_ENABLE; - __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL); - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - - tmp = 0; /* Max voltages for the reliability of the unknown */ - - if (tmp > 8) - tmp = 0; - pr_debug("ASV Group of Exynos4x12 is %d\n", tmp); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - exynos4x12_mifclk_table[i].volt = - exynos4x12_mif_step_50[tmp][i]; - exynos4x12_intclk_table[i].volt = - exynos4x12_int_volt[tmp][i]; - } - - for (i = 0; i < EX4x12_LV_NUM; i++) { - ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk, - exynos4x12_mifclk_table[i].volt); - if (ret) { - dev_err(data->dev, "Fail to add opp entries.\n"); - return ret; - } - } - - return 0; -} - -static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct busfreq_data *data = container_of(this, struct busfreq_data, - pm_notifier); - struct dev_pm_opp *opp; - struct busfreq_opp_info new_oppinfo; - unsigned long maxfreq = ULONG_MAX; - int err = 0; - - switch (event) { - case PM_SUSPEND_PREPARE: - /* Set Fastest and Deactivate DVFS */ - mutex_lock(&data->lock); - - data->disabled = true; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(data->dev, "%s: unable to find a min freq\n", - __func__); - mutex_unlock(&data->lock); - return PTR_ERR(opp); - } - new_oppinfo.rate = dev_pm_opp_get_freq(opp); - new_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto unlock; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - if (err) - goto unlock; - - data->curr_oppinfo = new_oppinfo; -unlock: - mutex_unlock(&data->lock); - if (err) - return err; - return NOTIFY_OK; - case PM_POST_RESTORE: - case PM_POST_SUSPEND: - /* Reactivate */ - mutex_lock(&data->lock); - data->disabled = false; - mutex_unlock(&data->lock); - return NOTIFY_OK; - } - - return NOTIFY_DONE; -} - -static int exynos4_busfreq_probe(struct platform_device *pdev) -{ - struct busfreq_data *data; - struct busfreq_ppmu_data *ppmu_data; - struct dev_pm_opp *opp; - struct device *dev = &pdev->dev; - int err = 0; - - data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL); - if (data == NULL) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - - ppmu_data = &data->ppmu_data; - ppmu_data->ppmu_end = PPMU_END; - ppmu_data->ppmu = devm_kzalloc(dev, - sizeof(struct exynos_ppmu) * PPMU_END, - GFP_KERNEL); - if (!ppmu_data->ppmu) { - dev_err(dev, "Failed to allocate memory for exynos_ppmu\n"); - return -ENOMEM; - } - - data->type = pdev->id_entry->driver_data; - ppmu_data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0; - ppmu_data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1; - data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event; - data->dev = dev; - mutex_init(&data->lock); - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_init_tables(data); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_init_tables(data); - break; - default: - dev_err(dev, "Cannot determine the device id %d\n", data->type); - err = -EINVAL; - } - if (err) { - dev_err(dev, "Cannot initialize busfreq table %d\n", - data->type); - return err; - } - - data->vdd_int = devm_regulator_get(dev, "vdd_int"); - if (IS_ERR(data->vdd_int)) { - dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); - return PTR_ERR(data->vdd_int); - } - if (data->type == TYPE_BUSF_EXYNOS4x12) { - data->vdd_mif = devm_regulator_get(dev, "vdd_mif"); - if (IS_ERR(data->vdd_mif)) { - dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n"); - return PTR_ERR(data->vdd_mif); - } - } - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(dev, - &exynos4_devfreq_profile.initial_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "Invalid initial frequency %lu kHz.\n", - exynos4_devfreq_profile.initial_freq); - return PTR_ERR(opp); - } - data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp); - data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - platform_set_drvdata(pdev, data); - - data->devfreq = devm_devfreq_add_device(dev, &exynos4_devfreq_profile, - "simple_ondemand", NULL); - if (IS_ERR(data->devfreq)) - return PTR_ERR(data->devfreq); - - /* - * Start PPMU (Performance Profiling Monitoring Unit) to check - * utilization of each IP in the Exynos4 SoC. - */ - busfreq_mon_reset(ppmu_data); - - /* Register opp_notifier for Exynos4 busfreq */ - err = devm_devfreq_register_opp_notifier(dev, data->devfreq); - if (err < 0) { - dev_err(dev, "Failed to register opp notifier\n"); - return err; - } - - /* Register pm_notifier for Exynos4 busfreq */ - err = register_pm_notifier(&data->pm_notifier); - if (err) { - dev_err(dev, "Failed to setup pm notifier\n"); - return err; - } - - return 0; -} - -static int exynos4_busfreq_remove(struct platform_device *pdev) -{ - struct busfreq_data *data = platform_get_drvdata(pdev); - - /* Unregister all of notifier chain */ - unregister_pm_notifier(&data->pm_notifier); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int exynos4_busfreq_resume(struct device *dev) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - - busfreq_mon_reset(ppmu_data); - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(exynos4_busfreq_pm_ops, NULL, exynos4_busfreq_resume); - -static const struct platform_device_id exynos4_busfreq_id[] = { - { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 }, - { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { }, -}; - -static struct platform_driver exynos4_busfreq_driver = { - .probe = exynos4_busfreq_probe, - .remove = exynos4_busfreq_remove, - .id_table = exynos4_busfreq_id, - .driver = { - .name = "exynos4-busfreq", - .pm = &exynos4_busfreq_pm_ops, - }, -}; - -static int __init exynos4_busfreq_init(void) -{ - return platform_driver_register(&exynos4_busfreq_driver); -} -late_initcall(exynos4_busfreq_init); - -static void __exit exynos4_busfreq_exit(void) -{ - platform_driver_unregister(&exynos4_busfreq_driver); -} -module_exit(exynos4_busfreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework"); -MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); diff --git a/drivers/devfreq/exynos/exynos4_bus.h b/drivers/devfreq/exynos/exynos4_bus.h deleted file mode 100644 index 94c73c18d28cd..0000000000000 --- a/drivers/devfreq/exynos/exynos4_bus.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS4 BUS header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __DEVFREQ_EXYNOS4_BUS_H -#define __DEVFREQ_EXYNOS4_BUS_H __FILE__ - -#include <mach/map.h> - -#define EXYNOS4_CLKDIV_LEFTBUS (S5P_VA_CMU + 0x04500) -#define EXYNOS4_CLKDIV_STAT_LEFTBUS (S5P_VA_CMU + 0x04600) - -#define EXYNOS4_CLKDIV_RIGHTBUS (S5P_VA_CMU + 0x08500) -#define EXYNOS4_CLKDIV_STAT_RIGHTBUS (S5P_VA_CMU + 0x08600) - -#define EXYNOS4_CLKDIV_TOP (S5P_VA_CMU + 0x0C510) -#define EXYNOS4_CLKDIV_CAM (S5P_VA_CMU + 0x0C520) -#define EXYNOS4_CLKDIV_MFC (S5P_VA_CMU + 0x0C528) - -#define EXYNOS4_CLKDIV_STAT_TOP (S5P_VA_CMU + 0x0C610) -#define EXYNOS4_CLKDIV_STAT_MFC (S5P_VA_CMU + 0x0C628) - -#define EXYNOS4210_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x0C930) -#define EXYNOS4212_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x04930) - -#define EXYNOS4_CLKDIV_DMC0 (S5P_VA_CMU + 0x10500) -#define EXYNOS4_CLKDIV_DMC1 (S5P_VA_CMU + 0x10504) -#define EXYNOS4_CLKDIV_STAT_DMC0 (S5P_VA_CMU + 0x10600) -#define EXYNOS4_CLKDIV_STAT_DMC1 (S5P_VA_CMU + 0x10604) - -#define EXYNOS4_DMC_PAUSE_CTRL (S5P_VA_CMU + 0x11094) -#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0) - -#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0) -#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4) -#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8) -#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12) -#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16) -#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20) -#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24) -#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) -#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28) -#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT) - -#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0) -#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4) -#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8) -#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12) -#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16) -#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT) -#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24) -#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT) - -#define EXYNOS4_CLKDIV_MFC_SHIFT (0) -#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT) - -#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0) -#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4) -#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8) -#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12) -#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16) -#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20) -#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) -#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24) -#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT) - -#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0) -#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) -#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4) -#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT) - -#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0) -#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) -#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4) -#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) -#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8) -#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) -#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12) -#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT) - -#define EXYNOS4_CLKDIV_CAM1 (S5P_VA_CMU + 0x0C568) - -#define EXYNOS4_CLKDIV_STAT_CAM1 (S5P_VA_CMU + 0x0C668) - -#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0) -#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT) - -#endif /* __DEVFREQ_EXYNOS4_BUS_H */ diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c deleted file mode 100644 index 297ea30d41597..0000000000000 --- a/drivers/devfreq/exynos/exynos5_bus.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework - * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com> - * Support for only EXYNOS5250 is present. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/devfreq.h> -#include <linux/io.h> -#include <linux/pm_opp.h> -#include <linux/slab.h> -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/pm_qos.h> -#include <linux/regulator/consumer.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> - -#include "exynos_ppmu.h" - -#define MAX_SAFEVOLT 1100000 /* 1.10V */ -/* Assume that the bus is saturated if the utilization is 25% */ -#define INT_BUS_SATURATION_RATIO 25 - -enum int_level_idx { - LV_0, - LV_1, - LV_2, - LV_3, - LV_4, - _LV_END -}; - -enum exynos_ppmu_list { - PPMU_RIGHT, - PPMU_END, -}; - -struct busfreq_data_int { - struct device *dev; - struct devfreq *devfreq; - struct regulator *vdd_int; - struct busfreq_ppmu_data ppmu_data; - unsigned long curr_freq; - bool disabled; - - struct notifier_block pm_notifier; - struct mutex lock; - struct pm_qos_request int_req; - struct clk *int_clk; -}; - -struct int_bus_opp_table { - unsigned int idx; - unsigned long clk; - unsigned long volt; -}; - -static struct int_bus_opp_table exynos5_int_opp_table[] = { - {LV_0, 266000, 1025000}, - {LV_1, 200000, 1025000}, - {LV_2, 160000, 1025000}, - {LV_3, 133000, 1025000}, - {LV_4, 100000, 1025000}, - {0, 0, 0}, -}; - -static int exynos5_int_setvolt(struct busfreq_data_int *data, - unsigned long volt) -{ - return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT); -} - -static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, - u32 flags) -{ - int err = 0; - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct dev_pm_opp *opp; - unsigned long old_freq, freq; - unsigned long volt; - - rcu_read_lock(); - opp = devfreq_recommended_opp(dev, _freq, flags); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "%s: Invalid OPP.\n", __func__); - return PTR_ERR(opp); - } - - freq = dev_pm_opp_get_freq(opp); - volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - old_freq = data->curr_freq; - - if (old_freq == freq) - return 0; - - dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt); - - mutex_lock(&data->lock); - - if (data->disabled) - goto out; - - if (freq > exynos5_int_opp_table[0].clk) - pm_qos_update_request(&data->int_req, freq * 16 / 1000); - else - pm_qos_update_request(&data->int_req, -1); - - if (old_freq < freq) - err = exynos5_int_setvolt(data, volt); - if (err) - goto out; - - err = clk_set_rate(data->int_clk, freq * 1000); - - if (err) - goto out; - - if (old_freq > freq) - err = exynos5_int_setvolt(data, volt); - if (err) - goto out; - - data->curr_freq = freq; -out: - mutex_unlock(&data->lock); - return err; -} - -static int exynos5_int_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - int busier_dmc; - - exynos_read_ppmu(ppmu_data); - busier_dmc = exynos_get_busier_ppmu(ppmu_data); - - stat->current_frequency = data->curr_freq; - - /* Number of cycles spent on memory access */ - stat->busy_time = ppmu_data->ppmu[busier_dmc].count[PPMU_PMNCNT3]; - stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO; - stat->total_time = ppmu_data->ppmu[busier_dmc].ccnt; - - return 0; -} - -static struct devfreq_dev_profile exynos5_devfreq_int_profile = { - .initial_freq = 160000, - .polling_ms = 100, - .target = exynos5_busfreq_int_target, - .get_dev_status = exynos5_int_get_dev_status, -}; - -static int exynos5250_init_int_tables(struct busfreq_data_int *data) -{ - int i, err = 0; - - for (i = LV_0; i < _LV_END; i++) { - err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk, - exynos5_int_opp_table[i].volt); - if (err) { - dev_err(data->dev, "Cannot add opp entries.\n"); - return err; - } - } - - return 0; -} - -static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct busfreq_data_int *data = container_of(this, - struct busfreq_data_int, pm_notifier); - struct dev_pm_opp *opp; - unsigned long maxfreq = ULONG_MAX; - unsigned long freq; - unsigned long volt; - int err = 0; - - switch (event) { - case PM_SUSPEND_PREPARE: - /* Set Fastest and Deactivate DVFS */ - mutex_lock(&data->lock); - - data->disabled = true; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - err = PTR_ERR(opp); - goto unlock; - } - freq = dev_pm_opp_get_freq(opp); - volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - err = exynos5_int_setvolt(data, volt); - if (err) - goto unlock; - - err = clk_set_rate(data->int_clk, freq * 1000); - - if (err) - goto unlock; - - data->curr_freq = freq; -unlock: - mutex_unlock(&data->lock); - if (err) - return NOTIFY_BAD; - return NOTIFY_OK; - case PM_POST_RESTORE: - case PM_POST_SUSPEND: - /* Reactivate */ - mutex_lock(&data->lock); - data->disabled = false; - mutex_unlock(&data->lock); - return NOTIFY_OK; - } - - return NOTIFY_DONE; -} - -static int exynos5_busfreq_int_probe(struct platform_device *pdev) -{ - struct busfreq_data_int *data; - struct busfreq_ppmu_data *ppmu_data; - struct dev_pm_opp *opp; - struct device *dev = &pdev->dev; - struct device_node *np; - unsigned long initial_freq; - unsigned long initial_volt; - int err = 0; - int i; - - data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int), - GFP_KERNEL); - if (data == NULL) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - - ppmu_data = &data->ppmu_data; - ppmu_data->ppmu_end = PPMU_END; - ppmu_data->ppmu = devm_kzalloc(dev, - sizeof(struct exynos_ppmu) * PPMU_END, - GFP_KERNEL); - if (!ppmu_data->ppmu) { - dev_err(dev, "Failed to allocate memory for exynos_ppmu\n"); - return -ENOMEM; - } - - np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu"); - if (np == NULL) { - pr_err("Unable to find PPMU node\n"); - return -ENOENT; - } - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - /* map PPMU memory region */ - ppmu_data->ppmu[i].hw_base = of_iomap(np, i); - if (ppmu_data->ppmu[i].hw_base == NULL) { - dev_err(&pdev->dev, "failed to map memory region\n"); - return -ENOMEM; - } - } - data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event; - data->dev = dev; - mutex_init(&data->lock); - - err = exynos5250_init_int_tables(data); - if (err) - return err; - - data->vdd_int = devm_regulator_get(dev, "vdd_int"); - if (IS_ERR(data->vdd_int)) { - dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); - return PTR_ERR(data->vdd_int); - } - - data->int_clk = devm_clk_get(dev, "int_clk"); - if (IS_ERR(data->int_clk)) { - dev_err(dev, "Cannot get clock \"int_clk\"\n"); - return PTR_ERR(data->int_clk); - } - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(dev, - &exynos5_devfreq_int_profile.initial_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "Invalid initial frequency %lu kHz.