summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c221
1 files changed, 170 insertions, 51 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a3fa65b1ca8e5..2e6e2a96b4f26 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -42,17 +42,27 @@
* This value is used for disabling properly EMAC
* and used as a good starting value in case of the
* boot process(uboot) leave some stuff.
+ * @syscon_field reg_field for the syscon's gmac register
* @soc_has_internal_phy: Does the MAC embed an internal PHY
* @support_mii: Does the MAC handle MII
* @support_rmii: Does the MAC handle RMII
* @support_rgmii: Does the MAC handle RGMII
+ *
+ * @rx_delay_max: Maximum raw value for RX delay chain
+ * @tx_delay_max: Maximum raw value for TX delay chain
+ * These two also indicate the bitmask for
+ * the RX and TX delay chain registers. A
+ * value of zero indicates this is not supported.
*/
struct emac_variant {
u32 default_syscon_value;
+ const struct reg_field *syscon_field;
bool soc_has_internal_phy;
bool support_mii;
bool support_rmii;
bool support_rgmii;
+ u8 rx_delay_max;
+ u8 tx_delay_max;
};
/* struct sunxi_priv_data - hold all sunxi private data
@@ -71,38 +81,70 @@ struct sunxi_priv_data {
struct regulator *regulator;
struct reset_control *rst_ephy;
const struct emac_variant *variant;
- struct regmap *regmap;
+ struct regmap_field *regmap_field;
bool internal_phy_powered;
void *mux_handle;
};
+/* EMAC clock register @ 0x30 in the "system control" address range */
+static const struct reg_field sun8i_syscon_reg_field = {
+ .reg = 0x30,
+ .lsb = 0,
+ .msb = 31,
+};
+
+/* EMAC clock register @ 0x164 in the CCU address range */
+static const struct reg_field sun8i_ccu_reg_field = {
+ .reg = 0x164,
+ .lsb = 0,
+ .msb = 31,
+};
+
static const struct emac_variant emac_variant_h3 = {
.default_syscon_value = 0x58000,
+ .syscon_field = &sun8i_syscon_reg_field,
.soc_has_internal_phy = true,
.support_mii = true,
.support_rmii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
static const struct emac_variant emac_variant_v3s = {
.default_syscon_value = 0x38000,
+ .syscon_field = &sun8i_syscon_reg_field,
.soc_has_internal_phy = true,
.support_mii = true
};
static const struct emac_variant emac_variant_a83t = {
.default_syscon_value = 0,
+ .syscon_field = &sun8i_syscon_reg_field,
.soc_has_internal_phy = false,
.support_mii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
+};
+
+static const struct emac_variant emac_variant_r40 = {
+ .default_syscon_value = 0,
+ .syscon_field = &sun8i_ccu_reg_field,
+ .support_mii = true,
+ .support_rgmii = true,
+ .rx_delay_max = 7,
};
static const struct emac_variant emac_variant_a64 = {
.default_syscon_value = 0,
+ .syscon_field = &sun8i_syscon_reg_field,
.soc_has_internal_phy = false,
.support_mii = true,
.support_rmii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
#define EMAC_BASIC_CTL0 0x00
@@ -206,9 +248,7 @@ static const struct emac_variant emac_variant_a64 = {
#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */
/* Generic system control EMAC_CLK bits */
-#define SYSCON_ETXDC_MASK GENMASK(2, 0)
#define SYSCON_ETXDC_SHIFT 10
-#define SYSCON_ERXDC_MASK GENMASK(4, 0)
#define SYSCON_ERXDC_SHIFT 5
/* EMAC PHY Interface Type */
#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */
@@ -216,7 +256,6 @@ static const struct emac_variant emac_variant_a64 = {
#define SYSCON_ETCS_MII 0x0
#define SYSCON_ETCS_EXT_GMII 0x1
#define SYSCON_ETCS_INT_GMII 0x2
-#define SYSCON_EMAC_REG 0x30
/* sun8i_dwmac_dma_reset() - reset the EMAC
* Called from stmmac via stmmac_dma_ops->reset
@@ -237,17 +276,28 @@ static int sun8i_dwmac_dma_reset(void __iomem *ioaddr)
* Called from stmmac via stmmac_dma_ops->init
*/
static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
- struct stmmac_dma_cfg *dma_cfg,
- u32 dma_tx, u32 dma_rx, int atds)
+ struct stmmac_dma_cfg *dma_cfg, int atds)
{
- /* Write TX and RX descriptors address */
- writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST);
- writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST);
-
writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
}
