diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 131 |
1 files changed, 112 insertions, 19 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 250dac390806f..5fbfe61f41c67 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1080,6 +1080,37 @@ struct sta_bss_parameters { }; /** + * struct cfg80211_txq_stats - TXQ statistics for this TID + * @filled: bitmap of flags using the bits of &enum nl80211_txq_stats to + * indicate the relevant values in this struct are filled + * @backlog_bytes: total number of bytes currently backlogged + * @backlog_packets: total number of packets currently backlogged + * @flows: number of new flows seen + * @drops: total number of packets dropped + * @ecn_marks: total number of packets marked with ECN CE + * @overlimit: number of drops due to queue space overflow + * @overmemory: number of drops due to memory limit overflow + * @collisions: number of hash collisions + * @tx_bytes: total number of bytes dequeued + * @tx_packets: total number of packets dequeued + * @max_flows: maximum number of flows supported + */ +struct cfg80211_txq_stats { + u32 filled; + u32 backlog_bytes; + u32 backlog_packets; + u32 flows; + u32 drops; + u32 ecn_marks; + u32 overlimit; + u32 overmemory; + u32 collisions; + u32 tx_bytes; + u32 tx_packets; + u32 max_flows; +}; + +/** * struct cfg80211_tid_stats - per-TID statistics * @filled: bitmap of flags using the bits of &enum nl80211_tid_stats to * indicate the relevant values in this struct are filled @@ -1088,6 +1119,7 @@ struct sta_bss_parameters { * @tx_msdu_retries: number of retries (not counting the first) for * transmitted MSDUs * @tx_msdu_failed: number of failed transmitted MSDUs + * @txq_stats: TXQ statistics */ struct cfg80211_tid_stats { u32 filled; @@ -1095,6 +1127,7 @@ struct cfg80211_tid_stats { u64 tx_msdu; u64 tx_msdu_retries; u64 tx_msdu_failed; + struct cfg80211_txq_stats txq_stats; }; #define IEEE80211_MAX_CHAINS 4 @@ -1151,7 +1184,10 @@ struct cfg80211_tid_stats { * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs. + * Note that this doesn't use the @filled bit, but is used if non-NULL. * @ack_signal: signal strength (in dBm) of the last ACK frame. + * @avg_ack_signal: average rssi value of ack packet for the no of msdu's has + * been sent. */ struct station_info { u64 filled; @@ -1195,8 +1231,9 @@ struct station_info { u64 rx_beacon; u64 rx_duration; u8 rx_beacon_signal_avg; - struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1]; + struct cfg80211_tid_stats *pertid; s8 ack_signal; + s8 avg_ack_signal; }; #if IS_ENABLED(CONFIG_CFG80211) @@ -2188,9 +2225,14 @@ struct cfg80211_connect_params { * have to be updated as part of update_connect_params() call. * * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated + * @UPDATE_FILS_ERP_INFO: Indicates that FILS connection parameters (realm, + * username, erp sequence number and rrk) are updated + * @UPDATE_AUTH_TYPE: Indicates that authentication type is updated */ enum cfg80211_connect_params_changed { UPDATE_ASSOC_IES = BIT(0), + UPDATE_FILS_ERP_INFO = BIT(1), + UPDATE_AUTH_TYPE = BIT(2), }; /** @@ -2201,6 +2243,9 @@ enum cfg80211_connect_params_changed { * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed * @WIPHY_PARAM_DYN_ACK: dynack has been enabled + * @WIPHY_PARAM_TXQ_LIMIT: TXQ packet limit has been changed + * @WIPHY_PARAM_TXQ_MEMORY_LIMIT: TXQ memory limit has been changed + * @WIPHY_PARAM_TXQ_QUANTUM: TXQ scheduler quantum */ enum wiphy_params_flags { WIPHY_PARAM_RETRY_SHORT = 1 << 0, @@ -2209,6 +2254,9 @@ enum wiphy_params_flags { WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, WIPHY_PARAM_DYN_ACK = 1 << 5, + WIPHY_PARAM_TXQ_LIMIT = 1 << 6, + WIPHY_PARAM_TXQ_MEMORY_LIMIT = 1 << 7, + WIPHY_PARAM_TXQ_QUANTUM = 1 << 8, }; /** @@ -2961,6 +3009,9 @@ struct cfg80211_external_auth_params { * * @set_multicast_to_unicast: configure multicast to unicast conversion for BSS * + * @get_txq_stats: Get TXQ stats for interface or phy. If wdev is %NULL, this + * function should return phy stats, and interface stats otherwise. + * * @set_pmk: configure the PMK to be used for offloaded 802.1X 4-Way handshake. * If not deleted through @del_pmk the PMK remains valid until disconnect * upon which the driver should clear it. @@ -3262,6 +3313,10 @@ struct cfg80211_ops { struct net_device *dev, const bool enabled); + int (*get_txq_stats)(struct wiphy *wiphy, + struct wireless_dev *wdev, + struct cfg80211_txq_stats *txqstats); + int (*set_pmk)(struct wiphy *wiphy, struct net_device *dev, const struct cfg80211_pmk_conf *conf); int (*del_pmk)(struct wiphy *wiphy, struct net_device *dev, @@ -3806,6 +3861,10 @@ struct wiphy_iftype_ext_capab { * bitmap of &enum nl80211_band values. For instance, for * NL80211_BAND_2GHZ, bit 0 would be set * (i.e. BIT(NL80211_BAND_2GHZ)). + * + * @txq_limit: configuration of internal TX queue frame limit + * @txq_memory_limit: configuration internal TX queue memory limit + * @txq_quantum: configuration of internal TX queue scheduler quantum */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -3940,6 +3999,10 @@ struct wiphy { u8 nan_supported_bands; + u32 txq_limit; + u32 txq_memory_limit; + u32 txq_quantum; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -5363,6 +5426,30 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) #endif /** + * struct cfg80211_fils_resp_params - FILS connection response params + * @kek: KEK derived from a successful FILS connection (may be %NULL) + * @kek_len: Length of @fils_kek in octets + * @update_erp_next_seq_num: Boolean value to specify whether the value in + * @erp_next_seq_num is valid. + * @erp_next_seq_num: The next sequence number to use in ERP message in + * FILS Authentication. This value should be specified irrespective of the + * status for a FILS connection. + * @pmk: A new PMK if derived from a successful FILS connection (may be %NULL). + * @pmk_len: Length of @pmk in octets + * @pmkid: A new PMKID if derived from a successful FILS connection or the PMKID + * used for this FILS connection (may be %NULL). + */ +struct cfg80211_fils_resp_params { + const u8 *kek; + size_t kek_len; + bool update_erp_next_seq_num; + u16 erp_next_seq_num; + const u8 *pmk; + size_t pmk_len; + const u8 *pmkid; +}; + +/** * struct cfg80211_connect_resp_params - Connection response params * @status: Status code, %WLAN_STATUS_SUCCESS for successful connection, use * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you @@ -5380,17 +5467,7 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) * @req_ie_len: Association request IEs length * @resp_ie: Association response IEs (may be %NULL) * @resp_ie_len: Association response IEs length - * @fils_kek: KEK derived from a successful FILS connection (may be %NULL) - * @fils_kek_len: Length of @fils_kek in octets - * @update_erp_next_seq_num: Boolean value to specify whether the value in - * @fils_erp_next_seq_num is valid. - * @fils_erp_next_seq_num: The next sequence number to use in ERP message in - * FILS Authentication. This value should be specified irrespective of the - * status for a FILS connection. - * @pmk: A new PMK if derived from a successful FILS connection (may be %NULL). - * @pmk_len: Length of @pmk in octets - * @pmkid: A new PMKID if derived from a successful FILS connection or the PMKID - * used for this FILS connection (may be %NULL). + * @fils: FILS connection response parameters. * @timeout_reason: Reason for connection timeout. This is used when the * connection fails due to a timeout instead of an explicit rejection from * the AP. %NL80211_TIMEOUT_UNSPECIFIED is used when the timeout reason is @@ -5406,13 +5483,7 @@ struct cfg80211_connect_resp_params { size_t req_ie_len; const u8 *resp_ie; size_t resp_ie_len; - const u8 *fils_kek; - size_t fils_kek_len; - bool update_erp_next_seq_num; - u16 fils_erp_next_seq_num; - const u8 *pmk; - size_t pmk_len; - const u8 *pmkid; + struct cfg80211_fils_resp_params fils; enum nl80211_timeout_reason timeout_reason; }; @@ -5558,6 +5629,7 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid, * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) * @resp_ie_len: assoc response IEs length + * @fils: FILS related roaming information. */ struct cfg80211_roam_info { struct ieee80211_channel *channel; @@ -5567,6 +5639,7 @@ struct cfg80211_roam_info { size_t req_ie_len; const u8 *resp_ie; size_t resp_ie_len; + struct cfg80211_fils_resp_params fils; }; /** @@ -5648,6 +5721,26 @@ void cfg80211_remain_on_channel_expired(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, gfp_t gfp); +/** + * cfg80211_sinfo_alloc_tid_stats - allocate per-tid statistics. + * + * @sinfo: the station information + * @gfp: allocation flags + */ +int cfg80211_sinfo_alloc_tid_stats(struct station_info *sinfo, gfp_t gfp); + +/** + * cfg80211_sinfo_release_content - release contents of station info + * @sinfo: the station information + * + * Releases any potentially allocated sub-information of the station + * information, but not the struct itself (since it's typically on + * the stack.) + */ +static inline void cfg80211_sinfo_release_content(struct station_info *sinfo) +{ + kfree(sinfo->pertid); +} /** * cfg80211_new_sta - notify userspace about station |