\n", - exynos5_devfreq_int_profile.initial_freq); - return PTR_ERR(opp); - } - initial_freq = dev_pm_opp_get_freq(opp); - initial_volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - data->curr_freq = initial_freq; - - err = clk_set_rate(data->int_clk, initial_freq * 1000); - if (err) { - dev_err(dev, "Failed to set initial frequency\n"); - return err; - } - - err = exynos5_int_setvolt(data, initial_volt); - if (err) - return err; - - platform_set_drvdata(pdev, data); - - busfreq_mon_reset(ppmu_data); - - data->devfreq = devm_devfreq_add_device(dev, &exynos5_devfreq_int_profile, - "simple_ondemand", NULL); - if (IS_ERR(data->devfreq)) - return PTR_ERR(data->devfreq); - - err = devm_devfreq_register_opp_notifier(dev, data->devfreq); - if (err < 0) { - dev_err(dev, "Failed to register opp notifier\n"); - return err; - } - - err = register_pm_notifier(&data->pm_notifier); - if (err) { - dev_err(dev, "Failed to setup pm notifier\n"); - return err; - } - - /* TODO: Add a new QOS class for int/mif bus */ - pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1); - - return 0; -} - -static int exynos5_busfreq_int_remove(struct platform_device *pdev) -{ - struct busfreq_data_int *data = platform_get_drvdata(pdev); - - pm_qos_remove_request(&data->int_req); - unregister_pm_notifier(&data->pm_notifier); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int exynos5_busfreq_int_resume(struct device *dev) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - - busfreq_mon_reset(ppmu_data); - return 0; -} -static const struct dev_pm_ops exynos5_busfreq_int_pm = { - .resume = exynos5_busfreq_int_resume, -}; -#endif -static SIMPLE_DEV_PM_OPS(exynos5_busfreq_int_pm_ops, NULL, - exynos5_busfreq_int_resume); - -/* platform device pointer for exynos5 devfreq device. */ -static struct platform_device *exynos5_devfreq_pdev; - -static struct platform_driver exynos5_busfreq_int_driver = { - .probe = exynos5_busfreq_int_probe, - .remove = exynos5_busfreq_int_remove, - .driver = { - .name = "exynos5-bus-int", - .pm = &exynos5_busfreq_int_pm_ops, - }, -}; - -static int __init exynos5_busfreq_int_init(void) -{ - int ret; - - ret = platform_driver_register(&exynos5_busfreq_int_driver); - if (ret < 0) - goto out; - - exynos5_devfreq_pdev = - platform_device_register_simple("exynos5-bus-int", -1, NULL, 0); - if (IS_ERR(exynos5_devfreq_pdev)) { - ret = PTR_ERR(exynos5_devfreq_pdev); - goto out1; - } - - return 0; -out1: - platform_driver_unregister(&exynos5_busfreq_int_driver); -out: - return ret; -} -late_initcall(exynos5_busfreq_int_init); - -static void __exit exynos5_busfreq_int_exit(void) -{ - platform_device_unregister(exynos5_devfreq_pdev); - platform_driver_unregister(&exynos5_busfreq_int_driver); -} -module_exit(exynos5_busfreq_int_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework"); diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c deleted file mode 100644 index 97b75e513d291..0000000000000 --- a/drivers/devfreq/exynos/exynos_ppmu.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS - PPMU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> - -#include "exynos_ppmu.h" - -void exynos_ppmu_reset(void __iomem *ppmu_base) -{ - __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base); - __raw_writel(PPMU_ENABLE_CYCLE | - PPMU_ENABLE_COUNT0 | - PPMU_ENABLE_COUNT1 | - PPMU_ENABLE_COUNT2 | - PPMU_ENABLE_COUNT3, - ppmu_base + PPMU_CNTENS); -} - -void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, - unsigned int evt) -{ - __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch)); -} - -void exynos_ppmu_start(void __iomem *ppmu_base) -{ - __raw_writel(PPMU_ENABLE, ppmu_base); -} - -void exynos_ppmu_stop(void __iomem *ppmu_base) -{ - __raw_writel(PPMU_DISABLE, ppmu_base); -} - -unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch) -{ - unsigned int total; - - if (ch == PPMU_PMNCNT3) - total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) | - __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1))); - else - total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch)); - - return total; -} - -void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data) -{ - unsigned int i; - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base; - - /* Reset the performance and cycle counters */ - exynos_ppmu_reset(ppmu_base); - - /* Setup count registers to monitor read/write transactions */ - ppmu_data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT; - exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3, - ppmu_data->ppmu[i].event[PPMU_PMNCNT3]); - - exynos_ppmu_start(ppmu_base); - } -} -EXPORT_SYMBOL(busfreq_mon_reset); - -void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data) -{ - int i, j; - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base; - - exynos_ppmu_stop(ppmu_base); - - /* Update local data from PPMU */ - ppmu_data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT); - - for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { - if (ppmu_data->ppmu[i].event[j] == 0) - ppmu_data->ppmu[i].count[j] = 0; - else - ppmu_data->ppmu[i].count[j] = - exynos_ppmu_read(ppmu_base, j); - } - } - - busfreq_mon_reset(ppmu_data); -} -EXPORT_SYMBOL(exynos_read_ppmu); - -int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data) -{ - unsigned int count = 0; - int i, j, busy = 0; - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { - if (ppmu_data->ppmu[i].count[j] > count) { - count = ppmu_data->ppmu[i].count[j]; - busy = i; - } - } - } - - return busy; -} -EXPORT_SYMBOL(exynos_get_busier_ppmu); diff --git a/drivers/devfreq/exynos/exynos_ppmu.h b/drivers/devfreq/exynos/exynos_ppmu.h deleted file mode 100644 index 71f17ba3563cb..0000000000000 --- a/drivers/devfreq/exynos/exynos_ppmu.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS PPMU header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __DEVFREQ_EXYNOS_PPMU_H -#define __DEVFREQ_EXYNOS_PPMU_H __FILE__ - -#include <linux/ktime.h> - -/* For PPMU Control */ -#define PPMU_ENABLE BIT(0) -#define PPMU_DISABLE 0x0 -#define PPMU_CYCLE_RESET BIT(1) -#define PPMU_COUNTER_RESET BIT(2) - -#define PPMU_ENABLE_COUNT0 BIT(0) -#define PPMU_ENABLE_COUNT1 BIT(1) -#define PPMU_ENABLE_COUNT2 BIT(2) -#define PPMU_ENABLE_COUNT3 BIT(3) -#define PPMU_ENABLE_CYCLE BIT(31) - -#define PPMU_CNTENS 0x10 -#define PPMU_FLAG 0x50 -#define PPMU_CCNT_OVERFLOW BIT(31) -#define PPMU_CCNT 0x100 - -#define PPMU_PMCNT0 0x110 -#define PPMU_PMCNT_OFFSET 0x10 -#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x)) - -#define PPMU_BEVT0SEL 0x1000 -#define PPMU_BEVTSEL_OFFSET 0x100 -#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET)) - -/* For Event Selection */ -#define RD_DATA_COUNT 0x5 -#define WR_DATA_COUNT 0x6 -#define RDWR_DATA_COUNT 0x7 - -enum ppmu_counter { - PPMU_PMNCNT0, - PPMU_PMCCNT1, - PPMU_PMNCNT2, - PPMU_PMNCNT3, - PPMU_PMNCNT_MAX, -}; - -struct bus_opp_table { - unsigned int idx; - unsigned long clk; - unsigned long volt; -}; - -struct exynos_ppmu { - void __iomem *hw_base; - unsigned int ccnt; - unsigned int event[PPMU_PMNCNT_MAX]; - unsigned int count[PPMU_PMNCNT_MAX]; - unsigned long long ns; - ktime_t reset_time; - bool ccnt_overflow; - bool count_overflow[PPMU_PMNCNT_MAX]; -}; - -struct busfreq_ppmu_data { - struct exynos_ppmu *ppmu; - int ppmu_end; -}; - -void exynos_ppmu_reset(void __iomem *ppmu_base); -void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, - unsigned int evt); -void exynos_ppmu_start(void __iomem *ppmu_base); -void exynos_ppmu_stop(void __iomem *ppmu_base); -unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch); -void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data); -void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data); -int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data); -#endif /* __DEVFREQ_EXYNOS_PPMU_H */ diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c new file mode 100644 index 0000000000000..9ef46e2592c45 --- /dev/null +++ b/drivers/devfreq/governor_passive.c @@ -0,0 +1,205 @@ +/* + * linux/drivers/devfreq/governor_passive.c + * + * Copyright (C) 2016 Samsung Electronics + * Author: Chanwoo Choi <cw00.choi@samsung.com> + * Author: MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/devfreq.h> +#include "governor.h" + +static int devfreq_passive_get_target_freq(struct devfreq *devfreq, + unsigned long *freq) +{ + struct devfreq_passive_data *p_data + = (struct devfreq_passive_data *)devfreq->data; + struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent; + unsigned long child_freq = ULONG_MAX; + struct dev_pm_opp *opp; + int i, count, ret = 0; + + /* + * If the devfreq device with passive governor has the specific method + * to determine the next frequency, should use the get_target_freq() + * of struct devfreq_passive_data. + */ + if (p_data->get_target_freq) { + ret = p_data->get_target_freq(devfreq, freq); + goto out; + } + + /* + * If the parent and passive devfreq device uses the OPP table, + * get the next frequency by using the OPP table. + */ + + /* + * - parent devfreq device uses the governors except for passive. + * - passive devfreq device uses the passive governor. + * + * Each devfreq has the OPP table. After deciding the new frequency + * from the governor of parent devfreq device, the passive governor + * need to get the index of new frequency on OPP table of parent + * device. And then the index is used for getting the suitable + * new frequency for passive devfreq device. + */ + if (!devfreq->profile || !devfreq->profile->freq_table + || devfreq->profile->max_state <= 0) + return -EINVAL; + + /* + * The passive governor have to get the correct frequency from OPP + * list of parent device. Because in this case, *freq is temporary + * value which is decided by ondemand governor. + */ + rcu_read_lock(); + opp = devfreq_recommended_opp(parent_devfreq->dev.parent, freq, 0); + rcu_read_unlock(); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + goto out; + } + + /* + * Get the OPP table's index of decided freqeuncy by governor + * of parent device. + */ + for (i = 0; i < parent_devfreq->profile->max_state; i++) + if (parent_devfreq->profile->freq_table[i] == *freq) + break; + + if (i == parent_devfreq->profile->max_state) { + ret = -EINVAL; + goto out; + } + + /* Get the suitable frequency by using index of parent device. */ + if (i < devfreq->profile->max_state) { + child_freq = devfreq->profile->freq_table[i]; + } else { + count = devfreq->profile->max_state; + child_freq = devfreq->profile->freq_table[count - 1]; + } + + /* Return the suitable frequency for passive device. */ + *freq = child_freq; + +out: + return ret; +} + +static int update_devfreq_passive(struct devfreq *devfreq, unsigned long freq) +{ + int ret; + + if (!devfreq->governor) + return -EINVAL; + + mutex_lock_nested(&devfreq->lock, SINGLE_DEPTH_NESTING); + + ret = devfreq->governor->get_target_freq(devfreq, &freq); + if (ret < 0) + goto out; + + ret = devfreq->profile->target(devfreq->dev.parent, &freq, 0); + if (ret < 0) + goto out; + + devfreq->previous_freq = freq; + +out: + mutex_unlock(&devfreq->lock); + + return 0; +} + +static int devfreq_passive_notifier_call(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct devfreq_passive_data *data + = container_of(nb, struct devfreq_passive_data, nb); + struct devfreq *devfreq = (struct devfreq *)data->this; + struct devfreq *parent = (struct devfreq *)data->parent; + struct devfreq_freqs *freqs = (struct devfreq_freqs *)ptr; + unsigned long freq = freqs->new; + + switch (event) { + case DEVFREQ_PRECHANGE: + if (parent->previous_freq > freq) + update_devfreq_passive(devfreq, freq); + break; + case DEVFREQ_POSTCHANGE: + if (parent->previous_freq < freq) + update_devfreq_passive(devfreq, freq); + break; + } + + return NOTIFY_DONE; +} + +static int devfreq_passive_event_handler(struct devfreq *devfreq, + unsigned int event, void *data) +{ + struct device *dev = devfreq->dev.parent; + struct devfreq_passive_data *p_data + = (struct devfreq_passive_data *)devfreq->data; + struct devfreq *parent = (struct devfreq *)p_data->parent; + struct notifier_block *nb = &p_data->nb; + int ret = 0; + + if (!parent) + return -EPROBE_DEFER; + + switch (event) { + case DEVFREQ_GOV_START: + if (!p_data->this) + p_data->this = devfreq; + + nb->notifier_call = devfreq_passive_notifier_call; + ret = devm_devfreq_register_notifier(dev, parent, nb, + DEVFREQ_TRANSITION_NOTIFIER); + break; + case DEVFREQ_GOV_STOP: + devm_devfreq_unregister_notifier(dev, parent, nb, + DEVFREQ_TRANSITION_NOTIFIER); + break; + default: + break; + } + + return ret; +} + +static struct devfreq_governor devfreq_passive = { + .name = "passive", + .get_target_freq = devfreq_passive_get_target_freq, + .event_handler = devfreq_passive_event_handler, +}; + +static int __init devfreq_passive_init(void) +{ + return devfreq_add_governor(&devfreq_passive); +} +subsys_initcall(devfreq_passive_init); + +static void __exit devfreq_passive_exit(void) +{ + int ret; + + ret = devfreq_remove_governor(&devfreq_passive); + if (ret) + pr_err("%s: failed remove governor %d\n", __func__, ret); +} +module_exit(devfreq_passive_exit); + +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); +MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); +MODULE_DESCRIPTION("DEVFREQ Passive governor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c index b5d05807e6ecd..fa4ea22ca12e5 100644 --- a/drivers/firmware/psci.c +++ b/drivers/firmware/psci.c @@ -355,7 +355,7 @@ int psci_cpu_suspend_enter(unsigned long index) /* ARM specific CPU idle operations */ #ifdef CONFIG_ARM -static struct cpuidle_ops psci_cpuidle_ops __initdata = { +static const struct cpuidle_ops psci_cpuidle_ops __initconst = { .suspend = psci_cpu_suspend_enter, .init = psci_dt_cpu_init_idle, }; diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index c6935de425fa2..c96649292b556 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -766,6 +766,67 @@ static struct cpuidle_state knl_cstates[] = { .enter = NULL } }; +static struct cpuidle_state bxt_cstates[] = { + { + .name = "C1-BXT", + .desc = "MWAIT 0x00", + .flags = MWAIT2flg(0x00), + .exit_latency = 2, + .target_residency = 2, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, + { + .name = "C1E-BXT", + .desc = "MWAIT 0x01", + .flags = MWAIT2flg(0x01), + .exit_latency = 10, + .target_residency = 20, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, + { + .name = "C6-BXT", + .desc = "MWAIT 0x20", + .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 133, + .target_residency = 133, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, + { + .name = "C7s-BXT", + .desc = "MWAIT 0x31", + .flags = MWAIT2flg(0x31) | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 155, + .target_residency = 155, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, + { + .name = "C8-BXT", + .desc = "MWAIT 0x40", + .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 1000, + .target_residency = 1000, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, + { + .name = "C9-BXT", + .desc = "MWAIT 0x50", + .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 2000, + .target_residency = 2000, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, + { + .name = "C10-BXT", + .desc = "MWAIT 0x60", + .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED, + .exit_latency = 10000, + .target_residency = 10000, + .enter = &intel_idle, + .enter_freeze = intel_idle_freeze, }, + { + .enter = NULL } +}; + /** * intel_idle * @dev: cpuidle_device @@ -950,6 +1011,11 @@ static const struct idle_cpu idle_cpu_knl = { .state_table = knl_cstates, }; +static const struct idle_cpu idle_cpu_bxt = { + .state_table = bxt_cstates, + .disable_promotion_to_c1e = true, +}; + #define ICPU(model, cpu) \ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu } @@ -985,6 +1051,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = { ICPU(0x9e, idle_cpu_skl), ICPU(0x55, idle_cpu_skx), ICPU(0x57, idle_cpu_knl), + ICPU(0x5c, idle_cpu_bxt), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids); @@ -1075,6 +1142,73 @@ static void ivt_idle_state_table_update(void) /* else, 1 and 2 socket systems use default ivt_cstates */ } + +/* + * Translate IRTL (Interrupt Response Time Limit) MSR to usec + */ + +static unsigned int irtl_ns_units[] = { + 1, 32, 1024, 32768, 1048576, 33554432, 0, 0 }; + +static unsigned long long irtl_2_usec(unsigned long long irtl) +{ + unsigned long long ns; + + ns = irtl_ns_units[(irtl >> 10) & 0x3]; + + return div64_u64((irtl & 0x3FF) * ns, 1000); +} +/* + * bxt_idle_state_table_update(void) + * + * On BXT, we trust the IRTL to show the definitive maximum latency + * We use the same value for target_residency. + */ +static void bxt_idle_state_table_update(void) +{ + unsigned long long msr; + + rdmsrl(MSR_PKGC6_IRTL, msr); + if (msr) { + unsigned int usec = irtl_2_usec(msr); + + bxt_cstates[2].exit_latency = usec; + bxt_cstates[2].target_residency = usec; + } + + rdmsrl(MSR_PKGC7_IRTL, msr); + if (msr) { + unsigned int usec = irtl_2_usec(msr); + + bxt_cstates[3].exit_latency = usec; + bxt_cstates[3].target_residency = usec; + } + + rdmsrl(MSR_PKGC8_IRTL, msr); + if (msr) { + unsigned int usec = irtl_2_usec(msr); + + bxt_cstates[4].exit_latency = usec; + bxt_cstates[4].target_residency = usec; + } + + rdmsrl(MSR_PKGC9_IRTL, msr); + if (msr) { + unsigned int usec = irtl_2_usec(msr); + + bxt_cstates[5].exit_latency = usec; + bxt_cstates[5].target_residency = usec; + } + + rdmsrl(MSR_PKGC10_IRTL, msr); + if (msr) { + unsigned int usec = irtl_2_usec(msr); + + bxt_cstates[6].exit_latency = usec; + bxt_cstates[6].target_residency = usec; + } + +} /* * sklh_idle_state_table_update(void) * @@ -1130,6 +1264,9 @@ static void intel_idle_state_table_update(void) case 0x3e: /* IVT */ ivt_idle_state_table_update(); break; + case 0x5c: /* BXT */ + bxt_idle_state_table_update(); + break; case 0x5e: /* SKL-H */ sklh_idle_state_table_update(); break; diff --git a/drivers/mmc/host/toshsd.c b/drivers/mmc/host/toshsd.c index e2cdd5fb14237..553ef41bb8066 100644 --- a/drivers/mmc/host/toshsd.c +++ b/drivers/mmc/host/toshsd.