diff options
Diffstat (limited to 'Documentation')
7 files changed, 99 insertions, 4 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-pwm b/Documentation/ABI/testing/sysfs-class-pwm index c479d77b67c54..c20e61354561d 100644 --- a/Documentation/ABI/testing/sysfs-class-pwm +++ b/Documentation/ABI/testing/sysfs-class-pwm @@ -77,3 +77,12 @@ Description: Enable/disable the PWM signal. 0 is disabled 1 is enabled + +What: /sys/class/pwm/pwmchipN/pwmX/capture +Date: June 2016 +KernelVersion: 4.8 +Contact: Lee Jones <lee.jones@linaro.org> +Description: + Capture information about a PWM signal. The output format is a + pair unsigned integers (period and duty cycle), separated by a + single space. diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt new file mode 100644 index 0000000000000..21f75bbd6dae4 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt @@ -0,0 +1,21 @@ +Broadcom iProc PWM controller device tree bindings + +This controller has 4 channels. + +Required Properties : +- compatible: must be "brcm,iproc-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle + clock specifier pair for the external clock +- #pwm-cells: Should be 3. See pwm.txt in this directory for a + description of the cells format. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + +pwm: pwm@18031000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18031000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; +}; diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt new file mode 100644 index 0000000000000..472bd46ab5a4d --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt @@ -0,0 +1,23 @@ +* PWM controlled by ChromeOS EC + +Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller +(EC) and controlled via a host-command interface. + +An EC PWM node should be only found as a sub-node of the EC node (see +Documentation/devicetree/bindings/mfd/cros-ec.txt). + +Required properties: +- compatible: Must contain "google,cros-ec-pwm" +- #pwm-cells: Should be 1. The cell specifies the PWM index. + +Example: + cros-ec@0 { + compatible = "google,cros-ec-spi"; + + ... + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index c52f03b5032f8..b4e73778dda3a 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -1,10 +1,14 @@ Tegra SoC PWFM controller Required properties: -- compatible: For Tegra20, must contain "nvidia,tegra20-pwm". For Tegra30, - must contain "nvidia,tegra30-pwm". Otherwise, must contain - "nvidia,<chip>-pwm", plus one of the above, where <chip> is tegra114, - tegra124, tegra132, or tegra210. +- compatible: Must be: + - "nvidia,tegra20-pwm": for Tegra20 + - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30 + - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114 + - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124 + - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132 + - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210 + - "nvidia,tegra186-pwm": for Tegra186 - reg: physical base address and length of the controller's registers - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index 0822a083fc577..d6de643350223 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -7,6 +7,7 @@ Required Properties: - "renesas,pwm-r8a7790": for R-Car H2 - "renesas,pwm-r8a7791": for R-Car M2-W - "renesas,pwm-r8a7794": for R-Car E2 + - "renesas,pwm-r8a7795": for R-Car H3 - reg: base address and length of the registers block for the PWM. - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt new file mode 100644 index 0000000000000..cb209646bf132 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt @@ -0,0 +1,18 @@ +== ST STMPE PWM controller == + +This is a PWM block embedded in the ST Microelectronics STMPE +(ST Multi-Purpose Expander) chips. The PWM is registered as a +subdevices of the STMPE MFD device. + +Required properties: +- compatible: should be: + - "st,stmpe-pwm" +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. + +Example: + +pwm0: pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index dd6f59cf1455e..3aeba9f86ed8e 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -34,6 +34,18 @@ Only required for Voltage Table Mode: First cell is voltage in microvolts (uV) Second cell is duty-cycle in percent (%) +Optional properties for Continuous mode: +- pwm-dutycycle-unit: Integer value encoding the duty cycle unit. If not + defined, <100> is assumed, meaning that + pwm-dutycycle-range contains values expressed in + percent. + +- pwm-dutycycle-range: Should contain 2 entries. The first entry is encoding + the dutycycle for regulator-min-microvolt and the + second one the dutycycle for regulator-max-microvolt. + Duty cycle values are expressed in pwm-dutycycle-unit. + If not defined, <0 100> is assumed. + NB: To be clear, if voltage-table is provided, then the device will be used in Voltage Table Mode. If no voltage-table is provided, then the device will be used in Continuous Voltage Mode. @@ -53,6 +65,13 @@ Continuous Voltage With Enable GPIO Example: regulator-min-microvolt = <1016000>; regulator-max-microvolt = <1114000>; regulator-name = "vdd_logic"; + /* unit == per-mille */ + pwm-dutycycle-unit = <1000>; + /* + * Inverted PWM logic, and the duty cycle range is limited + * to 30%-70%. + */ + pwm-dutycycle-range <700 300>; /* */ }; Voltage Table Example: |