diff options
Diffstat (limited to 'arch/frv/kernel/cmode.S')
| -rw-r--r-- | arch/frv/kernel/cmode.S | 189 |
1 files changed, 0 insertions, 189 deletions
diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S deleted file mode 100644 index 53deeb5d7e87d..0000000000000 --- a/arch/frv/kernel/cmode.S +++ /dev/null @@ -1,189 +0,0 @@ -/* cmode.S: clock mode management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@infradead.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/ptrace.h> -#include <asm/errno.h> -#include <asm/cache.h> -#include <asm/spr-regs.h> - -#define __addr_MASK 0xfeff9820 /* interrupt controller mask */ - -#define __addr_SDRAMC 0xfe000400 /* SDRAM controller regs */ -#define SDRAMC_DSTS 0x28 /* SDRAM status */ -#define SDRAMC_DSTS_SSI 0x00000001 /* indicates that the SDRAM is in self-refresh mode */ -#define SDRAMC_DRCN 0x30 /* SDRAM refresh control */ -#define SDRAMC_DRCN_SR 0x00000001 /* transition SDRAM into self-refresh mode */ -#define __addr_CLKC 0xfeff9a00 -#define CLKC_SWCMODE 0x00000008 -#define __addr_LEDS 0xe1200004 - -.macro li v r - sethi.p %hi(\v),\r - setlo %lo(\v),\r -.endm - - .text - .balign 4 - - -############################################################################### -# -# Change CMODE -# - void frv_change_cmode(int cmode) -# -############################################################################### - .globl frv_change_cmode - .type frv_change_cmode,@function - -.macro LEDS v -#ifdef DEBUG_CMODE - setlos #~\v,gr10 - sti gr10,@(gr11,#0) - membar -#endif -.endm - -frv_change_cmode: - movsg lr,gr9 -#ifdef DEBUG_CMODE - li __addr_LEDS,gr11 -#endif - dcef @(gr0,gr0),#1 - - # Shift argument left by 24 bits to fit in SWCMODE register later. - slli gr8,#24,gr8 - - # (1) Set '0' in the PSR.ET bit, and prohibit interrupts. - movsg psr,gr14 - andi gr14,#~PSR_ET,gr3 - movgs gr3,psr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (2) Set '0' to all bits of the MASK register of the interrupt - # controller, and mask interrupts. - li __addr_MASK,gr12 - ldi @(gr12,#0),gr13 - li 0xffff0000,gr4 - sti gr4,@(gr12,#0) -#endif - - # (3) Stop the transfer function of DMAC. Stop all the bus masters - # to access SDRAM and the internal resources. - - # (already done by caller) - - # (4) Preload a series of following instructions to the instruction - # cache. - li #__cmode_icache_lock_start,gr3 - li #__cmode_icache_lock_end,gr4 - -1: icpl gr3,gr0,#1 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - # Set up addresses in regs for later steps. - setlos SDRAMC_DRCN_SR,gr3 - li __addr_SDRAMC,gr4 - li __addr_CLKC,gr5 - ldi @(gr5,#0),gr6 - li #0x80000000,gr7 - or gr6,gr7,gr6 - - bra __cmode_icache_lock_start - - .balign L1_CACHE_BYTES -__cmode_icache_lock_start: - - # (5) Flush the content of all caches by the DCEF instruction. - dcef @(gr0,gr0),#1 - - # (6) Execute loading the dummy for SDRAM. - ldi @(gr9,#0),gr0 - - # (7) Set '1' to the DRCN.SR bit, and change SDRAM to the - # self-refresh mode. Execute the dummy load to all memory - # devices set to cacheable on the external bus side in parallel - # with this. - sti gr3,@(gr4,#SDRAMC_DRCN) - - # (8) Execute memory barrier instruction (MEMBAR). - membar - - # (9) Read the DSTS register repeatedly until '1' stands in the - # DSTS.SSI field. -1: ldi @(gr4,#SDRAMC_DSTS),gr3 - andicc gr3,#SDRAMC_DSTS_SSI,gr3,icc0 - beq icc0,#0,1b - - # (10) Execute memory barrier instruction (MEMBAR). - membar - -#if 1 - # (11) Set the value of CMODE that you want to change to - # SWCMODE.SWCM[3:0]. - sti gr8,@(gr5,#CLKC_SWCMODE) - - # (12) Set '1' to the CLKC.SWEN bit. In that case, do not change - # fields other than SWEN of the CLKC register. - sti gr6,@(gr5,#0) -#endif - # (13) Execute the instruction just after the memory barrier - # instruction that executes the self-loop 256 times. (Meanwhile, - # the CMODE switch is done.) - membar - setlos #256,gr7 -2: subicc gr7,#1,gr7,icc0 - bne icc0,#2,2b - - LEDS 0x36 - - # (14) Release the self-refresh of SDRAM. - sti gr0,@(gr4,#SDRAMC_DRCN) - - # Wait for it... -3: ldi @(gr4,#SDRAMC_DSTS),gr3 - andicc gr3,#SDRAMC_DSTS_SSI,gr3,icc0 - bne icc0,#2,3b - -#if 0 - li 0x0100000,gr10 -4: subicc gr10,#1,gr10,icc0 - - bne icc0,#0,4b -#endif - -__cmode_icache_lock_end: - - li #__cmode_icache_lock_start,gr3 - li #__cmode_icache_lock_end,gr4 - -4: icul gr3 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,4b - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (15) Release the interrupt mask setting of the MASK register of - # the interrupt controller if necessary. - sti gr13,@(gr12,#0) -#endif - # (16) Set 1' in the PSR.ET bit, and permit interrupt. - movgs gr14,psr - - bralr - - .size frv_change_cmode, .-frv_change_cmode |