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/power/avs/rockchip-io-domain.c index 8986382718dd0..01b6d3f9b8fb3 100644 --- a/drivers/power/avs/rockchip-io-domain.c +++ b/drivers/power/avs/rockchip-io-domain.c @@ -336,6 +336,7 @@ static int rockchip_iodomain_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; struct rockchip_iodomain *iod; + struct device *parent; int i, ret = 0; if (!np) @@ -351,7 +352,14 @@ static int rockchip_iodomain_probe(struct platform_device *pdev) match = of_match_node(rockchip_iodomain_match, np); iod->soc_data = (struct rockchip_iodomain_soc_data *)match->data; - iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + parent = pdev->dev.parent; + if (parent && parent->of_node) { + iod->grf = syscon_node_to_regmap(parent->of_node); + } else { + dev_dbg(&pdev->dev, "falling back to old binding\n"); + iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + } + if (IS_ERR(iod->grf)) { dev_err(&pdev->dev, "couldn't find grf regmap\n"); return PTR_ERR(iod->grf); diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index f2201d42a9cdd..b2766b867b0eb 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -1115,6 +1115,8 @@ static const struct x86_cpu_id rapl_ids[] __initconst = { RAPL_CPU(0X5C, rapl_defaults_core),/* Broxton */ RAPL_CPU(0x5E, rapl_defaults_core),/* Skylake-H/S */ RAPL_CPU(0x57, rapl_defaults_hsw_server),/* Knights Landing */ + RAPL_CPU(0x8E, rapl_defaults_core),/* Kabylake */ + RAPL_CPU(0x9E, rapl_defaults_core),/* Kabylake */ {} }; MODULE_DEVICE_TABLE(x86cpu, rapl_ids); diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c index 5548a31e1a39a..1fcbb22a4a1c6 100644 --- a/drivers/soc/qcom/spm.c +++ b/drivers/soc/qcom/spm.c @@ -274,7 +274,7 @@ check_spm: return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO; } -static struct cpuidle_ops qcom_cpuidle_ops __initdata = { +static const struct cpuidle_ops qcom_cpuidle_ops __initconst = { .suspend = qcom_idle_enter, .init = qcom_cpuidle_init, }; diff --git a/include/linux/cpufreq-dt.h b/include/linux/cpufreq-dt.h deleted file mode 100644 index 0414009e2c306..0000000000000 --- a/include/linux/cpufreq-dt.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2014 Marvell - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __CPUFREQ_DT_H__ -#define __CPUFREQ_DT_H__ - -struct cpufreq_dt_platform_data { - /* - * True when each CPU has its own clock to control its - * frequency, false when all CPUs are controlled by a single - * clock. - */ - bool independent_clocks; -}; - -#endif /* __CPUFREQ_DT_H__ */ diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 718e8725de8aa..4e81e08db7522 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -102,6 +102,17 @@ struct cpufreq_policy { */ struct rw_semaphore rwsem; + /* + * Fast switch flags: + * - fast_switch_possible should be set by the driver if it can + * guarantee that frequency can be changed on any CPU sharing the + * policy and that the change will affect all of the policy CPUs then. + * - fast_switch_enabled is to be set by governors that support fast + * freqnency switching with the help of cpufreq_enable_fast_switch(). + */ + bool fast_switch_possible; + bool fast_switch_enabled; + /* Synchronization for frequency transitions */ bool transition_ongoing; /* Tracks transition status */ spinlock_t transition_lock; @@ -156,6 +167,8 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); bool have_governor_per_policy(void); struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy); +void cpufreq_enable_fast_switch(struct cpufreq_policy *policy); +void cpufreq_disable_fast_switch(struct cpufreq_policy *policy); #else static inline unsigned int cpufreq_get(unsigned int cpu) { @@ -236,6 +249,8 @@ struct cpufreq_driver { unsigned int relation); /* Deprecated */ int (*target_index)(struct cpufreq_policy *policy, unsigned int index); + unsigned int (*fast_switch)(struct cpufreq_policy *policy, + unsigned int target_freq); /* * Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION * unset. @@ -426,6 +441,20 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div, #define CPUFREQ_POLICY_POWERSAVE (1) #define CPUFREQ_POLICY_PERFORMANCE (2) +/* + * The polling frequency depends on the capability of the processor. Default + * polling frequency is 1000 times the transition latency of the processor. The + * ondemand governor will work on any processor with transition latency <= 10ms, + * using appropriate sampling rate. + * + * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL) + * the ondemand governor will not work. All times here are in us (microseconds). + */ +#define MIN_SAMPLING_RATE_RATIO (2) +#define LATENCY_MULTIPLIER (1000) +#define MIN_LATENCY_MULTIPLIER (20) +#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000) + /* Governor Events */ #define CPUFREQ_GOV_START 1 #define CPUFREQ_GOV_STOP 2 @@ -450,6 +479,8 @@ struct cpufreq_governor { }; /* Pass a target to the cpufreq driver */ +unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq); int cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); @@ -462,6 +493,29 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor); struct cpufreq_governor *cpufreq_default_governor(void); struct cpufreq_governor *cpufreq_fallback_governor(void); +/* Governor attribute set */ +struct gov_attr_set { + struct kobject kobj; + struct list_head policy_list; + struct mutex update_lock; + int usage_count; +}; + +/* sysfs ops for cpufreq governors */ +extern const struct sysfs_ops governor_sysfs_ops; + +void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node); +void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node); +unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node); + +/* Governor sysfs attribute */ +struct governor_attr { + struct attribute attr; + ssize_t (*show)(struct gov_attr_set *attr_set, char *buf); + ssize_t (*store)(struct gov_attr_set *attr_set, const char *buf, + size_t count); +}; + /********************************************************************* * FREQUENCY TABLE HELPERS * *********************************************************************/ diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 6fa02a20eb633..2de4e2eea180d 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -19,6 +19,13 @@ #define DEVFREQ_NAME_LEN 16 +/* DEVFREQ notifier interface */ +#define DEVFREQ_TRANSITION_NOTIFIER (0) + +/* Transition notifiers of DEVFREQ_TRANSITION_NOTIFIER */ +#define DEVFREQ_PRECHANGE (0) +#define DEVFREQ_POSTCHANGE (1) + struct devfreq; /** @@ -143,6 +150,7 @@ struct devfreq_governor { * @trans_table: Statistics of devfreq transitions * @time_in_state: Statistics of devfreq states * @last_stat_updated: The last time stat updated + * @transition_notifier_list: list head of DEVFREQ_TRANSITION_NOTIFIER notifier * * This structure stores the devfreq information for a give device. * @@ -177,6 +185,13 @@ struct devfreq { unsigned int *trans_table; unsigned long *time_in_state; unsigned long last_stat_updated; + + struct srcu_notifier_head transition_notifier_list; +}; + +struct devfreq_freqs { + unsigned long old; + unsigned long new; }; #if defined(CONFIG_PM_DEVFREQ) @@ -207,6 +222,22 @@ extern int devm_devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq); extern void devm_devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq); +extern int devfreq_register_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list); +extern int devfreq_unregister_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list); +extern int devm_devfreq_register_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list); +extern void devm_devfreq_unregister_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list); +extern struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, + int index); /** * devfreq_update_stats() - update the last_status pointer in struct devfreq @@ -241,6 +272,39 @@ struct devfreq_simple_ondemand_data { }; #endif +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) +/** + * struct devfreq_passive_data - void *data fed to struct devfreq + * and devfreq_add_device + * @parent: the devfreq instance of parent device. + * @get_target_freq: Optional callback, Returns desired operating frequency + * for the device using passive governor. That is called + * when passive governor should decide the next frequency + * by using the new frequency of parent devfreq device + * using governors except for passive governor. + * If the devfreq device has the specific method to decide + * the next frequency, should use this callback. + * @this: the devfreq instance of own device. + * @nb: the notifier block for DEVFREQ_TRANSITION_NOTIFIER list + * + * The devfreq_passive_data have to set the devfreq instance of parent + * device with governors except for the passive governor. But, don't need to + * initialize the 'this' and 'nb' field because the devfreq core will handle + * them. + */ +struct devfreq_passive_data { + /* Should set the devfreq instance of parent device */ + struct devfreq *parent; + + /* Optional callback to decide the next frequency of passvice device */ + int (*get_target_freq)(struct devfreq *this, unsigned long *freq); + + /* For passive governor's internal use. Don't need to set them */ + struct devfreq *this; + struct notifier_block nb; +}; +#endif + #else /* !CONFIG_PM_DEVFREQ */ static inline struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, @@ -307,6 +371,41 @@ static inline void devm_devfreq_unregister_opp_notifier(struct device *dev, { } +static inline int devfreq_register_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + return 0; +} + +static inline int devfreq_unregister_notifier(struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + return 0; +} + +static inline int devm_devfreq_register_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ + return 0; +} + +static inline void devm_devfreq_unregister_notifier(struct device *dev, + struct devfreq *devfreq, + struct notifier_block *nb, + unsigned int list) +{ +} + +static inline struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, + int index) +{ + return ERR_PTR(-ENODEV); +} + static inline int devfreq_update_stats(struct devfreq *df) { return -EINVAL; diff --git a/include/linux/device.h b/include/linux/device.h index 002c59728dbe6..b130304f9b1bb 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -956,11 +956,6 @@ static inline bool device_async_suspend_enabled(struct device *dev) return !!dev->power.async_suspend; } -static inline void pm_suspend_ignore_children(struct device *dev, bool enable) -{ - dev->power.ignore_children = enable; -} - static inline void dev_pm_syscore_device(struct device *dev, bool val) { #ifdef CONFIG_PM_SLEEP diff --git a/include/linux/pm.h b/include/linux/pm.h index 6a5d654f44472..06eb353182abe 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -563,7 +563,6 @@ struct dev_pm_info { bool is_suspended:1; /* Ditto */ bool is_noirq_suspended:1; bool is_late_suspended:1; - bool ignore_children:1; bool early_init:1; /* Owned by the PM core */ bool direct_complete:1; /* Owned by the PM core */ spinlock_t lock; @@ -591,6 +590,7 @@ struct dev_pm_info { unsigned int deferred_resume:1; unsigned int run_wake:1; unsigned int runtime_auto:1; + bool ignore_children:1; unsigned int no_callbacks:1; unsigned int irq_safe:1; unsigned int use_autosuspend:1; diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 49cd8890b8734..39285c7bd3f5c 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -28,14 +28,12 @@ enum gpd_status { struct dev_power_governor { bool (*power_down_ok)(struct dev_pm_domain *domain); - bool (*stop_ok)(struct device *dev); + bool (*suspend_ok)(struct device *dev); }; struct gpd_dev_ops { int (*start)(struct device *dev); int (*stop)(struct device *dev); - int (*save_state)(struct device *dev); - int (*restore_state)(struct device *dev); bool (*active_wakeup)(struct device *dev); }; @@ -94,7 +92,7 @@ struct gpd_timing_data { s64 resume_latency_ns; s64 effective_constraint_ns; bool constraint_changed; - bool cached_stop_ok; + bool cached_suspend_ok; }; struct pm_domain_data { diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index cccaf4a29e9f0..bca26157f5b69 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -65,6 +65,10 @@ void dev_pm_opp_put_prop_name(struct device *dev); int dev_pm_opp_set_regulator(struct device *dev, const char *name); void dev_pm_opp_put_regulator(struct device *dev); int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); +int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask); +int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask); +void dev_pm_opp_remove_table(struct device *dev); +void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask); #else static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) { @@ -109,25 +113,25 @@ static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev) static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, bool available) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, unsigned long *freq) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, unsigned long *freq) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } static inline int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) { - return -EINVAL; + return -ENOTSUPP; } static inline void dev_pm_opp_remove(struct device *dev, unsigned long freq) @@ -147,73 +151,85 @@ static inline int dev_pm_opp_disable(struct device *dev, unsigned long freq) static inline struct srcu_notifier_head *dev_pm_opp_get_notifier( struct device *dev) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } static inline int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count) { - return -EINVAL; + return -ENOTSUPP; } static inline void dev_pm_opp_put_supported_hw(struct device *dev) {} static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name) { - return -EINVAL; + return -ENOTSUPP; } static inline void dev_pm_opp_put_prop_name(struct device *dev) {} static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name) { - return -EINVAL; + return -ENOTSUPP; } static inline void dev_pm_opp_put_regulator(struct device *dev) {} static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) { + return -ENOTSUPP; +} + +static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask) +{ + return -ENOTSUPP; +} + +static inline int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) +{ return -EINVAL; } +static inline void dev_pm_opp_remove_table(struct device *dev) +{ +} + +static inline void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask) +{ +} + #endif /* CONFIG_PM_OPP */ #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF) int dev_pm_opp_of_add_table(struct device *dev); void dev_pm_opp_of_remove_table(struct device *dev); -int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask); -void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask); -int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask); -int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask); +int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask); +void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask); +int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask); #else static inline int dev_pm_opp_of_add_table(struct device *dev) { - return -EINVAL; + return -ENOTSUPP; } static inline void dev_pm_opp_of_remove_table(struct device *dev) { } -static inline int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask) -{ - return -ENOSYS; -} - -static inline void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask) +static inline int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask) { + return -ENOTSUPP; } -static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) +static inline void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask) { - return -ENOSYS; } -static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) +static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { - return -ENOSYS; + return -ENOTSUPP; } #endif diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 7af093d6a4dd1..2e14d2667b6cb 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -56,6 +56,11 @@ extern void pm_runtime_update_max_time_suspended(struct device *dev, s64 delta_ns); extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable); +static inline void pm_suspend_ignore_children(struct device *dev, bool enable) +{ + dev->power.ignore_children = enable; +} + static inline bool pm_children_suspended(struct device *dev) { return dev->power.ignore_children @@ -156,6 +161,7 @@ static inline void __pm_runtime_disable(struct device *dev, bool c) {} static inline void pm_runtime_allow(struct device *dev) {} static inline void pm_runtime_forbid(struct device *dev) {} +static inline void pm_suspend_ignore_children(struct device *dev, bool enable) {} static inline bool pm_children_suspended(struct device *dev) { return false; } static inline void pm_runtime_get_noresume(struct device *dev) {} static inline void pm_runtime_put_noidle(struct device *dev) {} diff --git a/include/linux/sched.h b/include/linux/sched.h index 6cc0df970f1ad..31bd0d97d1787 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -3351,7 +3351,10 @@ struct update_util_data { u64 time, unsigned long util, unsigned long max); }; -void cpufreq_set_update_util_data(int cpu, struct update_util_data *data); +void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data, + void (*func)(struct update_util_data *data, u64 time, + unsigned long util, unsigned long max)); +void cpufreq_remove_update_util_hook(int cpu); #endif /* CONFIG_CPU_FREQ */ #endif diff --git a/kernel/sched/Makefile b/kernel/sched/Makefile index 414d9c16da421..5e59b832ae2b4 100644 --- a/kernel/sched/Makefile +++ b/kernel/sched/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_SCHEDSTATS) += stats.o obj-$(CONFIG_SCHED_DEBUG) += debug.o obj-$(CONFIG_CGROUP_CPUACCT) += cpuacct.