+static void sun8i_dwmac_dma_init_rx(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_rx_phy, u32 chan)
+{
+ /* Write RX descriptors address */
+ writel(dma_rx_phy, ioaddr + EMAC_RX_DESC_LIST);
+}
+
+static void sun8i_dwmac_dma_init_tx(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx_phy, u32 chan)
+{
+ /* Write TX descriptors address */
+ writel(dma_tx_phy, ioaddr + EMAC_TX_DESC_LIST);
+}
+
/* sun8i_dwmac_dump_regs() - Dump EMAC address space
* Called from stmmac_dma_ops->dump_regs
* Used for ethtool
@@ -398,13 +448,36 @@ static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr,
return ret;
}
-static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
- int rxmode, int rxfifosz)
+static void sun8i_dwmac_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+ u32 channel, int fifosz, u8 qmode)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_RX_CTL1);
+ if (mode == SF_DMA_MODE) {
+ v |= EMAC_RX_MD;
+ } else {
+ v &= ~EMAC_RX_MD;
+ v &= ~EMAC_RX_TH_MASK;
+ if (mode < 32)
+ v |= EMAC_RX_TH_32;
+ else if (mode < 64)
+ v |= EMAC_RX_TH_64;
+ else if (mode < 96)
+ v |= EMAC_RX_TH_96;
+ else if (mode < 128)
+ v |= EMAC_RX_TH_128;
+ }
+ writel(v, ioaddr + EMAC_RX_CTL1);
+}
+
+static void sun8i_dwmac_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+ u32 channel, int fifosz, u8 qmode)
{
u32 v;
v = readl(ioaddr + EMAC_TX_CTL1);
- if (txmode == SF_DMA_MODE) {
+ if (mode == SF_DMA_MODE) {
v |= EMAC_TX_MD;
/* Undocumented bit (called TX_NEXT_FRM in BSP), the original
* comment is
@@ -415,40 +488,26 @@ static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
} else {
v &= ~EMAC_TX_MD;
v &= ~EMAC_TX_TH_MASK;
- if (txmode < 64)
+ if (mode < 64)
v |= EMAC_TX_TH_64;
- else if (txmode < 128)
+ else if (mode < 128)
v |= EMAC_TX_TH_128;
- else if (txmode < 192)
+ else if (mode < 192)
v |= EMAC_TX_TH_192;
- else if (txmode < 256)
+ else if (mode < 256)
v |= EMAC_TX_TH_256;
}
writel(v, ioaddr + EMAC_TX_CTL1);
-
- v = readl(ioaddr + EMAC_RX_CTL1);
- if (rxmode == SF_DMA_MODE) {
- v |= EMAC_RX_MD;
- } else {
- v &= ~EMAC_RX_MD;
- v &= ~EMAC_RX_TH_MASK;
- if (rxmode < 32)
- v |= EMAC_RX_TH_32;
- else if (rxmode < 64)
- v |= EMAC_RX_TH_64;
- else if (rxmode < 96)
- v |= EMAC_RX_TH_96;
- else if (rxmode < 128)
- v |= EMAC_RX_TH_128;
- }
- writel(v, ioaddr + EMAC_RX_CTL1);
}
static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
.reset = sun8i_dwmac_dma_reset,
.init = sun8i_dwmac_dma_init,
+ .init_rx_chan = sun8i_dwmac_dma_init_rx,
+ .init_tx_chan = sun8i_dwmac_dma_init_tx,
.dump_regs = sun8i_dwmac_dump_regs,
- .dma_mode = sun8i_dwmac_dma_operation_mode,
+ .dma_rx_mode = sun8i_dwmac_dma_operation_mode_rx,
+ .dma_tx_mode = sun8i_dwmac_dma_operation_mode_tx,
.enable_dma_transmission = sun8i_dwmac_enable_dma_transmission,
.enable_dma_irq = sun8i_dwmac_enable_dma_irq,
.disable_dma_irq = sun8i_dwmac_disable_dma_irq,
@@ -745,7 +804,7 @@ static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
bool need_power_ephy = false;
if (current_child ^ desired_child) {
- regmap_read(gmac->regmap, SYSCON_EMAC_REG, &reg);
+ regmap_field_read(gmac->regmap_field, &reg);
switch (desired_child) {
case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
dev_info(priv->device, "Switch mux to internal PHY");
@@ -763,7 +822,7 @@ static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
desired_child);
return -EINVAL;
}
- regmap_write(gmac->regmap, SYSCON_EMAC_REG, val);
+ regmap_field_write(gmac->regmap_field, val);
if (need_power_ephy) {
ret = sun8i_dwmac_power_internal_phy(priv);
if (ret)
@@ -801,7 +860,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
int ret;
u32 reg, val;
- regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val);
+ regmap_field_read(gmac->regmap_field, &val);
reg = gmac->variant->default_syscon_value;
if (reg != val)
dev_warn(priv->device,
@@ -835,8 +894,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
}
val /= 100;
dev_dbg(priv->device, "set tx-delay to %x\n", val);
- if (val <= SYSCON_ETXDC_MASK) {
- reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT);
+ if (val <= gmac->variant->tx_delay_max) {
+ reg &= ~(gmac->variant->tx_delay_max <<
+ SYSCON_ETXDC_SHIFT);
reg |= (val << SYSCON_ETXDC_SHIFT);
