diff options
Diffstat (limited to 'include/linux/ethtool.h')
| -rw-r--r-- | include/linux/ethtool.h | 43 |
1 files changed, 38 insertions, 5 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 15e4eb7136944..ef4a2d84d9221 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -49,13 +49,14 @@ static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep) return (ep->speed_hi << 16) | ep->speed; } +#define ETHTOOL_FWVERS_LEN 32 #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ struct ethtool_drvinfo { __u32 cmd; char driver[32]; /* driver short name, "tulip", "eepro100" */ char version[32]; /* driver version string */ - char fw_version[32]; /* firmware version string, if applicable */ + char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ /* For PCI devices, use pci_name(pci_dev). */ char reserved1[32]; @@ -495,13 +496,10 @@ struct ethtool_ops { u32 (*get_priv_flags)(struct net_device *); int (*set_priv_flags)(struct net_device *, u32); int (*get_sset_count)(struct net_device *, int); - - /* the following hooks are obsolete */ - int (*self_test_count)(struct net_device *);/* use get_sset_count */ - int (*get_stats_count)(struct net_device *);/* use get_sset_count */ int (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *); int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); int (*flash_device)(struct net_device *, struct ethtool_flash *); + int (*reset)(struct net_device *, u32 *); }; #endif /* __KERNEL__ */ @@ -559,6 +557,7 @@ struct ethtool_ops { #define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ #define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ #define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ +#define ETHTOOL_RESET 0x00000034 /* Reset hardware */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET @@ -633,6 +632,8 @@ struct ethtool_ops { #define PORT_MII 0x02 #define PORT_FIBRE 0x03 #define PORT_BNC 0x04 +#define PORT_DA 0x05 +#define PORT_NONE 0xef #define PORT_OTHER 0xff /* Which transceiver to use. */ @@ -676,6 +677,8 @@ struct ethtool_ops { #define AH_V6_FLOW 0x0b #define ESP_V6_FLOW 0x0c #define IP_USER_FLOW 0x0d +#define IPV4_FLOW 0x10 +#define IPV6_FLOW 0x11 /* L3-L4 network traffic flow hash options */ #define RXH_L2DA (1 << 1) @@ -689,4 +692,34 @@ struct ethtool_ops { #define RX_CLS_FLOW_DISC 0xffffffffffffffffULL +/* Reset flags */ +/* The reset() operation must clear the flags for the components which + * were actually reset. On successful return, the flags indicate the + * components which were not reset, either because they do not exist + * in the hardware or because they cannot be reset independently. The + * driver must never reset any components that were not requested. + */ +enum ethtool_reset_flags { + /* These flags represent components dedicated to the interface + * the command is addressed to. Shift any flag left by + * ETH_RESET_SHARED_SHIFT to reset a shared component of the + * same type. + */ + ETH_RESET_MGMT = 1 << 0, /* Management processor */ + ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ + ETH_RESET_DMA = 1 << 2, /* DMA engine */ + ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ + ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ + ETH_RESET_MAC = 1 << 5, /* Media access controller */ + ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ + ETH_RESET_RAM = 1 << 7, /* RAM shared between + * multiple components */ + + ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to + * this interface */ + ETH_RESET_ALL = 0xffffffff, /* All components used by this + * interface, even if shared */ +}; +#define ETH_RESET_SHARED_SHIFT 16 + #endif /* _LINUX_ETHTOOL_H */ |