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o diff --git a/kernel/sched/cpufreq.c b/kernel/sched/cpufreq.c index 928c4ba32f683..1141954e73b46 100644 --- a/kernel/sched/cpufreq.c +++ b/kernel/sched/cpufreq.c @@ -14,24 +14,50 @@ DEFINE_PER_CPU(struct update_util_data *, cpufreq_update_util_data); /** - * cpufreq_set_update_util_data - Populate the CPU's update_util_data pointer. + * cpufreq_add_update_util_hook - Populate the CPU's update_util_data pointer. * @cpu: The CPU to set the pointer for. * @data: New pointer value. + * @func: Callback function to set for the CPU. * - * Set and publish the update_util_data pointer for the given CPU. That pointer - * points to a struct update_util_data object containing a callback function - * to call from cpufreq_update_util(). That function will be called from an RCU - * read-side critical section, so it must not sleep. + * Set and publish the update_util_data pointer for the given CPU. * - * Callers must use RCU-sched callbacks to free any memory that might be - * accessed via the old update_util_data pointer or invoke synchronize_sched() - * right after this function to avoid use-after-free. + * The update_util_data pointer of @cpu is set to @data and the callback + * function pointer in the target struct update_util_data is set to @func. + * That function will be called by cpufreq_update_util() from RCU-sched + * read-side critical sections, so it must not sleep. @data will always be + * passed to it as the first argument which allows the function to get to the + * target update_util_data structure and its container. + * + * The update_util_data pointer of @cpu must be NULL when this function is + * called or it will WARN() and return with no effect. */ -void cpufreq_set_update_util_data(int cpu, struct update_util_data *data) +void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data, + void (*func)(struct update_util_data *data, u64 time, + unsigned long util, unsigned long max)) { - if (WARN_ON(data && !data->func)) + if (WARN_ON(!data || !func)) return; + if (WARN_ON(per_cpu(cpufreq_update_util_data, cpu))) + return; + + data->func = func; rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), data); } -EXPORT_SYMBOL_GPL(cpufreq_set_update_util_data); +EXPORT_SYMBOL_GPL(cpufreq_add_update_util_hook); + +/** + * cpufreq_remove_update_util_hook - Clear the CPU's update_util_data pointer. + * @cpu: The CPU to clear the pointer for. + * + * Clear the update_util_data pointer for the given CPU. + * + * Callers must use RCU-sched callbacks to free any memory that might be + * accessed via the old update_util_data pointer or invoke synchronize_sched() + * right after this function to avoid use-after-free. + */ +void cpufreq_remove_update_util_hook(int cpu) +{ + rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), NULL); +} +EXPORT_SYMBOL_GPL(cpufreq_remove_update_util_hook); diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c new file mode 100644 index 0000000000000..154ae3a51e866 --- /dev/null +++ b/kernel/sched/cpufreq_schedutil.c @@ -0,0 +1,530 @@ +/* + * CPUFreq governor based on scheduler-provided CPU utilization data. + * + * Copyright (C) 2016, Intel Corporation + * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <trace/events/power.h> + +#include "sched.h" + +struct sugov_tunables { + struct gov_attr_set attr_set; + unsigned int rate_limit_us; +}; + +struct sugov_policy { + struct cpufreq_policy *policy; + + struct sugov_tunables *tunables; + struct list_head tunables_hook; + + raw_spinlock_t update_lock; /* For shared policies */ + u64 last_freq_update_time; + s64 freq_update_delay_ns; + unsigned int next_freq; + + /* The next fields are only needed if fast switch cannot be used. */ + struct irq_work irq_work; + struct work_struct work; + struct mutex work_lock; + bool work_in_progress; + + bool need_freq_update; +}; + +struct sugov_cpu { + struct update_util_data update_util; + struct sugov_policy *sg_policy; + + /* The fields below are only needed when sharing a policy. */ + unsigned long util; + unsigned long max; + u64 last_update; +}; + +static DEFINE_PER_CPU(struct sugov_cpu, sugov_cpu); + +/************************ Governor internals ***********************/ + +static bool sugov_should_update_freq(struct sugov_policy *sg_policy, u64 time) +{ + s64 delta_ns; + + if (sg_policy->work_in_progress) + return false; + + if (unlikely(sg_policy->need_freq_update)) { + sg_policy->need_freq_update = false; + /* + * This happens when limits change, so forget the previous + * next_freq value and force an update. + */ + sg_policy->next_freq = UINT_MAX; + return true; + } + + delta_ns = time - sg_policy->last_freq_update_time; + return delta_ns >= sg_policy->freq_update_delay_ns; +} + +static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time, + unsigned int next_freq) +{ + struct cpufreq_policy *policy = sg_policy->policy; + + sg_policy->last_freq_update_time = time; + + if (policy->fast_switch_enabled) { + if (sg_policy->next_freq == next_freq) { + trace_cpu_frequency(policy->cur, smp_processor_id()); + return; + } + sg_policy->next_freq = next_freq; + next_freq = cpufreq_driver_fast_switch(policy, next_freq); + if (next_freq == CPUFREQ_ENTRY_INVALID) + return; + + policy->cur = next_freq; + trace_cpu_frequency(next_freq, smp_processor_id()); + } else if (sg_policy->next_freq != next_freq) { + sg_policy->next_freq = next_freq; + sg_policy->work_in_progress = true; + irq_work_queue(&sg_policy->irq_work); + } +} + +/** + * get_next_freq - Compute a new frequency for a given cpufreq policy. + * @policy: cpufreq policy object to compute the new frequency for. + * @util: Current CPU utilization. + * @max: CPU capacity. + * + * If the utilization is frequency-invariant, choose the new frequency to be + * proportional to it, that is + * + * next_freq = C * max_freq * util / max + * + * Otherwise, approximate the would-be frequency-invariant utilization by + * util_raw * (curr_freq / max_freq) which leads to + * + * next_freq = C * curr_freq * util_raw / max + * + * Take C = 1.25 for the frequency tipping point at (util / max) = 0.8. + */ +static unsigned int get_next_freq(struct cpufreq_policy *policy, + unsigned long util, unsigned long max) +{ + unsigned int freq = arch_scale_freq_invariant() ? + policy->cpuinfo.max_freq : policy->cur; + + return (freq + (freq >> 2)) * util / max; +} + +static void sugov_update_single(struct update_util_data *hook, u64 time, + unsigned long util, unsigned long max) +{ + struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util); + struct sugov_policy *sg_policy = sg_cpu->sg_policy; + struct cpufreq_policy *policy = sg_policy->policy; + unsigned int next_f; + + if (!sugov_should_update_freq(sg_policy, time)) + return; + + next_f = util == ULONG_MAX ? policy->cpuinfo.max_freq : + get_next_freq(policy, util, max); + sugov_update_commit(sg_policy, time, next_f); +} + +static unsigned int sugov_next_freq_shared(struct sugov_policy *sg_policy, + unsigned long util, unsigned long max) +{ + struct cpufreq_policy *policy = sg_policy->policy; + unsigned int max_f = policy->cpuinfo.max_freq; + u64 last_freq_update_time = sg_policy->last_freq_update_time; + unsigned int j; + + if (util == ULONG_MAX) + return max_f; + + for_each_cpu(j, policy->cpus) { + struct sugov_cpu *j_sg_cpu; + unsigned long j_util, j_max; + s64 delta_ns; + + if (j == smp_processor_id()) + continue; + + j_sg_cpu = &per_cpu(sugov_cpu, j); + /* + * If the CPU utilization was last updated before the previous + * frequency update and the time elapsed between the last update + * of the CPU utilization and the last frequency update is long + * enough, don't take the CPU into account as it probably is + * idle now. + */ + delta_ns = last_freq_update_time - j_sg_cpu->last_update; + if (delta_ns > TICK_NSEC) + continue; + + j_util = j_sg_cpu->util; + if (j_util == ULONG_MAX) + return max_f; + + j_max = j_sg_cpu->max; + if (j_util * max > j_max * util) { + util = j_util; + max = j_max; + } + } + + return get_next_freq(policy, util, max); +} + +static void sugov_update_shared(struct update_util_data *hook, u64 time, + unsigned long util, unsigned long max) +{ + struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util); + struct sugov_policy *sg_policy = sg_cpu->sg_policy; + unsigned int next_f; + + raw_spin_lock(&sg_policy->update_lock); + + sg_cpu->util = util; + sg_cpu->max = max; + sg_cpu->last_update = time; + + if (sugov_should_update_freq(sg_policy, time)) { + next_f = sugov_next_freq_shared(sg_policy, util, max); + sugov_update_commit(sg_policy, time, next_f); + } + + raw_spin_unlock(&sg_policy->update_lock); +} + +static void sugov_work(struct work_struct *work) +{ + struct sugov_policy *sg_policy = container_of(work, struct sugov_policy, work); + + mutex_lock(&sg_policy->work_lock); + __cpufreq_driver_target(sg_policy->policy, sg_policy->next_freq, + CPUFREQ_RELATION_L); + mutex_unlock(&sg_policy->work_lock); + + sg_policy->work_in_progress = false; +} + +static void sugov_irq_work(struct irq_work *irq_work) +{ + struct sugov_policy *sg_policy; + + sg_policy = container_of(irq_work, struct sugov_policy, irq_work); + schedule_work_on(smp_processor_id(), &sg_policy->work); +} + +/************************** sysfs interface ************************/ + +static struct sugov_tunables *global_tunables; +static DEFINE_MUTEX(global_tunables_lock); + +static inline struct sugov_tunables *to_sugov_tunables(struct gov_attr_set *attr_set) +{ + return container_of(attr_set, struct sugov_tunables, attr_set); +} + +static ssize_t rate_limit_us_show(struct gov_attr_set *attr_set, char *buf) +{ + struct sugov_tunables *tunables = to_sugov_tunables(attr_set); + + return sprintf(buf, "%u\n", tunables->rate_limit_us); +} + +static ssize_t rate_limit_us_store(struct gov_attr_set *attr_set, const char *buf, + size_t count) +{ + struct sugov_tunables *tunables = to_sugov_tunables(attr_set); + struct sugov_policy *sg_policy; + unsigned int rate_limit_us; + + if (kstrtouint(buf, 10, &rate_limit_us)) + return -EINVAL; + + tunables->rate_limit_us = rate_limit_us; + + list_for_each_entry(sg_policy, &attr_set->policy_list, tunables_hook) + sg_policy->freq_update_delay_ns = rate_limit_us * NSEC_PER_USEC; + + return count; +} + +static struct governor_attr rate_limit_us = __ATTR_RW(rate_limit_us); + +static struct attribute *sugov_attributes[] = { + &rate_limit_us.attr, + NULL +}; + +static struct kobj_type sugov_tunables_ktype = { + .default_attrs = sugov_attributes, + .sysfs_ops = &governor_sysfs_ops, +}; + +/********************** cpufreq governor interface *********************/ + +static struct cpufreq_governor schedutil_gov; + +static struct sugov_policy *sugov_policy_alloc(struct cpufreq_policy *policy) +{ + struct sugov_policy *sg_policy; + + sg_policy = kzalloc(sizeof(*sg_policy), GFP_KERNEL); + if (!sg_policy) + return NULL; + + sg_policy->policy = policy; + init_irq_work(&sg_policy->irq_work, sugov_irq_work); + INIT_WORK(&sg_policy->work, sugov_work); + mutex_init(&sg_policy->work_lock); + raw_spin_lock_init(&sg_policy->update_lock); + return sg_policy; +} + +static void sugov_policy_free(struct sugov_policy *sg_policy) +{ + mutex_destroy(&sg_policy->work_lock); + kfree(sg_policy); +} + +static struct sugov_tunables *sugov_tunables_alloc(struct sugov_policy *sg_policy) +{ + struct sugov_tunables *tunables; + + tunables = kzalloc(sizeof(*tunables), GFP_KERNEL); + if (tunables) { + gov_attr_set_init(&tunables->attr_set, &sg_policy->tunables_hook); + if (!have_governor_per_policy()) + global_tunables = tunables; + } + return tunables; +} + +static void sugov_tunables_free(struct sugov_tunables *tunables) +{ + if (!have_governor_per_policy()) + global_tunables = NULL; + + kfree(tunables); +} + +static int sugov_init(struct cpufreq_policy *policy) +{ + struct sugov_policy *sg_policy; + struct sugov_tunables *tunables; + unsigned int lat; + int ret = 0; + + /* State should be equivalent to EXIT */ + if (policy->governor_data) + return -EBUSY; + + sg_policy = sugov_policy_alloc(policy); + if (!sg_policy) + return -ENOMEM; + + mutex_lock(&global_tunables_lock); + + if (global_tunables) { + if (WARN_ON(have_governor_per_policy())) { + ret = -EINVAL; + goto free_sg_policy; + } + policy->governor_data = sg_policy; + sg_policy->tunables = global_tunables; + + gov_attr_set_get(&global_tunables->attr_set, &sg_policy->tunables_hook); + goto out; + } + + tunables = sugov_tunables_alloc(sg_policy); + if (!tunables) { + ret = -ENOMEM; + goto free_sg_policy; + } + + tunables->rate_limit_us = LATENCY_MULTIPLIER; + lat = policy->cpuinfo.transition_latency / NSEC_PER_USEC; + if (lat) + tunables->rate_limit_us *= lat; + + policy->governor_data = sg_policy; + sg_policy->tunables = tunables; + + ret = kobject_init_and_add(&tunables->attr_set.kobj, &sugov_tunables_ktype, + get_governor_parent_kobj(policy), "%s", + schedutil_gov.name); + if (ret) + goto fail; + + out: + mutex_unlock(&global_tunables_lock); + + cpufreq_enable_fast_switch(policy); + return 0; + + fail: + policy->governor_data = NULL; + sugov_tunables_free(tunables); + + free_sg_policy: + mutex_unlock(&global_tunables_lock); + + sugov_policy_free(sg_policy); + pr_err("cpufreq: schedutil governor initialization failed (error %d)\n", ret); + return ret; +} + +static int sugov_exit(struct cpufreq_policy *policy) +{ + struct sugov_policy *sg_policy = policy->governor_data; + struct sugov_tunables *tunables = sg_policy->tunables; + unsigned int count; + + cpufreq_disable_fast_switch(policy); + + mutex_lock(&global_tunables_lock); + + count = gov_attr_set_put(&tunables->attr_set, &sg_policy->tunables_hook); + policy->governor_data = NULL; + if (!count) + sugov_tunables_free(tunables); + + mutex_unlock(&global_tunables_lock); + + sugov_policy_free(sg_policy); + return 0; +} + +static int sugov_start(struct cpufreq_policy *policy) +{ + struct sugov_policy *sg_policy = policy->governor_data; + unsigned int cpu; + + sg_policy->freq_update_delay_ns = sg_policy->tunables->rate_limit_us * NSEC_PER_USEC; + sg_policy->last_freq_update_time = 0; + sg_policy->next_freq = UINT_MAX; + sg_policy->work_in_progress = false; + sg_policy->need_freq_update = false; + + for_each_cpu(cpu, policy->cpus) { + struct sugov_cpu *sg_cpu = &per_cpu(sugov_cpu, cpu); + + sg_cpu->sg_policy = sg_policy; + if (policy_is_shared(policy)) { + sg_cpu->util = ULONG_MAX; + sg_cpu->max = 0; + sg_cpu->last_update = 0; + cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util, + sugov_update_shared); + } else { + cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util, + sugov_update_single); + } + } + return 0; +} + +static int sugov_stop(struct cpufreq_policy *policy) +{ + struct sugov_policy *sg_policy = policy->governor_data; + unsigned int cpu; + + for_each_cpu(cpu, policy->cpus) + cpufreq_remove_update_util_hook(cpu); + + synchronize_sched(); + + irq_work_sync(&sg_policy->irq_work); + cancel_work_sync(&sg_policy->work); + return 0; +} + +static int sugov_limits(struct cpufreq_policy *policy) +{ + struct sugov_policy *sg_policy = policy->governor_data; + + if (!policy->fast_switch_enabled) { + mutex_lock(&sg_policy->work_lock); + + if (policy->max < policy->cur) + __cpufreq_driver_target(policy, policy->max, + CPUFREQ_RELATION_H); + else if (policy->min > policy->cur) + __cpufreq_driver_target(policy, policy->min, + CPUFREQ_RELATION_L); + + mutex_unlock(&sg_policy->work_lock); + } + + sg_policy->need_freq_update = true; + return 0; +} + +int sugov_governor(struct cpufreq_policy *policy, unsigned int event) +{ + if (event == CPUFREQ_GOV_POLICY_INIT) { + return sugov_init(policy); + } else if (policy->governor_data) { + switch (event) { + case CPUFREQ_GOV_POLICY_EXIT: + return sugov_exit(policy); + case CPUFREQ_GOV_START: + return sugov_start(policy); + case CPUFREQ_GOV_STOP: + return sugov_stop(policy); + case CPUFREQ_GOV_LIMITS: + return sugov_limits(policy); + } + } + return -EINVAL; +} + +static struct cpufreq_governor schedutil_gov = { + .name = "schedutil", + .governor = sugov_governor, + .owner = THIS_MODULE, +}; + +static int __init sugov_module_init(void) +{ + return cpufreq_register_governor(&schedutil_gov); +} + +static void __exit sugov_module_exit(void) +{ + cpufreq_unregister_governor(&schedutil_gov); +} + +MODULE_AUTHOR("Rafael J. Wysocki <rafael.j.wysocki@intel.com>"); +MODULE_DESCRIPTION("Utilization-based CPU frequency selection"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL +struct cpufreq_governor *cpufreq_default_governor(void) +{ + return &schedutil_gov; +} + +fs_initcall(sugov_module_init); +#else +module_init(sugov_module_init); +#endif +module_exit(sugov_module_exit); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index e51145e768075..72f1f3087b04a 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -1802,6 +1802,14 @@ static inline void cpufreq_update_util(u64 time, unsigned long util, unsigned lo static inline void cpufreq_trigger_update(u64 time) {} #endif /* CONFIG_CPU_FREQ */ +#ifdef arch_scale_freq_capacity +#ifndef arch_scale_freq_invariant +#define arch_scale_freq_invariant() (true) +#endif +#else /* arch_scale_freq_capacity */ +#define arch_scale_freq_invariant() (false) +#endif + static inline void account_reset_rq(struct rq *rq) { #ifdef CONFIG_IRQ_TIME_ACCOUNTING diff --git a/kernel/trace/power-traces.c b/kernel/trace/power-traces.c index 81b87451c0ea1..0c7dee221dca4 100644 --- a/kernel/trace/power-traces.c +++ b/kernel/trace/power-traces.c @@ -15,5 +15,6 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(suspend_resume); EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_idle); +EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_frequency); EXPORT_TRACEPOINT_SYMBOL_GPL(powernv_throttle); diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile index 0adaf0c7c03a0..8358863259c53 100644 --- a/tools/power/cpupower/Makefile +++ b/tools/power/cpupower/Makefile @@ -63,7 +63,7 @@ DESTDIR ?