} else {
dev_err(priv->device, "Invalid TX clock delay: %d\n",
@@ -852,8 +912,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
}
val /= 100;
dev_dbg(priv->device, "set rx-delay to %x\n", val);
- if (val <= SYSCON_ERXDC_MASK) {
- reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT);
+ if (val <= gmac->variant->rx_delay_max) {
+ reg &= ~(gmac->variant->rx_delay_max <<
+ SYSCON_ERXDC_SHIFT);
reg |= (val << SYSCON_ERXDC_SHIFT);
} else {
dev_err(priv->device, "Invalid RX clock delay: %d\n",
@@ -883,7 +944,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
return -EINVAL;
}
- regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
+ regmap_field_write(gmac->regmap_field, reg);
return 0;
}
@@ -892,7 +953,7 @@ static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac)
{
u32 reg = gmac->variant->default_syscon_value;
- regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
+ regmap_field_write(gmac->regmap_field, reg);
}
static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
@@ -971,6 +1032,34 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
return mac;
}
+static struct regmap *sun8i_dwmac_get_syscon_from_dev(struct device_node *node)
+{
+ struct device_node *syscon_node;
+ struct platform_device *syscon_pdev;
+ struct regmap *regmap = NULL;
+
+ syscon_node = of_parse_phandle(node, "syscon", 0);
+ if (!syscon_node)
+ return ERR_PTR(-ENODEV);
+
+ syscon_pdev = of_find_device_by_node(syscon_node);
+ if (!syscon_pdev) {
+ /* platform device might not be probed yet */
+ regmap = ERR_PTR(-EPROBE_DEFER);
+ goto out_put_node;
+ }
+
+ /* If no regmap is found then the other device driver is at fault */
+ regmap = dev_get_regmap(&syscon_pdev->dev, NULL);
+ if (!regmap)
+ regmap = ERR_PTR(-EINVAL);
+
+ platform_device_put(syscon_pdev);
+out_put_node:
+ of_node_put(syscon_node);
+ return regmap;
+}
+
static int sun8i_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
@@ -980,6 +1069,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
int ret;
struct stmmac_priv *priv;
struct net_device *ndev;
+ struct regmap *regmap;
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
@@ -1014,14 +1104,41 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
gmac->regulator = NULL;
}
- gmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
- "syscon");
- if (IS_ERR(gmac->regmap)) {
- ret = PTR_ERR(gmac->regmap);
+ /* The "GMAC clock control" register might be located in the
+ * CCU address range (on the R40), or the system control address
+ * range (on most other sun8i and later SoCs).
+ *
+ * The former controls most if not all clocks in the SoC. The
+ * latter has an SoC identification register, and on some SoCs,
+ * controls to map device specific SRAM to either the intended
+ * peripheral, or the CPU address space.
+ *
+ * In either case, there should be a coordinated and restricted
+ * method of accessing the register needed here. This is done by
+ * having the device export a custom regmap, instead of a generic
+ * syscon, which grants all access to all registers.
+ *
+ * To support old device trees, we fall back to using the syscon
+ * interface if possible.
+ */
+ regmap = sun8i_dwmac_get_syscon_from_dev(pdev->dev.of_node);
+ if (IS_ERR(regmap))
+ regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "syscon");
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret);
return ret;
}
+ gmac->regmap_field = devm_regmap_field_alloc(dev, regmap,
+ *gmac->variant->syscon_field);
+ if (IS_ERR(gmac->regmap_field)) {
+ ret = PTR_ERR(gmac->regmap_field);
+ dev_err(dev, "Unable to map syscon register: %d\n", ret);
+ return ret;
+ }
+
plat_dat->interface = of_get_phy_mode(dev->of_node);
/* platform data specifying hardware features and callbacks.
@@ -1078,6 +1195,8 @@ static const struct of_device_id sun8i_dwmac_match[] = {
.data = &emac_variant_v3s },
{ .compatible = "allwinner,sun8i-a83t-emac",
.data = &emac_variant_a83t },
+ { .compatible = "allwinner,sun8i-r40-gmac",
+ .data = &emac_variant_r40 },
{ .compatible = "allwinner,sun50i-a64-emac",
.data = &emac_variant_a64 },
{ }
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-26 18:42:06 +0000