= # and _should_ modify the PACKAGE_BUGREPORT definition VERSION= $(shell ./utils/version-gen.sh) -LIB_MAJ= 0.0.0 +LIB_MAJ= 0.0.1 LIB_MIN= 0 PACKAGE = cpupower @@ -129,7 +129,7 @@ WARNINGS += -Wshadow CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \ -DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE -UTIL_OBJS = utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \ +UTIL_OBJS = utils/helpers/amd.o utils/helpers/msr.o \ utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \ utils/helpers/pci.o utils/helpers/bitmask.o \ utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \ @@ -148,9 +148,9 @@ UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \ utils/helpers/bitmask.h \ utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def -LIB_HEADERS = lib/cpufreq.h lib/sysfs.h -LIB_SRC = lib/cpufreq.c lib/sysfs.c -LIB_OBJS = lib/cpufreq.o lib/sysfs.o +LIB_HEADERS = lib/cpufreq.h lib/cpupower.h lib/cpuidle.h +LIB_SRC = lib/cpufreq.c lib/cpupower.c lib/cpuidle.c +LIB_OBJS = lib/cpufreq.o lib/cpupower.o lib/cpuidle.o LIB_OBJS := $(addprefix $(OUTPUT),$(LIB_OBJS)) CFLAGS += -pipe @@ -280,6 +280,7 @@ install-lib: $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/ $(INSTALL) -d $(DESTDIR)${includedir} $(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h + $(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h install-tools: $(INSTALL) -d $(DESTDIR)${bindir} @@ -315,6 +316,7 @@ endif uninstall: - rm -f $(DESTDIR)${libdir}/libcpupower.* - rm -f $(DESTDIR)${includedir}/cpufreq.h + - rm -f $(DESTDIR)${includedir}/cpuidle.h - rm -f $(DESTDIR)${bindir}/utils/cpupower - rm -f $(DESTDIR)${mandir}/man1/cpupower.1 - rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1 diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile index d0f879b223fc2..3e59f1aa3947e 100644 --- a/tools/power/cpupower/bench/Makefile +++ b/tools/power/cpupower/bench/Makefile @@ -22,7 +22,7 @@ $(OUTPUT)%.o : %.c $(OUTPUT)cpufreq-bench: $(OBJS) $(ECHO) " CC " $@ - $(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS) + $(QUIET) $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) all: $(OUTPUT)cpufreq-bench diff --git a/tools/power/cpupower/bench/README-BENCH b/tools/power/cpupower/bench/README-BENCH index 8093ec738170f..97727aed61cca 100644 --- a/tools/power/cpupower/bench/README-BENCH +++ b/tools/power/cpupower/bench/README-BENCH @@ -113,7 +113,7 @@ cpufreq-bench Command Usage -c, --cpu=<unsigned int> CPU Number to use, starting at 0 -p, --prio=<priority> scheduler priority, HIGH, LOW or DEFAULT -g, --governor=<governor> cpufreq governor to test --n, --cycles=<int> load/sleep cycles to get an avarage value to compare +-n, --cycles=<int> load/sleep cycles to get an average value to compare -r, --rounds<int> load/sleep rounds -f, --file=<configfile> config file to use -o, --output=<dir> output dir, must exist diff --git a/tools/power/cpupower/bench/benchmark.c b/tools/power/cpupower/bench/benchmark.c index 81b1c48607d99..429d51ab8031f 100644 --- a/tools/power/cpupower/bench/benchmark.c +++ b/tools/power/cpupower/bench/benchmark.c @@ -130,7 +130,7 @@ void start_benchmark(struct config *config) _round, load_time, sleep_time); if (config->verbose) - printf("avarage: %lius, rps:%li\n", + printf("average: %lius, rps:%li\n", load_time / calculations, 1000000 * calculations / load_time); @@ -177,7 +177,7 @@ void start_benchmark(struct config *config) progress_time += sleep_time + load_time; - /* compare the avarage sleep/load cycles */ + /* compare the average sleep/load cycles */ fprintf(config->output, "%li ", powersave_time / config->cycles); fprintf(config->output, "%.3f\n", diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c index f503fb53824ed..9b65f052081f3 100644 --- a/tools/power/cpupower/bench/parse.c +++ b/tools/power/cpupower/bench/parse.c @@ -65,7 +65,7 @@ FILE *prepare_output(const char *dirname) { FILE *output = NULL; int len; - char *filename; + char *filename, *filename_tmp; struct utsname sysdata; DIR *dir; @@ -81,16 +81,22 @@ FILE *prepare_output(const char *dirname) len = strlen(dirname) + 30; filename = malloc(sizeof(char) * len); + if (!filename) { + perror("malloc"); + goto out_dir; + } if (uname(&sysdata) == 0) { len += strlen(sysdata.nodename) + strlen(sysdata.release); - filename = realloc(filename, sizeof(char) * len); + filename_tmp = realloc(filename, sizeof(*filename) * len); - if (filename == NULL) { + if (filename_tmp == NULL) { + free(filename); perror("realloc"); - return NULL; + goto out_dir; } + filename = filename_tmp; snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log", dirname, sysdata.nodename, sysdata.release, time(NULL)); } else { @@ -104,12 +110,16 @@ FILE *prepare_output(const char *dirname) if (output == NULL) { perror("fopen"); fprintf(stderr, "error: unable to open logfile\n"); + goto out; } fprintf(stdout, "Logfile: %s\n", filename); - free(filename); fprintf(output, "#round load sleep performance powersave percentage\n"); +out: + free(filename); +out_dir: + closedir(dir); return output; } diff --git a/tools/power/cpupower/bench/system.c b/tools/power/cpupower/bench/system.c index f01e3f4be84cd..c25a74ae51bae 100644 --- a/tools/power/cpupower/bench/system.c +++ b/tools/power/cpupower/bench/system.c @@ -26,6 +26,7 @@ #include <sched.h> #include <cpufreq.h> +#include <cpupower.h> #include "config.h" #include "system.h" @@ -60,7 +61,7 @@ int set_cpufreq_governor(char *governor, unsigned int cpu) dprintf("set %s as cpufreq governor\n", governor); - if (cpufreq_cpu_exists(cpu) != 0) { + if (cpupower_is_cpu_online(cpu) != 0) { perror("cpufreq_cpu_exists"); fprintf(stderr, "error: cpu %u does not exist\n", cpu); return -1; diff --git a/tools/power/cpupower/lib/cpufreq.c b/tools/power/cpupower/lib/cpufreq.c index d961101d1cea1..1b993fe1ce237 100644 --- a/tools/power/cpupower/lib/cpufreq.c +++ b/tools/power/cpupower/lib/cpufreq.c @@ -9,28 +9,190 @@ #include <errno.h> #include <stdlib.h> #include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> #include "cpufreq.h" -#include "sysfs.h" +#include "cpupower_intern.h" -int cpufreq_cpu_exists(unsigned int cpu) +/* CPUFREQ sysfs access **************************************************/ + +/* helper function to read file from /sys into given buffer */ +/* fname is a relative path under "cpuX/cpufreq" dir */ +static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname, + char *buf, size_t buflen) { - return sysfs_cpu_exists(cpu); + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", + cpu, fname); + return sysfs_read_file(path, buf, buflen); } +/* helper function to write a new value to a /sys file */ +/* fname is a relative path under "cpuX/cpufreq" dir */ +static unsigned int sysfs_cpufreq_write_file(unsigned int cpu, + const char *fname, + const char *value, size_t len) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numwrite; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", + cpu, fname); + + fd = open(path, O_WRONLY); + if (fd == -1) + return 0; + + numwrite = write(fd, value, len); + if (numwrite < 1) { + close(fd); + return 0; + } + + close(fd); + + return (unsigned int) numwrite; +} + +/* read access to files which contain one numeric value */ + +enum cpufreq_value { + CPUINFO_CUR_FREQ, + CPUINFO_MIN_FREQ, + CPUINFO_MAX_FREQ, + CPUINFO_LATENCY, + SCALING_CUR_FREQ, + SCALING_MIN_FREQ, + SCALING_MAX_FREQ, + STATS_NUM_TRANSITIONS, + MAX_CPUFREQ_VALUE_READ_FILES +}; + +static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = { + [CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq", + [CPUINFO_MIN_FREQ] = "cpuinfo_min_freq", + [CPUINFO_MAX_FREQ] = "cpuinfo_max_freq", + [CPUINFO_LATENCY] = "cpuinfo_transition_latency", + [SCALING_CUR_FREQ] = "scaling_cur_freq", + [SCALING_MIN_FREQ] = "scaling_min_freq", + [SCALING_MAX_FREQ] = "scaling_max_freq", + [STATS_NUM_TRANSITIONS] = "stats/total_trans" +}; + + +static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu, + enum cpufreq_value which) +{ + unsigned long value; + unsigned int len; + char linebuf[MAX_LINE_LEN]; + char *endp; + + if (which >= MAX_CPUFREQ_VALUE_READ_FILES) + return 0; + + len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which], + linebuf, sizeof(linebuf)); + + if (len == 0) + return 0; + + value = strtoul(linebuf, &endp, 0); + + if (endp == linebuf || errno == ERANGE) + return 0; + + return value; +} + +/* read access to files which contain one string */ + +enum cpufreq_string { + SCALING_DRIVER, + SCALING_GOVERNOR, + MAX_CPUFREQ_STRING_FILES +}; + +static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = { + [SCALING_DRIVER] = "scaling_driver", + [SCALING_GOVERNOR] = "scaling_governor", +}; + + +static char *sysfs_cpufreq_get_one_string(unsigned int cpu, + enum cpufreq_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_CPUFREQ_STRING_FILES) + return NULL; + + len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +/* write access */ + +enum cpufreq_write { + WRITE_SCALING_MIN_FREQ, + WRITE_SCALING_MAX_FREQ, + WRITE_SCALING_GOVERNOR, + WRITE_SCALING_SET_SPEED, + MAX_CPUFREQ_WRITE_FILES +}; + +static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = { + [WRITE_SCALING_MIN_FREQ] = "scaling_min_freq", + [WRITE_SCALING_MAX_FREQ] = "scaling_max_freq", + [WRITE_SCALING_GOVERNOR] = "scaling_governor", + [WRITE_SCALING_SET_SPEED] = "scaling_setspeed", +}; + +static int sysfs_cpufreq_write_one_value(unsigned int cpu, + enum cpufreq_write which, + const char *new_value, size_t len) +{ + if (which >= MAX_CPUFREQ_WRITE_FILES) + return 0; + + if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which], + new_value, len) != len) + return -ENODEV; + + return 0; +}; + unsigned long cpufreq_get_freq_kernel(unsigned int cpu) { - return sysfs_get_freq_kernel(cpu); + return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ); } unsigned long cpufreq_get_freq_hardware(unsigned int cpu) { - return sysfs_get_freq_hardware(cpu); + return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ); } unsigned long cpufreq_get_transition_latency(unsigned int cpu) { - return sysfs_get_freq_transition_latency(cpu); + return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY); } int cpufreq_get_hardware_limits(unsigned int cpu, @@ -39,12 +201,21 @@ int cpufreq_get_hardware_limits(unsigned int cpu, { if ((!min) || (!max)) return -EINVAL; - return sysfs_get_freq_hardware_limits(cpu, min, max); + + *min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ); + if (!*min) + return -ENODEV; + + *max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ); + if (!*max) + return -ENODEV; + + return 0; } char *cpufreq_get_driver(unsigned int cpu) { - return sysfs_get_freq_driver(cpu); + return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER); } void cpufreq_put_driver(char *ptr) @@ -56,7 +227,26 @@ void cpufreq_put_driver(char *ptr) struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu) { - return sysfs_get_freq_policy(cpu); + struct cpufreq_policy *policy; + + policy = malloc(sizeof(struct cpufreq_policy)); + if (!policy) + return NULL; + + policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR); + if (!policy->governor) { + free(policy); + return NULL; + } + policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); + policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ); + if ((!policy->min) || (!policy->max)) { + free(policy->governor); + free(policy); + return NULL; + } + + return policy; } void cpufreq_put_policy(struct cpufreq_policy *policy) @@ -72,7 +262,57 @@ void cpufreq_put_policy(struct cpufreq_policy *policy) struct cpufreq_available_governors *cpufreq_get_available_governors(unsigned int cpu) { - return sysfs_get_freq_available_governors(cpu); + struct cpufreq_available_governors *first = NULL; + struct cpufreq_available_governors *current = NULL; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + current->governor = malloc(i - pos + 1); + if (!current->governor) + goto error_out; + + memcpy(current->governor, linebuf + pos, i - pos); + current->governor[i - pos] = '\0'; + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + if (first->governor) + free(first->governor); + free(first); + first = current; + } + return NULL; } void cpufreq_put_available_governors(struct cpufreq_available_governors *any) @@ -96,7 +336,57 @@ void cpufreq_put_available_governors(struct cpufreq_available_governors *any) struct cpufreq_available_frequencies *cpufreq_get_available_frequencies(unsigned int cpu) { - return sysfs_get_available_frequencies(cpu); + struct cpufreq_available_frequencies *first = NULL; + struct cpufreq_available_frequencies *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if (i - pos >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + if (sscanf(one_value, "%lu", ¤t->frequency) != 1) + goto error_out; + + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; } void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies @@ -114,10 +404,65 @@ void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies } } +static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu, + const char *file) +{ + struct cpufreq_affected_cpus *first = NULL; + struct cpufreq_affected_cpus *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 1) + continue; + if (i - pos >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + + if (sscanf(one_value, "%u", ¤t->cpu) != 1) + goto error_out; + + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned int cpu) { - return sysfs_get_freq_affected_cpus(cpu); + return sysfs_get_cpu_list(cpu, "affected_cpus"); } void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any) @@ -138,7 +483,7 @@ void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any) struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned int cpu) { - return sysfs_get_freq_related_cpus(cpu); + return sysfs_get_cpu_list(cpu, "related_cpus"); } void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any) @@ -146,45 +491,208 @@ void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any) cpufreq_put_affected_cpus(any); } +static int verify_gov(char *new_gov, char *passed_gov) +{ + unsigned int i, j = 0; + + if (!passed_gov || (strlen(passed_gov) > 19)) + return -EINVAL; + + strncpy(new_gov, passed_gov, 20); + for (i = 0; i < 20; i++) { + if (j) { + new_gov[i] = '\0'; + continue; + } + if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z')) + continue; + + if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z')) + continue; + + if (new_gov[i] == '-') + continue; + + if (new_gov[i] == '_') + continue; + + if (new_gov[i] == '\0') { + j = 1; + continue; + } + return -EINVAL; + } + new_gov[19] = '\0'; + return 0; +} int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy) { + char min[SYSFS_PATH_MAX]; + char max[SYSFS_PATH_MAX]; + char gov[SYSFS_PATH_MAX]; + int ret; + unsigned long old_min; + int write_max_first; + if (!policy || !(policy->governor)) return -EINVAL; - return sysfs_set_freq_policy(cpu, policy); + if (policy->max < policy->min) + return -EINVAL; + + if (verify_gov(gov, policy->governor)) + return -EINVAL; + + snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min); + snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max); + + old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); + write_max_first = (old_min && (policy->max < old_min) ? 0 : 1); + + if (write_max_first) { + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + max, strlen(max)); + if (ret) + return ret; + } + + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min, + strlen(min)); + if (ret) + return ret; + + if (!write_max_first) { + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + max, strlen(max)); + if (ret) + return ret; + } + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, + gov, strlen(gov)); } int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq) { - return sysfs_modify_freq_policy_min(cpu, min_freq); + char value[SYSFS_PATH_MAX]; + + snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, + value, strlen(value)); } int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq) { - return sysfs_modify_freq_policy_max(cpu, max_freq); -} + char value[SYSFS_PATH_MAX]; + + snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq); + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + value, strlen(value)); +} int cpufreq_modify_policy_governor(unsigned int cpu, char *governor) { + char new_gov[SYSFS_PATH_MAX]; + if ((!governor) || (strlen(governor) > 19)) return -EINVAL; - return sysfs_modify_freq_policy_governor(cpu, governor); + if (verify_gov(new_gov, governor)) + return -EINVAL; + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, + new_gov, strlen(new_gov)); } int cpufreq_set_frequency(unsigned int cpu, unsigned long target_frequency) { - return sysfs_set_frequency(cpu, target_frequency); + struct cpufreq_policy *pol = cpufreq_get_policy(cpu); + char userspace_gov[] = "userspace"; + char freq[SYSFS_PATH_MAX]; + int ret; + + if (!pol) + return -ENODEV; + + if (strncmp(pol->governor, userspace_gov, 9) != 0) { + ret = cpufreq_modify_policy_governor(cpu, userspace_gov); + if (ret) { + cpufreq_put_policy(pol); + return ret; + } + } + + cpufreq_put_policy(pol); + + snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED, + freq, strlen(freq)); } struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu, unsigned long long *total_time) { - return sysfs_get_freq_stats(cpu, total_time); + struct cpufreq_stats *first = NULL; + struct cpufreq_stats *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + *total_time = 0; + pos = 0; + for (i = 0; i < len; i++) { + if (i == strlen(linebuf) || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if ((i - pos) >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + if (sscanf(one_value, "%lu %llu", + ¤t->frequency, + ¤t->time_in_state) != 2) + goto error_out; + + *total_time = *total_time + current->time_in_state; + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; } void cpufreq_put_stats(struct cpufreq_stats *any) @@ -204,5 +712,5 @@ void cpufreq_put_stats(struct cpufreq_stats *any) unsigned long cpufreq_get_transitions(unsigned int cpu) { - return sysfs_get_freq_transitions(cpu); + return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS); } diff --git a/tools/power/cpupower/lib/cpufreq.h b/tools/power/cpupower/lib/cpufreq.h index 3aae8e7a08394..3b005c39f068f 100644 --- a/tools/power/cpupower/lib/cpufreq.h +++ b/tools/power/cpupower/lib/cpufreq.h @@ -17,8 +17,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _CPUFREQ_H -#define _CPUFREQ_H 1 +#ifndef __CPUPOWER_CPUFREQ_H__ +#define __CPUPOWER_CPUFREQ_H__ struct cpufreq_policy { unsigned long min; @@ -58,13 +58,6 @@ struct cpufreq_stats { extern "C" { #endif -/* - * returns 0 if the specified CPU is present (it doesn't say - * whether it is online!), and an error value if not. - */ - -extern int cpufreq_cpu_exists(unsigned int cpu); - /* determine current CPU frequency * - _kernel variant means kernel's opinion of CPU frequency * - _hardware variant means actual hardware CPU frequency, @@ -73,9 +66,9 @@ extern int cpufreq_cpu_exists(unsigned int cpu); * returns 0 on failure, else frequency in kHz. */ -extern unsigned long cpufreq_get_freq_kernel(unsigned int cpu); +unsigned long cpufreq_get_freq_kernel(unsigned int cpu); -extern unsigned long cpufreq_get_freq_hardware(unsigned int cpu); +unsigned long cpufreq_get_freq_hardware(unsigned int cpu); #define cpufreq_get(cpu) cpufreq_get_freq_kernel(cpu); @@ -84,7 +77,7 @@ extern unsigned long cpufreq_get_freq_hardware(unsigned int cpu); * * returns 0 on failure, else transition latency in 10^(-9) s = nanoseconds */ -extern unsigned long cpufreq_get_transition_latency(unsigned int cpu); +unsigned long cpufreq_get_transition_latency(unsigned int cpu); /* determine hardware CPU frequency limits @@ -93,7 +86,7 @@ extern unsigned long cpufreq_get_transition_latency(unsigned int cpu); * considerations by cpufreq policy notifiers in the kernel. */ -extern int cpufreq_get_hardware_limits(unsigned int cpu, +int cpufreq_get_hardware_limits(unsigned int cpu, unsigned long *min, unsigned long *max); @@ -104,9 +97,9 @@ extern int cpufreq_get_hardware_limits(unsigned int cpu, * to avoid memory leakage, please. */ -extern char *cpufreq_get_driver(unsigned int cpu); +char *cpufreq_get_driver(unsigned int cpu); -extern void cpufreq_put_driver(char *ptr); +void cpufreq_put_driver(char *ptr); /* determine CPUfreq policy currently used @@ -116,9 +109,9 @@ extern void cpufreq_put_driver(char *ptr); */ -extern struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu); +struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu); -extern void cpufreq_put_policy(struct cpufreq_policy *policy); +void cpufreq_put_policy(struct cpufreq_policy *policy); /* determine CPUfreq governors currently available @@ -129,10 +122,10 @@ extern void cpufreq_put_policy(struct cpufreq_policy *policy); */ -extern struct cpufreq_available_governors +struct cpufreq_available_governors *cpufreq_get_available_governors(unsigned int cpu); -extern void cpufreq_put_available_governors( +void cpufreq_put_available_governors( struct cpufreq_available_governors *first); @@ -143,10 +136,10 @@ extern void cpufreq_put_available_governors( * cpufreq_put_available_frequencies after use. */ -extern struct cpufreq_available_frequencies +struct cpufreq_available_frequencies *cpufreq_get_available_frequencies(unsigned int cpu); -extern void cpufreq_put_available_frequencies( +void cpufreq_put_available_frequencies( struct cpufreq_available_frequencies *first); @@ -156,10 +149,10 @@ extern void cpufreq_put_available_frequencies( * to avoid memory leakage, please. */ -extern struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned +struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned int cpu); -extern void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first); +void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first); /* determine related CPUs @@ -168,10 +161,10 @@ extern void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first); * to avoid memory leakage, please. */ -extern struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned +struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned int cpu); -extern void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first); +void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first); /* determine stats for cpufreq subsystem @@ -179,12 +172,12 @@ extern void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first); * This is not available in all kernel versions or configurations. */ -extern struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu, +struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu, unsigned long long *total_time); -extern void cpufreq_put_stats(struct cpufreq_stats *stats); +void cpufreq_put_stats(struct cpufreq_stats *stats); -extern unsigned long cpufreq_get_transitions(unsigned int cpu); +unsigned long cpufreq_get_transitions(unsigned int cpu); /* set new cpufreq policy @@ -193,7 +186,7 @@ extern unsigned long cpufreq_get_transitions(unsigned int cpu); * but results may differ depending e.g. on governors being available. */ -extern int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy); +int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy); /* modify a policy by only changing min/max freq or governor @@ -201,9 +194,9 @@ extern int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy); * Does not check whether result is what was intended. */ -extern int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq); -extern int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq); -extern int cpufreq_modify_policy_governor(unsigned int cpu, char *governor); +int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq); +int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq); +int cpufreq_modify_policy_governor(unsigned int cpu, char *governor); /* set a specific frequency @@ -213,7 +206,7 @@ extern int cpufreq_modify_policy_governor(unsigned int cpu, char *governor); * occurs. Also does not work on ->range() cpufreq drivers. */ -extern int cpufreq_set_frequency(unsigned int cpu, +int cpufreq_set_frequency(unsigned int cpu, unsigned long target_frequency); #ifdef __cplusplus diff --git a/tools/power/cpupower/lib/cpuidle.c b/tools/power/cpupower/lib/cpuidle.c new file mode 100644 index 0000000000000..9bd4c7655fdb2 --- /dev/null +++ b/tools/power/cpupower/lib/cpuidle.c @@ -0,0 +1,380 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * (C) 2011 Thomas Renninger <trenn@novell.com> Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + */ + +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> + +#include "cpuidle.h" +#include "cpupower_intern.h" + +/* + * helper function to check whether a file under "../cpuX/cpuidle/stateX/" dir + * exists. + * For example the functionality to disable c-states was introduced in later + * kernel versions, this function can be used to explicitly check for this + * feature. + * + * returns 1 if the file exists, 0 otherwise. + */ +static +unsigned int cpuidle_state_file_exists(unsigned int cpu, + unsigned int idlestate, + const char *fname) +{ + char path[SYSFS_PATH_MAX]; + struct stat statbuf; + + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + if (stat(path, &statbuf) != 0) + return 0; + return 1; +} + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpuX/cpuidle/stateX/" dir + * cstates starting with 0, C0 is not counted as cstate. + * This means if you want C1 info, pass 0 as idlestate param + */ +static +unsigned int cpuidle_state_read_file(unsigned int cpu, + unsigned int idlestate, + const char *fname, char *buf, + size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +/* + * helper function to write a new value to a /sys file + * fname is a relative path under "../cpuX/cpuidle/cstateY/" dir + * + * Returns the number of bytes written or 0 on error + */ +static +unsigned int cpuidle_state_write_file(unsigned int cpu, + unsigned int idlestate, + const char *fname, + const char *value, size_t len) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numwrite; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + + fd = open(path, O_WRONLY); + if (fd == -1) + return 0; + + numwrite = write(fd, value, len); + if (numwrite < 1) { + close(fd); + return 0; + } + + close(fd); + + return (unsigned int) numwrite; +} + +/* read access to files which contain one numeric value */ + +enum idlestate_value { + IDLESTATE_USAGE, + IDLESTATE_POWER, + IDLESTATE_LATENCY, + IDLESTATE_TIME, + IDLESTATE_DISABLE, + MAX_IDLESTATE_VALUE_FILES +}; + +static const char *idlestate_value_files[MAX_IDLESTATE_VALUE_FILES] = { + [IDLESTATE_USAGE] = "usage", + [IDLESTATE_POWER] = "power", + [IDLESTATE_LATENCY] = "latency", + [IDLESTATE_TIME] = "time", + [IDLESTATE_DISABLE] = "disable", +}; + +static +unsigned long long cpuidle_state_get_one_value(unsigned int cpu, + unsigned int idlestate, + enum idlestate_value which) +{ + unsigned long long value; + unsigned int len; + char linebuf[MAX_LINE_LEN]; + char *endp; + + if (which >= MAX_IDLESTATE_VALUE_FILES) + return 0; + + len = cpuidle_state_read_file(cpu, idlestate, + idlestate_value_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return 0; + + value = strtoull(linebuf, &endp, 0); + + if (endp == linebuf || errno == ERANGE) + return 0; + + return value; +} + +/* read access to files which contain one string */ + +enum idlestate_string { + IDLESTATE_DESC, + IDLESTATE_NAME, + MAX_IDLESTATE_STRING_FILES +}; + +static const char *idlestate_string_files[MAX_IDLESTATE_STRING_FILES] = { + [IDLESTATE_DESC] = "desc", + [IDLESTATE_NAME] = "name", +}; + + +static char *cpuidle_state_get_one_string(unsigned int cpu, + unsigned int idlestate, + enum idlestate_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_IDLESTATE_STRING_FILES) + return NULL; + + len = cpuidle_state_read_file(cpu, idlestate, + idlestate_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +/* + * Returns: + * 1 if disabled + * 0 if enabled + * -1 if idlestate is not available + * -2 if disabling is not supported by the kernel + */ +int cpuidle_is_state_disabled(unsigned int cpu, + unsigned int idlestate) +{ + if (cpuidle_state_count(cpu) <= idlestate) + return -1; + + if (!cpuidle_state_file_exists(cpu, idlestate, + idlestate_value_files[IDLESTATE_DISABLE])) + return -2; + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_DISABLE); +} + +/* + * Pass 1 as last argument to disable or 0 to enable the state + * Returns: + * 0 on success + * negative values on error, for example: + * -1 if idlestate is not available + * -2 if disabling is not supported by the kernel + * -3 No write access to disable/enable C-states + */ +int cpuidle_state_disable(unsigned int cpu, + unsigned int idlestate, + unsigned int disable) +{ + char value[SYSFS_PATH_MAX]; + int bytes_written; + + if (cpuidle_state_count(cpu) <= idlestate) + return -1; + + if (!cpuidle_state_file_exists(cpu, idlestate, + idlestate_value_files[IDLESTATE_DISABLE])) + return -2; + + snprintf(value, SYSFS_PATH_MAX, "%u", disable); + + bytes_written = cpuidle_state_write_file(cpu, idlestate, "disable", + value, sizeof(disable)); + if (bytes_written) + return 0; + return -3; +} + +unsigned long cpuidle_state_latency(unsigned int cpu, + unsigned int idlestate) +{ + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_LATENCY); +} + +unsigned long cpuidle_state_usage(unsigned int cpu, + unsigned int idlestate) +{ + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_USAGE); +} + +unsigned long long cpuidle_state_time(unsigned int cpu, + unsigned int idlestate) +{ + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_TIME); +} + +char *cpuidle_state_name(unsigned int cpu, unsigned int idlestate) +{ + return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_NAME); +} + +char *cpuidle_state_desc(unsigned int cpu, unsigned int idlestate) +{ + return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_DESC); +} + +/* + * Returns number of supported C-states of CPU core cpu + * Negativ in error case + * Zero if cpuidle does not export any C-states + */ +unsigned int cpuidle_state_count(unsigned int cpu) +{ + char file[SYSFS_PATH_MAX]; + struct stat statbuf; + int idlestates = 1; + + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle"); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return 0; + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return 0; + + while (stat(file, &statbuf) == 0 && S_ISDIR(statbuf.st_mode)) { + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU + "cpu%u/cpuidle/state%d", cpu, idlestates); + idlestates++; + } + idlestates--; + return idlestates; +} + +/* CPUidle general /sys/devices/system/cpu/cpuidle/ sysfs access ********/ + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpu/cpuidle/" dir + */ +static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf, + size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname); + + return sysfs_read_file(path, buf, buflen); +} + + + +/* read access to files which contain one string */ + +enum cpuidle_string { + CPUIDLE_GOVERNOR, + CPUIDLE_GOVERNOR_RO, + CPUIDLE_DRIVER, + MAX_CPUIDLE_STRING_FILES +}; + +static const char *cpuidle_string_files[MAX_CPUIDLE_STRING_FILES] = { + [CPUIDLE_GOVERNOR] = "current_governor", + [CPUIDLE_GOVERNOR_RO] = "current_governor_ro", + [CPUIDLE_DRIVER] = "current_driver", +}; + + +static char *sysfs_cpuidle_get_one_string(enum cpuidle_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_CPUIDLE_STRING_FILES) + return NULL; + + len = sysfs_cpuidle_read_file(cpuidle_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +char *cpuidle_get_governor(void) +{ + char *tmp = sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR_RO); + if (!tmp) + return sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR); + else + return tmp; +} + +char *cpuidle_get_driver(void) +{ + return sysfs_cpuidle_get_one_string(CPUIDLE_DRIVER); +} +/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ diff --git a/tools/power/cpupower/lib/cpuidle.h b/tools/power/cpupower/lib/cpuidle.h new file mode 100644 index 0000000000000..04eb3cfa6e429 --- /dev/null +++ b/tools/power/cpupower/lib/cpuidle.h @@ -0,0 +1,23 @@ +#ifndef __CPUPOWER_CPUIDLE_H__ +#define __CPUPOWER_CPUIDLE_H__ + +int cpuidle_is_state_disabled(unsigned int cpu, + unsigned int idlestate); +int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate, + unsigned int disable); +unsigned long cpuidle_state_latency(unsigned int cpu, + unsigned int idlestate); +unsigned long cpuidle_state_usage(unsigned int cpu, + unsigned int idlestate); +unsigned long long cpuidle_state_time(unsigned int cpu, + unsigned int idlestate); +char *cpuidle_state_name(unsigned int cpu, + unsigned int idlestate); +char *cpuidle_state_desc(unsigned int cpu, + unsigned int idlestate); +unsigned int cpuidle_state_count(unsigned int cpu); + +char *cpuidle_get_governor(void); +char *cpuidle_get_driver(void); + +#endif /* __CPUPOWER_HELPERS_SYSFS_H__ */ diff --git a/tools/power/cpupower/lib/cpupower.c b/tools/power/cpupower/lib/cpupower.c new file mode 100644 index 0000000000000..9c395ec924def --- /dev/null +++ b/tools/power/cpupower/lib/cpupower.c @@ -0,0 +1,192 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Licensed under the terms of the GNU GPL License version 2. + */ + +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> + +#include "cpupower.h" +#include "cpupower_intern.h" + +unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen) +{ + int fd; + ssize_t numread; + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +/* + * Detect whether a CPU is online + * + * Returns: + * 1 -> if CPU is online + * 0 -> if CPU is offline + * negative errno values in error case + */ +int cpupower_is_cpu_online(unsigned int cpu) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + unsigned long long value; + char linebuf[MAX_LINE_LEN]; + char *endp; + struct stat statbuf; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu); + + if (stat(path, &statbuf) != 0) + return 0; + + /* + * kernel without CONFIG_HOTPLUG_CPU + * -> cpuX directory exists, but not cpuX/online file + */ + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu); + if (stat(path, &statbuf) != 0) + return 1; + + fd = open(path, O_RDONLY); + if (fd == -1) + return -errno; + + numread = read(fd, linebuf, MAX_LINE_LEN - 1); + if (numread < 1) { + close(fd); + return -EIO; + } + linebuf[numread] = '\0'; + close(fd); + + value = strtoull(linebuf, &endp, 0); + if (value > 1) + return -EINVAL; + + return value; +} + +/* returns -1 on failure, 0 on success */ +static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result) +{ + char linebuf[MAX_LINE_LEN]; + char *endp; + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s", + cpu, fname); + if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0) + return -1; + *result = strtol(linebuf, &endp, 0); + if (endp == linebuf || errno == ERANGE) + return -1; + return 0; +} + +static int __compare(const void *t1, const void *t2) +{ + struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1; + struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2; + if (top1->pkg < top2->pkg) + return -1; + else if (top1->pkg > top2->pkg) + return 1; + else if (top1->core < top2->core) + return -1; + else if (top1->core > top2->core) + return 1; + else if (top1->cpu < top2->cpu) + return -1; + else if (top1->cpu > top2->cpu) + return 1; + else + return 0; +} + +/* + * Returns amount of cpus, negative on error, cpu_top must be + * passed to cpu_topology_release to free resources + * + * Array is sorted after ->pkg, ->core, then ->cpu + */ +int get_cpu_topology(struct cpupower_topology *cpu_top) +{ + int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF); + + cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus); + if (cpu_top->core_info == NULL) + return -ENOMEM; + cpu_top->pkgs = cpu_top->cores = 0; + for (cpu = 0; cpu < cpus; cpu++) { + cpu_top->core_info[cpu].cpu = cpu; + cpu_top->core_info[cpu].is_online = cpupower_is_cpu_online(cpu); + if(sysfs_topology_read_file( + cpu, + "physical_package_id", + &(cpu_top->core_info[cpu].pkg)) < 0) { + cpu_top->core_info[cpu].pkg = -1; + cpu_top->core_info[cpu].core = -1; + continue; + } + if(sysfs_topology_read_file( + cpu, + "core_id", + &(cpu_top->core_info[cpu].core)) < 0) { + cpu_top->core_info[cpu].pkg = -1; + cpu_top->core_info[cpu].core = -1; + continue; + } + } + + qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info), + __compare); + + /* Count the number of distinct pkgs values. This works + because the primary sort of the core_info struct was just + done by pkg value. */ + last_pkg = cpu_top->core_info[0].pkg; + for(cpu = 1; cpu < cpus; cpu++) { + if (cpu_top->core_info[cpu].pkg != last_pkg && + cpu_top->core_info[cpu].pkg != -1) { + + last_pkg = cpu_top->core_info[cpu].pkg; + cpu_top->pkgs++; + } + } + if (!(cpu_top->core_info[0].pkg == -1)) + cpu_top->pkgs++; + + /* Intel's cores count is not consecutively numbered, there may + * be a core_id of 3, but none of 2. Assume there always is 0 + * Get amount of cores by counting duplicates in a package + for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) { + if (cpu_top->core_info[cpu].core == 0) + cpu_top->cores++; + */ + return cpus; +} + +void cpu_topology_release(struct cpupower_topology cpu_top) +{ + free(cpu_top.core_info); +} diff --git a/tools/power/cpupower/lib/cpupower.h b/tools/power/cpupower/lib/cpupower.h new file mode 100644 index 0000000000000..fa031fcc77108 --- /dev/null +++ b/tools/power/cpupower/lib/cpupower.h @@ -0,0 +1,35 @@ +#ifndef __CPUPOWER_CPUPOWER_H__ +#define __CPUPOWER_CPUPOWER_H__ + +struct cpupower_topology { + /* Amount of CPU cores, packages and threads per core in the system */ + unsigned int cores; + unsigned int pkgs; + unsigned int threads; /* per core */ + + /* Array gets mallocated with cores entries, holding per core info */ + struct cpuid_core_info *core_info; +}; + +struct cpuid_core_info { + int pkg; + int core; + int cpu; + + /* flags */ + unsigned int is_online:1; +}; + +#ifdef __cplusplus +extern "C" { +#endif + +int get_cpu_topology(struct cpupower_topology *cpu_top); +void cpu_topology_release(struct cpupower_topology cpu_top); +int cpupower_is_cpu_online(unsigned int cpu); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/tools/power/cpupower/lib/cpupower_intern.h b/tools/power/cpupower/lib/cpupower_intern.h new file mode 100644 index 0000000000000..f8ec4009621ca --- /dev/null +++ b/tools/power/cpupower/lib/cpupower_intern.h @@ -0,0 +1,5 @@ +#define PATH_TO_CPU "/sys/devices/system/cpu/" +#define MAX_LINE_LEN 4096 +#define SYSFS_PATH_MAX 255 + +unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen); diff --git a/tools/power/cpupower/lib/sysfs.c b/tools/power/cpupower/lib/sysfs.c deleted file mode 100644 index 870713a75a81c..0000000000000 --- a/tools/power/cpupower/lib/sysfs.c +++ /dev/null @@ -1,672 +0,0 @@ -/* - * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> - * - * Licensed under the terms of the GNU GPL License version 2. - */ - -#include <stdio.h> -#include <errno.h> -#include <stdlib.h> -#include <string.h> -#include <limits.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <unistd.h> - -#include "cpufreq.h" - -#define PATH_TO_CPU "/sys/devices/system/cpu/" -#define MAX_LINE_LEN 4096 -#define SYSFS_PATH_MAX 255 - - -static unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen) -{ - int fd; - ssize_t numread; - - fd = open(path, O_RDONLY); - if (fd == -1) - return 0; - - numread = read(fd, buf, buflen - 1); - if (numread < 1) { - close(fd); - return 0; - } - - buf[numread] = '\0'; - close(fd); - - return (unsigned int) numread; -} - - -/* CPUFREQ sysfs access **************************************************/ - -/* helper function to read file from /sys into given buffer */ -/* fname is a relative path under "cpuX/cpufreq" dir */ -static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname, - char *buf, size_t buflen) -{ - char path[SYSFS_PATH_MAX]; - - snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", - cpu, fname); - return sysfs_read_file(path, buf, buflen); -} - -/* helper function to write a new value to a /sys file */ -/* fname is a relative path under "cpuX/cpufreq" dir */ -static unsigned int sysfs_cpufreq_write_file(unsigned int cpu, - const char *fname, - const char *value, size_t len) -{ - char path[SYSFS_PATH_MAX]; - int fd; - ssize_t numwrite; - - snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", - cpu, fname); - - fd = open(path, O_WRONLY); - if (fd == -1) - return 0; - - numwrite = write(fd, value, len); - if (numwrite < 1) { - close(fd); - return 0; - } - - close(fd); - - return (unsigned int) numwrite; -} - -/* read access to files which contain one numeric value */ - -enum cpufreq_value { - CPUINFO_CUR_FREQ, - CPUINFO_MIN_FREQ, - CPUINFO_MAX_FREQ, - CPUINFO_LATENCY, - SCALING_CUR_FREQ, - SCALING_MIN_FREQ, - SCALING_MAX_FREQ, - STATS_NUM_TRANSITIONS, - MAX_CPUFREQ_VALUE_READ_FILES -}; - -static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = { - [CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq", - [CPUINFO_MIN_FREQ] = "cpuinfo_min_freq", - [CPUINFO_MAX_FREQ] = "cpuinfo_max_freq", - [CPUINFO_LATENCY] = "cpuinfo_transition_latency", - [SCALING_CUR_FREQ] = "scaling_cur_freq", - [SCALING_MIN_FREQ] = "scaling_min_freq", - [SCALING_MAX_FREQ] = "scaling_max_freq", - [STATS_NUM_TRANSITIONS] = "stats/total_trans" -}; - - -static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu, - enum cpufreq_value which) -{ - unsigned long value; - unsigned int len; - char linebuf[MAX_LINE_LEN]; - char *endp; - - if (which >= MAX_CPUFREQ_VALUE_READ_FILES) - return 0; - - len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which], - linebuf, sizeof(linebuf)); - - if (len == 0) - return 0; - - value = strtoul(linebuf, &endp, 0); - - if (endp == linebuf || errno == ERANGE) - return 0; - - return value; -} - -/* read access to files which contain one string */ - -enum cpufreq_string { - SCALING_DRIVER, - SCALING_GOVERNOR, - MAX_CPUFREQ_STRING_FILES -}; - -static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = { - [SCALING_DRIVER] = "scaling_driver", - [SCALING_GOVERNOR] = "scaling_governor", -}; - - -static char *sysfs_cpufreq_get_one_string(unsigned int cpu, - enum cpufreq_string which) -{ - char linebuf[MAX_LINE_LEN]; - char *result; - unsigned int len; - - if (which >= MAX_CPUFREQ_STRING_FILES) - return NULL; - - len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which], - linebuf, sizeof(linebuf)); - if (len == 0) - return NULL; - - result = strdup(linebuf); - if (result == NULL) - return NULL; - - if (result[strlen(result) - 1] == '\n') - result[strlen(result) - 1] = '\0'; - - return result; -} - -/* write access */ - -enum cpufreq_write { - WRITE_SCALING_MIN_FREQ, - WRITE_SCALING_MAX_FREQ, - WRITE_SCALING_GOVERNOR, - WRITE_SCALING_SET_SPEED, - MAX_CPUFREQ_WRITE_FILES -}; - -static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = { - [WRITE_SCALING_MIN_FREQ] = "scaling_min_freq", - [WRITE_SCALING_MAX_FREQ] = "scaling_max_freq", - [WRITE_SCALING_GOVERNOR] = "scaling_governor", - [WRITE_SCALING_SET_SPEED] = "scaling_setspeed", -}; - -static int sysfs_cpufreq_write_one_value(unsigned int cpu, - enum cpufreq_write which, - const char *new_value, size_t len) -{ - if (which >= MAX_CPUFREQ_WRITE_FILES) - return 0; - - if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which], - new_value, len) != len) - return -ENODEV; - - return 0; -}; - -unsigned long sysfs_get_freq_kernel(unsigned int cpu) -{ - return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ); -} - -unsigned long sysfs_get_freq_hardware(unsigned int cpu) -{ - return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ); -} - -unsigned long sysfs_get_freq_transition_latency(unsigned int cpu) -{ - return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY); -} - -int sysfs_get_freq_hardware_limits(unsigned int cpu, - unsigned long *min, - unsigned long *max) -{ - if ((!min) || (!max)) - return -EINVAL; - - *min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ); - if (!*min) - return -ENODEV; - - *max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ); - if (!*max) - return -ENODEV; - - return 0; -} - -char *sysfs_get_freq_driver(unsigned int cpu) -{ - return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER); -} - -struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu) -{ - struct cpufreq_policy *policy; - - policy = malloc(sizeof(struct cpufreq_policy)); - if (!policy) - return NULL; - - policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR); - if (!policy->governor) { - free(policy); - return NULL; - } - policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); - policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ); - if ((!policy->min) || (!policy->max)) { - free(policy->governor); - free(policy); - return NULL; - } - - return policy; -} - -struct cpufreq_available_governors * -sysfs_get_freq_available_governors(unsigned int cpu) { - struct cpufreq_available_governors *first = NULL; - struct cpufreq_available_governors *current = NULL; - char linebuf[MAX_LINE_LEN]; - unsigned int pos, i; - unsigned int len; - - len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors", - linebuf, sizeof(linebuf)); - if (len == 0) - return NULL; - - pos = 0; - for (i = 0; i < len; i++) { - if (linebuf[i] == ' ' || linebuf[i] == '\n') { - if (i - pos < 2) - continue; - if (current) { - current->next = malloc(sizeof(*current)); - if (!current->next) - goto error_out; - current = current->next; - } else { - first = malloc(sizeof(*first)); - if (!first) - goto error_out; - current = first; - } - current->first = first; - current->next = NULL; - - current->governor = malloc(i - pos + 1); - if (!current->governor) - goto error_out; - - memcpy(current->governor, linebuf + pos, i - pos); - current->governor[i - pos] = '\0'; - pos = i + 1; - } - } - - return first; - - error_out: - while (first) { - current = first->next; - if (first->governor) - free(first->governor); - free(first); - first = current; - } - return NULL; -} - - -struct cpufreq_available_frequencies * -sysfs_get_available_frequencies(unsigned int cpu) { - struct cpufreq_available_frequencies *first = NULL; - struct cpufreq_available_frequencies *current = NULL; - char one_value[SYSFS_PATH_MAX]; - char linebuf[MAX_LINE_LEN]; - unsigned int pos, i; - unsigned int len; - - len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies", - linebuf, sizeof(linebuf)); - if (len == 0) - return NULL; - - pos = 0; - for (i = 0; i < len; i++) { - if (linebuf[i] == ' ' || linebuf[i] == '\n') { - if (i - pos < 2) - continue; - if (i - pos >= SYSFS_PATH_MAX) - goto error_out; - if (current) { - current->next = malloc(sizeof(*current)); - if (!current->next) - goto error_out; - current = current->next; - } else { - first = malloc(sizeof(*first)); - if (!first) - goto error_out; - current = first; - } - current->first = first; - current->next = NULL; - - memcpy(one_value, linebuf + pos, i - pos); - one_value[i - pos] = '\0'; - if (sscanf(one_value, "%lu", ¤t->frequency) != 1) - goto error_out; - - pos = i + 1; - } - } - - return first; - - error_out: - while (first) { - current = first->next; - free(first); - first = current; - } - return NULL; -} - -static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu, - const char *file) -{ - struct cpufreq_affected_cpus *first = NULL; - struct cpufreq_affected_cpus *current = NULL; - char one_value[SYSFS_PATH_MAX]; - char linebuf[MAX_LINE_LEN]; - unsigned int pos, i; - unsigned int len; - - len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf)); - if (len == 0) - return NULL; - - pos = 0; - for (i = 0; i < len; i++) { - if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') { - if (i - pos < 1) - continue; - if (i - pos >= SYSFS_PATH_MAX) - goto error_out; - if (current) { - current->next = malloc(sizeof(*current)); - if (!current->next) - goto error_out; - current = current->next; - } else { - first = malloc(sizeof(*first)); - if (!first) - goto error_out; - current = first; - } - current->first = first; - current->next = NULL; - - memcpy(one_value, linebuf + pos, i - pos); - one_value[i - pos] = '\0'; - - if (sscanf(one_value, "%u", ¤t->cpu) != 1) - goto error_out; - - pos = i + 1; - } - } - - return first; - - error_out: - while (first) { - current = first->next; - free(first); - first = current; - } - return NULL; -} - -struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(unsigned int cpu) -{ - return sysfs_get_cpu_list(cpu, "affected_cpus"); -} - -struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(unsigned int cpu) -{ - return sysfs_get_cpu_list(cpu, "related_cpus"); -} - -struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu, - unsigned long long *total_time) { - struct cpufreq_stats *first = NULL; - struct cpufreq_stats *current = NULL; - char one_value[SYSFS_PATH_MAX]; - char linebuf[MAX_LINE_LEN]; - unsigned int pos, i; - unsigned int len; - - len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state", - linebuf, sizeof(linebuf)); - if (len == 0) - return NULL; - - *total_time = 0; - pos = 0; - for (i = 0; i < len; i++) { - if (i == strlen(linebuf) || linebuf[i] == '\n') { - if (i - pos < 2) - continue; - if ((i - pos) >= SYSFS_PATH_MAX) - goto error_out; - if (current) { - current->next = malloc(sizeof(*current)); - if (!current->next) - goto error_out; - current = current->next; - } else { - first = malloc(sizeof(*first)); - if (!first) - goto error_out; - current = first; - } - current->first = first; - current->next = NULL; - - memcpy(one_value, linebuf + pos, i - pos); - one_value[i - pos] = '\0'; - if (sscanf(one_value, "%lu %llu", - ¤t->frequency, - ¤t->time_in_state) != 2) - goto error_out; - - *total_time = *total_time + current->time_in_state; - pos = i + 1; - } - } - - return first; - - error_out: - while (first) { - current = first->next; - free(first); - first = current; - } - return NULL; -} - -unsigned long sysfs_get_freq_transitions(unsigned int cpu) -{ - return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS); -} - -static int verify_gov(char *new_gov, char *passed_gov) -{ - unsigned int i, j = 0; - - if (!passed_gov || (strlen(passed_gov) > 19)) - return -EINVAL; - - strncpy(new_gov, passed_gov, 20); - for (i = 0; i < 20; i++) { - if (j) { - new_gov[i] = '\0'; - continue; - } - if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z')) - continue; - - if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z')) - continue; - - if (new_gov[i] == '-') - continue; - - if (new_gov[i] == '_') - continue; - - if (new_gov[i] == '\0') { - j = 1; - continue; - } - return -EINVAL; - } - new_gov[19] = '\0'; - return 0; -} - -int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor) -{ - char new_gov[SYSFS_PATH_MAX]; - - if (!governor) - return -EINVAL; - - if (verify_gov(new_gov, governor)) - return -EINVAL; - - return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, - new_gov, strlen(new_gov)); -}; - -int sysfs_modify_freq_policy_max(unsigned int cpu, unsigned long max_freq) -{ - char value[SYSFS_PATH_MAX]; - - snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq); - - return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, - value, strlen(value)); -}; - - -int sysfs_modify_freq_policy_min(unsigned int cpu, unsigned long min_freq) -{ - char value[SYSFS_PATH_MAX]; - - snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq); - - return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, - value, strlen(value)); -}; - - -int sysfs_set_freq_policy(unsigned int cpu, struct cpufreq_policy *policy) -{ - char min[SYSFS_PATH_MAX]; - char max[SYSFS_PATH_MAX]; - char gov[SYSFS_PATH_MAX]; - int ret; - unsigned long old_min; - int write_max_first; - - if (!policy || !(policy->governor)) - return -EINVAL; - - if (policy->max < policy->min) - return -EINVAL; - - if (verify_gov(gov, policy->governor)) - return -EINVAL; - - snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min); - snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max); - - old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); - write_max_first = (old_min && (policy->max < old_min) ? 0 : 1); - - if (write_max_first) { - ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, - max, strlen(max)); - if (ret) - return ret; - } - - ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min, - strlen(min)); - if (ret) - return ret; - - if (!write_max_first) { - ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, - max, strlen(max)); - if (ret) - return ret; - } - - return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, - gov, strlen(gov)); -} - -int sysfs_set_frequency(unsigned int cpu, unsigned long target_frequency) -{ - struct cpufreq_policy *pol = sysfs_get_freq_policy(cpu); - char userspace_gov[] = "userspace"; - char freq[SYSFS_PATH_MAX]; - int ret; - - if (!pol) - return -ENODEV; - - if (strncmp(pol->governor, userspace_gov, 9) != 0) { - ret = sysfs_modify_freq_policy_governor(cpu, userspace_gov); - if (ret) { - cpufreq_put_policy(pol); - return ret; - } - } - - cpufreq_put_policy(pol); - - snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency); - - return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED, - freq, strlen(freq)); -} - -/* CPUFREQ sysfs access **************************************************/ - -/* General sysfs access **************************************************/ -int sysfs_cpu_exists(unsigned int cpu) -{ - char file[SYSFS_PATH_MAX]; - struct stat statbuf; - - snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/", cpu); - - if (stat(file, &statbuf) != 0) - return -ENOSYS; - - return S_ISDIR(statbuf.st_mode) ? 0 : -ENOSYS; -} - -/* General sysfs access **************************************************/ diff --git a/tools/power/cpupower/lib/sysfs.h b/tools/power/cpupower/lib/sysfs.h deleted file mode 100644 index c76a5e0af5016..0000000000000 --- a/tools/power/cpupower/lib/sysfs.h +++ /dev/null @@ -1,31 +0,0 @@ -/* General */ -extern unsigned int sysfs_cpu_exists(unsigned int cpu); - -/* CPUfreq */ -extern unsigned long sysfs_get_freq_kernel(unsigned int cpu); -extern unsigned long sysfs_get_freq_hardware(unsigned int cpu); -extern unsigned long sysfs_get_freq_transition_latency(unsigned int cpu); -extern int sysfs_get_freq_hardware_limits(unsigned int cpu, - unsigned long *min, unsigned long *max); -extern char *sysfs_get_freq_driver(unsigned int cpu); -extern struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu); -extern struct cpufreq_available_governors *sysfs_get_freq_available_governors( - unsigned int cpu); -extern struct cpufreq_available_frequencies *sysfs_get_available_frequencies( - unsigned int cpu); -extern struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus( - unsigned int cpu); -extern struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus( - unsigned int cpu); -extern struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu, - unsigned long long *total_time); -extern unsigned long sysfs_get_freq_transitions(unsigned int cpu); -extern int sysfs_set_freq_policy(unsigned int cpu, - struct cpufreq_policy *policy); -extern int sysfs_modify_freq_policy_min(unsigned int cpu, - unsigned long min_freq); -extern int sysfs_modify_freq_policy_max(unsigned int cpu, - unsigned long max_freq); -extern int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor); -extern int sysfs_set_frequency(unsigned int cpu, - unsigned long target_frequency); diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1 index 9c85a382e3554..6aa8d239dff9d 100644 --- a/tools/power/cpupower/man/cpupower-frequency-info.1 +++ b/tools/power/cpupower/man/cpupower-frequency-info.1 @@ -1,7 +1,7 @@ .TH "CPUPOWER\-FREQUENCY\-INFO" "1" "0.1" "" "cpupower Manual" .SH "NAME" .LP -cpupower frequency\-info \- Utility to retrieve cpufreq kernel information +cpupower\-frequency\-info \- Utility to retrieve cpufreq kernel information .SH "SYNTAX" .LP cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP] diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1 index 3eacc8d03d1a1..b50570221a5b2 100644 --- a/tools/power/cpupower/man/cpupower-frequency-set.1 +++ b/tools/power/cpupower/man/cpupower-frequency-set.1 @@ -1,7 +1,7 @@ .TH "CPUPOWER\-FREQUENCY\-SET" "1" "0.1" "" "cpupower Manual" .SH "NAME" .LP -cpupower frequency\-set \- A small tool which allows to modify cpufreq settings. +cpupower\-frequency\-set \- A small tool which allows to modify cpufreq settings. .SH "SYNTAX" .LP cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP] diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1 index 7b3646adb92f5..80a1311fa7477 100644 --- a/tools/power/cpupower/man/cpupower-idle-info.1 +++ b/tools/power/cpupower/man/cpupower-idle-info.1 @@ -1,7 +1,7 @@ .TH "CPUPOWER-IDLE-INFO" "1" "0.1" "" "cpupower Manual" .SH "NAME" .LP -cpupower idle\-info \- Utility to retrieve cpu idle kernel information +cpupower\-idle\-info \- Utility to retrieve cpu idle kernel information .SH "SYNTAX" .LP cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP] diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1 index 580c4e3ea92ad..21916cff7516a 100644 --- a/tools/power/cpupower/man/cpupower-idle-set.1 +++ b/tools/power/cpupower/man/cpupower-idle-set.1 @@ -1,7 +1,7 @@ .TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual" .SH "NAME" .LP -cpupower idle\-set \- Utility to set cpu idle state specific kernel options +cpupower\-idle\-set \- Utility to set cpu idle state specific kernel options .SH "SYNTAX" .LP cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP] diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c index 0fbd1a22c0a98..b4bf76971dc97 100644 --- a/tools/power/cpupower/utils/cpufreq-set.c +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -16,8 +16,8 @@ #include <getopt.h> #include "cpufreq.h" +#include "cpuidle.h" #include "helpers/helpers.h" -#include "helpers/sysfs.h" #define NORM_FREQ_LEN 32 @@ -296,7 +296,7 @@ int cmd_freq_set(int argc, char **argv) struct cpufreq_affected_cpus *cpus; if (!bitmask_isbitset(cpus_chosen, cpu) || - cpufreq_cpu_exists(cpu)) + cpupower_is_cpu_online(cpu)) continue; cpus = cpufreq_get_related_cpus(cpu); @@ -316,10 +316,10 @@ int cmd_freq_set(int argc, char **argv) cpu <= bitmask_last(cpus_chosen); cpu++) { if (!bitmask_isbitset(cpus_chosen, cpu) || - cpufreq_cpu_exists(cpu)) + cpupower_is_cpu_online(cpu)) continue; - if (sysfs_is_cpu_online(cpu) != 1) + if (cpupower_is_cpu_online(cpu) != 1) continue; printf(_("Setting cpu: %d\n"), cpu); diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c index 8bf8ab5ffa25d..b59c85defa053 100644 --- a/tools/power/cpupower/utils/cpuidle-info.c +++ b/tools/power/cpupower/utils/cpuidle-info.c @@ -13,8 +13,10 @@ #include <string.h> #include <getopt.h> -#include "helpers/helpers.h" +#include <cpuidle.h> + #include "helpers/sysfs.h" +#include "helpers/helpers.h" #include "helpers/bitmask.h" #define LINE_LEN 10 @@ -24,7 +26,7 @@ static void cpuidle_cpu_output(unsigned int cpu, int verbose) unsigned int idlestates, idlestate; char *tmp; - idlestates = sysfs_get_idlestate_count(cpu); + idlestates = cpuidle_state_count(cpu); if (idlestates == 0) { printf(_("CPU %u: No idle states\n"), cpu); return; @@ -33,7 +35,7 @@ static void cpuidle_cpu_output(unsigned int cpu, int verbose) printf(_("Number of idle states: %d\n"), idlestates); printf(_("Available idle states:")); for (idlestate = 0; idlestate < idlestates; idlestate++) { - tmp = sysfs_get_idlestate_name(cpu, idlestate); + tmp = cpuidle_state_name(cpu, idlestate); if (!tmp) continue; printf(" %s", tmp); @@ -45,28 +47,28 @@ static void cpuidle_cpu_output(unsigned int cpu, int verbose) return; for (idlestate = 0; idlestate < idlestates; idlestate++) { - int disabled = sysfs_is_idlestate_disabled(cpu, idlestate); + int disabled = cpuidle_is_state_disabled(cpu, idlestate); /* Disabled interface not supported on older kernels */ if (disabled < 0) disabled = 0; - tmp = sysfs_get_idlestate_name(cpu, idlestate); + tmp = cpuidle_state_name(cpu, idlestate); if (!tmp) continue; printf("%s%s:\n", tmp, (disabled) ? " (DISABLED) " : ""); free(tmp); - tmp = sysfs_get_idlestate_desc(cpu, idlestate); + tmp = cpuidle_state_desc(cpu, idlestate); if (!tmp) continue; printf(_("Flags/Description: %s\n"), tmp); free(tmp); printf(_("Latency: %lu\n"), - sysfs_get_idlestate_latency(cpu, idlestate)); + cpuidle_state_latency(cpu, idlestate)); printf(_("Usage: %lu\n"), - sysfs_get_idlestate_usage(cpu, idlestate)); + cpuidle_state_usage(cpu, idlestate)); printf(_("Duration: %llu\n"), - sysfs_get_idlestate_time(cpu, idlestate)); + cpuidle_state_time(cpu, idlestate)); } } @@ -74,7 +76,7 @@ static void cpuidle_general_output(void) { char *tmp; - tmp = sysfs_get_cpuidle_driver(); + tmp = cpuidle_get_driver(); if (!tmp) { printf(_("Could not determine cpuidle driver\n")); return; @@ -83,7 +85,7 @@ static void cpuidle_general_output(void) printf(_("CPUidle driver: %s\n"), tmp); free(tmp); - tmp = sysfs_get_cpuidle_governor(); + tmp = cpuidle_get_governor(); if (!tmp) { printf(_("Could not determine cpuidle governor\n")); return; @@ -98,7 +100,7 @@ static void proc_cpuidle_cpu_output(unsigned int cpu) long max_allowed_cstate = 2000000000; unsigned int cstate, cstates; - cstates = sysfs_get_idlestate_count(cpu); + cstates = cpuidle_state_count(cpu); if (cstates == 0) { printf(_("CPU %u: No C-states info\n"), cpu); return; @@ -113,11 +115,11 @@ static void proc_cpuidle_cpu_output(unsigned int cpu) "type[C%d] "), cstate, cstate); printf(_("promotion[--] demotion[--] ")); printf(_("latency[%03lu] "), - sysfs_get_idlestate_latency(cpu, cstate)); + cpuidle_state_latency(cpu, cstate)); printf(_("usage[%08lu] "), - sysfs_get_idlestate_usage(cpu, cstate)); + cpuidle_state_usage(cpu, cstate)); printf(_("duration[%020Lu] \n"), - sysfs_get_idlestate_time(cpu, cstate)); + cpuidle_state_time(cpu, cstate)); } } diff --git a/tools/power/cpupower/utils/cpuidle-set.c b/tools/power/cpupower/utils/cpuidle-set.c index d6b6ae44b8c24..691c24d50ef4d 100644 --- a/tools/power/cpupower/utils/cpuidle-set.c +++ b/tools/power/cpupower/utils/cpuidle-set.c @@ -5,12 +5,12 @@ #include <limits.h> #include <string.h> #include <ctype.h> - #include <getopt.h> -#include "cpufreq.h" +#include <cpufreq.h> +#include <cpuidle.h> + #include "helpers/helpers.h" -#include "helpers/sysfs.h" static struct option info_opts[] = { {"disable", required_argument, NULL, 'd'}, @@ -104,16 +104,16 @@ int cmd_idle_set(int argc, char **argv) if (!bitmask_isbitset(cpus_chosen, cpu)) continue; - if (sysfs_is_cpu_online(cpu) != 1) + if (cpupower_is_cpu_online(cpu) != 1) continue; - idlestates = sysfs_get_idlestate_count(cpu); + idlestates = cpuidle_state_count(cpu); if (idlestates <= 0) continue; switch (param) { case 'd': - ret = sysfs_idlestate_disable(cpu, idlestate, 1); + ret = cpuidle_state_disable(cpu, idlestate, 1); if (ret == 0) printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu); else if (ret == -1) @@ -126,7 +126,7 @@ int cmd_idle_set(int argc, char **argv) idlestate, cpu); break; case 'e': - ret = sysfs_idlestate_disable(cpu, idlestate, 0); + ret = cpuidle_state_disable(cpu, idlestate, 0); if (ret == 0) printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu); else if (ret == -1) @@ -140,13 +140,13 @@ int cmd_idle_set(int argc, char **argv) break; case 'D': for (idlestate = 0; idlestate < idlestates; idlestate++) { - disabled = sysfs_is_idlestate_disabled + disabled = cpuidle_is_state_disabled (cpu, idlestate); - state_latency = sysfs_get_idlestate_latency + state_latency = cpuidle_state_latency (cpu, idlestate); if (disabled == 1) { if (latency > state_latency){ - ret = sysfs_idlestate_disable + ret = cpuidle_state_disable (cpu, idlestate, 0); if (ret == 0) printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu); @@ -154,7 +154,7 @@ int cmd_idle_set(int argc, char **argv) continue; } if (latency <= state_latency){ - ret = sysfs_idlestate_disable + ret = cpuidle_state_disable (cpu, idlestate, 1); if (ret == 0) printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu); @@ -163,10 +163,10 @@ int cmd_idle_set(int argc, char **argv) break; case 'E': for (idlestate = 0; idlestate < idlestates; idlestate++) { - disabled = sysfs_is_idlestate_disabled + disabled = cpuidle_is_state_disabled (cpu, idlestate); if (disabled == 1) { - ret = sysfs_idlestate_disable + ret = cpuidle_state_disable (cpu, idlestate, 0); if (ret == 0) printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu); diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h index aa9e95486a2d6..afb66f80554ec 100644 --- a/tools/power/cpupower/utils/helpers/helpers.h +++ b/tools/power/cpupower/utils/helpers/helpers.h @@ -14,6 +14,7 @@ #include <locale.h> #include "helpers/bitmask.h" +#include <cpupower.h> /* Internationalization ****************************/ #ifdef NLS @@ -92,31 +93,6 @@ extern int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info); extern struct cpupower_cpu_info cpupower_cpu_info; /* cpuid and cpuinfo helpers **************************/ -struct cpuid_core_info { - int pkg; - int core; - int cpu; - - /* flags */ - unsigned int is_online:1; -}; - -/* CPU topology/hierarchy parsing ******************/ -struct cpupower_topology { - /* Amount of CPU cores, packages and threads per core in the system */ - unsigned int cores; - unsigned int pkgs; - unsigned int threads; /* per core */ - - /* Array gets mallocated with cores entries, holding per core info */ - struct cpuid_core_info *core_info; -}; - -extern int get_cpu_topology(struct cpupower_topology *cpu_top); -extern void cpu_topology_release(struct cpupower_topology cpu_top); - -/* CPU topology/hierarchy parsing ******************/ - /* X86 ONLY ****************************************/ #if defined(__i386__) || defined(__x86_64__) diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c index 5f9c908f4557e..a1a6c6041a1e3 100644 --- a/tools/power/cpupower/utils/helpers/topology.c +++ b/tools/power/cpupower/utils/helpers/topology.c @@ -16,110 +16,7 @@ #include <errno.h> #include <fcntl.h> -#include <helpers/helpers.h> -#include <helpers/sysfs.h> +#include <cpuidle.h> -/* returns -1 on failure, 0 on success */ -static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result) -{ - char linebuf[MAX_LINE_LEN]; - char *endp; - char path[SYSFS_PATH_MAX]; +/* CPU topology/hierarchy parsing ******************/ - snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s", - cpu, fname); - if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0) - return -1; - *result = strtol(linebuf, &endp, 0); - if (endp == linebuf || errno == ERANGE) - return -1; - return 0; -} - -static int __compare(const void *t1, const void *t2) -{ - struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1; - struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2; - if (top1->pkg < top2->pkg) - return -1; - else if (top1->pkg > top2->pkg) - return 1; - else if (top1->core < top2->core) - return -1; - else if (top1->core > top2->core) - return 1; - else if (top1->cpu < top2->cpu) - return -1; - else if (top1->cpu > top2->cpu) - return 1; - else - return 0; -} - -/* - * Returns amount of cpus, negative on error, cpu_top must be - * passed to cpu_topology_release to free resources - * - * Array is sorted after ->pkg, ->core, then ->cpu - */ -int get_cpu_topology(struct cpupower_topology *cpu_top) -{ - int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF); - - cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus); - if (cpu_top->core_info == NULL) - return -ENOMEM; - cpu_top->pkgs = cpu_top->cores = 0; - for (cpu = 0; cpu < cpus; cpu++) { - cpu_top->core_info[cpu].cpu = cpu; - cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu); - if(sysfs_topology_read_file( - cpu, - "physical_package_id", - &(cpu_top->core_info[cpu].pkg)) < 0) { - cpu_top->core_info[cpu].pkg = -1; - cpu_top->core_info[cpu].core = -1; - continue; - } - if(sysfs_topology_read_file( - cpu, - "core_id", - &(cpu_top->core_info[cpu].core)) < 0) { - cpu_top->core_info[cpu].pkg = -1; - cpu_top->core_info[cpu].core = -1; - continue; - } - } - - qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info), - __compare); - - /* Count the number of distinct pkgs values. This works - because the primary sort of the core_info struct was just - done by pkg value. */ - last_pkg = cpu_top->core_info[0].pkg; - for(cpu = 1; cpu < cpus; cpu++) { - if (cpu_top->core_info[cpu].pkg != last_pkg && - cpu_top->core_info[cpu].pkg != -1) { - - last_pkg = cpu_top->core_info[cpu].pkg; - cpu_top->pkgs++; - } - } - if (!(cpu_top->core_info[0].pkg == -1)) - cpu_top->pkgs++; - - /* Intel's cores count is not consecutively numbered, there may - * be a core_id of 3, but none of 2. Assume there always is 0 - * Get amount of cores by counting duplicates in a package - for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) { - if (cpu_top->core_info[cpu].core == 0) - cpu_top->cores++; - */ - return cpus; -} - -void cpu_topology_release(struct cpupower_topology cpu_top) -{ - free(cpu_top.core_info); -} diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c index bcd22a1a39708..1b5da0066ebf9 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c +++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c @@ -10,8 +10,8 @@ #include <stdint.h> #include <string.h> #include <limits.h> +#include <cpuidle.h> -#include "helpers/sysfs.h" #include "helpers/helpers.h" #include "idle_monitor/cpupower-monitor.h" @@ -51,7 +51,7 @@ static int cpuidle_start(void) for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num; state++) { previous_count[cpu][state] = - sysfs_get_idlestate_time(cpu, state); + cpuidle_state_time(cpu, state); dprint("CPU %d - State: %d - Val: %llu\n", cpu, state, previous_count[cpu][state]); } @@ -70,7 +70,7 @@ static int cpuidle_stop(void) for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num; state++) { current_count[cpu][state] = - sysfs_get_idlestate_time(cpu, state); + cpuidle_state_time(cpu, state); dprint("CPU %d - State: %d - Val: %llu\n", cpu, state, previous_count[cpu][state]); } @@ -132,13 +132,13 @@ static struct cpuidle_monitor *cpuidle_register(void) char *tmp; /* Assume idle state count is the same for all CPUs */ - cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0); + cpuidle_sysfs_monitor.hw_states_num = cpuidle_state_count(0); if (cpuidle_sysfs_monitor.hw_states_num <= 0) return NULL; for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) { - tmp = sysfs_get_idlestate_name(0, num); + tmp = cpuidle_state_name(0, num); if (tmp == NULL) continue; @@ -146,7 +146,7 @@ static struct cpuidle_monitor *cpuidle_register(void) strncpy(cpuidle_cstates[num].name, tmp, CSTATE_NAME_LEN - 1); free(tmp); - tmp = sysfs_get_idlestate_desc(0, num); + tmp = cpuidle_state_desc(0, num); if (tmp == NULL) continue; strncpy(cpuidle_cstates[num].desc, tmp, CSTATE_DESC_LEN - 1); |